staging: sm250fb: remove USE_HW_I2C check
A message that is not in the archive (sent off-list or not yet received): [email protected]
cover staging: sm750fb: cleanup ddk750_sii164
This patch series fixes errors shown by checkpatch.pl in ddk750_sii164.c and .h
The changes are mostly camelCase to snake_case changes, however include a variable rename to a clearer name and removal of the USE_HW_I2C check.
This patch series is created from spliting an earlier patch into smaller, more logical changes.
The patches will need to be applied in order.
I have included details of the latter within the patch description itself.
It is also worth noting that I do not have the hardware in question, so I am unable to test whether any functional changes would be better served one way or another.
Thank you
Ruben
Ruben Wauters (8):
staging: sm250fb: remove USE_HW_I2C check
staging: sm750fb: rename gDviCtrlChipName
staging: sm750fb: rename vendorID to vendor_id
staging: sm750fb: rename sii164_init_chip params
staging: sm750fb: rename sii164_set_power's param
staging: sm750fb: rename sii164SelectHotPlugDetectionMode
staging: sm750fb: rename detectReg to detect_reg
staging: sm750fb: rename hotPlugValue to hot_plug_value
drivers/staging/sm750fb/ddk750_sii164.c | 119 +++++++++++------------- drivers/staging/sm750fb/ddk750_sii164.h | 22 ++--- 2 files changed, 63 insertions(+), 78 deletions(-)
Signature · 1 line
2.45.2
PATCH 1/8 staging: sm250fb: remove USE_HW_I2C check
Removes the USE_HW_I2C check and function defines in ddk750_sii164.c.
The software equivalents were never used due to USE_HW_I2C being defined just before the ifdef, meaning the hardware versions were always used.
The define names were also triggering checkpatch.pl's camel case check.
---
I am somewhat unsure whether this is the way to go or the correct way would be to add an option/opportunity for the software version to be used. Currently the hardware version is always used, but I am unsure if there ever even would be a case where you would want to use the software version over the hardware version.
I do not have the hardware in question so I cannot test what the difference between the two versions exactly is.
I also note that the removal is mentioned in the TODO, however once again this is currently hardcoded.
--- drivers/staging/sm750fb/ddk750_sii164.c | 63 ++++++++++--------------- 1 file changed, 24 insertions(+), 39 deletions(-)
drivers/staging/sm750fb/ddk750_sii164.c +24 -39
@@ -8,17 +8,6 @@/* I2C Address of each SII164 chip */ #define SII164_I2C_ADDRESS 0x70 -/* Define this definition to use hardware i2c. */ -#define USE_HW_I2C - -#ifdef USE_HW_I2C -#define i2cWriteReg sm750_hw_i2c_write_reg -#define i2cReadReg sm750_hw_i2c_read_reg -#else -#define i2cWriteReg sm750_sw_i2c_write_reg -#define i2cReadReg sm750_sw_i2c_read_reg -#endif -/* SII164 Vendor and Device ID */ #define SII164_VENDOR_ID 0x0001#define SII164_DEVICE_ID 0x0006
@@ -39,10 +28,10 @@ unsigned short sii164_get_vendor_id(void) {unsigned short vendorID; - vendorID = ((unsigned short )i2cReadReg (SII164_I2C_ADDRESS , -SII164_VENDOR_ID_HIGH ) <<8 ) | - (unsigned short )i2cReadReg (SII164_I2C_ADDRESS , -SII164_VENDOR_ID_LOW ); + vendorID = ((unsigned short )sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS , +SII164_VENDOR_ID_HIGH ) <<8 ) | + (unsigned short )sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS , +SII164_VENDOR_ID_LOW );return vendorID; }
@@ -58,10 +47,10 @@ unsigned short sii164_get_device_id(void) {unsigned short device_id; - device_id = ((unsigned short )i2cReadReg (SII164_I2C_ADDRESS , -SII164_DEVICE_ID_HIGH ) <<8 ) | - (unsigned short )i2cReadReg (SII164_I2C_ADDRESS , -SII164_DEVICE_ID_LOW ); + device_id = ((unsigned short )sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS , +SII164_DEVICE_ID_HIGH ) <<8 ) | + (unsigned short )sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS , +SII164_DEVICE_ID_LOW );return device_id; }
@@ -132,12 +121,8 @@ long sii164_init_chip(unsigned char edge_select,unsigned char config;/* Initialize the i2c bus */ -#ifdef USE_HW_I2C /* Use fast mode. */ sm750_hw_i2c_init (1 ); -#else -sm750_sw_i2c_init (DEFAULT_I2C_SCL ,DEFAULT_I2C_SDA ); -#endif /* Check if SII164 Chip exists */ if ((sii164_get_vendor_id() == SII164_VENDOR_ID) &&
@@ -176,7 +161,7 @@ long sii164_init_chip(unsigned char edge_select,else config |=SII164_CONFIGURATION_VSYNC_AS_IS ; -i2cWriteReg (SII164_I2C_ADDRESS ,SII164_CONFIGURATION , config); +sm750_hw_i2c_write_reg (SII164_I2C_ADDRESS ,SII164_CONFIGURATION , config);/* * De-skew enabled with default 111b value.
