6.12.28-rc1 review

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/bluetooth/btusb.c |    2 ++
 1 file changed, 2 insertions(+)

drivers/bluetooth/btusb.c +2 -0

@@ -371,6 +371,8 @@ static const struct usb_device_id quirks
 	/* QCA WCN785x chipset */
 	{ USB_DEVICE(0x0cf3, 0xe700), .driver_info = BTUSB_QCA_WCN6855 |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe0fc), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #2 lore raw

PATCH 2/164 Bluetooth: btusb: Add one more ID 0x0489:0xe0f3 for Qualcomm WCN785x

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zijun Hu <[email protected]>

[ Upstream commit 45f745dd1ac880ce299c0f92b874cda090ddade6 ]

Add one more part with ID (0x0489, 0xe0f3) to usb_device_id table for Qualcomm WCN785x, and its device info from /sys/kernel/debug/usb/devices is shown below:

T:  Bus=01 Lev=01 Prnt=01 Port=13 Cnt=03 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e0f3 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:  If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  65 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  65 Ivl=1ms

Signed-off-by Zijun Hu <[email protected]>

Signed-off-by Luiz Augusto von Dentz <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/bluetooth/btusb.c |    2 ++
 1 file changed, 2 insertions(+)

drivers/bluetooth/btusb.c +2 -0

@@ -373,6 +373,8 @@ static const struct usb_device_id quirks
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe0fc), .driver_info = BTUSB_QCA_WCN6855 |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe0f3), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #3 lore raw

PATCH 3/164 Bluetooth: btusb: Add one more ID 0x13d3:0x3623 for Qualcomm WCN785x

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zijun Hu <[email protected]>

[ Upstream commit e69bcffce21c649a23645b20eb527b3d1ce6fc49 ]

Add one more part with ID (0x13d3, 0x3623) to usb_device_id table for Qualcomm WCN785x, and its device info from /sys/kernel/debug/usb/devices is shown below:

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3623 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:  If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  65 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  65 Ivl=1ms

Signed-off-by Zijun Hu <[email protected]>

Signed-off-by Luiz Augusto von Dentz <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/bluetooth/btusb.c |    2 ++
 1 file changed, 2 insertions(+)

drivers/bluetooth/btusb.c +2 -0

@@ -375,6 +375,8 @@ static const struct usb_device_id quirks
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe0f3), .driver_info = BTUSB_QCA_WCN6855 |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3623), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #4 lore raw

PATCH 4/164 Bluetooth: btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mark Dietzer <[email protected]>

[ Upstream commit a6587d7ed2cd8341f8a92112ac772f2c44f09824 ]

Adds a new entry with VID 0x2c7c and PID 0x0130 to the btusb quirks table as it uses a Qualcomm WCN785x chipset

The device information from /sys/kernel/debug/usb/devices is provided below:

T:  Bus=01 Lev=01 Prnt=01 Port=04 Cnt=05 Dev#=  7 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0130 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:  If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  65 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  65 Ivl=1ms

Signed-off-by Mark Dietzer <[email protected]>

Signed-off-by Luiz Augusto von Dentz <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/bluetooth/btusb.c |    2 ++
 1 file changed, 2 insertions(+)

drivers/bluetooth/btusb.c +2 -0

@@ -377,6 +377,8 @@ static const struct usb_device_id quirks
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3623), .driver_info = BTUSB_QCA_WCN6855 |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x2c7c, 0x0130), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #5 lore raw

PATCH 5/164 Bluetooth: btusb: Add new VID/PID for WCN785x

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dorian Cruveiller <[email protected]>

[ Upstream commit c7629ccfa175e16bb44a60c469214e1a6051f63d ]

Add VID 0489 & PID e10d for Qualcomm WCN785x USB Bluetooth chip.

The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below.

T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e10d Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:  If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  65 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  65 Ivl=1ms

Signed-off-by Dorian Cruveiller <[email protected]>

Signed-off-by Luiz Augusto von Dentz <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/bluetooth/btusb.c |    2 ++
 1 file changed, 2 insertions(+)

drivers/bluetooth/btusb.c +2 -0

@@ -375,6 +375,8 @@ static const struct usb_device_id quirks
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe0f3), .driver_info = BTUSB_QCA_WCN6855 |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe10d), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3623), .driver_info = BTUSB_QCA_WCN6855 |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x2c7c, 0x0130), .driver_info = BTUSB_QCA_WCN6855 |

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #6 lore raw

PATCH 6/164 Bluetooth: btusb: Add 13 USB device IDs for Qualcomm WCN785x

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zijun Hu <[email protected]>

[ Upstream commit 2dd1c1eee3e496fcc16971be4db5bb792a36025c ]

Add 13 USB device IDs for Qualcomm WCN785x, and these IDs are extracted from Windows driver inf file for various types of WoS (Windows on Snapdragon) laptop.

Signed-off-by Zijun Hu <[email protected]>

Signed-off-by Luiz Augusto von Dentz <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/bluetooth/btusb.c |   26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

drivers/bluetooth/btusb.c +26 -0

@@ -375,12 +375,38 @@ static const struct usb_device_id quirks
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe0f3), .driver_info = BTUSB_QCA_WCN6855 |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe100), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe103), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe10a), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe10d), .driver_info = BTUSB_QCA_WCN6855 |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe11b), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe11c), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe11f), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe141), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe14a), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe14b), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe14d), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3623), .driver_info = BTUSB_QCA_WCN6855 |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3624), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x2c7c, 0x0130), .driver_info = BTUSB_QCA_WCN6855 |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x2c7c, 0x0131), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x2c7c, 0x0132), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #7 lore raw

PATCH 7/164 Revert "rndis_host: Flag RNDIS modems as WWAN devices"

Link https://chaos.social/@gromit/114377862699921553

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christian Heusel <[email protected]>

commit 765f253e28909f161b0211f85cf0431cfee7d6df upstream.

This reverts commit 67d1a8956d2d62fe6b4c13ebabb57806098511d8. Since this commit has been proven to be problematic for the setup of USB-tethered ethernet connections and the related breakage is very noticeable for users it should be reverted until a fixed version of the change can be rolled out.

Closes https://lore.kernel.org/all/[email protected]/ open here

Link https://bugzilla.kernel.org/show_bug.cgi?id=220002

Link https://bugs.gentoo.org/953555

Link https://bbs.archlinux.org/viewtopic.php?id=304892

Acked-by Lubomir Rintel <[email protected]>

Signed-off-by Christian Heusel <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/usb/rndis_host.c |   16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)

drivers/net/usb/rndis_host.c +2 ~~-14~~

@@ -630,16 +630,6 @@ static const struct driver_info	zte_rndi
 	.tx_fixup =	rndis_tx_fixup,
 };
 
-static const struct driver_info	wwan_rndis_info = {
-	.description =	"Mobile Broadband RNDIS device",
-	.flags =	FLAG_WWAN | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT,
-	.bind =		rndis_bind,
-	.unbind =	rndis_unbind,
-	.status =	rndis_status,
-	.rx_fixup =	rndis_rx_fixup,
-	.tx_fixup =	rndis_tx_fixup,
-};
-
 /*-------------------------------------------------------------------------*/
 
 static const struct usb_device_id	products [] = {

@@ -676,11 +666,9 @@ static const struct usb_device_id	produc
 	USB_INTERFACE_INFO(USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
 	.driver_info = (unsigned long) &rndis_info,
 }, {
-	/* Mobile Broadband Modem, seen in Novatel Verizon USB730L and
-	 * Telit FN990A (RNDIS)
-	 */
+	/* Novatel Verizon USB730L */
 	USB_INTERFACE_INFO(USB_CLASS_MISC, 4, 1),
-	.driver_info = (unsigned long)&wwan_rndis_info,
+	.driver_info = (unsigned long) &rndis_info,
 },
 	{ },		// END
 };

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #8 lore raw

PATCH 8/164 ALSA: usb-audio: Add retry on -EPROTO from usb_set_interface()

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Geoffrey D. Bennett <[email protected]>

commit f406005e162b660dc405b4f18bf7bcb93a515608 upstream.

During initialisation of Focusrite USB audio interfaces, -EPROTO is sometimes returned from usb_set_interface(), which sometimes prevents the device from working: subsequent usb_set_interface() and uac_clock_source_is_valid() calls fail.

This patch adds up to 5 retries in endpoint_set_interface(), with a delay starting at 5ms and doubling each time. 5 retries was chosen to allow for longer than expected waits for the interface to start responding correctly; in testing, a single 5ms delay was sufficient to fix the issue.

Closes https://github.com/geoffreybennett/fcp-support/issues/2

Link https://patch.msgid.link/Z//[email protected] open here

Signed-off-by Geoffrey D. Bennett <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 sound/usb/endpoint.c |    7 +++++++
 1 file changed, 7 insertions(+)

sound/usb/endpoint.c +7 -0

@@ -926,6 +926,8 @@ static int endpoint_set_interface(struct
 {
 	int altset = set ? ep->altsetting : 0;
 	int err;
+	int retries = 0;
+	const int max_retries = 5;
 
 	if (ep->iface_ref->altset == altset)
 		return 0;

@@ -935,8 +937,13 @@ static int endpoint_set_interface(struct
 
 	usb_audio_dbg(chip, "Setting usb interface %d:%d for EP 0x%x\n",
 		      ep->iface, altset, ep->ep_num);
+retry:
 	err = usb_set_interface(chip->dev, ep->iface, altset);
 	if (err < 0) {
+		if (err == -EPROTO && ++retries <= max_retries) {
+			msleep(5 * (1 << (retries - 1)));
+			goto retry;
+		}
 		usb_audio_err_ratelimited(
 			chip, "%d:%d: usb_set_interface failed (%d)\n",
 			ep->iface, altset, err);

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #9 lore raw

PATCH 9/164 ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Joachim Priesner <[email protected]>

commit 1149719442d28c96dc63cad432b5a6db7c300e1a upstream.

There seem to be multiple USB device IDs used for these; the one I have reports as 0b0e:030c when powered on. (When powered off, it reports as 0b0e:0311.)

Signed-off-by Joachim Priesner <[email protected]>

Cc <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 sound/usb/format.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

sound/usb/format.c +2 -1

@@ -260,7 +260,8 @@ static int parse_audio_format_rates_v1(s
 	}
 
 	/* Jabra Evolve 65 headset */
-	if (chip->usb_id == USB_ID(0x0b0e, 0x030b)) {
+	if (chip->usb_id == USB_ID(0x0b0e, 0x030b) ||
+	    chip->usb_id == USB_ID(0x0b0e, 0x030c)) {
 		/* only 48kHz for playback while keeping 16kHz for capture */
 		if (fp->nr_rates != 1)
 			return set_fixed_rate(fp, 48000, SNDRV_PCM_RATE_48000);

Greg Kroah-Hartman

author maintainer

2025-05-07 18:58 UTC #10 lore raw

PATCH 10/164 binder: fix offset calculation in debug log

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Carlos Llamas <[email protected]>

commit 170d1a3738908eef6a0dbf378ea77fb4ae8e294d upstream.

The vma start address should be substracted from the buffer's user data address and not the other way around.

Cc Tiffany Y. Yang <[email protected]>

Cc stable <[email protected]>

Fixes 162c79731448 ("binder: avoid user addresses in debug logs")

Signed-off-by Carlos Llamas <[email protected]>

Reviewed-by Tiffany Y. Yang <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

[cmllamas: fix conflicts due to alloc->buffer renaming]

Signed-off-by Carlos Llamas <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/android/binder.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/android/binder.c +1 -1

@@ -6374,7 +6374,7 @@ static void print_binder_transaction_ilo
 		seq_printf(m, " node %d", buffer->target_node->debug_id);
 	seq_printf(m, " size %zd:%zd offset %lx\n",
 		   buffer->data_size, buffer->offsets_size,
-		   proc->alloc.buffer - buffer->user_data);
+		   buffer->user_data - proc->alloc.buffer);
 }
 
 static void print_binder_work_ilocked(struct seq_file *m,

Greg Kroah-Hartman

author maintainer

2025-05-07 18:58 UTC #11 lore raw

PATCH 11/164 btrfs: adjust subpage bit start based on sectorsize

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Josef Bacik <[email protected]>

commit e08e49d986f82c30f42ad0ed43ebbede1e1e3739 upstream.

When running machines with 64k page size and a 16k nodesize we started seeing tree log corruption in production. This turned out to be because we were not writing out dirty blocks sometimes, so this in fact affects all metadata writes.

When writing out a subpage EB we scan the subpage bitmap for a dirty range. If the range isn't dirty we do

	bit_start++;

to move onto the next bit. The problem is the bitmap is based on the number of sectors that an EB has. So in this case, we have a 64k pagesize, 16k nodesize, but a 4k sectorsize. This means our bitmap is 4 bits for every node. With a 64k page size we end up with 4 nodes per page.

To make this easier this is how everything looks

[0         16k       32k       48k     ] logical address
[0         4         8         12      ] radix tree offset
[               64k page               ] folio

Now we use all of our addressing based on fs_info->sectorsize_bits, so as you can see the above our 16k eb->start turns into radix entry 4.

When we find a dirty range for our eb, we correctly do bit_start += sectors_per_node, because if we start at bit 0, the next bit for the next eb is 4, to correspond to eb->start 16k.

However if our range is clean, we will do bit_start++, which will now put us offset from our radix tree entries.

In our case, assume that the first time we check the bitmap the block is not dirty, we increment bit_start so now it == 1, and then we loop around and check again. This time it is dirty, and we go to find that start using the following equation

	start = folio_start + bit_start * fs_info->sectorsize;

so in the case above, eb->start 0 is now dirty, and we calculate start as

	0 + 1 * fs_info->sectorsize = 4096
	4096 >> 12 = 1

Now we're looking up the radix tree for 1, and we won't find an eb. What's worse is now we're using bit_start == 1, so we do bit_start += sectors_per_node, which is now 5. If that eb is dirty we will run into the same thing, we will look at an offset that is not populated in the radix tree, and now we're skipping the writeout of dirty extent buffers.

The best fix for this is to not use sectorsize_bits to address nodes, but that's a larger change. Since this is a fs corruption problem fix it simply by always using sectors_per_node to increment the start bit.

Fixes c4aec299fa8f ("btrfs: introduce submit_eb_subpage() to submit a subpage metadata page")

CC [email protected] # 5.15+

Reviewed-by Boris Burkov <[email protected]>

Reviewed-by Qu Wenruo <[email protected]>

Signed-off-by Josef Bacik <[email protected]>

Signed-off-by David Sterba <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/btrfs/extent_io.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

fs/btrfs/extent_io.c +1 -1

@@ -1870,7 +1870,7 @@ static int submit_eb_subpage(struct foli
 			      subpage->bitmaps)) {
 			spin_unlock_irqrestore(&subpage->lock, flags);
 			spin_unlock(&folio->mapping->i_private_lock);
-			bit_start++;
+			bit_start += sectors_per_node;
 			continue;
 		}

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #12 lore raw

PATCH 12/164 btrfs: fix COW handling in run_delalloc_nocow()

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dave Chen <[email protected]>

commit be3f1938d3e6ea8186f0de3dd95245dda4f22c1e upstream.

In run_delalloc_nocow(), when the found btrfs_key's offset > cur_offset, it indicates a gap between the current processing region and the next file extent. The original code would directly jump to the "must_cow" label, which increments the slot and forces a fallback to COW. This behavior might skip an extent item and result in an overestimated COW fallback range.

This patch modifies the logic so that when a gap is detected:

- If no COW range is already being recorded (cow_start is unset), cow_start is set to cur_offset.

- cur_offset is then advanced to the beginning of the next extent.

- Instead of jumping to "must_cow", control flows directly to "next_slot" so that the same extent item can be reexamined properly.

The change ensures that we accurately account for the extent gap and avoid accidentally extending the range that needs to fallback to COW.

CC [email protected] # 6.6+

Reviewed-by Filipe Manana <[email protected]>

Signed-off-by Dave Chen <[email protected]>

Signed-off-by David Sterba <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/btrfs/inode.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

fs/btrfs/inode.c +5 -4

@@ -2155,12 +2155,13 @@ next_slot:
 
 		/*
 		 * If the found extent starts after requested offset, then
-		 * adjust extent_end to be right before this extent begins
+		 * adjust cur_offset to be right before this extent begins.
 		 */
 		if (found_key.offset > cur_offset) {
-			extent_end = found_key.offset;
-			extent_type = 0;
-			goto must_cow;
+			if (cow_start == (u64)-1)
+				cow_start = cur_offset;
+			cur_offset = found_key.offset;
+			goto next_slot;
 		}
 
 		/*

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #13 lore raw

PATCH 13/164 cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Srinivas Pandruvada <[email protected]>

commit ac4e04d9e378f5aa826c2406ad7871ae1b6a6fb9 upstream.

When turbo mode is unavailable on a Skylake-X system, executing the command:

 # echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo

results in an unchecked MSR access error:

WRMSR to 0x199 (attempted to write 0x0000000100001300).

This issue was reproduced on an OEM (Original Equipment Manufacturer) system and is not a common problem across all Skylake-X systems.

This error occurs because the MSR 0x199 Turbo Engage Bit (bit 32) is set when turbo mode is disabled. The issue arises when intel_pstate fails to detect that turbo mode is disabled. Here intel_pstate relies on MSR_IA32_MISC_ENABLE bit 38 to determine the status of turbo mode. However, on this system, bit 38 is not set even when turbo mode is disabled.

According to the Intel Software Developer's Manual (SDM), the BIOS sets this bit during platform initialization to enable or disable opportunistic processor performance operations. Logically, this bit should be set in such cases. However, the SDM also specifies that "OS and applications must use CPUID leaf 06H to detect processors with opportunistic processor performance operations enabled."

Therefore, in addition to checking MSR_IA32_MISC_ENABLE bit 38, verify that CPUID.06H:EAX[1] is 0 to accurately determine if turbo mode is disabled.

Fixes 4521e1a0ce17 ("cpufreq: intel_pstate: Reflect current no_turbo state correctly")

Signed-off-by Srinivas Pandruvada <[email protected]>

Cc All applicable <[email protected]>

Signed-off-by Rafael J. Wysocki <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/cpufreq/intel_pstate.c |    3 +++
 1 file changed, 3 insertions(+)

drivers/cpufreq/intel_pstate.c +3 -0

@@ -600,6 +600,9 @@ static bool turbo_is_disabled(void)
 {
 	u64 misc_en;
 
+	if (!cpu_feature_enabled(X86_FEATURE_IDA))
+		return true;
+
 	rdmsrl(MSR_IA32_MISC_ENABLE, misc_en);
 
 	return !!(misc_en & MSR_IA32_MISC_ENABLE_TURBO_DISABLE);

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #14 lore raw

PATCH 14/164 drm/fdinfo: Protect against driver unbind

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tvrtko Ursulin <[email protected]>

commit 5b1834d6202f86180e451ad1a2a8a193a1da18fc upstream.

If we unbind a driver from the PCI device with an active DRM client, subsequent read of the fdinfo data associated with the file descriptor in question will not end well.

Protect the path with a drm_dev_enter/exit() pair.

Signed-off-by Tvrtko Ursulin <[email protected]>

Cc Christian König <[email protected]>

Cc Lucas De Marchi <[email protected]>

Cc Rodrigo Vivi <[email protected]>

Cc Umesh Nerlige Ramappa <[email protected]>

Reviewed-by Christian König <[email protected]>

Fixes 3f09a0cd4ea3 ("drm: Add common fdinfo helper")

Cc <[email protected]> # v6.5+

Signed-off-by Christian König <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/gpu/drm/drm_file.c |    6 ++++++
 1 file changed, 6 insertions(+)

drivers/gpu/drm/drm_file.c +6 -0

@@ -938,6 +938,10 @@ void drm_show_fdinfo(struct seq_file *m,
 	struct drm_file *file = f->private_data;
 	struct drm_device *dev = file->minor->dev;
 	struct drm_printer p = drm_seq_file_printer(m);
+	int idx;
+
+	if (!drm_dev_enter(dev, &idx))
+		return;
 
 	drm_printf(&p, "drm-driver:\t%s\n", dev->driver->name);
 	drm_printf(&p, "drm-client-id:\t%llu\n", file->client_id);

@@ -952,6 +956,8 @@ void drm_show_fdinfo(struct seq_file *m,
 
 	if (dev->driver->show_fdinfo)
 		dev->driver->show_fdinfo(&p, file);
+
+	drm_dev_exit(idx);
 }
 EXPORT_SYMBOL(drm_show_fdinfo);

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #15 lore raw

PATCH 15/164 drm/nouveau: Fix WARN_ON in nouveau_fence_context_kill()

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Philipp Stanner <[email protected]>

commit bbe5679f30d7690a9b6838a583b9690ea73fe0e9 upstream.

Nouveau is mostly designed in a way that it's expected that fences only ever get signaled through nouveau_fence_signal(). However, in at least one other place, nouveau_fence_done(), can signal fences, too. If that happens (race) a signaled fence remains in the pending list for a while, until it gets removed by nouveau_fence_update().

Should nouveau_fence_context_kill() run in the meantime, this would be a bug because the function would attempt to set an error code on an already signaled fence.

Have nouveau_fence_context_kill() check for a fence being signaled.

Cc [email protected] # v5.10+

Fixes ea13e5abf807 ("drm/nouveau: signal pending fences when channel has been killed")

Signed-off-by Philipp Stanner <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Danilo Krummrich <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/gpu/drm/nouveau/nouveau_fence.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/gpu/drm/nouveau/nouveau_fence.c +1 -1

@@ -90,7 +90,7 @@ nouveau_fence_context_kill(struct nouvea
 	while (!list_empty(&fctx->pending)) {
 		fence = list_entry(fctx->pending.next, typeof(*fence), head);
 
-		if (error)
+		if (error && !dma_fence_is_signaled_locked(&fence->base))
 			dma_fence_set_error(&fence->base, error);
 
 		if (nouveau_fence_signal(fence))

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #16 lore raw

PATCH 16/164 EDAC/altera: Test the correct error reg offset

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Niravkumar L Rabara <[email protected]>

commit 4fb7b8fceb0beebbe00712c3daf49ade0386076a upstream.

Test correct structure member, ecc_cecnt_offset, before using it.

[ bp: Massage commit message. ]

Fixes 73bcc942f427 ("EDAC, altera: Add Arria10 EDAC support")

Signed-off-by Niravkumar L Rabara <[email protected]>

Signed-off-by Matthew Gerlach <[email protected]>

Signed-off-by Borislav Petkov (AMD) <[email protected]>

Acked-by Dinh Nguyen <[email protected]>

Link https://lore.kernel.org/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/edac/altera_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/edac/altera_edac.c +1 -1

@@ -99,7 +99,7 @@ static irqreturn_t altr_sdram_mc_err_han
 	if (status & priv->ecc_stat_ce_mask) {
 		regmap_read(drvdata->mc_vbase, priv->ecc_saddr_offset,
 			    &err_addr);
-		if (priv->ecc_uecnt_offset)
+		if (priv->ecc_cecnt_offset)
 			regmap_read(drvdata->mc_vbase,  priv->ecc_cecnt_offset,
 				    &err_count);
 		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count,

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #17 lore raw

PATCH 17/164 EDAC/altera: Set DDR and SDMMC interrupt mask before registration

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Niravkumar L Rabara <[email protected]>

commit 6dbe3c5418c4368e824bff6ae4889257dd544892 upstream.

Mask DDR and SDMMC in probe function to avoid spurious interrupts before registration. Removed invalid register write to system manager.

Fixes 1166fde93d5b ("EDAC, altera: Add Arria10 ECC memory init functions")

Signed-off-by Niravkumar L Rabara <[email protected]>

Signed-off-by Matthew Gerlach <[email protected]>

Signed-off-by Borislav Petkov (AMD) <[email protected]>

Acked-by Dinh Nguyen <[email protected]>

Link https://lore.kernel.org/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/edac/altera_edac.c |    7 ++++---
 drivers/edac/altera_edac.h |    2 ++
 2 files changed, 6 insertions(+), 3 deletions(-)

drivers/edac/altera_edac.c +4 -3

@@ -1005,9 +1005,6 @@ altr_init_a10_ecc_block(struct device_no
 		}
 	}
 
-	/* Interrupt mode set to every SBERR */
-	regmap_write(ecc_mgr_map, ALTR_A10_ECC_INTMODE_OFST,
-		     ALTR_A10_ECC_INTMODE);
 	/* Enable ECC */
 	ecc_set_bits(ecc_ctrl_en_mask, (ecc_block_base +
 					ALTR_A10_ECC_CTRL_OFST));

@@ -2127,6 +2124,10 @@ static int altr_edac_a10_probe(struct pl
 		return PTR_ERR(edac->ecc_mgr_map);
 	}
 
+	/* Set irq mask for DDR SBE to avoid any pending irq before registration */
+	regmap_write(edac->ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST,
+		     (A10_SYSMGR_ECC_INTMASK_SDMMCB | A10_SYSMGR_ECC_INTMASK_DDR0));
+
 	edac->irq_chip.name = pdev->dev.of_node->name;
 	edac->irq_chip.irq_mask = a10_eccmgr_irq_mask;
 	edac->irq_chip.irq_unmask = a10_eccmgr_irq_unmask;

drivers/edac/altera_edac.h +2 -0

@@ -249,6 +249,8 @@ struct altr_sdram_mc_data {
 #define A10_SYSMGR_ECC_INTMASK_SET_OFST   0x94
 #define A10_SYSMGR_ECC_INTMASK_CLR_OFST   0x98
 #define A10_SYSMGR_ECC_INTMASK_OCRAM      BIT(1)
+#define A10_SYSMGR_ECC_INTMASK_SDMMCB     BIT(16)
+#define A10_SYSMGR_ECC_INTMASK_DDR0       BIT(17)
 
 #define A10_SYSMGR_ECC_INTSTAT_SERR_OFST  0x9C
 #define A10_SYSMGR_ECC_INTSTAT_DERR_OFST  0xA0

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #18 lore raw

PATCH 18/164 i2c: imx-lpi2c: Fix clock count when probe defers

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Clark Wang <[email protected]>

commit b1852c5de2f2a37dd4462f7837c9e3e678f9e546 upstream.

Deferred probe with pm_runtime_put() may delay clock disable, causing incorrect clock usage count. Use pm_runtime_put_sync() to ensure the clock is disabled immediately.

Fixes 13d6eb20fc79 ("i2c: imx-lpi2c: add runtime pm support")

Signed-off-by Clark Wang <[email protected]>

Signed-off-by Carlos Song <[email protected]>

Cc <[email protected]> # v4.16+

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Andi Shyti <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/i2c/busses/i2c-imx-lpi2c.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/i2c/busses/i2c-imx-lpi2c.c +2 -2

@@ -652,9 +652,9 @@ static int lpi2c_imx_probe(struct platfo
 	return 0;
 
 rpm_disable:
-	pm_runtime_put(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 
 	return ret;
 }

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #19 lore raw

PATCH 19/164 arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Will Deacon <[email protected]>

commit fee4d171451c1ad9e8aaf65fc0ab7d143a33bd72 upstream.

Commit a5951389e58d ("arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists") added some additional CPUs to the Spectre-BHB workaround, including some new arrays for designs that require new 'k' values for the workaround to be effective.

Unfortunately, the new arrays omitted the sentinel entry and so is_midr_in_range_list() will walk off the end when it doesn't find a match. With UBSAN enabled, this leads to a crash during boot when is_midr_in_range_list() is inlined (which was more common prior to c8c2647e69be ("arm64: Make _midr_in_range_list() an exported function")):

 |  Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP
 |  pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 |  pc : spectre_bhb_loop_affected+0x28/0x30
 |  lr : is_spectre_bhb_affected+0x170/0x190
 | [...]
 |  Call trace:
 |   spectre_bhb_loop_affected+0x28/0x30
 |   update_cpu_capabilities+0xc0/0x184
 |   init_cpu_features+0x188/0x1a4
 |   cpuinfo_store_boot_cpu+0x4c/0x60
 |   smp_prepare_boot_cpu+0x38/0x54
 |   start_kernel+0x8c/0x478
 |   __primary_switched+0xc8/0xd4
 |  Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020)
 |  ---[ end trace 0000000000000000 ]---
 |  Kernel panic - not syncing: aarch64 BRK: Fatal exception

Add the missing sentinel entries.

Cc Lee Jones <[email protected]>

Cc James Morse <[email protected]>

Cc Doug Anderson <[email protected]>

Cc Shameer Kolothum <[email protected]>

Cc <[email protected]>

Reported-by Greg Kroah-Hartman <[email protected]>

Fixes a5951389e58d ("arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists")

Signed-off-by Will Deacon <[email protected]>

Reviewed-by Lee Jones <[email protected]>

Reviewed-by Douglas Anderson <[email protected]>

Reviewed-by Greg Kroah-Hartman <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Catalin Marinas <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/arm64/kernel/proton-pack.c |    2 ++
 1 file changed, 2 insertions(+)

arch/arm64/kernel/proton-pack.c +2 -0

@@ -879,10 +879,12 @@ static u8 spectre_bhb_loop_affected(void
 	static const struct midr_range spectre_bhb_k132_list[] = {
 		MIDR_ALL_VERSIONS(MIDR_CORTEX_X3),
 		MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V2),
+		{},
 	};
 	static const struct midr_range spectre_bhb_k38_list[] = {
 		MIDR_ALL_VERSIONS(MIDR_CORTEX_A715),
 		MIDR_ALL_VERSIONS(MIDR_CORTEX_A720),
+		{},
 	};
 	static const struct midr_range spectre_bhb_k32_list[] = {
 		MIDR_ALL_VERSIONS(MIDR_CORTEX_A78),

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #20 lore raw

PATCH 20/164 parisc: Fix double SIGFPE crash

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Helge Deller <[email protected]>

commit de3629baf5a33af1919dec7136d643b0662e85ef upstream.

Camm noticed that on parisc a SIGFPE exception will crash an application with a second SIGFPE in the signal handler. Dave analyzed it, and it happens because glibc uses a double-word floating-point store to atomically update function descriptors. As a result of lazy binding, we hit a floating-point store in fpe_func almost immediately.

When the T bit is set, an assist exception trap occurs when when the co-processor encounters *any* floating-point instruction except for a double store of register %fr0. The latter cancels all pending traps. Let's fix this by clearing the Trap (T) bit in the FP status register before returning to the signal handler in userspace.

The issue can be reproduced with this test program:

root@parisc:~# cat fpe.c

static void fpe_func(int sig, siginfo_t *i, void *v) {
        sigset_t set;
        sigemptyset(&set);
        sigaddset(&set, SIGFPE);
        sigprocmask(SIG_UNBLOCK, &set, NULL);
        printf("GOT signal %d with si_code %ld\n", sig, i->si_code);
}

int main() {
        struct sigaction action = {
                .sa_sigaction = fpe_func,
                .sa_flags = SA_RESTART|SA_SIGINFO };
        sigaction(SIGFPE, &action, 0);
        feenableexcept(FE_OVERFLOW);
        return printf("%lf\n",1.7976931348623158E308*1.7976931348623158E308);
}

root@parisc:~# gcc fpe.c -lm
root@parisc:~# ./a.out
 Floating point exception

root@parisc:~# strace -f ./a.out
 execve("./a.out", ["./a.out"], 0xf9ac7034 /* 20 vars */) = 0
 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
 ...
 rt_sigaction(SIGFPE, {sa_handler=0x1110a, sa_mask=[], sa_flags=SA_RESTART|SA_SIGINFO}, NULL, 8) = 0
 --- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0x1078f} ---
 --- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0xf8f21237} ---
 +++ killed by SIGFPE +++
 Floating point exception

Signed-off-by Helge Deller <[email protected]>

Reported-by Camm Maguire <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/parisc/math-emu/driver.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

arch/parisc/math-emu/driver.c +13 -3

@@ -97,9 +97,19 @@ handle_fpe(struct pt_regs *regs)
 
 	memcpy(regs->fr, frcopy, sizeof regs->fr);
 	if (signalcode != 0) {
-	    force_sig_fault(signalcode >> 24, signalcode & 0xffffff,
-			    (void __user *) regs->iaoq[0]);
-	    return -1;
+		int sig = signalcode >> 24;
+
+		if (sig == SIGFPE) {
+			/*
+			 * Clear floating point trap bit to avoid trapping
+			 * again on the first floating-point instruction in
+			 * the userspace signal handler.
+			 */
+			regs->fr[0] &= ~(1ULL << 38);
+		}
+		force_sig_fault(sig, signalcode & 0xffffff,
+				(void __user *) regs->iaoq[0]);
+		return -1;
 	}
 
 	return signalcode ? -1 : 0;

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #21 lore raw

PATCH 21/164 perf/x86/intel: Only check the group flag for X86 leader

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kan Liang <[email protected]>

commit 75aea4b0656ead0facd13d2aae4cb77326e53d2f upstream.

A warning in intel_pmu_lbr_counters_reorder() may be triggered by below perf command.

perf record -e "{cpu-clock,cycles/call-graph="lbr"/}" -- sleep 1

It's because the group is mistakenly treated as a branch counter group.

The hw.flags of the leader are used to determine whether a group is a branch counters group. However, the hw.flags is only available for a hardware event. The field to store the flags is a union type. For a software event, it's a hrtimer. The corresponding bit may be set if the leader is a software event.

For a branch counter group and other groups that have a group flag (e.g., topdown, PEBS counters snapshotting, and ACR), the leader must be a X86 event. Check the X86 event before checking the flag. The patch only fixes the issue for the branch counter group. The following patch will fix the other groups.

There may be an alternative way to fix the issue by moving the hw.flags out of the union type. It should work for now. But it's still possible that the flags will be used by other types of events later. As long as that type of event is used as a leader, a similar issue will be triggered. So the alternative way is dropped.

Fixes 33744916196b ("perf/x86/intel: Support branch counters logging")

Closes https://lore.kernel.org/lkml/[email protected]/ open here

Reported-by Luo Gengkun <[email protected]>

Signed-off-by Kan Liang <[email protected]>

Signed-off-by Peter Zijlstra (Intel) <[email protected]>

Link https://lkml.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/x86/events/core.c       |    2 +-
 arch/x86/events/perf_event.h |    9 ++++++++-
 2 files changed, 9 insertions(+), 2 deletions(-)

arch/x86/events/core.c +1 -1

@@ -753,7 +753,7 @@ void x86_pmu_enable_all(int added)
 	}
 }
 
-static inline int is_x86_event(struct perf_event *event)
+int is_x86_event(struct perf_event *event)
 {
 	int i;

arch/x86/events/perf_event.h +8 -1

@@ -110,9 +110,16 @@ static inline bool is_topdown_event(stru
 	return is_metric_event(event) || is_slots_event(event);
 }
 
+int is_x86_event(struct perf_event *event);
+
+static inline bool check_leader_group(struct perf_event *leader, int flags)
+{
+	return is_x86_event(leader) ? !!(leader->hw.flags & flags) : false;
+}
+
 static inline bool is_branch_counters_group(struct perf_event *event)
 {
-	return event->group_leader->hw.flags & PERF_X86_EVENT_BRANCH_COUNTERS;
+	return check_leader_group(event->group_leader, PERF_X86_EVENT_BRANCH_COUNTERS);
 }
 
 struct amd_nb {

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #22 lore raw

PATCH 22/164 perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPUs value.

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sean Christopherson <[email protected]>

commit 58f6217e5d0132a9f14e401e62796916aa055c1b upstream.

When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE value. Consulting only the host kernel's host vs. guest masks results in running the guest with PEBS enabled even when the guest doesn't want to use PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply looking at exclude_host can't differentiate between events created by host userspace, and events created by KVM on behalf of the guest.

Running the guest with PEBS unexpectedly enabled typically manifests as crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when trying to record PEBS events.

The issue is most easily reproduced by running perf kvm top from before commit 7b100989b4f6 ("perf evlist: Remove __evlist__add_default") (after
which, perf kvm top effectively stopped using PEBS). The userspace side
of perf creates a guest-only PEBS event, which intel_guest_get_msrs() misconstrues a guest-*owned* PEBS event.

Arguably, this is a userspace bug, as enabling PEBS on guest-only events simply cannot work, and userspace can kill VMs in many other ways (there is no danger to the host). However, even if this is considered to be bad userspace behavior, there's zero downside to perf/KVM restricting PEBS to guest-owned events.

Note, commit 854250329c02 ("KVM: x86/pmu: Disable guest PEBS temporarily in two rare situations") fixed the case where host userspace is profiling KVM *and* userspace, but missed the case where userspace is profiling only KVM.

Fixes c59a1f106f5c ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")

Closes https://lore.kernel.org/all/Z_VUswFkWiTYI0eD@do-x1carbon open here

Reported-by Seth Forshee <[email protected]>

Signed-off-by Sean Christopherson <[email protected]>

Signed-off-by Peter Zijlstra (Intel) <[email protected]>

Reviewed-by Dapeng Mi <[email protected]>

Tested-by "Seth Forshee (DigitalOcean)" <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/x86/events/intel/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

arch/x86/events/intel/core.c +1 -1

@@ -4333,7 +4333,7 @@ static struct perf_guest_switch_msr *int
 	arr[pebs_enable] = (struct perf_guest_switch_msr){
 		.msr = MSR_IA32_PEBS_ENABLE,
 		.host = cpuc->pebs_enabled & ~cpuc->intel_ctrl_guest_mask,
-		.guest = pebs_mask & ~cpuc->intel_ctrl_host_mask,
+		.guest = pebs_mask & ~cpuc->intel_ctrl_host_mask & kvm_pmu->pebs_enable,
 	};
 
 	if (arr[pebs_enable].host) {

Greg Kroah-Hartman

author maintainer

2025-05-07 18:59 UTC #23 lore raw

PATCH 23/164 amd-xgbe: Fix to ensure dependent features are toggled with RX checksum offload

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vishal Badole <[email protected]>

commit f04dd30f1bef1ed2e74a4050af6e5e5e3869bac3 upstream.

According to the XGMAC specification, enabling features such as Layer 3 and Layer 4 Packet Filtering, Split Header and Virtualized Network support automatically selects the IPC Full Checksum Offload Engine on the receive side.

When RX checksum offload is disabled, these dependent features must also be disabled to prevent abnormal behavior caused by mismatched feature dependencies.

Ensure that toggling RX checksum offload (disabling or enabling) properly disables or enables all dependent features, maintaining consistent and expected behavior in the network device.

Fixes 1a510ccf5869 ("amd-xgbe: Add support for VXLAN offload capabilities")

Signed-off-by Vishal Badole <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/ethernet/amd/xgbe/xgbe-desc.c |    9 +++++++--
 drivers/net/ethernet/amd/xgbe/xgbe-dev.c  |   24 ++++++++++++++++++++++--
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c  |   11 +++++++++--
 drivers/net/ethernet/amd/xgbe/xgbe.h      |    4 ++++
 4 files changed, 42 insertions(+), 6 deletions(-)

drivers/net/ethernet/amd/xgbe/xgbe-desc.c +7 -2

@@ -373,8 +373,13 @@ static int xgbe_map_rx_buffer(struct xgb
 	}
 
 	/* Set up the header page info */
-	xgbe_set_buffer_data(&rdata->rx.hdr, &ring->rx_hdr_pa,
-			     XGBE_SKB_ALLOC_SIZE);
+	if (pdata->netdev->features & NETIF_F_RXCSUM) {
+		xgbe_set_buffer_data(&rdata->rx.hdr, &ring->rx_hdr_pa,
+				     XGBE_SKB_ALLOC_SIZE);
+	} else {
+		xgbe_set_buffer_data(&rdata->rx.hdr, &ring->rx_hdr_pa,
+				     pdata->rx_buf_size);
+	}
 
 	/* Set up the buffer page info */
 	xgbe_set_buffer_data(&rdata->rx.buf, &ring->rx_buf_pa,

drivers/net/ethernet/amd/xgbe/xgbe-dev.c +22 -2

@@ -320,6 +320,18 @@ static void xgbe_config_sph_mode(struct
 	XGMAC_IOWRITE_BITS(pdata, MAC_RCR, HDSMS, XGBE_SPH_HDSMS_SIZE);
 }
 
+static void xgbe_disable_sph_mode(struct xgbe_prv_data *pdata)
+{
+	unsigned int i;
+
+	for (i = 0; i < pdata->channel_count; i++) {
+		if (!pdata->channel[i]->rx_ring)
+			break;
+
+		XGMAC_DMA_IOWRITE_BITS(pdata->channel[i], DMA_CH_CR, SPH, 0);
+	}
+}
+
 static int xgbe_write_rss_reg(struct xgbe_prv_data *pdata, unsigned int type,
 			      unsigned int index, unsigned int val)
 {

@@ -3545,8 +3557,12 @@ static int xgbe_init(struct xgbe_prv_dat
 	xgbe_config_tx_coalesce(pdata);
 	xgbe_config_rx_buffer_size(pdata);
 	xgbe_config_tso_mode(pdata);
-	xgbe_config_sph_mode(pdata);
-	xgbe_config_rss(pdata);
+
+	if (pdata->netdev->features & NETIF_F_RXCSUM) {
+		xgbe_config_sph_mode(pdata);
+		xgbe_config_rss(pdata);
+	}
+
 	desc_if->wrapper_tx_desc_init(pdata);
 	desc_if->wrapper_rx_desc_init(pdata);
 	xgbe_enable_dma_interrupts(pdata);

@@ -3702,5 +3718,9 @@ void xgbe_init_function_ptrs_dev(struct
 	hw_if->disable_vxlan = xgbe_disable_vxlan;
 	hw_if->set_vxlan_id = xgbe_set_vxlan_id;
 
+	/* For Split Header*/
+	hw_if->enable_sph = xgbe_config_sph_mode;
+	hw_if->disable_sph = xgbe_disable_sph_mode;
+
 	DBGPR("<--xgbe_init_function_ptrs\n");
 }

drivers/net/ethernet/amd/xgbe/xgbe-drv.c +9 -2

@@ -2257,10 +2257,17 @@ static int xgbe_set_features(struct net_
 	if (ret)
 		return ret;
 
-	if ((features & NETIF_F_RXCSUM) && !rxcsum)
+	if ((features & NETIF_F_RXCSUM) && !rxcsum) {
+		hw_if->enable_sph(pdata);
+		hw_if->enable_vxlan(pdata);
 		hw_if->enable_rx_csum(pdata);
-	else if (!(features & NETIF_F_RXCSUM) && rxcsum)
+		schedule_work(&pdata->restart_work);
+	} else if (!(features & NETIF_F_RXCSUM) && rxcsum) {
+		hw_if->disable_sph(pdata);
+		hw_if->disable_vxlan(pdata);
 		hw_if->disable_rx_csum(pdata);
+		schedule_work(&pdata->restart_work);
+	}
 
 	if ((features & NETIF_F_HW_VLAN_CTAG_RX) && !rxvlan)
 		hw_if->enable_rx_vlan_stripping(pdata);

drivers/net/ethernet/amd/xgbe/xgbe.h +4 -0

@@ -865,6 +865,10 @@ struct xgbe_hw_if {
 	void (*enable_vxlan)(struct xgbe_prv_data *);
 	void (*disable_vxlan)(struct xgbe_prv_data *);
 	void (*set_vxlan_id)(struct xgbe_prv_data *);
+
+	/* For Split Header */
+	void (*enable_sph)(struct xgbe_prv_data *pdata);
+	void (*disable_sph)(struct xgbe_prv_data *pdata);
 };
 
 /* This structure represents implementation specific routines for an

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #24 lore raw

PATCH 24/164 irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stephan Gerhold <[email protected]>

commit 38a05c0b87833f5b188ae43b428b1f792df2b384 upstream.

On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not have a corresponding MPM pin and should not be handled inside the MPM driver. The IRQ domain hierarchy is always applied, so it's required to explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but irq-qcom-mpm is currently missing the check. This is causing crashes when setting up interrupts for non-wake GPIOs:

 root@rb1:~# gpiomon -c gpiochip1 10
   irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1
   Unable to handle kernel paging request at virtual address ffff8000a1dc3820
   Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT)
   pc : mpm_set_type+0x80/0xcc
   lr : mpm_set_type+0x5c/0xcc
   Call trace:
    mpm_set_type+0x80/0xcc (P)
    qcom_mpm_set_type+0x64/0x158
    irq_chip_set_type_parent+0x20/0x38
    msm_gpio_irq_set_type+0x50/0x530
    __irq_set_trigger+0x60/0x184
    __setup_irq+0x304/0x6bc
    request_threaded_irq+0xc8/0x19c
    edge_detector_setup+0x260/0x364
    linereq_create+0x420/0x5a8
    gpio_ioctl+0x2d4/0x6c0

Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that MPM is removed entirely from the hierarchy for non-wake GPIOs.

Fixes a6199bb514d8 ("irqchip: Add Qualcomm MPM controller driver")

Reported-by Alexey Klimov <[email protected]>

Signed-off-by Stephan Gerhold <[email protected]>

Signed-off-by Thomas Gleixner <[email protected]>

Tested-by Alexey Klimov <[email protected]>

Reviewed-by Bartosz Golaszewski <[email protected]>

Link https://lore.kernel.org/all/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/irqchip/irq-qcom-mpm.c |    3 +++
 1 file changed, 3 insertions(+)

drivers/irqchip/irq-qcom-mpm.c +3 -0

@@ -227,6 +227,9 @@ static int qcom_mpm_alloc(struct irq_dom
 	if (ret)
 		return ret;
 
+	if (pin == GPIO_NO_WAKE_IRQ)
+		return irq_domain_disconnect_hierarchy(domain, virq);
+
 	ret = irq_domain_set_hwirq_and_chip(domain, virq, pin,
 					    &qcom_mpm_chip, priv);
 	if (ret)

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #25 lore raw

PATCH 25/164 mm/memblock: pass size instead of end to memblock_set_node()

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wei Yang <[email protected]>

commit 06eaa824fd239edd1eab2754f29b2d03da313003 upstream.

The second parameter of memblock_set_node() is size instead of end.

Since it iterates from lower address to higher address, finally the node id is correct. But during the process, some of them are wrong.

Pass size instead of end.

Fixes 61167ad5fecd ("mm: pass nid to reserve_bootmem_region()")

Signed-off-by Wei Yang <[email protected]>

CC Mike Rapoport <[email protected]>

CC Yajun Deng <[email protected]>

CC [email protected]

Reviewed-by Anshuman Khandual <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Mike Rapoport (Microsoft) <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 mm/memblock.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

mm/memblock.c +1 -1

@@ -2173,7 +2173,7 @@ static void __init memmap_init_reserved_
 		if (memblock_is_nomap(region))
 			reserve_bootmem_region(start, end, nid);
 
-		memblock_set_node(start, end, &memblock.reserved, nid);
+		memblock_set_node(start, region->size, &memblock.reserved, nid);
 	}
 
 	/*

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #26 lore raw

PATCH 26/164 mm/memblock: repeat setting reserved region nid if array is doubled

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wei Yang <[email protected]>

commit eac8ea8736ccc09513152d970eb2a42ed78e87e8 upstream.

Commit 61167ad5fecd ("mm: pass nid to reserve_bootmem_region()") introduce a way to set nid to all reserved region.

But there is a corner case it will leave some region with invalid nid. When memblock_set_node() doubles the array of memblock.reserved, it may lead to a new reserved region before current position. The new region will be left with an invalid node id.

Repeat the process when detecting it.

Fixes 61167ad5fecd ("mm: pass nid to reserve_bootmem_region()")

Signed-off-by Wei Yang <[email protected]>

CC Mike Rapoport <[email protected]>

CC Yajun Deng <[email protected]>

CC [email protected]

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Mike Rapoport (Microsoft) <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 mm/memblock.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

mm/memblock.c +10 -0

@@ -2160,11 +2160,14 @@ static void __init memmap_init_reserved_
 	struct memblock_region *region;
 	phys_addr_t start, end;
 	int nid;
+	unsigned long max_reserved;
 
 	/*
 	 * set nid on all reserved pages and also treat struct
 	 * pages for the NOMAP regions as PageReserved
 	 */
+repeat:
+	max_reserved = memblock.reserved.max;
 	for_each_mem_region(region) {
 		nid = memblock_get_region_node(region);
 		start = region->base;

@@ -2175,6 +2178,13 @@ static void __init memmap_init_reserved_
 
 		memblock_set_node(start, region->size, &memblock.reserved, nid);
 	}
+	/*
+	 * 'max' is changed means memblock.reserved has been doubled its
+	 * array, which may result a new reserved region before current
+	 * 'start'. Now we should repeat the procedure to set its node id.
+	 */
+	if (max_reserved != memblock.reserved.max)
+		goto repeat;
 
 	/*
 	 * initialize struct pages for reserved regions that don't have

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #27 lore raw

PATCH 27/164 mmc: renesas_sdhi: Fix error handling in renesas_sdhi_probe

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ruslan Piasetskyi <[email protected]>

commit 649b50a82f09fa44c2f7a65618e4584072145ab7 upstream.

After moving tmio_mmc_host_probe down, error handling has to be adjusted.

Fixes 74f45de394d9 ("mmc: renesas_sdhi: register irqs before registering controller")

Reviewed-by Ihar Salauyou <[email protected]>

Signed-off-by Ruslan Piasetskyi <[email protected]>

Reviewed-by Geert Uytterhoeven <[email protected]>

Reviewed-by Wolfram Sang <[email protected]>

Tested-by Wolfram Sang <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Ulf Hansson <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/mmc/host/renesas_sdhi_core.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

drivers/mmc/host/renesas_sdhi_core.c +4 -6

@@ -1112,26 +1112,26 @@ int renesas_sdhi_probe(struct platform_d
 	num_irqs = platform_irq_count(pdev);
 	if (num_irqs < 0) {
 		ret = num_irqs;
-		goto eirq;
+		goto edisclk;
 	}
 
 	/* There must be at least one IRQ source */
 	if (!num_irqs) {
 		ret = -ENXIO;
-		goto eirq;
+		goto edisclk;
 	}
 
 	for (i = 0; i < num_irqs; i++) {
 		irq = platform_get_irq(pdev, i);
 		if (irq < 0) {
 			ret = irq;
-			goto eirq;
+			goto edisclk;
 		}
 
 		ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_irq, 0,
 				       dev_name(&pdev->dev), host);
 		if (ret)
-			goto eirq;
+			goto edisclk;
 	}
 
 	ret = tmio_mmc_host_probe(host);

@@ -1143,8 +1143,6 @@ int renesas_sdhi_probe(struct platform_d
 
 	return ret;
 
-eirq:
-	tmio_mmc_host_remove(host);
 edisclk:
 	renesas_sdhi_clk_disable(host);
 efree:

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #28 lore raw

PATCH 28/164 spi: tegra114: Dont fail set_cs_timing when delays are zero

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Aaron Kling <[email protected]>

commit 4426e6b4ecf632bb75d973051e1179b8bfac2320 upstream.

