Skip to contentSkip to conversation

dt-bindings: ata: Convert ti,dm816-ahci to DT schema

PATCH Applied Rob Herring (Arm) 3 participants 4 messages May 12, 2025 – May 14, 2025

Subsystems (2)
Device tree bindings libata
lore
Share & tools
lore

Rob Herring (Arm)

author maintainer
#0 lore raw

PATCH 1/1 dt-bindings: ata: Convert ti,dm816-ahci to DT schema

Convert the TI DM816 AHCI SATA Controller to DT schema format. It's a straight-forward conversion.

Signed-off-by Rob Herring (Arm) <[email protected]>
---
 .../devicetree/bindings/ata/ahci-dm816.txt    | 21 ---------
 .../bindings/ata/ti,dm816-ahci.yaml           | 43 +++++++++++++++++++
 2 files changed, 43 insertions(+), 21 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/ata/ahci-dm816.txt
 create mode 100644 Documentation/devicetree/bindings/ata/ti,dm816-ahci.yaml
Documentation/devicetree/bindings/ata/ahci-dm816.txt deleted +0 -21
deleted file mode 100644
index f8c535f3541f..000000000000
@@ -1,21 +0,0 @@
-Device tree binding for the TI DM816 AHCI SATA Controller
----------------------------------------------------------
-
-Required properties:
-  - compatible: must be "ti,dm816-ahci"
-  - reg: physical base address and size of the register region used by
-         the controller (as defined by the AHCI 1.1 standard)
-  - interrupts: interrupt specifier (refer to the interrupt binding)
-  - clocks: list of phandle and clock specifier pairs (or only
-            phandles for clock providers with '0' defined for
-            #clock-cells); two clocks must be specified: the functional
-            clock and an external reference clock
-
-Example:
-
-	sata: sata@4a140000 {
-		compatible = "ti,dm816-ahci";
-		reg = <0x4a140000 0x10000>;
-		interrupts = <16>;
-		clocks = <&sysclk5_ck>, <&sata_refclk>;
-	};
Documentation/devicetree/bindings/ata/ti,dm816-ahci.yaml new file +43 -0

43 lines not on this page · raw message

Signature · 1 line
2.47.2
maintainer Applied
#2 lore raw
In reply to Rob Herring (Arm)
Quoted 4 lines · Rob Herring (Arm)

Convert the TI DM816 AHCI SATA Controller to DT schema format. It's a straight-forward conversion.

Signed-off-by Rob Herring (Arm) <[email protected]>

Applied to for-6.16. Thanks !

Note: I will wait a little more for the other patches to see if reviews come in.

Signature · 2 lines
Damien Le Moal
Western Digital Research
author maintainer
#3 lore raw
Quoted 9 lines · Damien Le Moal
Quoted 4 lines · Rob Herring (Arm)

Convert the TI DM816 AHCI SATA Controller to DT schema format. It's a straight-forward conversion.

Signed-off-by Rob Herring (Arm) <[email protected]>

Applied to for-6.16. Thanks !

Note: I will wait a little more for the other patches to see if reviews come in.

Some of this stuff is ancient, so you might not. xgene is pretty much abandoned, but there's still a handful of machines around with people using occasionally.

Rob