@@ -214,7 +199,7 @@ long sii164_init_chip(unsigned char edge_select, config |=SII164_DESKEW_8_STEP ;break ; } -i2cWriteReg (SII164_I2C_ADDRESS ,SII164_DESKEW , config); +sm750_hw_i2c_write_reg (SII164_I2C_ADDRESS ,SII164_DESKEW , config);/* Enable/Disable Continuous Sync. */ if (continuous_sync_enable ==0 )
@@ -231,12 +216,12 @@ long sii164_init_chip(unsigned char edge_select,/* Set the PLL Filter value */ config |= ((pll_filter_value &0x07 ) <<1 ); -i2cWriteReg (SII164_I2C_ADDRESS ,SII164_PLL , config); +sm750_hw_i2c_write_reg (SII164_I2C_ADDRESS ,SII164_PLL , config);/* Recover from Power Down and enable output. */ - config =i2cReadReg (SII164_I2C_ADDRESS ,SII164_CONFIGURATION ); + config =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_CONFIGURATION ); config |=SII164_CONFIGURATION_POWER_NORMAL ; -i2cWriteReg (SII164_I2C_ADDRESS ,SII164_CONFIGURATION , config); +sm750_hw_i2c_write_reg (SII164_I2C_ADDRESS ,SII164_CONFIGURATION , config);return 0 ; }
@@ -283,17 +268,17 @@ void sii164_set_power(unsigned char powerUp) {unsigned char config; - config =i2cReadReg (SII164_I2C_ADDRESS ,SII164_CONFIGURATION ); + config =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_CONFIGURATION );if (powerUp ==1 ) {/* Power up the chip */ config &= ~SII164_CONFIGURATION_POWER_MASK ; config |=SII164_CONFIGURATION_POWER_NORMAL ; -i2cWriteReg (SII164_I2C_ADDRESS ,SII164_CONFIGURATION , config); +sm750_hw_i2c_write_reg (SII164_I2C_ADDRESS ,SII164_CONFIGURATION , config); }else {/* Power down the chip */ config &= ~SII164_CONFIGURATION_POWER_MASK ; config |=SII164_CONFIGURATION_POWER_DOWN ; -i2cWriteReg (SII164_I2C_ADDRESS ,SII164_CONFIGURATION , config); +sm750_hw_i2c_write_reg (SII164_I2C_ADDRESS ,SII164_CONFIGURATION , config); } }
@@ -306,7 +291,7 @@ void sii164SelectHotPlugDetectionMode(enum sii164_hot_plug_mode hotPlugMode) {unsigned char detectReg; - detectReg =i2cReadReg (SII164_I2C_ADDRESS ,SII164_DETECT ) & + detectReg =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_DETECT ) & ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG ;switch (hotPlugMode) {case SII164_HOTPLUG_DISABLE :
@@ -325,7 +310,7 @@ void sii164SelectHotPlugDetectionMode(enum sii164_hot_plug_mode hotPlugMode)break ; } -i2cWriteReg (SII164_I2C_ADDRESS ,SII164_DETECT , detectReg); +sm750_hw_i2c_write_reg (SII164_I2C_ADDRESS ,SII164_DETECT , detectReg); }/*
@@ -338,7 +323,7 @@ void sii164_enable_hot_plug_detection(unsigned char enable_hot_plug) {unsigned char detectReg; - detectReg =i2cReadReg (SII164_I2C_ADDRESS ,SII164_DETECT ); + detectReg =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_DETECT );/* Depending on each DVI controller, need to enable the hot plug based * on each individual chip design.