The original code would skip null delay pointers, but when the pointers were converted to point within the spi_device struct, the check was not updated to skip delays of zero. Hence all spi devices that didn't set delays would fail to probe.

Fixes 04e6bb0d6bb1 ("spi: modify set_cs_timing parameter")

Signed-off-by Aaron Kling <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Mark Brown <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/spi/spi-tegra114.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

drivers/spi/spi-tegra114.c +3 -3

@@ -728,9 +728,9 @@ static int tegra_spi_set_hw_cs_timing(st
 	u32 inactive_cycles;
 	u8 cs_state;
 
-	if (setup->unit != SPI_DELAY_UNIT_SCK ||
-	    hold->unit != SPI_DELAY_UNIT_SCK ||
-	    inactive->unit != SPI_DELAY_UNIT_SCK) {
+	if ((setup->unit && setup->unit != SPI_DELAY_UNIT_SCK) ||
+	    (hold->unit && hold->unit != SPI_DELAY_UNIT_SCK) ||
+	    (inactive->unit && inactive->unit != SPI_DELAY_UNIT_SCK)) {
 		dev_err(&spi->dev,
 			"Invalid delay unit %d, should be SPI_DELAY_UNIT_SCK\n",
 			SPI_DELAY_UNIT_SCK);

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #29 lore raw

PATCH 29/164 tracing: Do not take trace_event_sem in print_event_fields()

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Steven Rostedt <[email protected]>

commit 0a8f11f8569e7ed16cbcedeb28c4350f6378fea6 upstream.

On some paths in print_event_fields() it takes the trace_event_sem for read, even though it should always be held when the function is called.

Remove the taking of that mutex and add a lockdep_assert_held_read() to make sure the trace_event_sem is held when print_event_fields() is called.

Cc Masami Hiramatsu <[email protected]>

Cc Mathieu Desnoyers <[email protected]>

Link https://lore.kernel.org/[email protected] open here

Fixes 80a76994b2d88 ("tracing: Add "fields" option to show raw trace event fields")

Reported-by [email protected]

Closes https://lore.kernel.org/all/[email protected]/ open here

Signed-off-by Steven Rostedt (Google) <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 kernel/trace/trace_output.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

kernel/trace/trace_output.c +2 -2

@@ -950,11 +950,12 @@ enum print_line_t print_event_fields(str
 	struct trace_event_call *call;
 	struct list_head *head;
 
+	lockdep_assert_held_read(&trace_event_sem);
+
 	/* ftrace defined events have separate call structures */
 	if (event->type <= __TRACE_LAST_TYPE) {
 		bool found = false;
 
-		down_read(&trace_event_sem);
 		list_for_each_entry(call, &ftrace_events, list) {
 			if (call->event.type == event->type) {
 				found = true;

@@ -964,7 +965,6 @@ enum print_line_t print_event_fields(str
 			if (call->event.type > __TRACE_LAST_TYPE)
 				break;
 		}
-		up_read(&trace_event_sem);
 		if (!found) {
 			trace_seq_printf(&iter->seq, "UNKNOWN TYPE %d\n", event->type);
 			goto out;

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #30 lore raw

PATCH 30/164 wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage()

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wentao Liang <[email protected]>

commit 8e089e7b585d95122c8122d732d1d5ef8f879396 upstream.

The function brcmf_usb_dl_writeimage() calls the function brcmf_usb_dl_cmd() but dose not check its return value. The 'state.state' and the 'state.bytes' are uninitialized if the function brcmf_usb_dl_cmd() fails. It is dangerous to use uninitialized variables in the conditions.

Add error handling for brcmf_usb_dl_cmd() to jump to error handling path if the brcmf_usb_dl_cmd() fails and the 'state.state' and the 'state.bytes' are uninitialized.

Improve the error message to report more detailed error information.

Fixes 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets")

Cc [email protected] # v3.4+

Signed-off-by Wentao Liang <[email protected]>

Acked-by Arend van Spriel <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c +4 -2

@@ -896,14 +896,16 @@ brcmf_usb_dl_writeimage(struct brcmf_usb
 	}
 
 	/* 1) Prepare USB boot loader for runtime image */
-	brcmf_usb_dl_cmd(devinfo, DL_START, &state, sizeof(state));
+	err = brcmf_usb_dl_cmd(devinfo, DL_START, &state, sizeof(state));
+	if (err)
+		goto fail;
 
 	rdlstate = le32_to_cpu(state.state);
 	rdlbytes = le32_to_cpu(state.bytes);
 
 	/* 2) Check we are in the Waiting state */
 	if (rdlstate != DL_WAITING) {
-		brcmf_err("Failed to DL_START\n");
+		brcmf_err("Invalid DL state: %u\n", rdlstate);
 		err = -EINVAL;
 		goto fail;
 	}

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #31 lore raw

PATCH 31/164 x86/boot/sev: Support memory acceptance in the EFI stub under SVSM

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ard Biesheuvel <[email protected]>

commit 8ed12ab1319b2d8e4a529504777aacacf71371e4 upstream.

Commit:

d54d610243a4 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance")

provided a fix for SEV-SNP memory acceptance from the EFI stub when running at VMPL #0. However, that fix was insufficient for SVSM SEV-SNP guests running at VMPL >0, as those rely on a SVSM calling area, which is a shared buffer whose address is programmed into a SEV-SNP MSR, and the SEV init code that sets up this calling area executes much later during the boot.

Given that booting via the EFI stub at VMPL >0 implies that the firmware has configured this calling area already, reuse it for performing memory acceptance in the EFI stub.

Fixes fcd042e86422 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0")

Tested-by Tom Lendacky <[email protected]>

Co-developed-by Tom Lendacky <[email protected]>

Signed-off-by Tom Lendacky <[email protected]>

Signed-off-by Ard Biesheuvel <[email protected]>

Signed-off-by Ingo Molnar <[email protected]>

Cc <[email protected]>

Cc Dionna Amalie Glaze <[email protected]>

Cc Kevin Loughlin <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/x86/boot/compressed/mem.c |    5 +----
 arch/x86/boot/compressed/sev.c |   40 ++++++++++++++++++++++++++++++++++++++++
 arch/x86/boot/compressed/sev.h |    2 ++
 3 files changed, 43 insertions(+), 4 deletions(-)

arch/x86/boot/compressed/mem.c +1 -4

@@ -34,14 +34,11 @@ static bool early_is_tdx_guest(void)
 
 void arch_accept_memory(phys_addr_t start, phys_addr_t end)
 {
-	static bool sevsnp;
-
 	/* Platform-specific memory-acceptance call goes here */
 	if (early_is_tdx_guest()) {
 		if (!tdx_accept_memory(start, end))
 			panic("TDX: Failed to accept memory\n");
-	} else if (sevsnp || (sev_get_status() & MSR_AMD64_SEV_SNP_ENABLED)) {
-		sevsnp = true;
+	} else if (early_is_sevsnp_guest()) {
 		snp_accept_memory(start, end);
 	} else {
 		error("Cannot accept memory: unknown platform\n");

arch/x86/boot/compressed/sev.c +40 -0

@@ -644,3 +644,43 @@ void sev_prep_identity_maps(unsigned lon
 
 	sev_verify_cbit(top_level_pgt);
 }
+
+bool early_is_sevsnp_guest(void)
+{
+	static bool sevsnp;
+
+	if (sevsnp)
+		return true;
+
+	if (!(sev_get_status() & MSR_AMD64_SEV_SNP_ENABLED))
+		return false;
+
+	sevsnp = true;
+
+	if (!snp_vmpl) {
+		unsigned int eax, ebx, ecx, edx;
+
+		/*
+		 * CPUID Fn8000_001F_EAX[28] - SVSM support
+		 */
+		eax = 0x8000001f;
+		ecx = 0;
+		native_cpuid(&eax, &ebx, &ecx, &edx);
+		if (eax & BIT(28)) {
+			struct msr m;
+
+			/* Obtain the address of the calling area to use */
+			boot_rdmsr(MSR_SVSM_CAA, &m);
+			boot_svsm_caa = (void *)m.q;
+			boot_svsm_caa_pa = m.q;
+
+			/*
+			 * The real VMPL level cannot be discovered, but the
+			 * memory acceptance routines make no use of that so
+			 * any non-zero value suffices here.
+			 */
+			snp_vmpl = U8_MAX;
+		}
+	}
+	return true;
+}

arch/x86/boot/compressed/sev.h +2 -0

@@ -13,12 +13,14 @@
 bool sev_snp_enabled(void);
 void snp_accept_memory(phys_addr_t start, phys_addr_t end);
 u64 sev_get_status(void);
+bool early_is_sevsnp_guest(void);
 
 #else
 
 static inline bool sev_snp_enabled(void) { return false; }
 static inline void snp_accept_memory(phys_addr_t start, phys_addr_t end) { }
 static inline u64 sev_get_status(void) { return 0; }
+static inline bool early_is_sevsnp_guest(void) { return false; }
 
 #endif

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #32 lore raw

PATCH 32/164 dm-bufio: dont schedule in atomic context

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: LongPing Wei <[email protected]>

commit a3d8f0a7f5e8b193db509c7191fefeed3533fc44 upstream.

A BUG was reported as below when CONFIG_DEBUG_ATOMIC_SLEEP and try_verify_in_tasklet are enabled.

[  129.444685][  T934] BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2421
[  129.444723][  T934] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 934, name: kworker/1:4
[  129.444740][  T934] preempt_count: 201, expected: 0
[  129.444756][  T934] RCU nest depth: 0, expected: 0
[  129.444781][  T934] Preemption disabled at:
[  129.444789][  T934] [<ffffffd816231900>] shrink_work+0x21c/0x248
[  129.445167][  T934] kernel BUG at kernel/sched/walt/walt_debug.c:16!
[  129.445183][  T934] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
[  129.445204][  T934] Skip md ftrace buffer dump for: 0x1609e0
[  129.447348][  T934] CPU: 1 PID: 934 Comm: kworker/1:4 Tainted: G        W  OE      6.6.56-android15-8-o-g6f82312b30b9-debug #1 1400000003000000474e5500b3187743670464e8
[  129.447362][  T934] Hardware name: Qualcomm Technologies, Inc. Parrot QRD, Alpha-M (DT)
[  129.447373][  T934] Workqueue: dm_bufio_cache shrink_work
[  129.447394][  T934] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  129.447406][  T934] pc : android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug]
[  129.447435][  T934] lr : __traceiter_android_rvh_schedule_bug+0x44/0x6c
[  129.447451][  T934] sp : ffffffc0843dbc90
[  129.447459][  T934] x29: ffffffc0843dbc90 x28: ffffffffffffffff x27: 0000000000000c8b
[  129.447479][  T934] x26: 0000000000000040 x25: ffffff804b3d6260 x24: ffffffd816232b68
[  129.447497][  T934] x23: ffffff805171c5b4 x22: 0000000000000000 x21: ffffffd816231900
[  129.447517][  T934] x20: ffffff80306ba898 x19: 0000000000000000 x18: ffffffc084159030
[  129.447535][  T934] x17: 00000000d2b5dd1f x16: 00000000d2b5dd1f x15: ffffffd816720358
[  129.447554][  T934] x14: 0000000000000004 x13: ffffff89ef978000 x12: 0000000000000003
[  129.447572][  T934] x11: ffffffd817a823c4 x10: 0000000000000202 x9 : 7e779c5735de9400
[  129.447591][  T934] x8 : ffffffd81560d004 x7 : 205b5d3938373434 x6 : ffffffd8167397c8
[  129.447610][  T934] x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffffffc0843db9e0
[  129.447629][  T934] x2 : 0000000000002f15 x1 : 0000000000000000 x0 : 0000000000000000
[  129.447647][  T934] Call trace:
[  129.447655][  T934]  android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug 1400000003000000474e550080cce8a8a78606b6]
[  129.447681][  T934]  __might_resched+0x190/0x1a8
[  129.447694][  T934]  shrink_work+0x180/0x248
[  129.447706][  T934]  process_one_work+0x260/0x624
[  129.447718][  T934]  worker_thread+0x28c/0x454
[  129.447729][  T934]  kthread+0x118/0x158
[  129.447742][  T934]  ret_from_fork+0x10/0x20
[  129.447761][  T934] Code: ???????? ???????? ???????? d2b5dd1f (d4210000)
[  129.447772][  T934] ---[ end trace 0000000000000000 ]---

dm_bufio_lock will call spin_lock_bh when try_verify_in_tasklet is enabled, and __scan will be called in atomic context.

Fixes 7cd326747f46 ("dm bufio: remove dm_bufio_cond_resched()")

Signed-off-by LongPing Wei <[email protected]>

Signed-off-by Mikulas Patocka <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/md/dm-bufio.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

drivers/md/dm-bufio.c +8 -1

@@ -68,6 +68,8 @@
 #define LIST_DIRTY	1
 #define LIST_SIZE	2
 
+#define SCAN_RESCHED_CYCLE	16
+
 /*--------------------------------------------------------------*/
 
 /*

@@ -2414,7 +2416,12 @@ static void __scan(struct dm_bufio_clien
 
 			atomic_long_dec(&c->need_shrink);
 			freed++;
-			cond_resched();
+
+			if (unlikely(freed % SCAN_RESCHED_CYCLE == 0)) {
+				dm_bufio_unlock(c);
+				cond_resched();
+				dm_bufio_lock(c);
+			}
 		}
 	}
 }

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #33 lore raw

PATCH 33/164 dm-integrity: fix a warning on invalid table line

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <[email protected]>

commit 0a533c3e4246c29d502a7e0fba0e86d80a906b04 upstream.

If we use the 'B' mode and we have an invalit table line, cancel_delayed_work_sync would trigger a warning. This commit avoids the warning.

Signed-off-by Mikulas Patocka <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/md/dm-integrity.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/md/dm-integrity.c +1 -1

@@ -5173,7 +5173,7 @@ static void dm_integrity_dtr(struct dm_t
 	BUG_ON(!RB_EMPTY_ROOT(&ic->in_progress));
 	BUG_ON(!list_empty(&ic->wait_list));
 
-	if (ic->mode == 'B')
+	if (ic->mode == 'B' && ic->bitmap_flush_work.work.func)
 		cancel_delayed_work_sync(&ic->bitmap_flush_work);
 	if (ic->metadata_wq)
 		destroy_workqueue(ic->metadata_wq);

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #34 lore raw

PATCH 34/164 dm: always update the array size in realloc_argv on success

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Benjamin Marzinski <[email protected]>

commit 5a2a6c428190f945c5cbf5791f72dbea83e97f66 upstream.

realloc_argv() was only updating the array size if it was called with old_argv already allocated. The first time it was called to create an argv array, it would allocate the array but return the array size as zero. dm_split_args() would think that it couldn't store any arguments in the array and would call realloc_argv() again, causing it to reallocate the initial slots (this time using GPF_KERNEL) and finally return a size. Aside from being wasteful, this could cause deadlocks on targets that need to process messages without starting new IO. Instead, realloc_argv should always update the allocated array size on success.

Fixes a0651926553c ("dm table: don't copy from a NULL pointer in realloc_argv()")

Signed-off-by Benjamin Marzinski <[email protected]>

Signed-off-by Mikulas Patocka <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/md/dm-table.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

drivers/md/dm-table.c +3 -2

@@ -523,9 +523,10 @@ static char **realloc_argv(unsigned int
 		gfp = GFP_NOIO;
 	}
 	argv = kmalloc_array(new_size, sizeof(*argv), gfp);
-	if (argv && old_argv) {
-		memcpy(argv, old_argv, *size * sizeof(*argv));
+	if (argv) {
 		*size = new_size;
+		if (old_argv)
+			memcpy(argv, old_argv, *size * sizeof(*argv));
 	}
 
 	kfree(old_argv);

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #35 lore raw

PATCH 35/164 drm/amdgpu: Fix offset for HDP remap in nbio v7.11

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lijo Lazar <[email protected]>

commit 79af0604eb80ca1f86a1f265a0b1f9d4fccbc18f upstream.

APUs in passthrough mode use HDP flush. 0x7F000 offset used for remapping HDP flush is mapped to VPE space which could get power gated. Use another unused offset in BIF space.

Signed-off-by Lijo Lazar <[email protected]>

Acked-by Alex Deucher <[email protected]>

Signed-off-by Alex Deucher <[email protected]>

(cherry picked from commit d8116a32cdbe456c7f511183eb9ab187e3d590fb)

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/gpu/drm/amd/amdgpu/nbio_v7_11.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/gpu/drm/amd/amdgpu/nbio_v7_11.c +1 -1

@@ -361,7 +361,7 @@ static void nbio_v7_11_get_clockgating_s
 		*flags |= AMD_CG_SUPPORT_BIF_LS;
 }
 
-#define MMIO_REG_HOLE_OFFSET (0x80000 - PAGE_SIZE)
+#define MMIO_REG_HOLE_OFFSET 0x44000
 
 static void nbio_v7_11_set_reg_remap(struct amdgpu_device *adev)
 {

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #36 lore raw

PATCH 36/164 drm: Select DRM_KMS_HELPER from DRM_DEBUG_DP_MST_TOPOLOGY_REFS

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Janne Grunau <[email protected]>

commit 32dce6b1949a696dc7abddc04de8cbe35c260217 upstream.

Using "depends on" and "select" for the same Kconfig symbol is known to cause circular dependencies (cmp. "Kconfig recursive dependency limitations" in Documentation/kbuild/kconfig-language.rst. DRM drivers are selecting drm helpers so do the same for DRM_DEBUG_DP_MST_TOPOLOGY_REFS.
Fixes following circular dependency reported on x86 for the downstream Asahi Linux tree:

error: recursive dependency detected!
symbol DRM_KMS_HELPER is selected by DRM_GEM_SHMEM_HELPER
symbol DRM_GEM_SHMEM_HELPER is selected by RUST_DRM_GEM_SHMEM_HELPER symbol RUST_DRM_GEM_SHMEM_HELPER is selected by DRM_ASAHI
symbol DRM_ASAHI depends on RUST
symbol RUST depends on CALL_PADDING
symbol CALL_PADDING depends on OBJTOOL
symbol OBJTOOL is selected by STACK_VALIDATION
symbol STACK_VALIDATION depends on UNWINDER_FRAME_POINTER
symbol UNWINDER_FRAME_POINTER is part of choice block at arch/x86/Kconfig.debug:224 symbol <choice> unknown is visible depending on UNWINDER_GUESS
symbol UNWINDER_GUESS prompt is visible depending on STACKDEPOT symbol STACKDEPOT is selected by DRM_DEBUG_DP_MST_TOPOLOGY_REFS symbol DRM_DEBUG_DP_MST_TOPOLOGY_REFS depends on DRM_KMS_HELPER

Fixes 12a280c72868 ("drm/dp_mst: Add topology ref history tracking for debugging")

Link https://lore.kernel.org/r/20250304-drm_debug_dp_mst_topo_kconfig-v1-1-e16fd152f258@jannau.net open here

Signed-off-by Janne Grunau <[email protected]>

Acked-by Thomas Zimmermann <[email protected]>

Signed-off-by Alyssa Rosenzweig <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/gpu/drm/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/gpu/drm/Kconfig +1 -1

@@ -185,7 +185,7 @@ config DRM_DEBUG_DP_MST_TOPOLOGY_REFS
         bool "Enable refcount backtrace history in the DP MST helpers"
 	depends on STACKTRACE_SUPPORT
         select STACKDEPOT
-        depends on DRM_KMS_HELPER
+        select DRM_KMS_HELPER
         depends on DEBUG_KERNEL
         depends on EXPERT
         help

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #37 lore raw

PATCH 37/164 iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pavel Paklov <[email protected]>

commit 8dee308e4c01dea48fc104d37f92d5b58c50b96c upstream.

There is a string parsing logic error which can lead to an overflow of hid or uid buffers. Comparing ACPIID_LEN against a total string length doesn't take into account the lengths of individual hid and uid buffers so the check is insufficient in some cases. For example if the length of hid string is 4 and the length of the uid string is 260, the length of str will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer which size is 256.

The same applies to the hid string with length 13 and uid string with length 250.

Check the length of hid and uid strings separately to prevent buffer overflow.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes ca3bf5d47cec ("iommu/amd: Introduces ivrs_acpihid kernel parameter")

Signed-off-by Pavel Paklov <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Joerg Roedel <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/iommu/amd/init.c |    8 ++++++++
 1 file changed, 8 insertions(+)

drivers/iommu/amd/init.c +8 -0

@@ -3655,6 +3655,14 @@ found:
 	while (*uid == '0' && *(uid + 1))
 		uid++;
 
+	if (strlen(hid) >= ACPIHID_HID_LEN) {
+		pr_err("Invalid command line: hid is too long\n");
+		return 1;
+	} else if (strlen(uid) >= ACPIHID_UID_LEN) {
+		pr_err("Invalid command line: uid is too long\n");
+		return 1;
+	}
+
 	i = early_acpihid_map_size++;
 	memcpy(early_acpihid_map[i].hid, hid, strlen(hid));
 	memcpy(early_acpihid_map[i].uid, uid, strlen(uid));

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #38 lore raw

PATCH 38/164 iommu/arm-smmu-v3: Fix iommu_device_probe bug due to duplicated stream ids

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nicolin Chen <[email protected]>

commit b00d24997a11c10d3e420614f0873b83ce358a34 upstream.

ASPEED VGA card has two built-in devices:
0008:06:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge (rev 06) 0008:07:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 52)

Its toplogy looks like this:

 +-[0008:00]---00.0-[01-09]--+-00.0-[02-09]--+-00.0-[03]----00.0  Sandisk Corp Device 5017
                             |               +-01.0-[04]--
                             |               +-02.0-[05]----00.0  NVIDIA Corporation Device
                             |               +-03.0-[06-07]----00.0-[07]----00.0  ASPEED Technology, Inc. ASPEED Graphics Family
                             |               +-04.0-[08]----00.0  Renesas Technology Corp. uPD720201 USB 3.0 Host Controller
                             |               \-05.0-[09]----00.0  Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
                             \-00.1  PMC-Sierra Inc. Device 4028

The IORT logic populaties two identical IDs into the fwspec->ids array via DMA aliasing in iort_pci_iommu_init() called by pci_for_each_dma_alias().

Though the SMMU driver had been able to handle this situation since commit 563b5cbe334e ("iommu/arm-smmu-v3: Cope with duplicated Stream IDs"), that got broken by the later commit cdf315f907d4 ("iommu/arm-smmu-v3: Maintain a SID->device structure"), which ended up with allocating separate streams with the same stuffing.

On a kernel prior to v6.15-rc1, there has been an overlooked warning:
pci 0008:07:00.0: vgaarb: setting as boot VGA device
pci 0008:07:00.0: vgaarb: bridge control possible
pci 0008:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none pcieport 0008:06:00.0: Adding to iommu group 14
ast 0008:07:00.0: stream 67328 already in tree <===== WARNING
ast 0008:07:00.0: enabling device (0002 -> 0003)
ast 0008:07:00.0: Using default configuration
ast 0008:07:00.0: AST 2600 detected
ast 0008:07:00.0: [drm] Using analog VGA
ast 0008:07:00.0: [drm] dram MCLK=396 Mhz type=1 bus_width=16 [drm] Initialized ast 0.1.0 for 0008:07:00.0 on minor 0
ast 0008:07:00.0: [drm] fb0: astdrmfb frame buffer device

With v6.15-rc, since the commit bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path"), the error returned with the warning is moved to the SMMU device probe flow:

  arm_smmu_probe_device+0x15c/0x4c0
  __iommu_probe_device+0x150/0x4f8
  probe_iommu_group+0x44/0x80
  bus_for_each_dev+0x7c/0x100
  bus_iommu_probe+0x48/0x1a8
  iommu_device_register+0xb8/0x178
  arm_smmu_device_probe+0x1350/0x1db0

which then fails the entire SMMU driver probe:
pci 0008:06:00.0: Adding to iommu group 21
pci 0008:07:00.0: stream 67328 already in tree
arm-smmu-v3 arm-smmu-v3.9.auto: Failed to register iommu
arm-smmu-v3 arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22

Since SMMU driver had been already expecting a potential duplicated Stream ID in arm_smmu_install_ste_for_dev(), change the arm_smmu_insert_master() routine to ignore a duplicated ID from the fwspec->sids array as well.

Note: this has been failing the iommu_device_probe() since 2021, although a recent iommu commit in v6.15-rc1 that moves iommu_device_probe() started to fail the SMMU driver probe. Since nobody has cared about DMA Alias support, leave that as it was but fix the fundamental iommu_device_probe() breakage.

Fixes cdf315f907d4 ("iommu/arm-smmu-v3: Maintain a SID->device structure")

Reviewed-by Jason Gunthorpe <[email protected]>

Signed-off-by Nicolin Chen <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Will Deacon <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c |   19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +15 -4

@@ -3220,6 +3220,7 @@ static int arm_smmu_insert_master(struct
 	mutex_lock(&smmu->streams_mutex);
 	for (i = 0; i < fwspec->num_ids; i++) {
 		struct arm_smmu_stream *new_stream = &master->streams[i];
+		struct rb_node *existing;
 		u32 sid = fwspec->ids[i];
 
 		new_stream->id = sid;

@@ -3230,10 +3231,20 @@ static int arm_smmu_insert_master(struct
 			break;
 
 		/* Insert into SID tree */
-		if (rb_find_add(&new_stream->node, &smmu->streams,
-				arm_smmu_streams_cmp_node)) {
-			dev_warn(master->dev, "stream %u already in tree\n",
-				 sid);
+		existing = rb_find_add(&new_stream->node, &smmu->streams,
+				       arm_smmu_streams_cmp_node);
+		if (existing) {
+			struct arm_smmu_master *existing_master =
+				rb_entry(existing, struct arm_smmu_stream, node)
+					->master;
+
+			/* Bridged PCI devices may end up with duplicated IDs */
+			if (existing_master == master)
+				continue;
+
+			dev_warn(master->dev,
+				 "stream %u already in tree from dev %s\n", sid,
+				 dev_name(existing_master->dev));
 			ret = -EINVAL;
 			break;
 		}

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #39 lore raw

PATCH 39/164 iommu/arm-smmu-v3: Fix pgsize_bit for sva domains

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Balbir Singh <[email protected]>

commit 12f78021973ae422564b234136c702a305932d73 upstream.

UBSan caught a bug with IOMMU SVA domains, where the reported exponent value in __arm_smmu_tlb_inv_range() was >= 64. __arm_smmu_tlb_inv_range() uses the domain's pgsize_bitmap to compute the number of pages to invalidate and the invalidation range. Currently arm_smmu_sva_domain_alloc() does not setup the iommu domain's pgsize_bitmap. This leads to __ffs() on the value returning 64 and that leads to undefined behaviour w.r.t. shift operations

Fix this by initializing the iommu_domain's pgsize_bitmap to PAGE_SIZE. Effectively the code needs to use the smallest page size for invalidation

Fixes eb6c97647be2 ("iommu/arm-smmu-v3: Avoid constructing invalid range commands")

Signed-off-by Balbir Singh <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

Cc Jean-Philippe Brucker <[email protected]>

Cc Will Deacon <[email protected]>

Cc Robin Murphy <[email protected]>

Cc Joerg Roedel <[email protected]>

Cc Jason Gunthorpe <[email protected]>

Reviewed-by Jason Gunthorpe <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Will Deacon <[email protected]>

---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c |    6 ++++++
 1 file changed, 6 insertions(+)

drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c +6 -0

@@ -397,6 +397,12 @@ struct iommu_domain *arm_smmu_sva_domain
 		return ERR_CAST(smmu_domain);
 	smmu_domain->domain.type = IOMMU_DOMAIN_SVA;
 	smmu_domain->domain.ops = &arm_smmu_sva_domain_ops;
+
+	/*
+	 * Choose page_size as the leaf page size for invalidation when
+	 * ARM_SMMU_FEAT_RANGE_INV is present
+	 */
+	smmu_domain->domain.pgsize_bitmap = PAGE_SIZE;
 	smmu_domain->smmu = smmu;
 
 	ret = xa_alloc(&arm_smmu_asid_xa, &asid, smmu_domain,

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #40 lore raw

PATCH 40/164 iommu/vt-d: Apply quirk_iommu_igfx for 8086:0044 (QM57/QS57)

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mingcong Bai <[email protected]>

commit 2c8a7c66c90832432496616a9a3c07293f1364f3 upstream.

On the Lenovo ThinkPad X201, when Intel VT-d is enabled in the BIOS, the kernel boots with errors related to DMAR, the graphical interface appeared quite choppy, and the system resets erratically within a minute after it booted:

DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write NO_PASID] Request device [00:02.0] fault addr 0xb97ff000 [fault reason 0x05] PTE Write access is not set

Upon comparing boot logs with VT-d on/off, I found that the Intel Calpella quirk (`quirk_calpella_no_shadow_gtt()') correctly applied the igfx IOMMU disable/quirk correctly:

pci 0000:00:00.0: DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics

Whereas with VT-d on, it went into the "else" branch, which then triggered the DMAR handling fault above:

... else if (!disable_igfx_iommu) {
	/* we have to ensure the gfx device is idle before we flush */
	pci_info(dev, "Disabling batched IOTLB flush on Ironlake\n");
	iommu_set_dma_strict();
}

Now, this is not exactly scientific, but moving 0x0044 to quirk_iommu_igfx seems to have fixed the aforementioned issue. Running a few `git blame' runs on the function, I have found that the quirk was originally introduced as a fix specific to ThinkPad X201:

commit 9eecabcb9a92 ("intel-iommu: Abort IOMMU setup for igfx if BIOS gave no shadow GTT space")

Which was later revised twice to the "else" branch we saw above:

- 2011: commit 6fbcfb3e467a ("intel-iommu: Workaround IOTLB hang on Ironlake GPU")
- 2024: commit ba00196ca41c ("iommu/vt-d: Decouple igfx_off from graphic identity mapping")

I'm uncertain whether further testings on this particular laptops were done in 2011 and (honestly I'm not sure) 2024, but I would be happy to do some distro-specific testing if that's what would be required to verify this patch.

P.S., I also see IDs 0x0040, 0x0062, and 0x006a listed under the same `quirk_calpella_no_shadow_gtt()' quirk, but I'm not sure how similar these chipsets are (if they share the same issue with VT-d or even, indeed, if this issue is specific to a bug in the Lenovo BIOS). With regards to 0x0062, it seems to be a Centrino wireless card, but not a chipset?

I have also listed a couple (distro and kernel) bug reports below as references (some of them are from 7-8 years ago!), as they seem to be similar issue found on different Westmere/Ironlake, Haswell, and Broadwell hardware setups.

Link https://groups.google.com/g/qubes-users/c/4NP4goUds2c?pli=1

Fixes 6fbcfb3e467a ("intel-iommu: Workaround IOTLB hang on Ironlake GPU")

Fixes ba00196ca41c ("iommu/vt-d: Decouple igfx_off from graphic identity mapping")

Link https://bugs.archlinux.org/task/65362

Link https://bbs.archlinux.org/viewtopic.php?id=230323

Reported-by Wenhao Sun <[email protected]>

Closes https://bugzilla.kernel.org/show_bug.cgi?id=197029

Signed-off-by Mingcong Bai <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Lu Baolu <[email protected]>

Signed-off-by Joerg Roedel <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/iommu/intel/iommu.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

drivers/iommu/intel/iommu.c +3 -1

@@ -4666,6 +4666,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e40, quirk_iommu_igfx);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e90, quirk_iommu_igfx);
 
+/* QM57/QS57 integrated gfx malfunctions with dmar */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0044, quirk_iommu_igfx);
+
 /* Broadwell igfx malfunctions with dmar */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1606, quirk_iommu_igfx);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x160B, quirk_iommu_igfx);

@@ -4743,7 +4746,6 @@ static void quirk_calpella_no_shadow_gtt
 	}
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0040, quirk_calpella_no_shadow_gtt);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0044, quirk_calpella_no_shadow_gtt);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0062, quirk_calpella_no_shadow_gtt);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x006a, quirk_calpella_no_shadow_gtt);

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #41 lore raw

PATCH 41/164 iommu: Fix two issues in iommu_copy_struct_from_user()

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nicolin Chen <[email protected]>

commit 30a3f2f3e4bd6335b727c83c08a982d969752bc1 upstream.

In the review for iommu_copy_struct_to_user() helper, Matt pointed out that a NULL pointer should be rejected prior to dereferencing it:
https://lore.kernel.org/all/[email protected]

And Alok pointed out a typo at the same time:
https://lore.kernel.org/all/[email protected]

Since both issues were copied from iommu_copy_struct_from_user(), fix them first in the current header.

Fixes e9d36c07bb78 ("iommu: Add iommu_copy_struct_from_user helper")

Signed-off-by Nicolin Chen <[email protected]>

Reviewed-by Kevin Tian <[email protected]>

Acked-by Alok Tiwari <[email protected]>

Reviewed-by Matthew R. Ochs <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Joerg Roedel <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 include/linux/iommu.h |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

include/linux/iommu.h +4 -4

@@ -423,10 +423,10 @@ static inline int __iommu_copy_struct_fr
 	void *dst_data, const struct iommu_user_data *src_data,
 	unsigned int data_type, size_t data_len, size_t min_len)
 {
-	if (src_data->type != data_type)
-		return -EINVAL;
 	if (WARN_ON(!dst_data || !src_data))
 		return -EINVAL;
+	if (src_data->type != data_type)
+		return -EINVAL;
 	if (src_data->len < min_len || data_len < src_data->len)
 		return -EINVAL;
 	return copy_struct_from_user(dst_data, data_len, src_data->uptr,

@@ -439,8 +439,8 @@ static inline int __iommu_copy_struct_fr
  *        include/uapi/linux/iommufd.h
  * @user_data: Pointer to a struct iommu_user_data for user space data info
  * @data_type: The data type of the @kdst. Must match with @user_data->type
- * @min_last: The last memember of the data structure @kdst points in the
- *            initial version.
+ * @min_last: The last member of the data structure @kdst points in the initial
+ *            version.
  * Return 0 for success, otherwise -error.
  */
 #define iommu_copy_struct_from_user(kdst, user_data, data_type, min_last) \

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #42 lore raw

PATCH 42/164 platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mario Limonciello <[email protected]>

commit 9f5595d5f03fd4dc640607a71e89a1daa68fd19d upstream.

When an APU exits HW sleep with no active wake sources the Linux kernel will rapidly assert that the APU can enter back into HW sleep. This happens in a few ms. Contrasting this to Windows, Windows can take 10s of seconds to enter back into the resiliency phase for Modern Standby.

For some situations this can be problematic because it can cause leakage from VDDCR_SOC to VDD_MISC and force VDD_MISC outside of the electrical design guide specifications. On some designs this will trip the over voltage protection feature (OVP) of the voltage regulator module, but it could cause APU damage as well.

To prevent this risk, add an explicit sleep call so that future attempts to enter into HW sleep will have enough time to settle. This will occur while the screen is dark and only on cases that the APU should enter HW sleep again, so it shouldn't be noticeable to any user.

Signed-off-by Mario Limonciello <[email protected]>

Acked-by Shyam Sundar S K <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Reviewed-by Ilpo Järvinen <[email protected]>

Signed-off-by Ilpo Järvinen <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/platform/x86/amd/pmc/pmc.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

drivers/platform/x86/amd/pmc/pmc.c +3 -4

@@ -892,10 +892,9 @@ static void amd_pmc_s2idle_check(void)
 	struct smu_metrics table;
 	int rc;
 
-	/* CZN: Ensure that future s0i3 entry attempts at least 10ms passed */
-	if (pdev->cpu_id == AMD_CPU_ID_CZN && !get_metrics_table(pdev, &table) &&
-	    table.s0i3_last_entry_status)
-		usleep_range(10000, 20000);
+	/* Avoid triggering OVP */
+	if (!get_metrics_table(pdev, &table) && table.s0i3_last_entry_status)
+		msleep(2500);
 
 	/* Dump the IdleMask before we add to the STB */
 	amd_pmc_idlemask_read(pdev, pdev->dev, NULL);

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #43 lore raw

PATCH 43/164 platform/x86/intel-uncore-freq: Fix missing uncore sysfs during CPU hotplug

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shouye Liu <[email protected]>

commit 8d6955ed76e8a47115f2ea1d9c263ee6f505d737 upstream.

In certain situations, the sysfs for uncore may not be present when all CPUs in a package are offlined and then brought back online after boot.

This issue can occur if there is an error in adding the sysfs entry due to a memory allocation failure. Retrying to bring the CPUs online will not resolve the issue, as the uncore_cpu_mask is already set for the package before the failure condition occurs.

This issue does not occur if the failure happens during module initialization, as the module will fail to load in the event of any error.

To address this, ensure that the uncore_cpu_mask is not set until the successful return of uncore_freq_add_entry().

Fixes dbce412a7733 ("platform/x86/intel-uncore-freq: Split common and enumeration part")

Signed-off-by Shouye Liu <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Reviewed-by Ilpo Järvinen <[email protected]>

Signed-off-by Ilpo Järvinen <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/platform/x86/intel/uncore-frequency/uncore-frequency.c |   13 ++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

drivers/platform/x86/intel/uncore-frequency/uncore-frequency.c +9 -4

@@ -146,15 +146,13 @@ static int uncore_event_cpu_online(unsig
 {
 	struct uncore_data *data;
 	int target;
+	int ret;
 
 	/* Check if there is an online cpu in the package for uncore MSR */
 	target = cpumask_any_and(&uncore_cpu_mask, topology_die_cpumask(cpu));
 	if (target < nr_cpu_ids)
 		return 0;
 
-	/* Use this CPU on this die as a control CPU */
-	cpumask_set_cpu(cpu, &uncore_cpu_mask);
-
 	data = uncore_get_instance(cpu);
 	if (!data)
 		return 0;

@@ -163,7 +161,14 @@ static int uncore_event_cpu_online(unsig
 	data->die_id = topology_die_id(cpu);
 	data->domain_id = UNCORE_DOMAIN_ID_INVALID;
 
-	return uncore_freq_add_entry(data, cpu);
+	ret = uncore_freq_add_entry(data, cpu);
+	if (ret)
+		return ret;
+
+	/* Use this CPU on this die as a control CPU */
+	cpumask_set_cpu(cpu, &uncore_cpu_mask);
+
+	return 0;
 }
 
 static int uncore_event_cpu_offline(unsigned int cpu)

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #44 lore raw

PATCH 44/164 ksmbd: fix use-after-free in ksmbd_session_rpc_open

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <[email protected]>

commit a1f46c99d9ea411f9bf30025b912d881d36fc709 upstream.

A UAF issue can occur due to a race condition between ksmbd_session_rpc_open() and __session_rpc_close(). Add rpc_lock to the session to protect it.

Reported-by Norbert Szetei <[email protected]>

Tested-by Norbert Szetei <[email protected]>

Signed-off-by Namjae Jeon <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/smb/server/mgmt/user_session.c |   20 ++++++++++++++------
 fs/smb/server/mgmt/user_session.h |    1 +
 2 files changed, 15 insertions(+), 6 deletions(-)

fs/smb/server/mgmt/user_session.c +14 -6

@@ -59,10 +59,12 @@ static void ksmbd_session_rpc_clear_list
 	struct ksmbd_session_rpc *entry;
 	long index;
 
+	down_write(&sess->rpc_lock);
 	xa_for_each(&sess->rpc_handle_list, index, entry) {
 		xa_erase(&sess->rpc_handle_list, index);
 		__session_rpc_close(sess, entry);
 	}
+	up_write(&sess->rpc_lock);
 
 	xa_destroy(&sess->rpc_handle_list);
 }

@@ -92,7 +94,7 @@ int ksmbd_session_rpc_open(struct ksmbd_
 {
 	struct ksmbd_session_rpc *entry, *old;
 	struct ksmbd_rpc_command *resp;
-	int method;
+	int method, id;
 
 	method = __rpc_method(rpc_name);
 	if (!method)

@@ -102,26 +104,29 @@ int ksmbd_session_rpc_open(struct ksmbd_
 	if (!entry)
 		return -ENOMEM;
 
+	down_read(&sess->rpc_lock);
 	entry->method = method;
-	entry->id = ksmbd_ipc_id_alloc();
-	if (entry->id < 0)
+	entry->id = id = ksmbd_ipc_id_alloc();
+	if (id < 0)
 		goto free_entry;
-	old = xa_store(&sess->rpc_handle_list, entry->id, entry, KSMBD_DEFAULT_GFP);
+	old = xa_store(&sess->rpc_handle_list, id, entry, KSMBD_DEFAULT_GFP);
 	if (xa_is_err(old))
 		goto free_id;
 
-	resp = ksmbd_rpc_open(sess, entry->id);
+	resp = ksmbd_rpc_open(sess, id);
 	if (!resp)
 		goto erase_xa;
 
+	up_read(&sess->rpc_lock);
 	kvfree(resp);
-	return entry->id;
+	return id;
 erase_xa:
 	xa_erase(&sess->rpc_handle_list, entry->id);
 free_id:
 	ksmbd_rpc_id_free(entry->id);
 free_entry:
 	kfree(entry);
+	up_read(&sess->rpc_lock);
 	return -EINVAL;
 }

@@ -129,9 +134,11 @@ void ksmbd_session_rpc_close(struct ksmb
 {
 	struct ksmbd_session_rpc *entry;
 
+	down_write(&sess->rpc_lock);
 	entry = xa_erase(&sess->rpc_handle_list, id);
 	if (entry)
 		__session_rpc_close(sess, entry);
+	up_write(&sess->rpc_lock);
 }
 
 int ksmbd_session_rpc_method(struct ksmbd_session *sess, int id)

@@ -439,6 +446,7 @@ static struct ksmbd_session *__session_c
 	sess->sequence_number = 1;
 	rwlock_init(&sess->tree_conns_lock);
 	atomic_set(&sess->refcnt, 2);
+	init_rwsem(&sess->rpc_lock);
 
 	ret = __init_smb2_session(sess);
 	if (ret)

fs/smb/server/mgmt/user_session.h +1 -0

@@ -63,6 +63,7 @@ struct ksmbd_session {
 	rwlock_t			tree_conns_lock;
 
 	atomic_t			refcnt;
+	struct rw_semaphore		rpc_lock;
 };
 
 static inline int test_session_flag(struct ksmbd_session *sess, int bit)

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #45 lore raw

PATCH 45/164 ksmbd: fix use-after-free in kerberos authentication

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sean Heelan <[email protected]>

commit e86e9134e1d1c90a960dd57f59ce574d27b9a124 upstream.

Setting sess->user = NULL was introduced to fix the dangling pointer created by ksmbd_free_user. However, it is possible another thread could be operating on the session and make use of sess->user after it has been passed to ksmbd_free_user but before sess->user is set to NULL.

Signed-off-by Sean Heelan <[email protected]>

Acked-by Namjae Jeon <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/smb/server/auth.c    |   14 +++++++++++++-
 fs/smb/server/smb2pdu.c |    5 -----
 2 files changed, 13 insertions(+), 6 deletions(-)

fs/smb/server/auth.c +13 -1

@@ -550,7 +550,19 @@ int ksmbd_krb5_authenticate(struct ksmbd
 		retval = -ENOMEM;
 		goto out;
 	}
-	sess->user = user;
+
+	if (!sess->user) {
+		/* First successful authentication */
+		sess->user = user;
+	} else {
+		if (!ksmbd_compare_user(sess->user, user)) {
+			ksmbd_debug(AUTH, "different user tried to reuse session\n");
+			retval = -EPERM;
+			ksmbd_free_user(user);
+			goto out;
+		}
+		ksmbd_free_user(user);
+	}
 
 	memcpy(sess->sess_key, resp->payload, resp->session_key_len);
 	memcpy(out_blob, resp->payload + resp->session_key_len,

fs/smb/server/smb2pdu.c +0 -5

@@ -1600,11 +1600,6 @@ static int krb5_authenticate(struct ksmb
 	if (prev_sess_id && prev_sess_id != sess->id)
 		destroy_previous_session(conn, sess->user, prev_sess_id);
 
-	if (sess->state == SMB2_SESSION_VALID) {
-		ksmbd_free_user(sess->user);
-		sess->user = NULL;
-	}
-
 	retval = ksmbd_krb5_authenticate(sess, in_blob, in_len,
 					 out_blob, &out_len);
 	if (retval) {

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #46 lore raw

PATCH 46/164 ksmbd: fix use-after-free in session logoff

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sean Heelan <[email protected]>

commit 2fc9feff45d92a92cd5f96487655d5be23fb7e2b upstream.

The sess->user object can currently be in use by another thread, for example if another connection has sent a session setup request to bind to the session being free'd. The handler for that connection could be in the smb2_sess_setup function which makes use of sess->user.

Signed-off-by Sean Heelan <[email protected]>

Acked-by Namjae Jeon <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/smb/server/smb2pdu.c |    4 ----
 1 file changed, 4 deletions(-)

fs/smb/server/smb2pdu.c +0 -4

@@ -2240,10 +2240,6 @@ int smb2_session_logoff(struct ksmbd_wor
 	sess->state = SMB2_SESSION_EXPIRED;
 	up_write(&conn->session_lock);
 
-	if (sess->user) {
-		ksmbd_free_user(sess->user);
-		sess->user = NULL;
-	}
 	ksmbd_all_conn_set_status(sess_id, KSMBD_SESS_NEED_SETUP);
 
 	rsp->StructureSize = cpu_to_le16(4);

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #47 lore raw

PATCH 47/164 smb: client: fix zero length for mkdir POSIX create context

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jethro Donaldson <[email protected]>

commit 74c72419ec8da5cbc9c49410d3c44bb954538bdd upstream.

SMB create requests issued via smb311_posix_mkdir() have an incorrect length of zero bytes for the POSIX create context data. ksmbd server rejects such requests and logs "cli req too short" causing mkdir to fail with "invalid argument" on the client side. It also causes subsequent rmmod to crash in cifs_destroy_request_bufs()

Inspection of packets sent by cifs.ko using wireshark show valid data for the SMB2_POSIX_CREATE_CONTEXT is appended with the correct offset, but with an incorrect length of zero bytes. Fails with ksmbd+cifs.ko only as Windows server/client does not use POSIX extensions.

Fix smb311_posix_mkdir() to set req->CreateContextsLength as part of appending the POSIX creation context to the request.

Signed-off-by Jethro Donaldson <[email protected]>

Acked-by Paulo Alcantara (Red Hat) <[email protected]>

Reviewed-by Namjae Jeon <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/smb/client/smb2pdu.c |    1 +
 1 file changed, 1 insertion(+)

fs/smb/client/smb2pdu.c +1 -0

@@ -2938,6 +2938,7 @@ replay_again:
 		req->CreateContextsOffset = cpu_to_le32(
 			sizeof(struct smb2_create_req) +
 			iov[1].iov_len);
+		le32_add_cpu(&req->CreateContextsLength, iov[n_iov-1].iov_len);
 		pc_buf = iov[n_iov-1].iov_base;
 	}

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #48 lore raw

PATCH 48/164 cpufreq: Avoid using inconsistent policy->min and policy->max

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rafael J. Wysocki <[email protected]>

commit 7491cdf46b5cbdf123fc84fbe0a07e9e3d7b7620 upstream.

Since cpufreq_driver_resolve_freq() can run in parallel with cpufreq_set_policy() and there is no synchronization between them, the former may access policy->min and policy->max while the latter is updating them and it may see intermediate values of them due to the way the update is carried out. Also the compiler is free to apply any optimizations it wants both to the stores in cpufreq_set_policy() and to the loads in cpufreq_driver_resolve_freq() which may result in additional inconsistencies.

To address this, use WRITE_ONCE() when updating policy->min and policy->max in cpufreq_set_policy() and use READ_ONCE() for reading them in cpufreq_driver_resolve_freq(). Moreover, rearrange the update in cpufreq_set_policy() to avoid storing intermediate values in policy->min and policy->max with the help of the observation that their new values are expected to be properly ordered upfront.

Also modify cpufreq_driver_resolve_freq() to take the possible reverse ordering of policy->min and policy->max, which may happen depending on the ordering of operations when this function and cpufreq_set_policy() run concurrently, into account by always honoring the max when it turns out to be less than the min (in case it comes from thermal throttling or similar).

