Skip to contentSkip to conversation

commit dd4cf8c9e1f4 leads to failed boot

DISCUSSION Bert Karwatzki 5 participants 20 messages Apr 23, 2025 – Apr 25, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Hardware:
CPU (from /proc/cpuinfo):
vendor_id : AuthenticAMD
cpu family : 25
model : 80
model name : AMD Ryzen 7 5800H with Radeon Graphics
stepping : 0
microcode : 0xa50000c

$ lspci -nn
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne Root Complex [1022:1630]
00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne IOMMU [1022:1631]
00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge [1022:1632]
00:01.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge [1022:1633]
00:02.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge [1022:1632]
00:02.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge [1022:1634]
00:02.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge [1022:1634]
00:02.3 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge [1022:1634]
00:02.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge [1022:1634]
00:08.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge [1022:1632]
00:08.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus [1022:1635]
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 51)
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 51)
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 0 [1022:166a]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 1 [1022:166b]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 2 [1022:166c]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 3 [1022:166d]
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 4 [1022:166e]
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 5 [1022:166f]
00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 6 [1022:1670]
00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 7 [1022:1671]
01:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Upstream Port of PCI Express Switch [1002:1478] (rev c3)
02:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Downstream Port of PCI Express Switch [1002:1479]
03:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 23 [Radeon RX 6600/6600 XT/6600M] [1002:73ff] (rev c3)
03:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21/23 HDMI/DP Audio Controller [1002:ab28]
04:00.0 Network controller [0280]: MEDIATEK Corp. MT7921K (RZ608) Wi-Fi 6E 80MHz [14c3:0608]
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
06:00.0 Non-Volatile memory controller [0108]: Kingston Technology Company, Inc. KC3000/FURY Renegade NVMe SSD [E18] [2646:5013] (rev 01)
07:00.0 Non-Volatile memory controller [0108]: Micron/Crucial Technology P1 NVMe PCIe SSD[Frampton] [c0a9:2263] (rev 03)
08:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Cezanne [Radeon Vega Series / Radeon Vega Mobile Series] [1002:1638] (rev c5)
08:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Renoir Radeon High Definition Audio Controller [1002:1637]
08:00.2 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor [1022:15df]
08:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1 [1022:1639]
08:00.4 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1 [1022:1639]
08:00.5 Multimedia controller [0480]: Advanced Micro Devices, Inc. [AMD] ACP/ACP3X/ACP6x Audio Coprocessor [1022:15e2] (rev 01)
08:00.6 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h/19h/1ah HD Audio Controller [1022:15e3]
08:00.7 Signal processing controller [1180]: Advanced Micro Devices, Inc. [AMD] Sensor Fusion Hub [1022:15e4]

Bert Karwatzki

#1 lore raw
Quoted 7 lines · Bert Karwatzki

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Hello,

On AMD platform as well boot failed starting next-20250422, bisecting the issue led me to same commit dd4cf8c9e1f4. I have attached kernel config and logs.

Quoted 48 lines

Hardware:
CPU (from /proc/cpuinfo):
vendor_id : AuthenticAMD
cpu family : 25
model : 80
model name : AMD Ryzen 7 5800H with Radeon Graphics
stepping : 0
microcode : 0xa50000c

$ lspci -nn
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne Root Complex [1022:1630]
00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne IOMMU [1022:1631]
00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge [1022:1632]
00:01.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge [1022:1633]
00:02.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge [1022:1632]
00:02.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge [1022:1634]
00:02.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge [1022:1634]
00:02.3 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge [1022:1634]
00:02.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge [1022:1634]
00:08.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge [1022:1632]
00:08.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus [1022:1635]
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 51)
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 51)
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 0 [1022:166a]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 1 [1022:166b]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 2 [1022:166c]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 3 [1022:166d]
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 4 [1022:166e]
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 5 [1022:166f]
00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 6 [1022:1670]
00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 7 [1022:1671]
01:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Upstream Port of PCI Express Switch [1002:1478] (rev c3)
02:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Downstream Port of PCI Express Switch [1002:1479]
03:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 23 [Radeon RX 6600/6600 XT/6600M] [1002:73ff] (rev c3)
03:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21/23 HDMI/DP Audio Controller [1002:ab28]
04:00.0 Network controller [0280]: MEDIATEK Corp. MT7921K (RZ608) Wi-Fi 6E 80MHz [14c3:0608]
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
06:00.0 Non-Volatile memory controller [0108]: Kingston Technology Company, Inc. KC3000/FURY Renegade NVMe SSD [E18] [2646:5013] (rev 01)
07:00.0 Non-Volatile memory controller [0108]: Micron/Crucial Technology P1 NVMe PCIe SSD[Frampton] [c0a9:2263] (rev 03)
08:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Cezanne [Radeon Vega Series / Radeon Vega Mobile Series] [1002:1638] (rev c5)
08:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Renoir Radeon High Definition Audio Controller [1002:1637]
08:00.2 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor [1022:15df]
08:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1 [1022:1639]
08:00.4 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1 [1022:1639]
08:00.5 Multimedia controller [0480]: Advanced Micro Devices, Inc. [AMD] ACP/ACP3X/ACP6x Audio Coprocessor [1022:15e2] (rev 01)
08:00.6 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h/19h/1ah HD Audio Controller [1022:15e3]
08:00.7 Signal processing controller [1180]: Advanced Micro Devices, Inc. [AMD] Sensor Fusion Hub [1022:15e4]
Quoted 2 lines

Bert Karwatzki

[  OK  ] Reached target shutdown.target - System Shutdown.
[  OK  ] Reached target final.target - Late Shutdown Services.
[  OK  ] Finished systemd-reboot.service - System Reboot.
[  OK  ] Reached target reboot.target - System Reboot.
[399481.481515] reboot: Restarting system

cERROR: Class:0; Subclass:20000; Operation: 100B
EfiInitializeDriverLib: Started
€ BIOS version: RPUT1005B.FD Platform name: PURICO
EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path