@@ -361,7 +346,7 @@ unsigned char sii164_is_connected(void) {unsigned char hotPlugValue; - hotPlugValue =i2cReadReg (SII164_I2C_ADDRESS ,SII164_DETECT ) & + hotPlugValue =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_DETECT ) &SII164_DETECT_HOT_PLUG_STATUS_MASK ;if (hotPlugValue ==SII164_DETECT_HOT_PLUG_STATUS_ON )return 1 ;
@@ -381,7 +366,7 @@ unsigned char sii164_check_interrupt(void) {unsigned char detectReg; - detectReg =i2cReadReg (SII164_I2C_ADDRESS ,SII164_DETECT ) & + detectReg =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_DETECT ) &SII164_DETECT_MONITOR_STATE_MASK ;if (detectReg ==SII164_DETECT_MONITOR_STATE_CHANGE )return 1 ;
@@ -398,9 +383,9 @@ void sii164_clear_interrupt(void)unsigned char detectReg;/* Clear the MDI interrupt */ - detectReg =i2cReadReg (SII164_I2C_ADDRESS ,SII164_DETECT ); -i2cWriteReg (SII164_I2C_ADDRESS ,SII164_DETECT , - detectReg | SII164_DETECT_MONITOR_STATE_CLEAR); + detectReg =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_DETECT ); +sm750_hw_i2c_write_reg (SII164_I2C_ADDRESS ,SII164_DETECT , + detectReg | SII164_DETECT_MONITOR_STATE_CLEAR); }#endif
Signature · 1 line
2.45.2
Greg Kroah-Hartman
maintainerQuoted 12 lines · Ruben Wauters
Removes the
USE_HW_I2Ccheck and function defines inddk750_sii164.c.The software equivalents were never used due to
USE_HW_I2Cbeing defined just before the ifdef, meaning the hardware versions were always used.The define names were also triggering checkpatch.pl's camel case check.
Signed-off-by Ruben Wauters <[email protected]>
Quoted 8 lines
---
I am somewhat unsure whether this is the way to go or the correct way would be to add an option/opportunity for the software version to be used. Currently the hardware version is always used, but I am unsure if there ever even would be a case where you would want to use the software version over the hardware version.
Then the code can be added back, not an issue.
But you forgot this same check indrivers/staging/sm750fb/ddk750_hwi2c.c, right?
Also, what about removing the sm750_sw_i2c_write_reg() and other functions that are now never referenced? Can you add that to this patch series? A single series that just removes the use of USE_HW_I2C and the now unneeded functions would be best, as it's not really a "coding style" fix, but rather a code cleanup thing, right?
thanks,
greg k-h
Quoted 22 lines · Greg Kroah-Hartman
Quoted 12 lines · Ruben Wauters
Removes the
USE_HW_I2Ccheck and function defines inddk750_sii164.c.The software equivalents were never used due to
USE_HW_I2Cbeing defined just before the ifdef, meaning the hardware versions were always used.The define names were also triggering checkpatch.pl's camel case check.
Signed-off-by Ruben Wauters <[email protected]>Quoted 8 lines
---
I am somewhat unsure whether this is the way to go or the correct way would be to add an option/opportunity for the software version to be used. Currently the hardware version is always used, but I am unsure if there ever even would be a case where you would want to use the software version over the hardware version.
