dt-bindings: timer: Convert faraday,fttmr010 to DT schema

Convert the Faraday fttmr010 Timer binding to DT schema format. Adjust the compatible string values to match what's in use. The number of interrupts can also be anywhere from 1 to 8. The clock-names order was reversed compared to what's used.

---
 .../bindings/timer/faraday,fttmr010.txt       | 38 --------
 .../bindings/timer/faraday,fttmr010.yaml      | 89 +++++++++++++++++++
 2 files changed, 89 insertions(+), 38 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/timer/faraday,fttmr010.txt
 create mode 100644 Documentation/devicetree/bindings/timer/faraday,fttmr010.yaml

deleted file mode 100644
index 3cb2f4c98d64..000000000000
@@ -1,38 +0,0 @@
-Faraday Technology timer
-
-This timer is a generic IP block from Faraday Technology, embedded in the
-Cortina Systems Gemini SoCs and other designs.
-
-Required properties:
-
-- compatible : Must be one of
-  "faraday,fttmr010"
-  "cortina,gemini-timer", "faraday,fttmr010"
-  "moxa,moxart-timer", "faraday,fttmr010"
-  "aspeed,ast2400-timer"
-  "aspeed,ast2500-timer"
-  "aspeed,ast2600-timer"
-
-- reg : Should contain registers location and length
-- interrupts : Should contain the three timer interrupts usually with
-  flags for falling edge
-
-Optionally required properties:
-
-- clocks : a clock to provide the tick rate for "faraday,fttmr010"
-- clock-names : should be "EXTCLK" and "PCLK" for the external tick timer
-  and peripheral clock respectively, for "faraday,fttmr010"
-- syscon : a phandle to the global Gemini system controller if the compatible
-  type is "cortina,gemini-timer"
-
-Example:
-
-timer@43000000 {
-	compatible = "faraday,fttmr010";
-	reg = <0x43000000 0x1000>;
-	interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
-		   <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
-		   <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
-	clocks = <&extclk>, <&pclk>;
-	clock-names = "EXTCLK", "PCLK";
-};

2.47.2

Yours,
Linus Walleij

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/timer/faraday,fttmr010.example.dtb: timer@43000000 (faraday,fttmr010): clock-names:0: 'PCLK' was expected
from schema $id: http://devicetree.org/schemas/timer/faraday,fttmr010.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/timer/faraday,fttmr010.example.dtb: timer@43000000 (faraday,fttmr010): clock-names:1: 'EXTCLK' was expected
from schema $id: http://devicetree.org/schemas/timer/faraday,fttmr010.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]

The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.