k3-j784s4*: Enable ESMs and related PMIC
v3 cover k3-j784s4*: Enable ESMs and related PMIC
This series enables the ESMs and the associated PMIC. Programming these bits is a requirement to make the watchdog actually reset the board.
Series supports WDT reset on all TI platforms based upon J784S4 SOC including cut down (J742S2).
Bootlogs for reset
AM69: https://gist.github.com/uditkumarti/dca2171aafd6d50c82159346f9a0102f#file-am69-L2466
J784S4: https://gist.github.com/uditkumarti/dca2171aafd6d50c82159346f9a0102f#file-j784s4-L2704
J742S2: https://gist.github.com/uditkumarti/dca2171aafd6d50c82159346f9a0102f#file-j742s2-L2614
Changes in v3:
- Rebased to 2025.04
- Link to v2: https://lore.kernel.org/all/[email protected]/
Changes in v2:
- Loop over ESMs, only configure if prior was successful
as without all of them they're not useful (Udit)
- Add am69-sk PMIC ESM node (Udit)
- Link to v1: https://lore.kernel.org/r/[email protected]
Andrew Halaney (2):
arm: dts: k3-am69-r5-evm: Add the PMIC ESM node
configs: j784s4_evm_r5: Enable ESM related configs
Keerthy (1):
board: ti: j784s4: Initialize the ESM & PMIC ESM
Neha Malcom Francis (1):
arm: dts: k3-j784s4-r5-evm: Add the PMIC ESM node
arch/arm/dts/k3-am69-r5-sk.dts | 7 +++++++ arch/arm/dts/k3-j784s4-r5-evm.dts | 7 +++++++ board/ti/j784s4/evm.c | 24 ++++++++++++++++++++++++ configs/j784s4_evm_r5_defconfig | 5 +++++ 4 files changed, 43 insertions(+)
Signature · 1 line
2.34.1
PATCH v3 1/4 arm: dts: k3-j784s4-r5-evm: Add the PMIC ESM node
From: Neha Malcom Francis <[email protected]>
Add the PMIC ESM node which is responsible for triggering the PMIC reset.
--- arch/arm/dts/k3-j784s4-r5-evm.dts | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm/dts/k3-j784s4-r5-evm.dts +7 -0
@@ -10,3 +10,10 @@ #include "k3-j784s4-ddr.dtsi" #include "k3-j784s4-evm-u-boot.dtsi" #include "k3-j784s4-r5.dtsi" + +&tps659413 { + esm: esm { + compatible = "ti,tps659413-esm"; + bootph-pre-ram; + }; +};
Signature · 1 line
2.34.1
PATCH v3 2/4 arm: dts: k3-am69-r5-evm: Add the PMIC ESM node
In reply to Udit KumarFrom: Andrew Halaney <[email protected]>
Add the PMIC ESM node which is responsible for triggering the PMIC reset.
--- arch/arm/dts/k3-am69-r5-sk.dts | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm/dts/k3-am69-r5-sk.dts +7 -0
@@ -10,3 +10,10 @@ #include "k3-j784s4-ddr.dtsi" #include "k3-am69-sk-u-boot.dtsi" #include "k3-j784s4-r5.dtsi" + +&tps659413 { + esm: esm { + compatible = "ti,tps659413-esm"; + bootph-pre-ram; + }; +};
Signature · 1 line
2.34.1
PATCH v3 3/4 board: ti: j784s4: Initialize the ESM & PMIC ESM
In reply to Udit KumarFrom: Keerthy <[email protected]>
Initialize the ESM & PMIC ESM. This allows things like the watchdog to reset the board when tripped.
--- board/ti/j784s4/evm.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
board/ti/j784s4/evm.c +24 -0
@@ -7,6 +7,7 @@* */ +#include <dm.h> #include <efi_loader.h> #include <init.h> #include <spl.h>
@@ -67,4 +68,27 @@ int board_late_init(void)void spl_board_init (void ) { +struct udevice *dev; +int ret; + +if (IS_ENABLED (CONFIG_ESM_K3 )) { +const char *const esms[] = {"esm@700000" ,"esm@40800000" ,"esm@42080000" }; + +for (int i =0 ; i <ARRAY_SIZE (esms); ++i) { + ret =uclass_get_device_by_name (UCLASS_MISC , esms[i], + &dev); +if (ret) { +printf ("MISC init for %s failed: %d\n" , esms[i], ret); +break ; + } + } + } + +if (IS_ENABLED (CONFIG_ESM_PMIC ) && ret ==0 ) { + ret =uclass_get_device_by_driver (UCLASS_MISC , +DM_DRIVER_GET (pmic_esm), + &dev); +if (ret) +printf ("ESM PMIC init failed: %d\n" , ret); + } }
Signature · 1 line
2.34.1
PATCH v3 4/4 configs: j784s4_evm_r5: Enable ESM related configs
In reply to Udit KumarFrom: Andrew Halaney <[email protected]>
Like other TI platforms, let's enable the ESM. This allows the ESM to be programmed during boot, and the PMIC associated with the ESM output, enabling blocks like the RTI watchdogs to actually cause the system to reset.
--- configs/j784s4_evm_r5_defconfig | 5 +++++ 1 file changed, 5 insertions(+)
configs/j784s4_evm_r5_defconfig +5 -0
@@ -125,6 +125,11 @@ CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_SINGLE=y CONFIG_POWER_DOMAIN=y CONFIG_TI_POWER_DOMAIN=y +CONFIG_ESM_K3=y +CONFIG_ESM_PMIC=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_TPS65941=y +CONFIG_DM_REGULATOR_TPS65941=y CONFIG_DM_REGULATOR=y CONFIG_SPL_DM_REGULATOR=y CONFIG_SPL_DM_REGULATOR_TPS6287X=y
Signature · 1 line
2.34.1
Quoted 8 lines · Udit Kumar
This series enables the ESMs and the associated PMIC. Programming these bits is a requirement to make the watchdog actually reset the board.
Series supports WDT reset on all TI platforms based upon J784S4 SOC including cut down (J742S2).
[...]
Applied to u-boot/master, thanks!
[1/4] arm: dts: k3-j784s4-r5-evm: Add the PMIC ESM node
commit: b011053450f8f196c78717956cc0dd25e388f9cf
[2/4] arm: dts: k3-am69-r5-evm: Add the PMIC ESM node
commit: 29e1d5f93826251a61a9b5640727d5b4d3e7fd9c
[3/4] board: ti: j784s4: Initialize the ESM & PMIC ESM
commit: 61c6d134868a7c888a90c9d5612fd18c0274b01e
[4/4] configs: j784s4_evm_r5: Enable ESM related configs
commit: 8de75de3e4529803030e2763d98db3e5aaf6b956Signature · 1 line
Tom