[    0.000000] Linux version 6.15.0-rc3-next-20250422-2c9c612abe-1d2c58af2b2 (root@xxxx) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Apr 22 11:22:49 UTC 2025
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.15.0-rc3-next-20250422-2c9c612abe-1d2c58af2b2 root=UUID=b44dba70-a64a-4130-8e91-bec73006bf60 ro console=ttyS1,115200n8 earlyprintk=serial,ttyS1,115200n8
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] SEV-SNP: RMP table physical range [0x0000018277e00000 - 0x00000183fbefffff]
[    0.000000] x86/split lock detection: #DB: warning on user-space bus_locks
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000075b5ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000075b60000-0x0000000075bb7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000075bb8000-0x0000000075c5ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000075c60000-0x0000000075ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000076000000-0x00000000953e1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000953e2000-0x0000000099a66fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000099a67000-0x0000000099b51fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000099b52000-0x0000000099fd2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000099fd3000-0x000000009dffefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009dfff000-0x000000009fff9fff] usable
[    0.000000] BIOS-e820: [mem 0x000000009fffa000-0x000000009fffefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009ffff000-0x000000009fffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a0000000-0x00000000afffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b4000000-0x00000000b4000fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b5080000-0x00000000b5080fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000be100000-0x00000000be100fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bf000fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d0080000-0x00000000d0080fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d1100000-0x00000000d1100fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ec200000-0x00000000ec2fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ec400000-0x00000000ec400fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ed180000-0x00000000ed180fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc0000-0x00000000fedc0fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedc5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc7000-0x00000000fedc7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc9000-0x00000000fedcafff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x000000010000ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100010000-0x000000fc4fffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000fc50000000-0x000000ffffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000010000000000-0x0000018277dfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000018277e00000-0x00000183fbefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000183fbf00000-0x00000183fbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000183fc000000-0x00000183fc7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000183fc800000-0x00000183fcdbffff] usable
[    0.000000] BIOS-e820: [mem 0x00000183fcdc0000-0x00000183ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00003ffb00000000-0x00003ffb1fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00003ffc00000000-0x00003ffc03ffffff] reserved
[    0.000000] printk: legacy bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] efi: EFI v2.9 by American Megatrends
[    0.000000] efi: ACPI=0x99b51000 ACPI 2.0=0x99b51014 SMBIOS=0x9daed000 SMBIOS 3.0=0x9daec000 MEMATTR=0x9144a018 ESRT=0x91449698 MOKvar=0x9dcb1000 INITRD=0x9069da18 
[    0.000000] efi: Not removing mem50: MMIO range=[0xb4000000-0xb4000fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem51: MMIO range=[0xb5080000-0xb5080fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem52: MMIO range=[0xbe100000-0xbe100fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem53: MMIO range=[0xbf000000-0xbf000fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem54: MMIO range=[0xd0080000-0xd0080fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem55: MMIO range=[0xd1100000-0xd1100fff] (4KB) from e820 map
[    0.000000] efi: Remove mem56: MMIO range=[0xec200000-0xec2fffff] (1MB) from e820 map
[    0.000000] efi: Not removing mem57: MMIO range=[0xec400000-0xec400fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem58: MMIO range=[0xed180000-0xed180fff] (4KB) from e820 map
[    0.000000] efi: Remove mem59: MMIO range=[0xfea00000-0xfeafffff] (1MB) from e820 map
[    0.000000] efi: Not removing mem60: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem61: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem62: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem63: MMIO range=[0xfed40000-0xfed44fff] (20KB) from e820 map
[    0.000000] efi: Not removing mem64: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
[    0.000000] efi: Not removing mem65: MMIO range=[0xfedc0000-0xfedc0fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem66: MMIO range=[0xfedc2000-0xfedc5fff] (16KB) from e820 map
[    0.000000] efi: Not removing mem67: MMIO range=[0xfedc7000-0xfedc7fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem68: MMIO range=[0xfedc9000-0xfedcafff] (8KB) from e820 map
[    0.000000] efi: Remove mem69: MMIO range=[0xfee00000-0xfeefffff] (1MB) from e820 map
[    0.000000] efi: Remove mem70: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[    0.000000] efi: Remove mem75: MMIO range=[0x3ffb00000000-0x3ffb1fffffff] (512MB) from e820 map
[    0.000000] efi: Remove mem76: MMIO range=[0x3ffc00000000-0x3ffc03ffffff] (64MB) from e820 map
[    0.000000] SMBIOS 3.7.0 present.
[    0.000000] DMI: AMD Corporation PURICO/PURICO, BIOS RPUT1005B 04/08/2025
[    0.000000] DMI: Memory slots populated: 24/24
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2695.931 MHz processor
[    0.001173] last_pfn = 0x183fcdc0 max_arch_pfn = 0x10000000000
[    0.007485] MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs
[    0.016788] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
Memory KASLR using RDRAND RDTSC...
[    0.027993] x2apic: enabled by BIOS, switching to x2apic ops
[    0.034297] last_pfn = 0xa0000 max_arch_pfn = 0x10000000000
[    0.044000] SEV-SNP: Reserving start/end of RMP table on a 2MB boundary [0x00000183fbe00000]
[    0.053222] esrt: Reserving ESRT space from 0x0000000091449698 to 0x00000000914496d0.
[    0.061964] Using GB pages for direct mapping
[    0.067361] Secure boot disabled
[    0.070759] RAMDISK: [mem 0x8cc81000-0x8e5f1fff]
[    0.075904] ACPI: Early table checksum verification disabled
[    0.082203] ACPI: RSDP 0x0000000099B51014 000024 (v02 AMD   )
[    0.088600] ACPI: XSDT 0x0000000099B50728 000104 (v01 AMD    AmdTable 03042021 AMI  01000013)
[    0.098105] ACPI: FACP 0x0000000099B44000 000114 (v06 AMD    AmdTable 03042021 AMI  00000005)
[    0.107606] ACPI: DSDT 0x0000000099B1E000 025A5F (v02 AMD    AmdTable 03042021 INTL 20220331)
[    0.117106] ACPI: FACS 0x0000000099FB2000 000040
[    0.122244] ACPI: SSDT 0x0000000099B4D000 00267F (v02 AMD    CPMI3CSA 00000001 INTL 20220331)
[    0.131746] ACPI: SPMI 0x0000000099B4C000 000041 (v05 AMD    AmdTable 00000000 AMI. 00000005)
[    0.141248] ACPI: SSDT 0x0000000099B4B000 000104 (v02 AMD    MPDMA    00000001 INTL 20220331)
[    0.150750] ACPI: SSDT 0x0000000099B4A000 0000F4 (v02 AMD    SMU-HSMP 00000001 INTL 20220331)
[    0.160252] ACPI: SSDT 0x0000000099B46000 003E4A (v02 AMD    AMD AFC  00000001 INTL 20220331)
[    0.169754] ACPI: SSDT 0x0000000099B45000 000067 (v02 AMD    CPMDSM   00000001 INTL 20220331)
[    0.179256] ACPI: FIDT 0x0000000099B1D000 00009C (v01 AMD    AmdTable 03042021 AMI  00000005)
[    0.188758] ACPI: MCFG 0x0000000099B1C000 00003C (v01 AMD    AmdTable 03042021 AMI  00000005)
[    0.198260] ACPI: SSDT 0x0000000099B1A000 001E2D (v02 AMD    CPUSSDT  03042021 AMI  03042021)
[    0.207762] ACPI: HPET 0x0000000099B19000 000038 (v01 AMD    AmdTable 03042021 AMI  00000005)
[    0.217264] ACPI: SSDT 0x0000000099B17000 001963 (v02 AMD    CPMRAS   00000001 INTL 20220331)
[    0.226766] ACPI: BERT 0x0000000099B16000 000030 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.236268] ACPI: HEST 0x0000000099B15000 000A14 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.245770] ACPI: PHAT 0x0000000099B14000 00010B (v01 AMD    AMD PHAT 00000000 AMD  00000001)
[    0.255272] ACPI: IVRS 0x0000000099B13000 000440 (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.264774] ACPI: FPDT 0x0000000099B12000 000034 (v01 AMD    AmdTable 01072009 AMI  01000013)
[    0.274276] ACPI: PRMT 0x0000000099B11000 000196 (v01 AMD    AmdTable 01072009 AMI  01000013)
[    0.283778] ACPI: BGRT 0x0000000099B10000 000038 (v01 AMD    AmdTable 03042021 AMI  00010013)
[    0.293280] ACPI: ASPT 0x0000000099B0F000 000070 (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.302782] ACPI: SSDT 0x0000000099AD1000 03D22E (v02 AMD    AMD CPU  00000001 AMD  00000001)
[    0.312284] ACPI: SRAT 0x0000000099ACF000 0018D0 (v03 AMD    AMD SRAT 00000001 AMD  00000001)
[    0.321786] ACPI: MSCT 0x0000000099ACE000 00004E (v01 AMD    AmdTable 00000000 AMD  00000001)
[    0.331288] ACPI: SLIT 0x0000000099ACD000 00002D (v01 AMD    AMD SLIT 00000001 AMD  00000001)
[    0.340790] ACPI: HMAT 0x0000000099ACC000 0000A4 (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.350292] ACPI: SSDT 0x0000000099ACA000 00193C (v02 AMD    CPMCMN   00000001 INTL 20220331)
[    0.359794] ACPI: WSMT 0x0000000099AC9000 000028 (v01 AMD    AmdTable 03042021 AMI  00000005)
[    0.369296] ACPI: APIC 0x0000000099AC7000 0018B8 (v06 AMD    AmdTable 03042021 AMI  00000005)
[    0.378798] ACPI: Reserving FACP table memory at [mem 0x99b44000-0x99b44113]
[    0.386651] ACPI: Reserving DSDT table memory at [mem 0x99b1e000-0x99b43a5e]
[    0.394504] ACPI: Reserving FACS table memory at [mem 0x99fb2000-0x99fb203f]
[    0.402359] ACPI: Reserving SSDT table memory at [mem 0x99b4d000-0x99b4f67e]
[    0.410212] ACPI: Reserving SPMI table memory at [mem 0x99b4c000-0x99b4c040]
[    0.418065] ACPI: Reserving SSDT table memory at [mem 0x99b4b000-0x99b4b103]
[    0.425920] ACPI: Reserving SSDT table memory at [mem 0x99b4a000-0x99b4a0f3]
[    0.433773] ACPI: Reserving SSDT table memory at [mem 0x99b46000-0x99b49e49]
[    0.441627] ACPI: Reserving SSDT table memory at [mem 0x99b45000-0x99b45066]
[    0.449480] ACPI: Reserving FIDT table memory at [mem 0x99b1d000-0x99b1d09b]
[    0.457334] ACPI: Reserving MCFG table memory at [mem 0x99b1c000-0x99b1c03b]
[    0.465188] ACPI: Reserving SSDT table memory at [mem 0x99b1a000-0x99b1be2c]
[    0.473042] ACPI: Reserving HPET table memory at [mem 0x99b19000-0x99b19037]
[    0.480895] ACPI: Reserving SSDT table memory at [mem 0x99b17000-0x99b18962]
[    0.488749] ACPI: Reserving BERT table memory at [mem 0x99b16000-0x99b1602f]
[    0.496602] ACPI: Reserving HEST table memory at [mem 0x99b15000-0x99b15a13]
[    0.504456] ACPI: Reserving PHAT table memory at [mem 0x99b14000-0x99b1410a]
[    0.512310] ACPI: Reserving IVRS table memory at [mem 0x99b13000-0x99b1343f]
[    0.520164] ACPI: Reserving FPDT table memory at [mem 0x99b12000-0x99b12033]
[    0.528017] ACPI: Reserving PRMT table memory at [mem 0x99b11000-0x99b11195]
[    0.535871] ACPI: Reserving BGRT table memory at [mem 0x99b10000-0x99b10037]
[    0.543724] ACPI: Reserving ASPT table memory at [mem 0x99b0f000-0x99b0f06f]
[    0.551578] ACPI: Reserving SSDT table memory at [mem 0x99ad1000-0x99b0e22d]
[    0.559432] ACPI: Reserving SRAT table memory at [mem 0x99acf000-0x99ad08cf]
[    0.567285] ACPI: Reserving MSCT table memory at [mem 0x99ace000-0x99ace04d]
[    0.575139] ACPI: Reserving SLIT table memory at [mem 0x99acd000-0x99acd02c]
[    0.582993] ACPI: Reserving HMAT table memory at [mem 0x99acc000-0x99acc0a3]
[    0.590847] ACPI: Reserving SSDT table memory at [mem 0x99aca000-0x99acb93b]
[    0.598701] ACPI: Reserving WSMT table memory at [mem 0x99ac9000-0x99ac9027]
[    0.606554] ACPI: Reserving APIC table memory at [mem 0x99ac7000-0x99ac88b7]
[    0.614475] APIC: Switched APIC routing to: cluster x2apic
[    0.620541] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.627207] ACPI: SRAT: Node 0 PXM 0 [mem 0x000c0000-0xafffffff]
[    0.633896] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0xfc4fffffff]
[    0.640878] ACPI: SRAT: Node 0 PXM 0 [mem 0x10000000000-0x183ffffffff]
[    0.648155] NUMA: Node 0 [mem 0x00001000-0x0009ffff] + [mem 0x000c0000-0xafffffff] -> [mem 0x00001000-0xafffffff]
[    0.659591] NUMA: Node 0 [mem 0x00001000-0xafffffff] + [mem 0x100000000-0xfc4fffffff] -> [mem 0x00001000-0xfc4fffffff]
[    0.671516] NUMA: Node 0 [mem 0x00001000-0xfc4fffffff] + [mem 0x10000000000-0x183fcdbffff] -> [mem 0x00001000-0x183fcdbffff]
[    0.684028] NODE_DATA(0) allocated [mem 0x183fcd94c40-0x183fcdbefff]
[    0.691931] Zone ranges:
[    0.694553]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.701436]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.708321]   Normal   [mem 0x0000000100000000-0x00000183fcdbffff]
[    0.715205]   Device   empty
[    0.718405] Movable zone start for each node
[    0.723156] Early memory node ranges
[    0.727131]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.734112]   node   0: [mem 0x0000000000100000-0x0000000075b5ffff]
[    0.741093]   node   0: [mem 0x0000000075bb8000-0x0000000075c5ffff]
[    0.748074]   node   0: [mem 0x0000000076000000-0x00000000953e1fff]
[    0.755055]   node   0: [mem 0x000000009dfff000-0x000000009fff9fff]
[    0.762036]   node   0: [mem 0x000000009ffff000-0x000000009fffffff]
[    0.769017]   node   0: [mem 0x0000000100010000-0x000000fc4fffffff]
[    0.776036]   node   0: [mem 0x0000010000000000-0x0000018277dfffff]
[    0.782999]   node   0: [mem 0x00000183fbf00000-0x00000183fbffffff]
[    0.789961]   node   0: [mem 0x00000183fc800000-0x00000183fcdbffff]
[    0.796942] Initmem setup node 0 [mem 0x0000000000001000-0x00000183fcdbffff]
[    0.804799] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.811301] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.818638] On node 0, zone DMA32: 88 pages in unavailable ranges
[    0.825481] On node 0, zone DMA32: 928 pages in unavailable ranges
[    0.832329] On node 0, zone DMA32: 35869 pages in unavailable ranges
[    0.839253] On node 0, zone DMA32: 5 pages in unavailable ranges
[    1.349972] On node 0, zone Normal: 16 pages in unavailable ranges
[    1.618695] On node 0, zone Normal: 16640 pages in unavailable ranges
[    1.625701] On node 0, zone Normal: 2048 pages in unavailable ranges
[    1.632813] On node 0, zone Normal: 12864 pages in unavailable ranges
[    1.640011] ACPI: PM-Timer IO Port: 0x808
[    1.644439] ACPI: X2APIC_NMI (uid[0xffffffff] high edge lint[0x1])
[    1.651296] IOAPIC[0]: apic_id 128, version 33, address 0xfec00000, GSI 0-23
[    1.659139] IOAPIC[1]: apic_id 240, version 33, address 0xec400000, GSI 24-55
[    1.667090] IOAPIC[2]: apic_id 241, version 33, address 0xd0080000, GSI 56-87
[    1.675040] IOAPIC[3]: apic_id 242, version 33, address 0xed180000, GSI 88-119
[    1.683088] IOAPIC[4]: apic_id 243, version 33, address 0xb5080000, GSI 120-151
[    1.691233] IOAPIC[5]: apic_id 244, version 33, address 0xbf000000, GSI 152-183
[    1.699377] IOAPIC[6]: apic_id 245, version 33, address 0xd1100000, GSI 184-215
[    1.707522] IOAPIC[7]: apic_id 246, version 33, address 0xb4000000, GSI 216-247
[    1.715666] IOAPIC[8]: apic_id 247, version 33, address 0xbe100000, GSI 248-279
[    1.723810] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    1.730887] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    1.738162] ACPI: Using ACPI (MADT) for SMP configuration information
[    1.745334] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    1.751081] CPU topo: Max. logical packages:   1
[    1.756193] CPU topo: Max. logical dies:      16
[    1.761332] CPU topo: Max. dies per package:  16
[    1.766472] CPU topo: Max. threads per core:   2
[    1.771610] CPU topo: Num. cores per package:   128
[    1.777040] CPU topo: Num. threads per package: 256
[    1.782469] CPU topo: Allowing 256 present CPUs plus 0 hotplug CPUs
[    1.789480] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    1.797886] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    1.806321] PM: hibernation: Registered nosave memory: [mem 0x75b60000-0x75bb7fff]
[    1.814756] PM: hibernation: Registered nosave memory: [mem 0x75c60000-0x75ffffff]
[    1.823192] PM: hibernation: Registered nosave memory: [mem 0x91449000-0x91449fff]
[    1.831628] PM: hibernation: Registered nosave memory: [mem 0x91b68000-0x91bbafff]
[    1.840063] PM: hibernation: Registered nosave memory: [mem 0x953e2000-0x9dffefff]
[    1.848498] PM: hibernation: Registered nosave memory: [mem 0x9fffa000-0x9fffefff]
[    1.856934] PM: hibernation: Registered nosave memory: [mem 0xa0000000-0x10000ffff]
[    1.865466] PM: hibernation: Registered nosave memory: [mem 0xfc50000000-0xffffffffff]
[    1.874290] PM: hibernation: Registered nosave memory: [mem 0x18277e00000-0x183fc7fffff]
[    1.883308] [mem 0xd1101000-0xec3fffff] available for PCI devices
[    1.890094] Booting paravirtualized kernel on bare hardware
[    1.896300] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    1.907946] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:256 nr_cpu_ids:256 nr_node_ids:1
[    1.921079] percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u262144
[    1.928284] Kernel command line: BOOT_IMAGE=/vmlinuz-6.15.0-rc3-next-20250422-2c9c612abe-1d2c58af2b2 root=UUID=b44dba70-a64a-4130-8e91-bec73006bf60 ro console=ttyS1,115200n8 earlyprintk=serial,ttyS1,115200n8
[    1.948763] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.15.0-rc3-next-20250422-2c9c612abe-1d2c58af2b2", will be passed to user space.
[    1.963851] random: crng init done
[    1.967616] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    1.975373] printk: log_buf_len total cpu_extra contributions: 1044480 bytes
[    1.983227] printk: log_buf_len min size: 262144 bytes
[    1.989399] printk: log buffer data + meta data: 2097152 + 7340032 = 9437184 bytes
[    1.997646] printk: early log buf free: 240984(91%)
[    2.010392] Dentry cache hash table entries: 33554432 (order: 16, 268435456 bytes, linear)
[    2.023077] Inode-cache hash table entries: 16777216 (order: 15, 134217728 bytes, linear)
[    2.034773] software IO TLB: area num 256.
[    2.042624] Fallback order for Node 0: 0 
[    2.042637] Built 1 zonelists, mobility grouping on.  Total pages: 400946229
[    2.054761] Policy zone: Normal
[    2.058260] mem auto-init: stack:off, heap alloc:on, heap free:off
[    3.372699] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=256, Nodes=1
Poking KASLR using RDRAND RDTSC...
[    3.394768] ftrace: allocating 58538 entries in 232 pages
[    3.400591] ftrace: allocated 232 pages with 4 groups
[    3.407178] Dynamic Preempt: voluntary
[    3.411598] rcu: Preemptible hierarchical RCU implementation.
[    3.417798] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=256.
[    3.425555] 	Trampoline variant of Tasks RCU enabled.
[    3.431179] 	Rude variant of Tasks RCU enabled.
[    3.436220] 	Tracing variant of Tasks RCU enabled.
[    3.441553] rcu: RCU calculated value of scheduler-enlistment delay is 26 jiffies.
[    3.449989] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=256
[    3.457696] RCU Tasks: Setting shift to 8 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=256.
[    3.467542] RCU Tasks Rude: Setting shift to 8 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=256.
[    3.477919] RCU Tasks Trace: Setting shift to 8 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=256.
[    3.489258] ------------[ cut here ]------------
[    3.494207] WARNING: CPU: 0 PID: 0 at kernel/trace/trace_events.c:596 trace_event_raw_init+0x399/0x550
[    3.504581] Modules linked in:
[    3.507976] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.15.0-rc3-next-20250422-2c9c612abe-1d2c58af2b2 #1 PREEMPT(voluntary) 
[    3.521161] Hardware name: AMD Corporation PURICO/PURICO, BIOS RPUT1005B 04/08/2025
[    3.529694] RIP: 0010:trace_event_raw_init+0x399/0x550
[    3.535415] Code: ee 00 00 00 e8 b8 d5 ff ff 4c 8b 55 d0 84 c0 74 10 8b 4d cc 48 c7 c0 fe ff ff ff 48 d3 c0 49 21 c2 4d 85 d2 0f 84 99 fc ff ff <0f> 0b ba 01 00 00 00 41 f6 c2 01 75 0c 49 d1 ea 83 c2 01 41 f6 c2
[    3.556358] RSP: 0000:ffffffff83c03d58 EFLAGS: 00010002
[    3.562175] RAX: 0000000000000000 RBX: 00000000000000bb RCX: 0000000000000072
[    3.570125] RDX: 000000000000005b RSI: 000000000000005b RDI: ffffffff838ebf5f
[    3.578076] RBP: ffffffff83c03da0 R08: 000000000000003e R09: 0000000000000000
[    3.586027] R10: 0000000000000020 R11: 0000000000000093 R12: ffffffff83cb0480
[    3.593978] R13: ffffffff83cb0513 R14: ffffffff83cb2740 R15: 0000000000000093
[    3.601929] FS:  0000000000000000(0000) GS:ff43b11835c6d000(0000) knlGS:0000000000000000
[    3.610946] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.617345] CR2: ff43b11f3cbff000 CR3: 00000003ed060001 CR4: 00000000000210b0
[    3.625296] Call Trace:
[    3.628011]  <TASK>
[    3.630338]  event_init+0x30/0x80
[    3.634022]  trace_event_init+0x104/0x670
[    3.638482]  trace_init+0x28/0x5b0
[    3.642264]  ? mutex_lock+0x16/0x50
[    3.646142]  ? shrinker_register+0x72/0xa0
[    3.650699]  start_kernel+0x59b/0xb90
[    3.654771]  ? sme_unmap_bootdata+0x18/0x70
[    3.659425]  x86_64_start_reservations+0x1c/0x30
[    3.664564]  x86_64_start_kernel+0xbe/0x110
[    3.669217]  ? soft_restart_cpu+0x14/0x14
[    3.673678]  common_startup_64+0x13e/0x141
[    3.678235] RIP: 1f0f:0x2e66000000000084
[    3.682598] Code: Unable to access opcode bytes at 0x2e6600000000005a.
[    3.689870] RSP: 0000:00841f0f2e660000 EFLAGS: 841f0f2e66 ORIG_RAX: 1f0f2e6600000000
[    3.698499] RAX: 1f0f2e6600000000 RBX: 1f0f2e6600000000 RCX: 2e66000000000084
[    3.706450] RDX: 0000000000841f0f RSI: 000000841f0f2e66 RDI: 00841f0f2e660000
[    3.714400] RBP: 00841f0f2e660000 R08: 00841f0f2e660000 R09: 000000841f0f2e66
[    3.722351] R10: 0000000000841f0f R11: 2e66000000000084 R12: 000000841f0f2e66
[    3.730302] R13: 0000000000841f0f R14: 2e66000000000084 R15: 1f0f2e6600000000
[    3.738253]  </TASK>
[    3.740676] ---[ end trace 0000000000000000 ]---
[    3.745816] event sched_skip_cpuset_numa has unsafe dereference of argument 6
[    3.753766] print_fmt: "comm=%s pid=%d tgid=%d ngid=%d mem_nodes_allowed=%*pbl", REC->comm, REC->pid, REC->tgid, REC->ngid, __nodemask_pr_numnodes(REC->mem_allowed_ptr), __nodemask_pr_bits(REC->mem_allowed_ptr)
[    3.775816] NR_IRQS: 524544, nr_irqs: 6824, preallocated irqs: 16
[    3.782664] rcu: srcu_init: Setting srcu_struct sizes to big.
[    3.789044] Console: colour dummy device 80x25
[    3.793832] printk: legacy console [ttyS1] enabled
[    3.793832] printk: legacy console [ttyS1] enabled
[    3.804488] printk: legacy bootconsole [earlyser0] disabled
[    3.804488] printk: legacy bootconsole [earlyser0] disabled
[    3.816973] ACPI: Core revision 20241212
[    3.821656] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    3.831856] APIC: Switch to symmetric I/O mode setup
[    3.837552] AMD-Vi: ivrs, add hid:AMDI0096, uid:ID01, rdevid:0xe000
[    3.844607] AMD-Vi: ivrs, add hid:AMDI0020, uid:ID00, rdevid:0xa0
[    3.851404] AMD-Vi: ivrs, add hid:AMDI0020, uid:ID01, rdevid:0xa0
[    3.858201] AMD-Vi: ivrs, add hid:AMDI0020, uid:ID02, rdevid:0xa0
[    3.865000] AMD-Vi: ivrs, add hid:AMDI0020, uid:ID03, rdevid:0xa0
[    3.871797] AMD-Vi: ivrs, add hid:AMDI0095, uid:ID00, rdevid:0x0
[    3.878528] AMD-Vi: Using global IVHD EFR:0xa5bf732fa2295afe, EFR2:0x53d
[    3.888065] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    3.911857] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26dc3ad6304, max_idle_ns: 440795319712 ns
[    3.923597] Calibrating delay loop (skipped), value calculated using timer frequency.. 5391.86 BogoMIPS (lpj=10783724)
[    3.927614] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    3.931802] LVT offset 2 assigned for vector 0xf4
[    3.935655] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 32
[    3.939596] Last level dTLB entries: 4KB 128, 2MB 128, 4MB 64, 1GB 0
[    3.943597] process: using mwait in idle threads
[    3.947597] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    3.951597] Spectre V2 : Mitigation: Retpolines
[    3.955596] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[    3.959596] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    3.963597] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    3.967596] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    3.971596] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    3.975597] Speculative Return Stack Overflow: Reducing speculation to address VM/HV SRSO attack vector.
[    3.979596] Speculative Return Stack Overflow: Mitigation: Reduced Speculation
[    3.983602] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    3.987596] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    3.991596] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    3.995596] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[    3.999596] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[    4.003596] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[    4.007596] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    4.011596] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[    4.015596] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    4.019596] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
[    4.023596] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
[    4.027596] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[    4.031596] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
[    4.035596] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]:   16
[    4.039596] x86/fpu: Enabled xstate features 0xae7, context size is 2456 bytes, using 'compacted' format.
[    4.064989] Freeing SMP alternatives memory: 52K
[    4.067597] pid_max: default: 262144 minimum: 2048
[    4.076595] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,ima,evm
[    4.079652] landlock: Up and running.
[    4.083596] Yama: becoming mindful.
[    4.087665] AppArmor: AppArmor initialized
[    4.091840] Mount-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    4.095767] Mountpoint-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    4.208808] smpboot: CPU0: AMD EPYC 9755 128-Core Processor (family: 0x1a, model: 0x2, stepping: 0x1)
[    4.211747] Performance Events: Fam17h+ 16-deep LBR, core perfctr, AMD PMU driver.
[    4.215596] ... version:                2
[    4.219596] ... bit width:              48
[    4.223596] ... generic registers:      6
[    4.227596] ... value mask:             0000ffffffffffff
[    4.231596] ... max period:             00007fffffffffff
[    4.235596] ... fixed-purpose events:   0
[    4.239596] ... event mask:             000000000000003f
[    4.243818] signal: max sigframe size: 3376
[    4.247618] rcu: Hierarchical SRCU implementation.
[    4.251596] rcu: 	Max phase no-delay instances is 1000.
[    4.255621] Timer migration: 3 hierarchy levels; 8 children per group; 3 crossnode level
[    4.259787] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    4.268105] smp: Bringing up secondary CPUs ...
[    4.271663] smpboot: x86: Booting SMP configuration:
[    4.275597] .... node  #0, CPUs:          #1   #2   #3   #4   #5   #6   #7   #8   #9  #10  #11  #12  #13  #14  #15  #16  #17  #18  #19  #20  #21  #22  #23  #24  #25  #26  #27  #28  #29  #30  #31  #32  #33  #34  #35  #36  #37  #38  #39  #40  #41  #42  #43  #44  #45  #46  #47  #48  #49  #50  #51  #52  #53  #54  #55  #56  #57  #58  #59  #60  #61  #62  #63  #64  #65  #66  #67  #68  #69  #70  #71  #72  #73  #74  #75  #76  #77  #78  #79  #80  #81  #82  #83  #84  #85  #86  #87  #88  #89  #90  #91  #92  #93  #94  #95  #96  #97  #98  #99 #100 #101 #102 #103 #104 #105 #106 #107 #108 #109 #110 #111 #112 #113 #114 #115 #116 #117 #118 #119 #120 #121 #122 #123 #124 #125 #126 #127 #128 #129 #130 #131 #132 #133 #134 #135 #136 #137 #138 #139 #140 #141 #142 #143 #144 #145 #146 #147 #148 #149 #150 #151 #152 #153 #154 #155 #156 #157 #158 #159 #160 #161 #162 #163 #164 #165 #166 #167 #168 #169 #170 #171 #172 #173 #174 #175 #176 #177 #178 #179 #180 #181 #182 #183 #184 #185 #186 #187 #188 #189 #190 #191 #192 #193 #194 #195 #196 #197 #198
[    4.331230]  #199 #200 #201 #202 #203 #204 #205 #206 #207 #208 #209 #210 #211 #212 #213 #214 #215 #216 #217 #218 #219 #220 #221 #222 #223 #224 #225 #226 #227 #228 #229 #230 #231 #232 #233 #234 #235 #236 #237 #238 #239 #240 #241 #242 #243 #244 #245 #246 #247 #248 #249 #250 #251 #252 #253 #254 #255
[    4.341393] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    4.371870] smp: Brought up 1 node, 256 CPUs
[    4.375599] smpboot: Total of 256 processors activated (1380316.67 BogoMIPS)
[    4.388017] Memory: 1577897224K/1603784916K available (21241K kernel code, 4709K rwdata, 8664K rodata, 5164K init, 4260K bss, 25675128K reserved, 0K cma-reserved)
[    4.404006] devtmpfs: initialized
[    4.407653] x86/mm: Memory block size: 2048MB
[    4.419242] ACPI: PM: Registering ACPI NVS region [mem 0x75b60000-0x75bb7fff] (360448 bytes)
[    4.419600] ACPI: PM: Registering ACPI NVS region [mem 0x99b52000-0x99fd2fff] (4722688 bytes)
[    4.423660] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    4.427682] posixtimers hash table entries: 131072 (order: 9, 2097152 bytes, linear)
[    4.431792] futex hash table entries: 65536 (order: 10, 4194304 bytes, linear)
[    4.435784] pinctrl core: initialized pinctrl subsystem
[    4.439670] PM: RTC time: 11:33:25, date: 2025-04-22
[    4.443891] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    4.447871] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    4.451751] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    4.455754] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    4.459600] audit: initializing netlink subsys (disabled)
[    4.463616] audit: type=2000 audit(1745321604.596:1): state=initialized audit_enabled=0 res=1
[    4.463678] thermal_sys: Registered thermal governor 'fair_share'
[    4.467596] thermal_sys: Registered thermal governor 'bang_bang'
[    4.471596] thermal_sys: Registered thermal governor 'step_wise'
[    4.475596] thermal_sys: Registered thermal governor 'user_space'
[    4.479596] thermal_sys: Registered thermal governor 'power_allocator'
[    4.483626] cpuidle: using governor ladder
[    4.491612] cpuidle: using governor menu
[    4.499961] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    4.503647] PCI: ECAM [mem 0x3ffb00000000-0x3ffb0fffffff] (base 0x3ffb00000000) for domain 0000 [bus 00-ff]
[    4.507607] PCI: Using configuration type 1 for base access
[    4.511636] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    4.515717] HugeTLB: allocation took 0ms with hugepage_allocation_threads=64
[    4.519600] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    4.523596] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    4.527598] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    4.531596] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    4.535737] Failed to find VA for GUID: 7626C6AE-F973-429C-A91C-107D7BE298B0, PA: 0x0
[    4.535737] Failed to find VA for GUID: 0639BD1C-3E33-4055-BAE7-36CCEBA8376E, PA: 0x0
[    4.539596] Failed to find VA for GUID: E7180659-A65D-451D-92CD-2B56F12BEBA6, PA: 0x0
[    4.543596] Failed to find VA for GUID: 00C77891-7FCB-4D01-94E1-72F8E4EE1AF7, PA: 0x0
[    4.547596] Failed to find VA for GUID: D1C6B8F2-F9AC-4BF0-855E-DBD582CE4B20, PA: 0x0
[    4.551596] Failed to find VA for GUID: 69AA0A9C-E3FC-4B0D-929E-AA1BDE5D9A9B, PA: 0x0
[    4.555596] Failed to find VA for GUID: EE41B397-25D4-452C-AD54-48C6E3480B94, PA: 0x0
[    4.559598] PRM: found 1 modules
[    4.567648] ACPI: Added _OSI(Module Device)
[    4.571596] ACPI: Added _OSI(Processor Device)
[    4.575596] ACPI: Added _OSI(3.0 _SCP Extensions)
[    4.579596] ACPI: Added _OSI(Processor Aggregator Device)
[    4.602887] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    4.609055] ACPI: Interpreter enabled
[    4.611604] ACPI: PM: (supports S0 S5)
[    4.615596] ACPI: Using IOAPIC for interrupt routing
[    4.619813] HEST: Table parsing has been initialized.
[    4.623641] GHES: APEI firmware first mode is enabled by APEI bit.
[    4.627598] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    4.631596] PCI: Ignoring E820 reservations for host bridge windows
[    4.636195] ACPI: Enabled 2 GPEs in block 00 to 1F
[    4.640154] ACPI: \_SB_.S0D0.C000.SATA.P0SA: New power resource
[    4.643607] ACPI: \_SB_.S0D0.C000.SATA.P3SA: New power resource
[    4.647757] ACPI: \_SB_.S0D0.C000.SAT2.P0SA: New power resource
[    4.651606] ACPI: \_SB_.S0D0.C000.SAT2.P3SA: New power resource
[    4.659736] ACPI: \_SB_.S0D1.C011.SA11.P0SA: New power resource
[    4.663606] ACPI: \_SB_.S0D1.C011.SA11.P3SA: New power resource
[    4.667755] ACPI: \_SB_.S0D1.C011.SA12.P0SA: New power resource
[    4.671606] ACPI: \_SB_.S0D1.C011.SA12.P3SA: New power resource
[    4.676214] ACPI: \_SB_.PCI0.C021.SATA.P0SA: New power resource
[    4.679607] ACPI: \_SB_.PCI0.C021.SATA.P3SA: New power resource
[    4.683744] ACPI: \_SB_.PCI0.C021.SAT2.P0SA: New power resource
[    4.687606] ACPI: \_SB_.PCI0.C021.SAT2.P3SA: New power resource
[    4.704073] ACPI: PCI Root Bridge [S0D0] (domain 0000 [bus e0-ff])
[    4.707599] acpi ACPI0016:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    4.711597] acpi ACPI0016:00: _OSC: OS supports [CXL11PortRegAccess CXL20PortDevRegAccess CXLProtocolErrorReporting CXLNativeHot]
[    4.715933] acpi ACPI0016:00: _OSC: platform does not support [AER LTR]
[    4.720179] acpi ACPI0016:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability]
[    4.723596] acpi ACPI0016:00: _OSC: OS now controls [CXLMemErrorReporting]
[    4.727733] PCI host bridge to bus 0000:e0
[    4.731619] pci_bus 0000:e0: root bus resource [io  0xf000-0xffff window]
[    4.735596] pci_bus 0000:e0: root bus resource [mem 0xda000000-0xdc1fffff window]
[    4.739596] pci_bus 0000:e0: root bus resource [mem 0x18421000000-0x28420ffffff window]
[    4.743596] pci_bus 0000:e0: root bus resource [bus e0-ff]
[    4.747607] pci 0000:e0:00.0: [1022:153a] type 00 class 0x060000 conventional PCI endpoint
[    4.752503] pci 0000:e0:00.2: [1022:153b] type 00 class 0x080600 conventional PCI endpoint
[    4.755661] pci 0000:e0:00.3: [1022:153c] type 00 class 0x080700 PCIe Root Complex Event Collector
[    4.759666] pci 0000:e0:00.3: enabling Extended Tags
[    4.767656] pci 0000:e0:01.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    4.771636] pci 0000:e0:02.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    4.775634] pci 0000:e0:03.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    4.779634] pci 0000:e0:04.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    4.783634] pci 0000:e0:05.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    4.787636] pci 0000:e0:07.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    4.795600] pci 0000:e0:07.1: [1022:1555] type 01 class 0x060400 PCIe Root Port
[    4.799607] pci 0000:e0:07.1: PCI bridge to [bus e1]
[    4.803600] pci 0000:e0:07.1:   bridge window [mem 0xdc100000-0xdc1fffff]
[    4.807930] pci 0000:e0:07.1: enabling Extended Tags
[    4.815621] pci 0000:e0:07.1: PME# supported from D0 D3hot D3cold
[    4.819673] pci 0000:e0:07.2: [1022:1555] type 01 class 0x060400 PCIe Root Port
[    4.823607] pci 0000:e0:07.2: PCI bridge to [bus e2]
[    4.827599] pci 0000:e0:07.2:   bridge window [mem 0xdc000000-0xdc0fffff]
[    4.831618] pci 0000:e0:07.2: enabling Extended Tags
[    4.836474] pci 0000:e0:07.2: PME# supported from D0 D3hot D3cold
[    4.839707] pci 0000:e1:00.0: [1022:1556] type 00 class 0x130000 PCIe Endpoint
[    4.843618] pci 0000:e1:00.0: enabling Extended Tags
[    4.847686] pci 0000:e1:00.4: [1022:1557] type 00 class 0x0c0330 PCIe Endpoint
[    4.851614] pci 0000:e1:00.4: BAR 0 [mem 0xdc100000-0xdc1fffff 64bit]
[    4.855601] pci 0000:e1:00.4: enabling Extended Tags
[    4.859624] pci 0000:e1:00.4: PME# supported from D0 D3hot D3cold
[    4.863694] pci 0000:e0:07.1: PCI bridge to [bus e1]
[    4.867767] pci 0000:e2:00.0: [1022:7901] type 00 class 0x010601 PCIe Endpoint
[    4.871616] pci 0000:e2:00.0: BAR 5 [mem 0xdc001000-0xdc0017ff]
[    4.875599] pci 0000:e2:00.0: enabling Extended Tags
[    4.879632] pci 0000:e2:00.0: PME# supported from D3hot D3cold
[    4.883655] pci 0000:e2:00.1: [1022:7901] type 00 class 0x010601 PCIe Endpoint
[    4.887616] pci 0000:e2:00.1: BAR 5 [mem 0xdc000000-0xdc0007ff]
[    4.891601] pci 0000:e2:00.1: enabling Extended Tags
[    4.895623] pci 0000:e2:00.1: PME# supported from D3hot D3cold
[    4.900040] pci 0000:e0:07.2: PCI bridge to [bus e2]
[    4.904816] ACPI: PCI Root Bridge [S0D1] (domain 0000 [bus a0-bf])
[    4.907597] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    4.911681] acpi PNP0A08:00: _OSC: platform does not support [AER LTR]
[    4.915750] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability]
[    4.919749] PCI host bridge to bus 0000:a0
[    4.923618] pci_bus 0000:a0: root bus resource [io  0x03b0-0x03df window]
[    4.927596] pci_bus 0000:a0: root bus resource [io  0xb000-0xcfff window]
[    4.931596] pci_bus 0000:a0: root bus resource [mem 0x000a0000-0x000bffff window]
[    4.935596] pci_bus 0000:a0: root bus resource [mem 0xc8000000-0xcb5fffff window]
[    4.939596] pci_bus 0000:a0: root bus resource [mem 0x38481000000-0x48480ffffff window]
[    4.943596] pci_bus 0000:a0: root bus resource [bus a0-bf]
[    4.947601] pci 0000:a0:00.0: [1022:153a] type 00 class 0x060000 conventional PCI endpoint
[    4.951829] pci 0000:a0:00.2: [1022:153b] type 00 class 0x080600 conventional PCI endpoint
[    4.955655] pci 0000:a0:01.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    4.960084] pci 0000:a0:01.1: [1022:153e] type 01 class 0x060400 PCIe Root Port
[    4.963614] pci 0000:a0:01.1: PCI bridge to [bus a1]
[    4.969104] pci 0000:a0:01.1: PME# supported from D0 D3hot D3cold
[    4.972110] pci 0000:a0:01.2: [1022:153e] type 01 class 0x060400 PCIe Root Port
[    4.975614] pci 0000:a0:01.2: PCI bridge to [bus a2]
[    4.980416] pci 0000:a0:01.2: PME# supported from D0 D3hot D3cold
[    4.988901] pci 0000:a0:01.3: [1022:153e] type 01 class 0x060400 PCIe Root Port
[    4.991614] pci 0000:a0:01.3: PCI bridge to [bus a3]
[    4.999758] pci 0000:a0:01.3: PME# supported from D0 D3hot D3cold
[    5.007602] pci 0000:a0:01.4: [1022:153e] type 01 class 0x060400 PCIe Root Port
[    5.011614] pci 0000:a0:01.4: PCI bridge to [bus a4]
[    5.019695] pci 0000:a0:01.4: PME# supported from D0 D3hot D3cold
[    5.024077] pci 0000:a0:02.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    5.028335] pci 0000:a0:03.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    5.031663] pci 0000:a0:03.1: [1022:1554] type 01 class 0x060400 PCIe Root Port
[    5.035608] pci 0000:a0:03.1: PCI bridge to [bus a5]
[    5.039599] pci 0000:a0:03.1:   bridge window [mem 0xcb500000-0xcb5fffff]
[    5.047880] pci 0000:a0:03.1: PME# supported from D0 D3hot D3cold
[    5.056024] pci 0000:a0:03.4: [1022:1554] type 01 class 0x060400 PCIe Root Port
[    5.059608] pci 0000:a0:03.4: PCI bridge to [bus a6]
[    5.063604] pci 0000:a0:03.4:   bridge window [mem 0x48480f00000-0x48480ffffff 64bit pref]
[    5.071856] pci 0000:a0:03.4: PME# supported from D0 D3hot D3cold
[    5.079600] pci 0000:a0:03.5: [1022:1554] type 01 class 0x060400 PCIe Root Port
[    5.083608] pci 0000:a0:03.5: PCI bridge to [bus a7-a8]
[    5.087598] pci 0000:a0:03.5:   bridge window [io  0xc000-0xcfff]
[    5.091597] pci 0000:a0:03.5:   bridge window [mem 0xca000000-0xcb1fffff]
[    5.095881] pci 0000:a0:03.5: PME# supported from D0 D3hot D3cold
[    5.101215] pci 0000:a0:04.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    5.103663] pci 0000:a0:05.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    5.107636] pci 0000:a0:07.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    5.111655] pci 0000:a0:07.1: [1022:1555] type 01 class 0x060400 PCIe Root Port
[    5.115607] pci 0000:a0:07.1: PCI bridge to [bus a9]