Fixes 151717690694 ("cpufreq: Make policy min/max hard requirements")

Cc 5.16+ <[email protected]> # 5.16+

Signed-off-by Rafael J. Wysocki <[email protected]>

Reviewed-by Christian Loehle <[email protected]>

Acked-by Viresh Kumar <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/cpufreq/cpufreq.c |   32 +++++++++++++++++++++++++-------
 1 file changed, 25 insertions(+), 7 deletions(-)

drivers/cpufreq/cpufreq.c +25 -7

@@ -538,8 +538,6 @@ static unsigned int __resolve_freq(struc
 {
 	unsigned int idx;
 
-	target_freq = clamp_val(target_freq, policy->min, policy->max);
-
 	if (!policy->freq_table)
 		return target_freq;

@@ -563,7 +561,22 @@ static unsigned int __resolve_freq(struc
 unsigned int cpufreq_driver_resolve_freq(struct cpufreq_policy *policy,
 					 unsigned int target_freq)
 {
-	return __resolve_freq(policy, target_freq, CPUFREQ_RELATION_LE);
+	unsigned int min = READ_ONCE(policy->min);
+	unsigned int max = READ_ONCE(policy->max);
+
+	/*
+	 * If this function runs in parallel with cpufreq_set_policy(), it may
+	 * read policy->min before the update and policy->max after the update
+	 * or the other way around, so there is no ordering guarantee.
+	 *
+	 * Resolve this by always honoring the max (in case it comes from
+	 * thermal throttling or similar).
+	 */
+	if (unlikely(min > max))
+		min = max;
+
+	return __resolve_freq(policy, clamp_val(target_freq, min, max),
+			      CPUFREQ_RELATION_LE);
 }
 EXPORT_SYMBOL_GPL(cpufreq_driver_resolve_freq);

@@ -2323,6 +2336,7 @@ int __cpufreq_driver_target(struct cpufr
 	if (cpufreq_disabled())
 		return -ENODEV;
 
+	target_freq = clamp_val(target_freq, policy->min, policy->max);
 	target_freq = __resolve_freq(policy, target_freq, relation);
 
 	pr_debug("target for CPU %u: %u kHz, relation %u, requested %u kHz\n",

@@ -2647,11 +2661,15 @@ static int cpufreq_set_policy(struct cpu
 	 * Resolve policy min/max to available frequencies. It ensures
 	 * no frequency resolution will neither overshoot the requested maximum
 	 * nor undershoot the requested minimum.
+	 *
+	 * Avoid storing intermediate values in policy->max or policy->min and
+	 * compiler optimizations around them because they may be accessed
+	 * concurrently by cpufreq_driver_resolve_freq() during the update.
 	 */
-	policy->min = new_data.min;
-	policy->max = new_data.max;
-	policy->min = __resolve_freq(policy, policy->min, CPUFREQ_RELATION_L);
-	policy->max = __resolve_freq(policy, policy->max, CPUFREQ_RELATION_H);
+	WRITE_ONCE(policy->max, __resolve_freq(policy, new_data.max, CPUFREQ_RELATION_H));
+	new_data.min = __resolve_freq(policy, new_data.min, CPUFREQ_RELATION_L);
+	WRITE_ONCE(policy->min, new_data.min > policy->max ? policy->max : new_data.min);
+
 	trace_cpu_frequency_limits(policy);
 
 	cpufreq_update_pressure(policy);

Greg Kroah-Hartman

author maintainer

2025-05-07 19:00 UTC #49 lore raw

PATCH 49/164 cpufreq: Fix setting policy limits when frequency tables are used

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rafael J. Wysocki <[email protected]>

commit b79028039f440e7d2c4df6ab243060c4e3803e84 upstream.

Commit 7491cdf46b5c ("cpufreq: Avoid using inconsistent policy->min and policy->max") overlooked the fact that policy->min and policy->max were accessed directly in cpufreq_frequency_table_target() and in the functions called by it. Consequently, the changes made by that commit led to problems with setting policy limits.

Address this by passing the target frequency limits to __resolve_freq() and cpufreq_frequency_table_target() and propagating them to the functions called by the latter.

Fixes 7491cdf46b5c ("cpufreq: Avoid using inconsistent policy->min and policy->max")

Cc 5.16+ <[email protected]> # 5.16+

Closes https://lore.kernel.org/linux-pm/[email protected]/ open here

Reported-by Stephan Gerhold <[email protected]>

Signed-off-by Rafael J. Wysocki <[email protected]>

Tested-by Stephan Gerhold <[email protected]>

Reviewed-by Lifeng Zheng <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/cpufreq/cpufreq.c          |   22 ++++++---
 drivers/cpufreq/cpufreq_ondemand.c |    3 -
 drivers/cpufreq/freq_table.c       |    6 +-
 include/linux/cpufreq.h            |   83 ++++++++++++++++++++++++-------------
 4 files changed, 73 insertions(+), 41 deletions(-)

drivers/cpufreq/cpufreq.c +14 -8

@@ -534,14 +534,18 @@ void cpufreq_disable_fast_switch(struct
 EXPORT_SYMBOL_GPL(cpufreq_disable_fast_switch);
 
 static unsigned int __resolve_freq(struct cpufreq_policy *policy,
-		unsigned int target_freq, unsigned int relation)
+				   unsigned int target_freq,
+				   unsigned int min, unsigned int max,
+				   unsigned int relation)
 {
 	unsigned int idx;
 
+	target_freq = clamp_val(target_freq, min, max);
+
 	if (!policy->freq_table)
 		return target_freq;
 
-	idx = cpufreq_frequency_table_target(policy, target_freq, relation);
+	idx = cpufreq_frequency_table_target(policy, target_freq, min, max, relation);
 	policy->cached_resolved_idx = idx;
 	policy->cached_target_freq = target_freq;
 	return policy->freq_table[idx].frequency;

@@ -575,8 +579,7 @@ unsigned int cpufreq_driver_resolve_freq
 	if (unlikely(min > max))
 		min = max;
 
-	return __resolve_freq(policy, clamp_val(target_freq, min, max),
-			      CPUFREQ_RELATION_LE);
+	return __resolve_freq(policy, target_freq, min, max, CPUFREQ_RELATION_LE);
 }
 EXPORT_SYMBOL_GPL(cpufreq_driver_resolve_freq);

@@ -2336,8 +2339,8 @@ int __cpufreq_driver_target(struct cpufr
 	if (cpufreq_disabled())
 		return -ENODEV;
 
-	target_freq = clamp_val(target_freq, policy->min, policy->max);
-	target_freq = __resolve_freq(policy, target_freq, relation);
+	target_freq = __resolve_freq(policy, target_freq, policy->min,
+				     policy->max, relation);
 
 	pr_debug("target for CPU %u: %u kHz, relation %u, requested %u kHz\n",
 		 policy->cpu, target_freq, relation, old_target_freq);

@@ -2666,8 +2669,11 @@ static int cpufreq_set_policy(struct cpu
 	 * compiler optimizations around them because they may be accessed
 	 * concurrently by cpufreq_driver_resolve_freq() during the update.
 	 */
-	WRITE_ONCE(policy->max, __resolve_freq(policy, new_data.max, CPUFREQ_RELATION_H));
-	new_data.min = __resolve_freq(policy, new_data.min, CPUFREQ_RELATION_L);
+	WRITE_ONCE(policy->max, __resolve_freq(policy, new_data.max,
+					       new_data.min, new_data.max,
+					       CPUFREQ_RELATION_H));
+	new_data.min = __resolve_freq(policy, new_data.min, new_data.min,
+				      new_data.max, CPUFREQ_RELATION_L);
 	WRITE_ONCE(policy->min, new_data.min > policy->max ? policy->max : new_data.min);
 
 	trace_cpu_frequency_limits(policy);

drivers/cpufreq/cpufreq_ondemand.c +2 -1

@@ -76,7 +76,8 @@ static unsigned int generic_powersave_bi
 		return freq_next;
 	}
 
-	index = cpufreq_frequency_table_target(policy, freq_next, relation);
+	index = cpufreq_frequency_table_target(policy, freq_next, policy->min,
+					       policy->max, relation);
 	freq_req = freq_table[index].frequency;
 	freq_reduc = freq_req * od_tuners->powersave_bias / 1000;
 	freq_avg = freq_req - freq_reduc;

drivers/cpufreq/freq_table.c +3 -3

@@ -116,8 +116,8 @@ int cpufreq_generic_frequency_table_veri
 EXPORT_SYMBOL_GPL(cpufreq_generic_frequency_table_verify);
 
 int cpufreq_table_index_unsorted(struct cpufreq_policy *policy,
-				 unsigned int target_freq,
-				 unsigned int relation)
+				 unsigned int target_freq, unsigned int min,
+				 unsigned int max, unsigned int relation)
 {
 	struct cpufreq_frequency_table optimal = {
 		.driver_data = ~0,

@@ -148,7 +148,7 @@ int cpufreq_table_index_unsorted(struct
 	cpufreq_for_each_valid_entry_idx(pos, table, i) {
 		freq = pos->frequency;
 
-		if ((freq < policy->min) || (freq > policy->max))
+		if (freq < min || freq > max)
 			continue;
 		if (freq == target_freq) {
 			optimal.driver_data = i;

include/linux/cpufreq.h +54 ~~-29~~

157 lines not on this page · raw message

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #50 lore raw

PATCH 50/164 tracing: Fix oob write in trace_seq_to_buffer()

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jeongjun Park <[email protected]>

commit f5178c41bb43444a6008150fe6094497135d07cb upstream.

syzbot reported this bug:
==================================================================

BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260

CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
 print_address_description mm/kasan/report.c:408 [inline]
 print_report+0xc3/0x670 mm/kasan/report.c:521
 kasan_report+0xe0/0x110 mm/kasan/report.c:634
 check_region_inline mm/kasan/generic.c:183 [inline]
 kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
 __asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
 trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
 tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
 ....
==================================================================

It has been reported that trace_seq_to_buffer() tries to copy more data than PAGE_SIZE to buf. Therefore, to prevent this, we should use the smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument.

Link https://lore.kernel.org/[email protected] open here

Reported-by [email protected]

Fixes 3c56819b14b0 ("tracing: splice support for tracing_pipe")

Signed-off-by Jeongjun Park <[email protected]>

Signed-off-by Steven Rostedt (Google) <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 kernel/trace/trace.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

kernel/trace/trace.c +3 -2

@@ -6703,13 +6703,14 @@ static ssize_t tracing_splice_read_pipe(
 		/* Copy the data into the page, so we can start over. */
 		ret = trace_seq_to_buffer(&iter->seq,
 					  page_address(spd.pages[i]),
-					  trace_seq_used(&iter->seq));
+					  min((size_t)trace_seq_used(&iter->seq),
+						  PAGE_SIZE));
 		if (ret < 0) {
 			__free_page(spd.pages[i]);
 			break;
 		}
 		spd.partial[i].offset = 0;
-		spd.partial[i].len = trace_seq_used(&iter->seq);
+		spd.partial[i].len = ret;
 
 		trace_seq_init(&iter->seq);
 	}

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #51 lore raw

PATCH 51/164 drm/amd/display: Default IPS to RCG_IN_ACTIVE_IPS2_IN_OFF

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Leo Li <[email protected]>

commit 6ed0dc3fd39558f48119daf8f99f835deb7d68da upstream.

[Why]

Recent findings show negligible power savings between IPS2 and RCG during static desktop. In fact, DCN related clocks are higher when IPS2 is enabled vs RCG.

RCG_IN_ACTIVE is also the default policy for another OS supported by DC, and it has faster entry/exit.

[How]

Remove previous logic that checked for IPS2 support, and just default to DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF.

Fixes 199888aa25b3 ("drm/amd/display: Update IPS default mode for DCN35/DCN351")

Reviewed-by Aurabindo Pillai <[email protected]>

Signed-off-by Leo Li <[email protected]>

Signed-off-by Zaeem Mohamed <[email protected]>

Tested-by Mark Broadworth <[email protected]>

Signed-off-by Alex Deucher <[email protected]>

(cherry picked from commit 8f772d79ef39b463ead00ef6f009bebada3a9d49)

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |   20 --------------------
 1 file changed, 20 deletions(-)

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +0 ~~-20~~

@@ -1887,26 +1887,6 @@ static enum dmub_ips_disable_type dm_get
 
 	switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) {
 	case IP_VERSION(3, 5, 0):
-		/*
-		 * On DCN35 systems with Z8 enabled, it's possible for IPS2 + Z8 to
-		 * cause a hard hang. A fix exists for newer PMFW.
-		 *
-		 * As a workaround, for non-fixed PMFW, force IPS1+RCG as the deepest
-		 * IPS state in all cases, except for s0ix and all displays off (DPMS),
-		 * where IPS2 is allowed.
-		 *
-		 * When checking pmfw version, use the major and minor only.
-		 */
-		if ((adev->pm.fw_version & 0x00FFFF00) < 0x005D6300)
-			ret = DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF;
-		else if (amdgpu_ip_version(adev, GC_HWIP, 0) > IP_VERSION(11, 5, 0))
-			/*
-			 * Other ASICs with DCN35 that have residency issues with
-			 * IPS2 in idle.
-			 * We want them to use IPS2 only in display off cases.
-			 */
-			ret =  DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF;
-		break;
 	case IP_VERSION(3, 5, 1):
 		ret =  DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF;
 		break;

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #52 lore raw

PATCH 52/164 ASoC: soc-core: Stop using of_property_read_bool() for non-boolean properties

Link https://patch.msgid.link/db10e96fbda121e7456d70e97a013cbfc9755f4d.1737533954.git.geert+renesas@glider.be open here

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <[email protected]>

commit 6eab7034579917f207ca6d8e3f4e11e85e0ab7d5 upstream.

On R-Car:

OF: /sound: Read of boolean property 'simple-audio-card,bitclock-master' with a value.
OF: /sound: Read of boolean property 'simple-audio-card,frame-master' with a value.

or:

OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'bitclock-master' with a value.
OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value.

The use of of_property_read_bool() for non-boolean properties is deprecated in favor of of_property_present() when testing for property presence.

Replace testing for presence before calling of_property_read_u32() by testing for an -EINVAL return value from the latter, to simplify the code.

Signed-off-by Geert Uytterhoeven <[email protected]>

Signed-off-by Mark Brown <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 sound/soc/soc-core.c |   32 +++++++++++++-------------------
 1 file changed, 13 insertions(+), 19 deletions(-)

sound/soc/soc-core.c +13 ~~-19~~

@@ -3057,7 +3057,7 @@ int snd_soc_of_parse_pin_switches(struct
 	unsigned int i, nb_controls;
 	int ret;
 
-	if (!of_property_read_bool(dev->of_node, prop))
+	if (!of_property_present(dev->of_node, prop))
 		return 0;
 
 	strings = devm_kcalloc(dev, nb_controls_max,

@@ -3131,23 +3131,17 @@ int snd_soc_of_parse_tdm_slot(struct dev
 	if (rx_mask)
 		snd_soc_of_get_slot_mask(np, "dai-tdm-slot-rx-mask", rx_mask);
 
-	if (of_property_read_bool(np, "dai-tdm-slot-num")) {
-		ret = of_property_read_u32(np, "dai-tdm-slot-num", &val);
-		if (ret)
-			return ret;
-
-		if (slots)
-			*slots = val;
-	}
-
-	if (of_property_read_bool(np, "dai-tdm-slot-width")) {
-		ret = of_property_read_u32(np, "dai-tdm-slot-width", &val);
-		if (ret)
-			return ret;
+	ret = of_property_read_u32(np, "dai-tdm-slot-num", &val);
+	if (ret && ret != -EINVAL)
+		return ret;
+	if (!ret && slots)
+		*slots = val;
 
-		if (slot_width)
-			*slot_width = val;
-	}
+	ret = of_property_read_u32(np, "dai-tdm-slot-width", &val);
+	if (ret && ret != -EINVAL)
+		return ret;
+	if (!ret && slot_width)
+		*slot_width = val;
 
 	return 0;
 }

@@ -3411,12 +3405,12 @@ unsigned int snd_soc_daifmt_parse_clock_
 	 * check "[prefix]frame-master"
 	 */
 	snprintf(prop, sizeof(prop), "%sbitclock-master", prefix);
-	bit = of_property_read_bool(np, prop);
+	bit = of_property_present(np, prop);
 	if (bit && bitclkmaster)
 		*bitclkmaster = of_parse_phandle(np, prop, 0);
 
 	snprintf(prop, sizeof(prop), "%sframe-master", prefix);
-	frame = of_property_read_bool(np, prop);
+	frame = of_property_present(np, prop);
 	if (frame && framemaster)
 		*framemaster = of_parse_phandle(np, prop, 0);

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #53 lore raw

PATCH 53/164 ASoC: cs-amp-lib-test: Dont select SND_SOC_CS_AMP_LIB

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Richard Fitzgerald <[email protected]>

[ Upstream commit 96014d91cffb335d3b396771524ff2aba3549865 ]

Depend on SND_SOC_CS_AMP_LIB instead of selecting it.

KUNIT_ALL_TESTS should only build tests for components that are already being built, it should not cause other stuff to be added to the build.

Fixes 177862317a98 ("ASoC: cs-amp-lib: Add KUnit test for calibration helpers")

Signed-off-by Richard Fitzgerald <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Reviewed-by David Gow <[email protected]>

Signed-off-by Mark Brown <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 sound/soc/codecs/Kconfig | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

sound/soc/codecs/Kconfig +2 -3

index 0d9d1d250f2b5..6a72561c4189b 100644
@@ -746,10 +746,9 @@ config SND_SOC_CS_AMP_LIB
 	tristate
 
 config SND_SOC_CS_AMP_LIB_TEST
-	tristate "KUnit test for Cirrus Logic cs-amp-lib"
-	depends on KUNIT
+	tristate "KUnit test for Cirrus Logic cs-amp-lib" if !KUNIT_ALL_TESTS
+	depends on SND_SOC_CS_AMP_LIB && KUNIT
 	default KUNIT_ALL_TESTS
-	select SND_SOC_CS_AMP_LIB
 	help
 	  This builds KUnit tests for the Cirrus Logic common
 	  amplifier library.

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #54 lore raw

PATCH 54/164 ASoC: soc-pcm: Fix hw_params() and DAPM widget sequence

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sheetal <[email protected]>

[ Upstream commit 9aff2e8df240e84a36f2607f98a0a9924a24e65d ]

Issue:
When multiple audio streams share a common BE DAI, the BE DAI widget can be powered up before its hardware parameters are configured. This incorrect sequence leads to intermittent pcm_write errors.

For example, the below Tegra use-case throws an error:
aplay(2 streams) -> AMX(mux) -> ADX(demux) -> arecord(2 streams), here, 'AMX TX' and 'ADX RX' are common BE DAIs.

For above usecase when failure happens below sequence is observed:
aplay(1) FE open()
- BE DAI callbacks added to the list
- BE DAI state = SND_SOC_DPCM_STATE_OPEN
aplay(2) FE open()
- BE DAI callbacks are not added to the list as the state is already SND_SOC_DPCM_STATE_OPEN during aplay(1) FE open().
aplay(2) FE hw_params()
- BE DAI hw_params() callback ignored
aplay(2) FE prepare()
- Widget is powered ON without BE DAI hw_params() call
aplay(1) FE hw_params()
- BE DAI hw_params() is now called

Fix:
Add BE DAIs in the list if its state is either SND_SOC_DPCM_STATE_OPEN or SND_SOC_DPCM_STATE_HW_PARAMS as well.

It ensures the widget is powered ON after BE DAI hw_params() callback.

Fixes 0c25db3f7621 ("ASoC: soc-pcm: Don't reconnect an already active BE")

Signed-off-by Sheetal <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Mark Brown <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 sound/soc/soc-pcm.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

sound/soc/soc-pcm.c +4 -1

index 1102599403c53..0e21ff9f7b74e 100644
@@ -1633,10 +1633,13 @@ static int dpcm_add_paths(struct snd_soc_pcm_runtime *fe, int stream,
 		/*
 		 * Filter for systems with 'component_chaining' enabled.
 		 * This helps to avoid unnecessary re-configuration of an
-		 * already active BE on such systems.
+		 * already active BE on such systems and ensures the BE DAI
+		 * widget is powered ON after hw_params() BE DAI callback.
 		 */
 		if (fe->card->component_chaining &&
 		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_NEW) &&
+		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_OPEN) &&
+		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_HW_PARAMS) &&
 		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_CLOSE))
 			continue;

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #55 lore raw

PATCH 55/164 book3s64/radix : Align section vmemmap start address to PAGE_SIZE

Link https://patch.msgid.link/8f98ec2b442977c618f7256cec88eb17dde3f2b9.1741609795.git.donettom@linux.ibm.com open here

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Donet Tom <[email protected]>

[ Upstream commit 9cf7e13fecbab0894f6986fc6986ab2eba8de52e ]

A vmemmap altmap is a device-provided region used to provide backing storage for struct pages. For each namespace, the altmap should belong to that same namespace. If the namespaces are created unaligned, there is a chance that the section vmemmap start address could also be unaligned. If the section vmemmap start address is unaligned, the altmap page allocated from the current namespace might be used by the previous namespace also. During the free operation, since the altmap is shared between two namespaces, the previous namespace may detect that the page does not belong to its altmap and incorrectly assume that the page is a normal page. It then attempts to free the normal page, which leads to a kernel crash.

Kernel attempted to read user page (18) - exploit attempt? (uid: 0)

BUG: Kernel NULL pointer dereference on read at 0x00000018
Faulting instruction address: 0xc000000000530c7c
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
CPU: 32 PID: 2104 Comm: ndctl Kdump: loaded Tainted: G        W
NIP:  c000000000530c7c LR: c000000000530e00 CTR: 0000000000007ffe
REGS: c000000015e57040 TRAP: 0300   Tainted: G        W
MSR:  800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE>  CR: 84482404
CFAR: c000000000530dfc DAR: 0000000000000018 DSISR: 40000000 IRQMASK: 0

GPR00: c000000000530e00 c000000015e572e0 c000000002c5cb00 c00c000101008040
GPR04: 0000000000000000 0000000000000007 0000000000000001 000000000000001f
GPR08: 0000000000000005 0000000000000000 0000000000000018 0000000000002000
GPR12: c0000000001d2fb0 c0000060de6b0080 0000000000000000 c0000060dbf90020
GPR16: c00c000101008000 0000000000000001 0000000000000000 c000000125b20f00
GPR20: 0000000000000001 0000000000000000 ffffffffffffffff c00c000101007fff
GPR24: 0000000000000001 0000000000000000 0000000000000000 0000000000000000
GPR28: 0000000004040201 0000000000000001 0000000000000000 c00c000101008040 NIP [c000000000530c7c] get_pfnblock_flags_mask+0x7c/0xd0
LR [c000000000530e00] free_unref_page_prepare+0x130/0x4f0

Call Trace:
free_unref_page+0x50/0x1e0
free_reserved_page+0x40/0x68
free_vmemmap_pages+0x98/0xe0
remove_pte_table+0x164/0x1e8
remove_pmd_table+0x204/0x2c8
remove_pud_table+0x1c4/0x288
remove_pagetable+0x1c8/0x310
vmemmap_free+0x24/0x50
section_deactivate+0x28c/0x2a0
__remove_pages+0x84/0x110
arch_remove_memory+0x38/0x60
memunmap_pages+0x18c/0x3d0
devm_action_release+0x30/0x50
release_nodes+0x68/0x140
devres_release_group+0x100/0x190
dax_pmem_compat_release+0x44/0x80 [dax_pmem_compat]
device_for_each_child+0x8c/0x100
[dax_pmem_compat_remove+0x2c/0x50 [dax_pmem_compat]
nvdimm_bus_remove+0x78/0x140 [libnvdimm]
device_remove+0x70/0xd0

Another issue is that if there is no altmap, a PMD-sized vmemmap page will be allocated from RAM, regardless of the alignment of the section start address. If the section start address is not aligned to the PMD size, a VM_BUG_ON will be triggered when setting the PMD-sized page to page table.

In this patch, we are aligning the section vmemmap start address to PAGE_SIZE. After alignment, the start address will not be part of the current namespace, and a normal page will be allocated for the vmemmap mapping of the current section. For the remaining sections, altmaps will be allocated. During the free operation, the normal page will be correctly freed.

In the same way, a PMD_SIZE vmemmap page will be allocated only if the section start address is PMD_SIZE-aligned; otherwise, it will fall back to a PAGE-sized vmemmap allocation.

Without this patch
==================
NS1 start NS2 start
_________________________________________________________
| NS1 | NS2 |
---------------------------------------------------------

| Altmap| Altmap | .....|Altmap| Altmap | ...........
|  NS1  |  NS1   |      | NS2  |  NS2   |

In the above scenario, NS1 and NS2 are two namespaces. The vmemmap for NS1 comes from Altmap NS1, which belongs to NS1, and the vmemmap for NS2 comes from Altmap NS2, which belongs to NS2.

The vmemmap start for NS2 is not aligned, so Altmap NS2 is shared by both NS1 and NS2. During the free operation in NS1, Altmap NS2 is not part of NS1's altmap, causing it to attempt to free an invalid page.

With this patch
===============
NS1 start NS2 start
_________________________________________________________
| NS1 | NS2 |
---------------------------------------------------------

| Altmap| Altmap | .....| Normal | Altmap | Altmap |.......
|  NS1  |  NS1   |      |  Page  |  NS2   |  NS2   |

If the vmemmap start for NS2 is not aligned then we are allocating a normal page. NS1 and NS2 vmemmap will be freed correctly.

Fixes 368a0590d954 ("powerpc/book3s64/vmemmap: switch radix to use a different vmemmap handling function")

Co-developed-by Ritesh Harjani (IBM) <[email protected]>

Signed-off-by Ritesh Harjani (IBM) <[email protected]>

Signed-off-by Donet Tom <[email protected]>

Signed-off-by Madhavan Srinivasan <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/mm/book3s64/radix_pgtable.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

arch/powerpc/mm/book3s64/radix_pgtable.c +15 -2

index b0d927009af83..04189689c127e 100644
@@ -1132,6 +1132,19 @@ int __meminit radix__vmemmap_populate(unsigned long start, unsigned long end, in
 	pmd_t *pmd;
 	pte_t *pte;
 
+	/*
+	 * Make sure we align the start vmemmap addr so that we calculate
+	 * the correct start_pfn in altmap boundary check to decided whether
+	 * we should use altmap or RAM based backing memory allocation. Also
+	 * the address need to be aligned for set_pte operation.
+
+	 * If the start addr is already PMD_SIZE aligned we will try to use
+	 * a pmd mapping. We don't want to be too aggressive here beacause
+	 * that will cause more allocations in RAM. So only if the namespace
+	 * vmemmap start addr is PMD_SIZE aligned we will use PMD mapping.
+	 */
+
+	start = ALIGN_DOWN(start, PAGE_SIZE);
 	for (addr = start; addr < end; addr = next) {
 		next = pmd_addr_end(addr, end);

@@ -1157,8 +1170,8 @@ int __meminit radix__vmemmap_populate(unsigned long start, unsigned long end, in
 			 * in altmap block allocation failures, in which case
 			 * we fallback to RAM for vmemmap allocation.
 			 */
-			if (altmap && (!IS_ALIGNED(addr, PMD_SIZE) ||
-				       altmap_cross_boundary(altmap, addr, PMD_SIZE))) {
+			if (!IS_ALIGNED(addr, PMD_SIZE) || (altmap &&
+			    altmap_cross_boundary(altmap, addr, PMD_SIZE))) {
 				/*
 				 * make sure we don't create altmap mappings
 				 * covering things outside the device.

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #56 lore raw

PATCH 56/164 pinctrl: imx: Return NULL if no group is matched and found

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hui Wang <[email protected]>

[ Upstream commit e64c0ff0d5d85791fbcd126ee558100a06a24a97 ]

Currently if no group is matched and found, this function will return the last grp to the caller, this is not expected, it is supposed to return NULL in this case.

Fixes e566fc11ea76 ("pinctrl: imx: use generic pinctrl helpers for managing groups")

Signed-off-by Hui Wang <[email protected]>

Reviewed-by Frank Li <[email protected]>

Link https://lore.kernel.org/[email protected] open here

Signed-off-by Linus Walleij <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/pinctrl/freescale/pinctrl-imx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

drivers/pinctrl/freescale/pinctrl-imx.c +3 -3

index d05c2c478e795..4e1fe457a608a 100644
@@ -37,16 +37,16 @@ static inline const struct group_desc *imx_pinctrl_find_group_by_name(
 				struct pinctrl_dev *pctldev,
 				const char *name)
 {
-	const struct group_desc *grp = NULL;
+	const struct group_desc *grp;
 	int i;
 
 	for (i = 0; i < pctldev->num_groups; i++) {
 		grp = pinctrl_generic_get_group(pctldev, i);
 		if (grp && !strcmp(grp->grp.name, name))
-			break;
+			return grp;
 	}
 
-	return grp;
+	return NULL;
 }
 
 static void imx_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #57 lore raw

PATCH 57/164 powerpc/boot: Check for ld-option support

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Madhavan Srinivasan <[email protected]>

[ Upstream commit b2accfe7ca5bc9f9af28e603b79bdd5ad8df5c0b ]

Commit 579aee9fc594 ("powerpc: suppress some linker warnings in recent linker versions") enabled support to add linker option "--no-warn-rwx-segments",
if the version is greater than 2.39. Similar build warning were
reported recently from linker version 2.35.2.

ld: warning: arch/powerpc/boot/zImage.epapr has a LOAD segment with RWX permissions
ld: warning: arch/powerpc/boot/zImage.pseries has a LOAD segment with RWX permissions

Fix the warning by checking for "--no-warn-rwx-segments" option support in linker to enable it, instead of checking for the version range.

Fixes 579aee9fc594 ("powerpc: suppress some linker warnings in recent linker versions")

Reported-by Venkat Rao Bagalkote <[email protected]>

Tested-by Venkat Rao Bagalkote <[email protected]>

Closes https://lore.kernel.org/linuxppc-dev/[email protected]/ open here

Signed-off-by Madhavan Srinivasan <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/boot/wrapper | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

arch/powerpc/boot/wrapper +2 -4

index b1f5549a3c9c4..08f7a1386e8e0 100755
@@ -234,10 +234,8 @@ fi
 
 # suppress some warnings in recent ld versions
 nowarn="-z noexecstack"
-if ! ld_is_lld; then
-	if [ "$LD_VERSION" -ge "$(echo 2.39 | ld_version)" ]; then
-		nowarn="$nowarn --no-warn-rwx-segments"
-	fi
+if [ $(${CROSS}ld -v --no-warn-rwx-segments &>/dev/null; echo $?) -eq 0 ]; then
+	nowarn="$nowarn --no-warn-rwx-segments"
 fi
 
 platformo=$object/"$platform".o

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #58 lore raw

PATCH 58/164 ASoC: Intel: sof_sdw: Add NULL check in asoc_sdw_rt_dmic_rtd_init()

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chenyuan Yang <[email protected]>

[ Upstream commit 68715cb5c0e00284d93f976c6368809f64131b0b ]

mic_name returned by devm_kasprintf() could be NULL. Add a check for it.

Signed-off-by Chenyuan Yang <[email protected]>

Fixes bee2fe44679f ("ASoC: Intel: sof_sdw: use generic rtd_init function for Realtek SDW DMICs")

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Mark Brown <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 sound/soc/sdw_utils/soc_sdw_rt_dmic.c | 2 ++
 1 file changed, 2 insertions(+)

sound/soc/sdw_utils/soc_sdw_rt_dmic.c +2 -0

index 7f24806d809d9..74bca3d04e4f1 100644
@@ -29,6 +29,8 @@ int asoc_sdw_rt_dmic_rtd_init(struct snd_soc_pcm_runtime *rtd, struct snd_soc_da
 		mic_name = devm_kasprintf(card->dev, GFP_KERNEL, "rt715-sdca");
 	else
 		mic_name = devm_kasprintf(card->dev, GFP_KERNEL, "%s", component->name_prefix);
+	if (!mic_name)
+		return -ENOMEM;
 
 	card->components = devm_kasprintf(card->dev, GFP_KERNEL,
 					  "%s mic:%s", card->components,

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #59 lore raw

PATCH 59/164 ALSA: hda/realtek - Enable speaker for HP platform

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kailang Yang <[email protected]>

[ Upstream commit 494d0939b1bda4d4ddca7d52a6ce6f808ff2c9a5 ]

The speaker doesn't mute when plugged headphone. This platform support 4ch speakers.
The speaker pin 0x14 wasn't fill verb table. After assigned model ALC245_FIXUP_HP_SPECTRE_X360_EU0XXX. The speaker can mute when headphone was plugged.

Fixes aa8e3ef4fe53 ("ALSA: hda/realtek: Add quirks for various HP ENVY models")

Signed-off-by Kailang Yang <[email protected]>

Link https://lore.kernel.org/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 sound/pci/hda/patch_realtek.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

sound/pci/hda/patch_realtek.c +6 -6

index 4171aa22747c3..5a36cb2969b08 100644
@@ -440,6 +440,10 @@ static void alc_fill_eapd_coef(struct hda_codec *codec)
 		alc_update_coef_idx(codec, 0x67, 0xf000, 0x3000);
 		fallthrough;
 	case 0x10ec0215:
+	case 0x10ec0236:
+	case 0x10ec0245:
+	case 0x10ec0256:
+	case 0x10ec0257:
 	case 0x10ec0285:
 	case 0x10ec0289:
 		alc_update_coef_idx(codec, 0x36, 1<<13, 0);

@@ -447,12 +451,8 @@ static void alc_fill_eapd_coef(struct hda_codec *codec)
 	case 0x10ec0230:
 	case 0x10ec0233:
 	case 0x10ec0235:
-	case 0x10ec0236:
-	case 0x10ec0245:
 	case 0x10ec0255:
-	case 0x10ec0256:
 	case 0x19e58326:
-	case 0x10ec0257:
 	case 0x10ec0282:
 	case 0x10ec0283:
 	case 0x10ec0286:

@@ -10687,8 +10687,8 @@ static const struct hda_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x8ca7, "HP ZBook Fury", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8caf, "HP Elite mt645 G8 Mobile Thin Client", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
 	SND_PCI_QUIRK(0x103c, 0x8cbd, "HP Pavilion Aero Laptop 13-bg0xxx", ALC245_FIXUP_HP_X360_MUTE_LEDS),
-	SND_PCI_QUIRK(0x103c, 0x8cdd, "HP Spectre", ALC287_FIXUP_CS35L41_I2C_2),
-	SND_PCI_QUIRK(0x103c, 0x8cde, "HP Spectre", ALC287_FIXUP_CS35L41_I2C_2),
+	SND_PCI_QUIRK(0x103c, 0x8cdd, "HP Spectre", ALC245_FIXUP_HP_SPECTRE_X360_EU0XXX),
+	SND_PCI_QUIRK(0x103c, 0x8cde, "HP OmniBook Ultra Flip Laptop 14t", ALC245_FIXUP_HP_SPECTRE_X360_EU0XXX),
 	SND_PCI_QUIRK(0x103c, 0x8cdf, "HP SnowWhite", ALC287_FIXUP_CS35L41_I2C_2_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8ce0, "HP SnowWhite", ALC287_FIXUP_CS35L41_I2C_2_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8cf5, "HP ZBook Studio 16", ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED),

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #60 lore raw

PATCH 60/164 drm/i915/pxp: fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chen Linxuan <[email protected]>

[ Upstream commit 7e21ea8149a0e41c3666ee52cc063a6f797a7a2a ]

On x86_64 with gcc version 13.3.0, I compile kernel with:

make defconfig
./scripts/kconfig/merge_config.sh .config <(
echo CONFIG_COMPILE_TEST=y
)
make KCFLAGS="-fno-inline-functions -fno-inline-small-functions -fno-inline-functions-called-once"

Then I get a linker error:

ld: vmlinux.o: in function `pxp_fw_dependencies_completed':
kintel_pxp.c:(.text+0x95728f): undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'

This is caused by not having a intel_pxp_gsccs_is_ready_for_sessions() header stub for CONFIG_DRM_I915_PXP=n. Add it.

Signed-off-by Chen Linxuan <[email protected]>

Fixes 99afb7cc8c44 ("drm/i915/pxp: Add ARB session creation and cleanup")

Reviewed-by Jani Nikula <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Jani Nikula <[email protected]>

(cherry picked from commit b484c1e225a6a582fc78c4d7af7b286408bb7d41)

Signed-off-by Jani Nikula <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.h | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.h +6 -2

index 9aae779c4da31..4969d3de2bac3 100644
@@ -23,6 +23,7 @@ int intel_pxp_gsccs_init(struct intel_pxp *pxp);
 
 int intel_pxp_gsccs_create_session(struct intel_pxp *pxp, int arb_session_id);
 void intel_pxp_gsccs_end_arb_fw_session(struct intel_pxp *pxp, u32 arb_session_id);
+bool intel_pxp_gsccs_is_ready_for_sessions(struct intel_pxp *pxp);
 
 #else
 static inline void intel_pxp_gsccs_fini(struct intel_pxp *pxp)

@@ -34,8 +35,11 @@ static inline int intel_pxp_gsccs_init(struct intel_pxp *pxp)
 	return 0;
 }
 
-#endif
+static inline bool intel_pxp_gsccs_is_ready_for_sessions(struct intel_pxp *pxp)
+{
+	return false;
+}
 
-bool intel_pxp_gsccs_is_ready_for_sessions(struct intel_pxp *pxp);
+#endif
 
 #endif /*__INTEL_PXP_GSCCS_H__ */

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #61 lore raw

PATCH 61/164 wifi: iwlwifi: dont warn if the NIC is gone in resume

Link https://patch.msgid.link/20250420095642.d8d58146c829.I569ca15eaaa774d633038a749cc6ec7448419714@changeid open here

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <[email protected]>

[ Upstream commit 15220a257319ffe3bf95796326dfe0aacdbeb1c4 ]

Some BIOSes decide to power gate the WLAN device during S3. Since iwlwifi doesn't expect this, it gets very noisy reporting that the device is no longer available. Wifi is still available because iwlwifi recovers, but it spews scary prints in the log.

Fix that by failing gracefully.

Fixes e8bb19c1d590 ("wifi: iwlwifi: support fast resume")

Closes https://bugzilla.kernel.org/show_bug.cgi?id=219597

Signed-off-by Emmanuel Grumbach <[email protected]>

Signed-off-by Miri Korenblit <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 .../net/wireless/intel/iwlwifi/iwl-trans.c    |  1 -
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 20 ++++++++++++++++---
 .../wireless/intel/iwlwifi/pcie/internal.h    |  9 +++++----
 .../net/wireless/intel/iwlwifi/pcie/trans.c   | 13 +++++++++---
 drivers/net/wireless/intel/iwlwifi/pcie/tx.c  |  2 +-
 5 files changed, 33 insertions(+), 12 deletions(-)

drivers/net/wireless/intel/iwlwifi/iwl-trans.c +0 -1

index 3c9d91496c826..3b3dcaf33c9d9 100644
@@ -347,7 +347,6 @@ void __releases(nic_access)
 iwl_trans_release_nic_access(struct iwl_trans *trans)
 {
 	iwl_trans_pcie_release_nic_access(trans);
-	__release(nic_access);
 }
 IWL_EXPORT_SYMBOL(iwl_trans_release_nic_access);

drivers/net/wireless/intel/iwlwifi/pcie/drv.c +17 -3

index 9dd0e0a51ce5c..a3cabee35d471 100644
@@ -1652,10 +1652,24 @@ static int _iwl_pci_resume(struct device *device, bool restore)
 	 * need to reset it completely.
 	 * Note: MAC (bits 0:7) will be cleared upon suspend even with wowlan,
 	 * so assume that any bits there mean that the device is usable.
+	 * For older devices, just try silently to grab the NIC.
 	 */
-	if (trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_BZ &&
-	    !iwl_read32(trans, CSR_FUNC_SCRATCH))
-		device_was_powered_off = true;
+	if (trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_BZ) {
+		if (!iwl_read32(trans, CSR_FUNC_SCRATCH))
+			device_was_powered_off = true;
+	} else {
+		/*
+		 * bh are re-enabled by iwl_trans_pcie_release_nic_access,
+		 * so re-enable them if _iwl_trans_pcie_grab_nic_access fails.
+		 */
+		local_bh_disable();
+		if (_iwl_trans_pcie_grab_nic_access(trans, true)) {
+			iwl_trans_pcie_release_nic_access(trans);
+		} else {
+			device_was_powered_off = true;
+			local_bh_enable();
+		}
+	}
 
 	if (restore || device_was_powered_off) {
 		trans->state = IWL_TRANS_NO_FW;

drivers/net/wireless/intel/iwlwifi/pcie/internal.h +5 -4

index ebe9b25cc53a9..6019114a5d1aa 100644
@@ -558,10 +558,10 @@ void iwl_trans_pcie_free(struct iwl_trans *trans);
 void iwl_trans_pcie_free_pnvm_dram_regions(struct iwl_dram_regions *dram_regions,
 					   struct device *dev);
 
-bool __iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans);
-#define _iwl_trans_pcie_grab_nic_access(trans)			\
+bool __iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans, bool silent);
+#define _iwl_trans_pcie_grab_nic_access(trans, silent)		\
 	__cond_lock(nic_access_nobh,				\
-		    likely(__iwl_trans_pcie_grab_nic_access(trans)))
+		    likely(__iwl_trans_pcie_grab_nic_access(trans, silent)))
 
 /*****************************************************
 * RX

@@ -1102,7 +1102,8 @@ void iwl_trans_pcie_set_bits_mask(struct iwl_trans *trans, u32 reg,
 int iwl_trans_pcie_read_config32(struct iwl_trans *trans, u32 ofs,
 				 u32 *val);
 bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans);
-void iwl_trans_pcie_release_nic_access(struct iwl_trans *trans);
+void __releases(nic_access_nobh)
+iwl_trans_pcie_release_nic_access(struct iwl_trans *trans);
 
 /* transport gen 1 exported functions */
 void iwl_trans_pcie_fw_alive(struct iwl_trans *trans, u32 scd_addr);

drivers/net/wireless/intel/iwlwifi/pcie/trans.c +10 -3

index d19b3bd0866bd..18d7d59ae5814 100644
@@ -2191,7 +2191,7 @@ EXPORT_SYMBOL(iwl_trans_pcie_remove);
  * This version doesn't disable BHs but rather assumes they're
  * already disabled.
  */
-bool __iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans)
+bool __iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans, bool silent)
 {
 	int ret;
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);

@@ -2243,6 +2243,11 @@ bool __iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans)
 	if (unlikely(ret < 0)) {
 		u32 cntrl = iwl_read32(trans, CSR_GP_CNTRL);
 
+		if (silent) {
+			spin_unlock(&trans_pcie->reg_lock);
+			return false;
+		}
+
 		WARN_ONCE(1,
 			  "Timeout waiting for hardware access (CSR_GP_CNTRL 0x%08x)\n",
 			  cntrl);

@@ -2273,7 +2278,7 @@ bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans)
 	bool ret;
 
 	local_bh_disable();
-	ret = __iwl_trans_pcie_grab_nic_access(trans);
+	ret = __iwl_trans_pcie_grab_nic_access(trans, false);
 	if (ret) {
 		/* keep BHs disabled until iwl_trans_pcie_release_nic_access */
 		return ret;

@@ -2282,7 +2287,8 @@ bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans)
 	return false;
 }
 
-void iwl_trans_pcie_release_nic_access(struct iwl_trans *trans)
+void __releases(nic_access_nobh)
+iwl_trans_pcie_release_nic_access(struct iwl_trans *trans)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);

@@ -2309,6 +2315,7 @@ void iwl_trans_pcie_release_nic_access(struct iwl_trans *trans)
 	 * scheduled on different CPUs (after we drop reg_lock).
 	 */
 out:
+	__release(nic_access_nobh);
 	spin_unlock_bh(&trans_pcie->reg_lock);
 }

drivers/net/wireless/intel/iwlwifi/pcie/tx.c +1 -1

index 9fcdd06e126ae..f0213a6b8cf53 100644
@@ -1021,7 +1021,7 @@ static int iwl_pcie_set_cmd_in_flight(struct iwl_trans *trans,
 	 * returned. This needs to be done only on NICs that have
 	 * apmg_wake_up_wa set (see above.)
 	 */
-	if (!_iwl_trans_pcie_grab_nic_access(trans))
+	if (!_iwl_trans_pcie_grab_nic_access(trans, false))
 		return -EIO;
 
 	/*

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #62 lore raw

PATCH 62/164 wifi: iwlwifi: fix the check for the SCRATCH register upon resume

Link https://patch.msgid.link/20250420095642.a7e082ee785c.I9418d76f860f54261cfa89e1f7ac10300904ba40@changeid open here

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <[email protected]>

[ Upstream commit a17821321a9b42f26e77335cd525fee72dc1cd63 ]

We can't rely on the SCRATCH register being 0 on platform that power gate the NIC in S3. Even in those platforms, the SCRATCH register is still returning 0x1010000.

Make sure that we understand that those platforms have powered off the device.

Closes https://bugzilla.kernel.org/show_bug.cgi?id=219597

Fixes cb347bd29d0d ("wifi: iwlwifi: mvm: fix hibernation")

Signed-off-by Emmanuel Grumbach <[email protected]>

Signed-off-by Miri Korenblit <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/intel/iwlwifi/iwl-csr.h  | 1 +
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 6 ++++--
 2 files changed, 5 insertions(+), 2 deletions(-)

drivers/net/wireless/intel/iwlwifi/iwl-csr.h +1 -0

index 98563757ce2c9..405bba199fe7f 100644
@@ -148,6 +148,7 @@
  * during a error FW error.
  */
 #define CSR_FUNC_SCRATCH_INIT_VALUE		(0x01010101)
+#define CSR_FUNC_SCRATCH_POWER_OFF_MASK		0xFFFF
 
 /* Bits for CSR_HW_IF_CONFIG_REG */
 #define CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP_DASH	(0x0000000F)

drivers/net/wireless/intel/iwlwifi/pcie/drv.c +4 -2

index a3cabee35d471..9141ea57abfce 100644
@@ -1651,11 +1651,13 @@ static int _iwl_pci_resume(struct device *device, bool restore)
 	 * Scratch value was altered, this means the device was powered off, we
 	 * need to reset it completely.
 	 * Note: MAC (bits 0:7) will be cleared upon suspend even with wowlan,
-	 * so assume that any bits there mean that the device is usable.
+	 * but not bits [15:8]. So if we have bits set in lower word, assume
+	 * the device is alive.
 	 * For older devices, just try silently to grab the NIC.
 	 */
 	if (trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_BZ) {
-		if (!iwl_read32(trans, CSR_FUNC_SCRATCH))
+		if (!(iwl_read32(trans, CSR_FUNC_SCRATCH) &
+		      CSR_FUNC_SCRATCH_POWER_OFF_MASK))
 			device_was_powered_off = true;
 	} else {
 		/*

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #63 lore raw

PATCH 63/164 wifi: plfxlc: Remove erroneous assert in plfxlc_mac_release

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Murad Masimov <[email protected]>

[ Upstream commit 0fb15ae3b0a9221be01715dac0335647c79f3362 ]

plfxlc_mac_release() asserts that mac->lock is held. This assertion is incorrect, because even if it was possible, it would not be the valid behaviour. The function is used when probe fails or after the device is disconnected. In both cases mac->lock can not be held as the driver is not working with the device at the moment. All functions that use mac->lock unlock it just after it was held. There is also no need to hold mac->lock for plfxlc_mac_release() itself, as mac data is not affected, except for mac->flags, which is modified atomically.

This bug leads to the following warning:
================================================================

WARNING: CPU: 0 PID: 127 at drivers/net/wireless/purelifi/plfxlc/mac.c:106 plfxlc_mac_release+0x7d/0xa0
Modules linked in:
CPU: 0 PID: 127 Comm: kworker/0:2 Not tainted 6.1.124-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: usb_hub_wq hub_event
RIP: 0010:plfxlc_mac_release+0x7d/0xa0 drivers/net/wireless/purelifi/plfxlc/mac.c:106
Call Trace:
 <TASK>
 probe+0x941/0xbd0 drivers/net/wireless/purelifi/plfxlc/usb.c:694
 usb_probe_interface+0x5c0/0xaf0 drivers/usb/core/driver.c:396
 really_probe+0x2ab/0xcb0 drivers/base/dd.c:639
 __driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785
 driver_probe_device+0x50/0x420 drivers/base/dd.c:815
 __device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943
 bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429
 __device_attach+0x359/0x570 drivers/base/dd.c:1015
 bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489
 device_add+0xb48/0xfd0 drivers/base/core.c:3696
 usb_set_configuration+0x19dd/0x2020 drivers/usb/core/message.c:2165
 usb_generic_driver_probe+0x84/0x140 drivers/usb/core/generic.c:238
 usb_probe_device+0x130/0x260 drivers/usb/core/driver.c:293
 really_probe+0x2ab/0xcb0 drivers/base/dd.c:639
 __driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785
 driver_probe_device+0x50/0x420 drivers/base/dd.c:815
 __device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943
 bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429
 __device_attach+0x359/0x570 drivers/base/dd.c:1015
 bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489
 device_add+0xb48/0xfd0 drivers/base/core.c:3696
 usb_new_device+0xbdd/0x18f0 drivers/usb/core/hub.c:2620
 hub_port_connect drivers/usb/core/hub.c:5477 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5617 [inline]
 port_event drivers/usb/core/hub.c:5773 [inline]
 hub_event+0x2efe/0x5730 drivers/usb/core/hub.c:5855
 process_one_work+0x8a9/0x11d0 kernel/workqueue.c:2292
 worker_thread+0xa47/0x1200 kernel/workqueue.c:2439
 kthread+0x28d/0x320 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
 </TASK>
================================================================

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes 68d57a07bfe5 ("wireless: add plfxlc driver for pureLiFi X, XL, XC devices")

Reported-by [email protected]

Closes https://syzkaller.appspot.com/bug?extid=7d4f142f6c288de8abfe

Signed-off-by Murad Masimov <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/purelifi/plfxlc/mac.c | 1 -
 1 file changed, 1 deletion(-)

drivers/net/wireless/purelifi/plfxlc/mac.c +0 -1

index eae93efa61504..82d1bf7edba20 100644
@@ -102,7 +102,6 @@ int plfxlc_mac_init_hw(struct ieee80211_hw *hw)
 void plfxlc_mac_release(struct plfxlc_mac *mac)
 {
 	plfxlc_chip_release(&mac->chip);
-	lockdep_assert_held(&mac->lock);
 }
 
 int plfxlc_op_start(struct ieee80211_hw *hw)

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #64 lore raw

PATCH 64/164 powerpc/boot: Fix dash warning

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Madhavan Srinivasan <[email protected]>

[ Upstream commit e3f506b78d921e48a00d005bea5c45ec36a99240 ]

'commit b2accfe7ca5b ("powerpc/boot: Check for ld-option support")' suppressed linker warnings, but the expressed used did not go well with POSIX shell (dash) resulting with this warning

arch/powerpc/boot/wrapper: 237: [: 0: unexpected operator
ld: warning: arch/powerpc/boot/zImage.epapr has a LOAD segment with RWX permissions

Fix the check to handle the reported warning. Patch also fixes couple of shellcheck reported errors for the same line.

