hwmon: Add KEBA fan controller support
Subsystems (2)
PATCH 1/1 hwmon: Add KEBA fan controller support
From: Gerhard Engleder <[email protected]>
The KEBA fan controller is found in the system FPGA of KEBA PLC devices. It detects if the fan is removed or blocked. For fans with tacho signal the monitoring of the speed of the fan is supported. It also supports to regulate the speed of fans with PWM input.
The auxiliary device for this driver is instantiated by the cp500 misc driver.
--- Documentation/hwmon/index.rst | 1 + Documentation/hwmon/kfan.rst | 39 ++++++ drivers/hwmon/Kconfig | 10 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/kfan.c | 243 ++++++++++++++++++++++++++++++++++ 5 files changed, 294 insertions(+) create mode 100644 Documentation/hwmon/kfan.rst create mode 100644 drivers/hwmon/kfan.c
Documentation/hwmon/index.rst +1 -0
@@ -107,6 +107,7 @@ Hardware Monitoring Kernel Drivers k10temp k8temp kbatt + kfan lan966x lineage-pem lm25066
Documentation/hwmon/kfan.rst new file +39 -0
@@ -0,0 +1,39 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver kfan +================== + +Supported chips: + + * KEBA fan controller (IP core in FPGA) + + Prefix: 'kfan' + +Authors: + + Gerhard Engleder <[email protected]> + Petar Bojanic <[email protected]> + +Description +----------- + +The KEBA fan controller is an IP core for FPGAs, which monitors the health +and controls the speed of a fan. The fan is typically used to cool the CPU +and the whole device. E.g., the CP500 FPGA includes this IP core to monitor +and control the fan of PLCs and the corresponding cp500 driver creates an +auxiliary device for the kfan driver. + +This driver provides information about the fan health to user space. +The user space shall be informed if the fan is removed or blocked. +Additionally, the speed in RPM is reported for fans with tacho signal. + +For fan control PWM is supported. For PWM 255 equals 100%. None-regulable +fans can be turned on with PWM 255 and turned off with PWM 0. + +====================== ==== =================================================== +Attribute R/W Contents +====================== ==== =================================================== +fan1_fault R Fan fault +fan1_input R Fan tachometer input (in RPM) +pwm1 RW Fan target duty cycle (0..255) +====================== ==== ===================================================
drivers/hwmon/Kconfig +10 -0
@@ -345,6 +345,16 @@ config SENSORS_KBATT This driver can also be built as a module. If so, the module will be called kbatt. +config SENSORS_KFAN + tristate "KEBA fan controller support" + depends on KEBA_CP500 + help + This driver supports the fan controller found in KEBA system + FPGA devices. + + This driver can also be built as a module. If so, the module + will be called kfan. + config SENSORS_FAM15H_POWER tristate "AMD Family 15h processor power" depends on X86 && PCI && CPU_SUP_AMD
drivers/hwmon/Makefile +1 -0
@@ -111,6 +111,7 @@ obj-$(CONFIG_SENSORS_JC42) += jc42.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o obj-$(CONFIG_SENSORS_KBATT) += kbatt.o +obj-$(CONFIG_SENSORS_KFAN) += kfan.o obj-$(CONFIG_SENSORS_LAN966X) += lan966x-hwmon.o obj-$(CONFIG_SENSORS_LENOVO_EC) += lenovo-ec-sensors.o obj-$(CONFIG_SENSORS_LINEAGE) += lineage-pem.o
drivers/hwmon/kfan.c new file +243 -0
243 lines not on this page · raw message
Signature · 1 line
2.39.5
Quoted 11 lines · Gerhard Engleder
From: Gerhard Engleder <[email protected]>
The KEBA fan controller is found in the system FPGA of KEBA PLC devices. It detects if the fan is removed or blocked. For fans with tacho signal the monitoring of the speed of the fan is supported. It also supports to regulate the speed of fans with PWM input.
The auxiliary device for this driver is instantiated by the cp500 misc driver.
Signed-off-by Gerhard Engleder <[email protected]>
Applied.
Thanks,
Guenter
Quoted 8 lines · Guenter Roeck
Quoted 7 lines · Gerhard Engleder
From: Gerhard Engleder <[email protected]>
The KEBA fan controller is found in the system FPGA of KEBA PLC devices. It detects if the fan is removed or blocked. For fans with tacho signal the monitoring of the speed of the fan is supported. It also supports to regulate the speed of fans with PWM input.
Quoted 6 lines
Quoted 4 lines
The auxiliary device for this driver is instantiated by the cp500 misc driver.
Signed-off-by Gerhard Engleder <[email protected]>Applied.
Thanks for applying and fixing the fall through warnings of clang!
regards, gerhard