Skip to contentSkip to conversation

hwmon: clean up Makefile after sbrmi driver movement

PATCH In review Lukas Bulwahn 2 participants 2 messages May 29, 2025 – Jun 16, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 hwmon: clean up Makefile after sbrmi driver movement

From: Lukas Bulwahn <[email protected]>

Commit e15658676405 ("hwmon/misc: amd-sbi: Move core sbrmi from hwmon to misc") removes the config SENSORS_SBRMI, but misses the reference to that config in the Makefile.

Clean up that obsolete line in the Makefile.

---
 drivers/hwmon/Makefile | 1 -
 1 file changed, 1 deletion(-)
drivers/hwmon/Makefile +0 -1
index 48e5866c0c9a..726ffd9f6a1b 100644
@@ -196,7 +196,6 @@ obj-$(CONFIG_SENSORS_PWM_FAN)	+= pwm-fan.o
 obj-$(CONFIG_SENSORS_QNAP_MCU_HWMON)	+= qnap-mcu-hwmon.o
 obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON)	+= raspberrypi-hwmon.o
 obj-$(CONFIG_SENSORS_SBTSI)	+= sbtsi_temp.o
-obj-$(CONFIG_SENSORS_SBRMI)	+= sbrmi.o
 obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
 obj-$(CONFIG_SENSORS_SCH5627)	+= sch5627.o
 obj-$(CONFIG_SENSORS_SCH5636)	+= sch5636.o
Signature · 1 line
2.49.0
maintainer Acked-by on v1 1/1
#1 lore raw
Quoted 9 lines · Lukas Bulwahn

From: Lukas Bulwahn <[email protected]>

Commit e15658676405 ("hwmon/misc: amd-sbi: Move core sbrmi from hwmon to misc") removes the config SENSORS_SBRMI, but misses the reference to that config in the Makefile.

Clean up that obsolete line in the Makefile.

The hardware monitoring mailing list was not copied, meaning I almost missed this patch. Since the list wasn't copied, I assume that someone else is supposed to pick it up. Ok with me.

Guenter

Quoted 16 lines
---
  drivers/hwmon/Makefile | 1 -
  1 file changed, 1 deletion(-)
drivers/hwmon/Makefile +0 -1
index 48e5866c0c9a..726ffd9f6a1b 100644
@@ -196,7 +196,6 @@ obj-$(CONFIG_SENSORS_PWM_FAN)	+= pwm-fan.o
  obj-$(CONFIG_SENSORS_QNAP_MCU_HWMON)	+= qnap-mcu-hwmon.o
  obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON)	+= raspberrypi-hwmon.o
  obj-$(CONFIG_SENSORS_SBTSI)	+= sbtsi_temp.o
-obj-$(CONFIG_SENSORS_SBRMI)	+= sbrmi.o
  obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
  obj-$(CONFIG_SENSORS_SCH5627)	+= sch5627.o
  obj-$(CONFIG_SENSORS_SCH5636)	+= sch5636.o