Add support for Firefly Station-M3/ROC-RK3588S-PC
Subsystems (2)
v3 cover Add support for Firefly Station-M3/ROC-RK3588S-PC
This series add support for Firefly Station-M3/ROC-RK3588S-PC.
Info of device can be found at:
https://wiki.t-firefly.com/en/Station-M3/index.html
Changes in v3:
- Update the name of leds
- Add more cpu nodes
- Update mdio compatible
- Fix the order in the node
- Add the default serial port(uart2)
Changes in v2:
- Fix rgmii delays
Changes in v1:
- Add support for Firefly ROC-RK3588S-PC
Hsun Lai (2):
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588S-PC
arm64: dts: rockchip: add DTs for Firefly ROC-RK3588S-PC
.../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3588s-roc-pc.dts | 926 ++++++++++++++++++ 3 files changed, 932 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts
Signature · 1 line
2.34.1
PATCH v3 1/2 dt-bindings: arm: rockchip: Add Firefly ROC-RK3588S-PC
This documents Firefly ROC-RK3588S-PC which is a SBC based on RK3588S SoC.
---
(no changes since v1)
Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++ 1 file changed, 5 insertions(+)
Documentation/devicetree/bindings/arm/rockchip.yaml +5 -0
@@ -258,6 +258,11 @@ properties: - const: firefly,rk3566-roc-pc - const: rockchip,rk3566 + - description: Firefly Station M3 + items: + - const: firefly,rk3588s-roc-pc + - const: rockchip,rk3588s + - description: Firefly Station P2 items: - const: firefly,rk3568-roc-pc
Signature · 1 line
2.34.1
PATCH v3 2/2 arm64: dts: rockchip: add DTs for Firefly ROC-RK3588S-PC
In reply to Hsun LaiThe Firefly ROC-RK3588S-PC is a SBC based on the Rockchip RK3588s SoC.
The device contains the following hardware that is tested/working:
- 32 or 64GB eMMC
- SDMMC card slot
- Realtek USB WiFi 5/BT
- NVME 2242 socket
- 4 or 8GB of RAM
- RTL8211 GbE
- USB 3.0 port
- USB 2.0 port
- HDMI port
---
Changes in v3:
- Update the name of leds
- Add more cpu nodes
- Update mdio compatible
- Fix the order in the node
- Add the default serial port(uart2)
Changes in v2:
- Fix rgmii delays
Changes in v1:
- Add support for Firefly ROC-RK3588S-PC
arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3588s-roc-pc.dts | 926 ++++++++++++++++++ 2 files changed, 927 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts
arch/arm64/boot/dts/rockchip/Makefile +1 -0
@@ -182,6 +182,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5c.dtb
arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts new file +926 -0
926 lines not on this page · raw message
Signature · 1 line
2.34.1
Re: [PATCH v3 2/2] arm64: dts: rockchip: add DTs for Firefly ROC-RK3588S-PC
Quoted 211 lines · Hsun Lai
The Firefly ROC-RK3588S-PC is a SBC based on the Rockchip RK3588s SoC.
The device contains the following hardware that is tested/working:
- 32 or 64GB eMMC
- SDMMC card slot
- Realtek USB WiFi 5/BT
- NVME 2242 socket
- 4 or 8GB of RAM
- RTL8211 GbE
- USB 3.0 port
- USB 2.0 port
- HDMI portSigned-off-by Hsun Lai <[email protected]>---
Changes in v3:
- Update the name of leds
- Add more cpu nodes
- Update mdio compatible
- Fix the order in the node
- Add the default serial port(uart2)Changes in v2:
- Fix rgmii delaysChanges in v1:
- Add support for Firefly ROC-RK3588S-PCarch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3588s-roc-pc.dts | 926 ++++++++++++++++++ 2 files changed, 927 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dtsarch/arm64/boot/dts/rockchip/Makefile +1
-0@@ -182,6 +182,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5c.dtbarch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts new file +155
-0@@ -0,0 +1,926 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include <dt-bindings/usb/pd.h> +#include "rk3588s.dtsi" + +/ { + model = "Firefly Station M3"; + compatible = "firefly,rk3588s-roc-pc", "rockchip,rk3588s"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + analog-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + simple-audio-card,name = "rockchip,es8388"; + simple-audio-card,bitclock-master = <&masterdai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&masterdai>; + simple-audio-card,hp-det-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,pin-switches = "Headphones"; + simple-audio-card,routing = + "Headphones", "LOUT1", + "Headphones", "ROUT1", + "LINPUT1", "Microphone Jack", + "RINPUT1", "Microphone Jack", + "LINPUT2", "Onboard Microphone", + "RINPUT2", "Onboard Microphone"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone", + "Headphone", "Headphones"; + + simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + + masterdai: simple-audio-card,codec { + sound-dai = <&es8388>; + system-clock-frequency = <12288000>; + }; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi0_out_con>; + }; + }; + }; + + fan: fan { + compatible = "pwm-fan"; + cooling-levels = <60 100 140 160 185 220 255>; + fan-supply = <&vcc12v_dcin>; + pwms = <&pwm11 0 50000 1>; + #cooling-cells = <2>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led-0 { + default-state = "on"; + function = LED_FUNCTION_POWER; + gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-2 { + default-state = "off"; + gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + }; + }; + + vcc12v_dcin: regulator-vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usbdcin: regulator-vcc5v0-usbdcin { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usbdcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: regulator-vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usbdcin>; + }; + + vcc3v3_pcie20: regulator-vcc3v3-pcie20 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie20"; + enable-active-high; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + gpio = <&gpio1 RK_PD7 GPIO_ACTIVE_HIGH>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_host: regulator-vcc5v0-host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default";
arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts line 165
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts new file +10
-0+ pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vbus5v0_typec_pwr_en: vbus5v0-typec-pwr-en-regulator {
The "regulator" should be a prefix instead of a suffix to be consistent.
Quoted 229 lines
arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts new file +229
-0+ compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&typec5v_pwren>; + regulator-name = "vbus5v0_typec_pwr_en"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gmac1 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + pinctrl-0 = <&gmac1_miim + &gmac1_tx_bus2 + &gmac1_rx_bus2 + &gmac1_rgmii_clk + &gmac1_rgmii_bus>; + pinctrl-names = "default"; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&hdmi0 { + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi0>; + }; +}; + +&hdmi0_out { + hdmi0_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdptxphy0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + pinctrl-0 = <&i2c2m0_xfer>; + status = "okay"; + + usbc0: usb-typec@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usbc0_int>; + vbus-supply = <&vbus5v0_typec_pwr_en>; + + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + op-sink-microwatt = <1000000>; + power-role = "dual"; + sink-pdos = + <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>; + source-pdos = + <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + try-power-role = "sink"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc0_orien_sw: endpoint { + remote-endpoint = <&usbdp_phy0_orientation_switch>; + }; + }; + + port@1 { + reg = <1>; + + dp_altmode_mux: endpoint { + remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; + }; + }; + }; + }; + }; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + }; +}; + + +&i2c3 { + status = "okay"; + + es8388: audio-codec@10 { + compatible = "everest,es8388", "everest,es8328"; + reg = <0x10>; + clocks = <&cru I2S1_8CH_MCLKOUT>; + AVDD-supply = <&vcc_3v3_s0>; + DVDD-supply = <&vcc_1v8_s0>; + HPVDD-supply = <&vcc_3v3_s0>; + PVDD-supply = <&vcc_3v3_s0>; + assigned-clocks = <&cru I2S1_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + #sound-dai-cells = <0>; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck
arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts line 404
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts new file +10
-0+ &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; +}; + +&i2s5_8ch { + status = "okay"; +};
To use this, hdmi0_sound will also need to be enabled.