In arch/powerpc/boot/wrapper line 237:
if [ $(${CROSS}ld -v --no-warn-rwx-segments &>/dev/null; echo $?) -eq 0 ]; then
^-- SC2046 (warning): Quote this to prevent word splitting.
^------^ SC2086 (info): Double quote to prevent globbing and word splitting.
^---------^ SC3020 (warning): In POSIX sh, &> is undefined.

Fixes b2accfe7ca5b ("powerpc/boot: Check for ld-option support")

Reported-by Stephen Rothwell <[email protected]>

Tested-by Venkat Rao Bagalkote <[email protected]>

Reviewed-by Stephen Rothwell <[email protected]>

Signed-off-by Madhavan Srinivasan <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/boot/wrapper | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

arch/powerpc/boot/wrapper +1 -1

index 08f7a1386e8e0..fd6db10ef9e65 100755
@@ -234,7 +234,7 @@ fi
 
 # suppress some warnings in recent ld versions
 nowarn="-z noexecstack"
-if [ $(${CROSS}ld -v --no-warn-rwx-segments &>/dev/null; echo $?) -eq 0 ]; then
+if "${CROSS}ld" -v --no-warn-rwx-segments >/dev/null 2>&1; then
 	nowarn="$nowarn --no-warn-rwx-segments"
 fi

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #65 lore raw

PATCH 65/164 vxlan: vnifilter: Fix unlocked deletion of default FDB entry

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ido Schimmel <[email protected]>

[ Upstream commit 087a9eb9e5978e3ba362e1163691e41097e8ca20 ]

When a VNI is deleted from a VXLAN device in 'vnifilter' mode, the FDB entry associated with the default remote (assuming one was configured) is deleted without holding the hash lock. This is wrong and will result in a warning [1] being generated by the lockdep annotation that was added by commit ebe642067455 ("vxlan: Create wrappers for FDB lookup").

Reproducer:

 # ip link add vx0 up type vxlan dstport 4789 external vnifilter local 192.0.2.1
 # bridge vni add vni 10010 remote 198.51.100.1 dev vx0
 # bridge vni del vni 10010 dev vx0

Fix by acquiring the hash lock before the deletion and releasing it afterwards. Blame the original commit that introduced the issue rather than the one that exposed it.

[1]

WARNING: CPU: 3 PID: 392 at drivers/net/vxlan/vxlan_core.c:417 vxlan_find_mac+0x17f/0x1a0
[...]
RIP: 0010:vxlan_find_mac+0x17f/0x1a0
[...]
Call Trace:
 <TASK>
 __vxlan_fdb_delete+0xbe/0x560
 vxlan_vni_delete_group+0x2ba/0x940
 vxlan_vni_del.isra.0+0x15f/0x580
 vxlan_process_vni_filter+0x38b/0x7b0
 vxlan_vnifilter_process+0x3bb/0x510
 rtnetlink_rcv_msg+0x2f7/0xb70
 netlink_rcv_skb+0x131/0x360
 netlink_unicast+0x426/0x710
 netlink_sendmsg+0x75a/0xc20
 __sock_sendmsg+0xc1/0x150
 ____sys_sendmsg+0x5aa/0x7b0
 ___sys_sendmsg+0xfc/0x180
 __sys_sendmsg+0x121/0x1b0
 do_syscall_64+0xbb/0x1d0
 entry_SYSCALL_64_after_hwframe+0x4b/0x53

Fixes f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device")

Signed-off-by Ido Schimmel <[email protected]>

Reviewed-by Nikolay Aleksandrov <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/vxlan/vxlan_vnifilter.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

drivers/net/vxlan/vxlan_vnifilter.c +7 -1

index 6e6e9f05509ab..06d19e90eadb5 100644
@@ -627,7 +627,11 @@ static void vxlan_vni_delete_group(struct vxlan_dev *vxlan,
 	 * default dst remote_ip previously added for this vni
 	 */
 	if (!vxlan_addr_any(&vninode->remote_ip) ||
-	    !vxlan_addr_any(&dst->remote_ip))
+	    !vxlan_addr_any(&dst->remote_ip)) {
+		u32 hash_index = fdb_head_index(vxlan, all_zeros_mac,
+						vninode->vni);
+
+		spin_lock_bh(&vxlan->hash_lock[hash_index]);
 		__vxlan_fdb_delete(vxlan, all_zeros_mac,
 				   (vxlan_addr_any(&vninode->remote_ip) ?
 				   dst->remote_ip : vninode->remote_ip),

@@ -635,6 +639,8 @@ static void vxlan_vni_delete_group(struct vxlan_dev *vxlan,
 				   vninode->vni, vninode->vni,
 				   dst->remote_ifindex,
 				   true);
+		spin_unlock_bh(&vxlan->hash_lock[hash_index]);
+	}
 
 	if (vxlan->dev->flags & IFF_UP) {
 		if (vxlan_addr_multicast(&vninode->remote_ip) &&

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #66 lore raw

PATCH 66/164 xsk: Fix race condition in AF_XDP generic RX path

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: e.kubanski <[email protected]>

[ Upstream commit a1356ac7749cafc4e27aa62c0c4604b5dca4983e ]

Move rx_lock from xsk_socket to xsk_buff_pool.
Fix synchronization for shared umem mode in
generic RX path where multiple sockets share
single xsk_buff_pool.

RX queue is exclusive to xsk_socket, while FILL
queue can be shared between multiple sockets.
This could result in race condition where two
CPU cores access RX path of two different sockets
sharing the same umem.

Protect both queues by acquiring spinlock in shared xsk_buff_pool.

Lock contention may be minimized in the future by some per-thread FQ buffering.

It's safe and necessary to move spin_lock_bh(rx_lock) after xsk_rcv_check():
* xs->pool and spinlock_init is synchronized by xsk_bind() -> xsk_is_bound() memory barriers.
* xsk_rcv_check() may return true at the moment of xsk_release() or xsk_unbind_dev(), however this will not cause any data races or race conditions. xsk_unbind_dev() removes xdp socket from all maps and waits for completion of all outstanding rx operations. Packets in RX path will either complete safely or drop.

Signed-off-by Eryk Kubanski <[email protected]>

Fixes bf0bdd1343efb ("xdp: fix race on generic receive path")

Acked-by Magnus Karlsson <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 include/net/xdp_sock.h      | 3 ---
 include/net/xsk_buff_pool.h | 2 ++
 net/xdp/xsk.c               | 6 +++---
 net/xdp/xsk_buff_pool.c     | 1 +
 4 files changed, 6 insertions(+), 6 deletions(-)

include/net/xdp_sock.h +0 -3

index bfe625b55d55d..df3f5f07bc7c2 100644
@@ -71,9 +71,6 @@ struct xdp_sock {
 	 */
 	u32 tx_budget_spent;
 
-	/* Protects generic receive. */
-	spinlock_t rx_lock;
-
 	/* Statistics */
 	u64 rx_dropped;
 	u64 rx_queue_full;

include/net/xsk_buff_pool.h +2 -0

index bacb33f1e3e58..823fd5c7a3b18 100644
@@ -55,6 +55,8 @@ struct xsk_buff_pool {
 	refcount_t users;
 	struct xdp_umem *umem;
 	struct work_struct work;
+	/* Protects generic receive in shared and non-shared umem mode. */
+	spinlock_t rx_lock;
 	struct list_head free_list;
 	struct list_head xskb_list;
 	u32 heads_cnt;

net/xdp/xsk.c +3 -3

index b57d5d2904eb4..f031b07baa57a 100644
@@ -338,13 +338,14 @@ int xsk_generic_rcv(struct xdp_sock *xs, struct xdp_buff *xdp)
 	u32 len = xdp_get_buff_len(xdp);
 	int err;
 
-	spin_lock_bh(&xs->rx_lock);
 	err = xsk_rcv_check(xs, xdp, len);
 	if (!err) {
+		spin_lock_bh(&xs->pool->rx_lock);
 		err = __xsk_rcv(xs, xdp, len);
 		xsk_flush(xs);
+		spin_unlock_bh(&xs->pool->rx_lock);
 	}
-	spin_unlock_bh(&xs->rx_lock);
+
 	return err;
 }

@@ -1720,7 +1721,6 @@ static int xsk_create(struct net *net, struct socket *sock, int protocol,
 	xs = xdp_sk(sk);
 	xs->state = XSK_READY;
 	mutex_init(&xs->mutex);
-	spin_lock_init(&xs->rx_lock);
 
 	INIT_LIST_HEAD(&xs->map_list);
 	spin_lock_init(&xs->map_list_lock);

net/xdp/xsk_buff_pool.c +1 -0

index 87e865b9b83af..b69dbd8615fc4 100644
@@ -87,6 +87,7 @@ struct xsk_buff_pool *xp_create_and_assign_umem(struct xdp_sock *xs,
 	pool->addrs = umem->addrs;
 	pool->tx_metadata_len = umem->tx_metadata_len;
 	pool->tx_sw_csum = umem->flags & XDP_UMEM_TX_SW_CSUM;
+	spin_lock_init(&pool->rx_lock);
 	INIT_LIST_HEAD(&pool->free_list);
 	INIT_LIST_HEAD(&pool->xskb_list);
 	INIT_LIST_HEAD(&pool->xsk_tx_list);

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #67 lore raw

PATCH 67/164 net/mlx5e: Use custom tunnel header for vxlan gbp

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vlad Dogaru <[email protected]>

[ Upstream commit eacc77a73275895eca0e3655dc6c671853500e2e ]

Symbolic (e.g. "vxlan") and custom (e.g. "tunnel_header_0") tunnels cannot be combined, but the match params interface does not have fields for matching on vxlan gbp. To match vxlan bgp, the tc_tun layer uses tunnel_header_0.

Allow matching on both VNI and GBP by matching the VNI with a custom tunnel header instead of the symbolic field name.

Matching solely on the VNI continues to use the symbolic field name.

Fixes 74a778b4a63f ("net/mlx5: HWS, added definers handling")

Signed-off-by Vlad Dogaru <[email protected]>

Reviewed-by Yevgeny Kliteynik <[email protected]>

Signed-off-by Mark Bloch <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 .../mellanox/mlx5/core/en/tc_tun_vxlan.c      | 32 +++++++++++++++++--
 1 file changed, 29 insertions(+), 3 deletions(-)

drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c +29 -3

index e4e487c8431b8..b9cf79e271244 100644
@@ -165,9 +165,6 @@ static int mlx5e_tc_tun_parse_vxlan(struct mlx5e_priv *priv,
 	struct flow_match_enc_keyid enc_keyid;
 	void *misc_c, *misc_v;
 
-	misc_c = MLX5_ADDR_OF(fte_match_param, spec->match_criteria, misc_parameters);
-	misc_v = MLX5_ADDR_OF(fte_match_param, spec->match_value, misc_parameters);
-
 	if (!flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ENC_KEYID))
 		return 0;

@@ -182,6 +179,30 @@ static int mlx5e_tc_tun_parse_vxlan(struct mlx5e_priv *priv,
 		err = mlx5e_tc_tun_parse_vxlan_gbp_option(priv, spec, f);
 		if (err)
 			return err;
+
+		/* We can't mix custom tunnel headers with symbolic ones and we
+		 * don't have a symbolic field name for GBP, so we use custom
+		 * tunnel headers in this case. We need hardware support to
+		 * match on custom tunnel headers, but we already know it's
+		 * supported because the previous call successfully checked for
+		 * that.
+		 */
+		misc_c = MLX5_ADDR_OF(fte_match_param, spec->match_criteria,
+				      misc_parameters_5);
+		misc_v = MLX5_ADDR_OF(fte_match_param, spec->match_value,
+				      misc_parameters_5);
+
+		/* Shift by 8 to account for the reserved bits in the vxlan
+		 * header after the VNI.
+		 */
+		MLX5_SET(fte_match_set_misc5, misc_c, tunnel_header_1,
+			 be32_to_cpu(enc_keyid.mask->keyid) << 8);
+		MLX5_SET(fte_match_set_misc5, misc_v, tunnel_header_1,
+			 be32_to_cpu(enc_keyid.key->keyid) << 8);
+
+		spec->match_criteria_enable |= MLX5_MATCH_MISC_PARAMETERS_5;
+
+		return 0;
 	}
 
 	/* match on VNI is required */

@@ -195,6 +216,11 @@ static int mlx5e_tc_tun_parse_vxlan(struct mlx5e_priv *priv,
 		return -EOPNOTSUPP;
 	}
 
+	misc_c = MLX5_ADDR_OF(fte_match_param, spec->match_criteria,
+			      misc_parameters);
+	misc_v = MLX5_ADDR_OF(fte_match_param, spec->match_value,
+			      misc_parameters);
+
 	MLX5_SET(fte_match_set_misc, misc_c, vxlan_vni,
 		 be32_to_cpu(enc_keyid.mask->keyid));
 	MLX5_SET(fte_match_set_misc, misc_v, vxlan_vni,

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #68 lore raw

PATCH 68/164 net/mlx5: E-Switch, Initialize MAC Address for Default GID

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Maor Gottlieb <[email protected]>

[ Upstream commit 5d1a04f347e6cbf5ffe74da409a5d71fbe8c5f19 ]

Initialize the source MAC address when creating the default GID entry. Since this entry is used only for loopback traffic, it only needs to be a unicast address. A zeroed-out MAC address is sufficient for this purpose.
Without this fix, random bits would be assigned as the source address. If these bits formed a multicast address, the firmware would return an error, preventing the user from switching to switchdev mode:

Error: mlx5_core: Failed setting eswitch to offloads. kernel answers: Invalid argument

Fixes 80f09dfc237f ("net/mlx5: Eswitch, enable RoCE loopback traffic")

Signed-off-by Maor Gottlieb <[email protected]>

Signed-off-by Mark Bloch <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/mellanox/mlx5/core/rdma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/net/ethernet/mellanox/mlx5/core/rdma.c +1 -1

index a42f6cd99b744..f585ef5a34243 100644
@@ -118,8 +118,8 @@ static void mlx5_rdma_make_default_gid(struct mlx5_core_dev *dev, union ib_gid *
 
 static int mlx5_rdma_add_roce_addr(struct mlx5_core_dev *dev)
 {
+	u8 mac[ETH_ALEN] = {};
 	union ib_gid gid;
-	u8 mac[ETH_ALEN];
 
 	mlx5_rdma_make_default_gid(dev, &gid);
 	return mlx5_core_roce_gid_set(dev, 0,

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #69 lore raw

PATCH 69/164 net/mlx5e: TC, Continue the attr process even if encap entry is invalid

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jianbo Liu <[email protected]>

[ Upstream commit 172c034264c894518c012387f2de2f9d6443505d ]

Previously the offload of the rule with header rewrite and mirror to both internal and external destinations is skipped if the encap entry is not valid. But it shouldn't because driver will try to offload it again if neighbor is updated and encap entry is valid, to replace the old FTE added for slow path. But the extra split attr doesn't exist at that time as the process is skipped, driver then fails to offload it. To fix this issue, remove the checking and continue the attr process if encap entry is invalid.

Fixes b11bde56246e ("net/mlx5e: TC, Offload rewrite and mirror to both internal and external dests")

Signed-off-by Jianbo Liu <[email protected]>

Reviewed-by Cosmin Ratiu <[email protected]>

Signed-off-by Mark Bloch <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +1 -4

index 6b3b1afe83121..218d5402cd1a6 100644
@@ -1750,9 +1750,6 @@ extra_split_attr_dests_needed(struct mlx5e_tc_flow *flow, struct mlx5_flow_attr
 	    !list_is_first(&attr->list, &flow->attrs))
 		return 0;
 
-	if (flow_flag_test(flow, SLOW))
-		return 0;
-
 	esw_attr = attr->esw_attr;
 	if (!esw_attr->split_count ||
 	    esw_attr->split_count == esw_attr->out_count - 1)

@@ -1766,7 +1763,7 @@ extra_split_attr_dests_needed(struct mlx5e_tc_flow *flow, struct mlx5_flow_attr
 	for (i = esw_attr->split_count; i < esw_attr->out_count; i++) {
 		/* external dest with encap is considered as internal by firmware */
 		if (esw_attr->dests[i].vport == MLX5_VPORT_UPLINK &&
-		    !(esw_attr->dests[i].flags & MLX5_ESW_DEST_ENCAP_VALID))
+		    !(esw_attr->dests[i].flags & MLX5_ESW_DEST_ENCAP))
 			ext_dest = true;
 		else
 			int_dest = true;

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:01 UTC #70 lore raw

PATCH 70/164 net/mlx5e: Fix lock order in mlx5e_tx_reporter_ptpsq_unhealthy_recover

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Cosmin Ratiu <[email protected]>

[ Upstream commit 1c2940ec0ddf51c689ee9ab85ead85c11b77809d ]

RTNL needs to be acquired before state_lock.

Fixes fdce06bda7e5 ("net/mlx5e: Acquire RTNL lock before RQs/SQs activation/deactivation")

Signed-off-by Cosmin Ratiu <[email protected]>

Reviewed-by Dragos Tatulea <[email protected]>

Signed-off-by Mark Bloch <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c +2 -4

index 09433b91be176..c8adf309ecad0 100644
@@ -177,6 +177,7 @@ static int mlx5e_tx_reporter_ptpsq_unhealthy_recover(void *ctx)
 
 	priv = ptpsq->txqsq.priv;
 
+	rtnl_lock();
 	mutex_lock(&priv->state_lock);
 	chs = &priv->channels;
 	netdev = priv->netdev;

@@ -184,22 +185,19 @@ static int mlx5e_tx_reporter_ptpsq_unhealthy_recover(void *ctx)
 	carrier_ok = netif_carrier_ok(netdev);
 	netif_carrier_off(netdev);
 
-	rtnl_lock();
 	mlx5e_deactivate_priv_channels(priv);
-	rtnl_unlock();
 
 	mlx5e_ptp_close(chs->ptp);
 	err = mlx5e_ptp_open(priv, &chs->params, chs->c[0]->lag_port, &chs->ptp);
 
-	rtnl_lock();
 	mlx5e_activate_priv_channels(priv);
-	rtnl_unlock();
 
 	/* return carrier back if needed */
 	if (carrier_ok)
 		netif_carrier_on(netdev);
 
 	mutex_unlock(&priv->state_lock);
+	rtnl_unlock();
 
 	return err;
 }

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #71 lore raw

PATCH 71/164 net/mlx5: E-switch, Fix error handling for enabling roce

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Mi <[email protected]>

[ Upstream commit 90538d23278a981e344d364e923162fce752afeb ]

The cited commit assumes enabling roce always succeeds. But it is not true. Add error handling for it.

Fixes 80f09dfc237f ("net/mlx5: Eswitch, enable RoCE loopback traffic")

Signed-off-by Chris Mi <[email protected]>

Reviewed-by Roi Dayan <[email protected]>

Reviewed-by Maor Gottlieb <[email protected]>

Signed-off-by Mark Bloch <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 .../net/ethernet/mellanox/mlx5/core/eswitch_offloads.c   | 5 ++++-
 drivers/net/ethernet/mellanox/mlx5/core/rdma.c           | 9 +++++----
 drivers/net/ethernet/mellanox/mlx5/core/rdma.h           | 4 ++--
 3 files changed, 11 insertions(+), 7 deletions(-)

drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +4 -1

index 3950b1d4b3d8e..988df7047b01d 100644
@@ -3514,7 +3514,9 @@ int esw_offloads_enable(struct mlx5_eswitch *esw)
 	int err;
 
 	mutex_init(&esw->offloads.termtbl_mutex);
-	mlx5_rdma_enable_roce(esw->dev);
+	err = mlx5_rdma_enable_roce(esw->dev);
+	if (err)
+		goto err_roce;
 
 	err = mlx5_esw_host_number_init(esw);
 	if (err)

@@ -3575,6 +3577,7 @@ int esw_offloads_enable(struct mlx5_eswitch *esw)
 	esw_offloads_metadata_uninit(esw);
 err_metadata:
 	mlx5_rdma_disable_roce(esw->dev);
+err_roce:
 	mutex_destroy(&esw->offloads.termtbl_mutex);
 	return err;
 }

drivers/net/ethernet/mellanox/mlx5/core/rdma.c +5 -4

index f585ef5a34243..5c552b71e371c 100644
@@ -140,17 +140,17 @@ void mlx5_rdma_disable_roce(struct mlx5_core_dev *dev)
 	mlx5_nic_vport_disable_roce(dev);
 }
 
-void mlx5_rdma_enable_roce(struct mlx5_core_dev *dev)
+int mlx5_rdma_enable_roce(struct mlx5_core_dev *dev)
 {
 	int err;
 
 	if (!MLX5_CAP_GEN(dev, roce))
-		return;
+		return 0;
 
 	err = mlx5_nic_vport_enable_roce(dev);
 	if (err) {
 		mlx5_core_err(dev, "Failed to enable RoCE: %d\n", err);
-		return;
+		return err;
 	}
 
 	err = mlx5_rdma_add_roce_addr(dev);

@@ -165,10 +165,11 @@ void mlx5_rdma_enable_roce(struct mlx5_core_dev *dev)
 		goto del_roce_addr;
 	}
 
-	return;
+	return err;
 
 del_roce_addr:
 	mlx5_rdma_del_roce_addr(dev);
 disable_roce:
 	mlx5_nic_vport_disable_roce(dev);
+	return err;
 }

drivers/net/ethernet/mellanox/mlx5/core/rdma.h +2 -2

index 750cff2a71a4b..3d9e76c3d42fb 100644
@@ -8,12 +8,12 @@
 
 #ifdef CONFIG_MLX5_ESWITCH
 
-void mlx5_rdma_enable_roce(struct mlx5_core_dev *dev);
+int mlx5_rdma_enable_roce(struct mlx5_core_dev *dev);
 void mlx5_rdma_disable_roce(struct mlx5_core_dev *dev);
 
 #else /* CONFIG_MLX5_ESWITCH */
 
-static inline void mlx5_rdma_enable_roce(struct mlx5_core_dev *dev) {}
+static inline int mlx5_rdma_enable_roce(struct mlx5_core_dev *dev) { return 0; }
 static inline void mlx5_rdma_disable_roce(struct mlx5_core_dev *dev) {}
 
 #endif /* CONFIG_MLX5_ESWITCH */

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #72 lore raw

PATCH 72/164 accel/ivpu: Correct DCT interrupt handling

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Karol Wachowski <[email protected]>

[ Upstream commit e53e004e346062e15df9511bd4b5a19e34701384 ]

Fix improper use of dct_active_percent field in DCT interrupt handler causing DCT to never get enabled. Set dct_active_percent internally before IPC to ensure correct driver value even if IPC fails.
Set default DCT value to 30 accordingly to HW architecture specification.

Fixes a19bffb10c46 ("accel/ivpu: Implement DCT handling")

Reviewed-by Jeff Hugo <[email protected]>

Signed-off-by Jacek Lawrynowicz <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/accel/ivpu/ivpu_hw_btrs.h |  2 +-
 drivers/accel/ivpu/ivpu_pm.c      | 18 ++++++++++--------
 2 files changed, 11 insertions(+), 9 deletions(-)

drivers/accel/ivpu/ivpu_hw_btrs.h +1 -1

index 71792dab3c210..3855e2df1e0c8 100644
@@ -14,7 +14,7 @@
 #define PLL_PROFILING_FREQ_DEFAULT   38400000
 #define PLL_PROFILING_FREQ_HIGH      400000000
 
-#define DCT_DEFAULT_ACTIVE_PERCENT 15u
+#define DCT_DEFAULT_ACTIVE_PERCENT 30u
 #define DCT_PERIOD_US		   35300u
 
 int ivpu_hw_btrs_info_init(struct ivpu_device *vdev);

drivers/accel/ivpu/ivpu_pm.c +10 -8

index fbb61a2c3b19c..d1fbad78f61ba 100644
@@ -421,16 +421,17 @@ int ivpu_pm_dct_enable(struct ivpu_device *vdev, u8 active_percent)
 	active_us = (DCT_PERIOD_US * active_percent) / 100;
 	inactive_us = DCT_PERIOD_US - active_us;
 
+	vdev->pm->dct_active_percent = active_percent;
+
+	ivpu_dbg(vdev, PM, "DCT requested %u%% (D0: %uus, D0i2: %uus)\n",
+		 active_percent, active_us, inactive_us);
+
 	ret = ivpu_jsm_dct_enable(vdev, active_us, inactive_us);
 	if (ret) {
 		ivpu_err_ratelimited(vdev, "Filed to enable DCT: %d\n", ret);
 		return ret;
 	}
 
-	vdev->pm->dct_active_percent = active_percent;
-
-	ivpu_dbg(vdev, PM, "DCT set to %u%% (D0: %uus, D0i2: %uus)\n",
-		 active_percent, active_us, inactive_us);
 	return 0;
 }

@@ -438,15 +439,16 @@ int ivpu_pm_dct_disable(struct ivpu_device *vdev)
 {
 	int ret;
 
+	vdev->pm->dct_active_percent = 0;
+
+	ivpu_dbg(vdev, PM, "DCT requested to be disabled\n");
+
 	ret = ivpu_jsm_dct_disable(vdev);
 	if (ret) {
 		ivpu_err_ratelimited(vdev, "Filed to disable DCT: %d\n", ret);
 		return ret;
 	}
 
-	vdev->pm->dct_active_percent = 0;
-
-	ivpu_dbg(vdev, PM, "DCT disabled\n");
 	return 0;
 }

@@ -458,7 +460,7 @@ void ivpu_pm_dct_irq_thread_handler(struct ivpu_device *vdev)
 	if (ivpu_hw_btrs_dct_get_request(vdev, &enable))
 		return;
 
-	if (vdev->pm->dct_active_percent)
+	if (enable)
 		ret = ivpu_pm_dct_enable(vdev, DCT_DEFAULT_ACTIVE_PERCENT);
 	else
 		ret = ivpu_pm_dct_disable(vdev);

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #73 lore raw

PATCH 73/164 ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Venkata Prasad Potturu <[email protected]>

[ Upstream commit 6d9b64156d849e358cb49b6b899fb0b7d262bda8 ]

Update chip data using dev_get_drvdata(dev->parent) to fix NULL pointer deref in acp_i2s_set_tdm_slot.

Fixes cd60dec8994c ("ASoC: amd: acp: Refactor TDM slots selction based on acp revision id")

Signed-off-by Venkata Prasad Potturu <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Mark Brown <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 sound/soc/amd/acp/acp-i2s.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

sound/soc/amd/acp/acp-i2s.c +1 -1

index 92c5ff0deea2c..607a3eaeb6da8 100644
@@ -101,7 +101,7 @@ static int acp_i2s_set_tdm_slot(struct snd_soc_dai *dai, u32 tx_mask, u32 rx_mas
 	struct acp_stream *stream;
 	int slot_len, no_of_slots;
 
-	chip = dev_get_platdata(dev);
+	chip = dev_get_drvdata(dev->parent);
 	switch (slot_width) {
 	case SLOT_WIDTH_8:
 		slot_len = 8;

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #74 lore raw

PATCH 74/164 Bluetooth: hci_conn: Remove alloc from critical section

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Iulia Tanasescu <[email protected]>

[ Upstream commit 25ab2db3e60e0e84d7cdc740ea6ae3c10fe61eaa ]

This removes the kzalloc memory allocation inside critical section in create_pa_sync, fixing the following message that appears when the kernel is compiled with CONFIG_DEBUG_ATOMIC_SLEEP enabled:

BUG: sleeping function called from invalid context at

include/linux/sched/mm.h:321

Signed-off-by Iulia Tanasescu <[email protected]>

Signed-off-by Luiz Augusto von Dentz <[email protected]>

Stable-dep-of: 6d0417e4e1cf ("Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver")

Signed-off-by Sasha Levin <[email protected]>

---
 net/bluetooth/hci_conn.c | 28 ++++++++++------------------
 1 file changed, 10 insertions(+), 18 deletions(-)

net/bluetooth/hci_conn.c +10 ~~-18~~

index e6591f487a511..d097e308a7554 100644
@@ -2079,7 +2079,7 @@ static bool hci_conn_check_create_pa_sync(struct hci_conn *conn)
 
 static int create_pa_sync(struct hci_dev *hdev, void *data)
 {
-	struct hci_cp_le_pa_create_sync *cp = NULL;
+	struct hci_cp_le_pa_create_sync cp = {0};
 	struct hci_conn *conn;
 	int err = 0;

@@ -2108,19 +2108,13 @@ static int create_pa_sync(struct hci_dev *hdev, void *data)
 		if (hci_conn_check_create_pa_sync(conn)) {
 			struct bt_iso_qos *qos = &conn->iso_qos;
 
-			cp = kzalloc(sizeof(*cp), GFP_KERNEL);
-			if (!cp) {
-				err = -ENOMEM;
-				goto unlock;
-			}
-
-			cp->options = qos->bcast.options;
-			cp->sid = conn->sid;
-			cp->addr_type = conn->dst_type;
-			bacpy(&cp->addr, &conn->dst);
-			cp->skip = cpu_to_le16(qos->bcast.skip);
-			cp->sync_timeout = cpu_to_le16(qos->bcast.sync_timeout);
-			cp->sync_cte_type = qos->bcast.sync_cte_type;
+			cp.options = qos->bcast.options;
+			cp.sid = conn->sid;
+			cp.addr_type = conn->dst_type;
+			bacpy(&cp.addr, &conn->dst);
+			cp.skip = cpu_to_le16(qos->bcast.skip);
+			cp.sync_timeout = cpu_to_le16(qos->bcast.sync_timeout);
+			cp.sync_cte_type = qos->bcast.sync_cte_type;
 
 			break;
 		}

@@ -2131,17 +2125,15 @@ static int create_pa_sync(struct hci_dev *hdev, void *data)
 
 	hci_dev_unlock(hdev);
 
-	if (cp) {
+	if (bacmp(&cp.addr, BDADDR_ANY)) {
 		hci_dev_set_flag(hdev, HCI_PA_SYNC);
 		set_bit(HCI_CONN_CREATE_PA_SYNC, &conn->flags);
 
 		err = __hci_cmd_sync_status(hdev, HCI_OP_LE_PA_CREATE_SYNC,
-					    sizeof(*cp), cp, HCI_CMD_TIMEOUT);
+					    sizeof(cp), &cp, HCI_CMD_TIMEOUT);
 		if (!err)
 			err = hci_update_passive_scan_sync(hdev);
 
-		kfree(cp);
-
 		if (err) {
 			hci_dev_clear_flag(hdev, HCI_PA_SYNC);
 			clear_bit(HCI_CONN_CREATE_PA_SYNC, &conn->flags);

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #75 lore raw

PATCH 75/164 Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <[email protected]>

[ Upstream commit 6d0417e4e1cf66fd917f06f0454958362714ef7d ]

Broadcast Receiver requires creating PA sync but the command just generates a status so this makes use of __hci_cmd_sync_status_sk to wait for HCI_EV_LE_PA_SYNC_ESTABLISHED, also because of this chance it is not longer necessary to use a custom method to serialize the process of creating the PA sync since the cmd_work_sync itself ensures only one command would be pending which now awaits for HCI_EV_LE_PA_SYNC_ESTABLISHED before proceeding to next connection.

Fixes 4a5e0ba68676 ("Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending")

Signed-off-by Luiz Augusto von Dentz <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 include/net/bluetooth/hci.h      |  2 +
 include/net/bluetooth/hci_core.h | 13 +++--
 include/net/bluetooth/hci_sync.h |  2 +
 net/bluetooth/hci_conn.c         | 92 +-------------------------------
 net/bluetooth/hci_event.c        |  6 +--
 net/bluetooth/hci_sync.c         | 87 ++++++++++++++++++++++++++++--
 6 files changed, 95 insertions(+), 107 deletions(-)

include/net/bluetooth/hci.h +2 -0

index 71d2432876406..3d1599cdbb8d0 100644
@@ -1913,6 +1913,8 @@ struct hci_cp_le_pa_create_sync {
 	__u8      sync_cte_type;
 } __packed;
 
+#define HCI_OP_LE_PA_CREATE_SYNC_CANCEL	0x2045
+
 #define HCI_OP_LE_PA_TERM_SYNC		0x2046
 struct hci_cp_le_pa_term_sync {
 	__le16    handle;

include/net/bluetooth/hci_core.h +6 -7

index 4245910ffc4a2..1753869000164 100644
@@ -1105,10 +1105,8 @@ static inline struct hci_conn *hci_conn_hash_lookup_bis(struct hci_dev *hdev,
 	return NULL;
 }
 
-static inline struct hci_conn *hci_conn_hash_lookup_sid(struct hci_dev *hdev,
-							__u8 sid,
-							bdaddr_t *dst,
-							__u8 dst_type)
+static inline struct hci_conn *
+hci_conn_hash_lookup_create_pa_sync(struct hci_dev *hdev)
 {
 	struct hci_conn_hash *h = &hdev->conn_hash;
 	struct hci_conn  *c;

@@ -1116,8 +1114,10 @@ static inline struct hci_conn *hci_conn_hash_lookup_sid(struct hci_dev *hdev,
 	rcu_read_lock();
 
 	list_for_each_entry_rcu(c, &h->list, list) {
-		if (c->type != ISO_LINK  || bacmp(&c->dst, dst) ||
-		    c->dst_type != dst_type || c->sid != sid)
+		if (c->type != ISO_LINK)
+			continue;
+
+		if (!test_bit(HCI_CONN_CREATE_PA_SYNC, &c->flags))
 			continue;
 
 		rcu_read_unlock();

@@ -1506,7 +1506,6 @@ bool hci_setup_sync(struct hci_conn *conn, __u16 handle);
 void hci_sco_setup(struct hci_conn *conn, __u8 status);
 bool hci_iso_setup_path(struct hci_conn *conn);
 int hci_le_create_cis_pending(struct hci_dev *hdev);
-int hci_pa_create_sync_pending(struct hci_dev *hdev);
 int hci_le_big_create_sync_pending(struct hci_dev *hdev);
 int hci_conn_check_create_cis(struct hci_conn *conn);

include/net/bluetooth/hci_sync.h +2 -0

index f3052cb252efd..fbc4d753ef842 100644
@@ -186,3 +186,5 @@ int hci_connect_le_sync(struct hci_dev *hdev, struct hci_conn *conn);
 int hci_cancel_connect_sync(struct hci_dev *hdev, struct hci_conn *conn);
 int hci_le_conn_update_sync(struct hci_dev *hdev, struct hci_conn *conn,
 			    struct hci_conn_params *params);
+
+int hci_connect_pa_sync(struct hci_dev *hdev, struct hci_conn *conn);

net/bluetooth/hci_conn.c +2 ~~-90~~

107 lines not on this page · raw message

net/bluetooth/hci_event.c +1 -5

index 96ad1b75d1c4d..bdf36ce06c68c 100644
@@ -6368,8 +6368,7 @@ static void hci_le_pa_sync_estabilished_evt(struct hci_dev *hdev, void *data,
 
 	hci_dev_clear_flag(hdev, HCI_PA_SYNC);
 
-	conn = hci_conn_hash_lookup_sid(hdev, ev->sid, &ev->bdaddr,
-					ev->bdaddr_type);
+	conn = hci_conn_hash_lookup_create_pa_sync(hdev);
 	if (!conn) {
 		bt_dev_err(hdev,
 			   "Unable to find connection for dst %pMR sid 0x%2.2x",

@@ -6408,9 +6407,6 @@ static void hci_le_pa_sync_estabilished_evt(struct hci_dev *hdev, void *data,
 	}
 
 unlock:
-	/* Handle any other pending PA sync command */
-	hci_pa_create_sync_pending(hdev);
-
 	hci_dev_unlock(hdev);
 }

net/bluetooth/hci_sync.c +82 -5

101 lines not on this page · raw message

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #76 lore raw

PATCH 76/164 Bluetooth: hci_conn: Fix not setting timeout for BIG Create Sync

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <[email protected]>

[ Upstream commit 024421cf39923927ab2b5fe895d1d922b9abe67f ]

BIG Create Sync requires the command to just generates a status so this makes use of __hci_cmd_sync_status_sk to wait for HCI_EVT_LE_BIG_SYNC_ESTABLISHED, also because of this chance it is not longer necessary to use a custom method to serialize the process of creating the BIG sync since the cmd_work_sync itself ensures only one command would be pending which now awaits for HCI_EVT_LE_BIG_SYNC_ESTABLISHED before proceeding to next connection.

Fixes 42ecf1947135 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending")

Signed-off-by Luiz Augusto von Dentz <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 include/net/bluetooth/hci.h      |  2 +-
 include/net/bluetooth/hci_core.h |  7 ++-
 include/net/bluetooth/hci_sync.h |  1 +
 net/bluetooth/hci_conn.c         | 89 ++------------------------------
 net/bluetooth/hci_event.c        |  9 ++--
 net/bluetooth/hci_sync.c         | 63 ++++++++++++++++++++++
 net/bluetooth/iso.c              | 26 +++++-----
 7 files changed, 88 insertions(+), 109 deletions(-)

include/net/bluetooth/hci.h +1 -1

index 3d1599cdbb8d0..40fce4193cc1d 100644
@@ -2814,7 +2814,7 @@ struct hci_evt_le_create_big_complete {
 	__le16  bis_handle[];
 } __packed;
 
-#define HCI_EVT_LE_BIG_SYNC_ESTABILISHED 0x1d
+#define HCI_EVT_LE_BIG_SYNC_ESTABLISHED 0x1d
 struct hci_evt_le_big_sync_estabilished {
 	__u8    status;
 	__u8    handle;

include/net/bluetooth/hci_core.h +3 -4

index 1753869000164..4f3b537476e10 100644
@@ -1506,7 +1506,6 @@ bool hci_setup_sync(struct hci_conn *conn, __u16 handle);
 void hci_sco_setup(struct hci_conn *conn, __u8 status);
 bool hci_iso_setup_path(struct hci_conn *conn);
 int hci_le_create_cis_pending(struct hci_dev *hdev);
-int hci_le_big_create_sync_pending(struct hci_dev *hdev);
 int hci_conn_check_create_cis(struct hci_conn *conn);
 
 struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst,

@@ -1547,9 +1546,9 @@ struct hci_conn *hci_connect_bis(struct hci_dev *hdev, bdaddr_t *dst,
 				 __u8 data_len, __u8 *data);
 struct hci_conn *hci_pa_create_sync(struct hci_dev *hdev, bdaddr_t *dst,
 		       __u8 dst_type, __u8 sid, struct bt_iso_qos *qos);
-int hci_le_big_create_sync(struct hci_dev *hdev, struct hci_conn *hcon,
-			   struct bt_iso_qos *qos,
-			   __u16 sync_handle, __u8 num_bis, __u8 bis[]);
+int hci_conn_big_create_sync(struct hci_dev *hdev, struct hci_conn *hcon,
+			     struct bt_iso_qos *qos, __u16 sync_handle,
+			     __u8 num_bis, __u8 bis[]);
 int hci_conn_check_link_mode(struct hci_conn *conn);
 int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level);
 int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type,

include/net/bluetooth/hci_sync.h +1 -0

index fbc4d753ef842..dbabc17b30cdf 100644
@@ -188,3 +188,4 @@ int hci_le_conn_update_sync(struct hci_dev *hdev, struct hci_conn *conn,
 			    struct hci_conn_params *params);
 
 int hci_connect_pa_sync(struct hci_dev *hdev, struct hci_conn *conn);
+int hci_connect_big_sync(struct hci_dev *hdev, struct hci_conn *conn);

net/bluetooth/hci_conn.c +5 ~~-84~~

103 lines not on this page · raw message

net/bluetooth/hci_event.c +3 -6

index bdf36ce06c68c..bc5b42fce2b80 100644
@@ -6918,7 +6918,7 @@ static void hci_le_big_sync_established_evt(struct hci_dev *hdev, void *data,
 
 	bt_dev_dbg(hdev, "status 0x%2.2x", ev->status);
 
-	if (!hci_le_ev_skb_pull(hdev, skb, HCI_EVT_LE_BIG_SYNC_ESTABILISHED,
+	if (!hci_le_ev_skb_pull(hdev, skb, HCI_EVT_LE_BIG_SYNC_ESTABLISHED,
 				flex_array_size(ev, bis, ev->num_bis)))
 		return;

@@ -6988,9 +6988,6 @@ static void hci_le_big_sync_established_evt(struct hci_dev *hdev, void *data,
 		}
 
 unlock:
-	/* Handle any other pending BIG sync command */
-	hci_le_big_create_sync_pending(hdev);
-
 	hci_dev_unlock(hdev);
 }

@@ -7112,8 +7109,8 @@ static const struct hci_le_ev {
 		     hci_le_create_big_complete_evt,
 		     sizeof(struct hci_evt_le_create_big_complete),
 		     HCI_MAX_EVENT_SIZE),
-	/* [0x1d = HCI_EV_LE_BIG_SYNC_ESTABILISHED] */
-	HCI_LE_EV_VL(HCI_EVT_LE_BIG_SYNC_ESTABILISHED,
+	/* [0x1d = HCI_EV_LE_BIG_SYNC_ESTABLISHED] */
+	HCI_LE_EV_VL(HCI_EVT_LE_BIG_SYNC_ESTABLISHED,
 		     hci_le_big_sync_established_evt,
 		     sizeof(struct hci_evt_le_big_sync_estabilished),
 		     HCI_MAX_EVENT_SIZE),

net/bluetooth/hci_sync.c +63 -0

66 lines not on this page · raw message

net/bluetooth/iso.c +12 ~~-14~~

index 644b606743e21..72bf9b1db2247 100644
@@ -1414,14 +1414,13 @@ static void iso_conn_big_sync(struct sock *sk)
 	lock_sock(sk);
 
 	if (!test_and_set_bit(BT_SK_BIG_SYNC, &iso_pi(sk)->flags)) {
-		err = hci_le_big_create_sync(hdev, iso_pi(sk)->conn->hcon,
-					     &iso_pi(sk)->qos,
-					     iso_pi(sk)->sync_handle,
-					     iso_pi(sk)->bc_num_bis,
-					     iso_pi(sk)->bc_bis);
+		err = hci_conn_big_create_sync(hdev, iso_pi(sk)->conn->hcon,
+					       &iso_pi(sk)->qos,
+					       iso_pi(sk)->sync_handle,
+					       iso_pi(sk)->bc_num_bis,
+					       iso_pi(sk)->bc_bis);
 		if (err)
-			bt_dev_err(hdev, "hci_le_big_create_sync: %d",
-				   err);
+			bt_dev_err(hdev, "hci_big_create_sync: %d", err);
 	}
 
 	release_sock(sk);

@@ -1855,7 +1854,7 @@ static void iso_conn_ready(struct iso_conn *conn)
 		if (test_bit(HCI_CONN_BIG_SYNC, &hcon->flags) ||
 		    test_bit(HCI_CONN_BIG_SYNC_FAILED, &hcon->flags)) {
 			ev = hci_recv_event_data(hcon->hdev,
-						 HCI_EVT_LE_BIG_SYNC_ESTABILISHED);
+						 HCI_EVT_LE_BIG_SYNC_ESTABLISHED);
 
 			/* Get reference to PA sync parent socket, if it exists */
 			parent = iso_get_sock(&hcon->src, &hcon->dst,

@@ -2047,12 +2046,11 @@ int iso_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags)
 
 			if (!test_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags) &&
 			    !test_and_set_bit(BT_SK_BIG_SYNC, &iso_pi(sk)->flags)) {
-				err = hci_le_big_create_sync(hdev,
-							     hcon,
-							     &iso_pi(sk)->qos,
-							     iso_pi(sk)->sync_handle,
-							     iso_pi(sk)->bc_num_bis,
-							     iso_pi(sk)->bc_bis);
+				err = hci_conn_big_create_sync(hdev, hcon,
+							       &iso_pi(sk)->qos,
+							       iso_pi(sk)->sync_handle,
+							       iso_pi(sk)->bc_num_bis,
+							       iso_pi(sk)->bc_bis);
 				if (err) {
 					bt_dev_err(hdev, "hci_le_big_create_sync: %d",
 						   err);

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #77 lore raw

PATCH 77/164 Bluetooth: btintel_pcie: Avoid redundant buffer allocation

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kiran K <[email protected]>

[ Upstream commit d1af1f02ef8653dea4573e444136c8331189cd59 ]

Reuse the skb buffer provided by the PCIe driver to pass it onto the stack, instead of copying it to a new skb.

Fixes c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")

Signed-off-by Kiran K <[email protected]>

Reviewed-by Paul Menzel <[email protected]>

Signed-off-by Luiz Augusto von Dentz <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/bluetooth/btintel_pcie.c | 33 ++++++++++++--------------------
 1 file changed, 12 insertions(+), 21 deletions(-)

drivers/bluetooth/btintel_pcie.c +12 ~~-21~~

index ab465e13c1f60..3d6067927f7ea 100644
@@ -581,8 +581,10 @@ static int btintel_pcie_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
 		/* This is a debug event that comes from IML and OP image when it
 		 * starts execution. There is no need pass this event to stack.
 		 */
-		if (skb->data[2] == 0x97)
+		if (skb->data[2] == 0x97) {
+			hci_recv_diag(hdev, skb);
 			return 0;
+		}
 	}
 
 	return hci_recv_frame(hdev, skb);

@@ -598,7 +600,6 @@ static int btintel_pcie_recv_frame(struct btintel_pcie_data *data,
 	u8 pkt_type;
 	u16 plen;
 	u32 pcie_pkt_type;
-	struct sk_buff *new_skb;
 	void *pdata;
 	struct hci_dev *hdev = data->hdev;

@@ -675,24 +676,20 @@ static int btintel_pcie_recv_frame(struct btintel_pcie_data *data,
 
 	bt_dev_dbg(hdev, "pkt_type: 0x%2.2x len: %u", pkt_type, plen);
 
-	new_skb = bt_skb_alloc(plen, GFP_ATOMIC);
-	if (!new_skb) {
-		bt_dev_err(hdev, "Failed to allocate memory for skb of len: %u",
-			   skb->len);
-		ret = -ENOMEM;
-		goto exit_error;
-	}
-
-	hci_skb_pkt_type(new_skb) = pkt_type;
-	skb_put_data(new_skb, skb->data, plen);
+	hci_skb_pkt_type(skb) = pkt_type;
 	hdev->stat.byte_rx += plen;
+	skb_trim(skb, plen);
 
 	if (pcie_pkt_type == BTINTEL_PCIE_HCI_EVT_PKT)
-		ret = btintel_pcie_recv_event(hdev, new_skb);
+		ret = btintel_pcie_recv_event(hdev, skb);
 	else
-		ret = hci_recv_frame(hdev, new_skb);
+		ret = hci_recv_frame(hdev, skb);
+	skb = NULL; /* skb is freed in the callee  */
 
 exit_error:
+	if (skb)
+		kfree_skb(skb);
+
 	if (ret)
 		hdev->stat.err_rx++;

@@ -706,16 +703,10 @@ static void btintel_pcie_rx_work(struct work_struct *work)
 	struct btintel_pcie_data *data = container_of(work,
 					struct btintel_pcie_data, rx_work);
 	struct sk_buff *skb;
-	int err;
-	struct hci_dev *hdev = data->hdev;
 
 	/* Process the sk_buf in queue and send to the HCI layer */
 	while ((skb = skb_dequeue(&data->rx_skb_q))) {
-		err = btintel_pcie_recv_frame(data, skb);
-		if (err)
-			bt_dev_err(hdev, "Failed to send received frame: %d",
-				   err);
-		kfree_skb(skb);
+		btintel_pcie_recv_frame(data, skb);
 	}
 }

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #78 lore raw

PATCH 78/164 Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue()

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: En-Wei Wu <[email protected]>

[ Upstream commit 0317b033abcd1d8dd2798f0e2de5e84543d0bd22 ]

A NULL pointer dereference can occur in skb_dequeue() when processing a QCA firmware crash dump on WCN7851 (0489:e0f3).

[ 93.672166] Bluetooth: hci0: ACL memdump size(589824)

[ 93.672475] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 93.672517] Workqueue: hci0 hci_devcd_rx [bluetooth]
[ 93.672598] RIP: 0010:skb_dequeue+0x50/0x80

The issue stems from handle_dump_pkt_qca() returning 0 even when a dump packet is successfully processed. This is because it incorrectly forwards the return value of hci_devcd_init() (which returns 0 on success). As a result, the caller (btusb_recv_acl_qca() or btusb_recv_evt_qca()) assumes the packet was not handled and passes it to hci_recv_frame(), leading to premature kfree() of the skb.

Later, hci_devcd_rx() attempts to dequeue the same skb from the dump queue, resulting in a NULL pointer dereference.

Fix this by:
1. Making handle_dump_pkt_qca() return 0 on success and negative errno on failure, consistent with kernel conventions.
2. Splitting dump packet detection into separate functions for ACL and event packets for better structure and readability.

This ensures dump packets are properly identified and consumed, avoiding double handling and preventing NULL pointer access.

