Skip to contentSkip to conversation

libbpf: Fix buffer overflow in bpf_object__init_prog

PATCH Superseded Viktor Malik 4 participants 7 messages Apr 10, 2025 – Apr 15, 2025

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 libbpf: Fix buffer overflow in bpf_object__init_prog

As reported by CVE-2025-29481 [1], it is possible to corrupt a BPF ELF file such that arbitrary BPF instructions are loaded by libbpf. This can be done by setting a symbol (BPF program) section offset to a large (unsigned) number such that <section start + symbol offset> overflows and points before the section data in the memory.

Consider the situation below where:
- prog_start = sec_start + symbol_offset <-- size_t overflow here
- prog_end = prog_start + prog_size

prog_start sec_start prog_end sec_end
| | | |
v v v v
.....................|################################|............

The CVE report in [1] also provides a corrupted BPF ELF which can be used as a reproducer:

    $ readelf -S crash
    Section Headers:
      [Nr] Name              Type             Address           Offset
           Size              EntSize          Flags  Link  Info  Align
    ...
      [ 2] uretprobe.mu[...] PROGBITS         0000000000000000  00000040
           0000000000000068  0000000000000000  AX       0     0     8
    $ readelf -s crash
    Symbol table '.symtab' contains 8 entries:
       Num:    Value          Size Type    Bind   Vis      Ndx Name
    ...
         6: ffffffffffffffb8   104 FUNC    GLOBAL DEFAULT    2 handle_tp

Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will point before the actual memory where section 2 is allocated.

This is also reported by AddressSanitizer:

    =================================================================
    ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490
    READ of size 104 at 0x7c7302fe0000 thread T0
        #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76)
        #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856
        #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928
        #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930
        #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067
        #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090
        #6 0x000000400c16 in main /poc/poc.c:8
        #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4)
        #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667)
        #9 0x000000400b34 in _start (/poc/poc+0x400b34)

    0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8)
    allocated by thread T0 here:
        #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b)
        #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600)
        #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018)
        #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740

The problem here is that currently, libbpf only checks that the program end is within the section bounds. There used to be a check while (sec_off < sec_sz) in bpf_object__add_programs, however, it was removed by commit 6245947c1b3c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions").

Put the above condition back to bpf_object__init_prog to make sure that the program start is also within the bounds of the section to avoid the potential buffer overflow.

[1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md

Fixes 6245947c1b3c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")
---
 tools/lib/bpf/libbpf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/lib/bpf/libbpf.c +1 -1
index 6b85060f07b3..d0ece3c9618e 100644
@@ -896,7 +896,7 @@ bpf_object__add_programs(struct bpf_object *obj, Elf_Data *sec_data,
 			return -LIBBPF_ERRNO__FORMAT;
 		}
 
-		if (sec_off + prog_sz > sec_sz) {
+		if (sec_off >= sec_sz || sec_off + prog_sz > sec_sz) {
 			pr_warn("sec '%s': program at offset %zu crosses section boundary\n",
 				sec_name, sec_off);
 			return -LIBBPF_ERRNO__FORMAT;
Signature · 1 line
2.49.0
#1 lore raw
Quoted 65 lines · Viktor Malik

As reported by CVE-2025-29481 [1], it is possible to corrupt a BPF ELF file such that arbitrary BPF instructions are loaded by libbpf. This can be done by setting a symbol (BPF program) section offset to a large (unsigned) number such that <section start + symbol offset> overflows and points before the section data in the memory.

Consider the situation below where:
- prog_start = sec_start + symbol_offset <-- size_t overflow here
- prog_end = prog_start + prog_size

prog_start sec_start prog_end sec_end
| | | |
v v v v
.....................|################################|............

The CVE report in [1] also provides a corrupted BPF ELF which can be used as a reproducer:

    $ readelf -S crash
    Section Headers:
      [Nr] Name              Type             Address           Offset
           Size              EntSize          Flags  Link  Info  Align
    ...
      [ 2] uretprobe.mu[...] PROGBITS         0000000000000000  00000040
           0000000000000068  0000000000000000  AX       0     0     8
    $ readelf -s crash
    Symbol table '.symtab' contains 8 entries:
       Num:    Value          Size Type    Bind   Vis      Ndx Name
    ...
         6: ffffffffffffffb8   104 FUNC    GLOBAL DEFAULT    2 handle_tp

Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will point before the actual memory where section 2 is allocated.

