dt-bindings: interrupt-controller: Convert faraday,ftintc010 to DT schema
Subsystems (2)
Rob Herring (Arm)
maintainerPATCH 1/1 dt-bindings: interrupt-controller: Convert faraday,ftintc010 to DT schema
Convert the Faraday FTINTC010 interrupt controller binding to schema format. It's a straight-forward conversion of the typical interrupt controller.
Signed-off-by Rob Herring (Arm) <[email protected]>
--- .../faraday,ftintc010.txt | 25 --------- .../faraday,ftintc010.yaml | 51 +++++++++++++++++++ 2 files changed, 51 insertions(+), 25 deletions(-) delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.yaml
Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.txt deleted +0 -25
@@ -1,25 +0,0 @@ -* Faraday Technologt FTINTC010 interrupt controller - -This interrupt controller is a stock IP block from Faraday Technology found -in the Gemini SoCs and other designs. - -Required properties: -- compatible: must be one of - "faraday,ftintc010" - "cortina,gemini-interrupt-controller" (deprecated) -- reg: The register bank for the interrupt controller. -- interrupt-controller: Identifies the node as an interrupt controller -- #interrupt-cells: The number of cells to define the interrupts. - Must be 2 as the controller can specify level or rising edge - IRQs. The bindings follows the standard binding for controllers - with two cells specified in - interrupt-controller/interrupts.txt - -Example: - -interrupt-controller@48000000 { - compatible = "faraday,ftintc010" - reg = <0x48000000 0x1000>; - interrupt-controller; - #interrupt-cells = <2>; -};
Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.yaml new file +51 -0
51 lines not on this page · raw message
Signature · 1 line
2.47.2
Quoted 5 lines · Rob Herring (Arm)
Convert the Faraday FTINTC010 interrupt controller binding to schema format. It's a straight-forward conversion of the typical interrupt controller.
Signed-off-by Rob Herring (Arm) <[email protected]>
Reviewed-by Linus Walleij <[email protected]>
Yours,
Linus Walleij