arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-rock3c
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-rock3c
As described in the radxa_rock_3c_v1400_schematic.pdf, the SPI Flash's VCC connector is connected to VCCIO_FLASH and according to the that same schematic, that belongs to the VCC_1V8 power source.
This fixes the following warning:
spi-nor spi4.0: supply vcc not found, using dummy regulator
--- arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts | 1 + 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts +1 -0
@@ -636,6 +636,7 @@ flash@0 { spi-max-frequency = <104000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <1>; + vcc-supply = <&vcc_1v8>; }; };
Signature · 1 line
2.49.0
Quoted 9 lines · Peter Robinson
As described in the radxa_rock_3c_v1400_schematic.pdf, the SPI Flash's VCC connector is connected to
VCCIO_FLASHand according to the that same schematic, that belongs to theVCC_1V8power source.This fixes the following warning:
spi-nor spi4.0: supply vcc not found, using dummy regulator
[...]
Applied, thanks!
[1/1] arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-rock3c
commit: a706a593cb19796f31d3a888423ef1a71885ae72
Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>