Skip to contentSkip to conversation

dt-bindings: interrupt-controller: Convert snps,arc700-intc to DT schema

PATCH In review Rob Herring (Arm) 2 participants 2 messages May 5, 2025 – May 25, 2025

Subsystems (3)
Device tree bindings irqchip drivers Synopsys ARC architecture
lore
Share & tools
lore

Rob Herring (Arm)

author maintainer
#0 lore raw

PATCH 1/1 dt-bindings: interrupt-controller: Convert snps,arc700-intc to DT schema

Convert the Arc Core interrupt controller binding to schema format. It's a straight-forward conversion of the typical interrupt controller.

Signed-off-by Rob Herring (Arm) <[email protected]>
---
 .../interrupt-controller/snps,arc700-intc.txt | 24 -----------
 .../snps,arc700-intc.yaml                     | 42 +++++++++++++++++++
 2 files changed, 42 insertions(+), 24 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.yaml
Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt deleted +0 -24
deleted file mode 100644
index 9a5d562435ea..000000000000
@@ -1,24 +0,0 @@
-* ARC700 incore Interrupt Controller
-
-  The core interrupt controller provides 32 prioritised interrupts (2 levels)
-  to ARC700 core.
-
-Properties:
-
-- compatible: "snps,arc700-intc"
-- interrupt-controller: This is an interrupt controller.
-- #interrupt-cells: Must be <1>.
-
-  Single Cell "interrupts" property of a device specifies the IRQ number
-  between 0 to 31
-
-  intc accessed via the special ARC AUX register interface, hence "reg" property
-  is not specified.
-
-Example:
-
-	intc: interrupt-controller {
-		compatible = "snps,arc700-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.yaml new file +42 -0

42 lines not on this page · raw message

Signature · 1 line
2.47.2