Support system sleep with offloaded usb transfers
Subsystems (2)
v13 cover Support system sleep with offloaded usb transfers
Wesley Cheng and Mathias Nyman's USB offload design enables a co-processor to handle some USB transfers, potentially allowing the system to sleep (suspend-to-RAM) and save power. However, Linux's System Sleep model halts the USB host controller when the main system isn't managing any USB transfers. To address this, the proposal modifies the system to recognize offloaded USB transfers and manage power accordingly. This way, offloaded USB transfers could still happen during system sleep (Suspend-to-RAM).
This involves two key steps:
1. Transfer Status Tracking: Propose offload_usage and corresponding apis drivers could track USB transfers on the co-processor, ensuring the system is aware of any ongoing activity.
2. Power Management Adjustment: Modifications to the USB driver stack (xhci host controller driver, and USB device drivers) allow the system to sleep (Suspend-to-RAM) without disrupting co-processor managed USB transfers. This involves adding conditional checks to bypass some power management operations in the System Sleep model.
changelog
----------
Changes in v13:
- Ensure offload_usage is modified only when the device is neither suspended nor marked as "offload_at_suspend".
- Move lock manipulations into usb_offload_get()/usb_offload_put().
- Cosmetics changes on coding style.
Changes in v12:
- Rebase on TOT.
- Cosmetics changes on coding style.
Changes in v11:
- Use USB subsystem wrappers in usb_offload_get()/usb_offload_put().
- Refine logics and add comment in usb_suspend_both()/usb_resume_both().
Changes in v10:
- Remove unnecessary operations in dwc3 driver.
- Introduce CONFIG_USB_XHCI_SIDEBAND_SUSPEND to enable/disable offloaded usb transfers during system Suspend-to-RAM.
- Modify the approach to detect offloaded USB transfers when the system resumes from Suspend-to-RAM.
- Mark sideband activity when sideband interrupters are created/removed.
- Cosmetics changes on coding style.
Changes in v9:
- Remove unnecessary white space change.
Changes in v8:
- Change the runtime pm api to correct the error handling flow.
- Not flushing endpoints of actively offloaded USB devices to avoid possible USB transfer conflicts.
Changes in v7:
- Remove counting mechanism in struct usb_hcd. The USB device's offload status will be solely recorded in each related struct usb_device.
- Utilizes needs_remote_wakeup attribute in struct usb_interface to control the suspend flow of USB interfaces and associated USB endpoints. This addresses the need to support interrupt transfers generated by offloaded USB devices while the system is suspended.
- Block any offload_usage change during USB device suspend period.
Changes in v6:
- Fix build errors when CONFIG_USB_XHCI_SIDEBAND is disabled.
- Explicitly specify the data structure of the drvdata refereced in dwc3_suspend(), dwc3_resume().
- Move the initialization of counters to the patches introducing them.
Changes in v5:
- Walk through the USB children in usb_sideband_check() to determine the sideband activity under the specific USB device.
- Replace atomic_t by refcount_t.
- Reduce logs by using dev_dbg & remove __func__.
Changes in v4:
- Isolate the feature into USB driver stack.
- Integrate with series "Introduce QC USB SND audio offloading support"
Changes in v3:
- Integrate the feature with the pm core framework.
Changes in v2:
- Cosmetics changes on coding style.
[v3] PM / core: conditionally skip system pm in device/driver model [v2] usb: host: enable suspend-to-RAM control in userspace [v1] [RFC] usb: host: Allow userspace to control usb suspend flows
---
Guan-Yu Lin (4):
usb: xhci-plat: separate dev_pm_ops for each pm_event
usb: add apis for offload usage tracking
xhci: sideband: add api to trace sideband usage
usb: host: enable USB offload during system sleep
drivers/usb/core/driver.c | 175 +++++++++++++++++++++++++++++- drivers/usb/core/usb.c | 1 + drivers/usb/host/Kconfig | 11 ++ drivers/usb/host/xhci-plat.c | 42 ++++++- drivers/usb/host/xhci-plat.h | 1 + drivers/usb/host/xhci-sideband.c | 38 +++++++ include/linux/usb.h | 18 +++ include/linux/usb/xhci-sideband.h | 9 ++ 8 files changed, 285 insertions(+), 10 deletions(-)
Signature · 1 line
2.49.0.1164.gab81da1b16-goog
PATCH v13 1/4 usb: xhci-plat: separate dev_pm_ops for each pm_event
Separate dev_pm_ops for different power events such as suspend, thaw, and hibernation. This is crucial when xhci-plat driver needs to adapt its behavior based on different power state changes.
