dt-bindings: clock: Convert axis,artpec6-clkctrl to DT schema

deleted file mode 100644
index dff9cdf0009c..000000000000
@@ -1,41 +0,0 @@
-* Clock bindings for Axis ARTPEC-6 chip
-
-The bindings are based on the clock provider binding in
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-External clocks:
-----------------
-
-There are two external inputs to the main clock controller which should be
-provided using the common clock bindings.
-- "sys_refclk": External 50 Mhz oscillator (required)
-- "i2s_refclk": Alternate audio reference clock (optional).
-
-Main clock controller
----------------------
-
-Required properties:
-- #clock-cells: Should be <1>
-  See dt-bindings/clock/axis,artpec6-clkctrl.h for the list of valid identifiers.
-- compatible: Should be "axis,artpec6-clkctrl"
-- reg: Must contain the base address and length of the system controller
-- clocks:  Must contain a phandle entry for each clock in clock-names
-- clock-names: Must include the external oscillator ("sys_refclk"). Optional
-  ones are the audio reference clock ("i2s_refclk") and the audio fractional
-  dividers ("frac_clk0" and "frac_clk1").
-
-Examples:
-
-ext_clk: ext_clk {
-	#clock-cells = <0>;
-	compatible = "fixed-clock";
-	clock-frequency = <50000000>;
-};
-
-clkctrl: clkctrl@f8000000 {
-	#clock-cells = <1>;
-	compatible = "axis,artpec6-clkctrl";
-	reg = <0xf8000000 0x48>;
-	clocks = <&ext_clk>;
-	clock-names = "sys_refclk";
-};

55 lines not on this page · raw message