Skip to contentSkip to conversation

page_pool: avoid infinite loop to schedule delayed worker

PATCH In review Sasha Levin 2 participants 17 messages Apr 3, 2025 – Apr 18, 2025

Subsystems (8)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/15 page_pool: avoid infinite loop to schedule delayed worker

From: Jason Xing <[email protected]>

[ Upstream commit 43130d02baa137033c25297aaae95fd0edc41654 ]

We noticed the kworker in page_pool_release_retry() was waken up repeatedly and infinitely in production because of the buggy driver causing the inflight less than 0 and warning us in page_pool_inflight()[1].

Since the inflight value goes negative, it means we should not expect the whole page_pool to get back to work normally.

This patch mitigates the adverse effect by not rescheduling the kworker when detecting the inflight negative in page_pool_release_retry().

[1]

[Mon Feb 10 20:36:11 2025] ------------[ cut here ]------------
[Mon Feb 10 20:36:11 2025] Negative(-51446) inflight packet-pages
...
[Mon Feb 10 20:36:11 2025] Call Trace:
[Mon Feb 10 20:36:11 2025]  page_pool_release_retry+0x23/0x70
[Mon Feb 10 20:36:11 2025]  process_one_work+0x1b1/0x370
[Mon Feb 10 20:36:11 2025]  worker_thread+0x37/0x3a0
[Mon Feb 10 20:36:11 2025]  kthread+0x11a/0x140
[Mon Feb 10 20:36:11 2025]  ? process_one_work+0x370/0x370
[Mon Feb 10 20:36:11 2025]  ? __kthread_cancel_work+0x40/0x40
[Mon Feb 10 20:36:11 2025]  ret_from_fork+0x35/0x40
[Mon Feb 10 20:36:11 2025] ---[ end trace ebffe800f33e7e34 ]---

Note: before this patch, the above calltrace would flood the dmesg due to repeated reschedule of release_dw kworker.

---
 net/core/page_pool.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
net/core/page_pool.c +7 -1
index 08fbf4049c108..a11809b3149b4 100644
@@ -485,7 +485,13 @@ static void page_pool_release_retry(struct work_struct *wq)
 	int inflight;
 
 	inflight = page_pool_release(pool);
-	if (!inflight)
+	/* In rare cases, a driver bug may cause inflight to go negative.
+	 * Don't reschedule release if inflight is 0 or negative.
+	 * - If 0, the page_pool has been destroyed
+	 * - if negative, we will never recover
+	 * in both cases no reschedule is necessary.
+	 */
+	if (inflight <= 0)
 		return;
 
 	/* Periodic warning */
Signature · 1 line
2.39.5
author maintainer
#1 lore raw

PATCH 2/15 fs/jfs: cast inactags to s64 to prevent potential overflow

From: Rand Deeb <[email protected]>

[ Upstream commit 70ca3246ad201b53a9f09380b3f29d8bac320383 ]

The expression "inactags << bmp->db_agl2size" in the function dbFinalizeBmap() is computed using int operands. Although the values (inactags and db_agl2size) are derived from filesystem parameters and are usually small, there is a theoretical risk that the shift could overflow a 32-bit int if extreme values occur.

According to the C standard, shifting a signed 32-bit int can lead to undefined behavior if the result exceeds its range. In our case, an overflow could miscalculate free blocks, potentially leading to erroneous filesystem accounting.

To ensure the arithmetic is performed in 64-bit space, we cast "inactags" to s64 before shifting. This defensive fix prevents any risk of overflow and complies with kernel coding best practices.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

---
 fs/jfs/jfs_dmap.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
fs/jfs/jfs_dmap.c +2 -2
index ef220709c7f51..389dafd23d15e 100644
@@ -3728,8 +3728,8 @@ void dbFinalizeBmap(struct inode *ipbmap)
 	 * system size is not a multiple of the group size).
 	 */
 	inactfree = (inactags && ag_rem) ?
-	    ((inactags - 1) << bmp->db_agl2size) + ag_rem
-	    : inactags << bmp->db_agl2size;
+	    (((s64)inactags - 1) << bmp->db_agl2size) + ag_rem
+	    : ((s64)inactags << bmp->db_agl2size);
 
 	/* determine how many free blocks are in the active
 	 * allocation groups plus the average number of free blocks
Signature · 1 line
2.39.5
author maintainer
#2 lore raw

PATCH 3/15 fs/jfs: Prevent integer overflow in AG size calculation

In reply to Sasha Levin

From: Rand Deeb <[email protected]>

[ Upstream commit 7fcbf789629cdb9fbf4e2172ce31136cfed11e5e ]

The JFS filesystem calculates allocation group (AG) size using 1 << l2agsize in dbExtendFS(). When l2agsize exceeds 31 (possible with >2TB aggregates on 32-bit systems), this 32-bit shift operation causes undefined behavior and improper AG sizing.