--- drivers/usb/host/xhci-plat.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-)
drivers/usb/host/xhci-plat.c +19 -4
@@ -453,7 +453,7 @@ void xhci_plat_remove(struct platform_device *dev) }EXPORT_SYMBOL_GPL (xhci_plat_remove); -static int xhci_plat_suspend (struct device *dev) +static int xhci_plat_suspend_common (struct device *dev) {struct usb_hcd *hcd =dev_get_drvdata (dev);struct xhci_hcd *xhci =hcd_to_xhci (hcd);
@@ -481,6 +481,16 @@ static int xhci_plat_suspend(struct device *dev)return 0 ; } +static int xhci_plat_suspend (struct device *dev) +{ +return xhci_plat_suspend_common (dev); +} + +static int xhci_plat_freeze (struct device *dev) +{ +return xhci_plat_suspend_common (dev); +} +static int xhci_plat_resume_common (struct device *dev,bool power_lost) {struct usb_hcd *hcd =dev_get_drvdata (dev);
@@ -528,6 +538,11 @@ static int xhci_plat_resume(struct device *dev)return xhci_plat_resume_common (dev, false); } +static int xhci_plat_thaw (struct device *dev) +{ +return xhci_plat_resume_common (dev, false); +} +static int xhci_plat_restore (struct device *dev) {return xhci_plat_resume_common (dev, true);
@@ -557,9 +572,9 @@ static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)const struct dev_pm_ops xhci_plat_pm_ops = { .suspend =pm_sleep_ptr (xhci_plat_suspend), .resume =pm_sleep_ptr (xhci_plat_resume), - .freeze =pm_sleep_ptr (xhci_plat_suspend), - .thaw =pm_sleep_ptr (xhci_plat_resume), - .poweroff =pm_sleep_ptr (xhci_plat_suspend), + .freeze =pm_sleep_ptr (xhci_plat_freeze), + .thaw =pm_sleep_ptr (xhci_plat_thaw), + .poweroff =pm_sleep_ptr (xhci_plat_freeze), .restore =pm_sleep_ptr (xhci_plat_restore), SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
Signature · 1 line
2.49.0.1164.gab81da1b16-goog
PATCH v13 2/4 usb: add apis for offload usage tracking
In reply to Guan-Yu LinIntroduce offload_usage and corresponding apis to track offload usage on each USB device. Offload denotes that there is another co-processor accessing the USB device via the same USB host controller. To optimize power usage, it's essential to monitor whether the USB device is actively used by other co-processor. This information is vital when determining if a USB device can be safely suspended during system power state transitions.
