Skip to contentSkip to conversation

dt-bindings: clock: Convert lsi,axm5516-clks to DT schema

PATCH Applied Rob Herring (Arm) 2 participants 2 messages May 21, 2025 – Jun 19, 2025

Subsystems (2)
Device tree bindings Common clk
lore
Share & tools
lore

Rob Herring (Arm)

author maintainer
#0 lore raw

PATCH 1/1 dt-bindings: clock: Convert lsi,axm5516-clks to DT schema

Convert the Intel/LSI AXM5516 clock binding to DT schema format. It's a straight forward conversion.

Signed-off-by Rob Herring (Arm) <[email protected]>
---
 .../bindings/clock/lsi,axm5516-clks.txt       | 29 -------------
 .../bindings/clock/lsi,axm5516-clks.yaml      | 43 +++++++++++++++++++
 2 files changed, 43 insertions(+), 29 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt
 create mode 100644 Documentation/devicetree/bindings/clock/lsi,axm5516-clks.yaml
Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt deleted +0 -29
deleted file mode 100644
index 3ce97cfe999b..000000000000
@@ -1,29 +0,0 @@
-AXM5516 clock driver bindings
------------------------------
-
-Required properties :
-- compatible : shall contain "lsi,axm5516-clks"
-- reg : shall contain base register location and length
-- #clock-cells : shall contain 1
-
-The consumer specifies the desired clock by having the clock ID in its "clocks"
-phandle cell. See <dt-bindings/clock/lsi,axxia-clock.h> for the list of
-supported clock IDs.
-
-Example:
-
-	clks: clock-controller@2010020000 {
-		compatible = "lsi,axm5516-clks";
-		#clock-cells = <1>;
-		reg = <0x20 0x10020000 0 0x20000>;
-	};
-
-	serial0: uart@2010080000 {
-		compatible = "arm,pl011", "arm,primecell";
-		reg = <0x20 0x10080000 0 0x1000>;
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks AXXIA_CLK_PER>;
-		clock-names = "apb_pclk";
-	};
-																																};
-
Documentation/devicetree/bindings/clock/lsi,axm5516-clks.yaml new file +43 -0

43 lines not on this page · raw message

Signature · 1 line
2.47.2
maintainer Applied
#1 lore raw

Quoting Rob Herring (Arm) (2025-05-21 14:07:40)

Quoted 5 lines

Convert the Intel/LSI AXM5516 clock binding to DT schema format. It's a straight forward conversion.

Signed-off-by Rob Herring (Arm) <[email protected]>

---

Applied to clk-next