[    5.119599] pci 0000:a0:07.1:   bridge window [mem 0xcb300000-0xcb4fffff]
[    5.123878] pci 0000:a0:07.1: enabling Extended Tags
[    5.128580] pci 0000:a0:07.1: PME# supported from D0 D3hot D3cold
[    5.131704] pci 0000:a0:01.1: PCI bridge to [bus a1]
[    5.136155] pci 0000:a0:01.2: PCI bridge to [bus a2]
[    5.140555] pci 0000:a0:01.3: PCI bridge to [bus a3]
[    5.144554] pci 0000:a0:01.4: PCI bridge to [bus a4]
[    5.148563] pci 0000:a5:00.0: [144d:a80a] type 00 class 0x010802 PCIe Endpoint
[    5.151632] pci 0000:a5:00.0: BAR 0 [mem 0xcb500000-0xcb503fff 64bit]
[    5.155790] pci 0000:a5:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:a0:03.1 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
[    5.159703] pci 0000:a0:03.1: PCI bridge to [bus a5]
[    5.164512] pci 0000:a6:00.0: [14e4:165f] type 00 class 0x020000 PCIe Endpoint
[    5.167637] pci 0000:a6:00.0: BAR 0 [mem 0x48480f20000-0x48480f2ffff 64bit pref]
[    5.171598] pci 0000:a6:00.0: BAR 2 [mem 0x48480f10000-0x48480f1ffff 64bit pref]
[    5.175598] pci 0000:a6:00.0: BAR 4 [mem 0x48480f00000-0x48480f0ffff 64bit pref]
[    5.179716] pci 0000:a6:00.0: PME# supported from D0 D3hot D3cold
[    5.183642] pci 0000:a6:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:a0:03.4 (capable of 8.000 Gb/s with 5.0 GT/s PCIe x2 link)
[    5.187701] pci 0000:a0:03.4: PCI bridge to [bus a6]
[    5.192227] pci 0000:a7:00.0: [1a03:1150] type 01 class 0x060400 PCIe to PCI/PCI-X bridge
[    5.195628] pci 0000:a7:00.0: PCI bridge to [bus a8]
[    5.199603] pci 0000:a7:00.0:   bridge window [io  0xc000-0xcfff]
[    5.203599] pci 0000:a7:00.0:   bridge window [mem 0xca000000-0xcb1fffff]
[    5.207622] pci 0000:a7:00.0: enabling Extended Tags
[    5.211729] pci 0000:a7:00.0: supports D1 D2
[    5.215596] pci 0000:a7:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.220261] pci 0000:a0:03.5: PCI bridge to [bus a7-a8]
[    5.223640] pci_bus 0000:a8: extended config space not accessible
[    5.227610] pci 0000:a8:00.0: [1a03:2000] type 00 class 0x030000 conventional PCI endpoint
[    5.231649] pci 0000:a8:00.0: BAR 0 [mem 0xca000000-0xcaffffff]
[    5.235597] pci 0000:a8:00.0: BAR 1 [mem 0xcb140000-0xcb17ffff]
[    5.239597] pci 0000:a8:00.0: BAR 2 [io  0xc000-0xc07f]
[    5.243636] pci 0000:a8:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    5.247631] pci 0000:a8:00.0: supports D1 D2
[    5.251596] pci 0000:a8:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.255657] pci 0000:a8:01.0: [1a03:2402] type 00 class 0xff0000 conventional PCI endpoint
[    5.259646] pci 0000:a8:01.0: BAR 0 [mem 0xcb000000-0xcb0fffff]
[    5.263597] pci 0000:a8:01.0: BAR 1 [mem 0xcb100000-0xcb13ffff]
[    5.267663] pci 0000:a8:01.0: supports D1 D2
[    5.271596] pci 0000:a8:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.275688] pci 0000:a7:00.0: PCI bridge to [bus a8]
[    5.280391] pci 0000:a9:00.0: [1022:1556] type 00 class 0x130000 PCIe Endpoint
[    5.283618] pci 0000:a9:00.0: enabling Extended Tags
[    5.287687] pci 0000:a9:00.5: [1022:156e] type 00 class 0x108000 PCIe Endpoint
[    5.291614] pci 0000:a9:00.5: BAR 2 [mem 0xcb300000-0xcb3fffff]
[    5.295597] pci 0000:a9:00.5: BAR 5 [mem 0xcb400000-0xcb401fff]
[    5.299599] pci 0000:a9:00.5: enabling Extended Tags
[    5.304132] pci 0000:a0:07.1: PCI bridge to [bus a9]
[    5.309026] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
[    5.311597] acpi ACPI0016:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    5.315596] acpi ACPI0016:01: _OSC: OS supports [CXL11PortRegAccess CXL20PortDevRegAccess CXLProtocolErrorReporting CXLNativeHot]
[    5.319932] acpi ACPI0016:01: _OSC: platform does not support [AER LTR]
[    5.324214] acpi ACPI0016:01: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability]
[    5.327596] acpi ACPI0016:01: _OSC: OS now controls [CXLMemErrorReporting]
[    5.331781] PCI host bridge to bus 0000:00
[    5.335618] pci_bus 0000:00: root bus resource [io  0x0000-0x02e7 window]
[    5.339596] pci_bus 0000:00: root bus resource [io  0x0300-0x03af window]
[    5.343596] pci_bus 0000:00: root bus resource [io  0x0400-0x0cf7 window]
[    5.347596] pci_bus 0000:00: root bus resource [io  0x1000-0x2fff window]
[    5.351596] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    5.355596] pci_bus 0000:00: root bus resource [mem 0xee000000-0xefffffff window]
[    5.359596] pci_bus 0000:00: root bus resource [mem 0x584e1000000-0x684e0ffffff window]
[    5.363596] pci_bus 0000:00: root bus resource [bus 00-1f]
[    5.367601] pci 0000:00:00.0: [1022:153a] type 00 class 0x060000 conventional PCI endpoint
[    5.371796] pci 0000:00:00.2: [1022:153b] type 00 class 0x080600 conventional PCI endpoint
[    5.375657] pci 0000:00:00.3: [1022:153c] type 00 class 0x080700 PCIe Root Complex Event Collector
[    5.379666] pci 0000:00:00.3: enabling Extended Tags
[    5.387725] pci 0000:00:01.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    5.391640] pci 0000:00:02.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    5.395641] pci 0000:00:03.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    5.399640] pci 0000:00:04.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    5.403641] pci 0000:00:05.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    5.407643] pci 0000:00:07.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    5.415600] pci 0000:00:07.1: [1022:1555] type 01 class 0x060400 PCIe Root Port
[    5.419607] pci 0000:00:07.1: PCI bridge to [bus 01]
[    5.423621] pci 0000:00:07.1: enabling Extended Tags
[    5.427813] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    5.431671] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[    5.435667] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[    5.439685] pci 0000:00:18.0: [1022:12c0] type 00 class 0x060000 conventional PCI endpoint
[    5.443621] pci 0000:00:18.1: [1022:12c1] type 00 class 0x060000 conventional PCI endpoint
[    5.447622] pci 0000:00:18.2: [1022:12c2] type 00 class 0x060000 conventional PCI endpoint
[    5.451621] pci 0000:00:18.3: [1022:12c3] type 00 class 0x060000 conventional PCI endpoint
[    5.455621] pci 0000:00:18.4: [1022:12c4] type 00 class 0x060000 conventional PCI endpoint
[    5.459622] pci 0000:00:18.5: [1022:12c5] type 00 class 0x060000 conventional PCI endpoint
[    5.463623] pci 0000:00:18.6: [1022:12c6] type 00 class 0x060000 conventional PCI endpoint
[    5.467621] pci 0000:00:18.7: [1022:12c7] type 00 class 0x060000 conventional PCI endpoint
[    5.471678] pci 0000:01:00.0: [1022:1556] type 00 class 0x130000 PCIe Endpoint
[    5.475618] pci 0000:01:00.0: enabling Extended Tags
[    5.479728] pci 0000:00:07.1: PCI bridge to [bus 01]
[    5.484813] ACPI: PCI Root Bridge [S0D3] (domain 0000 [bus 40-5f])
[    5.487601] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    5.491677] acpi PNP0A08:01: _OSC: platform does not support [AER LTR]
[    5.495748] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability]
[    5.499713] PCI host bridge to bus 0000:40
[    5.503618] pci_bus 0000:40: root bus resource [io  0x5000-0x6fff window]
[    5.507596] pci_bus 0000:40: root bus resource [mem 0xb6000000-0xb8dfffff window]
[    5.511596] pci_bus 0000:40: root bus resource [mem 0x78541000000-0x88540ffffff window]
[    5.515596] pci_bus 0000:40: root bus resource [bus 40-5f]
[    5.519601] pci 0000:40:00.0: [1022:153a] type 00 class 0x060000 conventional PCI endpoint
[    5.523825] pci 0000:40:00.2: [1022:153b] type 00 class 0x080600 conventional PCI endpoint
[    5.527660] pci 0000:40:01.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    5.531995] pci 0000:40:01.1: [1022:153e] type 01 class 0x060400 PCIe Root Port
[    5.535608] pci 0000:40:01.1: PCI bridge to [bus 41]
[    5.539599] pci 0000:40:01.1:   bridge window [mem 0xb8900000-0xb8bfffff]
[    5.544205] pci 0000:40:01.1: PME# supported from D0 D3hot D3cold
[    5.551600] pci 0000:40:01.2: [1022:153e] type 01 class 0x060400 PCIe Root Port
[    5.555608] pci 0000:40:01.2: PCI bridge to [bus 42]
[    5.559599] pci 0000:40:01.2:   bridge window [mem 0xb8600000-0xb88fffff]
[    5.564207] pci 0000:40:01.2: PME# supported from D0 D3hot D3cold
[    5.569182] pci 0000:40:01.3: [1022:153e] type 01 class 0x060400 PCIe Root Port
[    5.571608] pci 0000:40:01.3: PCI bridge to [bus 43]
[    5.575599] pci 0000:40:01.3:   bridge window [mem 0xb8300000-0xb85fffff]
[    5.583873] pci 0000:40:01.3: PME# supported from D0 D3hot D3cold
[    5.591600] pci 0000:40:01.4: [1022:153e] type 01 class 0x060400 PCIe Root Port
[    5.595608] pci 0000:40:01.4: PCI bridge to [bus 44]
[    5.599599] pci 0000:40:01.4:   bridge window [mem 0xb8000000-0xb82fffff]
[    5.604209] pci 0000:40:01.4: PME# supported from D0 D3hot D3cold
[    5.608056] pci 0000:40:02.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    5.612179] pci 0000:40:03.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    5.615637] pci 0000:40:04.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    5.620564] pci 0000:40:05.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    5.623637] pci 0000:40:07.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    5.628543] pci 0000:40:07.1: [1022:1555] type 01 class 0x060400 PCIe Root Port
[    5.631607] pci 0000:40:07.1: PCI bridge to [bus 45]
[    5.635599] pci 0000:40:07.1:   bridge window [mem 0xb8d00000-0xb8dfffff]
[    5.643596] pci 0000:40:07.1: enabling Extended Tags
[    5.648580] pci 0000:40:07.1: PME# supported from D0 D3hot D3cold
[    5.651671] pci 0000:40:07.2: [1022:1555] type 01 class 0x060400 PCIe Root Port
[    5.655607] pci 0000:40:07.2: PCI bridge to [bus 46]
[    5.659599] pci 0000:40:07.2:   bridge window [mem 0xb8c00000-0xb8cfffff]
[    5.663619] pci 0000:40:07.2: enabling Extended Tags
[    5.668495] pci 0000:40:07.2: PME# supported from D0 D3hot D3cold
[    5.671697] pci 0000:41:00.0: [144d:a826] type 00 class 0x010802 PCIe Endpoint
[    5.675621] pci 0000:41:00.0: BAR 0 [mem 0xb8b00000-0xb8b07fff 64bit]
[    5.679719] pci 0000:41:00.0: VF BAR 0 [mem 0xb8900000-0xb8907fff 64bit]
[    5.683596] pci 0000:41:00.0: VF BAR 0 [mem 0xb8900000-0xb8afffff 64bit]: contains BAR 0 for 64 VFs
[    5.688882] pci 0000:40:01.1: PCI bridge to [bus 41]
[    5.695682] pci 0000:42:00.0: [144d:a826] type 00 class 0x010802 PCIe Endpoint
[    5.703622] pci 0000:42:00.0: BAR 0 [mem 0xb8800000-0xb8807fff 64bit]
[    5.711724] pci 0000:42:00.0: VF BAR 0 [mem 0xb8600000-0xb8607fff 64bit]
[    5.715597] pci 0000:42:00.0: VF BAR 0 [mem 0xb8600000-0xb87fffff 64bit]: contains BAR 0 for 64 VFs
[    5.727817] pci 0000:40:01.2: PCI bridge to [bus 42]
[    5.731693] pci 0000:43:00.0: [144d:a826] type 00 class 0x010802 PCIe Endpoint
[    5.739621] pci 0000:43:00.0: BAR 0 [mem 0xb8500000-0xb8507fff 64bit]
[    5.747715] pci 0000:43:00.0: VF BAR 0 [mem 0xb8300000-0xb8307fff 64bit]
[    5.755597] pci 0000:43:00.0: VF BAR 0 [mem 0xb8300000-0xb84fffff 64bit]: contains BAR 0 for 64 VFs
[    5.767840] pci 0000:40:01.3: PCI bridge to [bus 43]
[    5.771764] pci 0000:44:00.0: [144d:a826] type 00 class 0x010802 PCIe Endpoint
[    5.779622] pci 0000:44:00.0: BAR 0 [mem 0xb8200000-0xb8207fff 64bit]
[    5.787714] pci 0000:44:00.0: VF BAR 0 [mem 0xb8000000-0xb8007fff 64bit]
[    5.795596] pci 0000:44:00.0: VF BAR 0 [mem 0xb8000000-0xb81fffff 64bit]: contains BAR 0 for 64 VFs
[    5.803840] pci 0000:40:01.4: PCI bridge to [bus 44]
[    5.811768] pci 0000:45:00.0: [1022:1556] type 00 class 0x130000 PCIe Endpoint
[    5.819619] pci 0000:45:00.0: enabling Extended Tags
[    5.823688] pci 0000:45:00.4: [1022:1557] type 00 class 0x0c0330 PCIe Endpoint
[    5.831614] pci 0000:45:00.4: BAR 0 [mem 0xb8d00000-0xb8dfffff 64bit]
[    5.839602] pci 0000:45:00.4: enabling Extended Tags
[    5.843625] pci 0000:45:00.4: PME# supported from D0 D3hot D3cold
[    5.851693] pci 0000:40:07.1: PCI bridge to [bus 45]
[    5.860155] pci 0000:46:00.0: [1022:7901] type 00 class 0x010601 PCIe Endpoint
[    5.867616] pci 0000:46:00.0: BAR 5 [mem 0xb8c01000-0xb8c017ff]
[    5.871600] pci 0000:46:00.0: enabling Extended Tags
[    5.879631] pci 0000:46:00.0: PME# supported from D3hot D3cold
[    5.883648] pci 0000:46:00.1: [1022:7901] type 00 class 0x010601 PCIe Endpoint
[    5.891616] pci 0000:46:00.1: BAR 5 [mem 0xb8c00000-0xb8c007ff]
[    5.899600] pci 0000:46:00.1: enabling Extended Tags
[    5.907623] pci 0000:46:00.1: PME# supported from D3hot D3cold
[    5.912060] pci 0000:40:07.2: PCI bridge to [bus 46]
[    5.920777] ACPI: PCI Root Bridge [S0D4] (domain 0000 [bus 80-9f])
[    5.927597] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    5.935677] acpi PNP0A08:02: _OSC: platform does not support [AER LTR]
[    5.943748] acpi PNP0A08:02: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability]
[    5.951705] PCI host bridge to bus 0000:80
[    5.959619] pci_bus 0000:80: root bus resource [io  0x9000-0xafff window]
[    5.967596] pci_bus 0000:80: root bus resource [mem 0xc0000000-0xc1ffffff window]
[    5.975596] pci_bus 0000:80: root bus resource [mem 0x48481000000-0x58480ffffff window]
[    5.983596] pci_bus 0000:80: root bus resource [bus 80-9f]
[    5.987600] pci 0000:80:00.0: [1022:153a] type 00 class 0x060000 conventional PCI endpoint
[    6.000411] pci 0000:80:01.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    6.007663] pci 0000:80:01.1: [1022:153e] type 01 class 0x060400 PCIe Root Port
[    6.015610] pci 0000:80:01.1: PCI bridge to [bus 81]
[    6.024492] pci 0000:80:01.1: PME# supported from D0 D3hot D3cold
[    6.031600] pci 0000:80:01.2: [1022:153e] type 01 class 0x060400 PCIe Root Port
[    6.039610] pci 0000:80:01.2: PCI bridge to [bus 82]
[    6.045089] pci 0000:80:01.2: PME# supported from D0 D3hot D3cold
[    6.052087] pci 0000:80:01.3: [1022:153e] type 01 class 0x060400 PCIe Root Port
[    6.063609] pci 0000:80:01.3: PCI bridge to [bus 83]
[    6.068450] pci 0000:80:01.3: PME# supported from D0 D3hot D3cold
[    6.077000] pci 0000:80:01.4: [1022:153e] type 01 class 0x060400 PCIe Root Port
[    6.083610] pci 0000:80:01.4: PCI bridge to [bus 84]
[    6.091648] pci 0000:80:01.4: PME# supported from D0 D3hot D3cold
[    6.100064] pci 0000:80:02.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    6.108379] pci 0000:80:01.1: PCI bridge to [bus 81]
[    6.115634] pci 0000:80:01.2: PCI bridge to [bus 82]
[    6.120554] pci 0000:80:01.3: PCI bridge to [bus 83]
[    6.128555] pci 0000:80:01.4: PCI bridge to [bus 84]
[    6.136649] ACPI: PCI Root Bridge [S0D5] (domain 0000 [bus c0-df])
[    6.143598] acpi ACPI0016:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    6.151596] acpi ACPI0016:02: _OSC: OS supports [CXL11PortRegAccess CXL20PortDevRegAccess CXLProtocolErrorReporting CXLNativeHot]
[    6.163929] acpi ACPI0016:02: _OSC: platform does not support [AER LTR]
[    6.172209] acpi ACPI0016:02: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability]
[    6.183597] acpi ACPI0016:02: _OSC: OS now controls [CXLMemErrorReporting]
[    6.191700] PCI host bridge to bus 0000:c0
[    6.195618] pci_bus 0000:c0: root bus resource [io  0xd000-0xefff window]
[    6.203597] pci_bus 0000:c0: root bus resource [mem 0xd2000000-0xd3ffffff window]
[    6.211596] pci_bus 0000:c0: root bus resource [mem 0x28421000000-0x38420ffffff window]
[    6.219596] pci_bus 0000:c0: root bus resource [bus c0-df]
[    6.227601] pci 0000:c0:00.0: [1022:153a] type 00 class 0x060000 conventional PCI endpoint
[    6.236384] pci 0000:c0:00.3: [1022:153c] type 00 class 0x080700 PCIe Root Complex Event Collector
[    6.247596] pci 0000:c0:00.3: enabling Extended Tags
[    6.252687] pci 0000:c0:01.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    6.263637] pci 0000:c0:02.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    6.271701] ACPI: PCI Root Bridge [S0D6] (domain 0000 [bus 60-7f])
[    6.279596] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    6.291675] acpi PNP0A08:03: _OSC: platform does not support [AER LTR]
[    6.295749] acpi PNP0A08:03: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability]
[    6.307699] PCI host bridge to bus 0000:60
[    6.311618] pci_bus 0000:60: root bus resource [io  0x7000-0x8fff window]
[    6.319596] pci_bus 0000:60: root bus resource [mem 0xb0000000-0xb2bfffff window]
[    6.327597] pci_bus 0000:60: root bus resource [mem 0x88541000000-0x98540ffffff window]
[    6.335596] pci_bus 0000:60: root bus resource [bus 60-7f]
[    6.343600] pci 0000:60:00.0: [1022:153a] type 00 class 0x060000 conventional PCI endpoint
[    6.351801] pci 0000:60:01.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    6.360408] pci 0000:60:01.1: [1022:153e] type 01 class 0x060400 PCIe Root Port
[    6.371607] pci 0000:60:01.1: PCI bridge to [bus 61]
[    6.375599] pci 0000:60:01.1:   bridge window [mem 0xb2900000-0xb2bfffff]
[    6.383867] pci 0000:60:01.1: PME# supported from D0 D3hot D3cold
[    6.391600] pci 0000:60:01.2: [1022:153e] type 01 class 0x060400 PCIe Root Port
[    6.399607] pci 0000:60:01.2: PCI bridge to [bus 62]
[    6.407599] pci 0000:60:01.2:   bridge window [mem 0xb2600000-0xb28fffff]
[    6.416211] pci 0000:60:01.2: PME# supported from D0 D3hot D3cold
[    6.421204] pci 0000:60:01.3: [1022:153e] type 01 class 0x060400 PCIe Root Port
[    6.431607] pci 0000:60:01.3: PCI bridge to [bus 63]
[    6.435599] pci 0000:60:01.3:   bridge window [mem 0xb2300000-0xb25fffff]
[    6.444208] pci 0000:60:01.3: PME# supported from D0 D3hot D3cold
[    6.453098] pci 0000:60:01.4: [1022:153e] type 01 class 0x060400 PCIe Root Port
[    6.459607] pci 0000:60:01.4: PCI bridge to [bus 64]
[    6.467599] pci 0000:60:01.4:   bridge window [mem 0xb2000000-0xb22fffff]
[    6.476216] pci 0000:60:01.4: PME# supported from D0 D3hot D3cold
[    6.484054] pci 0000:60:02.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    6.491622] pci 0000:61:00.0: [144d:a826] type 00 class 0x010802 PCIe Endpoint
[    6.499622] pci 0000:61:00.0: BAR 0 [mem 0xb2b00000-0xb2b07fff 64bit]
[    6.507722] pci 0000:61:00.0: VF BAR 0 [mem 0xb2900000-0xb2907fff 64bit]
[    6.515597] pci 0000:61:00.0: VF BAR 0 [mem 0xb2900000-0xb2afffff 64bit]: contains BAR 0 for 64 VFs
[    6.523847] pci 0000:60:01.1: PCI bridge to [bus 61]
[    6.531778] pci 0000:62:00.0: [144d:a826] type 00 class 0x010802 PCIe Endpoint
[    6.539622] pci 0000:62:00.0: BAR 0 [mem 0xb2800000-0xb2807fff 64bit]
[    6.547720] pci 0000:62:00.0: VF BAR 0 [mem 0xb2600000-0xb2607fff 64bit]
[    6.555597] pci 0000:62:00.0: VF BAR 0 [mem 0xb2600000-0xb27fffff 64bit]: contains BAR 0 for 64 VFs
[    6.563847] pci 0000:60:01.2: PCI bridge to [bus 62]
[    6.567757] pci 0000:63:00.0: [144d:a826] type 00 class 0x010802 PCIe Endpoint
[    6.579623] pci 0000:63:00.0: BAR 0 [mem 0xb2500000-0xb2507fff 64bit]
[    6.583719] pci 0000:63:00.0: VF BAR 0 [mem 0xb2300000-0xb2307fff 64bit]
[    6.591596] pci 0000:63:00.0: VF BAR 0 [mem 0xb2300000-0xb24fffff 64bit]: contains BAR 0 for 64 VFs
[    6.603845] pci 0000:60:01.3: PCI bridge to [bus 63]
[    6.607753] pci 0000:64:00.0: [144d:a826] type 00 class 0x010802 PCIe Endpoint
[    6.615622] pci 0000:64:00.0: BAR 0 [mem 0xb2200000-0xb2207fff 64bit]
[    6.623720] pci 0000:64:00.0: VF BAR 0 [mem 0xb2000000-0xb2007fff 64bit]
[    6.631596] pci 0000:64:00.0: VF BAR 0 [mem 0xb2000000-0xb21fffff 64bit]: contains BAR 0 for 64 VFs
[    6.639847] pci 0000:60:01.4: PCI bridge to [bus 64]
[    6.647775] ACPI: PCI Root Bridge [S0D7] (domain 0000 [bus 20-3f])
[    6.655597] acpi ACPI0016:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    6.663596] acpi ACPI0016:03: _OSC: OS supports [CXL11PortRegAccess CXL20PortDevRegAccess CXLProtocolErrorReporting CXLNativeHot]
[    6.679922] acpi ACPI0016:03: _OSC: platform does not support [AER LTR]
[    6.684215] acpi ACPI0016:03: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability]
[    6.695596] acpi ACPI0016:03: _OSC: OS now controls [CXLMemErrorReporting]
[    6.703702] PCI host bridge to bus 0000:20
[    6.707618] pci_bus 0000:20: root bus resource [io  0x3000-0x4fff window]
[    6.715596] pci_bus 0000:20: root bus resource [mem 0xba000000-0xbbffffff window]
[    6.723596] pci_bus 0000:20: root bus resource [mem 0x684e1000000-0x784e0ffffff window]
[    6.731596] pci_bus 0000:20: root bus resource [bus 20-3f]
[    6.739601] pci 0000:20:00.0: [1022:153a] type 00 class 0x060000 conventional PCI endpoint
[    6.748376] pci 0000:20:00.3: [1022:153c] type 00 class 0x080700 PCIe Root Complex Event Collector
[    6.759596] pci 0000:20:00.3: enabling Extended Tags
[    6.764683] pci 0000:20:01.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    6.775638] pci 0000:20:02.0: [1022:153d] type 00 class 0x060000 conventional PCI endpoint
[    6.783734] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    6.791623] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    6.799618] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    6.803625] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    6.811622] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    6.819617] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    6.823617] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    6.831617] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    6.839730] acpi/hmat: Memory Flags:0001 Processor Domain:0 Memory Domain:0
[    6.847674] iommu: Default domain type: Translated
[    6.851597] iommu: DMA domain TLB invalidation policy: lazy mode
[    6.859708] SCSI subsystem initialized
[    6.863619] ACPI: bus type USB registered
[    6.867603] usbcore: registered new interface driver usbfs
[    6.875599] usbcore: registered new interface driver hub
[    6.879615] usbcore: registered new device driver usb
[    6.888499] i2c_designware AMDI0010:00: Unknown Synopsys component type: 0xffffffff
[    6.899597] i2c_designware AMDI0010:01: Unknown Synopsys component type: 0xffffffff
[    6.912115] i2c_designware AMDI0010:02: Unknown Synopsys component type: 0xffffffff
[    6.917884] i2c_designware AMDI0010:03: Unknown Synopsys component type: 0xffffffff
[    6.925165] pps_core: LinuxPPS API ver. 1 registered
[    6.931597] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    6.939602] PTP clock support registered
[    6.943651] EDAC MC: Ver: 3.0.0
[    6.947745] efivars: Registered efivars operations
[    6.951822] NetLabel: Initializing
[    6.955596] NetLabel:  domain hash size = 128
[    6.959596] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    6.963613] NetLabel:  unlabeled traffic allowed by default
[    6.967648] mctp: management component transport protocol core
[    6.971596] NET: Registered PF_MCTP protocol family
[    6.975611] PCI: Using ACPI for IRQ routing
[    6.985433] pci 0000:a8:00.0: vgaarb: setting as boot VGA device
[    6.987595] pci 0000:a8:00.0: vgaarb: bridge control possible
[    6.987595] pci 0000:a8:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    6.987603] vgaarb: loaded
[    6.990616] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    6.991597] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    7.000887] clocksource: Switched to clocksource tsc-early
[    7.006354] VFS: Disk quotas dquot_6.6.0
[    7.010735] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    7.018522] AppArmor: AppArmor Filesystem Enabled
[    7.023783] pnp: PnP ACPI init
[    7.027546] system 00:00: [mem 0x3ffb00000000-0x3ffb0fffffff] has been reserved
[    7.036000] system 00:02: [io  0x0a00-0x0a3f] has been reserved
[    7.042601] system 00:02: [io  0x0a40-0x0a5f] has been reserved
[    7.049204] system 00:02: [io  0x0a60-0x0a6f] has been reserved
[    7.055806] system 00:02: [io  0x0a70-0x0a7f] has been reserved
[    7.062409] system 00:02: [io  0x0a80-0x0a8f] has been reserved
[    7.069302] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    7.075905] system 00:03: [io  0x040b] has been reserved
[    7.081828] system 00:03: [io  0x04d6] has been reserved
[    7.087753] system 00:03: [io  0x0c00-0x0c01] has been reserved
[    7.094355] system 00:03: [io  0x0c14] has been reserved
[    7.100277] system 00:03: [io  0x0c50-0x0c51] has been reserved
[    7.106878] system 00:03: [io  0x0c52] has been reserved
[    7.112801] system 00:03: [io  0x0c6c] has been reserved
[    7.118723] system 00:03: [io  0x0c6f] has been reserved
[    7.124646] system 00:03: [io  0x0cd0-0x0cd1] has been reserved
[    7.131247] system 00:03: [io  0x0cd2-0x0cd3] has been reserved
[    7.137839] system 00:03: [io  0x0cd4-0x0cd5] has been reserved
[    7.144440] system 00:03: [io  0x0cd6-0x0cd7] has been reserved
[    7.151042] system 00:03: [io  0x0cd8-0x0cdf] has been reserved
[    7.157642] system 00:03: [io  0x0800-0x089f] has been reserved
[    7.164234] system 00:03: [io  0x0b00-0x0b0f] has been reserved
[    7.170836] system 00:03: [io  0x0b20-0x0b3f] has been reserved
[    7.177437] system 00:03: [io  0x0900-0x090f] has been reserved
[    7.184038] system 00:03: [io  0x0910-0x091f] has been reserved
[    7.190631] system 00:03: [io  0xfe00-0xfefe] has been reserved
[    7.197231] system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    7.204608] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[    7.211986] system 00:03: [mem 0xfed80000-0xfed811ff] has been reserved
[    7.219363] system 00:03: [mem 0xfed81300-0xfed814ff] has been reserved
[    7.226740] system 00:03: [mem 0xfed81900-0xfed8ffff] has been reserved
[    7.234117] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
[    7.241494] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[    7.249604] pnp: PnP ACPI: found 6 devices
[    7.259692] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    7.269641] NET: Registered PF_INET protocol family
[    7.275179] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    7.285283] tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    7.295150] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    7.303959] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    7.313360] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    7.321656] TCP: Hash tables configured (established 524288 bind 65536)
[    7.329285] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
[    7.338044] UDP hash table entries: 65536 (order: 10, 4194304 bytes, linear)
[    7.346195] UDP-Lite hash table entries: 65536 (order: 10, 4194304 bytes, linear)
[    7.354790] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    7.361103] NET: Registered PF_XDP protocol family
[    7.366452] pci 0000:e0:07.1: PCI bridge to [bus e1]
[    7.371979] pci 0000:e0:07.1:   bridge window [mem 0xdc100000-0xdc1fffff]
[    7.379567] pci 0000:e0:07.2: PCI bridge to [bus e2]
[    7.385101] pci 0000:e0:07.2:   bridge window [mem 0xdc000000-0xdc0fffff]
[    7.392692] pci_bus 0000:e0: resource 4 [io  0xf000-0xffff window]
[    7.399584] pci_bus 0000:e0: resource 5 [mem 0xda000000-0xdc1fffff window]
[    7.407251] pci_bus 0000:e0: resource 6 [mem 0x18421000000-0x28420ffffff window]
[    7.415491] pci_bus 0000:e1: resource 1 [mem 0xdc100000-0xdc1fffff]
[    7.422472] pci_bus 0000:e2: resource 1 [mem 0xdc000000-0xdc0fffff]
[    7.429477] pci 0000:a0:01.1: bridge window [io  0x1000-0x0fff] to [bus a1] add_size 1000
[    7.438601] pci 0000:a0:01.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus a1] add_size 200000 add_align 100000
[    7.451408] pci 0000:a0:01.1: bridge window [mem 0x00100000-0x000fffff] to [bus a1] add_size 200000 add_align 100000
[    7.463149] pci 0000:a0:01.2: bridge window [io  0x1000-0x0fff] to [bus a2] add_size 1000
[    7.472271] pci 0000:a0:01.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus a2] add_size 200000 add_align 100000
[    7.485077] pci 0000:a0:01.2: bridge window [mem 0x00100000-0x000fffff] to [bus a2] add_size 200000 add_align 100000
[    7.496819] pci 0000:a0:01.3: bridge window [io  0x1000-0x0fff] to [bus a3] add_size 1000
[    7.505940] pci 0000:a0:01.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus a3] add_size 200000 add_align 100000
[    7.518747] pci 0000:a0:01.3: bridge window [mem 0x00100000-0x000fffff] to [bus a3] add_size 200000 add_align 100000
[    7.530487] pci 0000:a0:01.4: bridge window [io  0x1000-0x0fff] to [bus a4] add_size 1000
[    7.539609] pci 0000:a0:01.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus a4] add_size 200000 add_align 100000
[    7.552416] pci 0000:a0:01.4: bridge window [mem 0x00100000-0x000fffff] to [bus a4] add_size 200000 add_align 100000
[    7.564153] pci 0000:a0:01.1: bridge window [mem 0xc8000000-0xc81fffff]: assigned
[    7.572500] pci 0000:a0:01.1: bridge window [mem 0x38481000000-0x384811fffff 64bit pref]: assigned
[    7.582498] pci 0000:a0:01.2: bridge window [mem 0xc8200000-0xc83fffff]: assigned
[    7.590845] pci 0000:a0:01.2: bridge window [mem 0x38481200000-0x384813fffff 64bit pref]: assigned
[    7.600842] pci 0000:a0:01.3: bridge window [mem 0xc8400000-0xc85fffff]: assigned
[    7.609188] pci 0000:a0:01.3: bridge window [mem 0x38481400000-0x384815fffff 64bit pref]: assigned
[    7.619184] pci 0000:a0:01.4: bridge window [mem 0xc8600000-0xc87fffff]: assigned
[    7.627531] pci 0000:a0:01.4: bridge window [mem 0x38481600000-0x384817fffff 64bit pref]: assigned
[    7.637524] pci 0000:a0:01.1: bridge window [io  0xb000-0xbfff]: assigned
[    7.645096] pci 0000:a0:01.2: bridge window [io  size 0x1000]: can't assign; no space
[    7.653830] pci 0000:a0:01.2: bridge window [io  size 0x1000]: failed to assign
[    7.661982] pci 0000:a0:01.3: bridge window [io  size 0x1000]: can't assign; no space
[    7.670717] pci 0000:a0:01.3: bridge window [io  size 0x1000]: failed to assign
[    7.678869] pci 0000:a0:01.4: bridge window [io  size 0x1000]: can't assign; no space
[    7.687603] pci 0000:a0:01.4: bridge window [io  size 0x1000]: failed to assign
[    7.695756] pci 0000:a0:01.4: bridge window [io  0xb000-0xbfff]: assigned
[    7.703329] pci 0000:a0:01.3: bridge window [io  size 0x1000]: can't assign; no space
[    7.712063] pci 0000:a0:01.3: bridge window [io  size 0x1000]: failed to assign
[    7.720215] pci 0000:a0:01.2: bridge window [io  size 0x1000]: can't assign; no space
[    7.728941] pci 0000:a0:01.2: bridge window [io  size 0x1000]: failed to assign
[    7.737094] pci 0000:a0:01.1: bridge window [io  size 0x1000]: can't assign; no space
[    7.745829] pci 0000:a0:01.1: bridge window [io  size 0x1000]: failed to assign
[    7.753981] pci 0000:a0:01.1: PCI bridge to [bus a1]
[    7.759516] pci 0000:a0:01.1:   bridge window [mem 0xc8000000-0xc81fffff]
[    7.767087] pci 0000:a0:01.1:   bridge window [mem 0x38481000000-0x384811fffff 64bit pref]
[    7.776694] pci 0000:a0:01.2: PCI bridge to [bus a2]
[    7.782232] pci 0000:a0:01.2:   bridge window [mem 0xc8200000-0xc83fffff]
[    7.789805] pci 0000:a0:01.2:   bridge window [mem 0x38481200000-0x384813fffff 64bit pref]
[    7.799044] pci 0000:a0:01.3: PCI bridge to [bus a3]
[    7.804582] pci 0000:a0:01.3:   bridge window [mem 0xc8400000-0xc85fffff]
[    7.812157] pci 0000:a0:01.3:   bridge window [mem 0x38481400000-0x384815fffff 64bit pref]
[    7.822075] pci 0000:a0:01.4: PCI bridge to [bus a4]
[    7.827610] pci 0000:a0:01.4:   bridge window [io  0xb000-0xbfff]
[    7.834409] pci 0000:a0:01.4:   bridge window [mem 0xc8600000-0xc87fffff]
[    7.841982] pci 0000:a0:01.4:   bridge window [mem 0x38481600000-0x384817fffff 64bit pref]
[    7.852326] pci 0000:a0:03.1: PCI bridge to [bus a5]
[    7.857854] pci 0000:a0:03.1:   bridge window [mem 0xcb500000-0xcb5fffff]
[    7.865447] pci 0000:a0:03.4: PCI bridge to [bus a6]
[    7.870983] pci 0000:a0:03.4:   bridge window [mem 0x48480f00000-0x48480ffffff 64bit pref]
[    7.880420] pci 0000:a7:00.0: PCI bridge to [bus a8]
[    7.885955] pci 0000:a7:00.0:   bridge window [io  0xc000-0xcfff]
[    7.892753] pci 0000:a7:00.0:   bridge window [mem 0xca000000-0xcb1fffff]
[    7.900333] pci 0000:a0:03.5: PCI bridge to [bus a7-a8]
[    7.906158] pci 0000:a0:03.5:   bridge window [io  0xc000-0xcfff]
[    7.912944] pci 0000:a0:03.5:   bridge window [mem 0xca000000-0xcb1fffff]
[    7.921469] pci 0000:a0:07.1: PCI bridge to [bus a9]
[    7.927006] pci 0000:a0:07.1:   bridge window [mem 0xcb300000-0xcb4fffff]
[    7.934593] pci_bus 0000:a0: resource 4 [io  0x03b0-0x03df window]
[    7.941485] pci_bus 0000:a0: resource 5 [io  0xb000-0xcfff window]
[    7.948368] pci_bus 0000:a0: resource 6 [mem 0x000a0000-0x000bffff window]
[    7.956034] pci_bus 0000:a0: resource 7 [mem 0xc8000000-0xcb5fffff window]
[    7.963701] pci_bus 0000:a0: resource 8 [mem 0x38481000000-0x48480ffffff window]
[    7.971950] pci_bus 0000:a1: resource 1 [mem 0xc8000000-0xc81fffff]
[    7.978929] pci_bus 0000:a1: resource 2 [mem 0x38481000000-0x384811fffff 64bit pref]
[    7.987565] pci_bus 0000:a2: resource 1 [mem 0xc8200000-0xc83fffff]
[    7.994553] pci_bus 0000:a2: resource 2 [mem 0x38481200000-0x384813fffff 64bit pref]
[    8.003190] pci_bus 0000:a3: resource 1 [mem 0xc8400000-0xc85fffff]
[    8.010180] pci_bus 0000:a3: resource 2 [mem 0x38481400000-0x384815fffff 64bit pref]
[    8.018815] pci_bus 0000:a4: resource 0 [io  0xb000-0xbfff]
[    8.025028] pci_bus 0000:a4: resource 1 [mem 0xc8600000-0xc87fffff]
[    8.032015] pci_bus 0000:a4: resource 2 [mem 0x38481600000-0x384817fffff 64bit pref]
[    8.040652] pci_bus 0000:a5: resource 1 [mem 0xcb500000-0xcb5fffff]
[    8.047632] pci_bus 0000:a6: resource 2 [mem 0x48480f00000-0x48480ffffff 64bit pref]
[    8.056269] pci_bus 0000:a7: resource 0 [io  0xc000-0xcfff]
[    8.062481] pci_bus 0000:a7: resource 1 [mem 0xca000000-0xcb1fffff]
[    8.069460] pci_bus 0000:a8: resource 0 [io  0xc000-0xcfff]
[    8.075665] pci_bus 0000:a8: resource 1 [mem 0xca000000-0xcb1fffff]
[    8.082655] pci_bus 0000:a9: resource 1 [mem 0xcb300000-0xcb4fffff]
[    8.089657] pci 0000:00:07.1: PCI bridge to [bus 01]
[    8.095213] pci_bus 0000:00: resource 4 [io  0x0000-0x02e7 window]
[    8.102105] pci_bus 0000:00: resource 5 [io  0x0300-0x03af window]
[    8.108996] pci_bus 0000:00: resource 6 [io  0x0400-0x0cf7 window]
[    8.115887] pci_bus 0000:00: resource 7 [io  0x1000-0x2fff window]
[    8.122784] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff window]
[    8.130452] pci_bus 0000:00: resource 9 [mem 0xee000000-0xefffffff window]
[    8.138122] pci_bus 0000:00: resource 10 [mem 0x584e1000000-0x684e0ffffff window]
[    8.146535] pci 0000:40:01.1: bridge window [io  0x1000-0x0fff] to [bus 41] add_size 1000
[    8.155661] pci 0000:40:01.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 41] add_size 200000 add_align 100000
[    8.168467] pci 0000:40:01.2: bridge window [io  0x1000-0x0fff] to [bus 42] add_size 1000
[    8.177580] pci 0000:40:01.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 42] add_size 200000 add_align 100000
[    8.190387] pci 0000:40:01.3: bridge window [io  0x1000-0x0fff] to [bus 43] add_size 1000
[    8.199508] pci 0000:40:01.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 43] add_size 200000 add_align 100000
[    8.212304] pci 0000:40:01.4: bridge window [io  0x1000-0x0fff] to [bus 44] add_size 1000
[    8.221425] pci 0000:40:01.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 44] add_size 200000 add_align 100000
[    8.234237] pci 0000:40:01.1: bridge window [mem 0x78541000000-0x785411fffff 64bit pref]: assigned
[    8.244232] pci 0000:40:01.2: bridge window [mem 0x78541200000-0x785413fffff 64bit pref]: assigned
[    8.254217] pci 0000:40:01.3: bridge window [mem 0x78541400000-0x785415fffff 64bit pref]: assigned
[    8.264211] pci 0000:40:01.4: bridge window [mem 0x78541600000-0x785417fffff 64bit pref]: assigned
[    8.274206] pci 0000:40:01.1: bridge window [io  0x5000-0x5fff]: assigned
[    8.281776] pci 0000:40:01.2: bridge window [io  0x6000-0x6fff]: assigned
[    8.289337] pci 0000:40:01.3: bridge window [io  size 0x1000]: can't assign; no space
[    8.298063] pci 0000:40:01.3: bridge window [io  size 0x1000]: failed to assign
[    8.306215] pci 0000:40:01.4: bridge window [io  size 0x1000]: can't assign; no space
[    8.314950] pci 0000:40:01.4: bridge window [io  size 0x1000]: failed to assign
[    8.323104] pci 0000:40:01.4: bridge window [io  0x5000-0x5fff]: assigned
[    8.330675] pci 0000:40:01.3: bridge window [io  0x6000-0x6fff]: assigned
[    8.338247] pci 0000:40:01.2: bridge window [io  size 0x1000]: can't assign; no space
[    8.346983] pci 0000:40:01.2: bridge window [io  size 0x1000]: failed to assign
[    8.355139] pci 0000:40:01.1: bridge window [io  size 0x1000]: can't assign; no space
[    8.363876] pci 0000:40:01.1: bridge window [io  size 0x1000]: failed to assign
[    8.372034] pci 0000:40:01.1: PCI bridge to [bus 41]
[    8.377570] pci 0000:40:01.1:   bridge window [mem 0xb8900000-0xb8bfffff]
[    8.385141] pci 0000:40:01.1:   bridge window [mem 0x78541000000-0x785411fffff 64bit pref]
[    8.394549] pci 0000:40:01.2: PCI bridge to [bus 42]
[    8.400085] pci 0000:40:01.2:   bridge window [mem 0xb8600000-0xb88fffff]
[    8.407656] pci 0000:40:01.2:   bridge window [mem 0x78541200000-0x785413fffff 64bit pref]
[    8.416895] pci 0000:40:01.3: PCI bridge to [bus 43]
[    8.422430] pci 0000:40:01.3:   bridge window [io  0x6000-0x6fff]
[    8.429226] pci 0000:40:01.3:   bridge window [mem 0xb8300000-0xb85fffff]
[    8.436796] pci 0000:40:01.3:   bridge window [mem 0x78541400000-0x785415fffff 64bit pref]
[    8.446402] pci 0000:40:01.4: PCI bridge to [bus 44]
[    8.451937] pci 0000:40:01.4:   bridge window [io  0x5000-0x5fff]
[    8.458732] pci 0000:40:01.4:   bridge window [mem 0xb8000000-0xb82fffff]
[    8.466302] pci 0000:40:01.4:   bridge window [mem 0x78541600000-0x785417fffff 64bit pref]
[    8.476663] pci 0000:40:07.1: PCI bridge to [bus 45]
[    8.482199] pci 0000:40:07.1:   bridge window [mem 0xb8d00000-0xb8dfffff]
[    8.489787] pci 0000:40:07.2: PCI bridge to [bus 46]
[    8.495314] pci 0000:40:07.2:   bridge window [mem 0xb8c00000-0xb8cfffff]
[    8.502901] pci_bus 0000:40: resource 4 [io  0x5000-0x6fff window]
[    8.509782] pci_bus 0000:40: resource 5 [mem 0xb6000000-0xb8dfffff window]
[    8.517449] pci_bus 0000:40: resource 6 [mem 0x78541000000-0x88540ffffff window]
[    8.525699] pci_bus 0000:41: resource 1 [mem 0xb8900000-0xb8bfffff]
[    8.532687] pci_bus 0000:41: resource 2 [mem 0x78541000000-0x785411fffff 64bit pref]
[    8.541323] pci_bus 0000:42: resource 1 [mem 0xb8600000-0xb88fffff]
[    8.548312] pci_bus 0000:42: resource 2 [mem 0x78541200000-0x785413fffff 64bit pref]
[    8.556949] pci_bus 0000:43: resource 0 [io  0x6000-0x6fff]
[    8.563163] pci_bus 0000:43: resource 1 [mem 0xb8300000-0xb85fffff]
[    8.570151] pci_bus 0000:43: resource 2 [mem 0x78541400000-0x785415fffff 64bit pref]
[    8.578787] pci_bus 0000:44: resource 0 [io  0x5000-0x5fff]
[    8.584992] pci_bus 0000:44: resource 1 [mem 0xb8000000-0xb82fffff]
[    8.591981] pci_bus 0000:44: resource 2 [mem 0x78541600000-0x785417fffff 64bit pref]
[    8.600619] pci_bus 0000:45: resource 1 [mem 0xb8d00000-0xb8dfffff]
[    8.607610] pci_bus 0000:46: resource 1 [mem 0xb8c00000-0xb8cfffff]
[    8.614604] pci 0000:80:01.1: bridge window [io  0x1000-0x0fff] to [bus 81] add_size 1000
[    8.623726] pci 0000:80:01.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 81] add_size 200000 add_align 100000
[    8.636524] pci 0000:80:01.1: bridge window [mem 0x00100000-0x000fffff] to [bus 81] add_size 200000 add_align 100000
[    8.648266] pci 0000:80:01.2: bridge window [io  0x1000-0x0fff] to [bus 82] add_size 1000
[    8.657389] pci 0000:80:01.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 82] add_size 200000 add_align 100000
[    8.670195] pci 0000:80:01.2: bridge window [mem 0x00100000-0x000fffff] to [bus 82] add_size 200000 add_align 100000
[    8.681934] pci 0000:80:01.3: bridge window [io  0x1000-0x0fff] to [bus 83] add_size 1000
[    8.691058] pci 0000:80:01.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 83] add_size 200000 add_align 100000
[    8.703864] pci 0000:80:01.3: bridge window [mem 0x00100000-0x000fffff] to [bus 83] add_size 200000 add_align 100000
[    8.715595] pci 0000:80:01.4: bridge window [io  0x1000-0x0fff] to [bus 84] add_size 1000
[    8.724718] pci 0000:80:01.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 84] add_size 200000 add_align 100000
[    8.737525] pci 0000:80:01.4: bridge window [mem 0x00100000-0x000fffff] to [bus 84] add_size 200000 add_align 100000
[    8.749267] pci 0000:80:01.1: bridge window [mem 0xc0000000-0xc01fffff]: assigned
[    8.757614] pci 0000:80:01.1: bridge window [mem 0x48481000000-0x484811fffff 64bit pref]: assigned