--- drivers/usb/core/driver.c | 125 ++++++++++++++++++++++++++++++++++++++ drivers/usb/core/usb.c | 1 + drivers/usb/host/Kconfig | 11 ++++ include/linux/usb.h | 18 ++++++ 4 files changed, 155 insertions(+)
drivers/usb/core/driver.c +125 -0
@@ -2036,6 +2036,131 @@ int usb_disable_usb2_hardware_lpm(struct usb_device *udev)#endif /* CONFIG_PM */ +#if IS_ENABLED (CONFIG_USB_XHCI_SIDEBAND_SUSPEND ) + +/** +* usb_offload_get - increment the offload_usage of a USB device +* @udev: the USB device to increment its offload_usage +* +* Incrementing the offload_usage of a usb_device indicates that offload is +* enabled on this usb_device; that is, another entity is actively handling USB +* transfers. This information allows the USB driver to adjust its power +* management policy based on offload activity. +* +* Return: 0 on success. A negative error code otherwise. +*/ +int usb_offload_get (struct usb_device *udev) +{ +int ret; + +usb_lock_device (udev); +if (udev->state ==USB_STATE_NOTATTACHED ) { + ret = -ENODEV ; + goto unlock_device; + }else if (udev->state ==USB_STATE_SUSPENDED || + udev->offload_at_suspend) { + ret = -EBUSY ; + goto unlock_device; + } + +/* +* offload_usage could only be modified when the device is active, since +* it will alter the suspend flow of the device. +*/ + ret =usb_autoresume_device (udev); + +if (ret <0 ) + goto unlock_device; + + udev->offload_usage++; +usb_autosuspend_device (udev); + +unlock_device: +usb_unlock_device (udev); + +return ret; +} +EXPORT_SYMBOL_GPL (usb_offload_get); + +/** +* usb_offload_put - drop the offload_usage of a USB device +* @udev: the USB device to drop its offload_usage +* +* The inverse operation of usb_offload_get, which drops the offload_usage of +* a USB device. This information allows the USB driver to adjust its power +* management policy based on offload activity. +* +* Return: 0 on success. A negative error code otherwise. +*/ +int usb_offload_put (struct usb_device *udev) +{ +int ret; + +usb_lock_device (udev); +if (udev->state ==USB_STATE_NOTATTACHED ) { + ret = -ENODEV ; + goto unlock_device; + }else if (udev->state ==USB_STATE_SUSPENDED || + udev->offload_at_suspend) { + ret = -EBUSY ; + goto unlock_device; + } + +/* +* offload_usage could only be modified when the device is active, since +* it will alter the suspend flow of the device. +*/ + ret =usb_autoresume_device (udev); + +if (ret <0 ) + goto unlock_device; + +/* Drop the count when it wasn't 0, ignore the operation otherwise. */ +if (udev->offload_usage) + udev->offload_usage--; +usb_autosuspend_device (udev); + +unlock_device: +usb_unlock_device (udev); + +return ret; +} +EXPORT_SYMBOL_GPL (usb_offload_put); + +/** +* usb_offload_check - check offload activities on a USB device +* @udev: the USB device to check its offload activity. +* +* Check if there are any offload activity on the USB device right now. This +* information could be used for power management or other forms of resource +* management. +* +* The caller must hold @udev's device lock. In addition, the caller should +* ensure downstream usb devices are all either suspended or marked as +* "offload_at_suspend" to ensure the correctness of the return value. +* +* Returns true on any offload activity, false otherwise. +*/ +bool usb_offload_check (struct usb_device *udev) +{ +struct usb_device *child; +bool active; +int port1; + +usb_hub_for_each_child (udev, port1, child) { +usb_lock_device (child); + active =usb_offload_check (child); +usb_unlock_device (child); +if (active) +return true; + } + +return !!udev->offload_usage; +} +EXPORT_SYMBOL_GPL (usb_offload_check); + +#endif /* IS_ENABLED(CONFIG_USB_XHCI_SIDEBAND_SUSPEND) */ +const struct bus_type usb_bus_type = { .name ="usb" , .match = usb_device_match,
drivers/usb/core/usb.c +1 -0
@@ -670,6 +670,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,set_dev_node (&dev->dev,dev_to_node (bus->sysdev)); dev->state =USB_STATE_ATTACHED ; dev->lpm_disable_count =1 ; + dev->offload_usage =0 ;atomic_set (&dev->urbnum,0 );INIT_LIST_HEAD (&dev->ep0.urb_list);
drivers/usb/host/Kconfig +11 -0
@@ -113,6 +113,17 @@ config USB_XHCI_SIDEBAND xHCI USB endpoints directly, allowing CPU to sleep while playing audio. +config USB_XHCI_SIDEBAND_SUSPEND + bool "xHCI support for sideband during system suspend" + depends on USB_XHCI_SIDEBAND + depends on USB_XHCI_PLATFORM + depends on SUSPEND + help + Say 'Y' to enable the support for the xHCI sideband capability + after system suspended. In addition to USB_XHCI_SIDEBAND, this + config allows endpoints and interrupters associated with the + sideband function when system is suspended. + config USB_XHCI_TEGRA tristate "xHCI support for NVIDIA Tegra SoCs" depends on PHY_TEGRA_XUSB
include/linux/usb.h +18 -0
@@ -635,6 +635,8 @@ struct usb3_lpm_parameters {* @do_remote_wakeup: remote wakeup should be enabled * @reset_resume: needs reset instead of resume * @port_is_suspended: the upstream port is suspended (L2 or U3) +* @offload_at_suspend: offload activities during suspend is enabled. +* @offload_usage: number of offload activities happening on this usb device. * @slot_id: Slot ID assigned by xHCI * @l1_params: best effor service latency for USB2 L1 LPM state, and L1 timeout. * @u1_params: exit latencies for USB3 U1 LPM state, and hub-initiated timeout.