This is also reported by AddressSanitizer:

    =================================================================
    ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490
    READ of size 104 at 0x7c7302fe0000 thread T0
        #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76)
        #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856
        #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928
        #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930
        #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067
        #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090
        #6 0x000000400c16 in main /poc/poc.c:8
        #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4)
        #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667)
        #9 0x000000400b34 in _start (/poc/poc+0x400b34)

    0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8)
    allocated by thread T0 here:
        #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b)
        #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600)
        #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018)
        #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740

The problem here is that currently, libbpf only checks that the program end is within the section bounds. There used to be a check while (sec_off < sec_sz) in bpf_object__add_programs, however, it was removed by commit 6245947c1b3c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions").

Quoted 8 lines

Put the above condition back to bpf_object__init_prog to make sure that the program start is also within the bounds of the section to avoid the potential buffer overflow.

[1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md

Libbpf is packaged and consumed from Github mirror, which is produced from latest bpf-next and bpf trees, so there is no point in backporting fixes like this to stable kernel branches. Please drop the
CC: stable in the next revision.

Quoted 3 lines
Fixes 6245947c1b3c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")

libbpf is meant to load BPF programs under root. It's a highly-privileged operation, and libbpf is not meant, designed, and actually explicitly discouraged from loading untrusted ELF files. As such, this is just a normal bug fix, like lots of others. So let's drop the CVE link as well.

Again, no one in their sane mind should be passing untrusted ELF files into libbpf while running under root. Period.

All production use cases load ELF that they generated and control (usually embedded into their memory through BPF skeleton header). And if that ELF file is corrupted, you have problems somewhere else, libbpf is not a culprit.

Quoted 11 lines
---
 tools/lib/bpf/libbpf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/lib/bpf/libbpf.c +0 -0
index 6b85060f07b3..d0ece3c9618e 100644

tools/lib/bpf/libbpf.c bpf_object__add_programs(struct bpf_object *obj, Elf_Data *sec_data, · line 899

Quoted 5 lines
tools/lib/bpf/libbpf.c +1 -1
@@ -896,7 +896,7 @@ bpf_object__add_programs(struct bpf_object *obj, Elf_Data *sec_data,
                        return -LIBBPF_ERRNO__FORMAT;
                }
 
-               if (sec_off + prog_sz > sec_sz) {
+               if (sec_off >= sec_sz || sec_off + prog_sz > sec_sz) {

So the thing we are protecting against is that sec_off + prog_sz can overflow and turn out to be < sec_sz (even though the sum is actually bigger), right?

If my understanding is correct, then I'd find it much more obviously expressed as:

if (sec_off + prog_sz > sec_sz || sec_off + prog_sz < sec_off)

We have such an overflow detection checking pattern used in a few places already, I believe. WDYT?

pw-bot: cr

Quoted 6 lines
tools/lib/bpf/libbpf.c +0 -1
                        pr_warn("sec '%s': program at offset %zu crosses section boundary\n",
                                sec_name, sec_off);
                        return -LIBBPF_ERRNO__FORMAT;
--

2.49.0

maintainer
#2 lore raw
Quoted 90 lines · Andrii Nakryiko
Quoted 65 lines · Viktor Malik

As reported by CVE-2025-29481 [1], it is possible to corrupt a BPF ELF file such that arbitrary BPF instructions are loaded by libbpf. This can be done by setting a symbol (BPF program) section offset to a large (unsigned) number such that <section start + symbol offset> overflows and points before the section data in the memory.

Consider the situation below where:
- prog_start = sec_start + symbol_offset <-- size_t overflow here
- prog_end = prog_start + prog_size

prog_start sec_start prog_end sec_end
| | | |
v v v v
.....................|################################|............