Quoted 4 lines
Then the code can be added back, not an issue.
But you forgot this same check in
drivers/staging/sm750fb/ddk750_hwi2c.c, right?
This check can indeed be removed I suppose, might be worth also removing the USE_DVICHIP checks also, especially when defined
There's also a USE_HW_I2C check in ddk750.h, which defines which header to use, however I'm somewhat unsure exactly what the best way to go about addressing that is, since it's not defined before including it does make me wonder whether the HW files are even used at all.
Something about this seems entirely wrong to me, again I don't have the hardware to test, but why would SW files be used when the HW files work fine? Is it intended that the HW files are used instead? it's a bit inconsistent, especially since in ddk750_sii164.c the HW ones are explicitly used over the SW ones
Why is the SW files preferred in sm750_hw.c then?
I believe this is something of an oversight and the files should probably use the HW ones instead of the SW ones.
I am curious to know your thoughts on this (and anyone else's)
Quoted 7 lines
Also, what about removing the
sm750_sw_i2c_write_reg()and other functions that are now never referenced? Can you add that to this patch
series? A single series that just removes the use ofUSE_HW_I2Cand the
now unneeded functions would be best, as it's not really a "coding style" fix, but rather a code cleanup thing, right?
I will create a separate patch series for removing unneeded code, since it does look like a lot more code removal might be needed than I originally thought.
Quoted 3 lines
thanks,
greg k-h
PATCH 2/8 staging: sm750fb: rename gDviCtrlChipName
In reply to Ruben WautersRenames gDviCtrlChipName to dvi_controller_chip_name This fixes checkpatch.pl's camel case check.
---
I changed the name to dvi_controller_chip_name as I believe it is somewhat more descriptive than g_dvi_ctrl_chip_name. If the second one is wanted instead please let me know and I will change it
--- drivers/staging/sm750fb/ddk750_sii164.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/staging/sm750fb/ddk750_sii164.c +2 -2
@@ -14,7 +14,7 @@#ifdef SII164_FULL_FUNCTIONS /* Name of the DVI Controller chip */ -static char *gDviCtrlChipName ="Silicon Image SiI 164" ; +static char *dvi_controller_chip_name ="Silicon Image SiI 164" ;#endif /*
@@ -254,7 +254,7 @@ void sii164_reset_chip(void)*/ char *sii164_get_chip_string (void ) { -return gDviCtrlChipName; +return dvi_controller_chip_name; }/*
Signature · 1 line
2.45.2
Greg Kroah-Hartman
maintainerRe: [PATCH 2/8] staging: sm750fb: rename gDviCtrlChipName
Quoted 20 lines · Ruben Wauters
Renames gDviCtrlChipName to
dvi_controller_chip_nameThis fixes checkpatch.pl's camel case check.Signed-off-by Ruben Wauters <[email protected]>---
I changed the name to
dvi_controller_chip_nameas I believe it is somewhat more descriptive thang_dvi_ctrl_chip_name. If the second one is wanted instead please let me know and I will change it--- drivers/staging/sm750fb/ddk750_sii164.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/staging/sm750fb/ddk750_sii164.c +0
-0
drivers/staging/sm750fb/ddk750_sii164.c line 15
Quoted 2 lines
drivers/staging/sm750fb/ddk750_sii164.c +0
-0@@ -14,7 +14,7 @@#ifdef SII164_FULL_FUNCTIONS
This is never defined, so instead of papering over variable names that are crazy, why not just remove all of the code in the blocks for this define entirely?
thanks,
greg k-h
Re: [PATCH 2/8] staging: sm750fb: rename gDviCtrlChipName
Quoted 16 lines · Greg Kroah-Hartman
Quoted 15 lines · Ruben Wauters
Renames gDviCtrlChipName to
dvi_controller_chip_nameThis fixes checkpatch.pl's camel case check.Signed-off-by Ruben Wauters <[email protected]>---
I changed the name to
dvi_controller_chip_nameas I believe it is somewhat more descriptive thang_dvi_ctrl_chip_name. If the second one is wanted instead please let me know and I will change it
---
drivers/staging/sm750fb/ddk750_sii164.c | 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)
Quoted 13 lines
Quoted 8 lines
drivers/staging/sm750fb/ddk750_sii164.c +0
-0@@ -14,7 +14,7 @@
#ifdefSII164_FULL_FUNCTIONSThis is never defined, so instead of papering over variable names that
are crazy, why not just remove all of the code in the blocks for this define entirely?
