FAILED: patch "[PATCH] arm64: dts: qcom: x1e78100-t14s: fix missing HID supplies" failed to apply to 6.12-stable tree
[email protected]
maintainerThe patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 55e52d055393f11ba0193975d3db87af36f4b273
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025060246-overstock-thumping-600e@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 55e52d055393f11ba0193975d3db87af36f4b273 Mon Sep 17 00:00:00 2001
From: Johan Hovold <[email protected]>
Date: Fri, 14 Mar 2025 15:54:40 +0100
Subject: [PATCH] arm64: dts: qcom: x1e78100-t14s: fix missing HID supplies
Add the missing HID supplies to avoid relying on other consumers to keep them on.
This also avoids the following warnings on boot:
i2c_hid_of 0-0010: supply vdd not found, using dummy regulator i2c_hid_of 0-0010: supply vddl not found, using dummy regulator i2c_hid_of 1-0015: supply vdd not found, using dummy regulator i2c_hid_of 1-002c: supply vdd not found, using dummy regulator i2c_hid_of 1-0015: supply vddl not found, using dummy regulator i2c_hid_of 1-002c: supply vddl not found, using dummy regulator i2c_hid_of 1-003a: supply vdd not found, using dummy regulator i2c_hid_of 1-003a: supply vddl not found, using dummy regulator
Note that VCC3B is also used for things like the modem which are not yet described so mark the regulator as always-on for now.
arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi +43 -0
@@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "x1e80100.dtsi"
@@ -169,6 +170,23 @@ vreg_edp_3p3: regulator-edp-3p3 { regulator-boot-on; }; + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&misc_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + regulator-always-on; + }; + vreg_nvme: regulator-nvme { compatible = "regulator-fixed";
@@ -692,6 +710,9 @@ touchpad@15 { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + wakeup-source; };
@@ -703,6 +724,9 @@ touchpad@2c { hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + wakeup-source; };
@@ -714,6 +738,9 @@ keyboard@3a { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_1p8>; + pinctrl-0 = <&kybd_default>; pinctrl-names = "default";
@@ -896,6 +923,9 @@ touchscreen@10 { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_1p8>; + pinctrl-0 = <&ts0_default>; pinctrl-names = "default"; };
@@ -1037,6 +1067,19 @@ usb0_3p3_reg_en: usb0-3p3-reg-en-state { }; }; +&pm8550ve_8_gpios { + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio6"; + function = "normal"; + bias-disable; + drive-push-pull; + input-disable; + output-enable; + power-source = <1>; /* 1.8 V */ + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; +}; + &pm8550ve_9_gpios { usb0_1p8_reg_en: usb0-1p8-reg-en-state { pins = "gpio8";