The CVE report in [1] also provides a corrupted BPF ELF which can be used as a reproducer:

    $ readelf -S crash
    Section Headers:
      [Nr] Name              Type             Address           Offset
           Size              EntSize          Flags  Link  Info  Align
    ...
      [ 2] uretprobe.mu[...] PROGBITS         0000000000000000  00000040
           0000000000000068  0000000000000000  AX       0     0     8
    $ readelf -s crash
    Symbol table '.symtab' contains 8 entries:
       Num:    Value          Size Type    Bind   Vis      Ndx Name
    ...
         6: ffffffffffffffb8   104 FUNC    GLOBAL DEFAULT    2 handle_tp

Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will point before the actual memory where section 2 is allocated.

This is also reported by AddressSanitizer:

    =================================================================
    ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490
    READ of size 104 at 0x7c7302fe0000 thread T0
        #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76)
        #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856
        #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928
        #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930
        #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067
        #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090
        #6 0x000000400c16 in main /poc/poc.c:8
        #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4)
        #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667)
        #9 0x000000400b34 in _start (/poc/poc+0x400b34)

    0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8)
    allocated by thread T0 here:
        #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b)
        #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600)
        #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018)
        #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740

The problem here is that currently, libbpf only checks that the program end is within the section bounds. There used to be a check while (sec_off < sec_sz) in bpf_object__add_programs, however, it was removed by commit 6245947c1b3c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions").

Quoted 8 lines

Put the above condition back to bpf_object__init_prog to make sure that the program start is also within the bounds of the section to avoid the potential buffer overflow.

[1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md

Libbpf is packaged and consumed from Github mirror, which is produced from latest bpf-next and bpf trees, so there is no point in backporting fixes like this to stable kernel branches. Please drop the
CC: stable in the next revision.

Quoted 3 lines
Fixes 6245947c1b3c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")

libbpf is meant to load BPF programs under root. It's a highly-privileged operation, and libbpf is not meant, designed, and actually explicitly discouraged from loading untrusted ELF files. As such, this is just a normal bug fix, like lots of others. So let's drop the CVE link as well.

Quoted 7 lines

Again, no one in their sane mind should be passing untrusted ELF files into libbpf while running under root. Period.

All production use cases load ELF that they generated and control (usually embedded into their memory through BPF skeleton header). And if that ELF file is corrupted, you have problems somewhere else, libbpf is not a culprit.

Should that context-less CVE be revoked as well? Who asked for it to be issued?

thanks,

greg k-h

#3 lore raw
Quoted 94 lines · Greg KH
Quoted 93 lines · Andrii Nakryiko
Quoted 65 lines · Viktor Malik

As reported by CVE-2025-29481 [1], it is possible to corrupt a BPF ELF file such that arbitrary BPF instructions are loaded by libbpf. This can be done by setting a symbol (BPF program) section offset to a large (unsigned) number such that <section start + symbol offset> overflows and points before the section data in the memory.

Consider the situation below where:
- prog_start = sec_start + symbol_offset <-- size_t overflow here
- prog_end = prog_start + prog_size

prog_start sec_start prog_end sec_end
| | | |
v v v v
.....................|################################|............

The CVE report in [1] also provides a corrupted BPF ELF which can be used as a reproducer:

    $ readelf -S crash
    Section Headers:
      [Nr] Name              Type             Address           Offset
           Size              EntSize          Flags  Link  Info  Align
    ...
      [ 2] uretprobe.mu[...] PROGBITS         0000000000000000  00000040
           0000000000000068  0000000000000000  AX       0     0     8
    $ readelf -s crash
    Symbol table '.symtab' contains 8 entries:
       Num:    Value          Size Type    Bind   Vis      Ndx Name
    ...
         6: ffffffffffffffb8   104 FUNC    GLOBAL DEFAULT    2 handle_tp

Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will point before the actual memory where section 2 is allocated.

