Skip to contentSkip to conversation

fstests: btrfs/020: use device pool to avoid busy TEST_DEV

PATCH In review Qu Wenruo 2 participants 2 messages May 13, 2025 – May 14, 2025 Btrfs file system

lore
Share & tools
lore

Qu Wenruo

author
#0 lore raw

PATCH v2 1/1 fstests: btrfs/020: use device pool to avoid busy TEST_DEV

[BUG]
There is an internal report about btrfs/020 failure, the 020.full looks like this:

ERROR: ioctl(DEV_REPLACE_START) failed on "/opt/test/020.5968.mnt": Read-only file system

Performing full device TRIM /dev/loop8 (256.00MiB) ...
_check_btrfs_filesystem: filesystem on /dev/loop0 is inconsistent
*** fsck.btrfs output ***
ERROR: /dev/loop0 is currently mounted, use --force if you really intend to check the filesystem Opening filesystem to check...
*** end fsck.btrfs output
*** mount output ***
[...]
/dev/loop0 on /opt/test type btrfs (rw,relatime,seclabel,ssd,discard=async,space_cache=v2,subvolid=5,subvol=/) *** end mount output

[CAUSE]
Unfortunately I can not reproduce the situation here, but it looks like by somehow we didn't unmount the TEST_DEV before checking it.

This may or may not be caused by the fact we're using loop back devices on TEST_MNT.

[FIX]
For this particluar test case, we really do not need to use TEST_MNT and create complex loopback devices.

We can just ask for 3 devices from the device pool, use 2 for the raid1 fs, and then use the spare one for dev replace.

This should greately simplify the test case setup and cleanup, thus avoid the above busy TEST_DEV and false test failure.

Furthermore use the golden output to match the error message, and since we're here also handle a bug in btrfs-progs where the error message is incorrectly split into two lines.

---
Changelog:
v2:
- Use golden output to match the error
- Add a filter to filter out the unexpected new line Btrfs-progs will also get a fix for the incorrect line break.

---
 tests/btrfs/020     | 47 +++++++++++++++------------------------------
 tests/btrfs/020.out |  2 +-
 2 files changed, 17 insertions(+), 32 deletions(-)
tests/btrfs/020 +16 -31
index 7e5c6fd7..3b5f9f2f 100755
@@ -12,44 +12,29 @@
 . ./common/preamble
 _begin_fstest auto quick replace volume
 
-# Override the default cleanup function.
-_cleanup()
-{
-	cd /
-	rm -f $tmp.*
-	$UMOUNT_PROG $loop_mnt
-	_destroy_loop_device $loop_dev1
-	losetup -d $loop_dev2 >/dev/null 2>&1
-	_destroy_loop_device $loop_dev3
-	rm -rf $loop_mnt
-	rm -f $fs_img1 $fs_img2 $fs_img3
-}
-
 . ./common/filter
 
-_require_test
-_require_loop
+_require_scratch_dev_pool 3
 
-echo "Silence is golden"
+_fixed_by_kernel_commit bbb651e469d9 \
+	"Btrfs: don't allow the replace procedure on read only filesystems"
 
-loop_mnt=$TEST_DIR/$seq.$$.mnt
-fs_img1=$TEST_DIR/$seq.$$.img1
-fs_img2=$TEST_DIR/$seq.$$.img2
-fs_img3=$TEST_DIR/$seq.$$.img3
-mkdir $loop_mnt
-$XFS_IO_PROG -f -c "truncate 256m" $fs_img1 >>$seqres.full 2>&1
-$XFS_IO_PROG -f -c "truncate 256m" $fs_img2 >>$seqres.full 2>&1
-$XFS_IO_PROG -f -c "truncate 256m" $fs_img3 >>$seqres.full 2>&1
+_scratch_dev_pool_get 2
+_spare_dev_get
 
-loop_dev1=`_create_loop_device $fs_img1`
-loop_dev2=`_create_loop_device $fs_img2`
-loop_dev3=`_create_loop_device $fs_img3`
+_scratch_pool_mkfs -m raid1 -d raid1 >> $seqres.full 2>&1
+_scratch_mount -o ro
 
-_mkfs_dev -m raid1 -d raid1 $loop_dev1 $loop_dev2 >>$seqres.full 2>&1
-_mount -o ro $loop_dev1 $loop_mnt
+# The replace is expected to fail.
+#
+# There is an unexpected newline at the middle of the error message, filter it out
+# to handle older progs (unexpected new line) and newer ones (new line removed).
+$BTRFS_UTIL_PROG replace start -B 2 $SPARE_DEV $SCRATCH_MNT 2>&1 >> $seqres.full | \
+	sed -e "/^$/d" | _filter_scratch
 
-$BTRFS_UTIL_PROG replace start -B 2 $loop_dev3 $loop_mnt >>$seqres.full 2>&1 && \
-_fail "FAIL: Device replaced on RO btrfs"
+_scratch_unmount
+_spare_dev_put
+_scratch_dev_pool_put
 
 status=0
 exit
tests/btrfs/020.out +1 -1
index 20d7944e..a3ede235 100644
@@ -1,2 +1,2 @@
 QA output created by 020
-Silence is golden
+ERROR: ioctl(DEV_REPLACE_START) failed on "SCRATCH_MNT": Read-only file system
Signature · 1 line
2.49.0
Reviewed-by on v2 1/1
#1 lore raw
Quoted 8 lines

---
Changelog:
v2:
- Use golden output to match the error
- Add a filter to filter out the unexpected new line Btrfs-progs will also get a fix for the incorrect line break.

Tested for backward compatibility with and without the btrfs-progs patch.

Thanks, Anand