@@ -723,6 +725,8 @@ struct usb_device { unsigned do_remote_wakeup:1; unsigned reset_resume:1; unsigned port_is_suspended:1; + unsigned offload_at_suspend:1; +int offload_usage;enum usb_link_tunnel_mode tunnel_mode;int slot_id;
@@ -839,6 +843,20 @@ static inline void usb_mark_last_busy(struct usb_device *udev) { }#endif +#if IS_ENABLED (CONFIG_USB_XHCI_SIDEBAND_SUSPEND ) +int usb_offload_get (struct usb_device *udev); +int usb_offload_put (struct usb_device *udev); +bool usb_offload_check (struct usb_device *udev); +#else + +static inline int usb_offload_get (struct usb_device *udev) +{return 0 ; } +static inline int usb_offload_put (struct usb_device *udev) +{return 0 ; } +static inline bool usb_offload_check (struct usb_device *udev) +{return false; } +#endif +extern int usb_disable_lpm (struct usb_device *udev);extern void usb_enable_lpm (struct usb_device *udev);/* Same as above, but these functions lock/unlock the bandwidth_mutex. */
Signature · 1 line
2.49.0.1164.gab81da1b16-goog
Greg KH
maintainerRe: [PATCH v13 2/4] usb: add apis for offload usage tracking
Quoted 21 lines · Guan-Yu Lin
Introduce
offload_usageand corresponding apis to track offload usage on each USB device. Offload denotes that there is another co-processor accessing the USB device via the same USB host controller. To optimize power usage, it's essential to monitor whether the USB device is actively used by other co-processor. This information is vital when determining if a USB device can be safely suspended during system power state transitions.Signed-off-by Guan-Yu Lin <[email protected]>--- drivers/usb/core/driver.c | 125 ++++++++++++++++++++++++++++++++++++++ drivers/usb/core/usb.c | 1 + drivers/usb/host/Kconfig | 11 ++++ include/linux/usb.h | 18 ++++++ 4 files changed, 155 insertions(+)drivers/usb/core/driver.c +0
-0
drivers/usb/core/driver.c int usb_disable_usb2_hardware_lpm(struct usb_device *udev) · line 2039
Quoted 4 lines
drivers/usb/core/driver.c +1
-0@@ -2036,6 +2036,131 @@ int usb_disable_usb2_hardware_lpm(struct usb_device *udev)#endif /* CONFIG_PM */ +#if IS_ENABLED (CONFIG_USB_XHCI_SIDEBAND_SUSPEND )
ifdef in .c files are messy and hard to maintain.
Also, why is an xhci-specific option enabling/disabling core USB functions like this? Shouldn't it be a generic USB config option name instead?
Quoted 10 lines
drivers/usb/core/driver.c +10
-0+ +/** +* usb_offload_get - increment the offload_usage of a USB device +* @udev: the USB device to increment its offload_usage +* +* Incrementing the offload_usage of a usb_device indicates that offload is +* enabled on this usb_device; that is, another entity is actively handling USB +* transfers. This information allows the USB driver to adjust its power +* management policy based on offload activity. +*
drivers/usb/core/driver.c int usb_disable_usb2_hardware_lpm(struct usb_device *udev) · line 2059
Quoted 10 lines
drivers/usb/core/driver.c +10
-0+* Return: 0 on success. A negative error code otherwise. +*/ +int usb_offload_get (struct usb_device *udev) +{ +int ret; + +usb_lock_device (udev); +if (udev->state ==USB_STATE_NOTATTACHED ) { + ret = -ENODEV ; + goto unlock_device;
Shouldn't we using the guard logic here instead? That would make all of this look much simpler and easier to maintain over time.
drivers/usb/core/driver.c int usb_disable_usb2_hardware_lpm(struct usb_device *udev) · line 2072
Quoted 13 lines
drivers/usb/core/driver.c +13
-0+ }else if (udev->state ==USB_STATE_SUSPENDED || + udev->offload_at_suspend) { + ret = -EBUSY ; + goto unlock_device; + } + +/* +* offload_usage could only be modified when the device is active, since +* it will alter the suspend flow of the device. +*/ + ret =usb_autoresume_device (udev); + +if (ret <0 )
Why the blank line?