[    8.767610] pci 0000:80:01.2: bridge window [mem 0xc0200000-0xc03fffff]: assigned
[    8.775955] pci 0000:80:01.2: bridge window [mem 0x48481200000-0x484813fffff 64bit pref]: assigned
[    8.785949] pci 0000:80:01.3: bridge window [mem 0xc0400000-0xc05fffff]: assigned
[    8.794295] pci 0000:80:01.3: bridge window [mem 0x48481400000-0x484815fffff 64bit pref]: assigned
[    8.804291] pci 0000:80:01.4: bridge window [mem 0xc0600000-0xc07fffff]: assigned
[    8.812637] pci 0000:80:01.4: bridge window [mem 0x48481600000-0x484817fffff 64bit pref]: assigned
[    8.822631] pci 0000:80:01.1: bridge window [io  0x9000-0x9fff]: assigned
[    8.830192] pci 0000:80:01.2: bridge window [io  0xa000-0xafff]: assigned
[    8.837755] pci 0000:80:01.3: bridge window [io  size 0x1000]: can't assign; no space
[    8.846490] pci 0000:80:01.3: bridge window [io  size 0x1000]: failed to assign
[    8.854641] pci 0000:80:01.4: bridge window [io  size 0x1000]: can't assign; no space
[    8.863375] pci 0000:80:01.4: bridge window [io  size 0x1000]: failed to assign
[    8.871530] pci 0000:80:01.4: bridge window [io  0x9000-0x9fff]: assigned
[    8.879100] pci 0000:80:01.3: bridge window [io  0xa000-0xafff]: assigned
[    8.886661] pci 0000:80:01.2: bridge window [io  size 0x1000]: can't assign; no space
[    8.895395] pci 0000:80:01.2: bridge window [io  size 0x1000]: failed to assign
[    8.903547] pci 0000:80:01.1: bridge window [io  size 0x1000]: can't assign; no space
[    8.912282] pci 0000:80:01.1: bridge window [io  size 0x1000]: failed to assign
[    8.920434] pci 0000:80:01.1: PCI bridge to [bus 81]
[    8.925969] pci 0000:80:01.1:   bridge window [mem 0xc0000000-0xc01fffff]
[    8.933539] pci 0000:80:01.1:   bridge window [mem 0x48481000000-0x484811fffff 64bit pref]
[    8.943272] pci 0000:80:01.2: PCI bridge to [bus 82]
[    8.948807] pci 0000:80:01.2:   bridge window [mem 0xc0200000-0xc03fffff]
[    8.956377] pci 0000:80:01.2:   bridge window [mem 0x48481200000-0x484813fffff 64bit pref]
[    8.965616] pci 0000:80:01.3: PCI bridge to [bus 83]
[    8.971151] pci 0000:80:01.3:   bridge window [io  0xa000-0xafff]
[    8.977948] pci 0000:80:01.3:   bridge window [mem 0xc0400000-0xc05fffff]
[    8.985521] pci 0000:80:01.3:   bridge window [mem 0x48481400000-0x484815fffff 64bit pref]
[    8.995120] pci 0000:80:01.4: PCI bridge to [bus 84]
[    9.000654] pci 0000:80:01.4:   bridge window [io  0x9000-0x9fff]
[    9.007440] pci 0000:80:01.4:   bridge window [mem 0xc0600000-0xc07fffff]
[    9.015011] pci 0000:80:01.4:   bridge window [mem 0x48481600000-0x484817fffff 64bit pref]
[    9.025376] pci_bus 0000:80: resource 4 [io  0x9000-0xafff window]
[    9.032268] pci_bus 0000:80: resource 5 [mem 0xc0000000-0xc1ffffff window]
[    9.039926] pci_bus 0000:80: resource 6 [mem 0x48481000000-0x58480ffffff window]
[    9.048175] pci_bus 0000:81: resource 1 [mem 0xc0000000-0xc01fffff]
[    9.055154] pci_bus 0000:81: resource 2 [mem 0x48481000000-0x484811fffff 64bit pref]
[    9.063790] pci_bus 0000:82: resource 1 [mem 0xc0200000-0xc03fffff]
[    9.070780] pci_bus 0000:82: resource 2 [mem 0x48481200000-0x484813fffff 64bit pref]
[    9.079418] pci_bus 0000:83: resource 0 [io  0xa000-0xafff]
[    9.085630] pci_bus 0000:83: resource 1 [mem 0xc0400000-0xc05fffff]
[    9.092617] pci_bus 0000:83: resource 2 [mem 0x48481400000-0x484815fffff 64bit pref]
[    9.101254] pci_bus 0000:84: resource 0 [io  0x9000-0x9fff]
[    9.107458] pci_bus 0000:84: resource 1 [mem 0xc0600000-0xc07fffff]
[    9.114448] pci_bus 0000:84: resource 2 [mem 0x48481600000-0x484817fffff 64bit pref]
[    9.123088] pci_bus 0000:c0: resource 4 [io  0xd000-0xefff window]
[    9.129981] pci_bus 0000:c0: resource 5 [mem 0xd2000000-0xd3ffffff window]
[    9.137648] pci_bus 0000:c0: resource 6 [mem 0x28421000000-0x38420ffffff window]
[    9.145902] pci 0000:60:01.1: bridge window [io  0x1000-0x0fff] to [bus 61] add_size 1000
[    9.155023] pci 0000:60:01.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 61] add_size 200000 add_align 100000
[    9.167830] pci 0000:60:01.2: bridge window [io  0x1000-0x0fff] to [bus 62] add_size 1000
[    9.176951] pci 0000:60:01.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 62] add_size 200000 add_align 100000
[    9.189765] pci 0000:60:01.3: bridge window [io  0x1000-0x0fff] to [bus 63] add_size 1000
[    9.198886] pci 0000:60:01.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 63] add_size 200000 add_align 100000
[    9.211692] pci 0000:60:01.4: bridge window [io  0x1000-0x0fff] to [bus 64] add_size 1000
[    9.220814] pci 0000:60:01.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 64] add_size 200000 add_align 100000
[    9.233612] pci 0000:60:01.1: bridge window [mem 0x88541000000-0x885411fffff 64bit pref]: assigned
[    9.243606] pci 0000:60:01.2: bridge window [mem 0x88541200000-0x885413fffff 64bit pref]: assigned
[    9.253593] pci 0000:60:01.3: bridge window [mem 0x88541400000-0x885415fffff 64bit pref]: assigned
[    9.263589] pci 0000:60:01.4: bridge window [mem 0x88541600000-0x885417fffff 64bit pref]: assigned
[    9.273583] pci 0000:60:01.1: bridge window [io  0x7000-0x7fff]: assigned
[    9.281153] pci 0000:60:01.2: bridge window [io  0x8000-0x8fff]: assigned
[    9.288724] pci 0000:60:01.3: bridge window [io  size 0x1000]: can't assign; no space
[    9.297461] pci 0000:60:01.3: bridge window [io  size 0x1000]: failed to assign
[    9.305613] pci 0000:60:01.4: bridge window [io  size 0x1000]: can't assign; no space
[    9.314347] pci 0000:60:01.4: bridge window [io  size 0x1000]: failed to assign
[    9.322500] pci 0000:60:01.4: bridge window [io  0x7000-0x7fff]: assigned
[    9.330071] pci 0000:60:01.3: bridge window [io  0x8000-0x8fff]: assigned
[    9.337641] pci 0000:60:01.2: bridge window [io  size 0x1000]: can't assign; no space
[    9.346367] pci 0000:60:01.2: bridge window [io  size 0x1000]: failed to assign
[    9.354520] pci 0000:60:01.1: bridge window [io  size 0x1000]: can't assign; no space
[    9.363254] pci 0000:60:01.1: bridge window [io  size 0x1000]: failed to assign
[    9.371408] pci 0000:60:01.1: PCI bridge to [bus 61]
[    9.376943] pci 0000:60:01.1:   bridge window [mem 0xb2900000-0xb2bfffff]
[    9.384514] pci 0000:60:01.1:   bridge window [mem 0x88541000000-0x885411fffff 64bit pref]
[    9.394797] pci 0000:60:01.2: PCI bridge to [bus 62]
[    9.400334] pci 0000:60:01.2:   bridge window [mem 0xb2600000-0xb28fffff]
[    9.407905] pci 0000:60:01.2:   bridge window [mem 0x88541200000-0x885413fffff 64bit pref]
[    9.417142] pci 0000:60:01.3: PCI bridge to [bus 63]
[    9.422675] pci 0000:60:01.3:   bridge window [io  0x8000-0x8fff]
[    9.429472] pci 0000:60:01.3:   bridge window [mem 0xb2300000-0xb25fffff]
[    9.437043] pci 0000:60:01.3:   bridge window [mem 0x88541400000-0x885415fffff 64bit pref]
[    9.446643] pci 0000:60:01.4: PCI bridge to [bus 64]
[    9.452168] pci 0000:60:01.4:   bridge window [io  0x7000-0x7fff]
[    9.458963] pci 0000:60:01.4:   bridge window [mem 0xb2000000-0xb22fffff]
[    9.466533] pci 0000:60:01.4:   bridge window [mem 0x88541600000-0x885417fffff 64bit pref]
[    9.476893] pci_bus 0000:60: resource 4 [io  0x7000-0x8fff window]
[    9.483784] pci_bus 0000:60: resource 5 [mem 0xb0000000-0xb2bfffff window]
[    9.491442] pci_bus 0000:60: resource 6 [mem 0x88541000000-0x98540ffffff window]
[    9.499683] pci_bus 0000:61: resource 1 [mem 0xb2900000-0xb2bfffff]
[    9.506673] pci_bus 0000:61: resource 2 [mem 0x88541000000-0x885411fffff 64bit pref]
[    9.515310] pci_bus 0000:62: resource 1 [mem 0xb2600000-0xb28fffff]
[    9.522300] pci_bus 0000:62: resource 2 [mem 0x88541200000-0x885413fffff 64bit pref]
[    9.530936] pci_bus 0000:63: resource 0 [io  0x8000-0x8fff]
[    9.537147] pci_bus 0000:63: resource 1 [mem 0xb2300000-0xb25fffff]
[    9.544136] pci_bus 0000:63: resource 2 [mem 0x88541400000-0x885415fffff 64bit pref]
[    9.552774] pci_bus 0000:64: resource 0 [io  0x7000-0x7fff]
[    9.558986] pci_bus 0000:64: resource 1 [mem 0xb2000000-0xb22fffff]
[    9.565966] pci_bus 0000:64: resource 2 [mem 0x88541600000-0x885417fffff 64bit pref]
[    9.574596] pci_bus 0000:20: resource 4 [io  0x3000-0x4fff window]
[    9.581489] pci_bus 0000:20: resource 5 [mem 0xba000000-0xbbffffff window]
[    9.589155] pci_bus 0000:20: resource 6 [mem 0x684e1000000-0x784e0ffffff window]
[    9.597671] PCI: CLS 64 bytes, default 64
[    9.602212] Unpacking initramfs...
[    9.651692] Freeing initrd memory: 26052K
[    9.675797] AMD-Vi: IOMMU SNP support enabled.
[    9.680840] pci 0000:e0:00.2: AMD-Vi: IOMMU performance counters supported
[    9.688617] platform AMDI0096:00: Adding to iommu group 0
[    9.695261] pci 0000:e0:00.3: Adding to iommu group 1
[    9.700912] pci 0000:e0:01.0: Adding to iommu group 2
[    9.706560] pci 0000:e0:02.0: Adding to iommu group 3
[    9.712213] pci 0000:e0:03.0: Adding to iommu group 4
[    9.717864] pci 0000:e0:04.0: Adding to iommu group 5
[    9.723516] pci 0000:e0:05.0: Adding to iommu group 6
[    9.729174] pci 0000:e0:07.0: Adding to iommu group 7
[    9.734817] pci 0000:e0:07.1: Adding to iommu group 8
[    9.740458] pci 0000:e0:07.2: Adding to iommu group 7
[    9.746116] pci 0000:e1:00.0: Adding to iommu group 9
[    9.751758] pci 0000:e1:00.4: Adding to iommu group 9
[    9.757392] pci 0000:e2:00.0: Adding to iommu group 7
[    9.763025] pci 0000:e2:00.1: Adding to iommu group 7
[    9.768698] pci 0000:80:01.0: Adding to iommu group 10
[    9.774438] pci 0000:80:01.1: Adding to iommu group 11
[    9.780177] pci 0000:80:01.2: Adding to iommu group 12
[    9.785919] pci 0000:80:01.3: Adding to iommu group 13
[    9.791660] pci 0000:80:01.4: Adding to iommu group 14
[    9.797407] pci 0000:80:02.0: Adding to iommu group 15
[    9.809640] pci 0000:a0:00.2: AMD-Vi: IOMMU performance counters supported
[    9.817471] pci 0000:a0:01.0: Adding to iommu group 16
[    9.823215] pci 0000:a0:01.1: Adding to iommu group 17
[    9.828961] pci 0000:a0:01.2: Adding to iommu group 18
[    9.834703] pci 0000:a0:01.3: Adding to iommu group 19
[    9.840444] pci 0000:a0:01.4: Adding to iommu group 20
[    9.846191] pci 0000:a0:02.0: Adding to iommu group 21
[    9.851939] pci 0000:a0:03.0: Adding to iommu group 22
[    9.857681] pci 0000:a0:03.1: Adding to iommu group 23
[    9.863421] pci 0000:a0:03.4: Adding to iommu group 24
[    9.869162] pci 0000:a0:03.5: Adding to iommu group 25
[    9.874908] pci 0000:a0:04.0: Adding to iommu group 26
[    9.880656] pci 0000:a0:05.0: Adding to iommu group 27
[    9.886403] pci 0000:a0:07.0: Adding to iommu group 28
[    9.892143] pci 0000:a0:07.1: Adding to iommu group 29
[    9.897883] pci 0000:a5:00.0: Adding to iommu group 30
[    9.903623] pci 0000:a6:00.0: Adding to iommu group 31
[    9.909363] pci 0000:a7:00.0: Adding to iommu group 32
[    9.915096] pci 0000:a8:00.0: Adding to iommu group 32
[    9.920831] pci 0000:a8:01.0: Adding to iommu group 32
[    9.926587] pci 0000:a9:00.0: Adding to iommu group 33
[    9.932327] pci 0000:a9:00.5: Adding to iommu group 33
[    9.938093] pci 0000:c0:00.3: Adding to iommu group 34
[    9.943839] pci 0000:c0:01.0: Adding to iommu group 35
[    9.949586] pci 0000:c0:02.0: Adding to iommu group 36
[    9.966163] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    9.973960] platform AMDI0095:00: Adding to iommu group 37
[    9.980782] pci 0000:00:00.3: Adding to iommu group 38
[    9.986532] pci 0000:00:01.0: Adding to iommu group 39
[    9.992279] pci 0000:00:02.0: Adding to iommu group 40
[    9.998025] pci 0000:00:03.0: Adding to iommu group 41
[   10.003773] pci 0000:00:04.0: Adding to iommu group 42
[   10.009521] pci 0000:00:05.0: Adding to iommu group 43
[   10.015269] pci 0000:00:07.0: Adding to iommu group 44
[   10.021008] pci 0000:00:07.1: Adding to iommu group 45
[   10.026764] pci 0000:00:14.0: Adding to iommu group 46
[   10.032506] pci 0000:00:14.3: Adding to iommu group 46
[   10.038301] pci 0000:00:18.0: Adding to iommu group 47
[   10.044099] pci 0000:00:18.1: Adding to iommu group 47
[   10.049842] pci 0000:00:18.2: Adding to iommu group 47
[   10.055584] pci 0000:00:18.3: Adding to iommu group 47
[   10.061324] pci 0000:00:18.4: Adding to iommu group 47
[   10.067065] pci 0000:00:18.5: Adding to iommu group 47
[   10.072805] pci 0000:00:18.6: Adding to iommu group 47
[   10.078547] pci 0000:00:18.7: Adding to iommu group 47
[   10.084287] pci 0000:01:00.0: Adding to iommu group 48
[   10.090049] pci 0000:60:01.0: Adding to iommu group 49
[   10.095788] pci 0000:60:01.1: Adding to iommu group 50
[   10.101526] pci 0000:60:01.2: Adding to iommu group 51
[   10.107267] pci 0000:60:01.3: Adding to iommu group 52
[   10.113008] pci 0000:60:01.4: Adding to iommu group 53
[   10.118756] pci 0000:60:02.0: Adding to iommu group 54
[   10.124497] pci 0000:61:00.0: Adding to iommu group 55
[   10.130238] pci 0000:62:00.0: Adding to iommu group 56
[   10.135978] pci 0000:63:00.0: Adding to iommu group 57
[   10.141722] pci 0000:64:00.0: Adding to iommu group 58
[   10.157282] pci 0000:40:00.2: AMD-Vi: IOMMU performance counters supported
[   10.165107] pci 0000:00:00.0: Adding to iommu group 38
[   10.170873] pci 0000:40:01.0: Adding to iommu group 59
[   10.176614] pci 0000:40:01.1: Adding to iommu group 60
[   10.182355] pci 0000:40:01.2: Adding to iommu group 61
[   10.188095] pci 0000:40:01.3: Adding to iommu group 62
[   10.193838] pci 0000:40:01.4: Adding to iommu group 63
[   10.199587] pci 0000:40:02.0: Adding to iommu group 64
[   10.205333] pci 0000:40:03.0: Adding to iommu group 65
[   10.211083] pci 0000:40:04.0: Adding to iommu group 66
[   10.216829] pci 0000:40:05.0: Adding to iommu group 67
[   10.222583] pci 0000:40:07.0: Adding to iommu group 68
[   10.228323] pci 0000:40:07.1: Adding to iommu group 69
[   10.234067] pci 0000:40:07.2: Adding to iommu group 68
[   10.239808] pci 0000:41:00.0: Adding to iommu group 70
[   10.245550] pci 0000:42:00.0: Adding to iommu group 71
[   10.251291] pci 0000:43:00.0: Adding to iommu group 72
[   10.257030] pci 0000:44:00.0: Adding to iommu group 73
[   10.262784] pci 0000:45:00.0: Adding to iommu group 74
[   10.268529] pci 0000:45:00.4: Adding to iommu group 74
[   10.274261] pci 0000:46:00.0: Adding to iommu group 68
[   10.279991] pci 0000:46:00.1: Adding to iommu group 68
[   10.285748] pci 0000:20:00.3: Adding to iommu group 75
[   10.291495] pci 0000:20:01.0: Adding to iommu group 76
[   10.297241] pci 0000:20:02.0: Adding to iommu group 77
[   10.311765] AMD-Vi: Extended features (0xa5bf732fa2295afe, 0x53d): PPR X2APIC NX GT [5] IA GA PC GA_vAPIC SNP
[   10.322838] AMD-Vi: Interrupt remapping enabled
[   10.327889] AMD-Vi: X2APIC enabled
[   10.332404] AMD-Vi: Virtual APIC enabled
[   10.336795] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[   10.343972] software IO TLB: mapped [mem 0x0000000088c52000-0x000000008cc52000] (64MB)
[   10.352845] LVT offset 0 assigned for vector 0x400
[   10.360609] perf: AMD IBS detected (0x00081bff)
[   10.365682] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[   10.373654] perf/amd_iommu: Detected AMD IOMMU #1 (2 banks, 4 counters/bank).
[   10.381623] perf/amd_iommu: Detected AMD IOMMU #2 (2 banks, 4 counters/bank).
[   10.389594] perf/amd_iommu: Detected AMD IOMMU #3 (2 banks, 4 counters/bank).
[   10.399203] Initialise system trusted keyrings
[   10.404166] Key type blacklist registered
[   10.408680] workingset: timestamp_bits=36 max_order=29 bucket_order=0
[   10.416092] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   10.422680] fuse: init (API version 7.44)
[   10.427335] integrity: Platform Keyring initialized
[   10.438331] Key type asymmetric registered
[   10.442896] Asymmetric key parser 'x509' registered
[   10.448349] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[   10.456684] io scheduler mq-deadline registered
[   10.466132] ledtrig-cpu: registered to indicate activity on CPUs
[   10.473196] pcieport 0000:e0:00.3: PME: Signaling with IRQ 40
[   10.479762] pcieport 0000:e0:07.1: PME: Signaling with IRQ 41
[   10.486340] pcieport 0000:e0:07.2: PME: Signaling with IRQ 42
[   10.492925] pcieport 0000:a0:01.1: PME: Signaling with IRQ 43
[   10.499368] pcieport 0000:a0:01.1: pciehp: Slot #31 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   10.527529] pcieport 0000:a0:01.2: PME: Signaling with IRQ 44
[   10.533967] pcieport 0000:a0:01.2: pciehp: Slot #30 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   10.562115] pcieport 0000:a0:01.3: PME: Signaling with IRQ 45
[   10.568556] pcieport 0000:a0:01.3: pciehp: Slot #29 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   10.596681] pcieport 0000:a0:01.4: PME: Signaling with IRQ 46
[   10.603118] pcieport 0000:a0:01.4: pciehp: Slot #28 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   10.631243] pcieport 0000:a0:03.1: PME: Signaling with IRQ 47
[   10.637973] pcieport 0000:a0:03.4: PME: Signaling with IRQ 48
[   10.644696] pcieport 0000:a0:03.5: PME: Signaling with IRQ 49
[   10.651387] pcieport 0000:a0:07.1: PME: Signaling with IRQ 51
[   10.659159] pcieport 0000:00:00.3: PME: Signaling with IRQ 53
[   10.665719] pcieport 0000:00:07.1: PME: Signaling with IRQ 55
[   10.672294] pcieport 0000:40:01.1: PME: Signaling with IRQ 56
[   10.678737] pcieport 0000:40:01.1: pciehp: Slot #32 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   10.706849] pcieport 0000:40:01.2: PME: Signaling with IRQ 57
[   10.713291] pcieport 0000:40:01.2: pciehp: Slot #33 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   10.741400] pcieport 0000:40:01.3: PME: Signaling with IRQ 58
[   10.747843] pcieport 0000:40:01.3: pciehp: Slot #34 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   10.775967] pcieport 0000:40:01.4: PME: Signaling with IRQ 59
[   10.782409] pcieport 0000:40:01.4: pciehp: Slot #35 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   10.810494] pcieport 0000:40:07.1: PME: Signaling with IRQ 60
[   10.817052] pcieport 0000:40:07.2: PME: Signaling with IRQ 61
[   10.823619] pcieport 0000:80:01.1: PME: Signaling with IRQ 62
[   10.830056] pcieport 0000:80:01.1: pciehp: Slot #27 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   10.858164] pcieport 0000:80:01.2: PME: Signaling with IRQ 63
[   10.864603] pcieport 0000:80:01.2: pciehp: Slot #26 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   10.892721] pcieport 0000:80:01.3: PME: Signaling with IRQ 64
[   10.899157] pcieport 0000:80:01.3: pciehp: Slot #25 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   10.927275] pcieport 0000:80:01.4: PME: Signaling with IRQ 65
[   10.933710] pcieport 0000:80:01.4: pciehp: Slot #24 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   10.961529] pcieport 0000:80:01.4: pciehp: Slot(24): Card present
[   10.961830] pcieport 0000:c0:00.3: PME: Signaling with IRQ 67
[   10.974922] pcieport 0000:60:01.1: PME: Signaling with IRQ 68
[   10.981366] pcieport 0000:60:01.1: pciehp: Slot #36 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   11.009456] pcieport 0000:60:01.2: PME: Signaling with IRQ 69
[   11.015899] pcieport 0000:60:01.2: pciehp: Slot #37 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   11.044000] pcieport 0000:60:01.3: PME: Signaling with IRQ 70
[   11.050442] pcieport 0000:60:01.3: pciehp: Slot #38 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   11.078539] pcieport 0000:60:01.4: PME: Signaling with IRQ 71
[   11.084982] pcieport 0000:60:01.4: pciehp: Slot #39 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   11.113088] pcieport 0000:20:00.3: PME: Signaling with IRQ 73
[   11.120048] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[   11.129386] ACPI: button: Power Button [PWRB]
[   11.134272] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   11.142559] ACPI: button: Power Button [PWRF]
[   11.191475] Estimated ratio of average max frequency by base frequency (times 1024): 1293
[   11.200917] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
ÓÔÕÖרÙÚÛÜÝÞßàáâãäåæçèéêëìíîïðñòóôõö÷øùúûüýþÿ[   11.228621] 00:04: ttyS1 at I/O 0x2f8 (irq = 14, base_baud = 115200) is a 16550A
[   11.263570] 00:05: ttyS0 at I/O 0x3f8 (irq = 3, base_baud = 115200) is a 16550A
[   11.274132] Linux agpgart interface v0.103
[   11.305418] loop: module loaded
[   11.309661] nvme nvme0: pci function 0000:a5:00.0
[   11.310019] tun: Universal TUN/TAP device driver, 1.6
[   11.315259] nvme nvme1: pci function 0000:41:00.0
[   11.320680] PPP generic driver version 2.4.2
[   11.325906] nvme nvme2: pci function 0000:42:00.0
[   11.330811] VFIO - User Level meta-driver version: 0.3
[   11.336360] nvme nvme0: D3 entry latency set to 10 seconds
[   11.347672] nvme nvme3: pci function 0000:43:00.0
[   11.353180] nvme nvme4: pci function 0000:44:00.0
[   11.358681] nvme nvme5: pci function 0000:61:00.0
[   11.364219] nvme nvme6: pci function 0000:62:00.0
[   11.372728] nvme nvme8: pci function 0000:64:00.0
[   11.377998] nvme nvme7: pci function 0000:63:00.0
[   11.384199] nvme nvme1: D3 entry latency set to 10 seconds
[   11.390325] nvme nvme2: D3 entry latency set to 10 seconds
[   11.396988] xhci_hcd 0000:e1:00.4: xHCI Host Controller
[   11.402981] nvme nvme3: D3 entry latency set to 10 seconds
[   11.409262] xhci_hcd 0000:e1:00.4: new USB bus registered, assigned bus number 1
[   11.417584] nvme nvme4: D3 entry latency set to 10 seconds
[   11.426721] nvme nvme5: D3 entry latency set to 10 seconds
[   11.436777] nvme nvme8: D3 entry latency set to 10 seconds
[   11.443425] tsc: Refined TSC clocksource calibration: 2695.949 MHz
[   11.450395] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26dc4b6d6e5, max_idle_ns: 440795246579 ns
[   11.461618] nvme nvme7: D3 entry latency set to 10 seconds
[   11.467784] nvme nvme6: D3 entry latency set to 10 seconds
[   11.477310] xhci_hcd 0000:e1:00.4: hcc params 0x0118ffc5 hci version 0x120 quirks 0x0000000200000010
[   11.506008] xhci_hcd 0000:e1:00.4: xHCI Host Controller
[   11.511926] clocksource: Switched to clocksource tsc
[   11.517540] xhci_hcd 0000:e1:00.4: new USB bus registered, assigned bus number 2
[   11.526106] xhci_hcd 0000:e1:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[   11.534081] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.15
[   11.543310] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.551370] usb usb1: Product: xHCI Host Controller
[   11.556811] usb usb1: Manufacturer: Linux 6.15.0-rc3-next-20250422-2c9c612abe-1d2c58af2b2 xhci-hcd
[   11.566808] usb usb1: SerialNumber: 0000:e1:00.4
[   11.572479] hub 1-0:1.0: USB hub found
[   11.576741] hub 1-0:1.0: 2 ports detected
[   11.581319] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   11.590717] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.15
[   11.599943] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.608002] usb usb2: Product: xHCI Host Controller
[   11.613443] usb usb2: Manufacturer: Linux 6.15.0-rc3-next-20250422-2c9c612abe-1d2c58af2b2 xhci-hcd
[   11.623438] usb usb2: SerialNumber: 0000:e1:00.4
[   11.628722] hub 2-0:1.0: USB hub found
[   11.632960] hub 2-0:1.0: 2 ports detected
[   11.637886] xhci_hcd 0000:45:00.4: xHCI Host Controller
[   11.643775] xhci_hcd 0000:45:00.4: new USB bus registered, assigned bus number 3
[   11.652734] xhci_hcd 0000:45:00.4: hcc params 0x0118ffc5 hci version 0x120 quirks 0x0000000200000010
[   11.663464] xhci_hcd 0000:45:00.4: xHCI Host Controller
[   11.669333] xhci_hcd 0000:45:00.4: new USB bus registered, assigned bus number 4
[   11.677906] xhci_hcd 0000:45:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[   11.685829] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.15
[   11.695057] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.703115] usb usb3: Product: xHCI Host Controller
[   11.708555] usb usb3: Manufacturer: Linux 6.15.0-rc3-next-20250422-2c9c612abe-1d2c58af2b2 xhci-hcd
[   11.718557] usb usb3: SerialNumber: 0000:45:00.4
[   11.724566] hub 3-0:1.0: USB hub found
[   11.728802] hub 3-0:1.0: 2 ports detected
[   11.733395] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   11.742795] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.15
[   11.752022] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.760071] usb usb4: Product: xHCI Host Controller
[   11.765509] usb usb4: Manufacturer: Linux 6.15.0-rc3-next-20250422-2c9c612abe-1d2c58af2b2 xhci-hcd
[   11.775504] usb usb4: SerialNumber: 0000:45:00.4
[   11.780760] hub 4-0:1.0: USB hub found
[   11.785019] hub 4-0:1.0: 2 ports detected
[   11.789816] usbcore: registered new interface driver uas
[   11.795752] usbcore: registered new interface driver usb-storage
[   11.802453] usbcore: registered new interface driver usbsevseg
[   11.808972] i8042: PNP: No PS/2 controller found.
[   11.810213] nvme nvme0: 129/0/0 default/read/poll queues
[   11.814264] mousedev: PS/2 mouse device common for all mice
[   11.826738] rtc_cmos 00:01: registered as rtc0
[   11.830513] nvme nvme1: 127/0/0 default/read/poll queues
[   11.831773] rtc_cmos 00:01: setting system clock to 2025-04-22T11:33:33 UTC (1745321613)
[   11.837878] nvme nvme2: 127/0/0 default/read/poll queues
[   11.846675] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[   11.852619] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[   11.859080] nvme nvme3: 127/0/0 default/read/poll queues
[   11.859473] nvme nvme4: 127/0/0 default/read/poll queues
[   11.860064] i2c_dev: i2c /dev entries driver
[   11.864024]  nvme1n1: p1 p2 p3 p4
[   11.870744] nvme nvme6: 127/0/0 default/read/poll queues
[   11.873317] usbcore: registered new interface driver pcwd_usb
[   11.880276] nvme nvme7: 127/0/0 default/read/poll queues
[   11.883988] sbc_epx_c3: Hardware Watchdog Timer for Winsystems EPX-C3 SBC: 0.1
[   11.884889]  nvme4n1: p1
[   11.888260] nvme nvme8: 127/0/0 default/read/poll queues
[   11.891981]  nvme3n1: p1
[   11.893597] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16).
[   11.913048] nvme nvme5: 127/0/0 default/read/poll queues
[   11.913944] watchdog: Software Watchdog: a legacy watchdog module is probably present.
[   11.927177]  nvme6n1: p1
[   11.930560]  nvme7n1: p1
[   11.934571] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[   11.935669]  nvme2n1: p1
[   11.936623]  nvme8n1: p1
[   11.969980] softdog:              soft_reboot_cmd=<not set> soft_active_on_boot=0
[   11.978337] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[   11.991979] device-mapper: uevent: version 1.0.3
[   11.994719] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[   11.994733] pcieport 0000:80:01.4: pciehp: Slot(24): No link
[   11.997230] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: [email protected]
[   12.007239] usb 1-1: New USB device found, idVendor=0424, idProduct=2044, bcdDevice= 2.22
[   12.029737] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   12.037699] usb 1-1: Product: USX2044
[   12.041781] usb 1-1: Manufacturer: Microchip Tech
[   12.054059] efifb: probing for efifb
[   12.058067] efifb: framebuffer at 0xca000000, using 3072k, total 3072k
[   12.065351] efifb: mode is 1024x768x32, linelength=4096, pages=1
[   12.072051] efifb: scrolling: redraw
[   12.076035] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   12.082313] fbcon: Deferring console take-over
[   12.087268] fb0: EFI VGA frame buffer device
[   12.092070] comedi: version 0.7.76 - http://www.comedi.org
[   12.098299] drop_monitor: Initializing network drop monitor service
[   12.105840] xt_time: kernel timezone is -0000
[   12.110157] hub 1-1:1.0: USB hub found
[   12.110820] NET: Registered PF_INET6 protocol family
[   12.115133] hub 1-1:1.0: 5 ports detected
[   12.125006] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[   12.126626] Segment Routing with IPv6
[   12.136380] In-situ OAM (IOAM) with IPv6
[   12.140760] NET: Registered PF_PACKET protocol family
[   12.145533] usb 3-1: New USB device found, idVendor=0424, idProduct=2044, bcdDevice= 2.22
[   12.146581] Key type dns_resolver registered
[   12.151103] usb 2-1: New USB device found, idVendor=0424, idProduct=5044, bcdDevice= 2.22
[   12.151105] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[   12.151106] usb 2-1: Product: USX5044
[   12.151107] usb 2-1: Manufacturer: Microchip Tech
[   12.155516] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   12.194630] usb 3-1: Product: USX2044
[   12.198711] usb 3-1: Manufacturer: Microchip Tech
[   12.206077] hub 2-1:1.0: USB hub found
[   12.210310] hub 2-1:1.0: 4 ports detected
[   12.219899] microcode: Current revision: 0x0b002147
[   12.237351] resctrl: L3 allocation detected
[   12.242014] resctrl: MB allocation detected
[   12.246675] resctrl: SMBA allocation detected
[   12.251531] resctrl: L3 monitoring detected
[   12.256317] IPI shorthand broadcast: enabled
[   12.261994] hub 3-1:1.0: USB hub found
[   12.262123] sched_clock: Marking stable (12182376377, 78698906)->(13644358161, -1383282878)
[   12.262804] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[   12.266422] hub 3-1:1.0: 5 ports detected
[   12.279107] usb 4-1: New USB device found, idVendor=0424, idProduct=5044, bcdDevice= 2.22
[   12.296364] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[   12.296695] registered taskstats version 1
[   12.304324] usb 4-1: Product: USX5044
[   12.312972] usb 4-1: Manufacturer: Microchip Tech
[   12.321728] Loading compiled-in X.509 certificates
[   12.326713] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[   12.327405] Loaded X.509 cert 'Build time autogenerated kernel key: b29f71b5269a0e1e4986245474c360258dd503f3'
[   12.346503] Demotion targets for Node 0: null
[   12.352080] Key type .fscrypt registered
[   12.356451] Key type fscrypt-provisioning registered
[   12.357843] hub 4-1:1.0: USB hub found
[   12.366201] hub 4-1:1.0: 4 ports detected
[   12.372536] Key type encrypted registered
[   12.377007] AppArmor: AppArmor sha256 policy hashing enabled
[   12.383455] ima: No TPM chip found, activating TPM-bypass!
[   12.389565] Loading compiled-in module X.509 certificates
[   12.395814] Loaded X.509 cert 'Build time autogenerated kernel key: b29f71b5269a0e1e4986245474c360258dd503f3'
[   12.406878] ima: Allocated hash algorithm: sha1
[   12.411933] ima: No architecture policies found
[   12.417042] evm: Initialising EVM extended attributes:
[   12.422771] evm: security.selinux
[   12.426463] evm: security.SMACK64
[   12.430145] evm: security.SMACK64EXEC
[   12.434226] evm: security.SMACK64TRANSMUTE
[   12.438792] evm: security.SMACK64MMAP
[   12.442872] evm: security.apparmor
[   12.446659] evm: security.ima
[   12.449965] evm: security.capability
[   12.453949] evm: HMAC attrs: 0x1
[   12.457793] PM:   Magic number: 5:835:580
[   12.462424] pci_bus 0000:01: hash matches
[   12.467022] memory memory573: hash matches
[   12.471843] RAS: Correctable Errors collector initialized.
[   12.478161] clk: Disabling unused clocks
[   12.481238] usb 1-2: New USB device found, idVendor=1d6b, idProduct=0107, bcdDevice= 1.00
[   12.491657] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   12.491658] usb 1-2: Product: USB Virtual Hub
[   12.504473] usb 1-2: Manufacturer: Aspeed
[   12.508943] usb 1-2: SerialNumber: 00000000
[   12.514431] Freeing unused decrypted memory: 2036K
[   12.520330] Freeing unused kernel image (initmem) memory: 5164K
[   12.526942] Write protecting the kernel read-only data: 32768k
[   12.533735] Freeing unused kernel image (text/rodata gap) memory: 1284K
[   12.541320] Freeing unused kernel image (rodata/data gap) memory: 1576K
[   12.550719] usb 1-1.5: new high-speed USB device number 4 using xhci_hcd
[   12.558154] hub 1-2:1.0: USB hub found
[   12.562613] hub 1-2:1.0: 7 ports detected
[   12.633982] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[   12.641179] Run /init as init process
[   12.645281] usb 3-1.5: new high-speed USB device number 3 using xhci_hcd
Loading, please wait...
[   12.657614] usb 1-1.5: New USB device found, idVendor=0424, idProduct=2740, bcdDevice= 2.00
[   12.666934] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   12.675088] usb 1-1.5: Product: Hub Controller
[   12.680041] usb 1-1.5: Manufacturer: Microchip Tech
Starting systemd-udevd version 255.4-1ubuntu8.5
[   12.765534] usb 3-1.5: New USB device found, idVendor=0424, idProduct=2740, bcdDevice= 2.00
[   12.774857] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   12.783012] usb 3-1.5: Product: Hub Controller
[   12.787967] usb 3-1.5: Manufacturer: Microchip Tech
[   12.798487] ahci 0000:e2:00.0: SSS flag set, parallel bus scan disabled
[   12.805929] ahci 0000:e2:00.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[   12.806265] cryptd: max_cpu_qlen set to 1000
[   12.814861] ahci 0000:e2:00.0: 8/8 ports implemented (port mask 0xff)
[   12.814863] ahci 0000:e2:00.0: flags: 64bit ncq sntf ilck stag pm led clo only pmp fbs pio slum part sxs 
[   12.815696] scsi host0: ahci
[   12.841212] scsi host1: ahci
[   12.844628] scsi host2: ahci
[   12.848057] scsi host3: ahci
[   12.851448] scsi host4: ahci
[   12.854914] scsi host5: ahci
[   12.858299] scsi host6: ahci
[   12.861681] scsi host7: ahci
[   12.864937] ata1: SATA max UDMA/133 abar m2048@0xdc001000 port 0xdc001100 irq 1249 lpm-pol 0
[   12.874353] ata2: SATA max UDMA/133 abar m2048@0xdc001000 port 0xdc001180 irq 1250 lpm-pol 0
[   12.883765] ata3: SATA max UDMA/133 abar m2048@0xdc001000 port 0xdc001200 irq 1251 lpm-pol 0
[   12.893178] ata4: SATA max UDMA/133 abar m2048@0xdc001000 port 0xdc001280 irq 1252 lpm-pol 0
[   12.902590] ata5: SATA max UDMA/133 abar m2048@0xdc001000 port 0xdc001300 irq 1253 lpm-pol 0
[   12.911997] ata6: SATA max UDMA/133 abar m2048@0xdc001000 port 0xdc001380 irq 1254 lpm-pol 0
[   12.921410] ata7: SATA max UDMA/133 abar m2048@0xdc001000 port 0xdc001400 irq 1255 lpm-pol 0
[   12.930823] ata8: SATA max UDMA/133 abar m2048@0xdc001000 port 0xdc001480 irq 1256 lpm-pol 0
[   12.940903] ahci 0000:e2:00.1: SSS flag set, parallel bus scan disabled
[   12.948331] ahci 0000:e2:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[   12.957250] ahci 0000:e2:00.1: 8/8 ports implemented (port mask 0xff)
[   12.964424] ahci 0000:e2:00.1: flags: 64bit ncq sntf ilck stag pm led clo only pmp fbs pio slum part sxs 
[   12.975846] scsi host8: ahci
[   12.979236] scsi host9: ahci
[   12.982616] scsi host10: ahci
[   12.986104] scsi host11: ahci
[   12.989594] scsi host12: ahci
[   12.993084] scsi host13: ahci
[   12.996575] scsi host14: ahci
[   13.000052] scsi host15: ahci
[   13.003406] ata9: SATA max UDMA/133 abar m2048@0xdc000000 port 0xdc000100 irq 1267 lpm-pol 0
[   13.012821] ata10: SATA max UDMA/133 abar m2048@0xdc000000 port 0xdc000180 irq 1268 lpm-pol 0
[   13.022331] ata11: SATA max UDMA/133 abar m2048@0xdc000000 port 0xdc000200 irq 1269 lpm-pol 0
[   13.031843] ata12: SATA max UDMA/133 abar m2048@0xdc000000 port 0xdc000280 irq 1270 lpm-pol 0
[   13.041353] ata13: SATA max UDMA/133 abar m2048@0xdc000000 port 0xdc000300 irq 1271 lpm-pol 0
[   13.050864] ata14: SATA max UDMA/133 abar m2048@0xdc000000 port 0xdc000380 irq 1272 lpm-pol 0
[   13.060373] ata15: SATA max UDMA/133 abar m2048@0xdc000000 port 0xdc000400 irq 1273 lpm-pol 0
[   13.069883] ata16: SATA max UDMA/133 abar m2048@0xdc000000 port 0xdc000480 irq 1274 lpm-pol 0
[   13.079939] ahci 0000:46:00.0: SSS flag set, parallel bus scan disabled
[   13.087370] ahci 0000:46:00.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[   13.096297] ahci 0000:46:00.0: 8/8 ports implemented (port mask 0xff)
[   13.103471] ahci 0000:46:00.0: flags: 64bit ncq sntf ilck stag pm led clo only pmp fbs pio slum part sxs 
[   13.114901] scsi host16: ahci
[   13.118511] tg3 0000:a6:00.0 eth0: Tigon3 [partno(BCM5720A0KFBG) rev 5720000] (PCI Express) MAC address e8:80:88:0c:f3:0a
[   13.130757] tg3 0000:a6:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[   13.141726] tg3 0000:a6:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[   13.150461] tg3 0000:a6:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[   13.158087] scsi host17: ahci
[   13.161588] scsi host18: ahci
[   13.165086] scsi host19: ahci
[   13.168566] scsi host20: ahci
[   13.172067] scsi host21: ahci
[   13.175544] scsi host22: ahci
[   13.179013] scsi host23: ahci
[   13.182343] ata17: SATA max UDMA/133 abar m2048@0xb8c01000 port 0xb8c01100 irq 1283 lpm-pol 0
[   13.191855] ata18: SATA max UDMA/133 abar m2048@0xb8c01000 port 0xb8c01180 irq 1284 lpm-pol 0
[   13.201370] ata19: SATA max UDMA/133 abar m2048@0xb8c01000 port 0xb8c01200 irq 1285 lpm-pol 0
[   13.210882] ata20: SATA max UDMA/133 abar m2048@0xb8c01000 port 0xb8c01280 irq 1286 lpm-pol 0
[   13.220393] ata21: SATA max UDMA/133 abar m2048@0xb8c01000 port 0xb8c01300 irq 1287 lpm-pol 0
[   13.229904] ata22: SATA max UDMA/133 abar m2048@0xb8c01000 port 0xb8c01380 irq 1288 lpm-pol 0
[   13.239414] ata23: SATA max UDMA/133 abar m2048@0xb8c01000 port 0xb8c01400 irq 1289 lpm-pol 0
[   13.248925] ata24: SATA max UDMA/133 abar m2048@0xb8c01000 port 0xb8c01480 irq 1290 lpm-pol 0
[   13.253146] ata1: SATA link down (SStatus 0 SControl 300)
[   13.258934] ahci 0000:46:00.1: SSS flag set, parallel bus scan disabled
[   13.271884] ahci 0000:46:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[   13.280813] ahci 0000:46:00.1: 8/8 ports implemented (port mask 0xff)
[   13.287999] ahci 0000:46:00.1: flags: 64bit ncq sntf ilck stag pm led clo only pmp fbs pio slum part sxs 
[   13.299196] scsi host24: ahci
[   13.302677] scsi host25: ahci
[   13.306158] scsi host26: ahci
[   13.309632] scsi host27: ahci
[   13.313100] scsi host28: ahci
[   13.316576] scsi host29: ahci
[   13.320020] scsi host30: ahci
[   13.323468] scsi host31: ahci
[   13.326820] ata25: SATA max UDMA/133 abar m2048@0xb8c00000 port 0xb8c00100 irq 1300 lpm-pol 0
[   13.336331] ata26: SATA max UDMA/133 abar m2048@0xb8c00000 port 0xb8c00180 irq 1301 lpm-pol 0
[   13.345843] ata27: SATA max UDMA/133 abar m2048@0xb8c00000 port 0xb8c00200 irq 1302 lpm-pol 0
[   13.355356] ata28: SATA max UDMA/133 abar m2048@0xb8c00000 port 0xb8c00280 irq 1303 lpm-pol 0
[   13.364867] ata29: SATA max UDMA/133 abar m2048@0xb8c00000 port 0xb8c00300 irq 1304 lpm-pol 0
[   13.374378] ata30: SATA max UDMA/133 abar m2048@0xb8c00000 port 0xb8c00380 irq 1305 lpm-pol 0
[   13.383890] ata31: SATA max UDMA/133 abar m2048@0xb8c00000 port 0xb8c00400 irq 1306 lpm-pol 0
[   13.393402] ata32: SATA max UDMA/133 abar m2048@0xb8c00000 port 0xb8c00480 irq 1307 lpm-pol 0
[   13.394412] ata9: SATA link down (SStatus 0 SControl 300)
[   13.571068] ata17: SATA link down (SStatus 0 SControl 300)
[   13.575198] ata2: SATA link down (SStatus 0 SControl 300)
[   13.715180] ata25: SATA link down (SStatus 0 SControl 300)
[   13.895145] ata3: SATA link down (SStatus 0 SControl 300)
[   14.211252] ata4: SATA link down (SStatus 0 SControl 300)
[   14.527142] ata5: SATA link down (SStatus 0 SControl 300)
[   14.843180] ata6: SATA link down (SStatus 0 SControl 300)
[   15.159267] ata7: SATA link down (SStatus 0 SControl 300)
[   15.475262] ata8: SATA link down (SStatus 0 SControl 300)
[   15.791268] ata10: SATA link down (SStatus 0 SControl 300)
[   16.107224] ata11: SATA link down (SStatus 0 SControl 300)
[   16.423291] ata12: SATA link down (SStatus 0 SControl 300)
[   16.739265] ata13: SATA link down (SStatus 0 SControl 300)
[   17.055247] ata14: SATA link down (SStatus 0 SControl 300)
[   17.371238] ata15: SATA link down (SStatus 0 SControl 300)
[   17.687261] ata16: SATA link down (SStatus 0 SControl 300)
[   18.003121] ata18: SATA link down (SStatus 0 SControl 300)
[   18.319275] ata19: SATA link down (SStatus 0 SControl 300)
[   18.635246] ata20: SATA link down (SStatus 0 SControl 300)
[   18.951318] ata21: SATA link down (SStatus 0 SControl 300)
[   19.267215] ata22: SATA link down (SStatus 0 SControl 300)
[   19.583228] ata23: SATA link down (SStatus 0 SControl 300)
[   19.899285] ata24: SATA link down (SStatus 0 SControl 300)
[   20.215227] ata26: SATA link down (SStatus 0 SControl 300)
[   20.531264] ata27: SATA link down (SStatus 0 SControl 300)
[   20.847274] ata28: SATA link down (SStatus 0 SControl 300)
[   21.163253] ata29: SATA link down (SStatus 0 SControl 300)
[   21.479289] ata30: SATA link down (SStatus 0 SControl 300)
[   21.795254] ata31: SATA link down (SStatus 0 SControl 300)
[   22.111226] ata32: SATA link down (SStatus 0 SControl 300)
[   22.118979] tg3 0000:a6:00.0 enp166s0: renamed from eth0