Fixes 20981ce2d5a5 ("Bluetooth: btusb: Add WCN6855 devcoredump support")

Signed-off-by En-Wei Wu <[email protected]>

Signed-off-by Luiz Augusto von Dentz <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/bluetooth/btusb.c | 101 +++++++++++++++++++++++++++-----------
 1 file changed, 73 insertions(+), 28 deletions(-)

drivers/bluetooth/btusb.c +73 ~~-28~~

index f784daaa6b528..7e1f03231b4c9 100644
@@ -2975,22 +2975,16 @@ static void btusb_coredump_qca(struct hci_dev *hdev)
 		bt_dev_err(hdev, "%s: triggle crash failed (%d)", __func__, err);
 }
 
-/*
- * ==0: not a dump pkt.
- * < 0: fails to handle a dump pkt
- * > 0: otherwise.
- */
+/* Return: 0 on success, negative errno on failure. */
 static int handle_dump_pkt_qca(struct hci_dev *hdev, struct sk_buff *skb)
 {
-	int ret = 1;
+	int ret = 0;
 	u8 pkt_type;
 	u8 *sk_ptr;
 	unsigned int sk_len;
 	u16 seqno;
 	u32 dump_size;
 
-	struct hci_event_hdr *event_hdr;
-	struct hci_acl_hdr *acl_hdr;
 	struct qca_dump_hdr *dump_hdr;
 	struct btusb_data *btdata = hci_get_drvdata(hdev);
 	struct usb_device *udev = btdata->udev;

@@ -3000,30 +2994,14 @@ static int handle_dump_pkt_qca(struct hci_dev *hdev, struct sk_buff *skb)
 	sk_len = skb->len;
 
 	if (pkt_type == HCI_ACLDATA_PKT) {
-		acl_hdr = hci_acl_hdr(skb);
-		if (le16_to_cpu(acl_hdr->handle) != QCA_MEMDUMP_ACL_HANDLE)
-			return 0;
 		sk_ptr += HCI_ACL_HDR_SIZE;
 		sk_len -= HCI_ACL_HDR_SIZE;
-		event_hdr = (struct hci_event_hdr *)sk_ptr;
-	} else {
-		event_hdr = hci_event_hdr(skb);
 	}
 
-	if ((event_hdr->evt != HCI_VENDOR_PKT)
-		|| (event_hdr->plen != (sk_len - HCI_EVENT_HDR_SIZE)))
-		return 0;
-
 	sk_ptr += HCI_EVENT_HDR_SIZE;
 	sk_len -= HCI_EVENT_HDR_SIZE;
 
 	dump_hdr = (struct qca_dump_hdr *)sk_ptr;
-	if ((sk_len < offsetof(struct qca_dump_hdr, data))
-		|| (dump_hdr->vse_class != QCA_MEMDUMP_VSE_CLASS)
-	    || (dump_hdr->msg_type != QCA_MEMDUMP_MSG_TYPE))
-		return 0;
-
-	/*it is dump pkt now*/
 	seqno = le16_to_cpu(dump_hdr->seqno);
 	if (seqno == 0) {
 		set_bit(BTUSB_HW_SSR_ACTIVE, &btdata->flags);

@@ -3097,17 +3075,84 @@ static int handle_dump_pkt_qca(struct hci_dev *hdev, struct sk_buff *skb)
 	return ret;
 }
 
+/* Return: true if the ACL packet is a dump packet, false otherwise. */
+static bool acl_pkt_is_dump_qca(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	u8 *sk_ptr;
+	unsigned int sk_len;
+
+	struct hci_event_hdr *event_hdr;
+	struct hci_acl_hdr *acl_hdr;
+	struct qca_dump_hdr *dump_hdr;
+
+	sk_ptr = skb->data;
+	sk_len = skb->len;
+
+	acl_hdr = hci_acl_hdr(skb);
+	if (le16_to_cpu(acl_hdr->handle) != QCA_MEMDUMP_ACL_HANDLE)
+		return false;
+
+	sk_ptr += HCI_ACL_HDR_SIZE;
+	sk_len -= HCI_ACL_HDR_SIZE;
+	event_hdr = (struct hci_event_hdr *)sk_ptr;
+
+	if ((event_hdr->evt != HCI_VENDOR_PKT) ||
+	    (event_hdr->plen != (sk_len - HCI_EVENT_HDR_SIZE)))
+		return false;
+
+	sk_ptr += HCI_EVENT_HDR_SIZE;
+	sk_len -= HCI_EVENT_HDR_SIZE;
+
+	dump_hdr = (struct qca_dump_hdr *)sk_ptr;
+	if ((sk_len < offsetof(struct qca_dump_hdr, data)) ||
+	    (dump_hdr->vse_class != QCA_MEMDUMP_VSE_CLASS) ||
+	    (dump_hdr->msg_type != QCA_MEMDUMP_MSG_TYPE))
+		return false;
+
+	return true;
+}
+
+/* Return: true if the event packet is a dump packet, false otherwise. */
+static bool evt_pkt_is_dump_qca(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	u8 *sk_ptr;
+	unsigned int sk_len;
+
+	struct hci_event_hdr *event_hdr;
+	struct qca_dump_hdr *dump_hdr;
+
+	sk_ptr = skb->data;
+	sk_len = skb->len;
+
+	event_hdr = hci_event_hdr(skb);
+
+	if ((event_hdr->evt != HCI_VENDOR_PKT)
+	    || (event_hdr->plen != (sk_len - HCI_EVENT_HDR_SIZE)))
+		return false;
+
+	sk_ptr += HCI_EVENT_HDR_SIZE;
+	sk_len -= HCI_EVENT_HDR_SIZE;
+
+	dump_hdr = (struct qca_dump_hdr *)sk_ptr;
+	if ((sk_len < offsetof(struct qca_dump_hdr, data)) ||
+	    (dump_hdr->vse_class != QCA_MEMDUMP_VSE_CLASS) ||
+	    (dump_hdr->msg_type != QCA_MEMDUMP_MSG_TYPE))
+		return false;
+
+	return true;
+}
+
 static int btusb_recv_acl_qca(struct hci_dev *hdev, struct sk_buff *skb)
 {
-	if (handle_dump_pkt_qca(hdev, skb))
-		return 0;
+	if (acl_pkt_is_dump_qca(hdev, skb))
+		return handle_dump_pkt_qca(hdev, skb);
 	return hci_recv_frame(hdev, skb);
 }
 
 static int btusb_recv_evt_qca(struct hci_dev *hdev, struct sk_buff *skb)
 {
-	if (handle_dump_pkt_qca(hdev, skb))
-		return 0;
+	if (evt_pkt_is_dump_qca(hdev, skb))
+		return handle_dump_pkt_qca(hdev, skb);
 	return hci_recv_frame(hdev, skb);
 }

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #79 lore raw

PATCH 79/164 Bluetooth: btintel_pcie: Add additional to checks to clear TX/RX paths

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kiran K <[email protected]>

[ Upstream commit 1c7664957e4edb234c69de2db4be1f740d2df564 ]

Due to a hardware issue, there is a possibility that the driver may miss an MSIx interrupt on the RX/TX data path. Since the TX and RX paths are independent, when a TX MSIx interrupt occurs, the driver can check the RX queue for any pending data and process it if present. The same approach applies to the RX path.

Fixes c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")

Signed-off-by Chandrashekar Devegowda <[email protected]>

Signed-off-by Kiran K <[email protected]>

Signed-off-by Luiz Augusto von Dentz <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/bluetooth/btintel_pcie.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

drivers/bluetooth/btintel_pcie.c +19 -5

index 3d6067927f7ea..d225f0a37f985 100644
@@ -761,10 +761,8 @@ static void btintel_pcie_msix_rx_handle(struct btintel_pcie_data *data)
 	bt_dev_dbg(hdev, "RXQ: cr_hia: %u  cr_tia: %u", cr_hia, cr_tia);
 
 	/* Check CR_TIA and CR_HIA for change */
-	if (cr_tia == cr_hia) {
-		bt_dev_warn(hdev, "RXQ: no new CD found");
+	if (cr_tia == cr_hia)
 		return;
-	}
 
 	rxq = &data->rxq;

@@ -800,6 +798,16 @@ static irqreturn_t btintel_pcie_msix_isr(int irq, void *data)
 	return IRQ_WAKE_THREAD;
 }
 
+static inline bool btintel_pcie_is_rxq_empty(struct btintel_pcie_data *data)
+{
+	return data->ia.cr_hia[BTINTEL_PCIE_RXQ_NUM] == data->ia.cr_tia[BTINTEL_PCIE_RXQ_NUM];
+}
+
+static inline bool btintel_pcie_is_txackq_empty(struct btintel_pcie_data *data)
+{
+	return data->ia.cr_tia[BTINTEL_PCIE_TXQ_NUM] == data->ia.cr_hia[BTINTEL_PCIE_TXQ_NUM];
+}
+
 static irqreturn_t btintel_pcie_irq_msix_handler(int irq, void *dev_id)
 {
 	struct msix_entry *entry = dev_id;

@@ -827,12 +835,18 @@ static irqreturn_t btintel_pcie_irq_msix_handler(int irq, void *dev_id)
 		btintel_pcie_msix_gp0_handler(data);
 
 	/* For TX */
-	if (intr_fh & BTINTEL_PCIE_MSIX_FH_INT_CAUSES_0)
+	if (intr_fh & BTINTEL_PCIE_MSIX_FH_INT_CAUSES_0) {
 		btintel_pcie_msix_tx_handle(data);
+		if (!btintel_pcie_is_rxq_empty(data))
+			btintel_pcie_msix_rx_handle(data);
+	}
 
 	/* For RX */
-	if (intr_fh & BTINTEL_PCIE_MSIX_FH_INT_CAUSES_1)
+	if (intr_fh & BTINTEL_PCIE_MSIX_FH_INT_CAUSES_1) {
 		btintel_pcie_msix_rx_handle(data);
+		if (!btintel_pcie_is_txackq_empty(data))
+			btintel_pcie_msix_tx_handle(data);
+	}
 
 	/*
 	 * Before sending the interrupt the HW disables it to prevent a nested

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #80 lore raw

PATCH 80/164 Bluetooth: L2CAP: copy RX timestamp to new fragments

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pauli Virtanen <[email protected]>

[ Upstream commit 3908feb1bd7f319a10e18d84369a48163264cc7d ]

Copy timestamp too when allocating new skb for received fragment. Fixes missing RX timestamps with fragmentation.

Fixes 4d7ea8ee90e4 ("Bluetooth: L2CAP: Fix handling fragmented length")

Signed-off-by Pauli Virtanen <[email protected]>

Signed-off-by Luiz Augusto von Dentz <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/bluetooth/l2cap_core.c | 3 +++
 1 file changed, 3 insertions(+)

net/bluetooth/l2cap_core.c +3 -0

index a55388fbf07c8..c219a8c596d3e 100644
@@ -7380,6 +7380,9 @@ static int l2cap_recv_frag(struct l2cap_conn *conn, struct sk_buff *skb,
 			return -ENOMEM;
 		/* Init rx_len */
 		conn->rx_len = len;
+
+		skb_set_delivery_time(conn->rx_skb, skb->tstamp,
+				      skb->tstamp_type);
 	}
 
 	/* Copy as much as the rx_skb can hold */

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #81 lore raw

PATCH 81/164 net: mscc: ocelot: delete PVID VLAN when readding it as non-PVID

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vladimir Oltean <[email protected]>

[ Upstream commit 5ec6d7d737a491256cd37e33910f7ac1978db591 ]

The following set of commands:

ip link add br0 type bridge vlan_filtering 1 # vlan_default_pvid 1 is implicit ip link set swp0 master br0
bridge vlan add dev swp0 vid 1

should result in the dropping of untagged and 802.1p-tagged traffic, but we see that it continues to be accepted. Whereas, had we deleted VID 1 instead, the aforementioned dropping would have worked

This is because the ANA_PORT_DROP_CFG update logic doesn't run, because ocelot_vlan_add() only calls ocelot_port_set_pvid() if the new VLAN has the BRIDGE_VLAN_INFO_PVID flag.

Similar to other drivers like mt7530_port_vlan_add() which handle this case correctly, we need to test whether the VLAN we're changing used to have the BRIDGE_VLAN_INFO_PVID flag, but lost it now. That amounts to a PVID deletion and should be treated as such.

Regarding blame attribution: this never worked properly since the introduction of bridge VLAN filtering in commit 7142529f1688 ("net:
mscc: ocelot: add VLAN filtering"). However, there was a significant paradigm shift which aligned the ANA_PORT_DROP_CFG register with the PVID concept rather than with the native VLAN concept, and that change wasn't targeted for 'stable'. Realistically, that is as far as this fix needs to be propagated to.

Fixes be0576fed6d3 ("net: mscc: ocelot: move the logic to drop 802.1p traffic to the pvid deletion")

Signed-off-by Vladimir Oltean <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/mscc/ocelot.c | 6 ++++++
 1 file changed, 6 insertions(+)

drivers/net/ethernet/mscc/ocelot.c +6 -0

index ef93df5208871..08bee56aea35f 100644
@@ -830,6 +830,7 @@ EXPORT_SYMBOL(ocelot_vlan_prepare);
 int ocelot_vlan_add(struct ocelot *ocelot, int port, u16 vid, bool pvid,
 		    bool untagged)
 {
+	struct ocelot_port *ocelot_port = ocelot->ports[port];
 	int err;
 
 	/* Ignore VID 0 added to our RX filter by the 8021q module, since

@@ -849,6 +850,11 @@ int ocelot_vlan_add(struct ocelot *ocelot, int port, u16 vid, bool pvid,
 					   ocelot_bridge_vlan_find(ocelot, vid));
 		if (err)
 			return err;
+	} else if (ocelot_port->pvid_vlan &&
+		   ocelot_bridge_vlan_find(ocelot, vid) == ocelot_port->pvid_vlan) {
+		err = ocelot_port_set_pvid(ocelot, port, NULL);
+		if (err)
+			return err;
 	}
 
 	/* Untagged egress vlan clasification */

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #82 lore raw

PATCH 82/164 octeon_ep_vf: Resolve netdevice usage count issue

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sathesh B Edara <[email protected]>

[ Upstream commit 8548c84c004be3da4ffbe35ed0589041a4050c03 ]

The netdevice usage count increases during transmit queue timeouts because netdev_hold is called in ndo_tx_timeout, scheduling a task to reinitialize the card. Although netdev_put is called at the end of the scheduled work, rtnl_unlock checks the reference count during cleanup. This could cause issues if transmit timeout is called on multiple queues.

Fixes cb7dd712189f ("octeon_ep_vf: Add driver framework and device initialization")

Signed-off-by Sathesh B Edara <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.c +3 -1

index 18c922dd5fc64..ccb69bc5c9529 100644
@@ -835,7 +835,9 @@ static void octep_vf_tx_timeout(struct net_device *netdev, unsigned int txqueue)
 	struct octep_vf_device *oct = netdev_priv(netdev);
 
 	netdev_hold(netdev, NULL, GFP_ATOMIC);
-	schedule_work(&oct->tx_timeout_task);
+	if (!schedule_work(&oct->tx_timeout_task))
+		netdev_put(netdev, NULL);
+
 }
 
 static int octep_vf_set_mac(struct net_device *netdev, void *p)

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #83 lore raw

PATCH 83/164 bnxt_en: improve TX timestamping FIFO configuration

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vadim Fedorenko <[email protected]>

[ Upstream commit 8f7ae5a85137b913cb97e2d24409d36548d0bab1 ]

Reconfiguration of netdev may trigger close/open procedure which can break FIFO status by adjusting the amount of empty slots for TX timestamps. But it is not really needed because timestamps for the packets sent over the wire still can be retrieved. On the other side, during netdev close procedure any skbs waiting for TX timestamps can be leaked because there is no cleaning procedure called. Free skbs waiting for TX timestamps when closing netdev.

Fixes 8aa2a79e9b95 ("bnxt_en: Increase the max total outstanding PTP TX packets to 4")

Reviewed-by Michael Chan <[email protected]>

Reviewed-by Pavan Chebbi <[email protected]>

Signed-off-by Vadim Fedorenko <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     |  5 ++--
 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c | 29 ++++++++++++++-----
 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h |  1 +
 3 files changed, 25 insertions(+), 10 deletions(-)

drivers/net/ethernet/broadcom/bnxt/bnxt.c +3 -2

index 016dcfec8d496..874a15f33bc5b 100644
@@ -3320,6 +3320,9 @@ static void bnxt_free_tx_skbs(struct bnxt *bp)
 		}
 		netdev_tx_reset_queue(netdev_get_tx_queue(bp->dev, i));
 	}
+
+	if (bp->ptp_cfg && !(bp->fw_cap & BNXT_FW_CAP_TX_TS_CMP))
+		bnxt_ptp_free_txts_skbs(bp->ptp_cfg);
 }
 
 static void bnxt_free_one_rx_ring(struct bnxt *bp, struct bnxt_rx_ring_info *rxr)

@@ -12249,8 +12252,6 @@ static int __bnxt_open_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init)
 	/* VF-reps may need to be re-opened after the PF is re-opened */
 	if (BNXT_PF(bp))
 		bnxt_vf_reps_open(bp);
-	if (bp->ptp_cfg && !(bp->fw_cap & BNXT_FW_CAP_TX_TS_CMP))
-		WRITE_ONCE(bp->ptp_cfg->tx_avail, BNXT_MAX_TX_TS);
 	bnxt_ptp_init_rtc(bp, true);
 	bnxt_ptp_cfg_tstamp_filters(bp);
 	if (BNXT_SUPPORTS_MULTI_RSS_CTX(bp))

drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c +21 -8

index 781225d3ba8ff..650034a4bb46d 100644
@@ -777,6 +777,27 @@ static long bnxt_ptp_ts_aux_work(struct ptp_clock_info *ptp_info)
 	return HZ;
 }
 
+void bnxt_ptp_free_txts_skbs(struct bnxt_ptp_cfg *ptp)
+{
+	struct bnxt_ptp_tx_req *txts_req;
+	u16 cons = ptp->txts_cons;
+
+	/* make sure ptp aux worker finished with
+	 * possible BNXT_STATE_OPEN set
+	 */
+	ptp_cancel_worker_sync(ptp->ptp_clock);
+
+	ptp->tx_avail = BNXT_MAX_TX_TS;
+	while (cons != ptp->txts_prod) {
+		txts_req = &ptp->txts_req[cons];
+		if (!IS_ERR_OR_NULL(txts_req->tx_skb))
+			dev_kfree_skb_any(txts_req->tx_skb);
+		cons = NEXT_TXTS(cons);
+	}
+	ptp->txts_cons = cons;
+	ptp_schedule_worker(ptp->ptp_clock, 0);
+}
+
 int bnxt_ptp_get_txts_prod(struct bnxt_ptp_cfg *ptp, u16 *prod)
 {
 	spin_lock_bh(&ptp->ptp_tx_lock);

@@ -1095,7 +1116,6 @@ int bnxt_ptp_init(struct bnxt *bp)
 void bnxt_ptp_clear(struct bnxt *bp)
 {
 	struct bnxt_ptp_cfg *ptp = bp->ptp_cfg;
-	int i;
 
 	if (!ptp)
 		return;

@@ -1107,12 +1127,5 @@ void bnxt_ptp_clear(struct bnxt *bp)
 	kfree(ptp->ptp_info.pin_config);
 	ptp->ptp_info.pin_config = NULL;
 
-	for (i = 0; i < BNXT_MAX_TX_TS; i++) {
-		if (ptp->txts_req[i].tx_skb) {
-			dev_kfree_skb_any(ptp->txts_req[i].tx_skb);
-			ptp->txts_req[i].tx_skb = NULL;
-		}
-	}
-
 	bnxt_unmap_ptp_regs(bp);
 }

drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h +1 -0

index 61e89bb2d2690..999b497990bce 100644
@@ -174,6 +174,7 @@ int bnxt_ptp_cfg_tstamp_filters(struct bnxt *bp);
 void bnxt_ptp_reapply_pps(struct bnxt *bp);
 int bnxt_hwtstamp_set(struct net_device *dev, struct ifreq *ifr);
 int bnxt_hwtstamp_get(struct net_device *dev, struct ifreq *ifr);
+void bnxt_ptp_free_txts_skbs(struct bnxt_ptp_cfg *ptp);
 int bnxt_ptp_get_txts_prod(struct bnxt_ptp_cfg *ptp, u16 *prod);
 void bnxt_get_tx_ts_p5(struct bnxt *bp, struct sk_buff *skb, u16 prod);
 int bnxt_get_rx_ts_p5(struct bnxt *bp, u64 *ts, u32 pkt_ts);

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #84 lore raw

PATCH 84/164 rtase: Modify the condition used to detect overflow in rtase_calc_time_mitigation

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Justin Lai <[email protected]>

[ Upstream commit 68f9d8974b545668e1be2422240b25a92e304b14 ]

Fix the following compile error reported by the kernel test robot by modifying the condition used to detect overflow in rtase_calc_time_mitigation.

In file included from include/linux/mdio.h:10:0,
from drivers/net/ethernet/realtek/rtase/rtase_main.c:58:
In function 'u16_encode_bits',
inlined from 'rtase_calc_time_mitigation.constprop' at drivers/net/ ethernet/realtek/rtase/rtase_main.c:1915:13,
inlined from 'rtase_init_software_variable.isra.41' at drivers/net/ ethernet/realtek/rtase/rtase_main.c:1961:13,
inlined from 'rtase_init_one' at drivers/net/ethernet/realtek/ rtase/rtase_main.c:2111:2:

Quoted 1 line

Quoted 1 line
include/linux/bitfield.h:178:3: error: call to '__field_overflow'

      declared with attribute error: value doesn't fit into mask
    __field_overflow();     \
    ^~~~~~~~~~~~~~~~~~

include/linux/bitfield.h:198:2: note: in expansion of macro '____MAKE_OP'
____MAKE_OP(u##size,u##size,,)
^~~~~~~~~~~
include/linux/bitfield.h:200:1: note: in expansion of macro '__MAKE_OP'
__MAKE_OP(16)
^~~~~~~~~

Reported-by kernel test robot <[email protected]>

Closes https://lore.kernel.org/oe-kbuild-all/[email protected]/ open here

Fixes a36e9f5cfe9e ("rtase: Add support for a pci table in this module")

Signed-off-by Justin Lai <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/realtek/rtase/rtase_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/net/ethernet/realtek/rtase/rtase_main.c +2 -2

index 86dd034fdddc5..3a588aaa89c58 100644
@@ -1924,8 +1924,8 @@ static u16 rtase_calc_time_mitigation(u32 time_us)
 
 	time_us = min_t(int, time_us, RTASE_MITI_MAX_TIME);
 
-	msb = fls(time_us);
-	if (msb >= RTASE_MITI_COUNT_BIT_NUM) {
+	if (time_us > RTASE_MITI_TIME_COUNT_MASK) {
+		msb = fls(time_us);
 		time_unit = msb - RTASE_MITI_COUNT_BIT_NUM;
 		time_count = time_us >> (msb - RTASE_MITI_COUNT_BIT_NUM);
 	} else {

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #85 lore raw

PATCH 85/164 net: ethernet: mtk-star-emac: fix spinlock recursion issues on rx/tx poll

Link https://patch.msgid.link/20250424-mtk_star_emac-fix-spinlock-recursion-issue-v2-1-f3fde2e529d8@collabora.com open here

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Louis-Alexis Eyraud <[email protected]>

[ Upstream commit 6fe0866014486736cc3ba1c6fd4606d3dbe55c9c ]

Use spin_lock_irqsave and spin_unlock_irqrestore instead of spin_lock and spin_unlock in mtk_star_emac driver to avoid spinlock recursion occurrence that can happen when enabling the DMA interrupts again in rx/tx poll.

```
BUG: spinlock recursion on CPU#0, swapper/0/0
 lock: 0xffff00000db9cf20, .magic: dead4ead, .owner: swapper/0/0,
    .owner_cpu: 0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted
    6.15.0-rc2-next-20250417-00001-gf6a27738686c-dirty #28 PREEMPT
Hardware name: MediaTek MT8365 Open Platform EVK (DT)
Call trace:
 show_stack+0x18/0x24 (C)
 dump_stack_lvl+0x60/0x80
 dump_stack+0x18/0x24
 spin_dump+0x78/0x88
 do_raw_spin_lock+0x11c/0x120
 _raw_spin_lock+0x20/0x2c
 mtk_star_handle_irq+0xc0/0x22c [mtk_star_emac]
 __handle_irq_event_percpu+0x48/0x140
 handle_irq_event+0x4c/0xb0
 handle_fasteoi_irq+0xa0/0x1bc
 handle_irq_desc+0x34/0x58
 generic_handle_domain_irq+0x1c/0x28
 gic_handle_irq+0x4c/0x120
 do_interrupt_handler+0x50/0x84
 el1_interrupt+0x34/0x68
 el1h_64_irq_handler+0x18/0x24
 el1h_64_irq+0x6c/0x70
 regmap_mmio_read32le+0xc/0x20 (P)
 _regmap_bus_reg_read+0x6c/0xac
 _regmap_read+0x60/0xdc
 regmap_read+0x4c/0x80
 mtk_star_rx_poll+0x2f4/0x39c [mtk_star_emac]
 __napi_poll+0x38/0x188
 net_rx_action+0x164/0x2c0
 handle_softirqs+0x100/0x244
 __do_softirq+0x14/0x20
 ____do_softirq+0x10/0x20
 call_on_irq_stack+0x24/0x64
 do_softirq_own_stack+0x1c/0x40
 __irq_exit_rcu+0xd4/0x10c
 irq_exit_rcu+0x10/0x1c
 el1_interrupt+0x38/0x68
 el1h_64_irq_handler+0x18/0x24
 el1h_64_irq+0x6c/0x70
 cpuidle_enter_state+0xac/0x320 (P)
 cpuidle_enter+0x38/0x50
 do_idle+0x1e4/0x260
 cpu_startup_entry+0x34/0x3c
 rest_init+0xdc/0xe0
 console_on_rootfs+0x0/0x6c
 __primary_switched+0x88/0x90
```

Fixes 0a8bd81fd6aa ("net: ethernet: mtk-star-emac: separate tx/rx handling with two NAPIs")

Signed-off-by Louis-Alexis Eyraud <[email protected]>

Reviewed-by Maxime Chevallier <[email protected]>

Acked-by Bartosz Golaszewski <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/mediatek/mtk_star_emac.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

drivers/net/ethernet/mediatek/mtk_star_emac.c +6 -4

index 25989c79c92e6..47a00e02365a2 100644
@@ -1163,6 +1163,7 @@ static int mtk_star_tx_poll(struct napi_struct *napi, int budget)
 	struct net_device *ndev = priv->ndev;
 	unsigned int head = ring->head;
 	unsigned int entry = ring->tail;
+	unsigned long flags;
 
 	while (entry != head && count < (MTK_STAR_RING_NUM_DESCS - 1)) {
 		ret = mtk_star_tx_complete_one(priv);

@@ -1182,9 +1183,9 @@ static int mtk_star_tx_poll(struct napi_struct *napi, int budget)
 		netif_wake_queue(ndev);
 
 	if (napi_complete(napi)) {
-		spin_lock(&priv->lock);
+		spin_lock_irqsave(&priv->lock, flags);
 		mtk_star_enable_dma_irq(priv, false, true);
-		spin_unlock(&priv->lock);
+		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 
 	return 0;

@@ -1341,6 +1342,7 @@ static int mtk_star_rx(struct mtk_star_priv *priv, int budget)
 static int mtk_star_rx_poll(struct napi_struct *napi, int budget)
 {
 	struct mtk_star_priv *priv;
+	unsigned long flags;
 	int work_done = 0;
 
 	priv = container_of(napi, struct mtk_star_priv, rx_napi);

@@ -1348,9 +1350,9 @@ static int mtk_star_rx_poll(struct napi_struct *napi, int budget)
 	work_done = mtk_star_rx(priv, budget);
 	if (work_done < budget) {
 		napi_complete_done(napi, work_done);
-		spin_lock(&priv->lock);
+		spin_lock_irqsave(&priv->lock, flags);
 		mtk_star_enable_dma_irq(priv, true, false);
-		spin_unlock(&priv->lock);
+		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 
 	return work_done;

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:02 UTC #86 lore raw

PATCH 86/164 net: ethernet: mtk-star-emac: rearm interrupts in rx_poll only when advised

Link https://patch.msgid.link/20250424-mtk_star_emac-fix-spinlock-recursion-issue-v2-2-f3fde2e529d8@collabora.com open here

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Louis-Alexis Eyraud <[email protected]>

[ Upstream commit e54b4db35e201a9173da9cb7abc8377e12abaf87 ]

In mtk_star_rx_poll function, on event processing completion, the mtk_star_emac driver calls napi_complete_done but ignores its return code and enable RX DMA interrupts inconditionally. This return code gives the info if a device should avoid rearming its interrupts or not, so fix this behaviour by taking it into account.

Fixes 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver")

Signed-off-by Louis-Alexis Eyraud <[email protected]>

Acked-by Bartosz Golaszewski <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/mediatek/mtk_star_emac.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

drivers/net/ethernet/mediatek/mtk_star_emac.c +1 -2

index 47a00e02365a2..c2ab87828d858 100644
@@ -1348,8 +1348,7 @@ static int mtk_star_rx_poll(struct napi_struct *napi, int budget)
 	priv = container_of(napi, struct mtk_star_priv, rx_napi);
 
 	work_done = mtk_star_rx(priv, budget);
-	if (work_done < budget) {
-		napi_complete_done(napi, work_done);
+	if (work_done < budget && napi_complete_done(napi, work_done)) {
 		spin_lock_irqsave(&priv->lock, flags);
 		mtk_star_enable_dma_irq(priv, true, false);
 		spin_unlock_irqrestore(&priv->lock, flags);

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #87 lore raw

PATCH 87/164 net: ethernet: mtk_eth_soc: sync mtk_clks_source_name array

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Golle <[email protected]>

[ Upstream commit 8c47d5753a119f1c986bc3ed92e9178d2624e1e8 ]

When removing the clock bits for clocks which aren't used by the Ethernet driver their names should also have been removed from the mtk_clks_source_name array.

Remove them now as enum mtk_clks_map needs to match the mtk_clks_source_name array so the driver can make sure that all required clocks are present and correctly name missing clocks.

Fixes 887b1d1adb2e ("net: ethernet: mtk_eth_soc: drop clocks unused by Ethernet driver")

Signed-off-by Daniel Golle <[email protected]>

Link https://patch.msgid.link/d075e706ff1cebc07f9ec666736d0b32782fd487.1745555321.git.daniel@makrotopia.org open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 4 ----
 1 file changed, 4 deletions(-)

drivers/net/ethernet/mediatek/mtk_eth_soc.c +0 -4

index 223aee1af4430..5e7280479ca1c 100644
@@ -269,12 +269,8 @@ static const char * const mtk_clks_source_name[] = {
 	"ethwarp_wocpu2",
 	"ethwarp_wocpu1",
 	"ethwarp_wocpu0",
-	"top_usxgmii0_sel",
-	"top_usxgmii1_sel",
 	"top_sgm0_sel",
 	"top_sgm1_sel",
-	"top_xfi_phy0_xtal_sel",
-	"top_xfi_phy1_xtal_sel",
 	"top_eth_gmii_sel",
 	"top_eth_refck_50m_sel",
 	"top_eth_sys_200m_sel",

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #88 lore raw

PATCH 88/164 pds_core: make pdsc_auxbus_dev_del() void

Link https://patch.msgid.link/r/[email protected] open here

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shannon Nelson <[email protected]>

[ Upstream commit e8562da829432d04a0de1830146984c89844f35e ]

Since there really is no useful return, advertising a return value is rather misleading. Make pdsc_auxbus_dev_del() a void function.

Reviewed-by Leon Romanovsky <[email protected]>

Reviewed-by Jonathan Cameron <[email protected]>

Reviewed-by Dave Jiang <[email protected]>

Signed-off-by Shannon Nelson <[email protected]>

Signed-off-by Jason Gunthorpe <[email protected]>

Stable-dep-of: dfd76010f8e8 ("pds_core: remove write-after-free of client_id")

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/amd/pds_core/auxbus.c  | 7 +------
 drivers/net/ethernet/amd/pds_core/core.h    | 2 +-
 drivers/net/ethernet/amd/pds_core/devlink.c | 6 ++++--
 3 files changed, 6 insertions(+), 9 deletions(-)

drivers/net/ethernet/amd/pds_core/auxbus.c +1 -6

index b76a9b7e0aed6..d53b2124b1498 100644
@@ -172,13 +172,9 @@ static struct pds_auxiliary_dev *pdsc_auxbus_dev_register(struct pdsc *cf,
 	return padev;
 }
 
-int pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf)
+void pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf)
 {
 	struct pds_auxiliary_dev *padev;
-	int err = 0;
-
-	if (!cf)
-		return -ENODEV;
 
 	mutex_lock(&pf->config_lock);

@@ -192,7 +188,6 @@ int pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf)
 	pf->vfs[cf->vf_id].padev = NULL;
 
 	mutex_unlock(&pf->config_lock);
-	return err;
 }
 
 int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf)

drivers/net/ethernet/amd/pds_core/core.h +1 -1

index ec637dc4327a5..08b8280437dcf 100644
@@ -304,7 +304,7 @@ int pdsc_register_notify(struct notifier_block *nb);
 void pdsc_unregister_notify(struct notifier_block *nb);
 void pdsc_notify(unsigned long event, void *data);
 int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf);
-int pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf);
+void pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf);
 
 void pdsc_process_adminq(struct pdsc_qcq *qcq);
 void pdsc_work_thread(struct work_struct *work);

drivers/net/ethernet/amd/pds_core/devlink.c +4 -2

index ca23cde385e67..48a7c22fe3320 100644
@@ -56,8 +56,10 @@ int pdsc_dl_enable_set(struct devlink *dl, u32 id,
 	for (vf_id = 0; vf_id < pdsc->num_vfs; vf_id++) {
 		struct pdsc *vf = pdsc->vfs[vf_id].vf;
 
-		err = ctx->val.vbool ? pdsc_auxbus_dev_add(vf, pdsc) :
-				       pdsc_auxbus_dev_del(vf, pdsc);
+		if (ctx->val.vbool)
+			err = pdsc_auxbus_dev_add(vf, pdsc);
+		else
+			pdsc_auxbus_dev_del(vf, pdsc);
 	}
 
 	return err;

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #89 lore raw

PATCH 89/164 pds_core: specify auxiliary_device to be created

Link https://patch.msgid.link/r/[email protected] open here

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shannon Nelson <[email protected]>

[ Upstream commit b699bdc720c0255d1bb76cecba7382c1f2107af5 ]

In preparation for adding a new auxiliary_device for the PF, make the vif type an argument to pdsc_auxbus_dev_add(). Pass in the address of the padev pointer so that the caller can specify where to save it and keep the mutex usage within the function.

Reviewed-by Leon Romanovsky <[email protected]>

Reviewed-by Jonathan Cameron <[email protected]>

Reviewed-by Dave Jiang <[email protected]>

Signed-off-by Shannon Nelson <[email protected]>

Signed-off-by Jason Gunthorpe <[email protected]>

Stable-dep-of: dfd76010f8e8 ("pds_core: remove write-after-free of client_id")

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/amd/pds_core/auxbus.c  | 37 ++++++++++-----------
 drivers/net/ethernet/amd/pds_core/core.h    |  7 ++--
 drivers/net/ethernet/amd/pds_core/devlink.c |  5 +--
 drivers/net/ethernet/amd/pds_core/main.c    | 11 +++---
 4 files changed, 33 insertions(+), 27 deletions(-)

drivers/net/ethernet/amd/pds_core/auxbus.c +18 ~~-19~~

index d53b2124b1498..4d3387bebe6a4 100644
@@ -172,29 +172,32 @@ static struct pds_auxiliary_dev *pdsc_auxbus_dev_register(struct pdsc *cf,
 	return padev;
 }
 
-void pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf)
+void pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf,
+			 struct pds_auxiliary_dev **pd_ptr)
 {
 	struct pds_auxiliary_dev *padev;
 
+	if (!*pd_ptr)
+		return;
+
 	mutex_lock(&pf->config_lock);
 
-	padev = pf->vfs[cf->vf_id].padev;
-	if (padev) {
-		pds_client_unregister(pf, padev->client_id);
-		auxiliary_device_delete(&padev->aux_dev);
-		auxiliary_device_uninit(&padev->aux_dev);
-		padev->client_id = 0;
-	}
-	pf->vfs[cf->vf_id].padev = NULL;
+	padev = *pd_ptr;
+	pds_client_unregister(pf, padev->client_id);
+	auxiliary_device_delete(&padev->aux_dev);
+	auxiliary_device_uninit(&padev->aux_dev);
+	padev->client_id = 0;
+	*pd_ptr = NULL;
 
 	mutex_unlock(&pf->config_lock);
 }
 
-int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf)
+int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf,
+			enum pds_core_vif_types vt,
+			struct pds_auxiliary_dev **pd_ptr)
 {
 	struct pds_auxiliary_dev *padev;
 	char devname[PDS_DEVNAME_LEN];
-	enum pds_core_vif_types vt;
 	unsigned long mask;
 	u16 vt_support;
 	int client_id;

@@ -203,6 +206,9 @@ int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf)
 	if (!cf)
 		return -ENODEV;
 
+	if (vt >= PDS_DEV_TYPE_MAX)
+		return -EINVAL;
+
 	mutex_lock(&pf->config_lock);
 
 	mask = BIT_ULL(PDSC_S_FW_DEAD) |

@@ -214,17 +220,10 @@ int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf)
 		goto out_unlock;
 	}
 
-	/* We only support vDPA so far, so it is the only one to
-	 * be verified that it is available in the Core device and
-	 * enabled in the devlink param.  In the future this might
-	 * become a loop for several VIF types.
-	 */
-
 	/* Verify that the type is supported and enabled.  It is not
 	 * an error if there is no auxbus device support for this
 	 * VF, it just means something else needs to happen with it.
 	 */
-	vt = PDS_DEV_TYPE_VDPA;
 	vt_support = !!le16_to_cpu(pf->dev_ident.vif_types[vt]);
 	if (!(vt_support &&
 	      pf->viftype_status[vt].supported &&

@@ -250,7 +249,7 @@ int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf)
 		err = PTR_ERR(padev);
 		goto out_unlock;
 	}
-	pf->vfs[cf->vf_id].padev = padev;
+	*pd_ptr = padev;
 
 out_unlock:
 	mutex_unlock(&pf->config_lock);

drivers/net/ethernet/amd/pds_core/core.h +5 -2

index 08b8280437dcf..becd3104473c2 100644
@@ -303,8 +303,11 @@ void pdsc_health_thread(struct work_struct *work);
 int pdsc_register_notify(struct notifier_block *nb);
 void pdsc_unregister_notify(struct notifier_block *nb);
 void pdsc_notify(unsigned long event, void *data);
-int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf);
-void pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf);
+int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf,
+			enum pds_core_vif_types vt,
+			struct pds_auxiliary_dev **pd_ptr);
+void pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf,
+			 struct pds_auxiliary_dev **pd_ptr);
 
 void pdsc_process_adminq(struct pdsc_qcq *qcq);
 void pdsc_work_thread(struct work_struct *work);

drivers/net/ethernet/amd/pds_core/devlink.c +3 -2

index 48a7c22fe3320..d8dc39da4161f 100644
@@ -57,9 +57,10 @@ int pdsc_dl_enable_set(struct devlink *dl, u32 id,
 		struct pdsc *vf = pdsc->vfs[vf_id].vf;
 
 		if (ctx->val.vbool)
-			err = pdsc_auxbus_dev_add(vf, pdsc);
+			err = pdsc_auxbus_dev_add(vf, pdsc, vt_entry->vif_id,
+						  &pdsc->vfs[vf_id].padev);
 		else
-			pdsc_auxbus_dev_del(vf, pdsc);
+			pdsc_auxbus_dev_del(vf, pdsc, &pdsc->vfs[vf_id].padev);
 	}
 
 	return err;

drivers/net/ethernet/amd/pds_core/main.c +7 -4

index 660268ff95623..a3a68889137b6 100644
@@ -190,7 +190,8 @@ static int pdsc_init_vf(struct pdsc *vf)
 	devl_unlock(dl);
 
 	pf->vfs[vf->vf_id].vf = vf;
-	err = pdsc_auxbus_dev_add(vf, pf);
+	err = pdsc_auxbus_dev_add(vf, pf, PDS_DEV_TYPE_VDPA,
+				  &pf->vfs[vf->vf_id].padev);
 	if (err) {
 		devl_lock(dl);
 		devl_unregister(dl);

@@ -417,7 +418,7 @@ static void pdsc_remove(struct pci_dev *pdev)
 
 		pf = pdsc_get_pf_struct(pdsc->pdev);
 		if (!IS_ERR(pf)) {
-			pdsc_auxbus_dev_del(pdsc, pf);
+			pdsc_auxbus_dev_del(pdsc, pf, &pf->vfs[pdsc->vf_id].padev);
 			pf->vfs[pdsc->vf_id].vf = NULL;
 		}
 	} else {

@@ -482,7 +483,8 @@ static void pdsc_reset_prepare(struct pci_dev *pdev)
 
 		pf = pdsc_get_pf_struct(pdsc->pdev);
 		if (!IS_ERR(pf))
-			pdsc_auxbus_dev_del(pdsc, pf);
+			pdsc_auxbus_dev_del(pdsc, pf,
+					    &pf->vfs[pdsc->vf_id].padev);
 	}
 
 	pdsc_unmap_bars(pdsc);

@@ -527,7 +529,8 @@ static void pdsc_reset_done(struct pci_dev *pdev)
 
 		pf = pdsc_get_pf_struct(pdsc->pdev);
 		if (!IS_ERR(pf))
-			pdsc_auxbus_dev_add(pdsc, pf);
+			pdsc_auxbus_dev_add(pdsc, pf, PDS_DEV_TYPE_VDPA,
+					    &pf->vfs[pdsc->vf_id].padev);
 	}
 }

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #90 lore raw

PATCH 90/164 pds_core: remove write-after-free of client_id

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shannon Nelson <[email protected]>

[ Upstream commit dfd76010f8e821b66116dec3c7d90dd2403d1396 ]

A use-after-free error popped up in stress testing:

[Mon Apr 21 21:21:33 2025] BUG: KFENCE: use-after-free write in pdsc_auxbus_dev_del+0xef/0x160 [pds_core]
[Mon Apr 21 21:21:33 2025] Use-after-free write at 0x000000007013ecd1 (in kfence-#47):
[Mon Apr 21 21:21:33 2025]  pdsc_auxbus_dev_del+0xef/0x160 [pds_core]
[Mon Apr 21 21:21:33 2025]  pdsc_remove+0xc0/0x1b0 [pds_core]
[Mon Apr 21 21:21:33 2025]  pci_device_remove+0x24/0x70
[Mon Apr 21 21:21:33 2025]  device_release_driver_internal+0x11f/0x180
[Mon Apr 21 21:21:33 2025]  driver_detach+0x45/0x80
[Mon Apr 21 21:21:33 2025]  bus_remove_driver+0x83/0xe0
[Mon Apr 21 21:21:33 2025]  pci_unregister_driver+0x1a/0x80

The actual device uninit usually happens on a separate thread scheduled after this code runs, but there is no guarantee of order of thread execution, so this could be a problem. There's no actual need to clear the client_id at this point, so simply remove the offending code.

Fixes 10659034c622 ("pds_core: add the aux client API")

Signed-off-by Shannon Nelson <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/amd/pds_core/auxbus.c | 1 -
 1 file changed, 1 deletion(-)

drivers/net/ethernet/amd/pds_core/auxbus.c +0 -1

index 4d3387bebe6a4..889a18962270a 100644
@@ -186,7 +186,6 @@ void pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf,
 	pds_client_unregister(pf, padev->client_id);
 	auxiliary_device_delete(&padev->aux_dev);
 	auxiliary_device_uninit(&padev->aux_dev);
-	padev->client_id = 0;
 	*pd_ptr = NULL;
 
 	mutex_unlock(&pf->config_lock);

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #91 lore raw

PATCH 91/164 net_sched: drr: Fix double list add in class with netem as child qdisc

[1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Victor Nogueira <[email protected]>

[ Upstream commit f99a3fbf023e20b626be4b0f042463d598050c9a ]

As described in Gerrard's report [1], there are use cases where a netem child qdisc will make the parent qdisc's enqueue callback reentrant. In the case of drr, there won't be a UAF, but the code will add the same classifier to the list twice, which will cause memory corruption.

In addition to checking for qlen being zero, this patch checks whether the class was already added to the active_list (cl_is_active) before adding to the list to cover for the reentrant case.

Fixes 37d9cf1a3ce3 ("sched: Fix detection of empty queues in child qdiscs")

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 net/sched/sch_drr.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

net/sched/sch_drr.c +6 -3

index c69b999fae171..25b77ed0c1f28 100644
@@ -35,6 +35,11 @@ struct drr_sched {
 	struct Qdisc_class_hash		clhash;
 };
 
+static bool cl_is_active(struct drr_class *cl)
+{
+	return !list_empty(&cl->alist);
+}
+
 static struct drr_class *drr_find_class(struct Qdisc *sch, u32 classid)
 {
 	struct drr_sched *q = qdisc_priv(sch);

@@ -336,7 +341,6 @@ static int drr_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	struct drr_sched *q = qdisc_priv(sch);
 	struct drr_class *cl;
 	int err = 0;
-	bool first;
 
 	cl = drr_classify(skb, sch, &err);
 	if (cl == NULL) {

@@ -346,7 +350,6 @@ static int drr_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 		return err;
 	}
 
-	first = !cl->qdisc->q.qlen;
 	err = qdisc_enqueue(skb, cl->qdisc, to_free);
 	if (unlikely(err != NET_XMIT_SUCCESS)) {
 		if (net_xmit_drop_count(err)) {

@@ -356,7 +359,7 @@ static int drr_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 		return err;
 	}
 
-	if (first) {
+	if (!cl_is_active(cl)) {
 		list_add_tail(&cl->alist, &q->active);
 		cl->deficit = cl->quantum;
 	}

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #92 lore raw

PATCH 92/164 net_sched: hfsc: Fix a UAF vulnerability in class with netem as child qdisc

[1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Victor Nogueira <[email protected]>

[ Upstream commit 141d34391abbb315d68556b7c67ad97885407547 ]

As described in Gerrard's report [1], we have a UAF case when an hfsc class has a netem child qdisc. The crux of the issue is that hfsc is assuming that checking for cl->qdisc->q.qlen == 0 guarantees that it hasn't inserted the class in the vttree or eltree (which is not true for the netem duplicate case).

This patch checks the n_active class variable to make sure that the code won't insert the class in the vttree or eltree twice, catering for the reentrant case.

Fixes 37d9cf1a3ce3 ("sched: Fix detection of empty queues in child qdiscs")

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 net/sched/sch_hfsc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

net/sched/sch_hfsc.c +1 -1

index 5bb4ab9941d6e..1c857dc95e4f3 100644
@@ -1565,7 +1565,7 @@ hfsc_enqueue(struct sk_buff *skb, struct Qdisc *sch, struct sk_buff **to_free)
 		return err;
 	}
 
-	if (first) {
+	if (first && !cl->cl_nactive) {
 		if (cl->cl_flags & HFSC_RSC)
 			init_ed(cl, len);
 		if (cl->cl_flags & HFSC_FSC)

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #93 lore raw

PATCH 93/164 net_sched: ets: Fix double list add in class with netem as child qdisc

[1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Victor Nogueira <[email protected]>

[ Upstream commit 1a6d0c00fa07972384b0c308c72db091d49988b6 ]

As described in Gerrard's report [1], there are use cases where a netem child qdisc will make the parent qdisc's enqueue callback reentrant. In the case of ets, there won't be a UAF, but the code will add the same classifier to the list twice, which will cause memory corruption.

In addition to checking for qlen being zero, this patch checks whether the class was already added to the active_list (cl_is_active) before doing the addition to cater for the reentrant case.

Fixes 37d9cf1a3ce3 ("sched: Fix detection of empty queues in child qdiscs")

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 net/sched/sch_ets.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

net/sched/sch_ets.c +6 -3

index 516038a441638..9e4cd2cefa8c6 100644
@@ -74,6 +74,11 @@ static const struct nla_policy ets_class_policy[TCA_ETS_MAX + 1] = {
 	[TCA_ETS_QUANTA_BAND] = { .type = NLA_U32 },
 };
 
+static bool cl_is_active(struct ets_class *cl)
+{
+	return !list_empty(&cl->alist);
+}
+
 static int ets_quantum_parse(struct Qdisc *sch, const struct nlattr *attr,
 			     unsigned int *quantum,
 			     struct netlink_ext_ack *extack)

@@ -416,7 +421,6 @@ static int ets_qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	struct ets_sched *q = qdisc_priv(sch);
 	struct ets_class *cl;
 	int err = 0;
-	bool first;
 
 	cl = ets_classify(skb, sch, &err);
 	if (!cl) {

@@ -426,7 +430,6 @@ static int ets_qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 		return err;
 	}
 
-	first = !cl->qdisc->q.qlen;
 	err = qdisc_enqueue(skb, cl->qdisc, to_free);
 	if (unlikely(err != NET_XMIT_SUCCESS)) {
 		if (net_xmit_drop_count(err)) {

@@ -436,7 +439,7 @@ static int ets_qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 		return err;
 	}
 
-	if (first && !ets_class_is_strict(q, cl)) {
+	if (!cl_is_active(cl) && !ets_class_is_strict(q, cl)) {
 		list_add_tail(&cl->alist, &q->active);
 		cl->deficit = cl->quantum;
 	}

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #94 lore raw

PATCH 94/164 net_sched: qfq: Fix double list add in class with netem as child qdisc

[1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Victor Nogueira <[email protected]>

[ Upstream commit f139f37dcdf34b67f5bf92bc8e0f7f6b3ac63aa4 ]

As described in Gerrard's report [1], there are use cases where a netem child qdisc will make the parent qdisc's enqueue callback reentrant. In the case of qfq, there won't be a UAF, but the code will add the same classifier to the list twice, which will cause memory corruption.

This patch checks whether the class was already added to the agg->active list (cl_is_active) before doing the addition to cater for the reentrant case.

