linux/bitfield.h: sync <linux/bitfield.h> from Linux 6.15
Subsystems (3)
PATCH v2 1/2 linux/bitfield.h: sync <linux/bitfield.h> from Linux 6.15
Sync bitfield.h header with Linux 6.15 version. Mainly is to permit the introduction of FIELD_PREP_CONST. The bug.h header changed to build_bug.h doesn't cause any regression as we also ship split header similar to how it's done with in Linux.
Signed-off-by Christian Marangi <[email protected]>
---
Changes v2:
- Copy the full file instead of cherry-pick Changes
This is being CI tested on [1]. Locally compile and works on my build system.
[1] https://github.com/u-boot/u-boot/pull/777
include/linux/bitfield.h | 103 ++++++++++++++++++++++++++++----------- 1 file changed, 75 insertions(+), 28 deletions(-)
include/linux/bitfield.h +75 -28
@@ -1,21 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2014 Felix Fietkau <[email protected]> * Copyright (C) 2004 - 2009 Ivo van Doorn <[email protected]> -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 -* as published by the Free Software Foundation -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. */ #ifndef _LINUX_BITFIELD_H#define _LINUX_BITFIELD_H -#include <linux/bug.h> +#include <linux/build_bug.h> #include <asm/byteorder.h> /*
@@ -27,6 +19,9 @@* * Example: * +* #include <linux/bitfield.h> +* #include <linux/bits.h> +* * #define REG_FIELD_A GENMASK(6, 0) * #define REG_FIELD_B BIT(7) * #define REG_FIELD_C GENMASK(15, 8)
@@ -49,20 +44,51 @@#define __bf_shf (x) (__builtin_ffsll(x) - 1) +#define __scalar_type_to_unsigned_cases (type) \ + unsigned type: (unsigned type)0, \ + signed type: (unsigned type)0 + +#define __unsigned_scalar_typeof (x) typeof( \ + _Generic((x), \ + char: (unsigned char)0, \ + __scalar_type_to_unsigned_cases(char), \ + __scalar_type_to_unsigned_cases(short), \ + __scalar_type_to_unsigned_cases(int), \ + __scalar_type_to_unsigned_cases(long), \ + __scalar_type_to_unsigned_cases(long long), \ + default: (x))) + +#define __bf_cast_unsigned (type, x) ((__unsigned_scalar_typeof(type))(x)) +#define __BF_FIELD_CHECK (_mask, _reg, _val, _pfx) \ ({ \ BUILD_BUG_ON_MSG(!__builtin_constant_p(_mask), \ _pfx "mask is not constant"); \ - BUILD_BUG_ON_MSG(!(_mask), _pfx "mask is zero"); \ + BUILD_BUG_ON_MSG((_mask) == 0, _pfx "mask is zero"); \ BUILD_BUG_ON_MSG(__builtin_constant_p(_val) ? \ - ~((_mask) >> __bf_shf(_mask)) & (_val) : 0, \ + ~((_mask) >> __bf_shf(_mask)) & \ + (0 + (_val)) : 0, \ _pfx "value too large for the field"); \ - BUILD_BUG_ON_MSG((_mask) > (typeof(_reg))~0ull, \ + BUILD_BUG_ON_MSG(__bf_cast_unsigned(_mask, _mask) > \ + __bf_cast_unsigned(_reg, ~0ull), \ _pfx "type of reg too small for mask"); \ __BUILD_BUG_ON_NOT_POWER_OF_2((_mask) + \ (1ULL << __bf_shf(_mask))); \ }) +/** +* FIELD_MAX() - produce the maximum value representable by a field +* @_mask: shifted mask defining the field's length and position +* +* FIELD_MAX() returns the maximum value that can be held in the field +* specified by @_mask. +*/ +#define FIELD_MAX (_mask) \ + ({ \ + __BF_FIELD_CHECK(_mask, 0ULL, 0ULL, "FIELD_MAX: "); \ + (typeof(_mask))((_mask) >> __bf_shf(_mask)); \ + }) +/** * FIELD_FIT() - check if value fits in the field * @_mask: shifted mask defining the field's length and position
@@ -72,7 +98,7 @@*/ #define FIELD_FIT (_mask, _val) \ ({ \ - __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_FIT: "); \ + __BF_FIELD_CHECK(_mask, 0ULL, 0ULL, "FIELD_FIT: "); \ !((((typeof(_mask))_val) << __bf_shf(_mask)) & ~(_mask)); \ })
@@ -90,10 +116,36 @@ ((typeof (_mask))(_val) <<__bf_shf (_mask)) & (_mask); \ }) +#define __BF_CHECK_POW2 (n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) + +/** +* FIELD_PREP_CONST() - prepare a constant bitfield element +* @_mask: shifted mask defining the field's length and position +* @_val: value to put in the field +* +* FIELD_PREP_CONST() masks and shifts up the value. The result should +* be combined with other fields of the bitfield using logical OR. +* +* Unlike FIELD_PREP() this is a constant expression and can therefore +* be used in initializers. Error checking is less comfortable for this +* version, and non-constant masks cannot be used. +*/ +#define FIELD_PREP_CONST (_mask, _val) \ + ( \ +/* mask must be non-zero */ \ +BUILD_BUG_ON_ZERO ((_mask) ==0 ) + \ +/* check if value fits */ \ +BUILD_BUG_ON_ZERO (~((_mask) >>__bf_shf (_mask)) & (_val)) + \ +/* check if mask is contiguous */ \ +__BF_CHECK_POW2 ((_mask) + (1ULL <<__bf_shf (_mask))) + \ +/* and create the value */ \ + (((typeof (_mask))(_val) <<__bf_shf (_mask)) & (_mask)) \ + ) +/** * FIELD_GET() - extract a bitfield element * @_mask: shifted mask defining the field's length and position -* @_reg: 32bit value of entire bitfield +* @_reg: value of entire bitfield * * FIELD_GET() extracts the field specified by @_mask from the * bitfield passed in as @_reg by masking and shifting it down.
