dt-bindings: interrupt-controller: Convert csky,apb-intc to DT schema

deleted file mode 100644
index 44286dcbac62..000000000000
@@ -1,62 +0,0 @@
-==============================
-C-SKY APB Interrupt Controller
-==============================
-
-C-SKY APB Interrupt Controller is a simple soc interrupt controller
-on the apb bus and we only use it as root irq controller.
-
- - csky,apb-intc is used in a lot of csky fpgas and socs, it support 64 irq nums.
- - csky,dual-apb-intc consists of 2 apb-intc and 128 irq nums supported.
- - csky,gx6605s-intc is gx6605s soc internal irq interrupt controller, 64 irq nums.
-
-=============================
-intc node bindings definition
-=============================
-
-	Description: Describes APB interrupt controller
-
-	PROPERTIES
-
-	- compatible
-		Usage: required
-		Value type: <string>
-		Definition: must be "csky,apb-intc"
-				    "csky,dual-apb-intc"
-				    "csky,gx6605s-intc"
-	- #interrupt-cells
-		Usage: required
-		Value type: <u32>
-		Definition: must be <1>
-	- reg
-		Usage: required
-		Value type: <u32 u32>
-		Definition: <phyaddr size> in soc from cpu view
-	- interrupt-controller:
-		Usage: required
-	- csky,support-pulse-signal:
-		Usage: select
-		Description: to support pulse signal flag
-
-Examples:
----------
-
-	intc: interrupt-controller@500000 {
-		compatible = "csky,apb-intc";
-		#interrupt-cells = <1>;
-		reg = <0x00500000 0x400>;
-		interrupt-controller;
-	};
-
-	intc: interrupt-controller@500000 {
-		compatible = "csky,dual-apb-intc";
-		#interrupt-cells = <1>;
-		reg = <0x00500000 0x400>;
-		interrupt-controller;
-	};
-
-	intc: interrupt-controller@500000 {
-		compatible = "csky,gx6605s-intc";
-		#interrupt-cells = <1>;
-		reg = <0x00500000 0x400>;
-		interrupt-controller;
-	};

54 lines not on this page · raw message