On 32-bit architectures:
- Left-shifting 1 by 32+ bits results in 0 due to integer overflow
- This creates invalid AG sizes (0 or garbage values) in sbi->bmap->db_agsize
- Subsequent block allocations would reference invalid AG structures
- Could lead to:
- Filesystem corruption during extend operations
- Kernel crashes due to invalid memory accesses
- Security vulnerabilities via malformed on-disk structures

Fix by casting to s64 before shifting:
bmp->db_agsize = (s64)1 << l2agsize;

This ensures 64-bit arithmetic even on 32-bit architectures. The cast matches the data type of db_agsize (s64) and follows similar patterns in JFS block calculation code.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

---
 fs/jfs/jfs_dmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/jfs/jfs_dmap.c +1 -1
index 389dafd23d15e..3cc10f9bf9f8b 100644
@@ -3465,7 +3465,7 @@ int dbExtendFS(struct inode *ipbmap, s64 blkno,	s64 nblocks)
 	oldl2agsize = bmp->db_agl2size;
 
 	bmp->db_agl2size = l2agsize;
-	bmp->db_agsize = 1 << l2agsize;
+	bmp->db_agsize = (s64)1 << l2agsize;
 
 	/* compute new number of AG */
 	agno = bmp->db_numag;
Signature · 1 line
2.39.5
author maintainer
#3 lore raw

PATCH 4/15 jfs: Prevent copying of nlink with value 0 from disk inode

In reply to Sasha Levin

From: Edward Adam Davis <[email protected]>

[ Upstream commit b61e69bb1c049cf507e3c654fa3dc1568231bd07 ]

syzbot report a deadlock in diFree. [1]

When calling "ioctl$LOOP_SET_STATUS64", the offset value passed in is 4, which does not match the mounted loop device, causing the mapping of the mounted loop device to be invalidated.

When creating the directory and creating the inode of iag in diReadSpecial(), read the page of fixed disk inode (AIT) in raw mode in read_metapage(), the metapage data it returns is corrupted, which causes the nlink value of 0 to be assigned to the iag inode when executing copy_from_dinode(), which ultimately causes a deadlock when entering diFree().

To avoid this, first check the nlink value of dinode before setting iag inode.

[1]
WARNING: possible recursive locking detected
6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Not tainted
--------------------------------------------
syz-executor301/5309 is trying to acquire lock:
ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889

but task is already holding lock:
ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630

other info that might help us debug this:

 Possible unsafe locking scenario:
       CPU0
       ----

lock(&(imap->im_aglock[index]));
lock(&(imap->im_aglock[index]));

*** DEADLOCK ***

May be due to missing lock nesting notation

5 locks held by syz-executor301/5309:
#0: ffff8880422a4420 (sb_writers#9){.+.+}-{0:0}, at: mnt_want_write+0x3f/0x90 fs/namespace.c:515 #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: inode_lock_nested include/linux/fs.h:850 [inline] #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: filename_create+0x260/0x540 fs/namei.c:4026 #2: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630
#3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2460 [inline] #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline] #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocAG+0x4b7/0x1e50 fs/jfs/jfs_imap.c:1669 #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2477 [inline] #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline] #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocAG+0x869/0x1e50 fs/jfs/jfs_imap.c:1669

stack backtrace:
CPU: 0 UID: 0 PID: 5309 Comm: syz-executor301 Not tainted 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
 print_deadlock_bug+0x483/0x620 kernel/locking/lockdep.c:3037
 check_deadlock kernel/locking/lockdep.c:3089 [inline]
 validate_chain+0x15e2/0x5920 kernel/locking/lockdep.c:3891
 __lock_acquire+0x1384/0x2050 kernel/locking/lockdep.c:5202
 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825
 __mutex_lock_common kernel/locking/mutex.c:608 [inline]
 __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752
 diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889
 jfs_evict_inode+0x32d/0x440 fs/jfs/inode.c:156
 evict+0x4e8/0x9b0 fs/inode.c:725
 diFreeSpecial fs/jfs/jfs_imap.c:552 [inline]
 duplicateIXtree+0x3c6/0x550 fs/jfs/jfs_imap.c:3022
 diNewIAG fs/jfs/jfs_imap.c:2597 [inline]
 diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
 diAllocAG+0x17dc/0x1e50 fs/jfs/jfs_imap.c:1669
 diAlloc+0x1d2/0x1630 fs/jfs/jfs_imap.c:1590
 ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56
 jfs_mkdir+0x1c5/0xba0 fs/jfs/namei.c:225
 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257
 do_mkdirat+0x264/0x3a0 fs/namei.c:4280
 __do_sys_mkdirat fs/namei.c:4295 [inline]
 __se_sys_mkdirat fs/namei.c:4293 [inline]
 __x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
---
 fs/jfs/jfs_imap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/jfs/jfs_imap.c +1 -1
index da3a1c27d3498..84e2c67c9070f 100644
@@ -458,7 +458,7 @@ struct inode *diReadSpecial(struct super_block *sb, ino_t inum, int secondary)
 	dp += inum % 8;		/* 8 inodes per 4K page */
 
 	/* copy on-disk inode to in-memory inode */
-	if ((copy_from_dinode(dp, ip)) != 0) {
+	if ((copy_from_dinode(dp, ip) != 0) || (ip->i_nlink == 0)) {
 		/* handle bad return by returning NULL for ip */
 		set_nlink(ip, 1);	/* Don't want iput() deleting it */
 		iput(ip);
Signature · 1 line
2.39.5
author maintainer
#4 lore raw

PATCH 5/15 jfs: add sanity check for agwidth in dbMount

In reply to Sasha Levin

From: Edward Adam Davis <[email protected]>

[ Upstream commit ddf2846f22e8575d6b4b6a66f2100f168b8cd73d ]

The width in dmapctl of the AG is zero, it trigger a divide error when calculating the control page level in dbAllocAG.

To avoid this issue, add a check for agwidth in dbAllocAG.