This is also reported by AddressSanitizer:

    =================================================================
    ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490
    READ of size 104 at 0x7c7302fe0000 thread T0
        #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76)
        #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856
        #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928
        #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930
        #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067
        #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090
        #6 0x000000400c16 in main /poc/poc.c:8
        #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4)
        #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667)
        #9 0x000000400b34 in _start (/poc/poc+0x400b34)

    0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8)
    allocated by thread T0 here:
        #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b)
        #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600)
        #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018)
        #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740

The problem here is that currently, libbpf only checks that the program end is within the section bounds. There used to be a check while (sec_off < sec_sz) in bpf_object__add_programs, however, it was removed by commit 6245947c1b3c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions").

Quoted 8 lines

Put the above condition back to bpf_object__init_prog to make sure that the program start is also within the bounds of the section to avoid the potential buffer overflow.

[1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md

Libbpf is packaged and consumed from Github mirror, which is produced from latest bpf-next and bpf trees, so there is no point in backporting fixes like this to stable kernel branches. Please drop the
CC: stable in the next revision.

Quoted 3 lines
Fixes 6245947c1b3c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")

libbpf is meant to load BPF programs under root. It's a highly-privileged operation, and libbpf is not meant, designed, and actually explicitly discouraged from loading untrusted ELF files. As such, this is just a normal bug fix, like lots of others. So let's drop the CVE link as well.

Again, no one in their sane mind should be passing untrusted ELF files into libbpf while running under root. Period.

Quoted 7 lines
Quoted 4 lines

All production use cases load ELF that they generated and control (usually embedded into their memory through BPF skeleton header). And if that ELF file is corrupted, you have problems somewhere else, libbpf is not a culprit.

Should that context-less CVE be revoked as well? Who asked for it to be issued?

That would be ideal. It was filed by MITRE but the CVE report doesn't contain more information than a link to the GitHub repo with the reproducer [1]. Since the repo contains reproducers for other newly filed CVEs, it's likely that they have been requested by the repo owner.

MITRE has a form [2] which apparently could be used for providing more information on a CVE. Should we try to use it and request revoking it? (I'm asking as I'm not much familiar with the overall CVE filing process).

Thanks!
Viktor

[1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md
[2] https://cveform.mitre.org/

Quoted 5 lines

thanks,

greg k-h

#4 lore raw
In reply to Andrii Nakryiko
Quoted 72 lines · Andrii Nakryiko
Quoted 71 lines · Viktor Malik

As reported by CVE-2025-29481 [1], it is possible to corrupt a BPF ELF file such that arbitrary BPF instructions are loaded by libbpf. This can be done by setting a symbol (BPF program) section offset to a large (unsigned) number such that <section start + symbol offset> overflows and points before the section data in the memory.

Consider the situation below where:
- prog_start = sec_start + symbol_offset <-- size_t overflow here
- prog_end = prog_start + prog_size

prog_start sec_start prog_end sec_end
| | | |
v v v v
.....................|################################|............

The CVE report in [1] also provides a corrupted BPF ELF which can be used as a reproducer:

    $ readelf -S crash
    Section Headers:
      [Nr] Name              Type             Address           Offset
           Size              EntSize          Flags  Link  Info  Align
    ...
      [ 2] uretprobe.mu[...] PROGBITS         0000000000000000  00000040
           0000000000000068  0000000000000000  AX       0     0     8
    $ readelf -s crash
    Symbol table '.symtab' contains 8 entries:
       Num:    Value          Size Type    Bind   Vis      Ndx Name
    ...
         6: ffffffffffffffb8   104 FUNC    GLOBAL DEFAULT    2 handle_tp

Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will point before the actual memory where section 2 is allocated.

This is also reported by AddressSanitizer:

    =================================================================
    ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490
    READ of size 104 at 0x7c7302fe0000 thread T0
        #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76)
        #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856
        #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928
        #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930
        #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067
        #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090
        #6 0x000000400c16 in main /poc/poc.c:8
        #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4)
        #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667)
        #9 0x000000400b34 in _start (/poc/poc+0x400b34)

    0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8)
    allocated by thread T0 here:
        #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b)
        #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600)
        #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018)
        #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740

The problem here is that currently, libbpf only checks that the program end is within the section bounds. There used to be a check while (sec_off < sec_sz) in bpf_object__add_programs, however, it was removed by commit 6245947c1b3c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions").