Timed out for waiting the udev queue being empty. Timed out for waiting the udev queue being empty. Timed out for waiting the udev queue being empty.
Begin: Loading essential drivers ... [ 374.506692] raid6: avx512x4 gen() 82845 MB/s

[  374.578692] raid6: avx512x2 gen() 88565 MB/s
[  374.650692] raid6: avx512x1 gen() 84341 MB/s
[  374.722693] raid6: avx2x4   gen() 65308 MB/s
[  374.794692] raid6: avx2x2   gen() 72850 MB/s
[  374.866693] raid6: avx2x1   gen() 64208 MB/s
[  374.871452] raid6: using algorithm avx512x2 gen() 88565 MB/s
[  374.942693] raid6: .... xor() 53109 MB/s, rmw enabled
[  374.948325] raid6: using avx512x2 recovery algorithm
[  374.954638] xor: automatically using best checksumming function   avx       
[  374.963680] async_tx: api initialized (async)

done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... [ 375.049556] Btrfs loaded, zoned=yes, fsverity=yes
Scanning for Btrfs filesystems
done.
Begin: Will now check root file system ... fsck from util-linux 2.39.3
[/usr/sbin/fsck.ext4 (1) -- /dev/nvme1n1p2] fsck.ext4 -a[ 405.104938] EXT4-fs (nvme1n1p2): mounted filesystem b44dba70-a64a-4130-8e91-bec73006bf60 ro with ordered data mode. Quota mode: none.
-C0 /dev/nvme1n1p2
/dev/nvme1n1p2: clean, 210802/67108864 files, 10603223/268435456 blocks
done.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... Timed out for waiting the udev queue being empty.
done.

[  526.200142] systemd[1]: Inserted module 'autofs4'

client_loop: send disconnect: Broken pipe
client_loop: send disconnect: Broken pipe
client_loop: send disconnect: Broken pipe
client_loop: send disconnect: Broken pipe
client_loop: send disconnect: Broken pipe
client_loop: send disconnect: Broken pipe
Connection to purico-643f.amd.com closed. Timed out for waiting the udev queue being empty. Timed out for waiting the udev queue being empty.

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 6.11.0-rc6 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0" CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=110400
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y CONFIG_GCC_ASM_GOTO_OUTPUT_BROKEN=y CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y CONFIG_PAHOLE_VERSION=125
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_KERNEL_ZSTD=y
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set

# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST_IDLE=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=125

# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
CONFIG_BPF_LSM=y

# end of BPF subsystem

CONFIG_PREEMPT_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
CONFIG_PREEMPT_DYNAMIC=y
CONFIG_SCHED_CORE=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set

# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_NEED_TASKS_RCU=y
CONFIG_TASKS_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y

# end of RCU Subsystem

CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
# CONFIG_PRINTK_INDEX is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
CONFIG_UCLAMP_TASK=y
CONFIG_UCLAMP_BUCKETS_COUNT=5

# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y CONFIG_CC_HAS_INT128=y CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" CONFIG_GCC10_NO_ARRAY_BOUNDS=y CONFIG_CC_NO_ARRAY_BOUNDS=y CONFIG_GCC_NO_STRINGOP_OVERFLOW=y CONFIG_CC_NO_STRINGOP_OVERFLOW=y CONFIG_ARCH_SUPPORTS_INT128=y CONFIG_NUMA_BALANCING=y CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y CONFIG_SLAB_OBJ_EXT=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set CONFIG_MEMCG=y
# CONFIG_MEMCG_V1 is not set
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set CONFIG_SCHED_MM_CID=y
CONFIG_UCLAMP_TASK_GROUP=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
# CONFIG_CPUSETS_V1 is not set CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
# CONFIG_CGROUP_DEBUG is not set CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y CONFIG_SCHED_AUTOGROUP=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
# CONFIG_BOOT_CONFIG_FORCE is not set
# CONFIG_BOOT_CONFIG_EMBED is not set CONFIG_INITRAMFS_PRESERVE_MTIME=y CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_LD_ORPHAN_WARN=y CONFIG_LD_ORPHAN_WARN_LEVEL="warn" CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_BASE_SMALL is not set
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set CONFIG_CACHESTAT_SYSCALL=y
CONFIG_PC104=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y CONFIG_HAVE_PERF_EVENTS=y CONFIG_GUEST_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set

# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y

#
# Kexec and crash features
#
CONFIG_CRASH_RESERVE=y
CONFIG_VMCORE_INFO=y
CONFIG_KEXEC_CORE=y
CONFIG_HAVE_IMA_KEXEC=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_KEXEC_SIG=y
# CONFIG_KEXEC_SIG_FORCE is not set
CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y
CONFIG_KEXEC_JUMP=y
CONFIG_CRASH_DUMP=y
CONFIG_CRASH_HOTPLUG=y
CONFIG_CRASH_MAX_MEMORY_RANGES=8192

# end of Kexec and crash features
# end of General setup

CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_AUDIT_ARCH=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DYNAMIC_PHYSICAL_MASK=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_X2APIC=y
# CONFIG_X86_POSTED_MSI is not set
CONFIG_X86_MPPARSE=y
CONFIG_X86_CPU_RESCTRL=y
# CONFIG_X86_FRED is not set
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_NUMACHIP=y
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=y
CONFIG_IOSF_MBI_DEBUG=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_XXL=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_X86_HV_CALLBACK_VECTOR=y
CONFIG_XEN=y
CONFIG_XEN_PV=y
CONFIG_XEN_512GB=y
CONFIG_XEN_PV_SMP=y
CONFIG_XEN_PV_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_PVHVM_SMP=y
CONFIG_XEN_PVHVM_GUEST=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
CONFIG_XEN_PVH=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PV_MSR_SAFE=y
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
CONFIG_PVH=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_JAILHOUSE_GUEST=y
CONFIG_ACRN_GUEST=y
# CONFIG_INTEL_TDX_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_HAVE_PAE=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_BOOT_VESA_SUPPORT=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS_RANGE_BEGIN=8192
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
CONFIG_SCHED_CLUSTER=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_ACPI_MADT_WAKEUP=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=m
# CONFIG_PERF_EVENTS_INTEL_CSTATE is not set
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_PERF_EVENTS_AMD_UNCORE is not set
# CONFIG_PERF_EVENTS_AMD_BRS is not set

# end of Performance monitoring

CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_LATE_LOADING is not set
CONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set
CONFIG_X86_5LEVEL=y
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
CONFIG_X86_MEM_ENCRYPT=y
CONFIG_AMD_MEM_ENCRYPT=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_X86_UMIP=y
CONFIG_CC_HAS_IBT=y
CONFIG_X86_CET=y
CONFIG_X86_KERNEL_IBT=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
CONFIG_X86_SGX=y
# CONFIG_X86_USER_SHADOW_STACK is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_HANDOVER_PROTOCOL=y
CONFIG_EFI_MIXED=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_ARCH_SUPPORTS_KEXEC=y
CONFIG_ARCH_SUPPORTS_KEXEC_FILE=y
CONFIG_ARCH_SELECTS_KEXEC_FILE=y
CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY=y
CONFIG_ARCH_SUPPORTS_KEXEC_SIG=y
CONFIG_ARCH_SUPPORTS_KEXEC_SIG_FORCE=y
CONFIG_ARCH_SUPPORTS_KEXEC_BZIMAGE_VERIFY_SIG=y
CONFIG_ARCH_SUPPORTS_KEXEC_JUMP=y
CONFIG_ARCH_SUPPORTS_CRASH_DUMP=y
CONFIG_ARCH_SUPPORTS_CRASH_HOTPLUG=y
CONFIG_ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa
# CONFIG_ADDRESS_MASKING is not set
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_XONLY=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y
CONFIG_X86_BUS_LOCK_DETECT=y

# end of Processor type and features

CONFIG_CC_HAS_NAMED_AS=y
CONFIG_USE_X86_SEG_SUPPORT=y
CONFIG_CC_HAS_SLS=y
CONFIG_CC_HAS_RETURN_THUNK=y
CONFIG_CC_HAS_ENTRY_PADDING=y
CONFIG_FUNCTION_PADDING_CFI=11
CONFIG_FUNCTION_PADDING_BYTES=16
CONFIG_CALL_PADDING=y
CONFIG_HAVE_CALL_THUNKS=y
CONFIG_CALL_THUNKS=y
CONFIG_PREFIX_SYMBOLS=y
CONFIG_CPU_MITIGATIONS=y
CONFIG_MITIGATION_PAGE_TABLE_ISOLATION=y
CONFIG_MITIGATION_RETPOLINE=y
CONFIG_MITIGATION_RETHUNK=y
CONFIG_MITIGATION_UNRET_ENTRY=y
CONFIG_MITIGATION_CALL_DEPTH_TRACKING=y
# CONFIG_CALL_THUNKS_DEBUG is not set
CONFIG_MITIGATION_IBPB_ENTRY=y
CONFIG_MITIGATION_IBRS_ENTRY=y
CONFIG_MITIGATION_SRSO=y
# CONFIG_MITIGATION_SLS is not set
CONFIG_MITIGATION_GDS=y
CONFIG_MITIGATION_RFDS=y
CONFIG_MITIGATION_SPECTRE_BHI=y
CONFIG_MITIGATION_MDS=y
CONFIG_MITIGATION_TAA=y
CONFIG_MITIGATION_MMIO_STALE_DATA=y
CONFIG_MITIGATION_L1TF=y
CONFIG_MITIGATION_RETBLEED=y
CONFIG_MITIGATION_SPECTRE_V1=y
CONFIG_MITIGATION_SPECTRE_V2=y
CONFIG_MITIGATION_SRBDS=y
CONFIG_MITIGATION_SSB=y
CONFIG_ARCH_HAS_ADD_PAGES=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_HIBERNATION_COMP_LZO=y
CONFIG_HIBERNATION_DEF_COMP="lzo"
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ENERGY_MODEL=y
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
CONFIG_ACPI_THERMAL_LIB=y
CONFIG_ACPI_DEBUGGER=y
CONFIG_ACPI_DEBUGGER_USER=y
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_FPDT=y
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_TAD is not set
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_PLATFORM_PROFILE=m
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_HMAT=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
CONFIG_ACPI_DPTF=y
# CONFIG_DPTF_POWER is not set
# CONFIG_DPTF_PCH_FIVR is not set
CONFIG_ACPI_WATCHDOG=y
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_ACPI_PFRUT is not set
CONFIG_ACPI_PCC=y
# CONFIG_ACPI_FFH is not set
CONFIG_PMIC_OPREGION=y
CONFIG_BYTCRC_PMIC_OPREGION=y
CONFIG_CHTCRC_PMIC_OPREGION=y
CONFIG_CHT_WC_PMIC_OPREGION=y
CONFIG_ACPI_VIOT=y
CONFIG_ACPI_PRMT=y
CONFIG_X86_PM_TIMER=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_ATTR_SET=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_AMD_PSTATE=y
CONFIG_X86_AMD_PSTATE_DEFAULT_MODE=3
# CONFIG_X86_AMD_PSTATE_UT is not set
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
# CONFIG_X86_P4_CLOCKMOD is not set

#

# shared options
#
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=y
CONFIG_CPU_IDLE_GOV_HALTPOLL=y
# CONFIG_HALTPOLL_CPUIDLE is not set

# end of CPU Idle

CONFIG_INTEL_IDLE=y

# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_MMCONF_FAM10H=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_ISA_BUS=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y

# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_EMULATION_DEFAULT_DISABLED is not set # CONFIG_X86_X32_ABI is not set CONFIG_COMPAT_32=y
CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y

# end of Binary Emulations

CONFIG_KVM_COMMON=y
CONFIG_HAVE_KVM_PFNCACHE=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_DIRTY_RING=y
CONFIG_HAVE_KVM_DIRTY_RING_TSO=y
CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_READONLY_MEM=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_GENERIC_PRE_FAULT_MEMORY=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_HAVE_KVM_PM_NOTIFIER=y
CONFIG_KVM_GENERIC_HARDWARE_ENABLING=y
CONFIG_KVM_GENERIC_MMU_NOTIFIER=y
CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES=y
CONFIG_KVM_PRIVATE_MEM=y
CONFIG_KVM_GENERIC_PRIVATE_MEM=y
CONFIG_HAVE_KVM_ARCH_GMEM_PREPARE=y
CONFIG_HAVE_KVM_ARCH_GMEM_INVALIDATE=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_WERROR=y
# CONFIG_KVM_SW_PROTECTED_VM is not set
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=m
CONFIG_KVM_AMD_SEV=y
CONFIG_KVM_SMM=y
CONFIG_KVM_HYPERV=y
CONFIG_KVM_XEN=y
# CONFIG_KVM_PROVE_MMU is not set
CONFIG_KVM_MAX_NR_VCPUS=4096
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y
CONFIG_AS_GFNI=y
CONFIG_AS_VAES=y
CONFIG_AS_VPCLMULQDQ=y
CONFIG_AS_WRUSS=y
CONFIG_ARCH_CONFIGURES_CPU_MITIGATIONS=y