Fixes 37d9cf1a3ce3 ("sched: Fix detection of empty queues in child qdiscs")

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 net/sched/sch_qfq.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

net/sched/sch_qfq.c +7 -4

index d584c0c25899c..0a1f5ebfdd412 100644
@@ -202,6 +202,11 @@ struct qfq_sched {
  */
 enum update_reason {enqueue, requeue};
 
+static bool cl_is_active(struct qfq_class *cl)
+{
+	return !list_empty(&cl->alist);
+}
+
 static struct qfq_class *qfq_find_class(struct Qdisc *sch, u32 classid)
 {
 	struct qfq_sched *q = qdisc_priv(sch);

@@ -1217,7 +1222,6 @@ static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	struct qfq_class *cl;
 	struct qfq_aggregate *agg;
 	int err = 0;
-	bool first;
 
 	cl = qfq_classify(skb, sch, &err);
 	if (cl == NULL) {

@@ -1239,7 +1243,6 @@ static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	}
 
 	gso_segs = skb_is_gso(skb) ? skb_shinfo(skb)->gso_segs : 1;
-	first = !cl->qdisc->q.qlen;
 	err = qdisc_enqueue(skb, cl->qdisc, to_free);
 	if (unlikely(err != NET_XMIT_SUCCESS)) {
 		pr_debug("qfq_enqueue: enqueue failed %d\n", err);

@@ -1255,8 +1258,8 @@ static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	++sch->q.qlen;
 
 	agg = cl->agg;
-	/* if the queue was not empty, then done here */
-	if (!first) {
+	/* if the class is active, then done here */
+	if (cl_is_active(cl)) {
 		if (unlikely(skb == cl->qdisc->ops->peek(cl->qdisc)) &&
 		    list_first_entry(&agg->active, struct qfq_class, alist)
 		    == cl && cl->deficit < len)

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #95 lore raw

PATCH 95/164 ice: Check VF VSI Pointer Value in ice_vc_add_fdir_fltr()

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xuanqiang Luo <[email protected]>

[ Upstream commit 425c5f266b2edeee0ce16fedd8466410cdcfcfe3 ]

As mentioned in the commit baeb705fd6a7 ("ice: always check VF VSI pointer values"), we need to perform a null pointer check on the return value of ice_get_vf_vsi() before using it.

Fixes 6ebbe97a4881 ("ice: Add a per-VF limit on number of FDIR filters")

Signed-off-by Xuanqiang Luo <[email protected]>

Reviewed-by Przemek Kitszel <[email protected]>

Signed-off-by Tony Nguyen <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/intel/ice/ice_virtchnl_fdir.c | 5 +++++
 1 file changed, 5 insertions(+)

drivers/net/ethernet/intel/ice/ice_virtchnl_fdir.c +5 -0

index 14e3f0f89c78d..ef755cee64ca9 100644
@@ -2091,6 +2091,11 @@ int ice_vc_add_fdir_fltr(struct ice_vf *vf, u8 *msg)
 	pf = vf->pf;
 	dev = ice_pf_to_dev(pf);
 	vf_vsi = ice_get_vf_vsi(vf);
+	if (!vf_vsi) {
+		dev_err(dev, "Can not get FDIR vf_vsi for VF %u\n", vf->vf_id);
+		v_ret = VIRTCHNL_STATUS_ERR_PARAM;
+		goto err_exit;
+	}
 
 #define ICE_VF_MAX_FDIR_FILTERS	128
 	if (!ice_fdir_num_avail_fltr(&pf->hw, vf_vsi) ||

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #96 lore raw

PATCH 96/164 idpf: fix offloads support for encapsulated packets

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Madhu Chittim <[email protected]>

[ Upstream commit 713dd6c2deca88cba0596b1e2576f7b7a8e5c59e ]

Split offloads into csum, tso and other offloads so that tunneled packets do not by default have all the offloads enabled.

Stateless offloads for encapsulated packets are not yet supported in firmware/software but in the driver we were setting the features same as non encapsulated features.

Fixed naming to clarify CSUM bits are being checked for Tx.

Inherit netdev features to VLAN interfaces as well.

Fixes 0fe45467a104 ("idpf: add create vport and netdev configuration")

Reviewed-by Sridhar Samudrala <[email protected]>

Signed-off-by Madhu Chittim <[email protected]>

Tested-by Zachary Goldstein <[email protected]>

Tested-by Samuel Salin <[email protected]>

Signed-off-by Tony Nguyen <[email protected]>

Reviewed-by Willem de Bruijn <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/intel/idpf/idpf.h     | 18 +++----
 drivers/net/ethernet/intel/idpf/idpf_lib.c | 57 ++++++++--------------
 2 files changed, 27 insertions(+), 48 deletions(-)

drivers/net/ethernet/intel/idpf/idpf.h +8 ~~-10~~

index 66544faab710a..aef0e9775a330 100644
@@ -629,13 +629,13 @@ bool idpf_is_capability_ena(struct idpf_adapter *adapter, bool all,
 	VIRTCHNL2_CAP_RX_HSPLIT_AT_L4V4	|\
 	VIRTCHNL2_CAP_RX_HSPLIT_AT_L4V6)
 
-#define IDPF_CAP_RX_CSUM_L4V4 (\
-	VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_TCP	|\
-	VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_UDP)
+#define IDPF_CAP_TX_CSUM_L4V4 (\
+	VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_TCP	|\
+	VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_UDP)
 
-#define IDPF_CAP_RX_CSUM_L4V6 (\
-	VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_TCP	|\
-	VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_UDP)
+#define IDPF_CAP_TX_CSUM_L4V6 (\
+	VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_TCP	|\
+	VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_UDP)
 
 #define IDPF_CAP_RX_CSUM (\
 	VIRTCHNL2_CAP_RX_CSUM_L3_IPV4		|\

@@ -644,11 +644,9 @@ bool idpf_is_capability_ena(struct idpf_adapter *adapter, bool all,
 	VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_TCP	|\
 	VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_UDP)
 
-#define IDPF_CAP_SCTP_CSUM (\
+#define IDPF_CAP_TX_SCTP_CSUM (\
 	VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_SCTP	|\
-	VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_SCTP	|\
-	VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_SCTP	|\
-	VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_SCTP)
+	VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_SCTP)
 
 #define IDPF_CAP_TUNNEL_TX_CSUM (\
 	VIRTCHNL2_CAP_TX_CSUM_L3_SINGLE_TUNNEL	|\

drivers/net/ethernet/intel/idpf/idpf_lib.c +19 ~~-38~~

80 lines not on this page · raw message

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #97 lore raw

PATCH 97/164 scsi: ufs: core: Remove redundant query_complete trace

Link https://lore.kernel.org/r/20250425010605epcms2p67e89b351398832fe0fd547404d3afc65@epcms2p6 open here

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Keoseong Park <[email protected]>

[ Upstream commit 0e9693b97a0eee1df7bae33aec207c975fbcbdb8 ]

The query_complete trace was not removed after ufshcd_issue_dev_cmd() was called from the bsg path, resulting in duplicate output.

Below is an example of the trace:

 ufs-utils-773     [000] .....   218.176933: ufshcd_upiu: query_send: 0000:00:04.0: HDR:16 00 00 1f 00 01 00 00 00 00 00 00, OSF:03 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ufs-utils-773     [000] .....   218.177145: ufshcd_upiu: query_complete: 0000:00:04.0: HDR:36 00 00 1f 00 01 00 00 00 00 00 00, OSF:03 07 00 00 00 00 00 00 00 00 00 08 00 00 00 00
 ufs-utils-773     [000] .....   218.177146: ufshcd_upiu: query_complete: 0000:00:04.0: HDR:36 00 00 1f 00 01 00 00 00 00 00 00, OSF:03 07 00 00 00 00 00 00 00 00 00 08 00 00 00 00

Remove the redundant trace call in the bsg path, preventing duplication.

Signed-off-by Keoseong Park <[email protected]>

Fixes 71aabb747d5f ("scsi: ufs: core: Reuse exec_dev_cmd")

Reviewed-by Avri Altman <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/ufs/core/ufshcd.c | 2 --
 1 file changed, 2 deletions(-)

drivers/ufs/core/ufshcd.c +0 -2

index 8d4a5b8371b63..a9b032d2f4a8d 100644
@@ -7256,8 +7256,6 @@ static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba,
 			err = -EINVAL;
 		}
 	}
-	ufshcd_add_query_upiu_trace(hba, err ? UFS_QUERY_ERR : UFS_QUERY_COMP,
-				    (struct utp_upiu_req *)lrbp->ucd_rsp_ptr);
 
 	return err;
 }

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #98 lore raw

PATCH 98/164 ALSA: ump: Fix buffer overflow at UMP SysEx message conversion

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

[ Upstream commit 56f1f30e6795b890463d9b20b11e576adf5a2f77 ]

The conversion function from MIDI 1.0 to UMP packet contains an internal buffer to keep the incoming MIDI bytes, and its size is 4, as it was supposed to be the max size for a MIDI1 UMP packet data. However, the implementation overlooked that SysEx is handled in a different format, and it can be up to 6 bytes, as found in do_convert_to_ump(). It leads eventually to a buffer overflow, and may corrupt the memory when a longer SysEx message is received.

The fix is simply to extend the buffer size to 6 to fit with the SysEx UMP message.

Fixes 0b5288f5fe63 ("ALSA: ump: Add legacy raw MIDI support")

Reported-by Argusee <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 include/sound/ump_convert.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

include/sound/ump_convert.h +1 -1

index d099ae27f8491..682499b871eac 100644
@@ -19,7 +19,7 @@ struct ump_cvt_to_ump_bank {
 /* context for converting from MIDI1 byte stream to UMP packet */
 struct ump_cvt_to_ump {
 	/* MIDI1 intermediate buffer */
-	unsigned char buf[4];
+	unsigned char buf[6]; /* up to 6 bytes for SysEx */
 	int len;
 	int cmd_bytes;

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #99 lore raw

PATCH 99/164 nvme-pci: fix queue unquiesce check on slot_reset

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Keith Busch <[email protected]>

[ Upstream commit a75401227eeb827b1a162df1aa9d5b33da921c43 ]

A zero return means the reset was successfully scheduled. We don't want to unquiesce the queues while the reset_work is pending, as that will just flush out requeued requests to a failed completion.

Fixes 71a5bb153be104 ("nvme: ensure disabling pairs with unquiesce")

Reported-by Dhankaran Singh Ajravat <[email protected]>

Signed-off-by Keith Busch <[email protected]>

Signed-off-by Christoph Hellwig <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/nvme/host/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/nvme/host/pci.c +1 -1

index e70618e8d35eb..83ee433b69415 100644
@@ -3535,7 +3535,7 @@ static pci_ers_result_t nvme_slot_reset(struct pci_dev *pdev)
 
 	dev_info(dev->ctrl.device, "restart after slot reset\n");
 	pci_restore_state(pdev);
-	if (!nvme_try_sched_reset(&dev->ctrl))
+	if (nvme_try_sched_reset(&dev->ctrl))
 		nvme_unquiesce_io_queues(&dev->ctrl);
 	return PCI_ERS_RESULT_RECOVERED;
 }

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #100 lore raw

PATCH 100/164 drm/tests: shmem: Fix memleak

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Maxime Ripard <[email protected]>

[ Upstream commit 48ccf21fa8dc595c8aa4f1d347b593dcae0727d0 ]

The drm_gem_shmem_test_get_pages_sgt() gets a scatter-gather table using the drm_gem_shmem_get_sg_table() function and rightfully calls sg_free_table() on it. However, it's also supposed to kfree() the returned sg_table, but doesn't.

This leads to a memory leak, reported by kmemleak. Fix it by adding a kunit action to kfree the sgt when the test ends.

Reported-by Philipp Stanner <[email protected]>

Closes https://lore.kernel.org/dri-devel/[email protected]/ open here

Fixes 93032ae634d4 ("drm/test: add a test suite for GEM objects backed by shmem")

Reviewed-by Javier Martinez Canillas <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Maxime Ripard <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/gpu/drm/tests/drm_gem_shmem_test.c | 3 +++
 1 file changed, 3 insertions(+)

drivers/gpu/drm/tests/drm_gem_shmem_test.c +3 -0

index fd4215e2f982d..925fbc2cda700 100644
@@ -216,6 +216,9 @@ static void drm_gem_shmem_test_get_pages_sgt(struct kunit *test)
 	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, sgt);
 	KUNIT_EXPECT_NULL(test, shmem->sgt);
 
+	ret = kunit_add_action_or_reset(test, kfree_wrapper, sgt);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
 	ret = kunit_add_action_or_reset(test, sg_free_table_wrapper, sgt);
 	KUNIT_ASSERT_EQ(test, ret, 0);

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #101 lore raw

PATCH 101/164 drm/mipi-dbi: Fix blanking for non-16 bit formats

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Russell Cloran <[email protected]>

[ Upstream commit 1a8bc0fe8039e1e57f68c4a588f0403d98bfeb1f ]

On r6x2b6x2g6x2 displays not enough blank data is sent to blank the entire screen. When support for these displays was added, the dirty function was updated to handle the different amount of data, but blanking was not, and remained hardcoded as 2 bytes per pixel.

This change applies almost the same algorithm used in the dirty function to the blank function, but there is no fb available at that point, and no concern about having to transform any data, so the dbidev pixel format is always used for calculating the length.

Fixes 4aebb79021f3 ("drm/mipi-dbi: Add support for DRM_FORMAT_RGB888")

Signed-off-by Russell Cloran <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Maxime Ripard <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/gpu/drm/drm_mipi_dbi.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

drivers/gpu/drm/drm_mipi_dbi.c +5 -1

index 34bca75675766..3ea9f23b4f67a 100644
@@ -404,12 +404,16 @@ static void mipi_dbi_blank(struct mipi_dbi_dev *dbidev)
 	u16 height = drm->mode_config.min_height;
 	u16 width = drm->mode_config.min_width;
 	struct mipi_dbi *dbi = &dbidev->dbi;
-	size_t len = width * height * 2;
+	const struct drm_format_info *dst_format;
+	size_t len;
 	int idx;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
+	dst_format = drm_format_info(dbidev->pixel_format);
+	len = drm_format_info_min_pitch(dst_format, 0, width) * height;
+
 	memset(dbidev->tx_buf, 0, len);
 
 	mipi_dbi_set_window_address(dbidev, 0, width - 1, 0, height - 1);

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #102 lore raw

PATCH 102/164 net: dlink: Correct endianness handling of led_mode

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Simon Horman <[email protected]>

[ Upstream commit e7e5ae71831c44d58627a991e603845a2fed2cab ]

As it's name suggests, parse_eeprom() parses EEPROM data.

This is done by reading data, 16 bits at a time as follows:

	for (i = 0; i < 128; i++)
                ((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom(np, i));

sromdata is at the same memory location as psrom. And the type of psrom is a pointer to struct t_SROM.

As can be seen in the loop above, data is stored in sromdata, and thus psrom, as 16-bit little-endian values.

However, the integer fields of t_SROM are host byte order integers. And in the case of led_mode this leads to a little endian value being incorrectly treated as host byte order.

Looking at rio_set_led_mode, this does appear to be a bug as that code masks led_mode with 0x1, 0x2 and 0x8. Logic that would be effected by a reversed byte order.

This problem would only manifest on big endian hosts.

Found by inspection while investigating a sparse warning regarding the crc field of t_SROM.

I believe that warning is a false positive. And although I plan to send a follow-up to use little-endian types for other the integer fields of PSROM_t I do not believe that will involve any bug fixes.

Compile tested only.

Fixes c3f45d322cbd ("dl2k: Add support for IP1000A-based cards")

Signed-off-by Simon Horman <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/dlink/dl2k.c | 2 +-
 drivers/net/ethernet/dlink/dl2k.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

drivers/net/ethernet/dlink/dl2k.c +1 -1

index d0ea926078706..6bf8a7aeef908 100644
@@ -352,7 +352,7 @@ parse_eeprom (struct net_device *dev)
 	eth_hw_addr_set(dev, psrom->mac_addr);
 
 	if (np->chip_id == CHIP_IP1000A) {
-		np->led_mode = psrom->led_mode;
+		np->led_mode = le16_to_cpu(psrom->led_mode);
 		return 0;
 	}

drivers/net/ethernet/dlink/dl2k.h +1 -1

index 195dc6cfd8955..0e33e2eaae960 100644
@@ -335,7 +335,7 @@ typedef struct t_SROM {
 	u16 sub_system_id;	/* 0x06 */
 	u16 pci_base_1;		/* 0x08 (IP1000A only) */
 	u16 pci_base_2;		/* 0x0a (IP1000A only) */
-	u16 led_mode;		/* 0x0c (IP1000A only) */
+	__le16 led_mode;	/* 0x0c (IP1000A only) */
 	u16 reserved1[9];	/* 0x0e-0x1f */
 	u8 mac_addr[6];		/* 0x20-0x25 */
 	u8 reserved2[10];	/* 0x26-0x2f */

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #103 lore raw

PATCH 103/164 net: mdio: mux-meson-gxl: set reversed bit when using internal phy

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Da Xue <[email protected]>

[ Upstream commit b23285e93bef729e67519a5209d5b7fde3b4af50 ]

This bit is necessary to receive packets from the internal PHY. Without this bit set, no activity occurs on the interface.

Normally u-boot sets this bit, but if u-boot is compiled without net support, the interface will be up but without any activity. If bit is set once, it will work until the IP is powered down or reset.

The vendor SDK sets this bit along with the PHY_ID bits.

Signed-off-by Da Xue <[email protected]>

Fixes 9a24e1ff4326 ("net: mdio: add amlogic gxl mdio mux support")

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/mdio/mdio-mux-meson-gxl.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

drivers/net/mdio/mdio-mux-meson-gxl.c +2 -1

index 89554021b5ccc..f9f02d3136492 100644
@@ -17,6 +17,7 @@
 #define  REG2_LEDACT		GENMASK(23, 22)
 #define  REG2_LEDLINK		GENMASK(25, 24)
 #define  REG2_DIV4SEL		BIT(27)
+#define  REG2_REVERSED		BIT(28)
 #define  REG2_ADCBYPASS		BIT(30)
 #define  REG2_CLKINSEL		BIT(31)
 #define ETH_REG3		0x4

@@ -65,7 +66,7 @@ static void gxl_enable_internal_mdio(struct gxl_mdio_mux *priv)
 	 * The only constraint is that it must match the one in
 	 * drivers/net/phy/meson-gxl.c to properly match the PHY.
 	 */
-	writel(FIELD_PREP(REG2_PHYID, EPHY_GXL_ID),
+	writel(REG2_REVERSED | FIELD_PREP(REG2_PHYID, EPHY_GXL_ID),
 	       priv->regs + ETH_REG2);
 
 	/* Enable the internal phy */

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #104 lore raw

PATCH 104/164 idpf: fix potential memory leak on kcalloc() failure

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michal Swiatkowski <[email protected]>

[ Upstream commit 8a558cbda51bef09773c72bf74a32047479110c7 ]

In case of failing on rss_data->rss_key allocation the function is freeing vport without freeing earlier allocated q_vector_idxs. Fix it.

Move from freeing in error branch to goto scheme.

Fixes d4d558718266 ("idpf: initialize interrupts and enable vport")

Reviewed-by Pavan Kumar Linga <[email protected]>

Reviewed-by Aleksandr Loktionov <[email protected]>

Signed-off-by Michal Swiatkowski <[email protected]>

Tested-by Samuel Salin <[email protected]>

Signed-off-by Tony Nguyen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/intel/idpf/idpf_lib.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

drivers/net/ethernet/intel/idpf/idpf_lib.c +11 -8

index 1c345a0e885b7..5ce663d04de00 100644
@@ -1108,11 +1108,9 @@ static struct idpf_vport *idpf_vport_alloc(struct idpf_adapter *adapter,
 
 	num_max_q = max(max_q->max_txq, max_q->max_rxq);
 	vport->q_vector_idxs = kcalloc(num_max_q, sizeof(u16), GFP_KERNEL);
-	if (!vport->q_vector_idxs) {
-		kfree(vport);
+	if (!vport->q_vector_idxs)
+		goto free_vport;
 
-		return NULL;
-	}
 	idpf_vport_init(vport, max_q);
 
 	/* This alloc is done separate from the LUT because it's not strictly

@@ -1122,11 +1120,9 @@ static struct idpf_vport *idpf_vport_alloc(struct idpf_adapter *adapter,
 	 */
 	rss_data = &adapter->vport_config[idx]->user_config.rss_data;
 	rss_data->rss_key = kzalloc(rss_data->rss_key_size, GFP_KERNEL);
-	if (!rss_data->rss_key) {
-		kfree(vport);
+	if (!rss_data->rss_key)
+		goto free_vector_idxs;
 
-		return NULL;
-	}
 	/* Initialize default rss key */
 	netdev_rss_key_fill((void *)rss_data->rss_key, rss_data->rss_key_size);

@@ -1139,6 +1135,13 @@ static struct idpf_vport *idpf_vport_alloc(struct idpf_adapter *adapter,
 	adapter->next_vport = idpf_get_free_slot(adapter);
 
 	return vport;
+
+free_vector_idxs:
+	kfree(vport->q_vector_idxs);
+free_vport:
+	kfree(vport);
+
+	return NULL;
 }
 
 /**

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #105 lore raw

PATCH 105/164 idpf: protect shutdown from reset

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Larysa Zaremba <[email protected]>

[ Upstream commit ed375b182140eeb9c73609b17939c8a29b27489e ]

Before the referenced commit, the shutdown just called idpf_remove(), this way IDPF_REMOVE_IN_PROG was protecting us from the serv_task rescheduling reset. Without this flag set the shutdown process is vulnerable to HW reset or any other triggering conditions (such as default mailbox being destroyed).

When one of conditions checked in idpf_service_task becomes true, vc_event_task can be rescheduled during shutdown, this leads to accessing freed memory e.g. idpf_req_rel_vector_indexes() trying to read vport->q_vector_idxs. This in turn causes the system to become defunct during e.g. systemctl kexec.

Considering using IDPF_REMOVE_IN_PROG would lead to more heavy shutdown process, instead just cancel the serv_task before cancelling adapter->serv_task before cancelling adapter->vc_event_task to ensure that reset will not be scheduled while we are doing a shutdown.

Fixes 4c9106f4906a ("idpf: fix adapter NULL pointer dereference on reboot")

Signed-off-by Larysa Zaremba <[email protected]>

Reviewed-by Emil Tantilov <[email protected]>

Tested-by Samuel Salin <[email protected]>

Signed-off-by Tony Nguyen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/intel/idpf/idpf_main.c | 1 +
 1 file changed, 1 insertion(+)

drivers/net/ethernet/intel/idpf/idpf_main.c +1 -0

index 7557bb6694c09..734da1680c5a4 100644
@@ -89,6 +89,7 @@ static void idpf_shutdown(struct pci_dev *pdev)
 {
 	struct idpf_adapter *adapter = pci_get_drvdata(pdev);
 
+	cancel_delayed_work_sync(&adapter->serv_task);
 	cancel_delayed_work_sync(&adapter->vc_event_task);
 	idpf_vc_core_deinit(adapter);
 	idpf_deinit_dflt_mbx(adapter);

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #106 lore raw

PATCH 106/164 igc: fix lock order in igc_ptp_reset

Link https://lore.kernel.org/intel-wired-lan/[email protected]/ open here

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jacob Keller <[email protected]>

[ Upstream commit c7d6cb96d5c33b5148f3dc76fcd30a9b8cd9e973 ]

Commit 1a931c4f5e68 ("igc: add lock preventing multiple simultaneous PTM transactions") added a new mutex to protect concurrent PTM transactions. This lock is acquired in igc_ptp_reset() in order to ensure the PTM registers are properly disabled after a device reset.

The flow where the lock is acquired already holds a spinlock, so acquiring a mutex leads to a sleep-while-locking bug, reported both by smatch, and the kernel test robot.

The critical section in igc_ptp_reset() does correctly use the readx_poll_timeout_atomic variants, but the standard PTM flow uses regular sleeping variants. This makes converting the mutex to a spinlock a bit tricky.

Instead, re-order the locking in igc_ptp_reset. Acquire the mutex first, and then the tmreg_lock spinlock. This is safe because there is no other ordering dependency on these locks, as this is the only place where both locks were acquired simultaneously. Indeed, any other flow acquiring locks in that order would be wrong regardless.

Signed-off-by Jacob Keller <[email protected]>

Fixes 1a931c4f5e68 ("igc: add lock preventing multiple simultaneous PTM transactions")

Link https://lore.kernel.org/intel-wired-lan/[email protected]/T/#u open here

Reviewed-by Przemek Kitszel <[email protected]>

Reviewed-by Vitaly Lifshits <[email protected]>

Tested-by Mor Bar-Gabay <[email protected]>

Signed-off-by Tony Nguyen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/intel/igc/igc_ptp.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

drivers/net/ethernet/intel/igc/igc_ptp.c +4 -2

index 612ed26a29c5d..efc7b30e42113 100644
@@ -1290,6 +1290,8 @@ void igc_ptp_reset(struct igc_adapter *adapter)
 	/* reset the tstamp_config */
 	igc_ptp_set_timestamp_mode(adapter, &adapter->tstamp_config);
 
+	mutex_lock(&adapter->ptm_lock);
+
 	spin_lock_irqsave(&adapter->tmreg_lock, flags);
 
 	switch (adapter->hw.mac.type) {

@@ -1308,7 +1310,6 @@ void igc_ptp_reset(struct igc_adapter *adapter)
 		if (!igc_is_crosststamp_supported(adapter))
 			break;
 
-		mutex_lock(&adapter->ptm_lock);
 		wr32(IGC_PCIE_DIG_DELAY, IGC_PCIE_DIG_DELAY_DEFAULT);
 		wr32(IGC_PCIE_PHY_DELAY, IGC_PCIE_PHY_DELAY_DEFAULT);

@@ -1332,7 +1333,6 @@ void igc_ptp_reset(struct igc_adapter *adapter)
 			netdev_err(adapter->netdev, "Timeout reading IGC_PTM_STAT register\n");
 
 		igc_ptm_reset(hw);
-		mutex_unlock(&adapter->ptm_lock);
 		break;
 	default:
 		/* No work to do. */

@@ -1349,5 +1349,7 @@ void igc_ptp_reset(struct igc_adapter *adapter)
 out:
 	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
 
+	mutex_unlock(&adapter->ptm_lock);
+
 	wrfl();
 }

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #107 lore raw

PATCH 107/164 net: ethernet: mtk_eth_soc: fix SER panic with 4GB+ RAM

Link https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/71f47ea785699c6aa3b922d66c2bdc1a43da25b1

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chad Monroe <[email protected]>

[ Upstream commit 6e0490fc36cdac696f96e57b61d93b9ae32e0f4c ]

If the mtk_poll_rx() function detects the MTK_RESETTING flag, it will jump to release_desc and refill the high word of the SDP on the 4GB RFB. Subsequently, mtk_rx_clean will process an incorrect SDP, leading to a panic.

Add patch from MediaTek's SDK to resolve this.

Fixes 2d75891ebc09 ("net: ethernet: mtk_eth_soc: support 36-bit DMA addressing on MT7988")

Signed-off-by Chad Monroe <[email protected]>

Link https://patch.msgid.link/4adc2aaeb0fb1b9cdc56bf21cf8e7fa328daa345.1745715843.git.daniel@makrotopia.org open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

drivers/net/ethernet/mediatek/mtk_eth_soc.c +9 -5

index 5e7280479ca1c..c5d5b9ff8bc42 100644
@@ -2202,14 +2202,18 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget,
 		ring->data[idx] = new_data;
 		rxd->rxd1 = (unsigned int)dma_addr;
 release_desc:
+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_36BIT_DMA)) {
+			if (unlikely(dma_addr == DMA_MAPPING_ERROR))
+				addr64 = FIELD_GET(RX_DMA_ADDR64_MASK,
+						   rxd->rxd2);
+			else
+				addr64 = RX_DMA_PREP_ADDR64(dma_addr);
+		}
+
 		if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628))
 			rxd->rxd2 = RX_DMA_LSO;
 		else
-			rxd->rxd2 = RX_DMA_PREP_PLEN0(ring->buf_size);
-
-		if (MTK_HAS_CAPS(eth->soc->caps, MTK_36BIT_DMA) &&
-		    likely(dma_addr != DMA_MAPPING_ERROR))
-			rxd->rxd2 |= RX_DMA_PREP_ADDR64(dma_addr);
+			rxd->rxd2 = RX_DMA_PREP_PLEN0(ring->buf_size) | addr64;
 
 		ring->calc_idx = idx;
 		done++;

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:03 UTC #108 lore raw

PATCH 108/164 net: dsa: felix: fix broken taprio gate states after clock jump

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vladimir Oltean <[email protected]>

[ Upstream commit 426d487bca38b34f39c483edfc6313a036446b33 ]

Simplest setup to reproduce the issue: connect 2 ports of the LS1028A-RDB together (eno0 with swp0) and run:

$ ip link set eno0 up && ip link set swp0 up
$ tc qdisc replace dev swp0 parent root handle 100 taprio num_tc 8 \
	queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 map 0 1 2 3 4 5 6 7 \
	base-time 0 sched-entry S 20 300000 sched-entry S 10 200000 \
	sched-entry S 20 300000 sched-entry S 48 200000 \
	sched-entry S 20 300000 sched-entry S 83 200000 \
	sched-entry S 40 300000 sched-entry S 00 200000 flags 2
$ ptp4l -i eno0 -f /etc/linuxptp/configs/gPTP.cfg -m &
$ ptp4l -i swp0 -f /etc/linuxptp/configs/gPTP.cfg -m

One will observe that the PTP state machine on swp0 starts synchronizing, then it attempts to do a clock step, and after that, it never fails to recover from the condition below.

ptp4l[82.427]: selected best master clock 00049f.fffe.05f627
ptp4l[82.428]: port 1 (swp0): MASTER to UNCALIBRATED on RS_SLAVE
ptp4l[83.252]: port 1 (swp0): UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED
ptp4l[83.886]: rms 4537731277 max 9075462553 freq -18518 +/- 11467 delay 818 +/- 0
ptp4l[84.170]: timed out while polling for tx timestamp
ptp4l[84.171]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[84.172]: port 1 (swp0): send peer delay request failed
ptp4l[84.173]: port 1 (swp0): clearing fault immediately
ptp4l[84.269]: port 1 (swp0): SLAVE to LISTENING on INIT_COMPLETE
ptp4l[85.303]: timed out while polling for tx timestamp
ptp4l[84.171]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[84.172]: port 1 (swp0): send peer delay request failed
ptp4l[84.173]: port 1 (swp0): clearing fault immediately
ptp4l[84.269]: port 1 (swp0): SLAVE to LISTENING on INIT_COMPLETE
ptp4l[85.303]: timed out while polling for tx timestamp
ptp4l[85.304]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[85.305]: port 1 (swp0): send peer delay response failed
ptp4l[85.306]: port 1 (swp0): clearing fault immediately
ptp4l[86.304]: timed out while polling for tx timestamp

A hint is given by the non-zero statistics for dropped packets which were expecting hardware TX timestamps:

$ ethtool --include-statistics -T swp0
(...)
Statistics:
  tx_pkts: 30
  tx_lost: 11
  tx_err: 0

We know that when PTP clock stepping takes place (from ocelot_ptp_settime64() or from ocelot_ptp_adjtime()), vsc9959_tas_clock_adjust() is called.

Another interesting hint is that placing an early return in vsc9959_tas_clock_adjust(), so as to neutralize this function, fixes the issue and TX timestamps are no longer dropped.

The debugging function written by me and included below is intended to read the GCL RAM, after the admin schedule became operational, through the two status registers available for this purpose:
QSYS_GCL_STATUS_REG_1 and QSYS_GCL_STATUS_REG_2.

static void vsc9959_print_tas_gcl(struct ocelot *ocelot)

{
	u32 val, list_length, interval, gate_state;
	int i, err;

	err = read_poll_timeout(ocelot_read, val,
				!(val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING),
				10, 100000, false, ocelot, QSYS_PARAM_STATUS_REG_8);
	if (err) {
		dev_err(ocelot->dev,
			"Failed to wait for TAS config pending bit to clear: %pe\n",
			ERR_PTR(err));
		return;
	}

	val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_3);
	list_length = QSYS_PARAM_STATUS_REG_3_LIST_LENGTH_X(val);

	dev_info(ocelot->dev, "GCL length: %u\n", list_length);

	for (i = 0; i < list_length; i++) {
		ocelot_rmw(ocelot,
			   QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM(i),
			   QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM_M,
			   QSYS_GCL_STATUS_REG_1);
		interval = ocelot_read(ocelot, QSYS_GCL_STATUS_REG_2);
		val = ocelot_read(ocelot, QSYS_GCL_STATUS_REG_1);
		gate_state = QSYS_GCL_STATUS_REG_1_GATE_STATE_X(val);

		dev_info(ocelot->dev, "GCL entry %d: states 0x%x interval %u\n",
			 i, gate_state, interval);
	}
}

Calling it from two places: after the initial QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE performed by vsc9959_qos_port_tas_set(), and after the one done by vsc9959_tas_clock_adjust(), I notice the following difference.

Quoted 1 line

From the tc-taprio process context, where the schedule was initially

configured, the GCL looks like this:

mscc_felix 0000:00:00.5: GCL length: 8
mscc_felix 0000:00:00.5: GCL entry 0: states 0x20 interval 300000 mscc_felix 0000:00:00.5: GCL entry 1: states 0x10 interval 200000 mscc_felix 0000:00:00.5: GCL entry 2: states 0x20 interval 300000 mscc_felix 0000:00:00.5: GCL entry 3: states 0x48 interval 200000 mscc_felix 0000:00:00.5: GCL entry 4: states 0x20 interval 300000 mscc_felix 0000:00:00.5: GCL entry 5: states 0x83 interval 200000 mscc_felix 0000:00:00.5: GCL entry 6: states 0x40 interval 300000 mscc_felix 0000:00:00.5: GCL entry 7: states 0x0 interval 200000

But from the ptp4l clock stepping process context, when the vsc9959_tas_clock_adjust() hook is called, the GCL RAM of the operational schedule now looks like this:

mscc_felix 0000:00:00.5: GCL length: 8
mscc_felix 0000:00:00.5: GCL entry 0: states 0x0 interval 0 mscc_felix 0000:00:00.5: GCL entry 1: states 0x0 interval 0 mscc_felix 0000:00:00.5: GCL entry 2: states 0x0 interval 0 mscc_felix 0000:00:00.5: GCL entry 3: states 0x0 interval 0 mscc_felix 0000:00:00.5: GCL entry 4: states 0x0 interval 0 mscc_felix 0000:00:00.5: GCL entry 5: states 0x0 interval 0 mscc_felix 0000:00:00.5: GCL entry 6: states 0x0 interval 0 mscc_felix 0000:00:00.5: GCL entry 7: states 0x0 interval 0

I do not have a formal explanation, just experimental conclusions. It appears that after triggering QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE for a port's TAS, the GCL entry RAM is updated anyway, despite what the documentation claims: "Specify the time interval in QSYS::GCL_CFG_REG_2.TIME_INTERVAL. This triggers the actual RAM write with the gate state and the time interval for the entry number specified". We don't touch that register (through vsc9959_tas_gcl_set()) from vsc9959_tas_clock_adjust(), yet the GCL RAM is updated anyway.

It seems to be updated with effectively stale memory, which in my testing can hold a variety of things, including even pieces of the previously applied schedule, for particular schedule lengths.

As such, in most circumstances it is very difficult to pinpoint this issue, because the newly updated schedule would "behave strangely", but ultimately might still pass traffic to some extent, due to some gate entries still being present in the stale GCL entry RAM. It is easy to miss.

With the particular schedule given at the beginning, the GCL RAM "happens" to be reproducibly rewritten with all zeroes, and this is consistent with what we see: when the time-aware shaper has gate entries with all gates closed, traffic is dropped on TX, no wonder we can't retrieve TX timestamps.

Rewriting the GCL entry RAM when reapplying the new base time fixes the observed issue.

Fixes 8670dc33f48b ("net: dsa: felix: update base time of time-aware shaper when adjusting PTP time")

Reported-by Richie Pearn <[email protected]>

Signed-off-by Vladimir Oltean <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/dsa/ocelot/felix_vsc9959.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

drivers/net/dsa/ocelot/felix_vsc9959.c +4 -1

index 940f1b71226d6..7b35d24c38d76 100644
@@ -1543,7 +1543,7 @@ static void vsc9959_tas_clock_adjust(struct ocelot *ocelot)
 	struct tc_taprio_qopt_offload *taprio;
 	struct ocelot_port *ocelot_port;
 	struct timespec64 base_ts;
-	int port;
+	int i, port;
 	u32 val;
 
 	mutex_lock(&ocelot->fwd_domain_lock);

@@ -1575,6 +1575,9 @@ static void vsc9959_tas_clock_adjust(struct ocelot *ocelot)
 			   QSYS_PARAM_CFG_REG_3_BASE_TIME_SEC_MSB_M,
 			   QSYS_PARAM_CFG_REG_3);
 
+		for (i = 0; i < taprio->num_entries; i++)
+			vsc9959_tas_gcl_set(ocelot, i, &taprio->entries[i]);
+
 		ocelot_rmw(ocelot, QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE,
 			   QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE,
 			   QSYS_TAS_PARAM_CFG_CTRL);

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #109 lore raw

PATCH 109/164 net: ipv6: fix UDPv6 GSO segmentation with NAT

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <[email protected]>

[ Upstream commit b936a9b8d4a585ccb6d454921c36286bfe63e01d ]

If any address or port is changed, update it in all packets and recalculate checksum.

Fixes 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.")

Signed-off-by Felix Fietkau <[email protected]>

Reviewed-by Willem de Bruijn <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 net/ipv4/udp_offload.c | 61 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 60 insertions(+), 1 deletion(-)

net/ipv4/udp_offload.c +60 -1

index ecfca59f31f13..da5d4aea1b591 100644
@@ -247,6 +247,62 @@ static struct sk_buff *__udpv4_gso_segment_list_csum(struct sk_buff *segs)
 	return segs;
 }
 
+static void __udpv6_gso_segment_csum(struct sk_buff *seg,
+				     struct in6_addr *oldip,
+				     const struct in6_addr *newip,
+				     __be16 *oldport, __be16 newport)
+{
+	struct udphdr *uh = udp_hdr(seg);
+
+	if (ipv6_addr_equal(oldip, newip) && *oldport == newport)
+		return;
+
+	if (uh->check) {
+		inet_proto_csum_replace16(&uh->check, seg, oldip->s6_addr32,
+					  newip->s6_addr32, true);
+
+		inet_proto_csum_replace2(&uh->check, seg, *oldport, newport,
+					 false);
+		if (!uh->check)
+			uh->check = CSUM_MANGLED_0;
+	}
+
+	*oldip = *newip;
+	*oldport = newport;
+}
+
+static struct sk_buff *__udpv6_gso_segment_list_csum(struct sk_buff *segs)
+{
+	const struct ipv6hdr *iph;
+	const struct udphdr *uh;
+	struct ipv6hdr *iph2;
+	struct sk_buff *seg;
+	struct udphdr *uh2;
+
+	seg = segs;
+	uh = udp_hdr(seg);
+	iph = ipv6_hdr(seg);
+	uh2 = udp_hdr(seg->next);
+	iph2 = ipv6_hdr(seg->next);
+
+	if (!(*(const u32 *)&uh->source ^ *(const u32 *)&uh2->source) &&
+	    ipv6_addr_equal(&iph->saddr, &iph2->saddr) &&
+	    ipv6_addr_equal(&iph->daddr, &iph2->daddr))
+		return segs;
+
+	while ((seg = seg->next)) {
+		uh2 = udp_hdr(seg);
+		iph2 = ipv6_hdr(seg);
+
+		__udpv6_gso_segment_csum(seg, &iph2->saddr, &iph->saddr,
+					 &uh2->source, uh->source);
+		__udpv6_gso_segment_csum(seg, &iph2->daddr, &iph->daddr,
+					 &uh2->dest, uh->dest);
+	}
+
+	return segs;
+}
+
 static struct sk_buff *__udp_gso_segment_list(struct sk_buff *skb,
 					      netdev_features_t features,
 					      bool is_ipv6)

@@ -259,7 +315,10 @@ static struct sk_buff *__udp_gso_segment_list(struct sk_buff *skb,
 
 	udp_hdr(skb)->len = htons(sizeof(struct udphdr) + mss);
 
-	return is_ipv6 ? skb : __udpv4_gso_segment_list_csum(skb);
+	if (is_ipv6)
+		return __udpv6_gso_segment_list_csum(skb);
+	else
+		return __udpv4_gso_segment_list_csum(skb);
 }
 
 struct sk_buff *__udp_gso_segment(struct sk_buff *gso_skb,

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #110 lore raw

PATCH 110/164 ALSA: hda/realtek: Fix built-mic regression on other ASUS models

Link https://bugzilla.kernel.org/show_bug.cgi?id=220058

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

[ Upstream commit 4d5b71b487291da9f92e352c0a7e39f256d60db8 ]

A few ASUS models use the ALC256_FIXUP_ASUS_HEADSET_MODE although they have no built-in mic pin on NID 0x13, as found in the commit c1732ede5e80 ("ALSA: hda/realtek - Fix headset and mic on several Asus laptops with ALC256"). This was relatively harmless in the past as NID 0x13 was assigned as the secondary mic. But since the fix for the pin sort order, this pin became the primary one, hence user started noticing the broken input, and we've fixed already for a few ASUS models to switch to ALC256_FIXUP_ASUS_MIC_NO_PRESENCE.

This patch corrects the other ASUS models to use the right quirk entry for fixing the built-in mic regression. Here we cover X541SA (1043:12e0), X541UV (1043:12f0), Z550SA (1043:13bf0) and X555UB (1043:1ccd).

Fixes 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort")

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 sound/pci/hda/patch_realtek.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

sound/pci/hda/patch_realtek.c +4 -4

index 5a36cb2969b08..db72c5fce9d18 100644
@@ -10723,10 +10723,10 @@ static const struct hda_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x12a3, "Asus N7691ZM", ALC269_FIXUP_ASUS_N7601ZM),
 	SND_PCI_QUIRK(0x1043, 0x12af, "ASUS UX582ZS", ALC245_FIXUP_CS35L41_SPI_2),
 	SND_PCI_QUIRK(0x1043, 0x12b4, "ASUS B3405CCA / P3405CCA", ALC294_FIXUP_ASUS_CS35L41_SPI_2),
-	SND_PCI_QUIRK(0x1043, 0x12e0, "ASUS X541SA", ALC256_FIXUP_ASUS_MIC),
-	SND_PCI_QUIRK(0x1043, 0x12f0, "ASUS X541UV", ALC256_FIXUP_ASUS_MIC),
+	SND_PCI_QUIRK(0x1043, 0x12e0, "ASUS X541SA", ALC256_FIXUP_ASUS_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1043, 0x12f0, "ASUS X541UV", ALC256_FIXUP_ASUS_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1043, 0x1313, "Asus K42JZ", ALC269VB_FIXUP_ASUS_MIC_NO_PRESENCE),
-	SND_PCI_QUIRK(0x1043, 0x13b0, "ASUS Z550SA", ALC256_FIXUP_ASUS_MIC),
+	SND_PCI_QUIRK(0x1043, 0x13b0, "ASUS Z550SA", ALC256_FIXUP_ASUS_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_ASUS_ZENBOOK),
 	SND_PCI_QUIRK(0x1043, 0x1433, "ASUS GX650PY/PZ/PV/PU/PYV/PZV/PIV/PVV", ALC285_FIXUP_ASUS_I2C_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1460, "Asus VivoBook 15", ALC256_FIXUP_ASUS_MIC_NO_PRESENCE),

@@ -10780,7 +10780,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x1c92, "ASUS ROG Strix G15", ALC285_FIXUP_ASUS_G533Z_PINS),
 	SND_PCI_QUIRK(0x1043, 0x1c9f, "ASUS G614JU/JV/JI", ALC285_FIXUP_ASUS_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1caf, "ASUS G634JY/JZ/JI/JG", ALC285_FIXUP_ASUS_SPI_REAR_SPEAKERS),
-	SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC),
+	SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1043, 0x1ccf, "ASUS G814JU/JV/JI", ALC245_FIXUP_CS35L41_SPI_2),
 	SND_PCI_QUIRK(0x1043, 0x1cdf, "ASUS G814JY/JZ/JG", ALC245_FIXUP_CS35L41_SPI_2),
 	SND_PCI_QUIRK(0x1043, 0x1cef, "ASUS G834JY/JZ/JI/JG", ALC285_FIXUP_ASUS_HEADSET_MIC),

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #111 lore raw

PATCH 111/164 bnxt_en: Fix error handling path in bnxt_init_chip()

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shravya KN <[email protected]>

[ Upstream commit 9ab7a709c926c16b4433cf02d04fcbcf35aaab2b ]

WARN_ON() is triggered in __flush_work() if bnxt_init_chip() fails because we call cancel_work_sync() on dim work that has not been initialized.

WARNING: CPU: 37 PID: 5223 at kernel/workqueue.c:4201 __flush_work.isra.0+0x212/0x230

The driver relies on the BNXT_STATE_NAPI_DISABLED bit to check if dim work has already been cancelled. But in the bnxt_open() path, BNXT_STATE_NAPI_DISABLED is not set and this causes the error path to think that it needs to cancel the uninitalized dim work. Fix it by setting BNXT_STATE_NAPI_DISABLED during initialization. The bit will be cleared when we enable NAPI and initialize dim work.

Fixes 40452969a506 ("bnxt_en: Fix DIM shutdown")

Reviewed-by Somnath Kotur <[email protected]>

Signed-off-by Shravya KN <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 +++
 1 file changed, 3 insertions(+)

drivers/net/ethernet/broadcom/bnxt/bnxt.c +3 -0

index 874a15f33bc5b..026f0d7569e1c 100644
@@ -11079,6 +11079,9 @@ static void bnxt_init_napi(struct bnxt *bp)
 		poll_fn = bnxt_poll_p5;
 	else if (BNXT_CHIP_TYPE_NITRO_A0(bp))
 		cp_nr_rings--;
+
+	set_bit(BNXT_STATE_NAPI_DISABLED, &bp->state);
+
 	for (i = 0; i < cp_nr_rings; i++) {
 		bnapi = bp->bnapi[i];
 		netif_napi_add(bp->dev, &bnapi->napi, poll_fn);

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #112 lore raw

PATCH 112/164 bnxt_en: Fix ethtool selftest output in one of the failure cases

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kalesh AP <[email protected]>

[ Upstream commit 8e6cc9045380f3f0c48ebda2bda5e1abe263388d ]

When RDMA driver is loaded, running offline self test is not supported and driver returns failure early. But it is not clearing the input buffer and hence the application prints some junk characters for individual test results.

Fix it by clearing the buffer before returning.

Fixes 895621f1c816 ("bnxt_en: Don't support offline self test when RoCE driver is loaded")

Reviewed-by Somnath Kotur <[email protected]>

Signed-off-by Kalesh AP <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +1 -1

index b901ecb57f255..36da52c0b9af6 100644
@@ -4848,6 +4848,7 @@ static void bnxt_self_test(struct net_device *dev, struct ethtool_test *etest,
 	if (!bp->num_tests || !BNXT_PF(bp))
 		return;
 
+	memset(buf, 0, sizeof(u64) * bp->num_tests);
 	if (etest->flags & ETH_TEST_FL_OFFLINE &&
 	    bnxt_ulp_registered(bp->edev)) {
 		etest->flags |= ETH_TEST_FL_FAILED;

@@ -4855,7 +4856,6 @@ static void bnxt_self_test(struct net_device *dev, struct ethtool_test *etest,
 		return;
 	}
 
-	memset(buf, 0, sizeof(u64) * bp->num_tests);
 	if (!netif_running(dev)) {
 		etest->flags |= ETH_TEST_FL_FAILED;
 		return;

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #113 lore raw

PATCH 113/164 bnxt_en: Add missing skb_mark_for_recycle() in bnxt_rx_vlan()

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Somnath Kotur <[email protected]>

[ Upstream commit a63db07e4ecd45b027718168faf7d798bb47bf58 ]

If bnxt_rx_vlan() fails because the VLAN protocol ID is invalid, the SKB is freed but we're missing the call to recycle it. This may cause the warning:

"page_pool_release_retry() stalled pool shutdown"

Add the missing skb_mark_for_recycle() in bnxt_rx_vlan().

Fixes 86b05508f775 ("bnxt_en: Use the unified RX page pool buffers for XDP and non-XDP")

Reviewed-by Pavan Chebbi <[email protected]>

Signed-off-by Somnath Kotur <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 1 +
 1 file changed, 1 insertion(+)

drivers/net/ethernet/broadcom/bnxt/bnxt.c +1 -0

index 026f0d7569e1c..74be0dd6f7a53 100644
@@ -1986,6 +1986,7 @@ static struct sk_buff *bnxt_rx_vlan(struct sk_buff *skb, u8 cmp_type,
 	}
 	return skb;
 vlan_err:
+	skb_mark_for_recycle(skb);
 	dev_kfree_skb(skb);
 	return NULL;
 }

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #114 lore raw

PATCH 114/164 bnxt_en: call pci_alloc_irq_vectors() after bnxt_reserve_rings()

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kashyap Desai <[email protected]>

[ Upstream commit 1ae04e489dd757e1e61999362f33e7c554c3b9e3 ]

On some architectures (e.g. ARM), calling pci_alloc_irq_vectors() will immediately cause the MSIX table to be written. This will not work if we haven't called bnxt_reserve_rings() to properly map the MSIX table to the MSIX vectors reserved by FW.

Fix the FW error recovery path to delay the bnxt_init_int_mode() -> pci_alloc_irq_vectors() call by removing it from bnxt_hwrm_if_change(). bnxt_request_irq() later in the code path will call it and by then the MSIX table is properly mapped.

Fixes 4343838ca5eb ("bnxt_en: Replace deprecated PCI MSIX APIs")

Signed-off-by Kashyap Desai <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

drivers/net/ethernet/broadcom/bnxt/bnxt.c +1 -6

index 74be0dd6f7a53..e4d5bd30cf319 100644
@@ -11851,13 +11851,8 @@ static int bnxt_hwrm_if_change(struct bnxt *bp, bool up)
 				set_bit(BNXT_STATE_ABORT_ERR, &bp->state);
 				return rc;
 			}
+			/* IRQ will be initialized later in bnxt_request_irq()*/
 			bnxt_clear_int_mode(bp);
-			rc = bnxt_init_int_mode(bp);
-			if (rc) {
-				clear_bit(BNXT_STATE_FW_RESET_DET, &bp->state);
-				netdev_err(bp->dev, "init int mode failed\n");
-				return rc;
-			}
 		}
 		rc = bnxt_cancel_reservations(bp, fw_reset);
 	}

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #115 lore raw

PATCH 115/164 bnxt_en: Fix coredump logic to free allocated buffer

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shruti Parab <[email protected]>

[ Upstream commit ea9376cf68230e05492f22ca45d329f16e262c7b ]

When handling HWRM_DBG_COREDUMP_LIST FW command in bnxt_hwrm_dbg_dma_data(), the allocated buffer info->dest_buf is not freed in the error path. In the normal path, info->dest_buf is assigned to coredump->data and it will eventually be freed after the coredump is collected.