Quoted 76 lines
drivers/usb/core/driver.c +76
-0+ goto unlock_device; + + udev->offload_usage++; +usb_autosuspend_device (udev); + +unlock_device: +usb_unlock_device (udev); + +return ret; +} +EXPORT_SYMBOL_GPL (usb_offload_get); + +/** +* usb_offload_put - drop the offload_usage of a USB device +* @udev: the USB device to drop its offload_usage +* +* The inverse operation of usb_offload_get, which drops the offload_usage of +* a USB device. This information allows the USB driver to adjust its power +* management policy based on offload activity. +* +* Return: 0 on success. A negative error code otherwise. +*/ +int usb_offload_put (struct usb_device *udev) +{ +int ret; + +usb_lock_device (udev); +if (udev->state ==USB_STATE_NOTATTACHED ) { + ret = -ENODEV ; + goto unlock_device; + }else if (udev->state ==USB_STATE_SUSPENDED || + udev->offload_at_suspend) { + ret = -EBUSY ; + goto unlock_device; + } + +/* +* offload_usage could only be modified when the device is active, since +* it will alter the suspend flow of the device. +*/ + ret =usb_autoresume_device (udev); + +if (ret <0 ) + goto unlock_device; + +/* Drop the count when it wasn't 0, ignore the operation otherwise. */ +if (udev->offload_usage) + udev->offload_usage--; +usb_autosuspend_device (udev); + +unlock_device: +usb_unlock_device (udev); + +return ret; +} +EXPORT_SYMBOL_GPL (usb_offload_put); + +/** +* usb_offload_check - check offload activities on a USB device +* @udev: the USB device to check its offload activity. +* +* Check if there are any offload activity on the USB device right now. This +* information could be used for power management or other forms of resource +* management. +* +* The caller must hold @udev's device lock. In addition, the caller should +* ensure downstream usb devices are all either suspended or marked as +* "offload_at_suspend" to ensure the correctness of the return value. +* +* Returns true on any offload activity, false otherwise. +*/ +bool usb_offload_check (struct usb_device *udev) +{ +struct usb_device *child; +bool active; +int port1;
drivers/usb/core/driver.c int usb_disable_usb2_hardware_lpm(struct usb_device *udev) · line 2158
Quoted 10 lines
drivers/usb/core/driver.c +10
-0+ +usb_hub_for_each_child (udev, port1, child) { +usb_lock_device (child); + active =usb_offload_check (child); +usb_unlock_device (child); +if (active) +return true; + } + +return !!udev->offload_usage;
I think you forgot to mark this function as requiring that the lock be held, right? Just documenting it isn't going to be simple to notice or maintain over time...
thanks,
greg k-h
Re: [PATCH v13 2/4] usb: add apis for offload usage tracking
Quoted 6 lines · Greg KH
Quoted 4 lines · Guan-Yu Lin
drivers/usb/core/driver.c +0
-0@@ -2036,6 +2036,131 @@ int usb_disable_usb2_hardware_lpm(struct usb_device *udev)#endif /* CONFIG_PM */
Quoted 8 lines
Review int usb_disable_usb2_hardware_lpm(struct usb_device *udev) · line 2039
Quoted 1 line
(quoted diff) +1
-0+#if IS_ENABLED(CONFIG_USB_XHCI_SIDEBAND_SUSPEND)ifdef in .c files are messy and hard to maintain.
Also, why is an xhci-specific option enabling/disabling core USB functions like this? Shouldn't it be a generic USB config option name instead?
To address the above 2 suggestions, I'll move related codes into a new file offload.c, and create a new config to manage them.