Put the above condition back to bpf_object__init_prog to make sure that the program start is also within the bounds of the section to avoid the potential buffer overflow.

[1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md

Quoted 7 lines
Quoted 2 lines

Libbpf is packaged and consumed from Github mirror, which is produced from latest bpf-next and bpf trees, so there is no point in backporting fixes like this to stable kernel branches. Please drop the
CC: stable in the next revision.

Ack, will drop it.

Quoted 11 lines
Quoted 4 lines
Fixes 6245947c1b3c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")

libbpf is meant to load BPF programs under root. It's a highly-privileged operation, and libbpf is not meant, designed, and actually explicitly discouraged from loading untrusted ELF files. As such, this is just a normal bug fix, like lots of others. So let's drop the CVE link as well.

Quoted 7 lines

Again, no one in their sane mind should be passing untrusted ELF files into libbpf while running under root. Period.

All production use cases load ELF that they generated and control (usually embedded into their memory through BPF skeleton header). And if that ELF file is corrupted, you have problems somewhere else, libbpf is not a culprit.

While I couldn't agree more, I'm a bit on the fence here. On one hand, unless the CVE is revoked (see the other thread), people may still run across it and, without sufficient knowledge of libbpf, think that they are vulnerable. Having a CVE reference in the patch could help them recognize that they are using a patched version of libbpf or at least read an explanation why the vulnerability is not real.

On the other hand, since it's just a bug, I agree that it doesn't make much sense to reference a CVE from it. So, I'm ok both ways. I can reference the CVE and provide some better explanation why this should not be considered a vulnerability.

Quoted 21 lines
Quoted 11 lines
---
 tools/lib/bpf/libbpf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/lib/bpf/libbpf.c +0 -0
index 6b85060f07b3..d0ece3c9618e 100644

tools/lib/bpf/libbpf.c bpf_object__add_programs(struct bpf_object *obj, Elf_Data *sec_data, · line 899

Quoted 5 lines
tools/lib/bpf/libbpf.c +1 -1
@@ -896,7 +896,7 @@ bpf_object__add_programs(struct bpf_object *obj, Elf_Data *sec_data,
                        return -LIBBPF_ERRNO__FORMAT;
                }
 
-               if (sec_off + prog_sz > sec_sz) {
+               if (sec_off >= sec_sz || sec_off + prog_sz > sec_sz) {

So the thing we are protecting against is that sec_off + prog_sz can overflow and turn out to be < sec_sz (even though the sum is actually bigger), right?

Quoted 8 lines

If my understanding is correct, then I'd find it much more obviously expressed as:

if (sec_off + prog_sz > sec_sz || sec_off + prog_sz < sec_off)

We have such an overflow detection checking pattern used in a few places already, I believe. WDYT?

Sure, since we're dealing with unsigned numbers, the above is an equivalent condition. And you're right that it better expresses the intent so let me use it.

Thanks!
Viktor

Quoted 10 lines

pw-bot: cr

Quoted 6 lines
tools/lib/bpf/libbpf.c +0 -1
                        pr_warn("sec '%s': program at offset %zu crosses section boundary\n",
                                sec_name, sec_off);
                        return -LIBBPF_ERRNO__FORMAT;
--

2.49.0

#5 lore raw
Quoted 7 lines · Viktor Malik
Quoted 6 lines · Andrii Nakryiko
Quoted 5 lines · Viktor Malik

As reported by CVE-2025-29481 [1], it is possible to corrupt a BPF ELF file such that arbitrary BPF instructions are loaded by libbpf. This can be done by setting a symbol (BPF program) section offset to a large (unsigned) number such that <section start + symbol offset> overflows and points before the section data in the memory.

...

Quoted 8 lines
Quoted 6 lines
Quoted 1 line

Libbpf is packaged and consumed from Github mirror, which is produced from latest bpf-next and bpf trees, so there is no point in backporting fixes like this to stable kernel branches. Please drop the
CC: stable in the next revision.

Ack, will drop it.

Sorry for blindly suggesting the CC. I'll keep that in mind.

