Skip to contentSkip to conversation

Support for PRUETH mode on AM335x ICE

PATCH In review Parvathi Pudi 2 participants 3 messages Apr 10, 2025 – Apr 16, 2025

lore
Share & tools
lore
#0 lore raw

cover Support for PRUETH mode on AM335x ICE

Hi,

This patch adds support for PRU-ICSS mode in the u-boot environment to correctly load the device tree blob file based on the HW pin (jumper) configuration in AM335x ICE Evaluation module. In this device, the pins and the ports are shared between PRU-ICSS and CPSW thus need runtime detection between the two modes which are rmii in case of CPSW and mii in case of PRU-ICSS.

Depending on the jumper configuration on AM335x ICE we have to load the appropriate device tree blob file. In case of CPSW (rmii) mode, we need to load am335x-icev2.dtb file and in case of PRU-ICSS (mii) mode we need to load am335x-icev2-prueth.dtb file.

Thanks and Regards,
Parvathi.

Parvathi Pudi (1):
include: configs: Adds support for AM335x ICE PRUSS mode

 include/configs/am335x_evm.h | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/1 include: configs: Adds support for AM335x ICE PRUSS mode

On the AM3359 ICE we have two modes of operation CPSW mode or PRU-ICSS mode.

For PRU-ICSS mode, connect Pin2 and Pin3 of J18 and J19 and for CPSW mode, connect Pin1 and Pin2 of J18 and J19.

This patch adds support for PRUSS mode boot strapping from uboot.

---
 include/configs/am335x_evm.h | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
include/configs/am335x_evm.h +4 -5
index 19d3c72a6f1..cf43fc05025 100644
@@ -138,11 +138,10 @@
 			"setenv fdtfile am335x-evm.dtb; fi; " \
 		"if test $board_name = A335X_SK; then " \
 			"setenv fdtfile am335x-evmsk.dtb; fi; " \
-		"if test $board_name = A335_ICE; then " \
-			"setenv fdtfile am335x-icev2.dtb; " \
-			"if test $ice_mii = mii; then " \
-				"setenv pxe_label_override Pruss; fi;" \
-		"fi; " \
+		"if test $board_name = A335_ICE && test $ice_mii = rmii; then " \
+			"setenv fdtfile am335x-icev2.dtb; fi; " \
+		"if test $board_name = A335_ICE && test $ice_mii = mii; then " \
+			"setenv fdtfile am335x-icev2-prueth.dtb; fi; " \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine device tree to use; fi; \0" \
 	"init_console=" \
Signature · 1 line
2.17.1
#2 lore raw

Re: [PATCH v1 1/1] include: configs: Adds support for AM335x ICE PRUSS mode

Quoted 9 lines · Parvathi Pudi

On the AM3359 ICE we have two modes of operation CPSW mode or PRU-ICSS mode.

For PRU-ICSS mode, connect Pin2 and Pin3 of J18 and J19 and for CPSW mode, connect Pin1 and Pin2 of J18 and J19.

This patch adds support for PRUSS mode boot strapping from uboot.

[...]

Applied to u-boot/master, thanks!

[1/1] include: configs: Adds support for AM335x ICE PRUSS mode

      commit: 07c3480d8b1d9ccaa5b19dab64dd02446197d7d3
Signature · 1 line
Tom