Quoted 12 lines
drivers/usb/core/driver.c int usb_disable_usb2_hardware_lpm(struct usb_device *udev) · line 2059
Quoted 8 lines
drivers/usb/core/driver.c +8
-0+int usb_offload_get (struct usb_device *udev) +{ +int ret; + +usb_lock_device (udev); +if (udev->state ==USB_STATE_NOTATTACHED ) { + ret = -ENODEV ; + goto unlock_device;Shouldn't we using the guard logic here instead? That would make all of this look much simpler and easier to maintain over time.
Thanks for the suggestion. Guard logics would be adapted in the next version.
Quoted 5 lines
Review int usb_disable_usb2_hardware_lpm(struct usb_device *udev) · line 2049
Quoted 2 lines
(quoted diff) +2
-0+ + if (ret < 0)Why the blank line?
I'll remove the blank line. Thanks for the heads up.
Quoted 20 lines
Quoted 5 lines
drivers/usb/core/driver.c +5
-0+bool usb_offload_check (struct usb_device *udev) +{ +struct usb_device *child; +bool active; +int port1;drivers/usb/core/driver.c int usb_disable_usb2_hardware_lpm(struct usb_device *udev) · line 2158
Quoted 10 lines
drivers/usb/core/driver.c +10
-0+ +usb_hub_for_each_child (udev, port1, child) { +usb_lock_device (child); + active =usb_offload_check (child); +usb_unlock_device (child); +if (active) +return true; + } + +return !!udev->offload_usage;I think you forgot to mark this function as requiring that the lock be held, right? Just documenting it isn't going to be simple to notice or maintain over time...
Quoted 3 lines
thanks,
greg k-h
__must_hold marco would be added in the next version. Thanks for the heads up.
Regards,
Guan-Yu
PATCH v13 3/4 xhci: sideband: add api to trace sideband usage
In reply to Guan-Yu LinThe existing sideband driver only registers sidebands without tracking their active usage. To address this, sideband will now record its active usage when it creates/removes interrupters. In addition, a new api is introduced to provide a means for other dirvers to fetch sideband activity information on a USB host controller.
--- drivers/usb/host/xhci-sideband.c | 38 +++++++++++++++++++++++++++++++ include/linux/usb/xhci-sideband.h | 9 ++++++++ 2 files changed, 47 insertions(+)
drivers/usb/host/xhci-sideband.c +38 -0
@@ -266,6 +266,33 @@ xhci_sideband_get_event_buffer(struct xhci_sideband *sb) }EXPORT_SYMBOL_GPL (xhci_sideband_get_event_buffer); +#if IS_ENABLED (CONFIG_USB_XHCI_SIDEBAND_SUSPEND ) +/** +* xhci_sideband_check - check the existence of active sidebands +* @hcd: the host controller driver associated with the target host controller +* +* Allow other drivers, such as usb controller driver, to check if there are +* any sideband activity on the host controller. This information could be used +* for power management or other forms of resource management. The caller should +* ensure downstream usb devices are all either suspended or marked as +* "offload_at_suspend" to ensure the correctness of the return value. +* +* Returns true on any active sideband existence, false otherwise. +*/ +bool xhci_sideband_check (struct usb_hcd *hcd) +{ +struct usb_device *udev = hcd->self.root_hub; +bool active; + +usb_lock_device (udev); + active =usb_offload_check (udev); +usb_unlock_device (udev); + +return active; +} +EXPORT_SYMBOL_GPL (xhci_sideband_check); +#endif /* IS_ENABLED(CONFIG_USB_XHCI_SIDEBAND_SUSPEND) */ +/** * xhci_sideband_create_interrupter - creates a new interrupter for this sideband * @sb: sideband instance for this usb device
@@ -286,6 +313,7 @@ xhci_sideband_create_interrupter(struct xhci_sideband *sb, int num_seg, bool ip_autoclear, u32 imod_interval, int intr_num) { int ret = 0; +struct usb_device *udev;if (!sb || !sb->xhci)return -ENODEV ;
@@ -304,6 +332,9 @@ xhci_sideband_create_interrupter(struct xhci_sideband *sb, int num_seg, goto out; } + udev = sb->vdev->udev; + ret =usb_offload_get (udev); + sb->ir->ip_autoclear = ip_autoclear; out:
@@ -323,6 +354,8 @@ EXPORT_SYMBOL_GPL(xhci_sideband_create_interrupter);void xhci_sideband_remove_interrupter (struct xhci_sideband *sb) { +struct usb_device *udev; +if (!sb || !sb->ir)return ;
@@ -330,6 +363,11 @@ xhci_sideband_remove_interrupter(struct xhci_sideband *sb)xhci_remove_secondary_interrupter (xhci_to_hcd (sb->xhci), sb->ir); sb->ir =NULL ; + udev = sb->vdev->udev; + +if (udev->state !=USB_STATE_NOTATTACHED ) +usb_offload_put (udev); +mutex_unlock (&sb->mutex); }EXPORT_SYMBOL_GPL (xhci_sideband_remove_interrupter);
include/linux/usb/xhci-sideband.h +9 -0
@@ -11,6 +11,7 @@#include <linux/scatterlist.h> #include <linux/usb.h> +#include <linux/usb/hcd.h> #define EP_CTX_PER_DEV 31/* FIXME defined twice, from xhci.h */
@@ -83,6 +84,14 @@ xhci_sideband_get_endpoint_buffer(struct xhci_sideband *sb, struct usb_host_endpoint *host_ep);struct sg_table *xhci_sideband_get_event_buffer (struct xhci_sideband *sb); + +#if IS_ENABLED (CONFIG_USB_XHCI_SIDEBAND_SUSPEND ) +bool xhci_sideband_check (struct usb_hcd *hcd); +#else +static inline bool xhci_sideband_check (struct usb_hcd *hcd) +{return false; } +#endif /* IS_ENABLED(CONFIG_USB_XHCI_SIDEBAND_SUSPEND) */ +int xhci_sideband_create_interrupter (struct xhci_sideband *sb,int num_seg,bool ip_autoclear,u32 imod_interval,int intr_num);
Signature · 1 line
2.49.0.1164.gab81da1b16-goog
PATCH v13 4/4 usb: host: enable USB offload during system sleep
In reply to Guan-Yu LinSharing a USB controller with another entity via xhci-sideband driver creates power management complexities. To prevent the USB controller from being inadvertently deactivated while in use by the other entity, a usage-count based mechanism is implemented. This allows the system to manage power effectively, ensuring the controller remains available whenever needed.
In order to maintain full functionality of an offloaded USB devices, several changes are made within the suspend flow of such devices:
- skip usb_suspend_device() so that the port/hub are still active for USB transfers via offloaded path.
- not suspending the endpoints which are used by USB interfaces marked with needs_remote_wakeup. Namely, skip usb_suspend_interface() and usb_hcd_flush_endpoint() on associated USB interfaces. This reserves a pending interrupt urb during system suspend for handling the interrupt transfer, which is necessary since remote wakeup doesn't apply in the offloaded USB devices when controller is still active.
- not flushing the endpoints of actively offloaded USB devices. Given that the USB devices is used by another entity, unilaterally flush the endpoint might lead to unexpected behavior on another entity.
- not suspending the xhci controller. This is done by skipping the suspend/resume callbacks in the xhci platform driver.
