sunxi: h616: defconfigs: enable eMMC
PATCH 1/1 sunxi: h616: defconfigs: enable eMMC
Now that eMMC is working properly on H616 devices, it became apparent that some boards were missing the right defconfig bits to enable eMMC access.
Add the eMMC device number to the Tanix TX1 and the X96 Mate defconfig, also the eMMC boot option to the TX1. Oddly enough the X96 Mate had just this bit already.
--- configs/tanix_tx1_defconfig | 2 ++ configs/x96_mate_defconfig | 1 + 2 files changed, 3 insertions(+)
configs/tanix_tx1_defconfig +2 -0
@@ -14,11 +14,13 @@ CONFIG_MACH_SUN50I_H616=y CONFIG_SUNXI_DRAM_H616_LPDDR3=y CONFIG_R_I2C_ENABLE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_SPL_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_AXP313_POWER=y CONFIG_AXP_DCDC3_VOLT=1200 CONFIG_USB_EHCI_HCD=y
configs/x96_mate_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_DRAM_SUNXI_TPR11=0xffffdddd CONFIG_DRAM_SUNXI_TPR12=0xfedf7557 CONFIG_MACH_SUN50I_H616=y CONFIG_SUNXI_DRAM_H616_DDR3_1333=y +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_R_I2C_ENABLE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y
Signature · 1 line
2.46.3
Dne četrtek, 27. marec 2025 ob 22:21:02 Srednjeevropski standardni čas je Andre Przywara napisal(a):
Quoted 9 lines
Now that eMMC is working properly on H616 devices, it became apparent that some boards were missing the right defconfig bits to enable eMMC access.
Add the eMMC device number to the Tanix TX1 and the X96 Mate defconfig, also the eMMC boot option to the TX1. Oddly enough the X96 Mate had just this bit already.
Signed-off-by Andre Przywara <[email protected]>
Expected consequence of the fix :)
Best regards,
Jernej
Quoted 36 lines
--- configs/tanix_tx1_defconfig | 2 ++ configs/x96_mate_defconfig | 1 + 2 files changed, 3 insertions(+)configs/tanix_tx1_defconfig +2
-0@@ -14,11 +14,13 @@ CONFIG_MACH_SUN50I_H616=y CONFIG_SUNXI_DRAM_H616_LPDDR3=y CONFIG_R_I2C_ENABLE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_SPL_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_AXP313_POWER=y CONFIG_AXP_DCDC3_VOLT=1200 CONFIG_USB_EHCI_HCD=yconfigs/x96_mate_defconfig +1
-0@@ -11,6 +11,7 @@ CONFIG_DRAM_SUNXI_TPR11=0xffffdddd CONFIG_DRAM_SUNXI_TPR12=0xfedf7557 CONFIG_MACH_SUN50I_H616=y CONFIG_SUNXI_DRAM_H616_DDR3_1333=y +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_R_I2C_ENABLE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y