dt-bindings: interrupt-controller: Convert cdns,xtensa-{mx,pic} to DT schema

deleted file mode 100644
index d4de980e55fa..000000000000
@@ -1,18 +0,0 @@
-* Xtensa Interrupt Distributor and Programmable Interrupt Controller (MX)
-
-Required properties:
-- compatible: Should be "cdns,xtensa-mx".
-
-Remaining properties have exact same meaning as in Xtensa PIC
-(see cdns,xtensa-pic.txt).
-
-Examples:
-	pic: pic {
-		compatible = "cdns,xtensa-mx";
-		/* one cell: internal irq number,
-		 * two cells: second cell == 0: internal irq number
-		 *            second cell == 1: external irq number
-		 */
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};

deleted file mode 100644
index 026ef4cfc1d5..000000000000
@@ -1,25 +0,0 @@
-* Xtensa built-in Programmable Interrupt Controller (PIC)
-
-Required properties:
-- compatible: Should be "cdns,xtensa-pic".
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: The number of cells to define the interrupts.
-  It may be either 1 or 2.
-  When it's 1, the first cell is the internal IRQ number.
-  When it's 2, the first cell is the IRQ number, and the second cell
-  specifies whether it's internal (0) or external (1).
-  Periferals are usually connected to a fixed external IRQ, but for different
-  core variants it may be mapped to different internal IRQ.
-  IRQ sensitivity and priority are fixed for each core variant and may not be
-  changed at runtime.
-
-Examples:
-	pic: pic {
-		compatible = "cdns,xtensa-pic";
-		/* one cell: internal irq number,
-		 * two cells: second cell == 0: internal irq number
-		 *            second cell == 1: external irq number
-		 */
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};

50 lines not on this page · raw message