#
# General architecture-dependent options
#
CONFIG_HOTPLUG_SMT=y
CONFIG_HOTPLUG_CORE_SYNC=y
CONFIG_HOTPLUG_CORE_SYNC_DEAD=y
CONFIG_HOTPLUG_CORE_SYNC_FULL=y
CONFIG_HOTPLUG_SPLIT_STARTUP=y
CONFIG_HOTPLUG_PARALLEL=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_KRETPROBE_ON_RETHOOK=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_ARCH_HAS_CPU_FINALIZE_INIT=y
CONFIG_ARCH_HAS_CPU_PASID=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_RUST=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_MMU_LAZY_TLB_REFCOUNT=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_HAVE_EXTRA_ELF_NOTES=y
CONFIG_ARCH_HAS_NMI_SAFE_THIS_CPU_OPS=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_ARCH_SUPPORTS_CFI_CLANG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_CONTEXT_TRACKING_USER_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_PMD_MKWRITE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_PAGE_SIZE_4KB=y
CONFIG_PAGE_SIZE_4KB=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_PAGE_SHIFT=12
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_JUMP_LABEL_HACK=y
CONFIG_HAVE_NOINSTR_HACK=y
CONFIG_HAVE_NOINSTR_VALIDATION=y
CONFIG_HAVE_UACCESS_VALIDATION=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_ARCH_HAS_CC_PLATFORM=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y
CONFIG_HAVE_ARCH_NODE_DEV_GROUP=y
CONFIG_ARCH_HAS_HW_PTE_YOUNG=y
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y
CONFIG_ARCH_HAS_KERNEL_FPU_SUPPORT=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y

# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_FUNCTION_ALIGNMENT_4B=y
CONFIG_FUNCTION_ALIGNMENT_16B=y
CONFIG_FUNCTION_ALIGNMENT=16

# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
# CONFIG_MODULE_DEBUG is not set
# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set CONFIG_MODULE_SIG_SHA512=y
# CONFIG_MODULE_SIG_SHA3_256 is not set
# CONFIG_MODULE_SIG_SHA3_384 is not set
# CONFIG_MODULE_SIG_SHA3_512 is not set CONFIG_MODULE_SIG_HASH="sha512"
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y CONFIG_BLK_RQ_ALLOC_TIME=y CONFIG_BLK_CGROUP_RWSTAT=y CONFIG_BLK_CGROUP_PUNT_BIO=y CONFIG_BLK_DEV_BSG_COMMON=y CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_WRITE_MOUNTED=y CONFIG_BLK_DEV_ZONED=y CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_FC_APPID is not set CONFIG_BLK_CGROUP_IOCOST=y CONFIG_BLK_CGROUP_IOPRIO=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_SED_OPAL=y CONFIG_BLK_INLINE_ENCRYPTION=y CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_CMDLINE_PARTITION=y

# end of Partition Types

CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set

# end of IO Schedulers

CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y

# end of Executable file formats

#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_DEFAULT_ON is not set
# CONFIG_ZSWAP_SHRINKER_DEFAULT_ON is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo" CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set # CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud" CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_STAT is not set CONFIG_ZSMALLOC_CHAIN_SIZE=8

#
# Slab allocator options
#
CONFIG_SLUB=y
# CONFIG_SLUB_TINY is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLAB_BUCKETS=y
# CONFIG_SLUB_STATS is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_RANDOM_KMALLOC_CACHES is not set

# end of Slab allocator options

CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_ARCH_WANT_OPTIMIZE_DAX_VMEMMAP=y
CONFIG_ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP=y
CONFIG_HAVE_GUP_FAST=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_MHP_MEMMAP_ON_MEMORY=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
CONFIG_SPLIT_PTE_PTLOCKS=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_SPLIT_PMD_PTLOCKS=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_DEVICE_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PCP_BATCH_SCALE_MAX=5
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
# CONFIG_TRANSPARENT_HUGEPAGE_NEVER is not set
CONFIG_THP_SWAP=y
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_PGTABLE_HAS_HUGE_LEAVES=y
CONFIG_ARCH_SUPPORTS_HUGE_PFNMAP=y
CONFIG_ARCH_SUPPORTS_PMD_PFNMAP=y
CONFIG_ARCH_SUPPORTS_PUD_PFNMAP=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_CMA is not set
CONFIG_MEM_SOFT_DIRTY=y
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_ZONE_DEVICE=y
CONFIG_GET_FREE_REGION=y
CONFIG_DEVICE_PRIVATE=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_ARCH_USES_PG_ARCH_2=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_DMAPOOL_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_MEMFD_CREATE=y
CONFIG_SECRETMEM=y
CONFIG_ANON_VMA_NAME=y
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_USERFAULTFD=y
CONFIG_PTE_MARKER_UFFD_WP=y
# CONFIG_LRU_GEN is not set
CONFIG_ARCH_SUPPORTS_PER_VMA_LOCK=y
CONFIG_PER_VMA_LOCK=y
CONFIG_LOCK_MM_AND_FIND_VMA=y
CONFIG_IOMMU_MM_DATA=y
CONFIG_EXECMEM=y
CONFIG_NUMA_MEMBLKS=y
# CONFIG_NUMA_EMU is not set

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set

# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_XGRESS=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_XDP_SOCKETS=y
# CONFIG_XDP_SOCKETS_DIAG is not set
CONFIG_NET_HANDSHAKE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_FOU is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TABLE_PERTURB_ORDER=16
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_SIGPOOL=y
# CONFIG_TCP_AO is not set
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_IPV6_VTI is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_SEG6_BPF=y
# CONFIG_IPV6_RPL_LWTUNNEL is not set
CONFIG_IPV6_IOAM6_LWTUNNEL=y
CONFIG_NETLABEL=y
CONFIG_MPTCP=y
CONFIG_MPTCP_IPV6=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
# CONFIG_BRIDGE_NETFILTER is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_BPF_LINK=y
CONFIG_NETFILTER_NETLINK_HOOK=y
CONFIG_NETFILTER_NETLINK_ACCT=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NETFILTER_NETLINK_OSF=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_SYSLOG=y
CONFIG_NETFILTER_CONNCOUNT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
# CONFIG_NF_CONNTRACK_PROCFS is not set
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_SNMP=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NF_CT_NETLINK_TIMEOUT=y
CONFIG_NF_CT_NETLINK_HELPER=y
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_SIP=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=y
CONFIG_NF_TABLES=y
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=y
CONFIG_NFT_CT=y
CONFIG_NFT_FLOW_OFFLOAD=y
CONFIG_NFT_CONNLIMIT=y
CONFIG_NFT_LOG=y
CONFIG_NFT_LIMIT=y
CONFIG_NFT_MASQ=y
CONFIG_NFT_REDIR=y
CONFIG_NFT_NAT=y
CONFIG_NFT_TUNNEL=y
CONFIG_NFT_QUEUE=y
CONFIG_NFT_QUOTA=y
CONFIG_NFT_REJECT=y
CONFIG_NFT_REJECT_INET=y
CONFIG_NFT_COMPAT=y
CONFIG_NFT_HASH=y
CONFIG_NFT_FIB=y
CONFIG_NFT_FIB_INET=y
CONFIG_NFT_SOCKET=y
CONFIG_NFT_OSF=y
CONFIG_NFT_TPROXY=y
CONFIG_NFT_SYNPROXY=y
CONFIG_NF_DUP_NETDEV=y
CONFIG_NFT_DUP_NETDEV=y
CONFIG_NFT_FWD_NETDEV=y
CONFIG_NFT_FIB_NETDEV=y
CONFIG_NFT_REJECT_NETDEV=y
CONFIG_NF_FLOW_TABLE_INET=y
CONFIG_NF_FLOW_TABLE=y
# CONFIG_NF_FLOW_TABLE_PROCFS is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XTABLES_COMPAT=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=y
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=y
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
CONFIG_NETFILTER_XT_TARGET_LED=y
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_NAT=y
CONFIG_NETFILTER_XT_TARGET_NETMAP=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_REDIRECT=y
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=y
CONFIG_NETFILTER_XT_TARGET_TEE=y
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
CONFIG_NETFILTER_XT_MATCH_BPF=y
CONFIG_NETFILTER_XT_MATCH_CGROUP=y
CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=y
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_CPU=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ECN=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPCOMP=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_L2TP=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_RECENT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_SOCKET=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y

# end of Core Netfilter Configuration

# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_IP_NF_IPTABLES_LEGACY=y
CONFIG_NF_SOCKET_IPV4=y
CONFIG_NF_TPROXY_IPV4=y
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=y
CONFIG_NFT_DUP_IPV4=y
CONFIG_NFT_FIB_IPV4=y
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=y
CONFIG_NF_LOG_ARP=y
CONFIG_NF_LOG_IPV4=y
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_SNMP_BASIC=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_NFT_COMPAT_ARP=y
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=y
CONFIG_NF_TPROXY_IPV6=y
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=y
CONFIG_NFT_DUP_IPV6=y
CONFIG_NFT_FIB_IPV6=y
CONFIG_NF_DUP_IPV6=y
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
# CONFIG_IP6_NF_MATCH_AH is not set
# CONFIG_IP6_NF_MATCH_EUI64 is not set
# CONFIG_IP6_NF_MATCH_FRAG is not set
# CONFIG_IP6_NF_MATCH_OPTS is not set
# CONFIG_IP6_NF_MATCH_HL is not set
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
# CONFIG_IP6_NF_MATCH_MH is not set
# CONFIG_IP6_NF_MATCH_RPFILTER is not set
# CONFIG_IP6_NF_MATCH_RT is not set
# CONFIG_IP6_NF_MATCH_SRH is not set
# CONFIG_IP6_NF_FILTER is not set
# CONFIG_IP6_NF_TARGET_REJECT is not set
# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
# CONFIG_IP6_NF_MANGLE is not set
# CONFIG_IP6_NF_RAW is not set
# CONFIG_IP6_NF_SECURITY is not set
# CONFIG_IP6_NF_NAT is not set
# CONFIG_IP6_NF_TARGET_NPT is not set

# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_TABLES_BRIDGE=y
CONFIG_NFT_BRIDGE_META=y
CONFIG_NFT_BRIDGE_REJECT=y
CONFIG_NF_CONNTRACK_BRIDGE=y
CONFIG_BRIDGE_NF_EBTABLES_LEGACY=y
CONFIG_BRIDGE_NF_EBTABLES=y
# CONFIG_BRIDGE_EBT_BROUTE is not set
# CONFIG_BRIDGE_EBT_T_FILTER is not set
CONFIG_BRIDGE_EBT_T_NAT=y
# CONFIG_BRIDGE_EBT_802_3 is not set
# CONFIG_BRIDGE_EBT_AMONG is not set
# CONFIG_BRIDGE_EBT_ARP is not set
# CONFIG_BRIDGE_EBT_IP is not set
# CONFIG_BRIDGE_EBT_IP6 is not set
# CONFIG_BRIDGE_EBT_LIMIT is not set
# CONFIG_BRIDGE_EBT_MARK is not set
# CONFIG_BRIDGE_EBT_PKTTYPE is not set
# CONFIG_BRIDGE_EBT_STP is not set
# CONFIG_BRIDGE_EBT_VLAN is not set
# CONFIG_BRIDGE_EBT_ARPREPLY is not set
CONFIG_BRIDGE_EBT_DNAT=y
# CONFIG_BRIDGE_EBT_MARK_T is not set
# CONFIG_BRIDGE_EBT_REDIRECT is not set
CONFIG_BRIDGE_EBT_SNAT=y
# CONFIG_BRIDGE_EBT_LOG is not set
# CONFIG_BRIDGE_EBT_NFLOG is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_SKBPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_CAKE is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_ETS is not set
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_NAT=y
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_MPLS is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_CTINFO is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
# CONFIG_NET_ACT_CT is not set
# CONFIG_NET_ACT_GATE is not set
CONFIG_NET_TC_SKB_EXT=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
CONFIG_MPLS=y
# CONFIG_NET_MPLS_GSO is not set
# CONFIG_MPLS_ROUTING is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
CONFIG_NET_NCSI=y
CONFIG_NCSI_OEM_CMD_GET_MAC=y
# CONFIG_NCSI_OEM_CMD_KEEP_PHY is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_MAX_SKB_FRAGS=17
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NET_DROP_MONITOR=y

# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
CONFIG_MCTP=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
CONFIG_HAVE_PCI=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
CONFIG_PCIE_PTM=y
# CONFIG_PCIE_EDR is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_PF_STUB is not set
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCI_P2PDMA is not set
CONFIG_PCI_LABEL=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
CONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not set
# CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# PCI controller drivers
#
# CONFIG_VMD is not set

#
# Cadence-based PCIe controllers
#

# end of Cadence-based PCIe controllers

#
# DesignWare-based PCIe controllers
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_EP=y
# CONFIG_PCI_MESON is not set
CONFIG_PCIE_DW_PLAT=y
CONFIG_PCIE_DW_PLAT_HOST=y
CONFIG_PCIE_DW_PLAT_EP=y

# end of DesignWare-based PCIe controllers

#
# Mobiveil-based PCIe controllers
#

# end of Mobiveil-based PCIe controllers

#
# PLDA-based PCIe controllers
#

# end of PLDA-based PCIe controllers
# end of PCI controller drivers

#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
# CONFIG_PCI_EPF_TEST is not set
# CONFIG_PCI_EPF_NTB is not set

# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set

# end of PCI switch controller drivers

# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
CONFIG_RAPIDIO=y
# CONFIG_RAPIDIO_TSI721 is not set
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DMA_ENGINE=y
# CONFIG_RAPIDIO_DEBUG is not set
# CONFIG_RAPIDIO_ENUM_BASIC is not set
# CONFIG_RAPIDIO_CHMAN is not set
# CONFIG_RAPIDIO_MPORT_CDEV is not set

#
# RapidIO Switch drivers
#
# CONFIG_RAPIDIO_CPS_XX is not set
# CONFIG_RAPIDIO_CPS_GEN2 is not set
# CONFIG_RAPIDIO_RXS_GEN3 is not set

# end of RapidIO Switch drivers

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y CONFIG_FW_LOADER_DEBUG=y CONFIG_FW_LOADER_PAGED_BUF=y CONFIG_FW_LOADER_SYSFS=y CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set CONFIG_FW_LOADER_COMPRESS=y CONFIG_FW_LOADER_COMPRESS_XZ=y
# CONFIG_FW_LOADER_COMPRESS_ZSTD is not set CONFIG_FW_CACHE=y
# CONFIG_FW_UPLOAD is not set

# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_HMEM_REPORTING=y
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_DEVICES=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set

# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set

# end of Bus devices

#
# Cache Drivers
#

# end of Cache Drivers

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol #

# end of ARM System Control and Management Interface Protocol

CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not set
# CONFIG_FW_CFG_SYSFS is not set
CONFIG_SYSFB=y
# CONFIG_SYSFB_SIMPLEFB is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support #
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=m
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set CONFIG_EFI_SOFT_RESERVE=y CONFIG_EFI_DXE_MEM_ATTRIBUTES=y CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set # CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set CONFIG_EFI_DEV_PATH_PARSER=y CONFIG_APPLE_PROPERTIES=y CONFIG_RESET_ATTACK_MITIGATION=y CONFIG_EFI_RCI2_TABLE=y
# CONFIG_EFI_DISABLE_PCI_DMA is not set CONFIG_EFI_EARLYCON=y CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
# CONFIG_EFI_DISABLE_RUNTIME is not set
# CONFIG_EFI_COCO_SECRET is not set CONFIG_UNACCEPTED_MEMORY=y

# end of EFI (Extensible Firmware Interface) Support

CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y

#
# Qualcomm firmware drivers
#

# end of Qualcomm firmware drivers

#
# Tegra firmware driver
#

# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
CONFIG_ZRAM_DEF_COMP="unset-value"
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
# CONFIG_XEN_BLKDEV_BACKEND is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_VERBOSE_ERRORS is not set
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
CONFIG_NVME_TCP=y
# CONFIG_NVME_TCP_TLS is not set
# CONFIG_NVME_HOST_AUTH is not set
CONFIG_NVME_TARGET=y
# CONFIG_NVME_TARGET_DEBUGFS is not set
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=y
CONFIG_NVME_TARGET_FC=y
# CONFIG_NVME_TARGET_FCLOOP is not set
CONFIG_NVME_TARGET_TCP=y
# CONFIG_NVME_TARGET_TCP_TLS is not set
# CONFIG_NVME_TARGET_AUTH is not set

# end of NVME Support

#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_RPMB is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_SGI_XP is not set
# CONFIG_HP_ILO is not set
# CONFIG_SGI_GRU is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
CONFIG_SRAM=y
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_NSM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set

# end of EEPROM support

# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline #
# CONFIG_TI_ST is not set

# end of Texas Instruments shared transport line discipline

# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
# CONFIG_VMWARE_VMCI is not set
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_UACCE is not set
CONFIG_PVPANIC=y
# CONFIG_PVPANIC_MMIO is not set
# CONFIG_PVPANIC_PCI is not set
# CONFIG_GP_PCI1XXXX is not set
# CONFIG_KEBA_CP500 is not set

# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set

# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_XEN_SCSI_FRONTEND is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
# CONFIG_SCSI_DH_HP_SW is not set
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m

# end of SCSI device support

CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_AHCI_DWC is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_BITMAP_FILE=y
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_UNSTRIPED is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_EBS is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_MULTIPATH_HST is not set
# CONFIG_DM_MULTIPATH_IOA is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
CONFIG_DM_INIT=y
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_DM_ZONED is not set
CONFIG_DM_AUDIT=y
# CONFIG_DM_VDO is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set

# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=m
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_PFCP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_RIONET is not set
CONFIG_TUN=y
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_NETKIT is not set
# CONFIG_NET_VRF is not set
# CONFIG_ARCNET is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL3 is not set
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
# CONFIG_PDS_CORE is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_CX_ECAT is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
CONFIG_TIGON3=m
CONFIG_TIGON3_HWMON=y
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_CAVIUM_PTP is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CIRRUS=y
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DM9051 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not set
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_E1000E_HWTS=y
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
# CONFIG_IDPF is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_ADI=y
# CONFIG_ADIN1110 is not set
CONFIG_NET_VENDOR_LITEX=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_OCTEON_EP is not set
# CONFIG_OCTEON_EP_VF is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_META=y
# CONFIG_FBNIC is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
# CONFIG_VCAP is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=y
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_ROCKER is not set
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
# CONFIG_SFC_SIENA is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
# CONFIG_TEHUTI_TN40 is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WANGXUN=y
# CONFIG_NGBE is not set
# CONFIG_TXGBE is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_LL_TEMAC is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_LED_TRIGGER_PHY=y
CONFIG_FIXED_PHY=y

#
# MII PHY device drivers
#
# CONFIG_AIR_EN8811H_PHY is not set
# CONFIG_AMD_PHY is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_ADIN1100_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM84881_PHY=y
# CONFIG_BCM87XX_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88Q2XXX_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_T1S_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_MOTORCOMM_PHY is not set
CONFIG_NATIONAL_PHY=y
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_NCN26000_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_QCA83XX_PHY is not set
# CONFIG_QCA808X_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
# CONFIG_DP83TD510_PHY is not set
# CONFIG_DP83TG720_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PSE_CONTROLLER is not set

#
# MCTP Device Drivers
#
# CONFIG_MCTP_SERIAL is not set

# end of MCTP Device Drivers

CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_ACPI_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_THUNDER is not set

#
# MDIO Multiplexers
#

#
# PCS device drivers
#
# CONFIG_PCS_XPCS is not set

# end of PCS device drivers

CONFIG_PPP=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_FILTER=y
# CONFIG_PPP_MPPE is not set
CONFIG_PPP_MULTILINK=y
# CONFIG_PPPOE is not set
CONFIG_PPPOE_HASH_BITS=4
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_USB_NET_DRIVERS is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K_PCI=y
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_SILABS=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
CONFIG_WAN=y
# CONFIG_HDLC is not set
# CONFIG_FRAMER is not set

#
# Wireless WAN
#
CONFIG_WWAN=y
CONFIG_WWAN_DEBUGFS=y
# CONFIG_WWAN_HWSIM is not set
# CONFIG_IOSM is not set
# CONFIG_MTK_T7XX is not set

# end of Wireless WAN

CONFIG_XEN_NETDEV_FRONTEND=y
# CONFIG_XEN_NETDEV_BACKEND is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
CONFIG_ISDN=y
# CONFIG_MISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_APPLESPI is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_PINEPHONE is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_TWL4030 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_JOYSTICK_PSXPAD_SPI is not set
# CONFIG_JOYSTICK_PXRC is not set
# CONFIG_JOYSTICK_QWIIC is not set
# CONFIG_JOYSTICK_FSIA6B is not set
# CONFIG_JOYSTICK_SENSEHAT is not set
# CONFIG_JOYSTICK_SEESAW is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_88PM860X is not set
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
# CONFIG_TOUCHSCREEN_CY8CTMA140 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP5 is not set
# CONFIG_TOUCHSCREEN_DA9034 is not set
# CONFIG_TOUCHSCREEN_DA9052 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_EXC3000 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C is not set
# CONFIG_TOUCHSCREEN_GOODIX_BERLIN_SPI is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_HYCON_HY46XX is not set
# CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_ILITEK is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
CONFIG_TOUCHSCREEN_ELAN=y
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MSG2638 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_NOVATEK_NVT_TS is not set
# CONFIG_TOUCHSCREEN_IMAGIS is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM831X is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_PCAP is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
# CONFIG_TOUCHSCREEN_IQS5XX is not set
# CONFIG_TOUCHSCREEN_IQS7211 is not set
# CONFIG_TOUCHSCREEN_ZINITIX is not set
# CONFIG_TOUCHSCREEN_HIMAX_HX83112B is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_88PM860X_ONKEY is not set
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MAX77693_HAPTIC is not set
# CONFIG_INPUT_MAX8925_ONKEY is not set
# CONFIG_INPUT_MAX8997_HAPTIC is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_GPIO_VIBRA is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
# CONFIG_INPUT_RETU_PWRBUTTON is not set
# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
# CONFIG_INPUT_TWL4030_VIBRA is not set
# CONFIG_INPUT_TWL6040_VIBRA is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PALMAS_PWRBUTTON is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_PWM_VIBRA is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_DA9052_ONKEY is not set
# CONFIG_INPUT_DA9055_ONKEY is not set
# CONFIG_INPUT_DA9063_ONKEY is not set
# CONFIG_INPUT_WM831X_ON is not set
# CONFIG_INPUT_PCAP is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_XEN_KBDDEV_FRONTEND is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_INPUT_RAVE_SP_PWRBUTTON is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
CONFIG_LEGACY_TIOCSTI=y
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_16550A_VARIANTS=y CONFIG_SERIAL_8250_FINTEK=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCILIB=y CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_EXAR is not set
# CONFIG_SERIAL_8250_MEN_MCB is not set CONFIG_SERIAL_8250_NR_UARTS=48 CONFIG_SERIAL_8250_RUNTIME_UARTS=32 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_PCI1XXXX is not set CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set CONFIG_SERIAL_8250_RT288X=y
# CONFIG_SERIAL_8250_LPSS is not set
# CONFIG_SERIAL_8250_MID is not set
# CONFIG_SERIAL_8250_PERICOM is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_KGDB_NMI=y
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_MAX310X=y
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_LANTIQ is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_MEN_Z135 is not set
# CONFIG_SERIAL_SPRD is not set

# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_TTY_PRINTK=y
CONFIG_TTY_PRINTK_LEVEL=6
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
# CONFIG_IPMI_POWEROFF is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_BA431 is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
# CONFIG_NVRAM is not set
CONFIG_DEVPORT=y
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_UV_MMTIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TPM2_HMAC=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C is not set
# CONFIG_TCG_TIS_I2C_CR50 is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
# CONFIG_TCG_XEN is not set
CONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
# CONFIG_TELCLOCK is not set
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set

# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_CHT_WC is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_ZHAOXIN is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_CBUS_GPIO is not set CONFIG_I2C_DESIGNWARE_CORE=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_PCI1XXXX is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# CONFIG_I2C_VIRTIO is not set

# end of I2C Hardware Bus support

# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set

# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_CH341 is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_INTEL_PCI is not set
# CONFIG_SPI_INTEL_PLATFORM is not set
# CONFIG_SPI_MICROCHIP_CORE is not set
# CONFIG_SPI_MICROCHIP_CORE_QSPI is not set
# CONFIG_SPI_LANTIQ_SSC is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PCI1XXXX is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set

#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_SPI_SLAVE=y
# CONFIG_SPI_SLAVE_TIME is not set
# CONFIG_SPI_SLAVE_SYSTEM_CONTROL is not set
CONFIG_SPI_DYNAMIC=y
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
# CONFIG_DP83640_PHY is not set
# CONFIG_PTP_1588_CLOCK_INES is not set
# CONFIG_PTP_1588_CLOCK_KVM is not set
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# CONFIG_PTP_1588_CLOCK_FC3W is not set
# CONFIG_PTP_1588_CLOCK_MOCK is not set
# CONFIG_PTP_1588_CLOCK_VMW is not set

# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=y
# CONFIG_PINCTRL_CY8C95X0 is not set
# CONFIG_PINCTRL_DA9062 is not set
# CONFIG_PINCTRL_MCP23S08 is not set
CONFIG_PINCTRL_SX150X=y

#
# Intel pinctrl drivers
#
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=y
# CONFIG_PINCTRL_LYNXPOINT is not set
CONFIG_PINCTRL_INTEL=y
# CONFIG_PINCTRL_INTEL_PLATFORM is not set
# CONFIG_PINCTRL_ALDERLAKE is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_CANNONLAKE is not set
# CONFIG_PINCTRL_CEDARFORK is not set
# CONFIG_PINCTRL_DENVERTON is not set
# CONFIG_PINCTRL_ELKHARTLAKE is not set
# CONFIG_PINCTRL_EMMITSBURG is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_JASPERLAKE is not set
# CONFIG_PINCTRL_LAKEFIELD is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_METEORLAKE is not set
# CONFIG_PINCTRL_METEORPOINT is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
# CONFIG_PINCTRL_TIGERLAKE is not set

# end of Intel pinctrl drivers

#
# Renesas pinctrl drivers
#

# end of Renesas pinctrl drivers

CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
# CONFIG_GPIO_CDEV_V1 is not set
CONFIG_GPIO_GENERIC=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_GRANITERAPIDS is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_MENZ127 is not set
# CONFIG_GPIO_AMD_FCH is not set

# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_104_DIO_48E is not set
# CONFIG_GPIO_104_IDIO_16 is not set
# CONFIG_GPIO_104_IDI_48 is not set
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_GPIO_MM is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set

# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_FXL6408 is not set
# CONFIG_GPIO_DS4520 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set

# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# CONFIG_GPIO_ADP5520 is not set
CONFIG_GPIO_CRYSTAL_COVE=y
# CONFIG_GPIO_DA9052 is not set
# CONFIG_GPIO_DA9055 is not set
# CONFIG_GPIO_ELKHARTLAKE is not set
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
# CONFIG_GPIO_TPS65912 is not set
# CONFIG_GPIO_TWL4030 is not set
# CONFIG_GPIO_TWL6040 is not set
# CONFIG_GPIO_WM831X is not set
# CONFIG_GPIO_WM8350 is not set

# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set

# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set

# end of SPI GPIO expanders

#
# USB GPIO expanders
#

# end of USB GPIO expanders

#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_LATCH is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set

# end of Virtual GPIO drivers

#
# GPIO Debugging utilities
#
# CONFIG_GPIO_SLOPPY_LOGIC_ANALYZER is not set
# CONFIG_GPIO_VIRTUSER is not set

# end of GPIO Debugging utilities

# CONFIG_W1 is not set
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_RESTART=y
# CONFIG_POWER_SEQUENCING is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_IP5XXX_POWER is not set
# CONFIG_MAX8925_POWER is not set
# CONFIG_WM831X_BACKUP is not set
# CONFIG_WM831X_POWER is not set
# CONFIG_WM8350_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_DA9030 is not set
# CONFIG_BATTERY_DA9052 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_BATTERY_MAX1720X is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_MAX14577 is not set
# CONFIG_CHARGER_MAX77693 is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_CHARGER_TPS65090 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_RT9467 is not set
# CONFIG_CHARGER_RT9471 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
# CONFIG_FUEL_GAUGE_MM8013 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM1177 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ASUS_ROG_RYUJIN is not set
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=m
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_CHIPCAP2 is not set
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DRIVETEMP is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DELL_SMM is not set
# CONFIG_SENSORS_DA9052_ADC is not set
# CONFIG_SENSORS_DA9055 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GIGABYTE_WATERFORCE is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_HS3001 is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWERZ is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LENOVO_EC is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2991 is not set
# CONFIG_SENSORS_LTC2992 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LTC4282 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX127 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_MAX31827 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MC34VR500 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_MLXREG_FAN is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MENF21BMC_HWMON is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_KRAKEN3 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_OXP is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_PT5161L is not set
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC2305 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_SPD5118 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_WM831X is not set
# CONFIG_SENSORS_WM8350 is not set
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ASUS_WMI is not set
# CONFIG_SENSORS_ASUS_EC is not set
# CONFIG_SENSORS_HP_WMI is not set CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y CONFIG_THERMAL_STATISTICS=y
# CONFIG_THERMAL_DEBUGFS is not set
# CONFIG_THERMAL_CORE_TESTING is not set CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set # CONFIG_THERMAL_DEFAULT_GOV_BANG_BANG is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_BANG_BANG=y CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_DEVFREQ_THERMAL=y CONFIG_THERMAL_EMULATION=y

#
# Intel thermal drivers
#
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_X86_PKG_TEMP_THERMAL is not set
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set

# end of ACPI INT340X thermal drivers

# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_INTEL_TCC_COOLING is not set
# CONFIG_INTEL_HFI_THERMAL is not set

# end of Intel thermal drivers

CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set

#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
CONFIG_DA9052_WATCHDOG=y
CONFIG_DA9055_WATCHDOG=y
CONFIG_DA9063_WATCHDOG=y
CONFIG_DA9062_WATCHDOG=y
# CONFIG_LENOVO_SE10_WDT is not set
CONFIG_MENF21BMC_WATCHDOG=y
CONFIG_MENZ069_WATCHDOG=y
CONFIG_WDAT_WDT=y
CONFIG_WM831X_WATCHDOG=y
CONFIG_WM8350_WATCHDOG=y
CONFIG_XILINX_WATCHDOG=y
CONFIG_ZIIRAVE_WATCHDOG=y
CONFIG_RAVE_SP_WATCHDOG=y
# CONFIG_MLX_WDT is not set
CONFIG_CADENCE_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
CONFIG_MAX63XX_WATCHDOG=y
CONFIG_RETU_WATCHDOG=y
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ADVANTECH_EC_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_EBC_C384_WDT is not set
# CONFIG_EXAR_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
CONFIG_SBC_FITPC2_WATCHDOG=y
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
CONFIG_HP_WATCHDOG=y
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_TQMX86_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
CONFIG_SBC_EPX_C3_WATCHDOG=y
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not set
# CONFIG_XEN_WDT is not set

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_AS3711=y
# CONFIG_MFD_SMPRO is not set
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CS42L43_I2C is not set
# CONFIG_MFD_MADERA is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
CONFIG_INTEL_SOC_PMIC=y
CONFIG_INTEL_SOC_PMIC_CHTWC=y
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
# CONFIG_INTEL_SOC_PMIC_MRFLD is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_INTEL_PMC_BXT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
# CONFIG_MFD_MAX77541 is not set
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77843=y
# CONFIG_MFD_MAX8907 is not set
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
CONFIG_MFD_MENF21BMC=y
# CONFIG_MFD_OCELOT is not set
CONFIG_EZX_PCAP=y
# CONFIG_MFD_VIPERBOARD is not set
CONFIG_MFD_RETU=y
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_SY7636A is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RT5120 is not set
CONFIG_MFD_RC5T583=y
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_LP3943 is not set
CONFIG_MFD_LP8788=y
# CONFIG_MFD_TI_LMU is not set
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TI_LP873X is not set
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
# CONFIG_MFD_TPS6594_I2C is not set
# CONFIG_MFD_TPS6594_SPI is not set
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_CS40L50_I2C is not set
# CONFIG_MFD_CS40L50_SPI is not set
CONFIG_RAVE_SP_CORE=y
# CONFIG_MFD_INTEL_M10_BMC_SPI is not set