---
 fs/jfs/jfs_dmap.c | 4 ++++
 1 file changed, 4 insertions(+)
fs/jfs/jfs_dmap.c +4 -0
index 3cc10f9bf9f8b..8f4c55c711ba0 100644
@@ -204,6 +204,10 @@ int dbMount(struct inode *ipbmap)
 	bmp->db_aglevel = le32_to_cpu(dbmp_le->dn_aglevel);
 	bmp->db_agheight = le32_to_cpu(dbmp_le->dn_agheight);
 	bmp->db_agwidth = le32_to_cpu(dbmp_le->dn_agwidth);
+	if (!bmp->db_agwidth) {
+		err = -EINVAL;
+		goto err_release_metapage;
+	}
 	bmp->db_agstart = le32_to_cpu(dbmp_le->dn_agstart);
 	bmp->db_agl2size = le32_to_cpu(dbmp_le->dn_agl2size);
 	if (bmp->db_agl2size > L2MAXL2SIZE - L2MAXAG ||
Signature · 1 line
2.39.5
author maintainer
#5 lore raw

PATCH 6/15 ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode

In reply to Sasha Levin

From: Niklas Cassel <[email protected]>

[ Upstream commit 91ec84f8eaddbc93d7c62e363d68aeb7b89879c7 ]

atapi_eh_request_sense() currently uses ATAPI DMA if the SATA controller has ATA_FLAG_PIO_DMA (PIO cmds via DMA) set.

However, ATA_FLAG_PIO_DMA is a flag that can be set by a low-level driver on a port at initialization time, before any devices are scanned.

If a controller detects a connected device that only supports PIO, we set the flag ATA_DFLAG_PIO.

Modify atapi_eh_request_sense() to not use ATAPI DMA if the connected device only supports PIO.

---
 drivers/ata/libata-eh.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/ata/libata-eh.c +9 -2
index 48130b2543966..e700024a8b482 100644
@@ -1479,8 +1479,15 @@ unsigned int atapi_eh_request_sense(struct ata_device *dev,
 	tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
 	tf.command = ATA_CMD_PACKET;
 
-	/* is it pointless to prefer PIO for "safety reasons"? */
-	if (ap->flags & ATA_FLAG_PIO_DMA) {
+	/*
+	 * Do not use DMA if the connected device only supports PIO, even if the
+	 * port prefers PIO commands via DMA.
+	 *
+	 * Ideally, we should call atapi_check_dma() to check if it is safe for
+	 * the LLD to use DMA for REQUEST_SENSE, but we don't have a qc.
+	 * Since we can't check the command, perhaps we should only use pio?
+	 */
+	if ((ap->flags & ATA_FLAG_PIO_DMA) && !(dev->flags & ATA_DFLAG_PIO)) {
 		tf.protocol = ATAPI_PROT_DMA;
 		tf.feature |= ATAPI_PKT_DMA;
 	} else {
Signature · 1 line
2.39.5
author maintainer
#6 lore raw

PATCH 7/15 f2fs: fix to avoid out-of-bounds access in f2fs_truncate_inode_blocks()

In reply to Sasha Levin

From: Chao Yu <[email protected]>

[ Upstream commit e6494977bd4a83862118a05f57a8df40256951c0 ]

syzbot reports an UBSAN issue as below:

------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in fs/f2fs/node.h:381:10
index 18446744073709550692 is out of range for type '__le32[5]' (aka 'unsigned int[5]')
CPU: 0 UID: 0 PID: 5318 Comm: syz.0.0 Not tainted 6.14.0-rc3-syzkaller-00060-g6537cfb395f3 #0
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
 ubsan_epilogue lib/ubsan.c:231 [inline]
 __ubsan_handle_out_of_bounds+0x121/0x150 lib/ubsan.c:429
 get_nid fs/f2fs/node.h:381 [inline]
 f2fs_truncate_inode_blocks+0xa5e/0xf60 fs/f2fs/node.c:1181
 f2fs_do_truncate_blocks+0x782/0x1030 fs/f2fs/file.c:808
 f2fs_truncate_blocks+0x10d/0x300 fs/f2fs/file.c:836
 f2fs_truncate+0x417/0x720 fs/f2fs/file.c:886
 f2fs_file_write_iter+0x1bdb/0x2550 fs/f2fs/file.c:5093
 aio_write+0x56b/0x7c0 fs/aio.c:1633
 io_submit_one+0x8a7/0x18a0 fs/aio.c:2052
 __do_sys_io_submit fs/aio.c:2111 [inline]
 __se_sys_io_submit+0x171/0x2e0 fs/aio.c:2081
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f238798cde9

index 18446744073709550692 (decimal, unsigned long long) = 0xfffffffffffffc64 (hexadecimal, unsigned long long) = -924 (decimal, long long)

In f2fs_truncate_inode_blocks(), UBSAN detects that get_nid() tries to access .i_nid[-924], it means both offset[0] and level should zero.

The possible case should be in f2fs_do_truncate_blocks(), we try to truncate inode size to zero, however, dn.ofs_in_node is zero and dn.node_page is not an inode page, so it fails to truncate inode page, and then pass zeroed free_from to f2fs_truncate_inode_blocks(), result in this issue.

	if (dn.ofs_in_node || IS_INODE(dn.node_page)) {
		f2fs_truncate_data_blocks_range(&dn, count);
		free_from += count;
	}

I guess the reason why dn.node_page is not an inode page could be: there are multiple nat entries share the same node block address, once the node block address was reused, f2fs_get_node_page() may load a non-inode block.

Let's add a sanity check for such condition to avoid out-of-bounds access issue.