Quoted 25 lines
Quoted 10 lines
Quoted 3 lines
Fixes 6245947c1b3c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")

libbpf is meant to load BPF programs under root. It's a highly-privileged operation, and libbpf is not meant, designed, and actually explicitly discouraged from loading untrusted ELF files. As such, this is just a normal bug fix, like lots of others. So let's drop the CVE link as well.

Quoted 7 lines

Again, no one in their sane mind should be passing untrusted ELF files into libbpf while running under root. Period.

All production use cases load ELF that they generated and control (usually embedded into their memory through BPF skeleton header). And if that ELF file is corrupted, you have problems somewhere else, libbpf is not a culprit.

While I couldn't agree more, I'm a bit on the fence here. On one hand, unless the CVE is revoked (see the other thread), people may still run across it and, without sufficient knowledge of libbpf, think that they are vulnerable. Having a CVE reference in the patch could help them recognize that they are using a patched version of libbpf or at least read an explanation why the vulnerability is not real.

Quoted 4 lines

On the other hand, since it's just a bug, I agree that it doesn't make much sense to reference a CVE from it. So, I'm ok both ways. I can reference the CVE and provide some better explanation why this should not be considered a vulnerability.

While I also see other colleagues that reference CVE number in the commit message in other subsystems, personally I would drop CVE reference here. This CVE entry doesn't have techinical detail in itself beside mentioning that the issue being buffer overflow, and is disputed/on the way to being rejected as far as this thread is concerned.

...

#6 lore raw
Quoted 50 lines · Shung-Hsi Yu
Quoted 7 lines · Viktor Malik
Quoted 6 lines · Andrii Nakryiko
Quoted 5 lines · Viktor Malik

As reported by CVE-2025-29481 [1], it is possible to corrupt a BPF ELF file such that arbitrary BPF instructions are loaded by libbpf. This can be done by setting a symbol (BPF program) section offset to a large (unsigned) number such that <section start + symbol offset> overflows and points before the section data in the memory.

...

Quoted 8 lines
Quoted 6 lines
Quoted 1 line

Libbpf is packaged and consumed from Github mirror, which is produced from latest bpf-next and bpf trees, so there is no point in backporting fixes like this to stable kernel branches. Please drop the
CC: stable in the next revision.

Ack, will drop it.

Sorry for blindly suggesting the CC. I'll keep that in mind.

Quoted 25 lines
Quoted 10 lines
Quoted 3 lines
Fixes 6245947c1b3c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")

libbpf is meant to load BPF programs under root. It's a highly-privileged operation, and libbpf is not meant, designed, and actually explicitly discouraged from loading untrusted ELF files. As such, this is just a normal bug fix, like lots of others. So let's drop the CVE link as well.

Quoted 7 lines

Again, no one in their sane mind should be passing untrusted ELF files into libbpf while running under root. Period.

All production use cases load ELF that they generated and control (usually embedded into their memory through BPF skeleton header). And if that ELF file is corrupted, you have problems somewhere else, libbpf is not a culprit.

While I couldn't agree more, I'm a bit on the fence here. On one hand, unless the CVE is revoked (see the other thread), people may still run across it and, without sufficient knowledge of libbpf, think that they are vulnerable. Having a CVE reference in the patch could help them recognize that they are using a patched version of libbpf or at least read an explanation why the vulnerability is not real.

Quoted 4 lines

On the other hand, since it's just a bug, I agree that it doesn't make much sense to reference a CVE from it. So, I'm ok both ways. I can reference the CVE and provide some better explanation why this should not be considered a vulnerability.

Quoted 6 lines

While I also see other colleagues that reference CVE number in the commit message in other subsystems, personally I would drop CVE reference here. This CVE entry doesn't have techinical detail in itself beside mentioning that the issue being buffer overflow, and is disputed/on the way to being rejected as far as this thread is concerned.

Good point, I agree that dropping the reference is probably the best approach here. It will allow us to merge this fix while we discuss the next steps wrt. the CVE in the other thread.

I'll send a new version.

Thanks.
Viktor

Quoted 3 lines

...