configs/warp7: Bump U-Boot and kernel versions
PATCH 1/2 configs/warp7: Bump U-Boot and kernel versions
Bump U-Boot to 2025.04 and kernel to version 6.12.24.
--- configs/warp7_defconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
configs/warp7_defconfig +3 -3
@@ -1,14 +1,14 @@ BR2_arm=y BR2_cortex_a7=y BR2_ARM_FPU_NEON_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" BR2_ROOTFS_OVERLAY="board/warp7/rootfs_overlay" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.24" BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx7s-warp"
@@ -23,7 +23,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="warp7" BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.10" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.04" BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_FORMAT_DTB_IMX=y BR2_PACKAGE_HOST_DOSFSTOOLS=y
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH 2/2 configs/warp7: Improve Wifi instructions
The "modprobe brcmfmac" command is not necessary because this driver is automatically loaded.
Remove the "iwconfig" line as it is considered deprecated:
warning: `iwconfig' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
Remove the "-Dwext" parameter as it is not supported by the default kernel configuration:
wlan0: Unsupported driver 'wext'
Tested Wifi by following the updated commands.
--- board/warp7/readme.txt | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
board/warp7/readme.txt +1 -3
@@ -107,11 +107,9 @@ To boot your newly created system: Using Wifi ========== -# modprobe brcmfmac -# iwconfig wlan0 essid ACCESSPOINTNAME # wpa_passphrase ACCESSPOINTNAME > /etc/wpa.conf (enter the wifi password and press enter) -# wpa_supplicant -Dwext -iwlan0 -c /etc/wpa.conf & +# wpa_supplicant -iwlan0 -c /etc/wpa.conf & # udhcpc -i wlan0 # ping buildroot.org
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 2/2] configs/warp7: Improve Wifi instructions
Quoted 7 lines · Fabio Estevam
The "modprobe brcmfmac" command is not necessary because this driver is automatically loaded.
Remove the "iwconfig" line as it is considered deprecated:
warning: `iwconfig' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
Quoted 8 lines
Remove the "-Dwext" parameter as it is not supported by the default kernel configuration:
wlan0: Unsupported driver 'wext'
Tested Wifi by following the updated commands.
Signed-off-by Fabio Estevam <[email protected]>
Applied to 2025.02.x, thanks.
Regards,
Arnout
Quoted 11 lines
--- board/warp7/readme.txt | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)board/warp7/readme.txt +0
-0@@ -107,11 +107,9 @@ To boot your newly created system: Using Wifi ==========
board/warp7/readme.txt To boot your newly created system: · line 115
Quoted 10 lines
board/warp7/readme.txt +1
-3-# modprobe brcmfmac -# iwconfig wlan0 essid ACCESSPOINTNAME # wpa_passphrase ACCESSPOINTNAME > /etc/wpa.conf (enter the wifi password and press enter) -# wpa_supplicant -Dwext -iwlan0 -c /etc/wpa.conf & +# wpa_supplicant -iwlan0 -c /etc/wpa.conf & # udhcpc -i wlan0 # ping buildroot.org
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Hi Fabio,
Quoted 3 lines · Fabio Estevam
Bump U-Boot to 2025.04 and kernel to version 6.12.24.
Signed-off-by Fabio Estevam <[email protected]>
Series applied to master, thanks.
For info, I added a missing BR2_TARGET_UBOOT_NEEDS_GNUTLS=y (build was failing in the docker image).
As followup maintenance patches, could you also add custom hashes (i.e. add BR2_DOWNLOAD_FORCE_CHECK_HASHES=y and remove the .checkpackageignore entry). See for example commit [1].
Also, there was a decision last year to move defconfigs toward using Bootlin external toolchains. See [2]. To make sure this compiler change will not prevent the board to boot, a test with an actual board is preferable. Doing so while updating defconfig kernel/uboot is a good time to do so. See for example commit [3].
Best regards,
Julien.
[1] https://gitlab.com/buildroot.org/buildroot/-/commit/b71d7eae59f82683e547b60f06538c4a2af8c5d3
[2] https://elinux.org/Buildroot:DeveloperDaysELCE2024#Rules_for_defconfigs
[3] https://gitlab.com/buildroot.org/buildroot/-/commit/310ab7d53393288aba5c574c49a6cae1bf1e1a1d
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot