Skip to contentSkip to conversation

drivers/nvme: Add quirks for device 025e:f1ac

PATCH Superseded ilya guterman 3 participants 5 messages May 10, 2025 – May 14, 2025 NVMe

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drivers/nvme: Add quirks for device 025e:f1ac

From: Ilya Guterman <[email protected]>

This commit adds NVME_QUIRK_NO_DEEPEST_PS for
device [126f:2262], which belongs to device SOLIDIGM P44 Pro SSDPFKKW020X7

The device frequently have trouble exiting the deepest power state (5), resulting in the entire disk unresponsive.

Verified by setting nvme_core.default_ps_max_latency_us=10000 and observing them behaving normally. Also by running with the patch couldn't reproduce the issue after multiple wake up from sleeps. Running without the patch again reprodcued the issue on the first wake from sleep.

---
 drivers/nvme/host/pci.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/nvme/host/pci.c +2 -0
index d49b69565d04..d62fef76cc07 100644
@@ -3734,6 +3734,8 @@ static const struct pci_device_id nvme_id_table[] = {
 		.driver_data = NVME_QUIRK_NO_DEEPEST_PS, },
 	{ PCI_DEVICE(0x1e49, 0x0041),   /* ZHITAI TiPro7000 NVMe SSD */
 		.driver_data = NVME_QUIRK_NO_DEEPEST_PS, },
+	{ PCI_DEVICE(0x025e, 0xf1ac),   /* SOLIDIGM  P44 pro SSDPFKKW020X7  */
+		.driver_data = NVME_QUIRK_NO_DEEPEST_PS, },
 	{ PCI_DEVICE(0xc0a9, 0x540a),   /* Crucial P2 */
 		.driver_data = NVME_QUIRK_BOGUS_NID, },
 	{ PCI_DEVICE(0x1d97, 0x2263), /* Lexar NM610 */
Signature · 1 line
2.49.0
#1 lore raw
Quoted 7 lines · ilya guterman

From: Ilya Guterman <[email protected]>

This commit adds NVME_QUIRK_NO_DEEPEST_PS for
device [126f:2262], which belongs to device SOLIDIGM P44 Pro SSDPFKKW020X7

The device frequently have trouble exiting the deepest power state (5), resulting in the entire disk unresponsive.

Does this happen in more than one host system?

#2 lore raw

I've only been able to test on my own host system, but I found similar reports from others online.

Let me quote from the reddit conversation
https://www.reddit.com/r/buildapcsales/comments/1e4tgge/comment/ldha0ye/

Quoted 3 lines

If it’s the same issues as the Solidigm P44 Pro, don’t recommend. Has a couple issues:
2. There also appears to be a NVME controller issue where it disconnects or something. Results in a full system crash and the drive unable to be found upon reboot attempts. Requires full power cycle. Unsure if this affects the P41 Platinum

Quoted 1 line

I experienced #2, it's something relating to the power saving state and it being unable to wake up in time. The fix on Linux is to add the boot parameter nvme_core.default_ps_max_latency_us=0. There exists no fix for Windows.

Here’s a report about the drive disconnecting randomly, although it’s unclear whether it’s related to waking up from sleep.
https://community.solidigm.com/t5/solid-state-drives-nand/p44-pro-nvme-controller-is-down-will-reset/m-p/24348

#4 lore raw

my bad, I was sure I added the Signed-off-by tag.
I will submit a new version of the patch.