Free info->dest_buf immediately inside bnxt_hwrm_dbg_dma_data() in the error path.

Fixes c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length")

Reported-by Michael Chan <[email protected]>

Signed-off-by Shruti Parab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c | 5 +++++
 1 file changed, 5 insertions(+)

drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c +5 -0

index 4e2b938ed1f7e..651d3b1d153e0 100644
@@ -72,6 +72,11 @@ static int bnxt_hwrm_dbg_dma_data(struct bnxt *bp, void *msg,
 				memcpy(info->dest_buf + off, dma_buf, len);
 			} else {
 				rc = -ENOBUFS;
+				if (cmn_req->req_type ==
+				    cpu_to_le16(HWRM_DBG_COREDUMP_LIST)) {
+					kfree(info->dest_buf);
+					info->dest_buf = NULL;
+				}
 				break;
 			}
 		}

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #116 lore raw

PATCH 116/164 bnxt_en: Fix out-of-bound memcpy() during ethtool -w

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shruti Parab <[email protected]>

[ Upstream commit 6b87bd94f34370bbf1dfa59352bed8efab5bf419 ]

When retrieving the FW coredump using ethtool, it can sometimes cause memory corruption:

BUG: KFENCE: memory corruption in __bnxt_get_coredump+0x3ef/0x670 [bnxt_en]
Corrupted memory at 0x000000008f0f30e8 [ ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ] (in kfence-#45):
__bnxt_get_coredump+0x3ef/0x670 [bnxt_en]
ethtool_get_dump_data+0xdc/0x1a0
__dev_ethtool+0xa1e/0x1af0
dev_ethtool+0xa8/0x170
dev_ioctl+0x1b5/0x580
sock_do_ioctl+0xab/0xf0
sock_ioctl+0x1ce/0x2e0
__x64_sys_ioctl+0x87/0xc0
do_syscall_64+0x5c/0xf0
entry_SYSCALL_64_after_hwframe+0x78/0x80

...

This happens when copying the coredump segment list in bnxt_hwrm_dbg_dma_data() with the HWRM_DBG_COREDUMP_LIST FW command. The info->dest_buf buffer is allocated based on the number of coredump segments returned by the FW. The segment list is then DMA'ed by the FW and the length of the DMA is returned by FW. The driver then copies this DMA'ed segment list to info->dest_buf.

In some cases, this DMA length may exceed the info->dest_buf length and cause the above BUG condition. Fix it by capping the copy length to not exceed the length of info->dest_buf. The extra DMA data contains no useful information.

This code path is shared for the HWRM_DBG_COREDUMP_LIST and the HWRM_DBG_COREDUMP_RETRIEVE FW commands. The buffering is different for these 2 FW commands. To simplify the logic, we need to move the line to adjust the buffer length for HWRM_DBG_COREDUMP_RETRIEVE up, so that the new check to cap the copy length will work for both commands.

Fixes c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length")

Signed-off-by Shruti Parab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 .../net/ethernet/broadcom/bnxt/bnxt_coredump.c    | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c +10 -5

index 651d3b1d153e0..d80ce437435f0 100644
@@ -66,10 +66,19 @@ static int bnxt_hwrm_dbg_dma_data(struct bnxt *bp, void *msg,
 			}
 		}
 
+		if (cmn_req->req_type ==
+				cpu_to_le16(HWRM_DBG_COREDUMP_RETRIEVE))
+			info->dest_buf_size += len;
+
 		if (info->dest_buf) {
 			if ((info->seg_start + off + len) <=
 			    BNXT_COREDUMP_BUF_LEN(info->buf_len)) {
-				memcpy(info->dest_buf + off, dma_buf, len);
+				u16 copylen = min_t(u16, len,
+						    info->dest_buf_size - off);
+
+				memcpy(info->dest_buf + off, dma_buf, copylen);
+				if (copylen < len)
+					break;
 			} else {
 				rc = -ENOBUFS;
 				if (cmn_req->req_type ==

@@ -81,10 +90,6 @@ static int bnxt_hwrm_dbg_dma_data(struct bnxt *bp, void *msg,
 			}
 		}
 
-		if (cmn_req->req_type ==
-				cpu_to_le16(HWRM_DBG_COREDUMP_RETRIEVE))
-			info->dest_buf_size += len;
-
 		if (!(cmn_resp->flags & HWRM_DBG_CMN_FLAGS_MORE))
 			break;

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #117 lore raw

PATCH 117/164 bnxt_en: Fix ethtool -d byte order for 32-bit values

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michael Chan <[email protected]>

[ Upstream commit 02e8be5a032cae0f4ca33c6053c44d83cf4acc93 ]

For version 1 register dump that includes the PCIe stats, the existing code incorrectly assumes that all PCIe stats are 64-bit values. Fix it by using an array containing the starting and ending index of the 32-bit values. The loop in bnxt_get_regs() will use the array to do proper endian swap for the 32-bit values.

Fixes b5d600b027eb ("bnxt_en: Add support for 'ethtool -d'")

Reviewed-by Shruti Parab <[email protected]>

Reviewed-by Andy Gospodarek <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 .../net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 38 ++++++++++++++++---
 1 file changed, 32 insertions(+), 6 deletions(-)

drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +32 -6

index 36da52c0b9af6..54ae90526d8ff 100644
@@ -2041,6 +2041,17 @@ static int bnxt_get_regs_len(struct net_device *dev)
 	return reg_len;
 }
 
+#define BNXT_PCIE_32B_ENTRY(start, end)			\
+	 { offsetof(struct pcie_ctx_hw_stats, start),	\
+	   offsetof(struct pcie_ctx_hw_stats, end) }
+
+static const struct {
+	u16 start;
+	u16 end;
+} bnxt_pcie_32b_entries[] = {
+	BNXT_PCIE_32B_ENTRY(pcie_ltssm_histogram[0], pcie_ltssm_histogram[3]),
+};
+
 static void bnxt_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 			  void *_p)
 {

@@ -2072,12 +2083,27 @@ static void bnxt_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 	req->pcie_stat_host_addr = cpu_to_le64(hw_pcie_stats_addr);
 	rc = hwrm_req_send(bp, req);
 	if (!rc) {
-		__le64 *src = (__le64 *)hw_pcie_stats;
-		u64 *dst = (u64 *)(_p + BNXT_PXP_REG_LEN);
-		int i;
-
-		for (i = 0; i < sizeof(*hw_pcie_stats) / sizeof(__le64); i++)
-			dst[i] = le64_to_cpu(src[i]);
+		u8 *dst = (u8 *)(_p + BNXT_PXP_REG_LEN);
+		u8 *src = (u8 *)hw_pcie_stats;
+		int i, j;
+
+		for (i = 0, j = 0; i < sizeof(*hw_pcie_stats); ) {
+			if (i >= bnxt_pcie_32b_entries[j].start &&
+			    i <= bnxt_pcie_32b_entries[j].end) {
+				u32 *dst32 = (u32 *)(dst + i);
+
+				*dst32 = le32_to_cpu(*(__le32 *)(src + i));
+				i += 4;
+				if (i > bnxt_pcie_32b_entries[j].end &&
+				    j < ARRAY_SIZE(bnxt_pcie_32b_entries) - 1)
+					j++;
+			} else {
+				u64 *dst64 = (u64 *)(dst + i);
+
+				*dst64 = le64_to_cpu(*(__le64 *)(src + i));
+				i += 8;
+			}
+		}
 	}
 	hwrm_req_drop(bp, req);
 }

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #118 lore raw

PATCH 118/164 nvme-tcp: fix premature queue removal and I/O failover

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michael Liang <[email protected]>

[ Upstream commit 77e40bbce93059658aee02786a32c5c98a240a8a ]

This patch addresses a data corruption issue observed in nvme-tcp during testing.

In an NVMe native multipath setup, when an I/O timeout occurs, all inflight I/Os are canceled almost immediately after the kernel socket is shut down. These canceled I/Os are reported as host path errors, triggering a failover that succeeds on a different path.

However, at this point, the original I/O may still be outstanding in the host's network transmission path (e.g., the NIC’s TX queue). From the user-space app's perspective, the buffer associated with the I/O is considered completed since they're acked on the different path and may be reused for new I/O requests.

Because nvme-tcp enables zero-copy by default in the transmission path, this can lead to corrupted data being sent to the original target, ultimately causing data corruption.

We can reproduce this data corruption by injecting delay on one path and triggering i/o timeout.

To prevent this issue, this change ensures that all inflight transmissions are fully completed from host's perspective before returning from queue stop. To handle concurrent I/O timeout from multiple namespaces under the same controller, always wait in queue stop regardless of queue's state.

This aligns with the behavior of queue stopping in other NVMe fabric transports.

Fixes 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")

Signed-off-by Michael Liang <[email protected]>

Reviewed-by Mohamed Khalfella <[email protected]>

Reviewed-by Randy Jennings <[email protected]>

Reviewed-by Sagi Grimberg <[email protected]>

Signed-off-by Christoph Hellwig <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/nvme/host/tcp.c | 31 +++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

drivers/nvme/host/tcp.c +29 -2

index 854aa6a070ca8..4cc72be28c731 100644
@@ -1944,7 +1944,7 @@ static void __nvme_tcp_stop_queue(struct nvme_tcp_queue *queue)
 	cancel_work_sync(&queue->io_work);
 }
 
-static void nvme_tcp_stop_queue(struct nvme_ctrl *nctrl, int qid)
+static void nvme_tcp_stop_queue_nowait(struct nvme_ctrl *nctrl, int qid)
 {
 	struct nvme_tcp_ctrl *ctrl = to_tcp_ctrl(nctrl);
 	struct nvme_tcp_queue *queue = &ctrl->queues[qid];

@@ -1963,6 +1963,31 @@ static void nvme_tcp_stop_queue(struct nvme_ctrl *nctrl, int qid)
 	mutex_unlock(&queue->queue_lock);
 }
 
+static void nvme_tcp_wait_queue(struct nvme_ctrl *nctrl, int qid)
+{
+	struct nvme_tcp_ctrl *ctrl = to_tcp_ctrl(nctrl);
+	struct nvme_tcp_queue *queue = &ctrl->queues[qid];
+	int timeout = 100;
+
+	while (timeout > 0) {
+		if (!test_bit(NVME_TCP_Q_ALLOCATED, &queue->flags) ||
+		    !sk_wmem_alloc_get(queue->sock->sk))
+			return;
+		msleep(2);
+		timeout -= 2;
+	}
+	dev_warn(nctrl->device,
+		 "qid %d: timeout draining sock wmem allocation expired\n",
+		 qid);
+}
+
+static void nvme_tcp_stop_queue(struct nvme_ctrl *nctrl, int qid)
+{
+	nvme_tcp_stop_queue_nowait(nctrl, qid);
+	nvme_tcp_wait_queue(nctrl, qid);
+}
+
+
 static void nvme_tcp_setup_sock_ops(struct nvme_tcp_queue *queue)
 {
 	write_lock_bh(&queue->sock->sk->sk_callback_lock);

@@ -2030,7 +2055,9 @@ static void nvme_tcp_stop_io_queues(struct nvme_ctrl *ctrl)
 	int i;
 
 	for (i = 1; i < ctrl->queue_count; i++)
-		nvme_tcp_stop_queue(ctrl, i);
+		nvme_tcp_stop_queue_nowait(ctrl, i);
+	for (i = 1; i < ctrl->queue_count; i++)
+		nvme_tcp_wait_queue(ctrl, i);
 }
 
 static int nvme_tcp_start_io_queues(struct nvme_ctrl *ctrl,

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:04 UTC #119 lore raw

PATCH 119/164 nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alistair Francis <[email protected]>

[ Upstream commit 521987940ad4fd37fe3d0340ec6f39c4e8e91e36 ]

Ensure that TLS support is enabled in the kernel when CONFIG_NVME_TCP_TLS is enabled. Without this the code compiles, but does not actually work unless something else enables CONFIG_TLS.

Fixes be8e82caa68 ("nvme-tcp: enable TLS handshake upcall")

Signed-off-by Alistair Francis <[email protected]>

Reviewed-by Chaitanya Kulkarni <[email protected]>

Reviewed-by Hannes Reinecke <[email protected]>

Signed-off-by Christoph Hellwig <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/nvme/host/Kconfig | 1 +
 1 file changed, 1 insertion(+)

drivers/nvme/host/Kconfig +1 -0

index 486afe5981845..09ed1f61c9a85 100644
@@ -97,6 +97,7 @@ config NVME_TCP_TLS
 	depends on NVME_TCP
 	select NET_HANDSHAKE
 	select KEYS
+	select TLS
 	help
 	  Enables TLS encryption for NVMe TCP using the netlink handshake API.

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:06 UTC #120 lore raw

PATCH 120/164 nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alistair Francis <[email protected]>

[ Upstream commit ac38b7ef704c0659568fd4b2c7e6c1255fc51798 ]

Ensure that TLS support is enabled in the kernel when CONFIG_NVME_TARGET_TCP_TLS is enabled. Without this the code compiles, but does not actually work unless something else enables CONFIG_TLS.

Fixes 675b453e0241 ("nvmet-tcp: enable TLS handshake upcall")

Signed-off-by Alistair Francis <[email protected]>

Reviewed-by Hannes Reinecke <[email protected]>

Reviewed-by Chaitanya Kulkarni <[email protected]>

Signed-off-by Christoph Hellwig <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/nvme/target/Kconfig | 1 +
 1 file changed, 1 insertion(+)

drivers/nvme/target/Kconfig +1 -0

index 46be031f91b43..34438cec32b90 100644
@@ -98,6 +98,7 @@ config NVME_TARGET_TCP_TLS
 	bool "NVMe over Fabrics TCP target TLS encryption support"
 	depends on NVME_TARGET_TCP
 	select NET_HANDSHAKE
+	select TLS
 	help
 	  Enables TLS encryption for the NVMe TCP target using the netlink handshake API.

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #121 lore raw

PATCH 121/164 ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexander Stein <[email protected]>

[ Upstream commit 3cc393d2232ec770b5f79bf0673d67702a3536c3 ]

Actually check if the passed pointers are valid, before writing to them. This also fixes a USBAN warning:

UBSAN: invalid-load in ../sound/soc/fsl/imx-card.c:687:25

load of value 255 is not a valid value for type '_Bool'

This is because playback_only is uninitialized and is not written to, as the playback-only property is absent.

Fixes 844de7eebe97 ("ASoC: audio-graph-card2: expand dai_link property part")

Signed-off-by Alexander Stein <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Mark Brown <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 sound/soc/generic/simple-card-utils.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

sound/soc/generic/simple-card-utils.c +2 -2

index 975ffd2cad292..809dbb9ded365 100644
@@ -1150,9 +1150,9 @@ void graph_util_parse_link_direction(struct device_node *np,
 	bool is_playback_only = of_property_read_bool(np, "playback-only");
 	bool is_capture_only  = of_property_read_bool(np, "capture-only");
 
-	if (is_playback_only)
+	if (playback_only)
 		*playback_only = is_playback_only;
-	if (is_capture_only)
+	if (capture_only)
 		*capture_only = is_capture_only;
 }
 EXPORT_SYMBOL_GPL(graph_util_parse_link_direction);

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #122 lore raw

PATCH 122/164 bnxt_en: fix module unload sequence

Closes https://lore.kernel.org/netdev/CAMArcTWDe2cd41=ub=zzvYifaYcYv-N-csxfqxUvejy_L0D6UQ@mail.gmail.com/ open here

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vadim Fedorenko <[email protected]>

[ Upstream commit 927069d5c40c1cfa7b2d13cfc6d7d58bc6f85c50 ]

Recent updates to the PTP part of bnxt changed the way PTP FIFO is cleared, skbs waiting for TX timestamps are now cleared during ndo_close() call. To do clearing procedure, the ptp structure must exist and point to a valid address. Module destroy sequence had ptp clear code running before netdev close causing invalid memory access and kernel crash. Change the sequence to destroy ptp structure after device close.

Fixes 8f7ae5a85137 ("bnxt_en: improve TX timestamping FIFO configuration")

Reported-by Taehee Yoo <[email protected]>

Signed-off-by Vadim Fedorenko <[email protected]>

Reviewed-by Jacob Keller <[email protected]>

Reviewed-by Michael Chan <[email protected]>

Tested-by Taehee Yoo <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/net/ethernet/broadcom/bnxt/bnxt.c +1 -1

index e4d5bd30cf319..12b61a6fcda42 100644
@@ -15421,8 +15421,8 @@ static void bnxt_remove_one(struct pci_dev *pdev)
 
 	bnxt_rdma_aux_device_del(bp);
 
-	bnxt_ptp_clear(bp);
 	unregister_netdev(dev);
+	bnxt_ptp_clear(bp);
 
 	bnxt_rdma_aux_device_uninit(bp);

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:06 UTC #123 lore raw

PATCH 123/164 net: use sock_gen_put() when sk_state is TCP_TIME_WAIT

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jibin Zhang <[email protected]>

[ Upstream commit f920436a44295ca791ebb6dae3f4190142eec703 ]

It is possible for a pointer of type struct inet_timewait_sock to be returned from the functions __inet_lookup_established() and __inet6_lookup_established(). This can cause a crash when the returned pointer is of type struct inet_timewait_sock and sock_put() is called on it. The following is a crash call stack that shows sk->sk_wmem_alloc being accessed in sk_free() during the call to sock_put() on a struct inet_timewait_sock pointer. To avoid this issue, use sock_gen_put() instead of sock_put() when sk->sk_state is TCP_TIME_WAIT.

mrdump.ko        ipanic() + 120
vmlinux          notifier_call_chain(nr_to_call=-1, nr_calls=0) + 132
vmlinux          atomic_notifier_call_chain(val=0) + 56
vmlinux          panic() + 344
vmlinux          add_taint() + 164
vmlinux          end_report() + 136
vmlinux          kasan_report(size=0) + 236
vmlinux          report_tag_fault() + 16
vmlinux          do_tag_recovery() + 16
vmlinux          __do_kernel_fault() + 88
vmlinux          do_bad_area() + 28
vmlinux          do_tag_check_fault() + 60
vmlinux          do_mem_abort() + 80
vmlinux          el1_abort() + 56
vmlinux          el1h_64_sync_handler() + 124
vmlinux        > 0xFFFFFFC080011294()
vmlinux          __lse_atomic_fetch_add_release(v=0xF2FFFF82A896087C)
vmlinux          __lse_atomic_fetch_sub_release(v=0xF2FFFF82A896087C)
vmlinux          arch_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C)

+ 8
vmlinux raw_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C)
+ 8
vmlinux atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C) + 8
vmlinux __refcount_sub_and_test(i=1, r=0xF2FFFF82A896087C,
oldp=0) + 8

vmlinux          __refcount_dec_and_test(r=0xF2FFFF82A896087C, oldp=0) + 8
vmlinux          refcount_dec_and_test(r=0xF2FFFF82A896087C) + 8
vmlinux          sk_free(sk=0xF2FFFF82A8960700) + 28
vmlinux          sock_put() + 48
vmlinux          tcp6_check_fraglist_gro() + 236
vmlinux          tcp6_gro_receive() + 624
vmlinux          ipv6_gro_receive() + 912
vmlinux          dev_gro_receive() + 1116
vmlinux          napi_gro_receive() + 196
ccmni.ko         ccmni_rx_callback() + 208
ccmni.ko         ccmni_queue_recv_skb() + 388
ccci_dpmaif.ko   dpmaif_rxq_push_thread() + 1088
vmlinux          kthread() + 268
vmlinux          0xFFFFFFC08001F30C()

Fixes c9d1d23e5239 ("net: add heuristic for enabling TCP fraglist GRO")

Signed-off-by Jibin Zhang <[email protected]>

Signed-off-by Shiming Cheng <[email protected]>

Reviewed-by Jacob Keller <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 net/ipv4/tcp_offload.c   | 2 +-
 net/ipv6/tcpv6_offload.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

net/ipv4/tcp_offload.c +1 -1

index 2dfac79dc78b8..e04ebe651c334 100644
@@ -435,7 +435,7 @@ static void tcp4_check_fraglist_gro(struct list_head *head, struct sk_buff *skb,
 				       iif, sdif);
 	NAPI_GRO_CB(skb)->is_flist = !sk;
 	if (sk)
-		sock_put(sk);
+		sock_gen_put(sk);
 }
 
 INDIRECT_CALLABLE_SCOPE

net/ipv6/tcpv6_offload.c +1 -1

index ae2da28f9dfb1..5ab509a5fbdfc 100644
@@ -42,7 +42,7 @@ static void tcp6_check_fraglist_gro(struct list_head *head, struct sk_buff *skb,
 					iif, sdif);
 	NAPI_GRO_CB(skb)->is_flist = !sk;
 	if (sk)
-		sock_put(sk);
+		sock_gen_put(sk);
 #endif /* IS_ENABLED(CONFIG_IPV6) */
 }

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:06 UTC #124 lore raw

PATCH 124/164 ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sagi Maimon <[email protected]>

[ Upstream commit e98386d79a23c57cf179fe4138322e277aa3aa74 ]

On Adva boards, SMA sysfs store/get operations can call __handle_signal_outputs() or __handle_signal_inputs() while the irig and dcf pointers are uninitialized, leading to a NULL pointer dereference in __handle_signal() and causing a kernel crash. Adva boards don't use irig or dcf functionality, so add Adva-specific callbacks ptp_ocp_sma_adva_set_outputs() and ptp_ocp_sma_adva_set_inputs() that avoid invoking irig or dcf input/output routines.

Fixes ef61f5528fca ("ptp: ocp: add Adva timecard support")

Signed-off-by Sagi Maimon <[email protected]>

Reviewed-by Vadim Fedorenko <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/ptp/ptp_ocp.c | 52 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 50 insertions(+), 2 deletions(-)

drivers/ptp/ptp_ocp.c +50 -2

index 0eeb503e06c23..1a936829975e1 100644
@@ -2574,12 +2574,60 @@ static const struct ocp_sma_op ocp_fb_sma_op = {
 	.set_output	= ptp_ocp_sma_fb_set_output,
 };
 
+static int
+ptp_ocp_sma_adva_set_output(struct ptp_ocp *bp, int sma_nr, u32 val)
+{
+	u32 reg, mask, shift;
+	unsigned long flags;
+	u32 __iomem *gpio;
+
+	gpio = sma_nr > 2 ? &bp->sma_map1->gpio2 : &bp->sma_map2->gpio2;
+	shift = sma_nr & 1 ? 0 : 16;
+
+	mask = 0xffff << (16 - shift);
+
+	spin_lock_irqsave(&bp->lock, flags);
+
+	reg = ioread32(gpio);
+	reg = (reg & mask) | (val << shift);
+
+	iowrite32(reg, gpio);
+
+	spin_unlock_irqrestore(&bp->lock, flags);
+
+	return 0;
+}
+
+static int
+ptp_ocp_sma_adva_set_inputs(struct ptp_ocp *bp, int sma_nr, u32 val)
+{
+	u32 reg, mask, shift;
+	unsigned long flags;
+	u32 __iomem *gpio;
+
+	gpio = sma_nr > 2 ? &bp->sma_map2->gpio1 : &bp->sma_map1->gpio1;
+	shift = sma_nr & 1 ? 0 : 16;
+
+	mask = 0xffff << (16 - shift);
+
+	spin_lock_irqsave(&bp->lock, flags);
+
+	reg = ioread32(gpio);
+	reg = (reg & mask) | (val << shift);
+
+	iowrite32(reg, gpio);
+
+	spin_unlock_irqrestore(&bp->lock, flags);
+
+	return 0;
+}
+
 static const struct ocp_sma_op ocp_adva_sma_op = {
 	.tbl		= { ptp_ocp_adva_sma_in, ptp_ocp_adva_sma_out },
 	.init		= ptp_ocp_sma_fb_init,
 	.get		= ptp_ocp_sma_fb_get,
-	.set_inputs	= ptp_ocp_sma_fb_set_inputs,
-	.set_output	= ptp_ocp_sma_fb_set_output,
+	.set_inputs	= ptp_ocp_sma_adva_set_inputs,
+	.set_output	= ptp_ocp_sma_adva_set_output,
 };
 
 static int

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:06 UTC #125 lore raw

PATCH 125/164 net: lan743x: Fix memleak issue when GSO enabled

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thangaraj Samynathan <[email protected]>

[ Upstream commit 2d52e2e38b85c8b7bc00dca55c2499f46f8c8198 ]

Always map the skb to the LS descriptor. Previously skb was mapped to EXT descriptor when the number of fragments is zero with GSO enabled. Mapping the skb to EXT descriptor prevents it from being freed, leading to a memory leak

Fixes 23f0703c125b ("lan743x: Add main source files for new lan743x driver")

Signed-off-by Thangaraj Samynathan <[email protected]>

Reviewed-by Jacob Keller <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/microchip/lan743x_main.c | 8 ++++++--
 drivers/net/ethernet/microchip/lan743x_main.h | 1 +
 2 files changed, 7 insertions(+), 2 deletions(-)

drivers/net/ethernet/microchip/lan743x_main.c +6 -2

index 4dc5adcda6a38..547255ca1c4ef 100644
@@ -1815,6 +1815,7 @@ static void lan743x_tx_frame_add_lso(struct lan743x_tx *tx,
 	if (nr_frags <= 0) {
 		tx->frame_data0 |= TX_DESC_DATA0_LS_;
 		tx->frame_data0 |= TX_DESC_DATA0_IOC_;
+		tx->frame_last = tx->frame_first;
 	}
 	tx_descriptor = &tx->ring_cpu_ptr[tx->frame_tail];
 	tx_descriptor->data0 = cpu_to_le32(tx->frame_data0);

@@ -1884,6 +1885,7 @@ static int lan743x_tx_frame_add_fragment(struct lan743x_tx *tx,
 		tx->frame_first = 0;
 		tx->frame_data0 = 0;
 		tx->frame_tail = 0;
+		tx->frame_last = 0;
 		return -ENOMEM;
 	}

@@ -1924,16 +1926,18 @@ static void lan743x_tx_frame_end(struct lan743x_tx *tx,
 	    TX_DESC_DATA0_DTYPE_DATA_) {
 		tx->frame_data0 |= TX_DESC_DATA0_LS_;
 		tx->frame_data0 |= TX_DESC_DATA0_IOC_;
+		tx->frame_last = tx->frame_tail;
 	}
 
-	tx_descriptor = &tx->ring_cpu_ptr[tx->frame_tail];
-	buffer_info = &tx->buffer_info[tx->frame_tail];
+	tx_descriptor = &tx->ring_cpu_ptr[tx->frame_last];
+	buffer_info = &tx->buffer_info[tx->frame_last];
 	buffer_info->skb = skb;
 	if (time_stamp)
 		buffer_info->flags |= TX_BUFFER_INFO_FLAG_TIMESTAMP_REQUESTED;
 	if (ignore_sync)
 		buffer_info->flags |= TX_BUFFER_INFO_FLAG_IGNORE_SYNC;
 
+	tx_descriptor = &tx->ring_cpu_ptr[tx->frame_tail];
 	tx_descriptor->data0 = cpu_to_le32(tx->frame_data0);
 	tx->frame_tail = lan743x_tx_next_index(tx, tx->frame_tail);
 	tx->last_tail = tx->frame_tail;

drivers/net/ethernet/microchip/lan743x_main.h +1 -0

index 8ef897c114d3c..2f0cab0c85e1d 100644
@@ -980,6 +980,7 @@ struct lan743x_tx {
 	u32		frame_first;
 	u32		frame_data0;
 	u32		frame_tail;
+	u32		frame_last;
 
 	struct lan743x_tx_buffer_info *buffer_info;

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:06 UTC #126 lore raw

PATCH 126/164 net: fec: ERR007885 Workaround for conventional TX

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mattias Barthel <[email protected]>

[ Upstream commit a179aad12badc43201cbf45d1e8ed2c1383c76b9 ]

Activate TX hang workaround also in fec_enet_txq_submit_skb() when TSO is not enabled.

Errata: ERR007885

Symptoms: NETDEV WATCHDOG: eth0 (fec): transmit queue 0 timed out

commit 37d6017b84f7 ("net: fec: Workaround for imx6sx enet tx hang when enable three queues") There is a TDAR race condition for mutliQ when the software sets TDAR
and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles). This will cause the udma_tx and udma_tx_arbiter state machines to hang.

So, the Workaround is checking TDAR status four time, if TDAR cleared by
hardware and then write TDAR, otherwise don't set TDAR.

Fixes 53bb20d1faba ("net: fec: add variable reg_desc_active to speed things up")

Signed-off-by Mattias Barthel <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/freescale/fec_main.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

drivers/net/ethernet/freescale/fec_main.c +6 -1

index 2b05d9c6c21a4..04906897615d8 100644
@@ -714,7 +714,12 @@ static int fec_enet_txq_submit_skb(struct fec_enet_priv_tx_q *txq,
 	txq->bd.cur = bdp;
 
 	/* Trigger transmission start */
-	writel(0, txq->bd.reg_desc_active);
+	if (!(fep->quirks & FEC_QUIRK_ERR007885) ||
+	    !readl(txq->bd.reg_desc_active) ||
+	    !readl(txq->bd.reg_desc_active) ||
+	    !readl(txq->bd.reg_desc_active) ||
+	    !readl(txq->bd.reg_desc_active))
+		writel(0, txq->bd.reg_desc_active);
 
 	return 0;
 }

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:06 UTC #127 lore raw

PATCH 127/164 octeon_ep: Fix host hang issue during device reboot

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sathesh B Edara <[email protected]>

[ Upstream commit 34f42736b325287a7b2ce37e415838f539767bda ]

When the host loses heartbeat messages from the device, the driver calls the device-specific ndo_stop function, which frees the resources. If the driver is unloaded in this scenario, it calls ndo_stop again, attempting to free resources that have already been freed, leading to a host hang issue. To resolve this, dev_close should be called instead of the device-specific stop function.dev_close internally calls ndo_stop to stop the network interface and performs additional cleanup tasks. During the driver unload process, if the device is already down, ndo_stop is not called.

Fixes 5cb96c29aa0e ("octeon_ep: add heartbeat monitor")

Signed-off-by Sathesh B Edara <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/marvell/octeon_ep/octep_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/net/ethernet/marvell/octeon_ep/octep_main.c +1 -1

index a89f80bac39b8..1b2f5cae06449 100644
@@ -1184,7 +1184,7 @@ static void octep_hb_timeout_task(struct work_struct *work)
 		miss_cnt);
 	rtnl_lock();
 	if (netif_running(oct->netdev))
-		octep_stop(oct->netdev);
+		dev_close(oct->netdev);
 	rtnl_unlock();
 }

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:06 UTC #128 lore raw

PATCH 128/164 net: hns3: store rx VLAN tag offload state for VF

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jian Shen <[email protected]>

[ Upstream commit ef2383d078edcbe3055032436b16cdf206f26de2 ]

The VF driver missed to store the rx VLAN tag strip state when user change the rx VLAN tag offload state. And it will default to enable the rx vlan tag strip when re-init VF device after reset. So if user disable rx VLAN tag offload, and trig reset, then the HW will still strip the VLAN tag from packet nad fill into RX BD, but the VF driver will ignore it for rx VLAN tag offload disabled. It may cause the rx VLAN tag dropped.

Fixes b2641e2ad456 ("net: hns3: Add support of hardware rx-vlan-offload to HNS3 VF driver")

Signed-off-by Jian Shen <[email protected]>

Signed-off-by Jijie Shao <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 .../hisilicon/hns3/hns3vf/hclgevf_main.c      | 25 ++++++++++++++-----
 .../hisilicon/hns3/hns3vf/hclgevf_main.h      |  1 +
 2 files changed, 20 insertions(+), 6 deletions(-)

drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +19 -6

index fd5992164846b..8f5a85b97ac0c 100644
@@ -1294,9 +1294,8 @@ static void hclgevf_sync_vlan_filter(struct hclgevf_dev *hdev)
 	rtnl_unlock();
 }
 
-static int hclgevf_en_hw_strip_rxvtag(struct hnae3_handle *handle, bool enable)
+static int hclgevf_en_hw_strip_rxvtag_cmd(struct hclgevf_dev *hdev, bool enable)
 {
-	struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
 	struct hclge_vf_to_pf_msg send_msg;
 
 	hclgevf_build_send_msg(&send_msg, HCLGE_MBX_SET_VLAN,

@@ -1305,6 +1304,19 @@ static int hclgevf_en_hw_strip_rxvtag(struct hnae3_handle *handle, bool enable)
 	return hclgevf_send_mbx_msg(hdev, &send_msg, false, NULL, 0);
 }
 
+static int hclgevf_en_hw_strip_rxvtag(struct hnae3_handle *handle, bool enable)
+{
+	struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
+	int ret;
+
+	ret = hclgevf_en_hw_strip_rxvtag_cmd(hdev, enable);
+	if (ret)
+		return ret;
+
+	hdev->rxvtag_strip_en = enable;
+	return 0;
+}
+
 static int hclgevf_reset_tqp(struct hnae3_handle *handle)
 {
 #define HCLGEVF_RESET_ALL_QUEUE_DONE	1U

@@ -2206,12 +2218,13 @@ static int hclgevf_rss_init_hw(struct hclgevf_dev *hdev)
 					  tc_valid, tc_size);
 }
 
-static int hclgevf_init_vlan_config(struct hclgevf_dev *hdev)
+static int hclgevf_init_vlan_config(struct hclgevf_dev *hdev,
+				    bool rxvtag_strip_en)
 {
 	struct hnae3_handle *nic = &hdev->nic;
 	int ret;
 
-	ret = hclgevf_en_hw_strip_rxvtag(nic, true);
+	ret = hclgevf_en_hw_strip_rxvtag(nic, rxvtag_strip_en);
 	if (ret) {
 		dev_err(&hdev->pdev->dev,
 			"failed to enable rx vlan offload, ret = %d\n", ret);

@@ -2881,7 +2894,7 @@ static int hclgevf_reset_hdev(struct hclgevf_dev *hdev)
 	if (ret)
 		return ret;
 
-	ret = hclgevf_init_vlan_config(hdev);
+	ret = hclgevf_init_vlan_config(hdev, hdev->rxvtag_strip_en);
 	if (ret) {
 		dev_err(&hdev->pdev->dev,
 			"failed(%d) to initialize VLAN config\n", ret);

@@ -2996,7 +3009,7 @@ static int hclgevf_init_hdev(struct hclgevf_dev *hdev)
 		goto err_config;
 	}
 
-	ret = hclgevf_init_vlan_config(hdev);
+	ret = hclgevf_init_vlan_config(hdev, true);
 	if (ret) {
 		dev_err(&hdev->pdev->dev,
 			"failed(%d) to initialize VLAN config\n", ret);

drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h +1 -0

index cccef32284616..0208425ab594f 100644
@@ -253,6 +253,7 @@ struct hclgevf_dev {
 	int *vector_irq;
 
 	bool gro_en;
+	bool rxvtag_strip_en;
 
 	unsigned long vlan_del_fail_bmap[BITS_TO_LONGS(VLAN_N_VID)];

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:06 UTC #129 lore raw

PATCH 129/164 net: hns3: fix an interrupt residual problem

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yonglong Liu <[email protected]>

[ Upstream commit 8e6b9c6ea5a55045eed6526d8ee49e93192d1a58 ]

When a VF is passthrough to a VM, and the VM is killed, the reported interrupt may not been handled, it will remain, and won't be clear by the nic engine even with a flr or tqp reset. When the VM restart, the interrupt of the first vector may be dropped by the second enable_irq in vfio, see the issue below:
https://gitlab.com/qemu-project/qemu/-/issues/2884#note_2423361621

We notice that the vfio has always behaved this way, and the interrupt is a residue of the nic engine, so we fix the problem by moving the vector enable process out of the enable_irq loop.

Fixes 08a100689d4b ("net: hns3: re-organize vector handle")

Signed-off-by Yonglong Liu <[email protected]>

Signed-off-by Jijie Shao <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 .../net/ethernet/hisilicon/hns3/hns3_enet.c   | 82 +++++++++----------
 1 file changed, 39 insertions(+), 43 deletions(-)

drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +39 ~~-43~~

index dc60ac3bde7f2..24062a40a7793 100644
@@ -473,20 +473,14 @@ static void hns3_mask_vector_irq(struct hns3_enet_tqp_vector *tqp_vector,
 	writel(mask_en, tqp_vector->mask_addr);
 }
 
-static void hns3_vector_enable(struct hns3_enet_tqp_vector *tqp_vector)
+static void hns3_irq_enable(struct hns3_enet_tqp_vector *tqp_vector)
 {
 	napi_enable(&tqp_vector->napi);
 	enable_irq(tqp_vector->vector_irq);
-
-	/* enable vector */
-	hns3_mask_vector_irq(tqp_vector, 1);
 }
 
-static void hns3_vector_disable(struct hns3_enet_tqp_vector *tqp_vector)
+static void hns3_irq_disable(struct hns3_enet_tqp_vector *tqp_vector)
 {
-	/* disable vector */
-	hns3_mask_vector_irq(tqp_vector, 0);
-
 	disable_irq(tqp_vector->vector_irq);
 	napi_disable(&tqp_vector->napi);
 	cancel_work_sync(&tqp_vector->rx_group.dim.work);

@@ -707,11 +701,42 @@ static int hns3_set_rx_cpu_rmap(struct net_device *netdev)
 	return 0;
 }
 
+static void hns3_enable_irqs_and_tqps(struct net_device *netdev)
+{
+	struct hns3_nic_priv *priv = netdev_priv(netdev);
+	struct hnae3_handle *h = priv->ae_handle;
+	u16 i;
+
+	for (i = 0; i < priv->vector_num; i++)
+		hns3_irq_enable(&priv->tqp_vector[i]);
+
+	for (i = 0; i < priv->vector_num; i++)
+		hns3_mask_vector_irq(&priv->tqp_vector[i], 1);
+
+	for (i = 0; i < h->kinfo.num_tqps; i++)
+		hns3_tqp_enable(h->kinfo.tqp[i]);
+}
+
+static void hns3_disable_irqs_and_tqps(struct net_device *netdev)
+{
+	struct hns3_nic_priv *priv = netdev_priv(netdev);
+	struct hnae3_handle *h = priv->ae_handle;
+	u16 i;
+
+	for (i = 0; i < h->kinfo.num_tqps; i++)
+		hns3_tqp_disable(h->kinfo.tqp[i]);
+
+	for (i = 0; i < priv->vector_num; i++)
+		hns3_mask_vector_irq(&priv->tqp_vector[i], 0);
+
+	for (i = 0; i < priv->vector_num; i++)
+		hns3_irq_disable(&priv->tqp_vector[i]);
+}
+
 static int hns3_nic_net_up(struct net_device *netdev)
 {
 	struct hns3_nic_priv *priv = netdev_priv(netdev);
 	struct hnae3_handle *h = priv->ae_handle;
-	int i, j;
 	int ret;
 
 	ret = hns3_nic_reset_all_ring(h);

@@ -720,23 +745,13 @@ static int hns3_nic_net_up(struct net_device *netdev)
 
 	clear_bit(HNS3_NIC_STATE_DOWN, &priv->state);
 
-	/* enable the vectors */
-	for (i = 0; i < priv->vector_num; i++)
-		hns3_vector_enable(&priv->tqp_vector[i]);
-
-	/* enable rcb */
-	for (j = 0; j < h->kinfo.num_tqps; j++)
-		hns3_tqp_enable(h->kinfo.tqp[j]);
+	hns3_enable_irqs_and_tqps(netdev);
 
 	/* start the ae_dev */
 	ret = h->ae_algo->ops->start ? h->ae_algo->ops->start(h) : 0;
 	if (ret) {
 		set_bit(HNS3_NIC_STATE_DOWN, &priv->state);
-		while (j--)
-			hns3_tqp_disable(h->kinfo.tqp[j]);
-
-		for (j = i - 1; j >= 0; j--)
-			hns3_vector_disable(&priv->tqp_vector[j]);
+		hns3_disable_irqs_and_tqps(netdev);
 	}
 
 	return ret;

@@ -823,17 +838,9 @@ static void hns3_reset_tx_queue(struct hnae3_handle *h)
 static void hns3_nic_net_down(struct net_device *netdev)
 {
 	struct hns3_nic_priv *priv = netdev_priv(netdev);
-	struct hnae3_handle *h = hns3_get_handle(netdev);
 	const struct hnae3_ae_ops *ops;
-	int i;
 
-	/* disable vectors */
-	for (i = 0; i < priv->vector_num; i++)
-		hns3_vector_disable(&priv->tqp_vector[i]);
-
-	/* disable rcb */
-	for (i = 0; i < h->kinfo.num_tqps; i++)
-		hns3_tqp_disable(h->kinfo.tqp[i]);
+	hns3_disable_irqs_and_tqps(netdev);
 
 	/* stop ae_dev */
 	ops = priv->ae_handle->ae_algo->ops;

@@ -5864,8 +5871,6 @@ int hns3_set_channels(struct net_device *netdev,
 void hns3_external_lb_prepare(struct net_device *ndev, bool if_running)
 {
 	struct hns3_nic_priv *priv = netdev_priv(ndev);
-	struct hnae3_handle *h = priv->ae_handle;
-	int i;
 
 	if (!if_running)
 		return;

@@ -5876,11 +5881,7 @@ void hns3_external_lb_prepare(struct net_device *ndev, bool if_running)
 	netif_carrier_off(ndev);
 	netif_tx_disable(ndev);
 
-	for (i = 0; i < priv->vector_num; i++)
-		hns3_vector_disable(&priv->tqp_vector[i]);
-
-	for (i = 0; i < h->kinfo.num_tqps; i++)
-		hns3_tqp_disable(h->kinfo.tqp[i]);
+	hns3_disable_irqs_and_tqps(ndev);
 
 	/* delay ring buffer clearing to hns3_reset_notify_uninit_enet
 	 * during reset process, because driver may not be able

@@ -5896,7 +5897,6 @@ void hns3_external_lb_restore(struct net_device *ndev, bool if_running)
 {
 	struct hns3_nic_priv *priv = netdev_priv(ndev);
 	struct hnae3_handle *h = priv->ae_handle;
-	int i;
 
 	if (!if_running)
 		return;

@@ -5912,11 +5912,7 @@ void hns3_external_lb_restore(struct net_device *ndev, bool if_running)
 
 	clear_bit(HNS3_NIC_STATE_DOWN, &priv->state);
 
-	for (i = 0; i < priv->vector_num; i++)
-		hns3_vector_enable(&priv->tqp_vector[i]);
-
-	for (i = 0; i < h->kinfo.num_tqps; i++)
-		hns3_tqp_enable(h->kinfo.tqp[i]);
+	hns3_enable_irqs_and_tqps(ndev);
 
 	netif_tx_wake_all_queues(ndev);

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #130 lore raw

PATCH 130/164 net: hns3: fixed debugfs tm_qset size

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hao Lan <[email protected]>

[ Upstream commit e317aebeefcb3b0c71f2305af3c22871ca6b3833 ]

The size of the tm_qset file of debugfs is limited to 64 KB, which is too small in the scenario with 1280 qsets. The size needs to be expanded to 1 MB.

Fixes 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")

Signed-off-by Hao Lan <[email protected]>

Signed-off-by Peiyang Wang <[email protected]>

Signed-off-by Jijie Shao <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c +1 -1

index 9bbece25552b1..3d70c97a0bedf 100644
@@ -60,7 +60,7 @@ static struct hns3_dbg_cmd_info hns3_dbg_cmd[] = {
 		.name = "tm_qset",
 		.cmd = HNAE3_DBG_CMD_TM_QSET,
 		.dentry = HNS3_DBG_DENTRY_TM,
-		.buf_len = HNS3_DBG_READ_LEN,
+		.buf_len = HNS3_DBG_READ_LEN_1MB,
 		.init = hns3_dbg_common_file_init,
 	},
 	{

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #131 lore raw

PATCH 131/164 net: hns3: defer calling ptp_clock_register()

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jian Shen <[email protected]>

[ Upstream commit 4971394d9d624f91689d766f31ce668d169d9959 ]

Currently the ptp_clock_register() is called before relative ptp resource ready. It may cause unexpected result when upper layer called the ptp API during the timewindow. Fix it by moving the ptp_clock_register() to the function end.

Fixes 0bf5eb788512 ("net: hns3: add support for PTP")

Signed-off-by Jian Shen <[email protected]>

Signed-off-by Jijie Shao <[email protected]>

Reviewed-by Vadim Fedorenko <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c  | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c +7 -6

index 181af419b878d..0ffda5146bae5 100644
@@ -439,6 +439,13 @@ static int hclge_ptp_create_clock(struct hclge_dev *hdev)
 	ptp->info.settime64 = hclge_ptp_settime;
 
 	ptp->info.n_alarm = 0;
+
+	spin_lock_init(&ptp->lock);
+	ptp->io_base = hdev->hw.hw.io_base + HCLGE_PTP_REG_OFFSET;
+	ptp->ts_cfg.rx_filter = HWTSTAMP_FILTER_NONE;
+	ptp->ts_cfg.tx_type = HWTSTAMP_TX_OFF;
+	hdev->ptp = ptp;
+
 	ptp->clock = ptp_clock_register(&ptp->info, &hdev->pdev->dev);
 	if (IS_ERR(ptp->clock)) {
 		dev_err(&hdev->pdev->dev,

@@ -450,12 +457,6 @@ static int hclge_ptp_create_clock(struct hclge_dev *hdev)
 		return -ENODEV;
 	}
 
-	spin_lock_init(&ptp->lock);
-	ptp->io_base = hdev->hw.hw.io_base + HCLGE_PTP_REG_OFFSET;
-	ptp->ts_cfg.rx_filter = HWTSTAMP_FILTER_NONE;
-	ptp->ts_cfg.tx_type = HWTSTAMP_TX_OFF;
-	hdev->ptp = ptp;
-
 	return 0;
 }

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #132 lore raw

PATCH 132/164 net: vertexcom: mse102x: Fix possible stuck of SPI interrupt

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefan Wahren <[email protected]>

[ Upstream commit 55f362885951b2d00fd7fbb02ef0227deea572c2 ]

The MSE102x doesn't provide any SPI commands for interrupt handling. So in case the interrupt fired before the driver requests the IRQ, the interrupt will never fire again. In order to fix this always poll for pending packets after opening the interface.

Fixes 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/vertexcom/mse102x.c | 8 ++++++++
 1 file changed, 8 insertions(+)

drivers/net/ethernet/vertexcom/mse102x.c +8 -0

index 89dc4c401a8de..92ebf16331598 100644
@@ -509,6 +509,7 @@ static irqreturn_t mse102x_irq(int irq, void *_mse)
 static int mse102x_net_open(struct net_device *ndev)
 {
 	struct mse102x_net *mse = netdev_priv(ndev);
+	struct mse102x_net_spi *mses = to_mse102x_spi(mse);
 	int ret;
 
 	ret = request_threaded_irq(ndev->irq, NULL, mse102x_irq, IRQF_ONESHOT,

@@ -524,6 +525,13 @@ static int mse102x_net_open(struct net_device *ndev)
 
 	netif_carrier_on(ndev);
 
+	/* The SPI interrupt can stuck in case of pending packet(s).
+	 * So poll for possible packet(s) to re-arm the interrupt.
+	 */
+	mutex_lock(&mses->lock);
+	mse102x_rx_pkt_spi(mse);
+	mutex_unlock(&mses->lock);
+
 	netif_dbg(mse, ifup, ndev, "network device up\n");
 
 	return 0;

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #133 lore raw

PATCH 133/164 net: vertexcom: mse102x: Fix LEN_MASK

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefan Wahren <[email protected]>

[ Upstream commit 74987089ec678b4018dba0a609e9f4bf6ef7f4ad ]

The LEN_MASK for CMD_RTS doesn't cover the whole parameter mask. The Bit 11 is reserved, so adjust LEN_MASK accordingly.

Fixes 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/vertexcom/mse102x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/net/ethernet/vertexcom/mse102x.c +1 -1

index 92ebf16331598..3edf2c3753f0e 100644
@@ -33,7 +33,7 @@
 #define CMD_CTR		(0x2 << CMD_SHIFT)
 
 #define CMD_MASK	GENMASK(15, CMD_SHIFT)
-#define LEN_MASK	GENMASK(CMD_SHIFT - 1, 0)
+#define LEN_MASK	GENMASK(CMD_SHIFT - 2, 0)
 
 #define DET_CMD_LEN	4
 #define DET_SOF_LEN	2

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #134 lore raw

PATCH 134/164 net: vertexcom: mse102x: Add range check for CMD_RTS

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefan Wahren <[email protected]>

[ Upstream commit d4dda902dac194e3231a1ed0f76c6c3b6340ba8a ]

Since there is no protection in the SPI protocol against electrical interferences, the driver shouldn't blindly trust the length payload of CMD_RTS. So introduce a bounds check for incoming frames.

Fixes 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/vertexcom/mse102x.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

drivers/net/ethernet/vertexcom/mse102x.c +4 -2

index 3edf2c3753f0e..2c06d1d05164f 100644
@@ -6,6 +6,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/if_vlan.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/kernel.h>

@@ -337,8 +338,9 @@ static void mse102x_rx_pkt_spi(struct mse102x_net *mse)
 	}
 
 	rxlen = cmd_resp & LEN_MASK;
-	if (!rxlen) {
-		net_dbg_ratelimited("%s: No frame length defined\n", __func__);
+	if (rxlen < ETH_ZLEN || rxlen > VLAN_ETH_FRAME_LEN) {
+		net_dbg_ratelimited("%s: Invalid frame length: %d\n", __func__,
+				    rxlen);
 		mse->stats.invalid_len++;
 		return;
 	}

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #135 lore raw

PATCH 135/164 net: vertexcom: mse102x: Fix RX error handling

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefan Wahren <[email protected]>

[ Upstream commit ee512922ddd7d64afe2b28830a88f19063217649 ]

In case the CMD_RTS got corrupted by interferences, the MSE102x doesn't allow a retransmission of the command. Instead the Ethernet frame must be shifted out of the SPI FIFO. Since the actual length is unknown, assume the maximum possible value.