---
 fs/f2fs/node.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
fs/f2fs/node.c +8 -1
index 348ad1d6199ff..57baaba17174d 100644
@@ -1047,7 +1047,14 @@ int f2fs_truncate_inode_blocks(struct inode *inode, pgoff_t from)
 	trace_f2fs_truncate_inode_blocks_enter(inode, from);
 
 	level = get_node_path(inode, from, offset, noffset);
-	if (level < 0) {
+	if (level <= 0) {
+		if (!level) {
+			level = -EFSCORRUPTED;
+			f2fs_err(sbi, "%s: inode ino=%lx has corrupted node block, from:%lu addrs:%u",
+					__func__, inode->i_ino,
+					from, ADDRS_PER_INODE(inode));
+			set_sbi_flag(sbi, SBI_NEED_FSCK);
+		}
 		trace_f2fs_truncate_inode_blocks_exit(inode, level);
 		return level;
 	}
Signature · 1 line
2.39.5
author maintainer
#7 lore raw

PATCH 8/15 ahci: add PCI ID for Marvell 88SE9215 SATA Controller

In reply to Sasha Levin

From: Daniel Kral <[email protected]>

[ Upstream commit 885251dc35767b1c992f6909532ca366c830814a ]

Add support for Marvell Technology Group Ltd. 88SE9215 SATA 6 Gb/s controller, which is e.g. used in the DAWICONTROL DC-614e RAID bus controller and was not automatically recognized before.

Tested with a DAWICONTROL DC-614e RAID bus controller.

---
 drivers/ata/ahci.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/ata/ahci.c +2 -0
index 04b53bb7a692d..2bb9555663e75 100644
@@ -591,6 +591,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	  .driver_data = board_ahci_yes_fbs },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3),
 	  .driver_data = board_ahci_yes_fbs },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9215),
+	  .driver_data = board_ahci_yes_fbs },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230),
 	  .driver_data = board_ahci_yes_fbs },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0642), /* highpoint rocketraid 642L */
Signature · 1 line
2.39.5
author maintainer
#8 lore raw

PATCH 9/15 ext4: protect ext4_release_dquot against freezing

In reply to Sasha Levin

From: Ojaswin Mujoo <[email protected]>

[ Upstream commit 530fea29ef82e169cd7fe048c2b7baaeb85a0028 ]

Protect ext4_release_dquot against freezing so that we don't try to start a transaction when FS is frozen, leading to warnings.

Further, avoid taking the freeze protection if a transaction is already running so that we don't need end up in a deadlock as described in

46e294efc355 ext4: fix deadlock with fs freezing and EA inodes

---
 fs/ext4/super.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
fs/ext4/super.c +17 -0
index 9d7800d66200e..be4d863da0ebc 100644
@@ -6244,12 +6244,25 @@ static int ext4_release_dquot(struct dquot *dquot)
 {
 	int ret, err;
 	handle_t *handle;
+	bool freeze_protected = false;
+
+	/*
+	 * Trying to sb_start_intwrite() in a running transaction
+	 * can result in a deadlock. Further, running transactions
+	 * are already protected from freezing.
+	 */
+	if (!ext4_journal_current_handle()) {
+		sb_start_intwrite(dquot->dq_sb);
+		freeze_protected = true;
+	}
 
 	handle = ext4_journal_start(dquot_to_inode(dquot), EXT4_HT_QUOTA,
 				    EXT4_QUOTA_DEL_BLOCKS(dquot->dq_sb));
 	if (IS_ERR(handle)) {
 		/* Release dquot anyway to avoid endless cycle in dqput() */
 		dquot_release(dquot);
+		if (freeze_protected)
+			sb_end_intwrite(dquot->dq_sb);
 		return PTR_ERR(handle);
 	}
 	ret = dquot_release(dquot);
@@ -6260,6 +6273,10 @@ static int ext4_release_dquot(struct dquot *dquot)
 	err = ext4_journal_stop(handle);
 	if (!ret)
 		ret = err;
+
+	if (freeze_protected)
+		sb_end_intwrite(dquot->dq_sb);
+
 	return ret;
 }
 
Signature · 1 line
2.39.5
author maintainer
#9 lore raw

PATCH 10/15 ext4: ignore xattrs past end

In reply to Sasha Levin

From: Bhupesh <[email protected]>

[ Upstream commit c8e008b60492cf6fd31ef127aea6d02fd3d314cd ]

Once inside 'ext4_xattr_inode_dec_ref_all' we should ignore xattrs entries past the 'end' entry.

This fixes the following KASAN reported issue:

==================================================================

BUG: KASAN: slab-use-after-free in ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
Read of size 4 at addr ffff888012c120c4 by task repro/2065

