arm64: tegra: p3310: Explicitly enable GPU

The gpu node originally was explicitly left disabled as it was expected for the bootloader to enable it. However, this is only done in u-boot. If u-boot is not in the boot chain, this will never be enabled. Other Tegra186 devices already explicitly enable the gpu, so make p3310 match.

---
 arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

index e2d6857a37097c5acc38dcbfd12800d59510f1c6..8aec6999603059107ba05cdbbe8bb497e3824a06 100644
@@ -191,6 +191,10 @@ pmc@c360000 {
 		nvidia,invert-interrupt;
 	};
 
+	gpu@17000000 {
+		status = "okay";
+	};
+
 	bpmp {
 		i2c {
 			status = "okay";

---
base-commit: 5bc1018675ec28a8a60d83b378d8c3991faa5a27
change-id: 20250426-tx2-gpu-1dfdd8418b11

Best regards,

Aaron Kling <[email protected]>

From: Thierry Reding <[email protected]>

Applied, thanks!

[1/1] arm64: tegra: p3310: Explicitly enable GPU

      commit: 52dedbe81ee5e99b0d44321347fc85417837eea6

Best regards,

Thierry Reding <[email protected]>