--- drivers/usb/core/driver.c | 50 +++++++++++++++++++++++++++++++----- drivers/usb/host/xhci-plat.c | 19 ++++++++++++++ drivers/usb/host/xhci-plat.h | 1 + 3 files changed, 64 insertions(+), 6 deletions(-)
drivers/usb/core/driver.c +44 -6
@@ -1420,11 +1420,28 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) udev->state == USB_STATE_SUSPENDED) goto done; +if (msg.event ==PM_EVENT_SUSPEND &&usb_offload_check (udev)) { +dev_dbg (&udev->dev,"device offloaded, skip suspend.\n" ); + udev->offload_at_suspend =1 ; + } +/* Suspend all the interfaces and then udev itself */ if (udev->actconfig) { n = udev->actconfig->desc.bNumInterfaces;for (i = n -1 ; i >=0 ; --i) { intf = udev->actconfig->interface[i]; +/* +* Don't suspend interfaces with remote wakeup while +* the controller is active. This preserves pending +* interrupt urbs, allowing interrupt events to be +* handled during system suspend. +*/ +if (udev->offload_at_suspend && + intf->needs_remote_wakeup) { +dev_dbg (&intf->dev, +"device offloaded, skip suspend.\n" ); +continue ; + } status =usb_suspend_interface (udev, intf, msg);/* Ignore errors during system sleep transitions */
@@ -1435,7 +1452,8 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) } }if (status ==0 ) { - status =usb_suspend_device (udev, msg); +if (!udev->offload_at_suspend) + status =usb_suspend_device (udev, msg);/* * Ignore errors from non-root-hub devices during
@@ -1480,9 +1498,11 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)*/ }else { udev->can_submit =0 ; -for (i =0 ; i <16 ; ++i) { -usb_hcd_flush_endpoint (udev, udev->ep_out[i]); -usb_hcd_flush_endpoint (udev, udev->ep_in[i]); +if (!udev->offload_at_suspend) { +for (i =0 ; i <16 ; ++i) { +usb_hcd_flush_endpoint (udev, udev->ep_out[i]); +usb_hcd_flush_endpoint (udev, udev->ep_in[i]); + } } }
@@ -1524,17 +1544,35 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg) udev->can_submit =1 ;/* Resume the device */ -if (udev->state ==USB_STATE_SUSPENDED || udev->reset_resume) - status =usb_resume_device (udev, msg); +if (udev->state ==USB_STATE_SUSPENDED || udev->reset_resume) { +if (!udev->offload_at_suspend) + status =usb_resume_device (udev, msg); +else +dev_dbg (&udev->dev, +"device offloaded, skip resume.\n" ); + }/* Resume the interfaces */ if (status ==0 && udev->actconfig) {for (i =0 ; i < udev->actconfig->desc.bNumInterfaces; i++) { intf = udev->actconfig->interface[i]; +/* +* Interfaces with remote wakeup aren't suspended +* while the controller is active. This preserves +* pending interrupt urbs, allowing interrupt events +* to be handled during system suspend. +*/ +if (udev->offload_at_suspend && + intf->needs_remote_wakeup) { +dev_dbg (&intf->dev, +"device offloaded, skip resume.\n" ); +continue ; + }usb_resume_interface (udev, intf, msg, udev->reset_resume); } } + udev->offload_at_suspend =0 ;usb_mark_last_busy (udev); done:
drivers/usb/host/xhci-plat.c +19 -0
@@ -20,6 +20,7 @@#include <linux/acpi.h> #include <linux/usb/of.h> #include <linux/reset.h> +#include <linux/usb/xhci-sideband.h> #include "xhci.h" #include "xhci-plat.h"
@@ -483,6 +484,15 @@ static int xhci_plat_suspend_common(struct device *dev)static int xhci_plat_suspend (struct device *dev) { +struct usb_hcd *hcd =dev_get_drvdata (dev); +struct xhci_plat_priv *priv =hcd_to_xhci_priv (hcd); + +if (xhci_sideband_check (hcd)) { + priv->sideband_at_suspend =1 ; +dev_dbg (dev,"sideband instance active, skip suspend.\n" ); +return 0 ; + } +return xhci_plat_suspend_common (dev); }
@@ -535,6 +545,15 @@ static int xhci_plat_resume_common(struct device *dev, bool power_lost)static int xhci_plat_resume (struct device *dev) { +struct usb_hcd *hcd =dev_get_drvdata (dev); +struct xhci_plat_priv *priv =hcd_to_xhci_priv (hcd); + +if (priv->sideband_at_suspend) { + priv->sideband_at_suspend =0 ; +dev_dbg (dev,"sideband instance active, skip resume.\n" ); +return 0 ; + } +return xhci_plat_resume_common (dev, false); }
drivers/usb/host/xhci-plat.h +1 -0
@@ -16,6 +16,7 @@ struct xhci_plat_priv {const char *firmware_name;unsigned long long quirks;bool power_lost; + unsigned sideband_at_suspend:1;void (*plat_start)(struct usb_hcd *);int (*init_quirk)(struct usb_hcd *);int (*suspend_quirk)(struct usb_hcd *);
Signature · 1 line
2.49.0.1164.gab81da1b16-goog