CPU: 1 UID: 0 PID: 2065 Comm: repro Not tainted 6.13.0-rc2+ #11
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x1fd/0x300
 ? tcp_gro_dev_warn+0x260/0x260
 ? _printk+0xc0/0x100
 ? read_lock_is_recursive+0x10/0x10
 ? irq_work_queue+0x72/0xf0
 ? __virt_addr_valid+0x17b/0x4b0
 print_address_description+0x78/0x390
 print_report+0x107/0x1f0
 ? __virt_addr_valid+0x17b/0x4b0
 ? __virt_addr_valid+0x3ff/0x4b0
 ? __phys_addr+0xb5/0x160
 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
 kasan_report+0xcc/0x100
 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
 ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
 ? ext4_xattr_delete_inode+0xd30/0xd30
 ? __ext4_journal_ensure_credits+0x5f0/0x5f0
 ? __ext4_journal_ensure_credits+0x2b/0x5f0
 ? inode_update_timestamps+0x410/0x410
 ext4_xattr_delete_inode+0xb64/0xd30
 ? ext4_truncate+0xb70/0xdc0
 ? ext4_expand_extra_isize_ea+0x1d20/0x1d20
 ? __ext4_mark_inode_dirty+0x670/0x670
 ? ext4_journal_check_start+0x16f/0x240
 ? ext4_inode_is_fast_symlink+0x2f2/0x3a0
 ext4_evict_inode+0xc8c/0xff0
 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0
 ? do_raw_spin_unlock+0x53/0x8a0
 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0
 evict+0x4ac/0x950
 ? proc_nr_inodes+0x310/0x310
 ? trace_ext4_drop_inode+0xa2/0x220
 ? _raw_spin_unlock+0x1a/0x30
 ? iput+0x4cb/0x7e0
 do_unlinkat+0x495/0x7c0
 ? try_break_deleg+0x120/0x120
 ? 0xffffffff81000000
 ? __check_object_size+0x15a/0x210
 ? strncpy_from_user+0x13e/0x250
 ? getname_flags+0x1dc/0x530
 __x64_sys_unlinkat+0xc8/0xf0
 do_syscall_64+0x65/0x110
 entry_SYSCALL_64_after_hwframe+0x67/0x6f
RIP: 0033:0x434ffd
Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8
RSP: 002b:00007ffc50fa7b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000107
RAX: ffffffffffffffda RBX: 00007ffc50fa7e18 RCX: 0000000000434ffd
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005
RBP: 00007ffc50fa7be0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007ffc50fa7e08 R14: 00000000004bbf30 R15: 0000000000000001
 </TASK>

The buggy address belongs to the object at ffff888012c12000
 which belongs to the cache filp of size 360

The buggy address is located 196 bytes inside of
freed 360-byte region [ffff888012c12000, ffff888012c12168)

The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12c12
head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x40(head|node=0|zone=0)
page_type: f5(slab)
raw: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004
raw: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000

head: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004
head: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000
head: 0000000000000001 ffffea00004b0481 ffffffffffffffff 0000000000000000
head: 0000000000000002 0000000000000000 00000000ffffffff 0000000000000000

page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888012c11f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff888012c12000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Quoted 1 line

ffff888012c12080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

                                           ^

ffff888012c12100: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
ffff888012c12180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

---
 fs/ext4/xattr.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
fs/ext4/xattr.c +10 -1
index d1d930d09cb8a..4eb75216218a0 100644
@@ -1123,15 +1123,24 @@ ext4_xattr_inode_dec_ref_all(handle_t *handle, struct inode *parent,
 {
 	struct inode *ea_inode;
 	struct ext4_xattr_entry *entry;
+	struct ext4_iloc iloc;
 	bool dirty = false;
 	unsigned int ea_ino;
 	int err;
 	int credits;
+	void *end;
+
+	if (block_csum)
+		end = (void *)bh->b_data + bh->b_size;
+	else {
+		ext4_get_inode_loc(parent, &iloc);
+		end = (void *)ext4_raw_inode(&iloc) + EXT4_SB(parent->i_sb)->s_inode_size;
+	}
 
 	/* One credit for dec ref on ea_inode, one for orphan list addition, */
 	credits = 2 + extra_credits;
 
-	for (entry = first; !IS_LAST_ENTRY(entry);
+	for (entry = first; (void *)entry < end && !IS_LAST_ENTRY(entry);
 	     entry = EXT4_XATTR_NEXT(entry)) {
 		if (!entry->e_value_inum)
 			continue;
Signature · 1 line
2.39.5
author maintainer
#10 lore raw

PATCH 11/15 scsi: st: Fix array overflow in st_setup()

In reply to Sasha Levin

From: Kai Mäkisara <[email protected]>

[ Upstream commit a018d1cf990d0c339fe0e29b762ea5dc10567d67 ]

Change the array size to follow parms size instead of a fixed value.

---
 drivers/scsi/st.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/st.c +1 -1
index 3b819c6b15a56..465fe83b49e98 100644
@@ -4144,7 +4144,7 @@ static void validate_options(void)
  */
 static int __init st_setup(char *str)
 {
-	int i, len, ints[5];
+	int i, len, ints[ARRAY_SIZE(parms) + 1];
 	char *stp;
 
 	stp = get_options(str, ARRAY_SIZE(ints), ints);
Signature · 1 line
2.39.5
author maintainer
#11 lore raw

PATCH 12/15 wifi: mt76: mt76x2u: add TP-Link TL-WDN6200 ID to device table

In reply to Sasha Levin

From: Icenowy Zheng <[email protected]>

[ Upstream commit 06cccc2ebbe6c8a20f714f3a0ff3ff489d3004bb ]

The TP-Link TL-WDN6200 "Driverless" version cards use a MT7612U chipset.

Add the USB ID to mt76x2u driver.

