Skip to contentSkip to conversation

arm64: dts: mediatek: mt8188: Fix IOMMU device for rdma0

PATCH Applied Chen-Yu Tsai 3 participants 4 messages Apr 8, 2025 – Apr 14, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: mediatek: mt8188: Fix IOMMU device for rdma0

Based on the comments in the MT8188 IOMMU binding header, the rdma0 device specifies the wrong IOMMU device for the IOMMU port it is tied to:

    This SoC have two MM IOMMU HWs, this is the connected information:
    iommu-vdo: larb0/2/5/9/10/11A/11C/13/16B/17B/19/21
    iommu-vpp: larb1/3/4/6/7/11B/12/14/15/16A/17A/23/27

rdma0's endpoint is M4U_PORT_L1_DISP_RDMA0 (on larb1), which should use iommu-vpp, but it is currently tied to iommu-vdo.

Somehow this went undetected until recently in Linux v6.15-rc1 with some IOMMU subsystem framework changes that caused the IOMMU to no longer work. The IOMMU would fail to probe if any devices associated with it could not be successfully attached. Prior to these changes, only the end device would be left without an IOMMU attached.

Fixes 7075b21d1a8e ("arm64: dts: mediatek: mt8188: Add display nodes for vdosys0")
---
 arch/arm64/boot/dts/mediatek/mt8188.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/mediatek/mt8188.dtsi +1 -1
index 69a8423d3858..29d35ca94597 100644
@@ -2579,7 +2579,7 @@ rdma0: rdma@1c002000 {
 			reg = <0 0x1c002000 0 0x1000>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_RDMA0>;
 			interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
-			iommus = <&vdo_iommu M4U_PORT_L1_DISP_RDMA0>;
+			iommus = <&vpp_iommu M4U_PORT_L1_DISP_RDMA0>;
 			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x2000 0x1000>;
 
Signature · 1 line
2.49.0.504.g3bcea36a83-goog
maintainer Reviewed-by on v1 1/1
#1 lore raw

Il 08/04/25 11:23, Chen-Yu Tsai ha scritto:

Quoted 11 lines

Based on the comments in the MT8188 IOMMU binding header, the rdma0 device specifies the wrong IOMMU device for the IOMMU port it is tied to:

     This SoC have two MM IOMMU HWs, this is the connected information:
     iommu-vdo: larb0/2/5/9/10/11A/11C/13/16B/17B/19/21
     iommu-vpp: larb1/3/4/6/7/11B/12/14/15/16A/17A/23/27

rdma0's endpoint is M4U_PORT_L1_DISP_RDMA0 (on larb1), which should use iommu-vpp, but it is currently tied to iommu-vdo.

Quoted 8 lines

Somehow this went undetected until recently in Linux v6.15-rc1 with some IOMMU subsystem framework changes that caused the IOMMU to no longer work. The IOMMU would fail to probe if any devices associated with it could not be successfully attached. Prior to these changes, only the end device would be left without an IOMMU attached.

Fixes 7075b21d1a8e ("arm64: dts: mediatek: mt8188: Add display nodes for vdosys0")
Reviewed-by on v1 1/1
#2 lore raw
In reply to Chen-Yu Tsai

Hi Chen-Yu,

Quoted 25 lines · Chen-Yu Tsai

External email : Please do not click links or open attachments until you have verified the sender or the content.

Based on the comments in the MT8188 IOMMU binding header, the rdma0 device specifies the wrong IOMMU device for the IOMMU port it is tied to:

    This SoC have two MM IOMMU HWs, this is the connected information:
    iommu-vdo: larb0/2/5/9/10/11A/11C/13/16B/17B/19/21
    iommu-vpp: larb1/3/4/6/7/11B/12/14/15/16A/17A/23/27

rdma0's endpoint is M4U_PORT_L1_DISP_RDMA0 (on larb1), which should use
iommu-vpp, but it is currently tied to iommu-vdo.

Somehow this went undetected until recently in Linux v6.15-rc1 with some
IOMMU subsystem framework changes that caused the IOMMU to no longer work. The IOMMU would fail to probe if any devices associated with it could not be successfully attached. Prior to these changes, only the end device would be left without an IOMMU attached.

Quoted 3 lines
Fixes 7075b21d1a8e ("arm64: dts: mediatek: mt8188: Add display nodes

for vdosys0")

Thanks for your fix patch.

Regards,
Jason-JH Lin

maintainer Applied
#3 lore raw
In reply to Chen-Yu Tsai
Quoted 9 lines · Chen-Yu Tsai

Based on the comments in the MT8188 IOMMU binding header, the rdma0 device specifies the wrong IOMMU device for the IOMMU port it is tied to:

    This SoC have two MM IOMMU HWs, this is the connected information:
    iommu-vdo: larb0/2/5/9/10/11A/11C/13/16B/17B/19/21
    iommu-vpp: larb1/3/4/6/7/11B/12/14/15/16A/17A/23/27

[...]

Applied to v6.15-next/dts64, thanks!

[1/1] arm64: dts: mediatek: mt8188: Fix IOMMU device for rdma0

      commit: 267623000d11f6d483214be2484555f600393a12

Cheers,
Angelo