# end of Multifunction device drivers

CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_NETLINK_EVENTS is not set
# CONFIG_REGULATOR_88PG86X is not set
# CONFIG_REGULATOR_88PM8607 is not set
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_AAT2870 is not set
# CONFIG_REGULATOR_AS3711 is not set
# CONFIG_REGULATOR_AW37503 is not set
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9052 is not set
# CONFIG_REGULATOR_DA9055 is not set
# CONFIG_REGULATOR_DA9062 is not set
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LP8788 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_LTC3676 is not set
# CONFIG_REGULATOR_MAX14577 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX77503 is not set
# CONFIG_REGULATOR_MAX77857 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8893 is not set
# CONFIG_REGULATOR_MAX8925 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8997 is not set
# CONFIG_REGULATOR_MAX8998 is not set
# CONFIG_REGULATOR_MAX20086 is not set
# CONFIG_REGULATOR_MAX20411 is not set
# CONFIG_REGULATOR_MAX77693 is not set
# CONFIG_REGULATOR_MAX77826 is not set
# CONFIG_REGULATOR_MP8859 is not set
# CONFIG_REGULATOR_MT6311 is not set
# CONFIG_REGULATOR_PALMAS is not set
# CONFIG_REGULATOR_PCA9450 is not set
# CONFIG_REGULATOR_PCAP is not set
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
# CONFIG_REGULATOR_PWM is not set
# CONFIG_REGULATOR_RAA215300 is not set
# CONFIG_REGULATOR_RC5T583 is not set
# CONFIG_REGULATOR_RT4801 is not set
# CONFIG_REGULATOR_RT4803 is not set
# CONFIG_REGULATOR_RT5190A is not set
# CONFIG_REGULATOR_RT5739 is not set
# CONFIG_REGULATOR_RT5759 is not set
# CONFIG_REGULATOR_RT6160 is not set
# CONFIG_REGULATOR_RT6190 is not set
# CONFIG_REGULATOR_RT6245 is not set
# CONFIG_REGULATOR_RTQ2134 is not set
# CONFIG_REGULATOR_RTMV20 is not set
# CONFIG_REGULATOR_RTQ6752 is not set
# CONFIG_REGULATOR_RTQ2208 is not set
# CONFIG_REGULATOR_SLG51000 is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65090 is not set
# CONFIG_REGULATOR_TPS65132 is not set
# CONFIG_REGULATOR_TPS6524X is not set
# CONFIG_REGULATOR_TPS6586X is not set
# CONFIG_REGULATOR_TPS65910 is not set
# CONFIG_REGULATOR_TPS65912 is not set
# CONFIG_REGULATOR_TWL4030 is not set
# CONFIG_REGULATOR_WM831X is not set
# CONFIG_REGULATOR_WM8350 is not set
# CONFIG_REGULATOR_WM8400 is not set
CONFIG_RC_CORE=m
CONFIG_LIRC=y
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
# CONFIG_IR_IMON_DECODER is not set
# CONFIG_IR_JVC_DECODER is not set
# CONFIG_IR_MCE_KBD_DECODER is not set
# CONFIG_IR_NEC_DECODER is not set
# CONFIG_IR_RC5_DECODER is not set
# CONFIG_IR_RC6_DECODER is not set
# CONFIG_IR_RCMM_DECODER is not set
# CONFIG_IR_SANYO_DECODER is not set
# CONFIG_IR_SHARP_DECODER is not set
# CONFIG_IR_SONY_DECODER is not set
# CONFIG_IR_XMP_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_IR_ENE is not set
# CONFIG_IR_FINTEK is not set
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_IMON_RAW is not set
# CONFIG_IR_ITE_CIR is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_NUVOTON is not set
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_SERIAL is not set
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_TOY is not set
# CONFIG_IR_TTUSBIR is not set
# CONFIG_IR_WINBOND_CIR is not set
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_RC_XBOX_DVD is not set

#
# CEC support
#
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
# CONFIG_CEC_GPIO is not set
# CONFIG_CEC_SECO is not set
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set

# end of CEC support

# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y CONFIG_SCREEN_INFO=y
CONFIG_VIDEO=y
CONFIG_AUXDISPLAY=y
# CONFIG_HD44780 is not set
# CONFIG_LCD2S is not set
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set CONFIG_CHARLCD_BL_FLASH=y
# CONFIG_IMG_ASCII_LCD is not set
# CONFIG_HT16K33 is not set
# CONFIG_MAX6959 is not set
# CONFIG_SEG_LED_GPIO is not set CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
# CONFIG_DRM_DEBUG_MM is not set CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_PANIC is not set
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set # CONFIG_DRM_DEBUG_MODESET_LOCK is not set CONFIG_DRM_FBDEV_EMULATION=y CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set CONFIG_DRM_LOAD_EDID_FIRMWARE=y CONFIG_DRM_GEM_SHMEM_HELPER=m

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set

# end of I2C encoder or helper chips

#
# ARM devices
#

# end of ARM devices

# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_XE is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
CONFIG_DRM_MGAG200=m
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_AUO_A030JTN01 is not set
# CONFIG_DRM_PANEL_ILITEK_ILI9341 is not set
# CONFIG_DRM_PANEL_ORISETECH_OTA5601A is not set
# CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set

# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set

# end of Display Interface Bridges

# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_PANEL_MIPI_DBI is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9163 is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_XEN_FRONTEND is not set
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
# CONFIG_DRM_WERROR is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
CONFIG_FB_CORE=y
CONFIG_FB_NOTIFY=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DEVICE=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYSMEM_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_IOMEM_FOPS=y
CONFIG_FB_IOMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS_DEFERRED=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_KTD2801 is not set
# CONFIG_BACKLIGHT_KTZ8866 is not set
# CONFIG_BACKLIGHT_PWM is not set
# CONFIG_BACKLIGHT_DA903X is not set
# CONFIG_BACKLIGHT_DA9052 is not set
# CONFIG_BACKLIGHT_MAX8925 is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_WM831X is not set
# CONFIG_BACKLIGHT_ADP5520 is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_88PM860X is not set
# CONFIG_BACKLIGHT_AAT2870 is not set
# CONFIG_BACKLIGHT_LM3509 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_LP8788 is not set
# CONFIG_BACKLIGHT_MP3309C is not set
# CONFIG_BACKLIGHT_PANDORA is not set
# CONFIG_BACKLIGHT_AS3711 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# CONFIG_BACKLIGHT_RAVE_SP is not set

# end of Backlight & LCD device support

CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=80 CONFIG_DUMMY_CONSOLE_ROWS=25 CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER=y

# end of Console display driver support

# CONFIG_LOGO is not set

# end of Graphics support

# CONFIG_DRM_ACCEL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=m

2,331 lines not shown · raw message

Part of this message is not shown here. View the raw message.

#2 lore raw
Quoted 10 lines · Srikanth
Quoted 7 lines · Bert Karwatzki

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Quoted 6 lines

Hello,

On AMD platform as well boot failed starting next-20250422, bisecting the issue led me to same commit dd4cf8c9e1f4. I have attached kernel config and logs.

What is commit dd4cf8c9e1f4? Please use human readable text. The sha is fine for lookup, but without the title it's meaningless to me.

$ git show dd4cf8c9e1f4
fatal: ambiguous argument 'dd4cf8c9e1f4': unknown revision or path not in the working tree.

Don't make me have to download linux-next to figure this out! :-p

-- Steve

#3 lore raw
Quoted 23 lines · Steven Rostedt
Quoted 10 lines · Srikanth
Quoted 7 lines · Bert Karwatzki

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Quoted 6 lines

Hello,

On AMD platform as well boot failed starting next-20250422, bisecting the issue led me to same commit dd4cf8c9e1f4. I have attached kernel config and logs.

What is commit dd4cf8c9e1f4? Please use human readable text. The sha is fine for lookup, but without the title it's meaningless to me.

Quoted 6 lines
$ git show dd4cf8c9e1f4
fatal: ambiguous argument 'dd4cf8c9e1f4': unknown revision or path not in the working tree.

Don't make me have to download linux-next to figure this out! :-p

-- Steve

I had referred the commit from next-20250422 tree.

commit dd4cf8c9e1f426496d63fa4e19fbf4edd5623b33

Author: Paul E. McKenney <[email protected]>
Date:   Thu Apr 10 09:52:53 2025 -0700

ratelimit: Force re-initialization when rate-limiting re-enabled

Currently, rate limiting being disabled results in an immediate early return with no state changes. This can result in false-positive drops when re-enabling rate limiting. Therefore, mark the ratelimit_state structure "uninitialized" when rate limiting is disabled.

Additionally, interpret non-positive ->burst to unconditionally force rate limiting. When ->burst is positive, interpret non-positive
interval
to unconditionally disable rate limiting.

Cc Andrew Morton <[email protected]>
Cc Kuniyuki Iwashima <[email protected]>
Cc Mateusz Guzik <[email protected]>
Cc Petr Mladek <[email protected]>
Cc Steven Rostedt <[email protected]>
Cc John Ogness <[email protected]>
Cc Sergey Senozhatsky <[email protected]>

On todays linux-next build the commit id is c8943bdecfc76711f83241e21da9d4530f872f0d.

#4 lore raw
Quoted 2 lines · Srikanth

On todays linux-next build the commit id is
c8943bdecfc76711f83241e21da9d4530f872f0d.

Which is why you should always state the subject of the commit and not only use the sha of the commit.

Thanks,

-- Steve

#5 lore raw
Quoted 2 lines · On Wed, 23 Apr 2025 10:01:15 -0400 Steven Rostedt <[email protected]> wrote:

Which is why you should always state the subject of the commit and not only use the sha of the commit.

To explain this better, when referencing a commit, the standard way to do so is by saying commit dd4cf8c9e1f4 ("ratelimit: Force re-initialization when rate-limiting re-enabled").

-- Steve

#6 lore raw
In reply to Aithal, Srikanth
Quoted 10 lines · Srikanth
Quoted 7 lines · Bert Karwatzki

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Quoted 5 lines

Hello,

On AMD platform as well boot failed starting next-20250422, bisecting the issue led me to same commit dd4cf8c9e1f4. I have attached kernel config and logs.

Thank you all for the bisection and the report!

Please check out the predecessor of commit dd4cf8c9e1f4 ("ratelimit:
Force re-initialization when rate-limiting re-enabled"):

13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting")

Then please apply the patch shown below, and let me know what happens? (Yes, I should have split that commit up...)

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +1 -1
index 04f16b8e24575..13ed636642270 100644
@@ -35,7 +35,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
 	unsigned long flags;
 	int ret;
 
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0)
 		return 1;
 
 	/*
#7 lore raw

Am Mittwoch, dem 23.04.2025 um 07:18 -0700 schrieb Paul E. McKenney:

Quoted 17 lines · Srikanth
Quoted 10 lines · Bert Karwatzki
Quoted 7 lines

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Quoted 5 lines

Hello,

On AMD platform as well boot failed starting next-20250422, bisecting the issue led me to same commit dd4cf8c9e1f4. I have attached kernel config and logs.

Quoted 6 lines

Thank you all for the bisection and the report!

Please check out the predecessor of commit dd4cf8c9e1f4 ("ratelimit:
Force re-initialization when rate-limiting re-enabled"):

13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting")

The predecessor commit is 24ff89c63355 ("ratelimit: Allow zero ->burst to disable ratelimiting") in linux-next.

Quoted 13 lines

Then please apply the patch shown below, and let me know what happens? (Yes, I should have split that commit up...)

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..13ed636642270 100644

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 41

Quoted 8 lines
lib/ratelimit.c +1 -1
@@ -35,7 +35,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
 	unsigned long flags;
 	int ret;
 
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0)
 		return 1;
 
 	/*

The patch applied on top of 24ff89c63355 ("ratelimit: Allow zero ->burst to disable ratelimiting") works fine.

Bert Karwatzki

#8 lore raw

Am Mittwoch, dem 23.04.2025 um 16:59 +0200 schrieb Bert Karwatzki:

Quoted 48 lines

Am Mittwoch, dem 23.04.2025 um 07:18 -0700 schrieb Paul E. McKenney:

Quoted 17 lines · Srikanth
Quoted 10 lines · Bert Karwatzki
Quoted 7 lines

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Quoted 5 lines

Hello,

On AMD platform as well boot failed starting next-20250422, bisecting the issue led me to same commit dd4cf8c9e1f4. I have attached kernel config and logs.

Quoted 6 lines

Thank you all for the bisection and the report!

Please check out the predecessor of commit dd4cf8c9e1f4 ("ratelimit:
Force re-initialization when rate-limiting re-enabled"):

13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting")

The predecessor commit is 24ff89c63355 ("ratelimit: Allow zero ->burst to disable ratelimiting") in linux-next.

Quoted 20 lines

Then please apply the patch shown below, and let me know what happens? (Yes, I should have split that commit up...)

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +1 -1
index 04f16b8e24575..13ed636642270 100644
@@ -35,7 +35,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
 	unsigned long flags;
 	int ret;
 
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0)
 		return 1;
 
Quoted 6 lines

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 41

Quoted 1 line
lib/ratelimit.c +0 -0
 	/*

The patch applied on top of 24ff89c63355 ("ratelimit: Allow zero ->burst to disable ratelimiting") works fine.

Bert Karwatzki

The problem seems to be the burst == 0 case, this patch fixes the issue in next-20250422:

lib/ratelimit.c +2 -1
index b5c727e976d2..cb7810655027 100644
@@ -40,7 +40,8 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
         * interval says never limit.
         */
        if (interval <= 0 || burst <= 0) {
-               ret = burst > 0;
+               //ret = burst > 0;
+               ret = 1;
                if (!(READ_ONCE(rs->flags) & RATELIMIT_INITIALIZED) ||
                    !raw_spin_trylock_irqsave(&rs->lock, flags))
                        return ret;

Bert Karwatzki

#9 lore raw
In reply to Paul E. McKenney
Quoted 36 lines · Paul E. McKenney
Quoted 10 lines · Srikanth
Quoted 7 lines · Bert Karwatzki

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Quoted 5 lines

Hello,

On AMD platform as well boot failed starting next-20250422, bisecting the issue led me to same commit dd4cf8c9e1f4. I have attached kernel config and logs.

Thank you all for the bisection and the report!

Please check out the predecessor of commit dd4cf8c9e1f4 ("ratelimit:
Force re-initialization when rate-limiting re-enabled"):

13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting")

Then please apply the patch shown below, and let me know what happens? (Yes, I should have split that commit up...)

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..13ed636642270 100644

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 41

Quoted 8 lines
lib/ratelimit.c +1 -1
@@ -35,7 +35,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
  	unsigned long flags;
  	int ret;
 
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0)
  		return 1;
 
  	/*

I applied above patch on top of 13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting") [linux-20250423]. This is fixing the boot issue.

#10 lore raw
Quoted 48 lines · Srikanth
Quoted 36 lines · Paul E. McKenney
Quoted 10 lines · Srikanth
Quoted 7 lines · Bert Karwatzki

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Quoted 5 lines

Hello,

On AMD platform as well boot failed starting next-20250422, bisecting the issue led me to same commit dd4cf8c9e1f4. I have attached kernel config and logs.

Thank you all for the bisection and the report!

Please check out the predecessor of commit dd4cf8c9e1f4 ("ratelimit:
Force re-initialization when rate-limiting re-enabled"):

13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting")

Then please apply the patch shown below, and let me know what happens? (Yes, I should have split that commit up...)

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..13ed636642270 100644

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 39

Quoted 6 lines
lib/ratelimit.c +1 -1
@@ -35,7 +35,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
  	unsigned long flags;
  	int ret;
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0)
  		return 1;
  	/*

I applied above patch on top of 13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting") [linux-20250423]. This is fixing the boot issue.

Quoted 1 line

Thank you both, and to Bert for intuiting the correct -next commit!

Could you please try the next increment, which is this patch, again on top of 24ff89c63355 ("ratelimit: Allow zero ->burst to > disable ratelimiting")?

In the meantime, I will expose the version you two just tested to -next.

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +3 -1
index 04f16b8e24575..8f6c54f719ef2 100644
@@ -35,8 +35,10 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
 	unsigned long flags;
 	int ret;
 
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0) {
+		ret = burst > 0;
 		return 1;
+	}
 
 	/*
 	 * If we contend on this state's lock then just check if
#11 lore raw

Am Mittwoch, dem 23.04.2025 um 11:07 -0700 schrieb Paul E. McKenney:

Quoted 70 lines · Srikanth
Quoted 48 lines · Paul E. McKenney
Quoted 36 lines · Srikanth
Quoted 10 lines · Bert Karwatzki
Quoted 7 lines

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Quoted 5 lines

Hello,

On AMD platform as well boot failed starting next-20250422, bisecting the issue led me to same commit dd4cf8c9e1f4. I have attached kernel config and logs.

Thank you all for the bisection and the report!

Please check out the predecessor of commit dd4cf8c9e1f4 ("ratelimit:
Force re-initialization when rate-limiting re-enabled"):

13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting")

Then please apply the patch shown below, and let me know what happens? (Yes, I should have split that commit up...)

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..13ed636642270 100644

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 39

Quoted 6 lines
lib/ratelimit.c +1 -1
@@ -35,7 +35,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
  	unsigned long flags;
  	int ret;
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0)
  		return 1;
  	/*

I applied above patch on top of 13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting") [linux-20250423]. This is fixing the boot issue.

Quoted 1 line

Thank you both, and to Bert for intuiting the correct -next commit!

Could you please try the next increment, which is this patch, again on top of 24ff89c63355 ("ratelimit: Allow zero ->burst to > disable ratelimiting")?

In the meantime, I will expose the version you two just tested to -next.

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..8f6c54f719ef2 100644
@@ -35,8 +35,10 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
 	unsigned long flags;

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 44

Quoted 10 lines
lib/ratelimit.c +3 -1
 	int ret;
 
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0) {
+		ret = burst > 0;
 		return 1;
+	}
 
 	/*
 	 * If we contend on this state's lock then just check if

If you set "ret = burst > 0", but "return 1" this will make no difference (except in the case of a major compiler bug, probably), as I wrote in my other email which overlapped yours, this fixes the issue in next-20250422:

lib/ratelimit.c +1 -1
index b5c727e976d2..fc28f6cf8269 100644
@@ -40,7 +40,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
         * interval says never limit.
         */
        if (interval <= 0 || burst <= 0) {
-               ret = burst > 0;
+               ret = 1;
                if (!(READ_ONCE(rs->flags) & RATELIMIT_INITIALIZED) ||
                    !raw_spin_trylock_irqsave(&rs->lock, flags))
                        return ret;

Bert Karwatzki

#12 lore raw
Quoted 91 lines · Bert Karwatzki

Am Mittwoch, dem 23.04.2025 um 11:07 -0700 schrieb Paul E. McKenney:

Quoted 70 lines · Srikanth
Quoted 48 lines · Paul E. McKenney
Quoted 36 lines · Srikanth
Quoted 10 lines · Bert Karwatzki
Quoted 7 lines

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Quoted 5 lines

Hello,

On AMD platform as well boot failed starting next-20250422, bisecting the issue led me to same commit dd4cf8c9e1f4. I have attached kernel config and logs.

Thank you all for the bisection and the report!

Please check out the predecessor of commit dd4cf8c9e1f4 ("ratelimit:
Force re-initialization when rate-limiting re-enabled"):

13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting")

Then please apply the patch shown below, and let me know what happens? (Yes, I should have split that commit up...)

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..13ed636642270 100644

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 39

Quoted 6 lines
lib/ratelimit.c +1 -1
@@ -35,7 +35,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
  	unsigned long flags;
  	int ret;
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0)
  		return 1;
  	/*

I applied above patch on top of 13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting") [linux-20250423]. This is fixing the boot issue.

Quoted 1 line

Thank you both, and to Bert for intuiting the correct -next commit!

Could you please try the next increment, which is this patch, again on top of 24ff89c63355 ("ratelimit: Allow zero ->burst to > disable ratelimiting")?

In the meantime, I will expose the version you two just tested to -next.

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..8f6c54f719ef2 100644
@@ -35,8 +35,10 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
 	unsigned long flags;

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 44

Quoted 10 lines
lib/ratelimit.c +3 -1
 	int ret;
 
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0) {
+		ret = burst > 0;
 		return 1;
+	}
 
 	/*
 	 * If we contend on this state's lock then just check if

If you set "ret = burst > 0", but "return 1" this will make no difference (except in the case of a major compiler bug, probably), as I wrote in my other email which overlapped yours, this fixes the issue in next-20250422:

lib/ratelimit.c +0 -0
index b5c727e976d2..fc28f6cf8269 100644

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 46

Quoted 8 lines
lib/ratelimit.c +1 -1
@@ -40,7 +40,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
         * interval says never limit.
         */
        if (interval <= 0 || burst <= 0) {
-               ret = burst > 0;
+               ret = 1;
                if (!(READ_ONCE(rs->flags) & RATELIMIT_INITIALIZED) ||
                    !raw_spin_trylock_irqsave(&rs->lock, flags))
                        return ret;

You are quite right, your patch does fix the issue that you three say. Unfortunately, it prevents someone from completely suppressing output by setting burst to zero. Could you please try the patch below?

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +2 -2
index 04f16b8e24575..d6531e5c6ec4e 100644
@@ -35,8 +35,8 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
 	unsigned long flags;
 	int ret;
 
-	if (!interval || !burst)
-		return 1;
+	if (interval <= 0 || burst <= 0)
+		return interval == 0 || burst > 0;
 
 	/*
 	 * If we contend on this state's lock then just check if
#13 lore raw
Quoted 105 lines · Paul E. McKenney
Quoted 91 lines · Bert Karwatzki

Am Mittwoch, dem 23.04.2025 um 11:07 -0700 schrieb Paul E. McKenney:

Quoted 70 lines · Srikanth
Quoted 48 lines · Paul E. McKenney
Quoted 36 lines · Srikanth
Quoted 10 lines · Bert Karwatzki
Quoted 7 lines

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Quoted 5 lines

Hello,

On AMD platform as well boot failed starting next-20250422, bisecting the issue led me to same commit dd4cf8c9e1f4. I have attached kernel config and logs.

Thank you all for the bisection and the report!

Please check out the predecessor of commit dd4cf8c9e1f4 ("ratelimit:
Force re-initialization when rate-limiting re-enabled"):

13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting")

Then please apply the patch shown below, and let me know what happens? (Yes, I should have split that commit up...)

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..13ed636642270 100644

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 39

Quoted 6 lines
lib/ratelimit.c +1 -1
@@ -35,7 +35,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
   	unsigned long flags;
   	int ret;
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0)
   		return 1;
   	/*

I applied above patch on top of 13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting") [linux-20250423]. This is fixing the boot issue.

Quoted 1 line

Thank you both, and to Bert for intuiting the correct -next commit!

Could you please try the next increment, which is this patch, again on top of 24ff89c63355 ("ratelimit: Allow zero ->burst to > disable ratelimiting")?

In the meantime, I will expose the version you two just tested to -next.

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..8f6c54f719ef2 100644
@@ -35,8 +35,10 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
  	unsigned long flags;

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 44

Quoted 10 lines
lib/ratelimit.c +3 -1
  	int ret;
 
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0) {
+		ret = burst > 0;
  		return 1;
+	}
 
  	/*
  	 * If we contend on this state's lock then just check if

If you set "ret = burst > 0", but "return 1" this will make no difference (except in the case of a major compiler bug, probably), as I wrote in my other email which overlapped yours, this fixes the issue in next-20250422:

lib/ratelimit.c +0 -0
index b5c727e976d2..fc28f6cf8269 100644

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 46

Quoted 8 lines
lib/ratelimit.c +1 -1
@@ -40,7 +40,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
          * interval says never limit.
          */
         if (interval <= 0 || burst <= 0) {
-               ret = burst > 0;
+               ret = 1;
                 if (!(READ_ONCE(rs->flags) & RATELIMIT_INITIALIZED) ||
                     !raw_spin_trylock_irqsave(&rs->lock, flags))
                         return ret;

You are quite right, your patch does fix the issue that you three say. Unfortunately, it prevents someone from completely suppressing output by setting burst to zero. Could you please try the patch below?

Quoted 1 line

Thanx, Paul

I have tested the below patch on top of 13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting") [linux-20250423]. This is fixing the boot issue. Thanks again!

Quoted 18 lines

------------------------------------------------------------------------

lib/ratelimit.c +2 -2
index 04f16b8e24575..d6531e5c6ec4e 100644
@@ -35,8 +35,8 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
  	unsigned long flags;
  	int ret;
 
-	if (!interval || !burst)
-		return 1;
+	if (interval <= 0 || burst <= 0)
+		return interval == 0 || burst > 0;
 
  	/*
  	 * If we contend on this state's lock then just check if
#14 lore raw
In reply to Paul E. McKenney
Quoted 87 lines · Paul E. McKenney
Quoted 86 lines · Bert Karwatzki

Am Mittwoch, dem 23.04.2025 um 11:07 -0700 schrieb Paul E. McKenney:

Quoted 70 lines · Srikanth
Quoted 48 lines · Paul E. McKenney
Quoted 36 lines · Srikanth
Quoted 10 lines · Bert Karwatzki
Quoted 7 lines

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Quoted 5 lines

Hello,

On AMD platform as well boot failed starting next-20250422, bisecting the issue led me to same commit dd4cf8c9e1f4. I have attached kernel config and logs.

Thank you all for the bisection and the report!

Please check out the predecessor of commit dd4cf8c9e1f4 ("ratelimit:
Force re-initialization when rate-limiting re-enabled"):

13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting")

Then please apply the patch shown below, and let me know what happens? (Yes, I should have split that commit up...)

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..13ed636642270 100644

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 39

Quoted 6 lines
lib/ratelimit.c +1 -1
@@ -35,7 +35,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
  	unsigned long flags;
  	int ret;
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0)
  		return 1;
  	/*

I applied above patch on top of 13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting") [linux-20250423]. This is fixing the boot issue.

Quoted 1 line

Thank you both, and to Bert for intuiting the correct -next commit!

Could you please try the next increment, which is this patch, again on top of 24ff89c63355 ("ratelimit: Allow zero ->burst to > disable ratelimiting")?

In the meantime, I will expose the version you two just tested to -next.

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..8f6c54f719ef2 100644
@@ -35,8 +35,10 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
 	unsigned long flags;

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 44

Quoted 10 lines
lib/ratelimit.c +3 -1
 	int ret;
 
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0) {
+		ret = burst > 0;
 		return 1;
+	}
 
 	/*
 	 * If we contend on this state's lock then just check if

If you set "ret = burst > 0", but "return 1" this will make no difference (except in the case of a major compiler bug, probably), as I wrote in my other email which overlapped yours, this fixes the issue in next-20250422:

Quoted 15 lines

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 46

Quoted 13 lines
lib/ratelimit.c +1 -1
index b5c727e976d2..fc28f6cf8269 100644
@@ -40,7 +40,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
         * interval says never limit.
         */
        if (interval <= 0 || burst <= 0) {
-               ret = burst > 0;
+               ret = 1;
                if (!(READ_ONCE(rs->flags) & RATELIMIT_INITIALIZED) ||
                    !raw_spin_trylock_irqsave(&rs->lock, flags))
                        return ret;

You are quite right, your patch does fix the issue that you three say.

Honestly, I do not understand what a ratelimit user could cause this issue. And I am not able to reproduce it on my test system (x86_64, kvm). I mean that my system boots and I see the systemd meesages.

Quoted 2 lines

Unfortunately, it prevents someone from completely suppressing output by setting burst to zero. Could you please try the patch below?

I wondered whether some code used a non-initialized struct ratelimit_state. I tried the following patch:

lib/ratelimit.c +4 -0
index b5c727e976d2..f949a18e9c2b 100644
@@ -35,6 +35,10 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
 	unsigned long flags;
 	int ret;
 
+	WARN_ONCE(interval <= 0 || burst <= 0,
+		  "Possibly using a non-initilized ratelimit struct with interval:%d, burst:%d\n",
+		  interval, burst);
+
 	/*
 	 * Non-positive burst says always limit, otherwise, non-positive
 	 * interval says never limit.

And it triggered:

[    2.874504] ------------[ cut here ]------------
[    2.875552] Possibly using a non-initilized ratelimit struct with interval:0, burst:0
[    2.876990] WARNING: CPU: 2 PID: 1 at lib/ratelimit.c:38 ___ratelimit+0x1e8/0x200
[    2.878435] Modules linked in:
[    2.879045] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Tainted: G        W           6.15.0-rc3-next-20250422-default+ #22 PREEMPT(full)  f5d77f8de4aec34e420e26410c34bcb56f692aae
[    2.881287] Tainted: [W]=WARN
[    2.882010] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
[    2.886452] RIP: 0010:___ratelimit+0x1e8/0x200
[    2.888405] Code: 00 00 e9 b5 fe ff ff 41 bc 01 00 00 00 e9 f2 fe ff ff 89 ea 44 89 e6 48 c7 c7 f8 40 eb 92 c6 05 b5 4d 0f 01 01 e8 28 a0 de fe <0f> 0b e9 71 ff ff ff 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 80 00 00
[    2.891223] RSP: 0000:ffffcf1340013bd8 EFLAGS: 00010282
[    2.892033] RAX: 0000000000000000 RBX: ffff8a8cc2bfbaf0 RCX: 0000000000000000
[    2.893091] RDX: 0000000000000002 RSI: 00000000ffff7fff RDI: 00000000ffffffff
[    2.894158] RBP: 0000000000000000 R08: 00000000ffff7fff R09: ffff8a8d3fe3ffa8
[    2.895168] R10: 00000000ffff8000 R11: 0000000000000001 R12: 0000000000000000
[    2.896150] R13: ffffffff92e08d38 R14: ffff8a8cc369e400 R15: ffff8a8cc2e39f00
[    2.897138] FS:  0000000000000000(0000) GS:ffff8a8da6f3c000(0000) knlGS:0000000000000000
[    2.898224] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.899181] CR2: 0000000000000000 CR3: 0000000153256001 CR4: 0000000000370ef0
[    2.901865] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    2.903516] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    2.906593] Call Trace:
[    2.907143]  <TASK>
[    2.907582]  __ext4_msg+0x6e/0xa0
[    2.908132]  ? lock_is_held_type+0xd8/0x130
[    2.908755]  ext4_check_feature_compatibility+0x15e/0x2c0
[    2.909427]  __ext4_fill_super+0x543/0x1480
[    2.910049]  ext4_fill_super+0xcc/0x280
[    2.910641]  ? setup_bdev_super+0xfc/0x200
[    2.911265]  ? __pfx_ext4_fill_super+0x10/0x10
[    2.911882]  get_tree_bdev_flags+0x13e/0x1e0
[    2.912485]  vfs_get_tree+0x29/0xe0
[    2.912958]  ? capable+0x3a/0x60
[    2.913407]  do_new_mount+0x176/0x360
[    2.913920]  init_mount+0x5a/0x90
[    2.914389]  do_mount_root+0xa2/0x130
[    2.914923]  mount_root_generic+0xdd/0x270
[    2.916127]  ? mount_root+0x147/0x190
[    2.917989]  prepare_namespace+0x1e0/0x230
[    2.919124]  kernel_init_freeable+0x1ec/0x200
[    2.920907]  ? __pfx_kernel_init+0x10/0x10
[    2.922113]  kernel_init+0x1a/0x130
[    2.922616]  ret_from_fork+0x31/0x50
[    2.923093]  ? __pfx_kernel_init+0x10/0x10
[    2.923612]  ret_from_fork_asm+0x1a/0x30
[    2.924110]  </TASK>
[    2.924433] irq event stamp: 1696665
[    2.924955] hardirqs last  enabled at (1696675): [<ffffffff913fa54e>] __up_console_sem+0x5e/0x70
[    2.926072] hardirqs last disabled at (1696686): [<ffffffff913fa533>] __up_console_sem+0x43/0x70
[    2.927149] softirqs last  enabled at (1696612): [<ffffffff9135134e>] handle_softirqs+0x32e/0x400
[    2.928221] softirqs last disabled at (1696591): [<ffffffff91351509>] __irq_exit_rcu+0xd9/0x150
[    2.929167] ---[ end trace 0000000000000000 ]---
[    3.003162] EXT4-fs (vda2): mounted filesystem 587ae802-e330-4059-9b48-d5b845e1075a ro with ordered data mode. Quota mode: none.

