Skip to contentSkip to conversation

arm: dts: am62a: allow booting from eMMC

PATCH In review Anshul Dalal 2 participants 2 messages Apr 15, 2025 – Apr 24, 2025 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm: dts: am62a: allow booting from eMMC

The bootph-all property in u-boot enables driver initialization prior to relocation, this is necessary to use the device as boot media.

sdhci0 is the phandle for eMMC on am62a, so this change allows us to use eMMC as a boot media.

---
 arch/arm/dts/k3-am62a7-sk-u-boot.dtsi | 4 ++++
 1 file changed, 4 insertions(+)
arch/arm/dts/k3-am62a7-sk-u-boot.dtsi +4 -0
index 7dfbeb10c32..a70fc88317e 100644
@@ -100,6 +100,10 @@
 	bootph-all;
 };
 
+&sdhci0 {
+	bootph-all;
+};
+
 &sdhci1 {
 	bootph-all;
 };
Signature · 1 line
2.49.0
#1 lore raw
Quoted 8 lines · Anshul Dalal

The bootph-all property in u-boot enables driver initialization prior to relocation, this is necessary to use the device as boot media.

sdhci0 is the phandle for eMMC on am62a, so this change allows us to use eMMC as a boot media.

[...]

Applied to u-boot/master, thanks!

[1/1] arm: dts: am62a: allow booting from eMMC

      commit: 243a6dbfb680f9773e3c2a1e2e17e69068830666
Signature · 1 line
Tom