meta/conf/templates: add a blank template
PATCH 1/4 meta/conf/templates: add a blank template
From: Alexander Kanavin <[email protected]>
The default oe-core/poky templates have a number of settings (such as distro and machine) and are thus unsuitable for building up configurations from fragments. This adds a template with an empty local.conf, so that it can be used as the starting point for fragment-driven configuration.
There will also be a blank template in poky; the difference is that this one includes only oe-core and the poky one adds poky layers.
--- .../conf/templates/blank/bblayers.conf.sample | 10 ++++++++++ meta/conf/templates/blank/conf-notes.txt | 19 +++++++++++++++++++ meta/conf/templates/blank/conf-summary.txt | 1 + meta/conf/templates/blank/local.conf.sample | 10 ++++++++++ 4 files changed, 40 insertions(+) create mode 100644 meta/conf/templates/blank/bblayers.conf.sample create mode 100644 meta/conf/templates/blank/conf-notes.txt create mode 100644 meta/conf/templates/blank/conf-summary.txt create mode 100644 meta/conf/templates/blank/local.conf.sample
meta/conf/templates/blank/bblayers.conf.sample new file +10 -0
@@ -0,0 +1,10 @@ +# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +LCONF_VERSION = "7" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ##OEROOT##/meta \ + "
meta/conf/templates/blank/conf-notes.txt new file +19 -0
@@ -0,0 +1,19 @@ + +### Shell environment set up for builds. ### + +You can now run 'bitbake <target>' + +Common targets are: + core-image-minimal + core-image-full-cmdline + core-image-sato + core-image-weston + meta-toolchain + meta-ide-support + +You can also run generated qemu images with a command like 'runqemu qemux86-64'. + +Other commonly useful commands are: + - 'devtool' and 'recipetool' handle common recipe tasks + - 'bitbake-layers' handles common layer tasks + - 'oe-pkgdata-util' handles common target package tasks
meta/conf/templates/blank/conf-summary.txt new file +1 -0
@@ -0,0 +1 @@ +This configuration is empty and is intended as a starting point for adding configuration fragments.
meta/conf/templates/blank/local.conf.sample new file +10 -0
@@ -0,0 +1,10 @@ +# +# This file is intended for local configuration tweaks. It is intentionally +# set up empty, so that configuration can be constructed from fragments +# using bitbake-config-build tool and by setting MACHINE and DISTRO here. +# +# If you would like to publish this file (for example as a bitbake +# configuration template), it is recommended to create fragments +# from changes made here; the only settings that can remain are +# MACHINE and DISTRO. +#
Signature · 1 line
2.39.5
PATCH 2/4 conf/fragments: add fragments for qemux86-64 and qemuarm64
From: Alexander Kanavin <[email protected]>
These will be used by official bitbake-setup configurations, and so let's start with them :) Plenty more fragments can be added over time.
--- meta/conf/fragments/machines/qemuarm64.conf | 5 +++++ meta/conf/fragments/machines/qemux86-64.conf | 5 +++++ 2 files changed, 10 insertions(+) create mode 100644 meta/conf/fragments/machines/qemuarm64.conf create mode 100644 meta/conf/fragments/machines/qemux86-64.conf
meta/conf/fragments/machines/qemuarm64.conf new file +5 -0
@@ -0,0 +1,5 @@ +BB_CONF_FRAGMENT_SUMMARY = "Use qemuarm64 as a target MACHINE, suitable for running in QEMU system emulator." +BB_CONF_FRAGMENT_DESCRIPTION = "Select qemuarm64 as the target machine. This is the best option for running the target system inside QEMU emulator on arm64 build hosts, \ +as it allows near-native performance with kvm acceleration. Also useful for testing arm64 specific assembly code or compiler output." + +MACHINE ?= "qemuarm64"
meta/conf/fragments/machines/qemux86-64.conf new file +5 -0
@@ -0,0 +1,5 @@ +BB_CONF_FRAGMENT_SUMMARY = "Use qemux86-64 as a target MACHINE, suitable for running in QEMU system emulator." +BB_CONF_FRAGMENT_DESCRIPTION = "Select qemux86-64 as the target machine. This is the best option for running the target system inside QEMU emulator on x86-64 build hosts, \ +as it allows near-native performance with kvm acceleration. Also useful for testing x86-64 specific assembly code or compiler output." + +MACHINE ?= "qemux86-64"
Signature · 1 line
2.39.5
PATCH 3/4 conf/fragments: add a fragment for CDN sstate mirror
In reply to Alexander KanavinFrom: Alexander Kanavin <[email protected]>
This will be used in bitbake-setup official configurations and it will be awesome.
--- meta/conf/fragments/yocto/sstate-mirror-cdn.conf | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 meta/conf/fragments/yocto/sstate-mirror-cdn.conf
meta/conf/fragments/yocto/sstate-mirror-cdn.conf new file +12 -0
@@ -0,0 +1,12 @@ +BB_CONF_FRAGMENT_SUMMARY = "Use prebuilt sstate artifacts for standard Yocto build configurations." +BB_CONF_FRAGMENT_DESCRIPTION = "The Yocto Project has prebuilt artefacts available for standard build configurations. \ +This fragment enables their use. This will mean the build will query the \ +the network to check for artefacts at the start of builds, which does slow it down \ +initially but it will then speed up the builds by not having to build things if they are \ +present in the cache. It assumes you can download something faster than you can build it \ +which will depend on your network. \ +Note: For this to work you also need hash-equivalence passthrough to the matching server \ +" + +BB_HASHSERVE_UPSTREAM = 'wss://hashserv.yoctoproject.org/ws' +SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/all/PATH;downloadfilename=PATH"
Signature · 1 line
2.39.5
PATCH 4/4 fragments/qemu: add support for enabling sdl in qemu
In reply to Alexander KanavinFrom: Alexander Kanavin <[email protected]>
This has been the default in poky's local.conf template for a long time, but it's not enabled directly in poky distro. To allow better sstate reuse and a better user experience on a typical laptop (qemu will pop up a graphical window directly), let's add this fragment and enable it in official bitbake-setup configurations.
--- meta/conf/fragments/qemu/enable-native-sdl.conf | 8 ++++++++ 1 file changed, 8 insertions(+) create mode 100644 meta/conf/fragments/qemu/enable-native-sdl.conf
meta/conf/fragments/qemu/enable-native-sdl.conf new file +8 -0
@@ -0,0 +1,8 @@ +BB_CONF_FRAGMENT_SUMMARY = "Enable SDL support for direct graphical output on the build host." +BB_CONF_FRAGMENT_DESCRIPTION = "By default qemu is built with a internal VNC server \ +support. To see graphical output from the guest system, one can use a VNC client to \ +connect to it. This fragment enables Simple Directmedia Layer support, which allows \ +seeing the graphical output from guest directly in a X/Wayland session on the build host machine. \ +" + +PACKAGECONFIG:append:pn-qemu-system-native = " sdl"
Signature · 1 line
2.39.5