ARM: dts: aspeed: Add device tree for Nvidia's GB200 UT3.0b platform BMC
Subsystems (2)
v3 cover ARM: dts: aspeed: Add device tree for Nvidia's GB200 UT3.0b platform BMC
Fixed whitespace issues
Fixed schema validation issues from my end, but there are still issues with the aspeed dtsi file that are not related to this new dts Reordered to follow style guide
Removed redundant status okays
Donald Shannon (1):
ARM: dts: aspeed: Add device tree for Nvidia's GB200 UT3.0b platform
BMC
arch/arm/boot/dts/aspeed/Makefile | 1 + .../aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts | 1125 +++++++++++++++++ 2 files changed, 1126 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts
Signature · 1 line
2.43.0
PATCH v3 1/1 ARM: dts: aspeed: Add device tree for Nvidia's GB200 UT3.0b platform BMC
The GB200NVL UT3.0b BMC is an Aspeed Ast2600 based BMC for Nvidia Blackwell GB200NVL platform. Reference to Ast2600 SOC [1].
Reference to Blackwell GB200NVL Platform [2].
--- arch/arm/boot/dts/aspeed/Makefile | 1 + .../aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts | 1125 +++++++++++++++++ 2 files changed, 1126 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts
arch/arm/boot/dts/aspeed/Makefile +1 -0
@@ -51,6 +51,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-lenovo-hr855xg2.dtb \ aspeed-bmc-microsoft-olympus.dtb \ aspeed-bmc-nvidia-gb200nvl-bmc.dtb \ + aspeed-bmc-nvidia-gb200-ut30b.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-mowgli.dtb \ aspeed-bmc-opp-nicole.dtb \
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts new file +1125 -0
1,125 lines not on this page · raw message
Signature · 1 line
2.43.0
Quoted 34 lines · Donald Shannon
The GB200NVL UT3.0b BMC is an Aspeed Ast2600 based BMC for Nvidia Blackwell GB200NVL platform. Reference to Ast2600 SOC [1].
Reference to Blackwell GB200NVL Platform [2].Signed-off-by Donald Shannon <[email protected]>--- arch/arm/boot/dts/aspeed/Makefile | 1 + .../aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts | 1125 +++++++++++++++++ 2 files changed, 1126 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtsarch/arm/boot/dts/aspeed/Makefile +1
-0@@ -51,6 +51,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-lenovo-hr855xg2.dtb \ aspeed-bmc-microsoft-olympus.dtb \ aspeed-bmc-nvidia-gb200nvl-bmc.dtb \ + aspeed-bmc-nvidia-gb200-ut30b.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-mowgli.dtb \ aspeed-bmc-opp-nicole.dtb \arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts new file +1
-0@@ -0,0 +1,1125 @@ +// SPDX-License-Identifier: GPL-2.0+
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts line 11
Quoted 10 lines
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts new file +10
-0+/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "AST2600 GB200 UT3.0b BMC"; + compatible = "nvidia,gb200nvl-bmc", "aspeed,ast2600";
Nothing improved.
Also, where is the changelog (see submitting patches)?
Best regards,
Krzysztof