dt-bindings: serial: Convert snps,arc-uart to DT schema
Subsystems (2)
Rob Herring (Arm)
maintainerPATCH v2 1/1 dt-bindings: serial: Convert snps,arc-uart to DT schema
Convert the Synopsys ARC UART binding to DT schema. Drop the "aliases" portion which is not relevant to this schema.
Reviewed-by Thierry Reding <[email protected]>
Signed-off-by Rob Herring (Arm) <[email protected]>
---
v2:
- Fix $id path
--- .../devicetree/bindings/serial/arc-uart.txt | 25 --------- .../bindings/serial/snps,arc-uart.yaml | 51 +++++++++++++++++++ 2 files changed, 51 insertions(+), 25 deletions(-) delete mode 100644 Documentation/devicetree/bindings/serial/arc-uart.txt create mode 100644 Documentation/devicetree/bindings/serial/snps,arc-uart.yaml
Documentation/devicetree/bindings/serial/arc-uart.txt deleted +0 -25
@@ -1,25 +0,0 @@ -* Synopsys ARC UART : Non standard UART used in some of the ARC FPGA boards - -Required properties: -- compatible : "snps,arc-uart" -- reg : offset and length of the register set for the device. -- interrupts : device interrupt -- clock-frequency : the input clock frequency for the UART -- current-speed : baud rate for UART - -e.g. - -arcuart0: serial@c0fc1000 { - compatible = "snps,arc-uart"; - reg = <0xc0fc1000 0x100>; - interrupts = <5>; - clock-frequency = <80000000>; - current-speed = <115200>; -}; - -Note: Each port should have an alias correctly numbered in "aliases" node. - -e.g. -aliases { - serial0 = &arcuart0; -};
Documentation/devicetree/bindings/serial/snps,arc-uart.yaml new file +51 -0
51 lines not on this page · raw message
Signature · 1 line
2.47.2
Quoted 5 lines · Rob Herring (Arm)
Convert the Synopsys ARC UART binding to DT schema. Drop the "aliases" portion which is not relevant to this schema.
Reviewed-by Thierry Reding <[email protected]>Signed-off-by Rob Herring (Arm) <[email protected]>
Acked-by Vineet Gupta <[email protected]>
Thx,
-Vineet
Quoted 98 lines
---
v2:
- Fix $id path--- .../devicetree/bindings/serial/arc-uart.txt | 25 --------- .../bindings/serial/snps,arc-uart.yaml | 51 +++++++++++++++++++ 2 files changed, 51 insertions(+), 25 deletions(-) delete mode 100644 Documentation/devicetree/bindings/serial/arc-uart.txt create mode 100644 Documentation/devicetree/bindings/serial/snps,arc-uart.yamlDocumentation/devicetree/bindings/serial/arc-uart.txt deleted +0
-25@@ -1,25 +0,0 @@ -* Synopsys ARC UART : Non standard UART used in some of the ARC FPGA boards - -Required properties: -- compatible : "snps,arc-uart" -- reg : offset and length of the register set for the device. -- interrupts : device interrupt -- clock-frequency : the input clock frequency for the UART -- current-speed : baud rate for UART - -e.g. - -arcuart0: serial@c0fc1000 { - compatible = "snps,arc-uart"; - reg = <0xc0fc1000 0x100>; - interrupts = <5>; - clock-frequency = <80000000>; - current-speed = <115200>; -}; - -Note: Each port should have an alias correctly numbered in "aliases" node. - -e.g. -aliases { - serial0 = &arcuart0; -};Documentation/devicetree/bindings/serial/snps,arc-uart.yaml new file +51
-0@@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/snps,arc-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys ARC UART + +maintainers: + - Vineet Gupta <[email protected]> + +description: + Synopsys ARC UART is a non-standard UART used in some of the ARC FPGA boards. + +allOf: + - $ref: /schemas/serial/serial.yaml# + +properties: + compatible: + const: snps,arc-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-frequency: + description: the input clock frequency for the UART + + current-speed: + description: baud rate for UART + +required: + - compatible + - reg + - interrupts + - clock-frequency + - current-speed + +unevaluatedProperties: false + +examples: + - | + serial@c0fc1000 { + compatible = "snps,arc-uart"; + reg = <0xc0fc1000 0x100>; + interrupts = <5>; + clock-frequency = <80000000>; + current-speed = <115200>; + };