@@ -108,20 +160,18 @@ extern void __compiletime_error("value doesn't fit into mask")__field_overflow (void); extern void __compiletime_error("bad bitfield mask")__bad_mask (void); - static __always_inline u64 field_multiplier(u64 field) {if ((field | (field -1 )) & ((field | (field -1 )) +1 ))__bad_mask ();return field & -field; } - static __always_inline u64 field_mask(u64 field) {return field /field_multiplier (field); } - -#define ____MAKE_OP (type, base, to, from) \ +#define field_max (field) ((typeof(field))field_mask(field)) +#define ____MAKE_OP (type,base,to,from) \ static __always_inline __##type type##_encode_bits(base v, base field) \ { \ if (__builtin_constant_p(v) && (v & ~field_mask(field))) \
@@ -133,26 +183,23 @@ static __always_inline __##type type##_replace_bits(__##type old, \ { \ return (old & ~to(field)) | type##_encode_bits(val, field); \ } \ -static __always_inline void type##p_replace_bits(__##type * p, \ +static __always_inline void type##p_replace_bits(__##type *p, \ base val, base field) \ { \ *p = (*p & ~to(field)) | type##_encode_bits(val, field); \ } \ static __always_inline base type##_get_bits(__##type v, base field) \ { \ - return (from(v) & field) / field_multiplier(field); \ + return (from(v) & field)/field_multiplier(field); \ } -#define __MAKE_OP (size) \ - ____MAKE_OP(le##size, u##size, cpu_to_le##size, le##size##_to_cpu) \ - ____MAKE_OP(be##size, u##size, cpu_to_be##size, be##size##_to_cpu) \ - ____MAKE_OP(u##size, u##size, ,) - -____MAKE_OP(u8, u8, ,) + ____MAKE_OP(le##size,u##size,cpu_to_le##size,le##size##_to_cpu) \ + ____MAKE_OP(be##size,u##size,cpu_to_be##size,be##size##_to_cpu) \ + ____MAKE_OP(u##size,u##size,,) +____MAKE_OP(u8,u8,,) __MAKE_OP(16) __MAKE_OP(32) __MAKE_OP(64) - #undef __MAKE_OP #undef ____MAKE_OP
Signature · 1 line
2.48.1
PATCH v2 2/2 mtd: spinand: winbond: add Winbond W25N04KV flash support
Add Winbond W25N04KV flash support that use a different value to detect ECC bitflip.
Signed-off-by Christian Marangi <[email protected]>
--- drivers/mtd/nand/spi/winbond.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
drivers/mtd/nand/spi/winbond.c +13 -0
@@ -11,6 +11,7 @@#include <linux/device.h> #include <linux/kernel.h> #endif +#include <linux/bitfield.h> #include <linux/bug.h> #include <linux/mtd/spinand.h>
@@ -18,6 +19,8 @@#define WINBOND_CFG_BUF_READ BIT(3) +#define W25N04KV_STATUS_ECC_5_8_BITFLIPS FIELD_PREP_CONST(STATUS_ECC_MASK, 0x3) + static SPINAND_OP_VARIANTS(read_cache_variants, SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0), SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -121,6 +124,7 @@ static int w25n02kv_ecc_get_status(struct spinand_device *spinand,return -EBADMSG ;case STATUS_ECC_HAS_BITFLIPS : +case W25N04KV_STATUS_ECC_5_8_BITFLIPS :/* * Let's try to retrieve the real maximum number of bitflips * in order to avoid forcing the wear-leveling layer to move
@@ -172,6 +176,15 @@ static const struct spinand_info winbond_spinand_table[] = { &update_cache_variants), 0, SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)), +SPINAND_INFO ("W25N04KV" , +SPINAND_ID (SPINAND_READID_METHOD_OPCODE_DUMMY ,0xaa ,0x23 ), +NAND_MEMORG (1 ,2048 ,128 ,64 ,4096 ,40 ,2 ,1 ,1 ), +NAND_ECCREQ (8 ,512 ), +SPINAND_INFO_OP_VARIANTS (&read_cache_variants, + &write_cache_variants, + &update_cache_variants), +0 , + SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)), };static int winbond_spinand_init (struct spinand_device *spinand)
Signature · 1 line
2.48.1