Skip to contentSkip to conversation

FAILED: patch "[PATCH] can: flexcan: only change CAN state when link up in system PM" failed to apply to 5.4-stable tree

PATCH [email protected] 1 participant 1 message Mar 24, 2025

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x fd99d6ed20234b83d65b9c5417794343577cf3e5
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025032408-modular-regally-492c@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From fd99d6ed20234b83d65b9c5417794343577cf3e5 Mon Sep 17 00:00:00 2001
From: Haibo Chen <[email protected]>
Date: Fri, 14 Mar 2025 19:01:44 +0800
Subject: [PATCH] can: flexcan: only change CAN state when link up in system PM

After a suspend/resume cycle on a down interface, it will come up as ERROR-ACTIVE.

$ ip -details -s -s a s dev flexcan0
3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10
    link/can  promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
    can state STOPPED (berr-counter tx 0 rx 0) restart-ms 1000
$ sudo systemctl suspend
$ ip -details -s -s a s dev flexcan0
3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10
    link/can  promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
    can state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 1000

And only set CAN state to CAN_STATE_ERROR_ACTIVE when resume process has no issue, otherwise keep in CAN_STATE_SLEEPING as suspend did.

drivers/net/can/flexcan/flexcan-core.c +4 -2
index ac1a860986df..3a71fd235722 100644
@@ -2266,8 +2266,9 @@ static int __maybe_unused flexcan_suspend(struct device *device)
 		}
 		netif_stop_queue(dev);
 		netif_device_detach(dev);
+
+		priv->can.state = CAN_STATE_SLEEPING;
 	}
-	priv->can.state = CAN_STATE_SLEEPING;
 
 	return 0;
 }
@@ -2278,7 +2279,6 @@ static int __maybe_unused flexcan_resume(struct device *device)
 	struct flexcan_priv *priv = netdev_priv(dev);
 	int err;
 
-	priv->can.state = CAN_STATE_ERROR_ACTIVE;
 	if (netif_running(dev)) {
 		netif_device_attach(dev);
 		netif_start_queue(dev);
@@ -2298,6 +2298,8 @@ static int __maybe_unused flexcan_resume(struct device *device)
 
 			flexcan_chip_interrupts_enable(dev);
 		}
+
+		priv->can.state = CAN_STATE_ERROR_ACTIVE;
 	}
 
 	return 0;