---
 drivers/net/wireless/mediatek/mt76/mt76x2/usb.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/mediatek/mt76/mt76x2/usb.c +1 -0
index 4e003c7b62cf6..82a193aac09d7 100644
@@ -21,6 +21,7 @@ static const struct usb_device_id mt76x2u_device_table[] = {
 	{ USB_DEVICE(0x0846, 0x9053) },	/* Netgear A6210 */
 	{ USB_DEVICE(0x045e, 0x02e6) },	/* XBox One Wireless Adapter */
 	{ USB_DEVICE(0x045e, 0x02fe) },	/* XBox One Wireless Adapter */
+	{ USB_DEVICE(0x2357, 0x0137) },	/* TP-Link TL-WDN6200 */
 	{ },
 };
 
Signature · 1 line
2.39.5
author maintainer
#12 lore raw

PATCH 13/15 net: vlan: don't propagate flags on open

In reply to Sasha Levin

From: Stanislav Fomichev <[email protected]>

[ Upstream commit 27b918007d96402aba10ed52a6af8015230f1793 ]

With the device instance lock, there is now a possibility of a deadlock:

[    1.211455] ============================================
[    1.211571] WARNING: possible recursive locking detected
[    1.211687] 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 Not tainted
[    1.211823] --------------------------------------------
[    1.211936] ip/184 is trying to acquire lock:
[    1.212032] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_set_allmulti+0x4e/0xb0
[    1.212207]
[    1.212207] but task is already holding lock:
[    1.212332] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[    1.212487]
[    1.212487] other info that might help us debug this:
[    1.212626]  Possible unsafe locking scenario:
[    1.212626]
[    1.212751]        CPU0
[    1.212815]        ----
[    1.212871]   lock(&dev->lock);
[    1.212944]   lock(&dev->lock);
[    1.213016]
[    1.213016]  *** DEADLOCK ***
[    1.213016]
[    1.213143]  May be due to missing lock nesting notation
[    1.213143]
[    1.213294] 3 locks held by ip/184:
[    1.213371]  #0: ffffffff838b53e0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x1b/0xa0
[    1.213543]  #1: ffffffff84e5fc70 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x37/0xa0
[    1.213727]  #2: ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[    1.213895]
[    1.213895] stack backtrace:
[    1.213991] CPU: 0 UID: 0 PID: 184 Comm: ip Not tainted 6.14.0-rc5-01215-g032756b4ca7a-dirty #5
[    1.213993] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[    1.213994] Call Trace:
[    1.213995]  <TASK>
[    1.213996]  dump_stack_lvl+0x8e/0xd0
[    1.214000]  print_deadlock_bug+0x28b/0x2a0
[    1.214020]  lock_acquire+0xea/0x2a0
[    1.214027]  __mutex_lock+0xbf/0xd40
[    1.214038]  dev_set_allmulti+0x4e/0xb0 # real_dev->flags & IFF_ALLMULTI
[    1.214040]  vlan_dev_open+0xa5/0x170 # ndo_open on vlandev
[    1.214042]  __dev_open+0x145/0x270
[    1.214046]  __dev_change_flags+0xb0/0x1e0
[    1.214051]  netif_change_flags+0x22/0x60 # IFF_UP vlandev
[    1.214053]  dev_change_flags+0x61/0xb0 # for each device in group from dev->vlan_info
[    1.214055]  vlan_device_event+0x766/0x7c0 # on netdevsim0
[    1.214058]  notifier_call_chain+0x78/0x120
[    1.214062]  netif_open+0x6d/0x90
[    1.214064]  dev_open+0x5b/0xb0 # locks netdevsim0
[    1.214066]  bond_enslave+0x64c/0x1230
[    1.214075]  do_set_master+0x175/0x1e0 # on netdevsim0
[    1.214077]  do_setlink+0x516/0x13b0
[    1.214094]  rtnl_newlink+0xaba/0xb80
[    1.214132]  rtnetlink_rcv_msg+0x440/0x490
[    1.214144]  netlink_rcv_skb+0xeb/0x120
[    1.214150]  netlink_unicast+0x1f9/0x320
[    1.214153]  netlink_sendmsg+0x346/0x3f0
[    1.214157]  __sock_sendmsg+0x86/0xb0
[    1.214160]  ____sys_sendmsg+0x1c8/0x220
[    1.214164]  ___sys_sendmsg+0x28f/0x2d0
[    1.214179]  __x64_sys_sendmsg+0xef/0x140
[    1.214184]  do_syscall_64+0xec/0x1d0
[    1.214190]  entry_SYSCALL_64_after_hwframe+0x77/0x7f
[    1.214191] RIP: 0033:0x7f2d1b4a7e56

Device setup:

netdevsim0 (down)
^ ^
bond netdevsim1.100@netdevsim1 allmulticast=on (down)

When we enslave the lower device (netdevsim0) which has a vlan, we propagate vlan's allmuti/promisc flags during ndo_open. This causes (re)locking on of the real_dev.

Propagate allmulti/promisc on flags change, not on the open. There is a slight semantics change that vlans that are down now propagate the flags, but this seems unlikely to result in the real issues.

Reproducer:

echo 0 1 > /sys/bus/netdevsim/new_device

  dev_path=$(ls -d /sys/bus/netdevsim/devices/netdevsim0/net/*)
  dev=$(echo $dev_path | rev | cut -d/ -f1 | rev)

ip link set dev $dev name netdevsim0
ip link set dev netdevsim0 up

ip link add link netdevsim0 name netdevsim0.100 type vlan id 100 ip link set dev netdevsim0.100 allmulticast on down ip link add name bond1 type bond mode 802.3ad
ip link set dev netdevsim0 down
ip link set dev netdevsim0 master bond1
ip link set dev bond1 up
ip link show

---
 net/8021q/vlan_dev.c | 31 ++++---------------------------
 1 file changed, 4 insertions(+), 27 deletions(-)
net/8021q/vlan_dev.c +4 -27
index b7cf430006e55..c134f8210b21b 100644
@@ -272,17 +272,6 @@ static int vlan_dev_open(struct net_device *dev)
 			goto out;
 	}
 