I guess that it happens because the structure is initialized too late, see:

static int __ext4_fill_super(struct fs_context *fc, struct super_block *sb) {

	[ ... skipping a lot of initialization code ... ]

	/* Enable message ratelimiting. Default is 10 messages per 5 secs. */
	ratelimit_state_init(&sbi->s_err_ratelimit_state, 5 * HZ, 10);
	ratelimit_state_init(&sbi->s_warning_ratelimit_state, 5 * HZ, 10);
	ratelimit_state_init(&sbi->s_msg_ratelimit_state, 5 * HZ, 10);

	[...]
}

I guess that it is on purpose. They most likely do not want to ratelimit the _very initial messages_ printed when the initialization fails.

Maybe, it is not a good idea to allow to disable the ratelimit by zero burst.

Best Regards,
Petr

#15 lore raw
Quoted 104 lines · Petr Mladek
Quoted 87 lines · Paul E. McKenney
Quoted 86 lines · Bert Karwatzki

Am Mittwoch, dem 23.04.2025 um 11:07 -0700 schrieb Paul E. McKenney:

Quoted 70 lines · Srikanth
Quoted 48 lines · Paul E. McKenney
Quoted 36 lines · Srikanth
Quoted 10 lines · Bert Karwatzki
Quoted 7 lines

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Quoted 5 lines

Hello,

On AMD platform as well boot failed starting next-20250422, bisecting the issue led me to same commit dd4cf8c9e1f4. I have attached kernel config and logs.

Thank you all for the bisection and the report!

Please check out the predecessor of commit dd4cf8c9e1f4 ("ratelimit:
Force re-initialization when rate-limiting re-enabled"):

13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting")

Then please apply the patch shown below, and let me know what happens? (Yes, I should have split that commit up...)

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..13ed636642270 100644

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 39

Quoted 6 lines
lib/ratelimit.c +1 -1
@@ -35,7 +35,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
  	unsigned long flags;
  	int ret;
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0)
  		return 1;
  	/*

I applied above patch on top of 13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting") [linux-20250423]. This is fixing the boot issue.

Quoted 1 line

Thank you both, and to Bert for intuiting the correct -next commit!

Could you please try the next increment, which is this patch, again on top of 24ff89c63355 ("ratelimit: Allow zero ->burst to > disable ratelimiting")?

In the meantime, I will expose the version you two just tested to -next.

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..8f6c54f719ef2 100644
@@ -35,8 +35,10 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
 	unsigned long flags;

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 44

Quoted 10 lines
lib/ratelimit.c +3 -1
 	int ret;
 
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0) {
+		ret = burst > 0;
 		return 1;
+	}
 
 	/*
 	 * If we contend on this state's lock then just check if

If you set "ret = burst > 0", but "return 1" this will make no difference (except in the case of a major compiler bug, probably), as I wrote in my other email which overlapped yours, this fixes the issue in next-20250422:

Quoted 15 lines

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 46

Quoted 13 lines
lib/ratelimit.c +1 -1
index b5c727e976d2..fc28f6cf8269 100644
@@ -40,7 +40,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
         * interval says never limit.
         */
        if (interval <= 0 || burst <= 0) {
-               ret = burst > 0;
+               ret = 1;
                if (!(READ_ONCE(rs->flags) & RATELIMIT_INITIALIZED) ||
                    !raw_spin_trylock_irqsave(&rs->lock, flags))
                        return ret;

You are quite right, your patch does fix the issue that you three say.

Quoted 3 lines

Honestly, I do not understand what a ratelimit user could cause this issue. And I am not able to reproduce it on my test system (x86_64, kvm). I mean that my system boots and I see the systemd meesages.

My bug was that interval==0 suppressed all ratelimited output, when it is instead supposed to never suppress it, as illustrated by the RATELIMIT_STATE_INIT_DISABLED() macro that I somehow managed to ignore. (Yes, I need more tests! And I will do so.)

Quoted 40 lines
Quoted 2 lines

Unfortunately, it prevents someone from completely suppressing output by setting burst to zero. Could you please try the patch below?

I wondered whether some code used a non-initialized struct ratelimit_state. I tried the following patch:

lib/ratelimit.c +4 -0
index b5c727e976d2..f949a18e9c2b 100644
@@ -35,6 +35,10 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
 	unsigned long flags;
 	int ret;
 
+	WARN_ONCE(interval <= 0 || burst <= 0,
+		  "Possibly using a non-initilized ratelimit struct with interval:%d, burst:%d\n",
+		  interval, burst);
+
 	/*
 	 * Non-positive burst says always limit, otherwise, non-positive
 	 * interval says never limit.

And it triggered:

[    2.874504] ------------[ cut here ]------------
[    2.875552] Possibly using a non-initilized ratelimit struct with interval:0, burst:0
[    2.876990] WARNING: CPU: 2 PID: 1 at lib/ratelimit.c:38 ___ratelimit+0x1e8/0x200
[    2.878435] Modules linked in:
[    2.879045] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Tainted: G        W           6.15.0-rc3-next-20250422-default+ #22 PREEMPT(full)  f5d77f8de4aec34e420e26410c34bcb56f692aae
[    2.881287] Tainted: [W]=WARN
[    2.882010] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
[    2.886452] RIP: 0010:___ratelimit+0x1e8/0x200
[    2.888405] Code: 00 00 e9 b5 fe ff ff 41 bc 01 00 00 00 e9 f2 fe ff ff 89 ea 44 89 e6 48 c7 c7 f8 40 eb 92 c6 05 b5 4d 0f 01 01 e8 28 a0 de fe <0f> 0b e9 71 ff ff ff 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 80 00 00
[    2.891223] RSP: 0000:ffffcf1340013bd8 EFLAGS: 00010282
[    2.892033] RAX: 0000000000000000 RBX: ffff8a8cc2bfbaf0 RCX: 0000000000000000
[    2.893091] RDX: 0000000000000002 RSI: 00000000ffff7fff RDI: 00000000ffffffff
[    2.894158] RBP: 0000000000000000 R08: 00000000ffff7fff R09: ffff8a8d3fe3ffa8
[    2.895168] R10: 00000000ffff8000 R11: 0000000000000001 R12: 0000000000000000
[    2.896150] R13: ffffffff92e08d38 R14: ffff8a8cc369e400 R15: ffff8a8cc2e39f00
Quoted 8 lines
[    2.897138] FS:  0000000000000000(0000) GS:ffff8a8da6f3c000(0000) knlGS:0000000000000000
[    2.898224] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.899181] CR2: 0000000000000000 CR3: 0000000153256001 CR4: 0000000000370ef0
[    2.901865] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    2.903516] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    2.906593] Call Trace:
[    2.907143]  <TASK>
[    2.907582]  __ext4_msg+0x6e/0xa0

Ths is the ->s_msg_ratelimit_state field of the ext4_sb_info structure, which is allocated via kzalloc(). It looks like these two statements:

EXT4_RW_ATTR_SBI_PI(msg_ratelimit_interval_ms, s_msg_ratelimit_state.interval); EXT4_RW_ATTR_SBI_PI(msg_ratelimit_burst, s_msg_ratelimit_state.burst);

Allow the sysadm to specify rate-limiting if desired, with the default of no rate limiting. And zero-initialization seems like a reasonable thing to allow for a default-never-ratelimited ratelimit_state structure, not?

So given Bert's survey of the users, would it make sense to have your WARN_ONCE(), but only if either burst or interval is negative?

Unless you tell me otherwise, I will add that with your Signed-off-by, and noting Bert's good work.

Thanx, Paul

Quoted 55 lines
[    2.908132]  ? lock_is_held_type+0xd8/0x130
[    2.908755]  ext4_check_feature_compatibility+0x15e/0x2c0
[    2.909427]  __ext4_fill_super+0x543/0x1480
[    2.910049]  ext4_fill_super+0xcc/0x280
[    2.910641]  ? setup_bdev_super+0xfc/0x200
[    2.911265]  ? __pfx_ext4_fill_super+0x10/0x10
[    2.911882]  get_tree_bdev_flags+0x13e/0x1e0
[    2.912485]  vfs_get_tree+0x29/0xe0
[    2.912958]  ? capable+0x3a/0x60
[    2.913407]  do_new_mount+0x176/0x360
[    2.913920]  init_mount+0x5a/0x90
[    2.914389]  do_mount_root+0xa2/0x130
[    2.914923]  mount_root_generic+0xdd/0x270
[    2.916127]  ? mount_root+0x147/0x190
[    2.917989]  prepare_namespace+0x1e0/0x230
[    2.919124]  kernel_init_freeable+0x1ec/0x200
[    2.920907]  ? __pfx_kernel_init+0x10/0x10
[    2.922113]  kernel_init+0x1a/0x130
[    2.922616]  ret_from_fork+0x31/0x50
[    2.923093]  ? __pfx_kernel_init+0x10/0x10
[    2.923612]  ret_from_fork_asm+0x1a/0x30
[    2.924110]  </TASK>
[    2.924433] irq event stamp: 1696665
[    2.924955] hardirqs last  enabled at (1696675): [<ffffffff913fa54e>] __up_console_sem+0x5e/0x70
[    2.926072] hardirqs last disabled at (1696686): [<ffffffff913fa533>] __up_console_sem+0x43/0x70
[    2.927149] softirqs last  enabled at (1696612): [<ffffffff9135134e>] handle_softirqs+0x32e/0x400
[    2.928221] softirqs last disabled at (1696591): [<ffffffff91351509>] __irq_exit_rcu+0xd9/0x150
[    2.929167] ---[ end trace 0000000000000000 ]---
[    3.003162] EXT4-fs (vda2): mounted filesystem 587ae802-e330-4059-9b48-d5b845e1075a ro with ordered data mode. Quota mode: none.

I guess that it happens because the structure is initialized too late, see:

static int __ext4_fill_super(struct fs_context *fc, struct super_block *sb) {

	[ ... skipping a lot of initialization code ... ]

	/* Enable message ratelimiting. Default is 10 messages per 5 secs. */
	ratelimit_state_init(&sbi->s_err_ratelimit_state, 5 * HZ, 10);
	ratelimit_state_init(&sbi->s_warning_ratelimit_state, 5 * HZ, 10);
	ratelimit_state_init(&sbi->s_msg_ratelimit_state, 5 * HZ, 10);

	[...]
}

I guess that it is on purpose. They most likely do not want to ratelimit the _very initial messages_ printed when the initialization fails.

Maybe, it is not a good idea to allow to disable the ratelimit by zero burst.

Best Regards,
Petr

#16 lore raw
Quoted 40 lines · Paul E. McKenney
Quoted 39 lines · Petr Mladek
Quoted 37 lines · Paul E. McKenney
Quoted 26 lines · Bert Karwatzki

Am Mittwoch, dem 23.04.2025 um 11:07 -0700 schrieb Paul E. McKenney:

Quoted 19 lines · Srikanth
Quoted 18 lines · Paul E. McKenney
Quoted 17 lines · Srikanth
Quoted 15 lines · Bert Karwatzki
Quoted 7 lines

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Hello,

On AMD platform as well boot failed starting next-20250422, bisecting the issue led me to same commit dd4cf8c9e1f4. I have attached kernel config and logs.

lib/ratelimit.c +0 -0
index b5c727e976d2..fc28f6cf8269 100644

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 46

Quoted 8 lines
lib/ratelimit.c +1 -1
@@ -40,7 +40,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
         * interval says never limit.
         */
        if (interval <= 0 || burst <= 0) {
-               ret = burst > 0;
+               ret = 1;
                if (!(READ_ONCE(rs->flags) & RATELIMIT_INITIALIZED) ||
                    !raw_spin_trylock_irqsave(&rs->lock, flags))
                        return ret;

You are quite right, your patch does fix the issue that you three say.

Quoted 8 lines
Quoted 3 lines

Honestly, I do not understand what a ratelimit user could cause this issue. And I am not able to reproduce it on my test system (x86_64, kvm). I mean that my system boots and I see the systemd meesages.

My bug was that interval==0 suppressed all ratelimited output, when it is instead supposed to never suppress it, as illustrated by the RATELIMIT_STATE_INIT_DISABLED() macro that I somehow managed to ignore. (Yes, I need more tests! And I will do so.)

Your code actually supported RATELIMIT_STATE_INIT_DISABLED(). ___ratelimit() returned 1 because the burst was 10 > 0 ;-)

Quoted 52 lines
Quoted 40 lines
Quoted 2 lines

Unfortunately, it prevents someone from completely suppressing output by setting burst to zero. Could you please try the patch below?

I wondered whether some code used a non-initialized struct ratelimit_state. I tried the following patch:

lib/ratelimit.c +4 -0
index b5c727e976d2..f949a18e9c2b 100644
@@ -35,6 +35,10 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
 	unsigned long flags;
 	int ret;
 
+	WARN_ONCE(interval <= 0 || burst <= 0,
+		  "Possibly using a non-initilized ratelimit struct with interval:%d, burst:%d\n",
+		  interval, burst);
+
 	/*
 	 * Non-positive burst says always limit, otherwise, non-positive
 	 * interval says never limit.

And it triggered:

[    2.874504] ------------[ cut here ]------------
[    2.875552] Possibly using a non-initilized ratelimit struct with interval:0, burst:0
[    2.876990] WARNING: CPU: 2 PID: 1 at lib/ratelimit.c:38 ___ratelimit+0x1e8/0x200
[    2.878435] Modules linked in:
[    2.879045] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Tainted: G        W           6.15.0-rc3-next-20250422-default+ #22 PREEMPT(full)  f5d77f8de4aec34e420e26410c34bcb56f692aae
[    2.881287] Tainted: [W]=WARN
[    2.882010] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
[    2.886452] RIP: 0010:___ratelimit+0x1e8/0x200
[    2.888405] Code: 00 00 e9 b5 fe ff ff 41 bc 01 00 00 00 e9 f2 fe ff ff 89 ea 44 89 e6 48 c7 c7 f8 40 eb 92 c6 05 b5 4d 0f 01 01 e8 28 a0 de fe <0f> 0b e9 71 ff ff ff 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 80 00 00
[    2.891223] RSP: 0000:ffffcf1340013bd8 EFLAGS: 00010282
[    2.892033] RAX: 0000000000000000 RBX: ffff8a8cc2bfbaf0 RCX: 0000000000000000
[    2.893091] RDX: 0000000000000002 RSI: 00000000ffff7fff RDI: 00000000ffffffff
[    2.894158] RBP: 0000000000000000 R08: 00000000ffff7fff R09: ffff8a8d3fe3ffa8
[    2.895168] R10: 00000000ffff8000 R11: 0000000000000001 R12: 0000000000000000
[    2.896150] R13: ffffffff92e08d38 R14: ffff8a8cc369e400 R15: ffff8a8cc2e39f00
Quoted 8 lines
[    2.897138] FS:  0000000000000000(0000) GS:ffff8a8da6f3c000(0000) knlGS:0000000000000000
[    2.898224] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.899181] CR2: 0000000000000000 CR3: 0000000153256001 CR4: 0000000000370ef0
[    2.901865] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    2.903516] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    2.906593] Call Trace:
[    2.907143]  <TASK>
[    2.907582]  __ext4_msg+0x6e/0xa0

Ths is the ->s_msg_ratelimit_state field of the ext4_sb_info structure, which is allocated via kzalloc(). It looks like these two statements:

Quoted 6 lines

EXT4_RW_ATTR_SBI_PI(msg_ratelimit_interval_ms, s_msg_ratelimit_state.interval); EXT4_RW_ATTR_SBI_PI(msg_ratelimit_burst, s_msg_ratelimit_state.burst);

Allow the sysadm to specify rate-limiting if desired, with the default of no rate limiting. And zero-initialization seems like a reasonable thing to allow for a default-never-ratelimited ratelimit_state structure, not?

Exactly. I belive that ___ratelimit() should return 1 (always pass) when the structure is zero-initialized. I was not clear enough.

It is not ideal from the semantic POV. It would make sense to use "zero" burst for always limiting the output. But this does not work in the zero-initialized case.

A solution would be to handle the corner cases (always pass, never pass) using some flag, for example:

#define RATELIMIT_ALWAYS_PASS BIT(2)
#define RATELIMIT_NEVER_PASS BIT(3)

instead of some combinations of interval and burst values.

But I think that it is not worth it. I guess that most users want to use ___ratelimit() for a real rate limiting. And the only problem is the not-yet-initialized structure which should just "pass".

Quoted 2 lines

So given Bert's survey of the users, would it make sense to have your WARN_ONCE(), but only if either burst or interval is negative?

It might make sense. It would help to catch a use of not-yet-initialized and not-even-zeroed struct ratelimit_state which might produce random results.

Quoted 2 lines

Unless you tell me otherwise, I will add that with your Signed-off-by, and noting Bert's good work.

Feel free to use my SOB.

Best Regards,
Petr

PS: I see that you have already sent v3 of the series. I am going to
look at it. I am not sure if I manage it today though.

#17 lore raw
Quoted 45 lines · Petr Mladek
Quoted 44 lines · Paul E. McKenney
Quoted 42 lines · Petr Mladek
Quoted 22 lines · Paul E. McKenney
Quoted 21 lines · Bert Karwatzki

Am Mittwoch, dem 23.04.2025 um 11:07 -0700 schrieb Paul E. McKenney:

Quoted 19 lines · Srikanth
Quoted 18 lines · Paul E. McKenney
Quoted 17 lines · Srikanth
Quoted 15 lines · Bert Karwatzki
Quoted 7 lines

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Hello,

On AMD platform as well boot failed starting next-20250422, bisecting the issue led me to same commit dd4cf8c9e1f4. I have attached kernel config and logs.

Quoted 15 lines

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 46

Quoted 13 lines
lib/ratelimit.c +1 -1
index b5c727e976d2..fc28f6cf8269 100644
@@ -40,7 +40,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
         * interval says never limit.
         */
        if (interval <= 0 || burst <= 0) {
-               ret = burst > 0;
+               ret = 1;
                if (!(READ_ONCE(rs->flags) & RATELIMIT_INITIALIZED) ||
                    !raw_spin_trylock_irqsave(&rs->lock, flags))
                        return ret;

You are quite right, your patch does fix the issue that you three say.

Honestly, I do not understand what a ratelimit user could cause this issue. And I am not able to reproduce it on my test system (x86_64, kvm). I mean that my system boots and I see the systemd meesages.

Quoted 7 lines
Quoted 4 lines

My bug was that interval==0 suppressed all ratelimited output, when it is instead supposed to never suppress it, as illustrated by the RATELIMIT_STATE_INIT_DISABLED() macro that I somehow managed to ignore. (Yes, I need more tests! And I will do so.)

Your code actually supported RATELIMIT_STATE_INIT_DISABLED(). ___ratelimit() returned 1 because the burst was 10 > 0 ;-)

Sometimes I get lucky? ;-)

Quoted 55 lines
Quoted 55 lines
Quoted 40 lines
Quoted 2 lines

Unfortunately, it prevents someone from completely suppressing output by setting burst to zero. Could you please try the patch below?

I wondered whether some code used a non-initialized struct ratelimit_state. I tried the following patch:

lib/ratelimit.c +4 -0
index b5c727e976d2..f949a18e9c2b 100644
@@ -35,6 +35,10 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
 	unsigned long flags;
 	int ret;
 
+	WARN_ONCE(interval <= 0 || burst <= 0,
+		  "Possibly using a non-initilized ratelimit struct with interval:%d, burst:%d\n",
+		  interval, burst);
+
 	/*
 	 * Non-positive burst says always limit, otherwise, non-positive
 	 * interval says never limit.

And it triggered:

[    2.874504] ------------[ cut here ]------------
[    2.875552] Possibly using a non-initilized ratelimit struct with interval:0, burst:0
[    2.876990] WARNING: CPU: 2 PID: 1 at lib/ratelimit.c:38 ___ratelimit+0x1e8/0x200
[    2.878435] Modules linked in:
[    2.879045] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Tainted: G        W           6.15.0-rc3-next-20250422-default+ #22 PREEMPT(full)  f5d77f8de4aec34e420e26410c34bcb56f692aae
[    2.881287] Tainted: [W]=WARN
[    2.882010] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
[    2.886452] RIP: 0010:___ratelimit+0x1e8/0x200
[    2.888405] Code: 00 00 e9 b5 fe ff ff 41 bc 01 00 00 00 e9 f2 fe ff ff 89 ea 44 89 e6 48 c7 c7 f8 40 eb 92 c6 05 b5 4d 0f 01 01 e8 28 a0 de fe <0f> 0b e9 71 ff ff ff 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 80 00 00
[    2.891223] RSP: 0000:ffffcf1340013bd8 EFLAGS: 00010282
[    2.892033] RAX: 0000000000000000 RBX: ffff8a8cc2bfbaf0 RCX: 0000000000000000
[    2.893091] RDX: 0000000000000002 RSI: 00000000ffff7fff RDI: 00000000ffffffff
[    2.894158] RBP: 0000000000000000 R08: 00000000ffff7fff R09: ffff8a8d3fe3ffa8
[    2.895168] R10: 00000000ffff8000 R11: 0000000000000001 R12: 0000000000000000
[    2.896150] R13: ffffffff92e08d38 R14: ffff8a8cc369e400 R15: ffff8a8cc2e39f00
Quoted 8 lines
[    2.897138] FS:  0000000000000000(0000) GS:ffff8a8da6f3c000(0000) knlGS:0000000000000000
[    2.898224] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.899181] CR2: 0000000000000000 CR3: 0000000153256001 CR4: 0000000000370ef0
[    2.901865] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    2.903516] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    2.906593] Call Trace:
[    2.907143]  <TASK>
[    2.907582]  __ext4_msg+0x6e/0xa0

Ths is the ->s_msg_ratelimit_state field of the ext4_sb_info structure, which is allocated via kzalloc(). It looks like these two statements:

EXT4_RW_ATTR_SBI_PI(msg_ratelimit_interval_ms, s_msg_ratelimit_state.interval); EXT4_RW_ATTR_SBI_PI(msg_ratelimit_burst, s_msg_ratelimit_state.burst);

Quoted 6 lines
Quoted 3 lines

Allow the sysadm to specify rate-limiting if desired, with the default of no rate limiting. And zero-initialization seems like a reasonable thing to allow for a default-never-ratelimited ratelimit_state structure, not?

Exactly. I belive that ___ratelimit() should return 1 (always pass) when the structure is zero-initialized. I was not clear enough.

Whew!!! ;-)

Quoted 10 lines

It is not ideal from the semantic POV. It would make sense to use "zero" burst for always limiting the output. But this does not work in the zero-initialized case.

A solution would be to handle the corner cases (always pass, never pass) using some flag, for example:

#define RATELIMIT_ALWAYS_PASS BIT(2)
#define RATELIMIT_NEVER_PASS BIT(3)

Quoted 6 lines

instead of some combinations of interval and burst values.

But I think that it is not worth it. I guess that most users want to use ___ratelimit() for a real rate limiting. And the only problem is the not-yet-initialized structure which should just "pass".

I agree that the current semantic is annoying, but appropriate given the history and current situation. Of course, your suggested approach might well be what we eventually move to. However, let's have a real problem before we try to solve it. ;-)

Quoted 11 lines
Quoted 2 lines

So given Bert's survey of the users, would it make sense to have your WARN_ONCE(), but only if either burst or interval is negative?

It might make sense. It would help to catch a use of not-yet-initialized and not-even-zeroed struct ratelimit_state which might produce random results.

Quoted 2 lines

Unless you tell me otherwise, I will add that with your Signed-off-by, and noting Bert's good work.

Feel free to use my SOB.

Thank you very much!

Quoted 5 lines

Best Regards,
Petr

PS: I see that you have already sent v3 of the series. I am going to
look at it. I am not sure if I manage it today though.

Absolutely no problem, especially given that it is probably already your weekend.

Testing overnight went well, and I am now testing a new RCU branch from Joel and Boqun. If that passes, I will rebase on that. Otherwise, I keep the current branch, but expose the rest of my ratelimit series to -next. Which probably won't have any effect until -next Monday, but that has the benefit of allowing for more feedback in the meantime.

Thanx, Paul

#18 lore raw
In reply to Paul E. McKenney

Am Mittwoch, dem 23.04.2025 um 12:56 -0700 schrieb Paul E. McKenney:

Quoted 114 lines · Bert Karwatzki
Quoted 91 lines

Am Mittwoch, dem 23.04.2025 um 11:07 -0700 schrieb Paul E. McKenney:

Quoted 70 lines · Srikanth
Quoted 48 lines · Paul E. McKenney
Quoted 36 lines · Srikanth
Quoted 10 lines · Bert Karwatzki
Quoted 7 lines

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Quoted 5 lines

Hello,

On AMD platform as well boot failed starting next-20250422, bisecting the issue led me to same commit dd4cf8c9e1f4. I have attached kernel config and logs.

Thank you all for the bisection and the report!

Please check out the predecessor of commit dd4cf8c9e1f4 ("ratelimit:
Force re-initialization when rate-limiting re-enabled"):

13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting")

Then please apply the patch shown below, and let me know what happens? (Yes, I should have split that commit up...)

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..13ed636642270 100644

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 39

Quoted 6 lines
lib/ratelimit.c +1 -1
@@ -35,7 +35,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
  	unsigned long flags;
  	int ret;
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0)
  		return 1;
  	/*

I applied above patch on top of 13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting") [linux-20250423]. This is fixing the boot issue.

Quoted 1 line

Thank you both, and to Bert for intuiting the correct -next commit!

Could you please try the next increment, which is this patch, again on top of 24ff89c63355 ("ratelimit: Allow zero ->burst to > disable ratelimiting")?

In the meantime, I will expose the version you two just tested to -next.

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..8f6c54f719ef2 100644
@@ -35,8 +35,10 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
 	unsigned long flags;

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 44

Quoted 10 lines
lib/ratelimit.c +3 -1
 	int ret;
 
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0) {
+		ret = burst > 0;
 		return 1;
+	}
 
 	/*
 	 * If we contend on this state's lock then just check if

If you set "ret = burst > 0", but "return 1" this will make no difference (except in the case of a major compiler bug, probably), as I wrote in my other email which overlapped yours, this fixes the issue in next-20250422:

lib/ratelimit.c +0 -0
index b5c727e976d2..fc28f6cf8269 100644

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 46

Quoted 8 lines
lib/ratelimit.c +1 -1
@@ -40,7 +40,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
         * interval says never limit.
         */
        if (interval <= 0 || burst <= 0) {
-               ret = burst > 0;
+               ret = 1;
                if (!(READ_ONCE(rs->flags) & RATELIMIT_INITIALIZED) ||
                    !raw_spin_trylock_irqsave(&rs->lock, flags))
                        return ret;

You are quite right, your patch does fix the issue that you three say. Unfortunately, it prevents someone from completely suppressing output by setting burst to zero. Could you please try the patch below?

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..d6531e5c6ec4e 100644

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 42

Quoted 10 lines
lib/ratelimit.c +2 -2
@@ -35,8 +35,8 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
 	unsigned long flags;
 	int ret;
 
-	if (!interval || !burst)
-		return 1;
+	if (interval <= 0 || burst <= 0)
+		return interval == 0 || burst > 0;
 
 	/*
 	 * If we contend on this state's lock then just check if

This patch will make no difference for me as I've monitored every call to ___ratelimit() with "printk(KERN_INFO "%s: interval = %d burst = %d\n", __func__, interval, burst)" and at least for me burst == 0 is always acompanied by intervall == 0.

Bert Karwatzki

#19 lore raw
Quoted 123 lines · Bert Karwatzki

Am Mittwoch, dem 23.04.2025 um 12:56 -0700 schrieb Paul E. McKenney:

Quoted 122 lines · Bert Karwatzki
Quoted 91 lines

Am Mittwoch, dem 23.04.2025 um 11:07 -0700 schrieb Paul E. McKenney:

Quoted 70 lines · Srikanth
Quoted 48 lines · Paul E. McKenney
Quoted 36 lines · Srikanth
Quoted 10 lines · Bert Karwatzki
Quoted 7 lines

Since linux next-20250422 booting fails on my MSI Alpha 15 Laptop runnning debian sid. When booting kernel message appear on screen but no messages from init (systemd). There are also no logs written even thought emergency sync via magic sysrq works (a message is printed on screen), presumably because / is not mounted. I bisected this (from 6.15-rc3 to next-20250422) and found commit dd4cf8c9e1f4 as the first bad commit.
Reverting commit dd4cf8c9e1f4 in next-20250422 fixes the issue.

Quoted 5 lines

Hello,

On AMD platform as well boot failed starting next-20250422, bisecting the issue led me to same commit dd4cf8c9e1f4. I have attached kernel config and logs.

Thank you all for the bisection and the report!

Please check out the predecessor of commit dd4cf8c9e1f4 ("ratelimit:
Force re-initialization when rate-limiting re-enabled"):

13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting")

Then please apply the patch shown below, and let me know what happens? (Yes, I should have split that commit up...)

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..13ed636642270 100644

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 39

Quoted 6 lines
lib/ratelimit.c +1 -1
@@ -35,7 +35,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
  	unsigned long flags;
  	int ret;
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0)
  		return 1;
  	/*

I applied above patch on top of 13fa70e052dd ("ratelimit: Allow zero ->burst to disable ratelimiting") [linux-20250423]. This is fixing the boot issue.

Quoted 1 line

Thank you both, and to Bert for intuiting the correct -next commit!

Could you please try the next increment, which is this patch, again on top of 24ff89c63355 ("ratelimit: Allow zero ->burst to > disable ratelimiting")?

In the meantime, I will expose the version you two just tested to -next.

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +0 -0
index 04f16b8e24575..8f6c54f719ef2 100644
@@ -35,8 +35,10 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
 	unsigned long flags;

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 44

Quoted 10 lines
lib/ratelimit.c +3 -1
 	int ret;
 
-	if (!interval || !burst)
+	if (interval <= 0 || burst <= 0) {
+		ret = burst > 0;
 		return 1;
+	}
 
 	/*
 	 * If we contend on this state's lock then just check if

If you set "ret = burst > 0", but "return 1" this will make no difference (except in the case of a major compiler bug, probably), as I wrote in my other email which overlapped yours, this fixes the issue in next-20250422:

lib/ratelimit.c +0 -0
index b5c727e976d2..fc28f6cf8269 100644

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 46

Quoted 8 lines
lib/ratelimit.c +1 -1
@@ -40,7 +40,7 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
         * interval says never limit.
         */
        if (interval <= 0 || burst <= 0) {
-               ret = burst > 0;
+               ret = 1;
                if (!(READ_ONCE(rs->flags) & RATELIMIT_INITIALIZED) ||
                    !raw_spin_trylock_irqsave(&rs->lock, flags))
                        return ret;

You are quite right, your patch does fix the issue that you three say. Unfortunately, it prevents someone from completely suppressing output by setting burst to zero. Could you please try the patch below?

Thanx, Paul

------------------------------------------------------------------------

lib/ratelimit.c +2 -2
index 04f16b8e24575..d6531e5c6ec4e 100644
@@ -35,8 +35,8 @@ int ___ratelimit(struct ratelimit_state *rs, const char *func)
 	unsigned long flags;
 	int ret;
 
-	if (!interval || !burst)
-		return 1;
+	if (interval <= 0 || burst <= 0)
+		return interval == 0 || burst > 0;
 
Quoted 7 lines

lib/ratelimit.c int ___ratelimit(struct ratelimit_state *rs, const char *func) · line 42

Quoted 2 lines
lib/ratelimit.c +0 -0
 	/*
 	 * If we contend on this state's lock then just check if

This patch will make no difference for me as I've monitored every call to ___ratelimit() with "printk(KERN_INFO "%s: interval = %d burst = %d\n", __func__, interval, burst)" and at least for me burst == 0 is always acompanied by intervall == 0.

You lost me on this one.

With my previous "burst > 0", if both are zero, it would set ret to false, right?

With the new "interval == 0 || burst > 0", if both are zero, then interval must be zero, so the result would instead be true, correct?

So what am I missing here?

Thanx, Paul