Quoted 530 lines
arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts new file +522
-1+ +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&rtl8211f_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie2x1l1 { + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie20>; + status = "okay"; +}; + +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + headphone { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_pins: led-pins { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + rtl8211 { + rtl8211f_rst: rtl8211f-rst { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usbc0_int: usbc0-int { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + typec5v_pwren: typec5v-pwren { + rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm11 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm11m3_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sdio; + no-sd; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vcc_1v1_nldo_s3: vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-name = "avcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-name = "avdd_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-name = "avdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-name = "vdd_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + + +&tsadc { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy3_host { + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&uart7 { + pinctrl-0 = <&uart7m2_xfer>; + status = "okay"; +}; + +&usbdp_phy0 { + mode-switch; + orientation-switch; + sbu1-dc-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + sbu2-dc-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + usbdp_phy0_orientation_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_orien_sw>; + }; + + usbdp_phy0_dp_altmode_mux: endpoint@1 { + reg = <1>; + remote-endpoint = <&dp_altmode_mux>; + }; + }; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&u2phy0>; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi0_in_vp0>; + }; +}; --2.34.1
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
Rob Herring (Arm)
maintainerQuoted 22 lines · Hsun Lai
This series add support for Firefly Station-M3/ROC-RK3588S-PC.
Info of device can be found at:
https://wiki.t-firefly.com/en/Station-M3/index.htmlChanges in v3:
- Update the name of leds
- Add more cpu nodes
- Update mdio compatible
- Fix the order in the node
- Add the default serial port(uart2)Changes in v2:
- Fix rgmii delaysChanges in v1:
- Add support for Firefly ROC-RK3588S-PCHsun Lai (2):
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588S-PC
arm64: dts: rockchip: add DTs for Firefly ROC-RK3588S-PC
Quoted 11 lines
.../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3588s-roc-pc.dts | 926 ++++++++++++++++++ 3 files changed, 932 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts--
2.34.1
My bot found new DTB warnings on the .dts files added or changed in this series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: attempting to guess base-commit...
Base: remotes/arm-soc/rockchip/dt64-31-ge463625af7f9 (exact match)
If this is not the correct base, please add 'base-commit' tag (or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/rockchip/' for [email protected]:
arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dtb: /edp@fdec0000: failed to match any schema with compatible: ['rockchip,rk3588-edp']
Heiko Stübner
maintainerAm Samstag, 17. Mai 2025, 15:18:25 Mitteleuropäische Sommerzeit schrieb Rob Herring (Arm):
Quoted 55 lines · Hsun Lai
Quoted 22 lines
This series add support for Firefly Station-M3/ROC-RK3588S-PC.
Info of device can be found at:
https://wiki.t-firefly.com/en/Station-M3/index.htmlChanges in v3:
- Update the name of leds
- Add more cpu nodes
- Update mdio compatible
- Fix the order in the node
- Add the default serial port(uart2)Changes in v2:
- Fix rgmii delaysChanges in v1:
- Add support for Firefly ROC-RK3588S-PCHsun Lai (2):
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588S-PC
arm64: dts: rockchip: add DTs for Firefly ROC-RK3588S-PCQuoted 11 lines
.../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3588s-roc-pc.dts | 926 ++++++++++++++++++ 3 files changed, 932 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts--
2.34.1My bot found new DTB warnings on the .dts files added or changed in this series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date:
pip3 install dtschema --upgradeThis patch series was applied (using b4) to base:
Base: attempting to guess base-commit...
Base: remotes/arm-soc/rockchip/dt64-31-ge463625af7f9 (exact match)
Quoted 6 lines
If this is not the correct base, please add 'base-commit' tag (or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for
arch/arm64/boot/dts/rockchip/' for [email protected]:
arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dtb: /edp@fdec0000: failed to match any schema with compatible: ['rockchip,rk3588-edp']
hmm, the binding for rockchip,rk3588-edp is in linux-next though [0]