-	if (dev->flags & IFF_ALLMULTI) {
-		err = dev_set_allmulti(real_dev, 1);
-		if (err < 0)
-			goto del_unicast;
-	}
-	if (dev->flags & IFF_PROMISC) {
-		err = dev_set_promiscuity(real_dev, 1);
-		if (err < 0)
-			goto clear_allmulti;
-	}
-
 	ether_addr_copy(vlan->real_dev_addr, real_dev->dev_addr);
 
 	if (vlan->flags & VLAN_FLAG_GVRP)
@@ -296,12 +285,6 @@ static int vlan_dev_open(struct net_device *dev)
 		netif_carrier_on(dev);
 	return 0;
 
-clear_allmulti:
-	if (dev->flags & IFF_ALLMULTI)
-		dev_set_allmulti(real_dev, -1);
-del_unicast:
-	if (!ether_addr_equal(dev->dev_addr, real_dev->dev_addr))
-		dev_uc_del(real_dev, dev->dev_addr);
 out:
 	netif_carrier_off(dev);
 	return err;
@@ -314,10 +297,6 @@ static int vlan_dev_stop(struct net_device *dev)
 
 	dev_mc_unsync(real_dev, dev);
 	dev_uc_unsync(real_dev, dev);
-	if (dev->flags & IFF_ALLMULTI)
-		dev_set_allmulti(real_dev, -1);
-	if (dev->flags & IFF_PROMISC)
-		dev_set_promiscuity(real_dev, -1);
 
 	if (!ether_addr_equal(dev->dev_addr, real_dev->dev_addr))
 		dev_uc_del(real_dev, dev->dev_addr);
@@ -474,12 +453,10 @@ static void vlan_dev_change_rx_flags(struct net_device *dev, int change)
 {
 	struct net_device *real_dev = vlan_dev_priv(dev)->real_dev;
 
-	if (dev->flags & IFF_UP) {
-		if (change & IFF_ALLMULTI)
-			dev_set_allmulti(real_dev, dev->flags & IFF_ALLMULTI ? 1 : -1);
-		if (change & IFF_PROMISC)
-			dev_set_promiscuity(real_dev, dev->flags & IFF_PROMISC ? 1 : -1);
-	}
+	if (change & IFF_ALLMULTI)
+		dev_set_allmulti(real_dev, dev->flags & IFF_ALLMULTI ? 1 : -1);
+	if (change & IFF_PROMISC)
+		dev_set_promiscuity(real_dev, dev->flags & IFF_PROMISC ? 1 : -1);
 }
 
 static void vlan_dev_set_rx_mode(struct net_device *vlan_dev)
Signature · 1 line
2.39.5
#13 lore raw

Re: [PATCH AUTOSEL 5.10 13/15] net: vlan: don't propagate flags on open

Quoted 5 lines · Sasha Levin

From: Stanislav Fomichev <[email protected]>

[ Upstream commit 27b918007d96402aba10ed52a6af8015230f1793 ]

With the device instance lock, there is now a possibility of a deadlock:

"now". Does the same problem exist in 5.10?

Best regards,
Pavel

Quoted 61 lines
net/8021q/vlan_dev.c +4 -27
@@ -272,17 +272,6 @@ static int vlan_dev_open(struct net_device *dev)
 			goto out;
 	}
 
-	if (dev->flags & IFF_ALLMULTI) {
-		err = dev_set_allmulti(real_dev, 1);
-		if (err < 0)
-			goto del_unicast;
-	}
-	if (dev->flags & IFF_PROMISC) {
-		err = dev_set_promiscuity(real_dev, 1);
-		if (err < 0)
-			goto clear_allmulti;
-	}
-
 	ether_addr_copy(vlan->real_dev_addr, real_dev->dev_addr);
 
 	if (vlan->flags & VLAN_FLAG_GVRP)
@@ -296,12 +285,6 @@ static int vlan_dev_open(struct net_device *dev)
 		netif_carrier_on(dev);
 	return 0;
 
-clear_allmulti:
-	if (dev->flags & IFF_ALLMULTI)
-		dev_set_allmulti(real_dev, -1);
-del_unicast:
-	if (!ether_addr_equal(dev->dev_addr, real_dev->dev_addr))
-		dev_uc_del(real_dev, dev->dev_addr);
 out:
 	netif_carrier_off(dev);
 	return err;
@@ -314,10 +297,6 @@ static int vlan_dev_stop(struct net_device *dev)
 
 	dev_mc_unsync(real_dev, dev);
 	dev_uc_unsync(real_dev, dev);
-	if (dev->flags & IFF_ALLMULTI)
-		dev_set_allmulti(real_dev, -1);
-	if (dev->flags & IFF_PROMISC)
-		dev_set_promiscuity(real_dev, -1);
 
 	if (!ether_addr_equal(dev->dev_addr, real_dev->dev_addr))
 		dev_uc_del(real_dev, dev->dev_addr);
@@ -474,12 +453,10 @@ static void vlan_dev_change_rx_flags(struct net_device *dev, int change)
 {
 	struct net_device *real_dev = vlan_dev_priv(dev)->real_dev;
 