Fixes 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/vertexcom/mse102x.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

drivers/net/ethernet/vertexcom/mse102x.c +16 -4

index 2c06d1d05164f..e4d993f313740 100644
@@ -263,7 +263,7 @@ static int mse102x_tx_frame_spi(struct mse102x_net *mse, struct sk_buff *txp,
 }
 
 static int mse102x_rx_frame_spi(struct mse102x_net *mse, u8 *buff,
-				unsigned int frame_len)
+				unsigned int frame_len, bool drop)
 {
 	struct mse102x_net_spi *mses = to_mse102x_spi(mse);
 	struct spi_transfer *xfer = &mses->spi_xfer;

@@ -281,6 +281,9 @@ static int mse102x_rx_frame_spi(struct mse102x_net *mse, u8 *buff,
 		netdev_err(mse->ndev, "%s: spi_sync() failed: %d\n",
 			   __func__, ret);
 		mse->stats.xfer_err++;
+	} else if (drop) {
+		netdev_dbg(mse->ndev, "%s: Drop frame\n", __func__);
+		ret = -EINVAL;
 	} else if (*sof != cpu_to_be16(DET_SOF)) {
 		netdev_dbg(mse->ndev, "%s: SPI start of frame is invalid (0x%04x)\n",
 			   __func__, *sof);

@@ -308,6 +311,7 @@ static void mse102x_rx_pkt_spi(struct mse102x_net *mse)
 	struct sk_buff *skb;
 	unsigned int rxalign;
 	unsigned int rxlen;
+	bool drop = false;
 	__be16 rx = 0;
 	u16 cmd_resp;
 	u8 *rxpkt;

@@ -330,7 +334,8 @@ static void mse102x_rx_pkt_spi(struct mse102x_net *mse)
 			net_dbg_ratelimited("%s: Unexpected response (0x%04x)\n",
 					    __func__, cmd_resp);
 			mse->stats.invalid_rts++;
-			return;
+			drop = true;
+			goto drop;
 		}
 
 		net_dbg_ratelimited("%s: Unexpected response to first CMD\n",

@@ -342,9 +347,16 @@ static void mse102x_rx_pkt_spi(struct mse102x_net *mse)
 		net_dbg_ratelimited("%s: Invalid frame length: %d\n", __func__,
 				    rxlen);
 		mse->stats.invalid_len++;
-		return;
+		drop = true;
 	}
 
+	/* In case of a invalid CMD_RTS, the frame must be consumed anyway.
+	 * So assume the maximum possible frame length.
+	 */
+drop:
+	if (drop)
+		rxlen = VLAN_ETH_FRAME_LEN;
+
 	rxalign = ALIGN(rxlen + DET_SOF_LEN + DET_DFT_LEN, 4);
 	skb = netdev_alloc_skb_ip_align(mse->ndev, rxalign);
 	if (!skb)

@@ -355,7 +367,7 @@ static void mse102x_rx_pkt_spi(struct mse102x_net *mse)
 	 * They are copied, but ignored.
 	 */
 	rxpkt = skb_put(skb, rxlen) - DET_SOF_LEN;
-	if (mse102x_rx_frame_spi(mse, rxpkt, rxlen)) {
+	if (mse102x_rx_frame_spi(mse, rxpkt, rxlen, drop)) {
 		mse->ndev->stats.rx_errors++;
 		dev_kfree_skb(skb);
 		return;

Signature · 1 line

2.39.5

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #136 lore raw

PATCH 136/164 blk-mq: create correct map for fallback case

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Wagner <[email protected]>

commit a9ae6fe1c319c4776c2b11e85e15109cd3f04076 upstream.

The fallback code in blk_mq_map_hw_queues is original from blk_mq_pci_map_queues and was added to handle the case where pci_irq_get_affinity will return NULL for !SMP configuration.

blk_mq_map_hw_queues replaces besides blk_mq_pci_map_queues also blk_mq_virtio_map_queues which used to use blk_mq_map_queues for the fallback.

It's possible to use blk_mq_map_queues for both cases though. blk_mq_map_queues creates the same map as blk_mq_clear_mq_map for !SMP that is CPU 0 will be mapped to hctx 0.

The WARN_ON_ONCE has to be dropped for virtio as the fallback is also taken for certain configuration on default. Though there is still a WARN_ON_ONCE check in lib/group_cpus.c:

       WARN_ON(nr_present + nr_others < numgrps);

which will trigger if the caller tries to create more hardware queues than CPUs. It tests the same as the WARN_ON_ONCE in blk_mq_pci_map_queues did.

Fixes a5665c3d150c ("virtio: blk/scsi: replace blk_mq_virtio_map_queues with blk_mq_map_hw_queues")

Reported-by Steven Rostedt <[email protected]>

Closes https://lore.kernel.org/all/[email protected]/ open here

Signed-off-by Daniel Wagner <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Jens Axboe <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 block/blk-mq-cpumap.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

block/blk-mq-cpumap.c +1 -2

@@ -87,7 +87,6 @@ void blk_mq_map_hw_queues(struct blk_mq_
 	return;
 
 fallback:
-	WARN_ON_ONCE(qmap->nr_queues > 1);
-	blk_mq_clear_mq_map(qmap);
+	blk_mq_map_queues(qmap);
 }
 EXPORT_SYMBOL_GPL(blk_mq_map_hw_queues);

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #137 lore raw

PATCH 137/164 mm, slab: clean up slab->obj_exts always

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zhenhua Huang <[email protected]>

commit be8250786ca94952a19ce87f98ad9906448bc9ef upstream.

When memory allocation profiling is disabled at runtime or due to an error, shutdown_mem_profiling() is called: slab->obj_exts which previously allocated remains.
It won't be cleared by unaccount_slab() because of mem_alloc_profiling_enabled() not true. It's incorrect, slab->obj_exts should always be cleaned up in unaccount_slab() to avoid following error:

[...]BUG: Bad page state in process...
..
[...]page dumped because: page still charged to cgroup

[[email protected]: fold need_slab_obj_ext() into its only user]

Fixes 21c690a349ba ("mm: introduce slabobj_ext to support slab object extensions")

Signed-off-by Zhenhua Huang <[email protected]>

Acked-by David Rientjes <[email protected]>

Acked-by Harry Yoo <[email protected]>

Tested-by Harry Yoo <[email protected]>

Acked-by Suren Baghdasaryan <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Vlastimil Babka <[email protected]>

[surenb: fixed trivial merge conflict in alloc_tagging_slab_alloc_hook(), skipped inlining free_slab_obj_exts() as it's already inline in 6.12]

Signed-off-by Suren Baghdasaryan <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 mm/slub.c |   27 +++++++--------------------
 1 file changed, 7 insertions(+), 20 deletions(-)

mm/slub.c +7 ~~-20~~

@@ -2035,18 +2035,6 @@ static inline void free_slab_obj_exts(st
 	slab->obj_exts = 0;
 }
 
-static inline bool need_slab_obj_ext(void)
-{
-	if (mem_alloc_profiling_enabled())
-		return true;
-
-	/*
-	 * CONFIG_MEMCG creates vector of obj_cgroup objects conditionally
-	 * inside memcg_slab_post_alloc_hook. No other users for now.
-	 */
-	return false;
-}
-
 #else /* CONFIG_SLAB_OBJ_EXT */
 
 static inline void init_slab_obj_exts(struct slab *slab)

@@ -2063,11 +2051,6 @@ static inline void free_slab_obj_exts(st
 {
 }
 
-static inline bool need_slab_obj_ext(void)
-{
-	return false;
-}
-
 #endif /* CONFIG_SLAB_OBJ_EXT */
 
 #ifdef CONFIG_MEM_ALLOC_PROFILING

@@ -2099,7 +2082,7 @@ prepare_slab_obj_exts_hook(struct kmem_c
 static inline void
 alloc_tagging_slab_alloc_hook(struct kmem_cache *s, void *object, gfp_t flags)
 {
-	if (need_slab_obj_ext()) {
+	if (mem_alloc_profiling_enabled()) {
 		struct slabobj_ext *obj_exts;
 
 		obj_exts = prepare_slab_obj_exts_hook(s, flags, object);

@@ -2577,8 +2560,12 @@ static __always_inline void account_slab
 static __always_inline void unaccount_slab(struct slab *slab, int order,
 					   struct kmem_cache *s)
 {
-	if (memcg_kmem_online() || need_slab_obj_ext())
-		free_slab_obj_exts(slab);
+	/*
+	 * The slab object extensions should now be freed regardless of
+	 * whether mem_alloc_profiling_enabled() or not because profiling
+	 * might have been disabled after slab->obj_exts got allocated.
+	 */
+	free_slab_obj_exts(slab);
 
 	mod_node_page_state(slab_pgdat(slab), cache_vmstat_idx(s),
 			    -(PAGE_SIZE << order));

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #138 lore raw

PATCH 138/164 bcachefs: Remove incorrect __counted_by annotation

[1] https://lore.kernel.org/lkml/Zv8VDKWN1GzLRT-_@archlinux/T/#m0ce9541c5070146320efd4f928cc1ff8de69e9b2
[2] https://privatebin.net/?a0d4e97d590d71e1#9bLmp2Kb5NU6X6cZEucchDcu88HzUQwHUah8okKPReEt

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alan Huang <[email protected]>

commit 6846100b00d97d3d6f05766ae86a0d821d849e78 upstream.

This actually reverts 86e92eeeb237 ("bcachefs: Annotate struct bch_xattr with __counted_by()").

After the x_name, there is a value. According to the disscussion[1], __counted_by assumes that the flexible array member contains exactly the amount of elements that are specified. Now there are users came across a false positive detection of an out of bounds write caused by the __counted_by here[2], so revert that.

Signed-off-by Alan Huang <[email protected]>

Signed-off-by Kent Overstreet <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/bcachefs/xattr_format.h |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

fs/bcachefs/xattr_format.h +7 -1

@@ -13,7 +13,13 @@ struct bch_xattr {
 	__u8			x_type;
 	__u8			x_name_len;
 	__le16			x_val_len;
-	__u8			x_name[] __counted_by(x_name_len);
+	/*
+	 * x_name contains the name and value counted by
+	 * x_name_len + x_val_len. The introduction of
+	 * __counted_by(x_name_len) caused a false positive
+	 * detection of an out of bounds write.
+	 */
+	__u8			x_name[];
 } __packed __aligned(8);
 
 #endif /* _BCACHEFS_XATTR_FORMAT_H */

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #139 lore raw

PATCH 139/164 net: Fix the devmem sock opts and msgs for parisc

[1]
https://lore.kernel.org/lkml/[email protected]/

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pranjal Shrivastava <[email protected]>

commit fd87b7783802b45cdd261b273e6b2b792823064d upstream.

The devmem socket options and socket control message definitions introduced in the TCP devmem series[1] incorrectly continued the socket definitions for arch/parisc.

The UAPI change seems safe as there are currently no drivers that declare support for devmem TCP RX via PP_FLAG_ALLOW_UNREADABLE_NETMEM. Hence, fixing this UAPI should be safe.

Fix the devmem socket options and socket control message definitions to reflect the series followed by arch/parisc.

Fixes 8f0b3cc9a4c10 ("tcp: RX path for devmem TCP")

Signed-off-by Pranjal Shrivastava <[email protected]>

Reviewed-by Willem de Bruijn <[email protected]>

Reviewed-by Jason Xing <[email protected]>

Reviewed-by Mina Almasry <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Pranjal Shrivastava <[email protected]>

Signed-off-by Helge Deller <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/parisc/include/uapi/asm/socket.h |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

arch/parisc/include/uapi/asm/socket.h +7 -3

@@ -132,11 +132,15 @@
 #define SO_PASSPIDFD		0x404A
 #define SO_PEERPIDFD		0x404B
 
-#define SO_DEVMEM_LINEAR	78
+#define SCM_TS_OPT_ID		0x404C
+
+#define SO_RCVPRIORITY		0x404D
+
+#define SO_DEVMEM_LINEAR	0x404E
 #define SCM_DEVMEM_LINEAR	SO_DEVMEM_LINEAR
-#define SO_DEVMEM_DMABUF	79
+#define SO_DEVMEM_DMABUF	0x404F
 #define SCM_DEVMEM_DMABUF	SO_DEVMEM_DMABUF
-#define SO_DEVMEM_DONTNEED	80
+#define SO_DEVMEM_DONTNEED	0x4050
 
 #if !defined(__KERNEL__)

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #140 lore raw

PATCH 140/164 accel/ivpu: Make DB_ID and JOB_ID allocations incremental

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tomasz Rusinowicz <[email protected]>

commit c3b0ec0fe0c7ebc4eb42ba60f7340ecdb7aae1a2 upstream.

Save last used ID and use it to limit the possible values for the ID. This should decrease the rate at which the IDs are reused, which will make debugging easier.

Signed-off-by Tomasz Rusinowicz <[email protected]>

Link https://patchwork.freedesktop.org/patch/msgid/[email protected]

Reviewed-by Jeffrey Hugo <[email protected]>

Signed-off-by Jacek Lawrynowicz <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/accel/ivpu/ivpu_drv.c |    9 +++++++++
 drivers/accel/ivpu/ivpu_drv.h |    7 +++++++
 drivers/accel/ivpu/ivpu_job.c |   37 +++++++++++++++++++++++++++----------
 3 files changed, 43 insertions(+), 10 deletions(-)

drivers/accel/ivpu/ivpu_drv.c +9 -0

@@ -260,6 +260,11 @@ static int ivpu_open(struct drm_device *
 	if (ret)
 		goto err_xa_erase;
 
+	file_priv->default_job_limit.min = FIELD_PREP(IVPU_JOB_ID_CONTEXT_MASK,
+						      (file_priv->ctx.id - 1));
+	file_priv->default_job_limit.max = file_priv->default_job_limit.min | IVPU_JOB_ID_JOB_MASK;
+	file_priv->job_limit = file_priv->default_job_limit;
+
 	mutex_unlock(&vdev->context_list_lock);
 	drm_dev_exit(idx);

@@ -607,6 +612,10 @@ static int ivpu_dev_init(struct ivpu_dev
 	lockdep_set_class(&vdev->submitted_jobs_xa.xa_lock, &submitted_jobs_xa_lock_class_key);
 	INIT_LIST_HEAD(&vdev->bo_list);
 
+	vdev->default_db_limit.min = IVPU_MIN_DB;
+	vdev->default_db_limit.max = IVPU_MAX_DB;
+	vdev->db_limit = vdev->default_db_limit;
+
 	ret = drmm_mutex_init(&vdev->drm, &vdev->context_list_lock);
 	if (ret)
 		goto err_xa_destroy;

drivers/accel/ivpu/ivpu_drv.h +7 -0

@@ -46,6 +46,9 @@
 #define IVPU_MIN_DB 1
 #define IVPU_MAX_DB 255
 
+#define IVPU_JOB_ID_JOB_MASK		GENMASK(7, 0)
+#define IVPU_JOB_ID_CONTEXT_MASK	GENMASK(31, 8)
+
 #define IVPU_NUM_ENGINES       2
 #define IVPU_NUM_PRIORITIES    4
 #define IVPU_NUM_CMDQS_PER_CTX (IVPU_NUM_ENGINES * IVPU_NUM_PRIORITIES)

@@ -136,6 +139,8 @@ struct ivpu_device {
 	struct xa_limit context_xa_limit;
 
 	struct xarray db_xa;
+	struct xa_limit db_limit;
+	struct xa_limit default_db_limit;
 
 	struct mutex bo_list_lock; /* Protects bo_list */
 	struct list_head bo_list;

@@ -171,6 +176,8 @@ struct ivpu_file_priv {
 	struct mutex ms_lock; /* Protects ms_instance_list, ms_info_bo */
 	struct list_head ms_instance_list;
 	struct ivpu_bo *ms_info_bo;
+	struct xa_limit job_limit;
+	struct xa_limit default_job_limit;
 	bool has_mmu_faults;
 	bool bound;
 	bool aborted;

drivers/accel/ivpu/ivpu_job.c +27 ~~-10~~

@@ -21,8 +21,6 @@
 #include "vpu_boot_api.h"
 
 #define CMD_BUF_IDX	     0
-#define JOB_ID_JOB_MASK	     GENMASK(7, 0)
-#define JOB_ID_CONTEXT_MASK  GENMASK(31, 8)
 #define JOB_MAX_BUFFER_COUNT 65535
 
 static void ivpu_cmdq_ring_db(struct ivpu_device *vdev, struct ivpu_cmdq *cmdq)

@@ -77,9 +75,28 @@ static void ivpu_preemption_buffers_free
 	ivpu_bo_free(cmdq->secondary_preempt_buf);
 }
 
+static int ivpu_id_alloc(struct xarray *xa, u32 *id, void *entry, struct xa_limit *limit,
+			 const struct xa_limit default_limit)
+{
+	int ret;
+
+	ret = __xa_alloc(xa, id, entry, *limit, GFP_KERNEL);
+	if (ret) {
+		limit->min = default_limit.min;
+		ret = __xa_alloc(xa, id, entry, *limit, GFP_KERNEL);
+		if (ret)
+			return ret;
+	}
+
+	limit->min = *id + 1;
+	if (limit->min > limit->max)
+		limit->min = default_limit.min;
+
+	return ret;
+}
+
 static struct ivpu_cmdq *ivpu_cmdq_alloc(struct ivpu_file_priv *file_priv)
 {
-	struct xa_limit db_xa_limit = {.max = IVPU_MAX_DB, .min = IVPU_MIN_DB};
 	struct ivpu_device *vdev = file_priv->vdev;
 	struct ivpu_cmdq *cmdq;
 	int ret;

@@ -88,7 +105,10 @@ static struct ivpu_cmdq *ivpu_cmdq_alloc
 	if (!cmdq)
 		return NULL;
 
-	ret = xa_alloc(&vdev->db_xa, &cmdq->db_id, NULL, db_xa_limit, GFP_KERNEL);
+	xa_lock(&vdev->db_xa); /* lock here to protect db_limit */
+	ret = ivpu_id_alloc(&vdev->db_xa, &cmdq->db_id, NULL, &vdev->db_limit,
+			    vdev->default_db_limit);
+	xa_unlock(&vdev->db_xa);
 	if (ret) {
 		ivpu_err(vdev, "Failed to allocate doorbell id: %d\n", ret);
 		goto err_free_cmdq;

@@ -519,7 +539,6 @@ static int ivpu_job_submit(struct ivpu_j
 {
 	struct ivpu_file_priv *file_priv = job->file_priv;
 	struct ivpu_device *vdev = job->vdev;
-	struct xa_limit job_id_range;
 	struct ivpu_cmdq *cmdq;
 	bool is_first_job;
 	int ret;

@@ -530,7 +549,7 @@ static int ivpu_job_submit(struct ivpu_j
 
 	mutex_lock(&file_priv->lock);
 
-	cmdq = ivpu_cmdq_acquire(job->file_priv, job->engine_idx, priority);
+	cmdq = ivpu_cmdq_acquire(file_priv, job->engine_idx, priority);
 	if (!cmdq) {
 		ivpu_warn_ratelimited(vdev, "Failed to get job queue, ctx %d engine %d prio %d\n",
 				      file_priv->ctx.id, job->engine_idx, priority);

@@ -538,12 +557,10 @@ static int ivpu_job_submit(struct ivpu_j
 		goto err_unlock_file_priv;
 	}
 
-	job_id_range.min = FIELD_PREP(JOB_ID_CONTEXT_MASK, (file_priv->ctx.id - 1));
-	job_id_range.max = job_id_range.min | JOB_ID_JOB_MASK;
-
 	xa_lock(&vdev->submitted_jobs_xa);
 	is_first_job = xa_empty(&vdev->submitted_jobs_xa);
-	ret = __xa_alloc(&vdev->submitted_jobs_xa, &job->job_id, job, job_id_range, GFP_KERNEL);
+	ret = ivpu_id_alloc(&vdev->submitted_jobs_xa, &job->job_id, job, &file_priv->job_limit,
+			    file_priv->default_job_limit);
 	if (ret) {
 		ivpu_dbg(vdev, JOB, "Too many active jobs in ctx %d\n",
 			 file_priv->ctx.id);

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #141 lore raw

PATCH 141/164 accel/ivpu: Use xa_alloc_cyclic() instead of custom function

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Karol Wachowski <[email protected]>

commit ae7af7d8dc2a13a427aa90d003fe4fb2c168342a upstream.

Remove custom ivpu_id_alloc() wrapper used for ID allocations and replace it with standard xa_alloc_cyclic() API.

The idea behind ivpu_id_alloc() was to have monotonic IDs, so the driver is easier to debug because same IDs are not reused all over. The same can be achieved just by using appropriate Linux API.

Link https://patchwork.freedesktop.org/patch/msgid/[email protected]

Reviewed-by Jeffrey Hugo <[email protected]>

Signed-off-by Jacek Lawrynowicz <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/accel/ivpu/ivpu_drv.c |   11 ++++-------
 drivers/accel/ivpu/ivpu_drv.h |    4 ++--
 drivers/accel/ivpu/ivpu_job.c |   34 ++++++----------------------------
 3 files changed, 12 insertions(+), 37 deletions(-)

drivers/accel/ivpu/ivpu_drv.c +4 -7

@@ -260,10 +260,8 @@ static int ivpu_open(struct drm_device *
 	if (ret)
 		goto err_xa_erase;
 
-	file_priv->default_job_limit.min = FIELD_PREP(IVPU_JOB_ID_CONTEXT_MASK,
-						      (file_priv->ctx.id - 1));
-	file_priv->default_job_limit.max = file_priv->default_job_limit.min | IVPU_JOB_ID_JOB_MASK;
-	file_priv->job_limit = file_priv->default_job_limit;
+	file_priv->job_limit.min = FIELD_PREP(IVPU_JOB_ID_CONTEXT_MASK, (file_priv->ctx.id - 1));
+	file_priv->job_limit.max = file_priv->job_limit.min | IVPU_JOB_ID_JOB_MASK;
 
 	mutex_unlock(&vdev->context_list_lock);
 	drm_dev_exit(idx);

@@ -612,9 +610,8 @@ static int ivpu_dev_init(struct ivpu_dev
 	lockdep_set_class(&vdev->submitted_jobs_xa.xa_lock, &submitted_jobs_xa_lock_class_key);
 	INIT_LIST_HEAD(&vdev->bo_list);
 
-	vdev->default_db_limit.min = IVPU_MIN_DB;
-	vdev->default_db_limit.max = IVPU_MAX_DB;
-	vdev->db_limit = vdev->default_db_limit;
+	vdev->db_limit.min = IVPU_MIN_DB;
+	vdev->db_limit.max = IVPU_MAX_DB;
 
 	ret = drmm_mutex_init(&vdev->drm, &vdev->context_list_lock);
 	if (ret)

drivers/accel/ivpu/ivpu_drv.h +2 -2

@@ -140,7 +140,7 @@ struct ivpu_device {
 
 	struct xarray db_xa;
 	struct xa_limit db_limit;
-	struct xa_limit default_db_limit;
+	u32 db_next;
 
 	struct mutex bo_list_lock; /* Protects bo_list */
 	struct list_head bo_list;

@@ -177,7 +177,7 @@ struct ivpu_file_priv {
 	struct list_head ms_instance_list;
 	struct ivpu_bo *ms_info_bo;
 	struct xa_limit job_limit;
-	struct xa_limit default_job_limit;
+	u32 job_id_next;
 	bool has_mmu_faults;
 	bool bound;
 	bool aborted;

drivers/accel/ivpu/ivpu_job.c +6 ~~-28~~

@@ -75,26 +75,6 @@ static void ivpu_preemption_buffers_free
 	ivpu_bo_free(cmdq->secondary_preempt_buf);
 }
 
-static int ivpu_id_alloc(struct xarray *xa, u32 *id, void *entry, struct xa_limit *limit,
-			 const struct xa_limit default_limit)
-{
-	int ret;
-
-	ret = __xa_alloc(xa, id, entry, *limit, GFP_KERNEL);
-	if (ret) {
-		limit->min = default_limit.min;
-		ret = __xa_alloc(xa, id, entry, *limit, GFP_KERNEL);
-		if (ret)
-			return ret;
-	}
-
-	limit->min = *id + 1;
-	if (limit->min > limit->max)
-		limit->min = default_limit.min;
-
-	return ret;
-}
-
 static struct ivpu_cmdq *ivpu_cmdq_alloc(struct ivpu_file_priv *file_priv)
 {
 	struct ivpu_device *vdev = file_priv->vdev;

@@ -105,11 +85,9 @@ static struct ivpu_cmdq *ivpu_cmdq_alloc
 	if (!cmdq)
 		return NULL;
 
-	xa_lock(&vdev->db_xa); /* lock here to protect db_limit */
-	ret = ivpu_id_alloc(&vdev->db_xa, &cmdq->db_id, NULL, &vdev->db_limit,
-			    vdev->default_db_limit);
-	xa_unlock(&vdev->db_xa);
-	if (ret) {
+	ret = xa_alloc_cyclic(&vdev->db_xa, &cmdq->db_id, NULL, vdev->db_limit, &vdev->db_next,
+			      GFP_KERNEL);
+	if (ret < 0) {
 		ivpu_err(vdev, "Failed to allocate doorbell id: %d\n", ret);
 		goto err_free_cmdq;
 	}

@@ -559,9 +537,9 @@ static int ivpu_job_submit(struct ivpu_j
 
 	xa_lock(&vdev->submitted_jobs_xa);
 	is_first_job = xa_empty(&vdev->submitted_jobs_xa);
-	ret = ivpu_id_alloc(&vdev->submitted_jobs_xa, &job->job_id, job, &file_priv->job_limit,
-			    file_priv->default_job_limit);
-	if (ret) {
+	ret = __xa_alloc_cyclic(&vdev->submitted_jobs_xa, &job->job_id, job, file_priv->job_limit,
+				&file_priv->job_id_next, GFP_KERNEL);
+	if (ret < 0) {
 		ivpu_dbg(vdev, JOB, "Too many active jobs in ctx %d\n",
 			 file_priv->ctx.id);
 		ret = -EBUSY;

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #142 lore raw

PATCH 142/164 accel/ivpu: Fix a typo

Link https://patchwork.freedesktop.org/patch/msgid/[email protected]

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrew Kreimer <[email protected]>

commit 284a8908f5ec25355a831e3e2d87975d748e98dc upstream.

Fix a typo in comments.

Reported-by Matthew Wilcox <[email protected]>

Signed-off-by Andrew Kreimer <[email protected]>

Signed-off-by Simona Vetter <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/accel/ivpu/vpu_boot_api.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/accel/ivpu/vpu_boot_api.h +1 -1

@@ -8,7 +8,7 @@
 
 /*
  * =========== FW API version information beginning ================
- *  The bellow values will be used to construct the version info this way:
+ *  The below values will be used to construct the version info this way:
  *  fw_bin_header->api_version[VPU_BOOT_API_VER_ID] = (VPU_BOOT_API_VER_MAJOR << 16) |
  *  VPU_BOOT_API_VER_MINOR;
  *  VPU_BOOT_API_VER_PATCH will be ignored. KMD and compatibility is not affected if this changes

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #143 lore raw

PATCH 143/164 accel/ivpu: Update VPU FW API headers

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrzej Kacprowski <[email protected]>

commit a4293cc75348409f998c991c48cbe5532c438114 upstream.

This commit bumps:
- Boot API from 3.24.0 to 3.26.3
- JSM API from 3.16.0 to 3.25.0

Signed-off-by Andrzej Kacprowski <[email protected]>

Co-developed-by Tomasz Rusinowicz <[email protected]>

Signed-off-by Tomasz Rusinowicz <[email protected]>

Link https://patchwork.freedesktop.org/patch/msgid/[email protected]

Signed-off-by Jacek Lawrynowicz <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/accel/ivpu/ivpu_job.c     |    2 
 drivers/accel/ivpu/ivpu_jsm_msg.c |    3 
 drivers/accel/ivpu/vpu_boot_api.h |   43 +++--
 drivers/accel/ivpu/vpu_jsm_api.h  |  303 ++++++++++++++++++++++++++++++++------
 4 files changed, 292 insertions(+), 59 deletions(-)

drivers/accel/ivpu/ivpu_job.c +1 -1

@@ -352,7 +352,7 @@ static int ivpu_cmdq_push_job(struct ivp
 		return -EBUSY;
 	}
 
-	entry = &cmdq->jobq->job[tail];
+	entry = &cmdq->jobq->slot[tail].job;
 	entry->batch_buf_addr = job->cmd_buf_vpu_addr;
 	entry->job_id = job->job_id;
 	entry->flags = 0;

drivers/accel/ivpu/ivpu_jsm_msg.c +2 -1

@@ -48,9 +48,10 @@ const char *ivpu_jsm_msg_type_to_str(enu
 	IVPU_CASE_TO_STR(VPU_JSM_MSG_HWS_RESUME_ENGINE_DONE);
 	IVPU_CASE_TO_STR(VPU_JSM_MSG_STATE_DUMP);
 	IVPU_CASE_TO_STR(VPU_JSM_MSG_STATE_DUMP_RSP);
-	IVPU_CASE_TO_STR(VPU_JSM_MSG_BLOB_DEINIT);
+	IVPU_CASE_TO_STR(VPU_JSM_MSG_BLOB_DEINIT_DEPRECATED);
 	IVPU_CASE_TO_STR(VPU_JSM_MSG_DYNDBG_CONTROL);
 	IVPU_CASE_TO_STR(VPU_JSM_MSG_JOB_DONE);
+	IVPU_CASE_TO_STR(VPU_JSM_MSG_NATIVE_FENCE_SIGNALLED);
 	IVPU_CASE_TO_STR(VPU_JSM_MSG_ENGINE_RESET_DONE);
 	IVPU_CASE_TO_STR(VPU_JSM_MSG_ENGINE_PREEMPT_DONE);
 	IVPU_CASE_TO_STR(VPU_JSM_MSG_REGISTER_DB_DONE);

drivers/accel/ivpu/vpu_boot_api.h +28 ~~-15~~

106 lines not on this page · raw message

drivers/accel/ivpu/vpu_jsm_api.h +261 ~~-42~~

443 lines not on this page · raw message

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #144 lore raw

PATCH 144/164 accel/ivpu: Abort all jobs after command queue unregister

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Karol Wachowski <[email protected]>

commit 5bbccadaf33eea2b879d8326ad59ae0663be47d1 upstream.

With hardware scheduler it is not expected to receive JOB_DONE notifications from NPU FW for the jobs aborted due to command queue destroy JSM command.

Remove jobs submitted to unregistered command queue from submitted_jobs_xa to avoid triggering a TDR in such case.

Add explicit submitted_jobs_lock that protects access to list of submitted jobs which is now used to find jobs to abort.

Move context abort procedure to separate work queue not to slow down handling of IPCs or DCT requests in case where job abort takes longer, especially when destruction of the last job of a specific context results in context release.

Link https://patchwork.freedesktop.org/patch/msgid/[email protected]

Signed-off-by Jacek Lawrynowicz <[email protected]>

[ This backport removes all the lines from upstream commit related to
the command queue UAPI, as it is not present in the 6.12 kernel and should not be backported. ]

Signed-off-by Jacek Lawrynowicz <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/accel/ivpu/ivpu_drv.c   |   32 ++-------------
 drivers/accel/ivpu/ivpu_drv.h   |    2 
 drivers/accel/ivpu/ivpu_job.c   |   82 +++++++++++++++++++++++++++++++---------
 drivers/accel/ivpu/ivpu_job.h   |    1 
 drivers/accel/ivpu/ivpu_mmu.c   |    3 -
 drivers/accel/ivpu/ivpu_sysfs.c |    5 +-
 6 files changed, 77 insertions(+), 48 deletions(-)

drivers/accel/ivpu/ivpu_drv.c +6 ~~-26~~

@@ -36,8 +36,6 @@
 			   __stringify(DRM_IVPU_DRIVER_MINOR) "."
 #endif
 
-static struct lock_class_key submitted_jobs_xa_lock_class_key;
-
 int ivpu_dbg_mask;
 module_param_named(dbg_mask, ivpu_dbg_mask, int, 0644);
 MODULE_PARM_DESC(dbg_mask, "Driver debug mask. See IVPU_DBG_* macros.");

@@ -455,26 +453,6 @@ static const struct drm_driver driver =
 	.minor = DRM_IVPU_DRIVER_MINOR,
 };
 
-static void ivpu_context_abort_invalid(struct ivpu_device *vdev)
-{
-	struct ivpu_file_priv *file_priv;
-	unsigned long ctx_id;
-
-	mutex_lock(&vdev->context_list_lock);
-
-	xa_for_each(&vdev->context_xa, ctx_id, file_priv) {
-		if (!file_priv->has_mmu_faults || file_priv->aborted)
-			continue;
-
-		mutex_lock(&file_priv->lock);
-		ivpu_context_abort_locked(file_priv);
-		file_priv->aborted = true;
-		mutex_unlock(&file_priv->lock);
-	}
-
-	mutex_unlock(&vdev->context_list_lock);
-}
-
 static irqreturn_t ivpu_irq_thread_handler(int irq, void *arg)
 {
 	struct ivpu_device *vdev = arg;

@@ -488,9 +466,6 @@ static irqreturn_t ivpu_irq_thread_handl
 		case IVPU_HW_IRQ_SRC_IPC:
 			ivpu_ipc_irq_thread_handler(vdev);
 			break;
-		case IVPU_HW_IRQ_SRC_MMU_EVTQ:
-			ivpu_context_abort_invalid(vdev);
-			break;
 		case IVPU_HW_IRQ_SRC_DCT:
 			ivpu_pm_dct_irq_thread_handler(vdev);
 			break;

@@ -607,16 +582,21 @@ static int ivpu_dev_init(struct ivpu_dev
 	xa_init_flags(&vdev->context_xa, XA_FLAGS_ALLOC | XA_FLAGS_LOCK_IRQ);
 	xa_init_flags(&vdev->submitted_jobs_xa, XA_FLAGS_ALLOC1);
 	xa_init_flags(&vdev->db_xa, XA_FLAGS_ALLOC1);
-	lockdep_set_class(&vdev->submitted_jobs_xa.xa_lock, &submitted_jobs_xa_lock_class_key);
 	INIT_LIST_HEAD(&vdev->bo_list);
 
 	vdev->db_limit.min = IVPU_MIN_DB;
 	vdev->db_limit.max = IVPU_MAX_DB;
 
+	INIT_WORK(&vdev->context_abort_work, ivpu_context_abort_thread_handler);
+
 	ret = drmm_mutex_init(&vdev->drm, &vdev->context_list_lock);
 	if (ret)
 		goto err_xa_destroy;
 
+	ret = drmm_mutex_init(&vdev->drm, &vdev->submitted_jobs_lock);
+	if (ret)
+		goto err_xa_destroy;
+
 	ret = drmm_mutex_init(&vdev->drm, &vdev->bo_list_lock);
 	if (ret)
 		goto err_xa_destroy;

drivers/accel/ivpu/ivpu_drv.h +2 -0

@@ -137,6 +137,7 @@ struct ivpu_device {
 	struct mutex context_list_lock; /* Protects user context addition/removal */
 	struct xarray context_xa;
 	struct xa_limit context_xa_limit;
+	struct work_struct context_abort_work;
 
 	struct xarray db_xa;
 	struct xa_limit db_limit;

@@ -145,6 +146,7 @@ struct ivpu_device {
 	struct mutex bo_list_lock; /* Protects bo_list */
 	struct list_head bo_list;
 
+	struct mutex submitted_jobs_lock; /* Protects submitted_jobs */
 	struct xarray submitted_jobs_xa;
 	struct ivpu_ipc_consumer job_done_consumer;

drivers/accel/ivpu/ivpu_job.c +64 ~~-18~~

159 lines not on this page · raw message

drivers/accel/ivpu/ivpu_job.h +1 -0

@@ -64,6 +64,7 @@ void ivpu_cmdq_reset_all_contexts(struct
 
 void ivpu_job_done_consumer_init(struct ivpu_device *vdev);
 void ivpu_job_done_consumer_fini(struct ivpu_device *vdev);
+void ivpu_context_abort_thread_handler(struct work_struct *work);
 
 void ivpu_jobs_abort_all(struct ivpu_device *vdev);

drivers/accel/ivpu/ivpu_mmu.c +1 -2

@@ -917,8 +917,7 @@ void ivpu_mmu_irq_evtq_handler(struct iv
 		REGV_WR32(IVPU_MMU_REG_EVTQ_CONS_SEC, vdev->mmu->evtq.cons);
 	}
 
-	if (!kfifo_put(&vdev->hw->irq.fifo, IVPU_HW_IRQ_SRC_MMU_EVTQ))
-		ivpu_err_ratelimited(vdev, "IRQ FIFO full\n");
+	queue_work(system_wq, &vdev->context_abort_work);
 }
 
 void ivpu_mmu_evtq_dump(struct ivpu_device *vdev)

drivers/accel/ivpu/ivpu_sysfs.c +3 -2

@@ -30,11 +30,12 @@ npu_busy_time_us_show(struct device *dev
 	struct ivpu_device *vdev = to_ivpu_device(drm);
 	ktime_t total, now = 0;
 
-	xa_lock(&vdev->submitted_jobs_xa);
+	mutex_lock(&vdev->submitted_jobs_lock);
+
 	total = vdev->busy_time;
 	if (!xa_empty(&vdev->submitted_jobs_xa))
 		now = ktime_sub(ktime_get(), vdev->busy_start_ts);
-	xa_unlock(&vdev->submitted_jobs_xa);
+	mutex_unlock(&vdev->submitted_jobs_lock);
 
 	return sysfs_emit(buf, "%lld\n", ktime_to_us(ktime_add(total, now)));
 }

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #145 lore raw

PATCH 145/164 accel/ivpu: Fix locking order in ivpu_job_submit

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Karol Wachowski <[email protected]>

commit ab680dc6c78aa035e944ecc8c48a1caab9f39924 upstream.

Fix deadlock in job submission and abort handling. When a thread aborts currently executing jobs due to a fault, it first locks the global lock protecting submitted_jobs (#1).

After the last job is destroyed, it proceeds to release the related context and locks file_priv (#2). Meanwhile, in the job submission thread, the file_priv lock (#2) is taken first, and then the submitted_jobs lock (#1) is obtained when a job is added to the submitted jobs list.

       CPU0                            CPU1
       ----                    	       ----
  (for example due to a fault)         (jobs submissions keep coming)

lock(&vdev->submitted_jobs_lock) #1
ivpu_jobs_abort_all()
job_destroy()

                                      lock(&file_priv->lock)           #2
                                      lock(&vdev->submitted_jobs_lock) #1

file_priv_release()
lock(&vdev->context_list_lock)
lock(&file_priv->lock) #2

This order of locking causes a deadlock. To resolve this issue, change the order of locking in ivpu_job_submit().

Link https://patchwork.freedesktop.org/patch/msgid/[email protected]

Signed-off-by Jacek Lawrynowicz <[email protected]>

[ This backport required small adjustments to ivpu_job_submit(), which
lacks support for explicit command queue creation added in 6.15. ]

Signed-off-by Jacek Lawrynowicz <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/accel/ivpu/ivpu_job.c |   15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

drivers/accel/ivpu/ivpu_job.c +6 -9

@@ -535,6 +535,7 @@ static int ivpu_job_submit(struct ivpu_j
 	if (ret < 0)
 		return ret;
 
+	mutex_lock(&vdev->submitted_jobs_lock);
 	mutex_lock(&file_priv->lock);
 
 	cmdq = ivpu_cmdq_acquire(file_priv, job->engine_idx, priority);

@@ -542,11 +543,9 @@ static int ivpu_job_submit(struct ivpu_j
 		ivpu_warn_ratelimited(vdev, "Failed to get job queue, ctx %d engine %d prio %d\n",
 				      file_priv->ctx.id, job->engine_idx, priority);
 		ret = -EINVAL;
-		goto err_unlock_file_priv;
+		goto err_unlock;
 	}
 
-	mutex_lock(&vdev->submitted_jobs_lock);
-
 	is_first_job = xa_empty(&vdev->submitted_jobs_xa);
 	ret = xa_alloc_cyclic(&vdev->submitted_jobs_xa, &job->job_id, job, file_priv->job_limit,
 			      &file_priv->job_id_next, GFP_KERNEL);

@@ -554,7 +553,7 @@ static int ivpu_job_submit(struct ivpu_j
 		ivpu_dbg(vdev, JOB, "Too many active jobs in ctx %d\n",
 			 file_priv->ctx.id);
 		ret = -EBUSY;
-		goto err_unlock_submitted_jobs;
+		goto err_unlock;
 	}
 
 	ret = ivpu_cmdq_push_job(cmdq, job);

@@ -576,22 +575,20 @@ static int ivpu_job_submit(struct ivpu_j
 		 job->job_id, file_priv->ctx.id, job->engine_idx, priority,
 		 job->cmd_buf_vpu_addr, cmdq->jobq->header.tail);
 
-	mutex_unlock(&vdev->submitted_jobs_lock);
 	mutex_unlock(&file_priv->lock);
 
 	if (unlikely(ivpu_test_mode & IVPU_TEST_MODE_NULL_HW)) {
-		mutex_lock(&vdev->submitted_jobs_lock);
 		ivpu_job_signal_and_destroy(vdev, job->job_id, VPU_JSM_STATUS_SUCCESS);
-		mutex_unlock(&vdev->submitted_jobs_lock);
 	}
 
+	mutex_unlock(&vdev->submitted_jobs_lock);
+
 	return 0;
 
 err_erase_xa:
 	xa_erase(&vdev->submitted_jobs_xa, job->job_id);
-err_unlock_submitted_jobs:
+err_unlock:
 	mutex_unlock(&vdev->submitted_jobs_lock);
-err_unlock_file_priv:
 	mutex_unlock(&file_priv->lock);
 	ivpu_rpm_put(vdev);
 	return ret;

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #146 lore raw

PATCH 146/164 accel/ivpu: Add handling of VPU_JSM_STATUS_MVNCI_CONTEXT_VIOLATION_HW

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Karol Wachowski <[email protected]>

commit dad945c27a42dfadddff1049cf5ae417209a8996 upstream.

Mark as invalid context of a job that returned HW context violation error and queue work that aborts jobs from faulty context. Add engine reset to the context abort thread handler to not only abort currently executing jobs but also to ensure NPU invalid state recovery.

Link https://patchwork.freedesktop.org/patch/msgid/[email protected]

Signed-off-by Jacek Lawrynowicz <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/accel/ivpu/ivpu_job.c |   25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

drivers/accel/ivpu/ivpu_job.c +25 -0

@@ -486,6 +486,26 @@ static int ivpu_job_signal_and_destroy(s
 
 	lockdep_assert_held(&vdev->submitted_jobs_lock);
 
+	job = xa_load(&vdev->submitted_jobs_xa, job_id);
+	if (!job)
+		return -ENOENT;
+
+	if (job_status == VPU_JSM_STATUS_MVNCI_CONTEXT_VIOLATION_HW) {
+		guard(mutex)(&job->file_priv->lock);
+
+		if (job->file_priv->has_mmu_faults)
+			return 0;
+
+		/*
+		 * Mark context as faulty and defer destruction of the job to jobs abort thread
+		 * handler to synchronize between both faults and jobs returning context violation
+		 * status and ensure both are handled in the same way
+		 */
+		job->file_priv->has_mmu_faults = true;
+		queue_work(system_wq, &vdev->context_abort_work);
+		return 0;
+	}
+
 	job = ivpu_job_remove_from_submitted_jobs(vdev, job_id);
 	if (!job)
 		return -ENOENT;

@@ -795,6 +815,9 @@ void ivpu_context_abort_thread_handler(s
 	struct ivpu_job *job;
 	unsigned long id;
 
+	if (vdev->fw->sched_mode == VPU_SCHEDULING_MODE_HW)
+		ivpu_jsm_reset_engine(vdev, 0);
+
 	mutex_lock(&vdev->context_list_lock);
 	xa_for_each(&vdev->context_xa, ctx_id, file_priv) {
 		if (!file_priv->has_mmu_faults || file_priv->aborted)

@@ -808,6 +831,8 @@ void ivpu_context_abort_thread_handler(s
 
 	if (vdev->fw->sched_mode != VPU_SCHEDULING_MODE_HW)
 		return;
+
+	ivpu_jsm_hws_resume_engine(vdev, 0);
 	/*
 	 * In hardware scheduling mode NPU already has stopped processing jobs
 	 * and won't send us any further notifications, thus we have to free job related resources

Greg Kroah-Hartman

author maintainer

2025-05-07 19:05 UTC #147 lore raw

PATCH 147/164 sch_htb: make htb_qlen_notify() idempotent

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Cong Wang <[email protected]>

commit 5ba8b837b522d7051ef81bacf3d95383ff8edce5 upstream.

htb_qlen_notify() always deactivates the HTB class and in fact could trigger a warning if it is already deactivated. Therefore, it is not idempotent and not friendly to its callers, like fq_codel_dequeue().

Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers' life.

Signed-off-by Cong Wang <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Paolo Abeni <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/sched/sch_htb.c |    2 ++
 1 file changed, 2 insertions(+)

net/sched/sch_htb.c +2 -0

@@ -1485,6 +1485,8 @@ static void htb_qlen_notify(struct Qdisc
 {
 	struct htb_class *cl = (struct htb_class *)arg;
 
+	if (!cl->prio_activity)
+		return;
 	htb_deactivate(qdisc_priv(sch), cl);
 }

Greg Kroah-Hartman

author maintainer

2025-05-07 19:06 UTC #148 lore raw

PATCH 148/164 sch_drr: make drr_qlen_notify() idempotent

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Cong Wang <[email protected]>

commit df008598b3a00be02a8051fde89ca0fbc416bd55 upstream.

drr_qlen_notify() always deletes the DRR class from its active list with list_del(), therefore, it is not idempotent and not friendly to its callers, like fq_codel_dequeue().

Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers' life. Also change other list_del()'s to list_del_init() just to be extra safe.

Signed-off-by Cong Wang <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Paolo Abeni <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/sched/sch_drr.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

net/sched/sch_drr.c +4 -3

@@ -110,6 +110,7 @@ static int drr_change_class(struct Qdisc
 		return -ENOBUFS;
 
 	gnet_stats_basic_sync_init(&cl->bstats);
+	INIT_LIST_HEAD(&cl->alist);
 	cl->common.classid = classid;
 	cl->quantum	   = quantum;
 	cl->qdisc	   = qdisc_create_dflt(sch->dev_queue,

@@ -234,7 +235,7 @@ static void drr_qlen_notify(struct Qdisc
 {
 	struct drr_class *cl = (struct drr_class *)arg;
 
-	list_del(&cl->alist);
+	list_del_init(&cl->alist);
 }
 
 static int drr_dump_class(struct Qdisc *sch, unsigned long arg,

@@ -393,7 +394,7 @@ static struct sk_buff *drr_dequeue(struc
 			if (unlikely(skb == NULL))
 				goto out;
 			if (cl->qdisc->q.qlen == 0)
-				list_del(&cl->alist);
+				list_del_init(&cl->alist);
 
 			bstats_update(&cl->bstats, skb);
 			qdisc_bstats_update(sch, skb);

@@ -434,7 +435,7 @@ static void drr_reset_qdisc(struct Qdisc
 	for (i = 0; i < q->clhash.hashsize; i++) {
 		hlist_for_each_entry(cl, &q->clhash.hash[i], common.hnode) {
 			if (cl->qdisc->q.qlen)
-				list_del(&cl->alist);
+				list_del_init(&cl->alist);
 			qdisc_reset(cl->qdisc);
 		}
 	}

Greg Kroah-Hartman

author maintainer

2025-05-07 19:06 UTC #149 lore raw

PATCH 149/164 sch_hfsc: make hfsc_qlen_notify() idempotent

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Cong Wang <[email protected]>

commit 51eb3b65544c9efd6a1026889ee5fb5aa62da3bb upstream.

hfsc_qlen_notify() is not idempotent either and not friendly to its callers, like fq_codel_dequeue(). Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers' life:

1. update_vf() decreases cl->cl_nactive, so we can check whether it is non-zero before calling it.

2. eltree_remove() always removes RB node cl->el_node, but we can use RB_EMPTY_NODE() + RB_CLEAR_NODE() to make it safe.

Signed-off-by Cong Wang <[email protected]>

Link https://patch.msgid.link/[email protected] open here

Signed-off-by Paolo Abeni <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/sched/sch_hfsc.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

net/sched/sch_hfsc.c +6 -2

@@ -203,7 +203,10 @@ eltree_insert(struct hfsc_class *cl)
 static inline void
 eltree_remove(struct hfsc_class *cl)
 {
-	rb_erase(&cl->el_node, &cl->sched->eligible);
+	if (!RB_EMPTY_NODE(&cl->el_node)) {
+		rb_erase(&cl->el_node, &cl->sched->eligible);
+		RB_CLEAR_NODE(&cl->el_node);
+	}
 }
 
 static inline void

@@ -1225,7 +1228,8 @@ hfsc_qlen_notify(struct Qdisc *sch, unsi
 	/* vttree is now handled in update_vf() so that update_vf(cl, 0, 0)
 	 * needs to be called explicitly to remove a class from vttree.
 	 */
-	update_vf(cl, 0, 0);
+	if (cl->cl_nactive)
+		update_vf(cl, 0, 0);
 	if (cl->cl_flags & HFSC_RSC)
 		eltree_remove(cl);
 }

Greg Kroah-Hartman

author maintainer

2025-05-07 19:06 UTC #150 lore raw

PATCH 150/164 sch_qfq: make qfq_qlen_notify() idempotent

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Cong Wang <[email protected]>

commit 55f9eca4bfe30a15d8656f915922e8c98b7f0728 upstream.

qfq_qlen_notify() always deletes its class from its active list with list_del_init() _and_ calls qfq_deactivate_agg() when the whole list becomes empty.

To make it idempotent, just skip everything when it is not in the active list.

Also change other list_del()'s to list_del_init() just to be extra safe.

Signed-off-by Cong Wang <[email protected]>

Link https://patch.msgid.link/[email protected] open here