Given the amount of code that is never used and the time went into writing this, it does make me wonder whether this code *should* be used instead of being removed. I don't know exactly how it would be integrated however, removal as of now might be the easiest option, but I'm not entirely sure whether it would be the best option in terms of functionality.
Quoted 3 lines
thanks,
greg k-h
Greg Kroah-Hartman
maintainerRe: [PATCH 2/8] staging: sm750fb: rename gDviCtrlChipName
Quoted 31 lines · Ruben Wauters
Quoted 16 lines · Greg Kroah-Hartman
Quoted 15 lines · Ruben Wauters
Renames gDviCtrlChipName to
dvi_controller_chip_nameThis fixes checkpatch.pl's camel case check.Signed-off-by Ruben Wauters <[email protected]>---
I changed the name to
dvi_controller_chip_nameas I believe it is somewhat more descriptive thang_dvi_ctrl_chip_name. If the second one is wanted instead please let me know and I will change it
---
drivers/staging/sm750fb/ddk750_sii164.c | 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)Quoted 13 lines
Quoted 8 lines
drivers/staging/sm750fb/ddk750_sii164.c +0
-0@@ -14,7 +14,7 @@
#ifdefSII164_FULL_FUNCTIONSThis is never defined, so instead of papering over variable names that
are crazy, why not just remove all of the code in the blocks for this define entirely?
Quoted 6 lines
Given the amount of code that is never used and the time went into writing this, it does make me wonder whether this code *should* be used instead of being removed. I don't know exactly how it would be integrated however, removal as of now might be the easiest option, but I'm not entirely sure whether it would be the best option in terms of functionality.
Just remove it, odds are it was written a long time ago for other hardware. If someone needs it in the future, the git history has it there for their use.
thanks,
greg k-h
PATCH 3/8 staging: sm750fb: rename vendorID to vendor_id
In reply to Ruben WautersFixes camel case check reported by checkpatch.pl
--- drivers/staging/sm750fb/ddk750_sii164.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/staging/sm750fb/ddk750_sii164.c +5 -5
@@ -26,14 +26,14 @@ static char *dvi_controller_chip_name = "Silicon Image SiI 164";*/ unsigned short sii164_get_vendor_id (void ) { -unsigned short vendorID; +unsigned short vendor_id; - vendorID = ((unsigned short )sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS , + vendor_id = ((unsigned short )sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_VENDOR_ID_HIGH ) <<8 ) | - (unsigned short )sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS , -SII164_VENDOR_ID_LOW ); + (unsigned short )sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS , +SII164_VENDOR_ID_LOW ); -return vendorID; +return vendor_id; }/*
Signature · 1 line
2.45.2
Greg Kroah-Hartman
maintainerRe: [PATCH 3/8] staging: sm750fb: rename vendorID to vendor_id
Quoted 18 lines · Ruben Wauters
Fixes camel case check reported by checkpatch.pl
Signed-off-by Ruben Wauters <[email protected]>--- drivers/staging/sm750fb/ddk750_sii164.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)drivers/staging/sm750fb/ddk750_sii164.c +1
-1@@ -26,14 +26,14 @@ static char *dvi_controller_chip_name = "Silicon Image SiI 164";*/ unsigned short sii164_get_vendor_id (void ) { -unsigned short vendorID; +unsigned short vendor_id;
drivers/staging/sm750fb/ddk750_sii164.c static char *dvi_controller_chip_name = "Silicon Image SiI 164"; · line 36
Quoted 10 lines
drivers/staging/sm750fb/ddk750_sii164.c +4
-4- vendorID = ((unsigned short )sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS , + vendor_id = ((unsigned short )sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_VENDOR_ID_HIGH ) <<8 ) | - (unsigned short )sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS , -SII164_VENDOR_ID_LOW ); + (unsigned short )sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS , +SII164_VENDOR_ID_LOW ); -return vendorID; +return vendor_id;
Why is the temporary variable needed at all? Why not just return the value directly?
thanks,
greg k-h
PATCH 4/8 staging: sm750fb: rename sii164_init_chip params
In reply to Ruben WautersRenames sii164_init_chip's params in the header
file to be identical to the params in the c file.
This also fixes (one of) checkpatch.pl's camel case checks
--- drivers/staging/sm750fb/ddk750_sii164.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/staging/sm750fb/ddk750_sii164.h +10 -10
@@ -16,16 +16,16 @@ enum sii164_hot_plug_mode { };/* Silicon Image SiI164 chip prototype */ -long sii164_init_chip (unsigned char edgeSelect, -unsigned char busSelect, -unsigned char dualEdgeClkSelect, -unsigned char hsyncEnable, -unsigned char vsyncEnable, -unsigned char deskewEnable, -unsigned char deskewSetting, -unsigned char continuousSyncEnable, -unsigned char pllFilterEnable, -unsigned char pllFilterValue); +long sii164_init_chip (unsigned char edge_select, +unsigned char bus_select, +unsigned char dual_edge_clk_select, +unsigned char hsync_enable, +unsigned char vsync_enable, +unsigned char deskew_enable, +unsigned char deskew_setting, +unsigned char continuous_sync_enable, +unsigned char pll_filter_enable, +unsigned char pll_filter_value);unsigned short sii164_get_vendor_id (void );unsigned short sii164_get_device_id (void );
Signature · 1 line
2.45.2
PATCH 5/8 staging: sm750fb: rename sii164_set_power's param
In reply to Ruben WautersRenames sii164_set_power's param from powerUp to power
This fixes checkpatch.pl's camel case check
--- drivers/staging/sm750fb/ddk750_sii164.c | 6 +++--- drivers/staging/sm750fb/ddk750_sii164.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/staging/sm750fb/ddk750_sii164.c +3 -3
@@ -262,14 +262,14 @@ char *sii164_get_chip_string(void)* This function sets the power configuration of the DVI Controller Chip. * * Input: -* powerUp - Flag to set the power down or up +* power - Flag to set the power down or up */ -void sii164_set_power (unsigned char powerUp) +void sii164_set_power (unsigned char power) {unsigned char config; config =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_CONFIGURATION ); -if (powerUp ==1 ) { +if (power ==1 ) {/* Power up the chip */ config &= ~SII164_CONFIGURATION_POWER_MASK ; config |=SII164_CONFIGURATION_POWER_NORMAL ;
drivers/staging/sm750fb/ddk750_sii164.h +1 -1
@@ -33,7 +33,7 @@ unsigned short sii164_get_device_id(void);#ifdef SII164_FULL_FUNCTIONS void sii164_reset_chip (void );char *sii164_get_chip_string (void ); -void sii164_set_power (unsigned char powerUp); +void sii164_set_power (unsigned char power);void sii164_enable_hot_plug_detection (unsigned char enable_hot_plug);unsigned char sii164_is_connected (void );unsigned char sii164_check_interrupt (void );
Signature · 1 line
2.45.2
Greg Kroah-Hartman
maintainerRe: [PATCH 5/8] staging: sm750fb: rename sii164_set_power's param
Quoted 15 lines · Ruben Wauters
Renames sii164_set_power's param from powerUp to power
This fixes checkpatch.pl's camel case check
Signed-off-by Ruben Wauters <[email protected]>--- drivers/staging/sm750fb/ddk750_sii164.c | 6 +++--- drivers/staging/sm750fb/ddk750_sii164.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-)drivers/staging/sm750fb/ddk750_sii164.c +0
-0
drivers/staging/sm750fb/ddk750_sii164.c char *sii164_get_chip_string(void) · line 265
Quoted 5 lines
drivers/staging/sm750fb/ddk750_sii164.c +1
-1@@ -262,14 +262,14 @@ char *sii164_get_chip_string(void)* This function sets the power configuration of the DVI Controller Chip. * * Input: -* powerUp - Flag to set the power down or up +* power - Flag to set the power down or up
But now we don't know if it's "up" or "down", right? Why not pick "power_up"?
And shouldn't this be a boolean, and not an unsigned char?
thanks,
greg k-h
PATCH 6/8 staging: sm750fb: rename sii164SelectHotPlugDetectionMode
In reply to Ruben WautersRenames sii164SelectHotPlugDetectionMode to sii164_select_hot_plug_detection_mode, and the param hotPlugMode to hot_plug_mode.
This fixes checkpatch.pl's camel case check.
--- drivers/staging/sm750fb/ddk750_sii164.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/staging/sm750fb/ddk750_sii164.c +5 -5
@@ -283,17 +283,17 @@ void sii164_set_power(unsigned char power) }/* -* sii164SelectHotPlugDetectionMode +* sii164_select_hot_plug_detection_mode * This function selects the mode of the hot plug detection. */ static -void sii164SelectHotPlugDetectionMode (enum sii164_hot_plug_mode hotPlugMode) +void sii164_select_hot_plug_detection_mode (enum sii164_hot_plug_mode hot_plug_mode) {unsigned char detectReg; detectReg =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_DETECT ) & ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG ; -switch (hotPlugMode) { +switch (hot_plug_mode) {case SII164_HOTPLUG_DISABLE : detectReg |=SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH ;break ;
@@ -329,9 +329,9 @@ void sii164_enable_hot_plug_detection(unsigned char enable_hot_plug)* on each individual chip design. */ if (enable_hot_plug !=0 ) -sii164SelectHotPlugDetectionMode (SII164_HOTPLUG_USE_MDI ); +sii164_select_hot_plug_detection_mode (SII164_HOTPLUG_USE_MDI );else -sii164SelectHotPlugDetectionMode (SII164_HOTPLUG_DISABLE ); +sii164_select_hot_plug_detection_mode (SII164_HOTPLUG_DISABLE ); }/*
Signature · 1 line
2.45.2
PATCH 7/8 staging: sm750fb: rename detectReg to detect_reg
In reply to Ruben WautersRenames detectReg to detect_reg in a few functions
Fixes checkpatch.pl's camel case check
--- drivers/staging/sm750fb/ddk750_sii164.c | 38 ++++++++++++------------- 1 file changed, 19 insertions(+), 19 deletions(-)
drivers/staging/sm750fb/ddk750_sii164.c +19 -19
@@ -289,28 +289,28 @@ void sii164_set_power(unsigned char power)static void sii164_select_hot_plug_detection_mode (enum sii164_hot_plug_mode hot_plug_mode) { -unsigned char detectReg; +unsigned char detect_reg; - detectReg =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_DETECT ) & - ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG ; + detect_reg =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_DETECT ) & + ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG ;switch (hot_plug_mode) {case SII164_HOTPLUG_DISABLE : - detectReg |=SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH ; + detect_reg |=SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH ;break ;case SII164_HOTPLUG_USE_MDI : - detectReg &= ~SII164_DETECT_INTERRUPT_MASK ; - detectReg |=SII164_DETECT_INTERRUPT_BY_HTPLG_PIN ; - detectReg |=SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI ; + detect_reg &= ~SII164_DETECT_INTERRUPT_MASK ; + detect_reg |=SII164_DETECT_INTERRUPT_BY_HTPLG_PIN ; + detect_reg |=SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI ;break ;case SII164_HOTPLUG_USE_RSEN : - detectReg |=SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN ; + detect_reg |=SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN ;break ;case SII164_HOTPLUG_USE_HTPLG : - detectReg |=SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG ; + detect_reg |=SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG ;break ; } -sm750_hw_i2c_write_reg (SII164_I2C_ADDRESS ,SII164_DETECT , detectReg); +sm750_hw_i2c_write_reg (SII164_I2C_ADDRESS ,SII164_DETECT , detect_reg); }/*
@@ -321,9 +321,9 @@ void sii164_select_hot_plug_detection_mode(enum sii164_hot_plug_mode hot_plug_mo*/ void sii164_enable_hot_plug_detection (unsigned char enable_hot_plug) { -unsigned char detectReg; +unsigned char detect_reg; - detectReg =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_DETECT ); + detect_reg =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_DETECT );/* Depending on each DVI controller, need to enable the hot plug based * on each individual chip design.
@@ -364,11 +364,11 @@ unsigned char sii164_is_connected(void)*/ unsigned char sii164_check_interrupt (void ) { -unsigned char detectReg; +unsigned char detect_reg; - detectReg =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_DETECT ) & -SII164_DETECT_MONITOR_STATE_MASK ; -if (detectReg ==SII164_DETECT_MONITOR_STATE_CHANGE ) + detect_reg =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_DETECT ) & +SII164_DETECT_MONITOR_STATE_MASK ; +if (detect_reg ==SII164_DETECT_MONITOR_STATE_CHANGE )return 1 ;else return 0 ;
@@ -380,12 +380,12 @@ unsigned char sii164_check_interrupt(void)*/ void sii164_clear_interrupt (void ) { -unsigned char detectReg; +unsigned char detect_reg;/* Clear the MDI interrupt */ - detectReg =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_DETECT ); + detect_reg =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_DETECT );sm750_hw_i2c_write_reg (SII164_I2C_ADDRESS ,SII164_DETECT , - detectReg |SII164_DETECT_MONITOR_STATE_CLEAR ); + detect_reg |SII164_DETECT_MONITOR_STATE_CLEAR ); }#endif
Signature · 1 line
2.45.2
PATCH 8/8 staging: sm750fb: rename hotPlugValue to hot_plug_value
In reply to Ruben WautersRenames hotPlugValue to hot_plug_value
fixes checkpatch.pl's camel case check.
--- drivers/staging/sm750fb/ddk750_sii164.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/staging/sm750fb/ddk750_sii164.c +4 -4
@@ -344,11 +344,11 @@ void sii164_enable_hot_plug_detection(unsigned char enable_hot_plug)*/ unsigned char sii164_is_connected (void ) { -unsigned char hotPlugValue; +unsigned char hot_plug_value; - hotPlugValue =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_DETECT ) & -SII164_DETECT_HOT_PLUG_STATUS_MASK ; -if (hotPlugValue ==SII164_DETECT_HOT_PLUG_STATUS_ON ) + hot_plug_value =sm750_hw_i2c_read_reg (SII164_I2C_ADDRESS ,SII164_DETECT ) & +SII164_DETECT_HOT_PLUG_STATUS_MASK ; +if (hot_plug_value ==SII164_DETECT_HOT_PLUG_STATUS_ON )return 1 ;else return 0 ;
Signature · 1 line
2.45.2
Greg Kroah-Hartman
maintainerRe: [PATCH 8/8] staging: sm750fb: rename hotPlugValue to hot_plug_value
Quoted 14 lines · Ruben Wauters
Renames hotPlugValue to
hot_plug_valuefixes checkpatch.pl's camel case check.
Signed-off-by Ruben Wauters <[email protected]>--- drivers/staging/sm750fb/ddk750_sii164.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)drivers/staging/sm750fb/ddk750_sii164.c +0
-0
drivers/staging/sm750fb/ddk750_sii164.c void sii164_enable_hot_plug_detection(unsigned char enable_hot_plug) · line 345
Quoted 2 lines
drivers/staging/sm750fb/ddk750_sii164.c +0
-0@@ -344,11 +344,11 @@ void sii164_enable_hot_plug_detection(unsigned char enable_hot_plug)*/ unsigned char sii164_is_connected (void )
This should be returning a boolean, right? Not your fault, just noticed it for further potential cleanups if you want to do that.
thanks,
greg k-h