-	if (dev->flags & IFF_UP) {
-		if (change & IFF_ALLMULTI)
-			dev_set_allmulti(real_dev, dev->flags & IFF_ALLMULTI ? 1 : -1);
-		if (change & IFF_PROMISC)
-			dev_set_promiscuity(real_dev, dev->flags & IFF_PROMISC ? 1 : -1);
-	}
+	if (change & IFF_ALLMULTI)
+		dev_set_allmulti(real_dev, dev->flags & IFF_ALLMULTI ? 1 : -1);
+	if (change & IFF_PROMISC)
+		dev_set_promiscuity(real_dev, dev->flags & IFF_PROMISC ? 1 : -1);
 }
 
 static void vlan_dev_set_rx_mode(struct net_device *vlan_dev)
Signature · 2 lines
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
author maintainer
#14 lore raw

PATCH 14/15 tracing: fix return value in __ftrace_event_enable_disable for TRACE_REG_UNREGISTER

In reply to Sasha Levin

From: Gabriele Paoloni <[email protected]>

[ Upstream commit 0c588ac0ca6c22b774d9ad4a6594681fdfa57d9d ]

When __ftrace_event_enable_disable invokes the class callback to unregister the event, the return value is not reported up to the caller, hence leading to event unregister failures being silently ignored.

This patch assigns the ret variable to the invocation of the event unregister callback, so that its return value is stored and reported to the caller, and it raises a warning in case of error.

---
 kernel/trace/trace_events.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
kernel/trace/trace_events.c +3 -1
index 4b5a8d7275be7..92693e2140a94 100644
@@ -411,7 +411,9 @@ static int __ftrace_event_enable_disable(struct trace_event_file *file,
 				clear_bit(EVENT_FILE_FL_RECORDED_TGID_BIT, &file->flags);
 			}
 
-			call->class->reg(call, TRACE_REG_UNREGISTER, file);
+			ret = call->class->reg(call, TRACE_REG_UNREGISTER, file);
+
+			WARN_ON_ONCE(ret);
 		}
 		/* If in SOFT_MODE, just set the SOFT_DISABLE_BIT, else clear it */
 		if (file->flags & EVENT_FILE_FL_SOFT_MODE)
Signature · 1 line
2.39.5
author maintainer
#15 lore raw

PATCH 15/15 Bluetooth: hci_uart: fix race during initialization

In reply to Sasha Levin

From: Arseniy Krasnov <[email protected]>

[ Upstream commit 366ceff495f902182d42b6f41525c2474caf3f9a ]

'hci_register_dev()' calls power up function, which is executed by kworker - 'hci_power_on()'. This function does access to bluetooth chip using callbacks from 'hci_ldisc.c', for example 'hci_uart_send_frame()'. Now 'hci_uart_send_frame()' checks 'HCI_UART_PROTO_READY' bit set, and if not - it fails. Problem is that 'HCI_UART_PROTO_READY' is set after 'hci_register_dev()', and there is tiny chance that 'hci_power_on()' will be executed before setting this bit. In that case HCI init logic fails.

Patch moves setting of 'HCI_UART_PROTO_READY' before calling function 'hci_uart_register_dev()'.

---
 drivers/bluetooth/hci_ldisc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/bluetooth/hci_ldisc.c +2 -1
index e7d78937f7d6b..8ca0ac3a440c9 100644
@@ -706,12 +706,13 @@ static int hci_uart_set_proto(struct hci_uart *hu, int id)
 
 	hu->proto = p;
 
+	set_bit(HCI_UART_PROTO_READY, &hu->flags);
+
 	err = hci_uart_register_dev(hu);
 	if (err) {
 		return err;
 	}
 
-	set_bit(HCI_UART_PROTO_READY, &hu->flags);
 	return 0;
 }
 
Signature · 1 line
2.39.5
#16 lore raw

Re: [PATCH AUTOSEL 5.10 15/15] Bluetooth: hci_uart: fix race during initialization

Hi!

Quoted 12 lines

From: Arseniy Krasnov <[email protected]>

[ Upstream commit 366ceff495f902182d42b6f41525c2474caf3f9a ]

'hci_register_dev()' calls power up function, which is executed by kworker - 'hci_power_on()'. This function does access to bluetooth chip using callbacks from 'hci_ldisc.c', for example 'hci_uart_send_frame()'. Now 'hci_uart_send_frame()' checks 'HCI_UART_PROTO_READY' bit set, and if not - it fails. Problem is that 'HCI_UART_PROTO_READY' is set after 'hci_register_dev()', and there is tiny chance that 'hci_power_on()' will be executed before setting this bit. In that case HCI init logic fails.

Quoted 2 lines

Patch moves setting of 'HCI_UART_PROTO_READY' before calling function 'hci_uart_register_dev()'.

Ok, but do we need to adjust the error handling?

Quoted 5 lines

+++ b/drivers/bluetooth/hci_ldisc.c

drivers/bluetooth/hci_ldisc.c +0 -0
@@ -706,12 +706,13 @@ static int hci_uart_set_proto(struct hci_uart *hu, int id)
 
 	hu->proto = p;
 

drivers/bluetooth/hci_ldisc.c static int hci_uart_set_proto(struct hci_uart *hu, int id) · line 717

Quoted 10 lines
drivers/bluetooth/hci_ldisc.c +2 -1
+	set_bit(HCI_UART_PROTO_READY, &hu->flags);
+
 	err = hci_uart_register_dev(hu);
 	if (err) {
 		return err;
 	}
 
-	set_bit(HCI_UART_PROTO_READY, &hu->flags);
 	return 0;
 }

Should we clear the bit in the error path to undo the effects?

Best regards,
Pavel

Signature · 2 lines
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany