sntp for NET_LWIP
v2 cover sntp for NET_LWIP
Implement the sntp command with lwIP (CONFIG_NET_LWIP=y). SNTP is supported as an app in lib/lwip/lwip/src/apps/sntp/sntp.c so this is mainly about adding that file to the build and writing do_sntp() to use the sntp_*() API and run the receive & timer loop. There is a patch to extract a small bit of common code from net/sntp.c to avoid duplication. The QEMU arm64 lwIP defconfig is updated to provide the sntp command by default for convenience.
I could not test the case when the NTP server IP is provided by DHCP. If someone has access right away to such a configuration and in case it does not work, please let me know.
Changes in v2:
- Move the network commands from net/lwip to cmd/lwip. Some commands such as dns and ping can be moved entirely, others such as dhcp, tftp and wget need to remain partly in net/lwip because the protocol may be used even when the command is not enabled.
- ping, sntp: accept host names in addtion to IP addresses
- Update doc/README.sntp
Jerome Forissier (13):
lwip: remove net/lwip/eth_internal.h
lwip: split cmd/net-lwip.c into one file per command
lwip: split net/lwip/wget.c
lwip: move net/lwip/dns.c to cmd/lwip
lwip: move net/lwip/ping.c to cmd/lwip
lwip: dns: do not return CMD_RET_FAILURE on successful resolution
lwip: dns: do not print IP address when a variable is specified
lwip: add net_lwip_dns_resolve()
lwip: ping: accept host name when CONFIG_CMD_DNS=y
net: extract function net_sntp_set_rtc() from sntp_handler()
lwip: add sntp command
Update doc/README.SNTP
configs: qemu_arm64_lwip_defconfig: enable CMD_SNTP
MAINTAINERS | 1 +
cmd/Kconfig | 13 +-
cmd/Makefile | 2 +-
cmd/lwip/Makefile | 6 +
cmd/lwip/dhcp.c | 9 ++
{net => cmd}/lwip/dns.c | 14 +-
{net => cmd}/lwip/ping.c | 9 +-
cmd/lwip/sntp.c | 133 ++++++++++++++++++
cmd/lwip/tftp.c | 9 ++
cmd/lwip/wget.c | 218 ++++++++++++++++++++++++++++++
cmd/net-lwip.c | 50 -------
configs/qemu_arm64_lwip_defconfig | 1 +
doc/README.SNTP | 23 +++-
include/net-common.h | 13 ++
include/net-lwip.h | 14 ++
lib/lwip/Makefile | 1 +
lib/lwip/u-boot/arch/cc.h | 4 +
lib/lwip/u-boot/lwipopts.h | 4 +
net/lwip/Makefile | 2 -
net/lwip/eth_internal.h | 35 -----
net/lwip/net-lwip.c | 39 ++++++
net/lwip/wget.c | 206 +---------------------------
net/net-common.c | 23 ++++
net/sntp.c | 23 +---
24 files changed, 522 insertions(+), 330 deletions(-)
create mode 100644 cmd/lwip/Makefile
create mode 100644 cmd/lwip/dhcp.c
rename {net => cmd}/lwip/dns.c (88%)
rename {net => cmd}/lwip/ping.c (94%)
create mode 100644 cmd/lwip/sntp.c
create mode 100644 cmd/lwip/tftp.c
create mode 100644 cmd/lwip/wget.c
delete mode 100644 cmd/net-lwip.c
delete mode 100644 net/lwip/eth_internal.hSignature · 4 lines
2.43.0 base-commit: fdc0dcbb2c84c4c63fc10315bcf042575198610d branch: lwip-sntp-v2
PATCH v2 1/13 lwip: remove net/lwip/eth_internal.h
net/lwip/eth_internal.h is not used. Remove it.
---
Changes in v2:
- New patch
net/lwip/eth_internal.h | 35 ----------------------------------- 1 file changed, 35 deletions(-) delete mode 100644 net/lwip/eth_internal.h
net/lwip/eth_internal.h deleted +0 -35
@@ -1,35 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* (C) Copyright 2001-2015 -* Wolfgang Denk, DENX Software Engineering, [email protected]. -* Joe Hershberger, National Instruments -*/ - -#ifndef __ETH_INTERNAL_H -#define __ETH_INTERNAL_H - -/* Do init that is common to driver model and legacy networking */ -void eth_common_init (void ); - -/** -* eth_env_set_enetaddr_by_index() - set the MAC address environment variable -* -* This sets up an environment variable with the given MAC address (@enetaddr). -* The environment variable to be set is defined by <@base_name><@index>addr. -* If @index is 0 it is omitted. For common Ethernet this means ethaddr, -* eth1addr, etc. -* -* @base_name: Base name for variable, typically "eth" -* @index: Index of interface being updated (>=0) -* @enetaddr: Pointer to MAC address to put into the variable -* Return: 0 if OK, other value on error -*/ -int eth_env_set_enetaddr_by_index (const char *base_name,int index, -uchar *enetaddr); - -int eth_mac_skip (int index); -void eth_current_changed (void ); -void eth_set_dev (struct udevice *dev); -void eth_set_current_to_next (void ); - -#endif
Signature · 1 line
2.43.0
PATCH v2 2/13 lwip: split cmd/net-lwip.c into one file per command
In reply to Jerome ForissierMove each command in cmd/net-lwip.c into its own file (cmd/lwip/${cmd}.c).
---
Changes in v2:
- New patch
MAINTAINERS | 1 +
cmd/Makefile | 2 +-
cmd/lwip/Makefile | 5 +++++
cmd/lwip/dhcp.c | 9 +++++++++
cmd/lwip/dns.c | 8 ++++++++
cmd/lwip/ping.c | 8 ++++++++
cmd/lwip/tftp.c | 9 +++++++++
cmd/{net-lwip.c => lwip/wget.c} | 26 +-------------------------
8 files changed, 42 insertions(+), 26 deletions(-)
create mode 100644 cmd/lwip/Makefile
create mode 100644 cmd/lwip/dhcp.c
create mode 100644 cmd/lwip/dns.c
create mode 100644 cmd/lwip/ping.c
create mode 100644 cmd/lwip/tftp.c
rename cmd/{net-lwip.c => lwip/wget.c} (51%)MAINTAINERS +1 -0
@@ -1409,6 +1409,7 @@ F: net/ NETWORK (LWIP) M: Jerome Forissier <[email protected]> S: Maintained +F: cmd/lwip/ F: cmd/net-lwip.c F: configs/qemu_arm64_lwip_defconfig F: drivers/net/sandbox-lwip.c
cmd/Makefile +1 -1
@@ -133,7 +133,7 @@ obj-$(CONFIG_CMD_NAND) += nand.o ifdef CONFIG_NET obj-$(CONFIG_CMD_NET) += net.o net-common.o else ifdef CONFIG_NET_LWIP -obj-$(CONFIG_CMD_NET) += net-lwip.o net-common.o +obj-$(CONFIG_CMD_NET) += lwip/ net-common.o endif obj-$(CONFIG_ENV_SUPPORT) += nvedit.o obj-$(CONFIG_CMD_NVEDIT_EFI) += nvedit_efi.o
cmd/lwip/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +obj-$(CONFIG_CMD_DHCP) += dhcp.o +obj-$(CONFIG_CMD_DNS) += dns.o +obj-$(CONFIG_CMD_PING) += ping.o +obj-$(CONFIG_CMD_TFTPBOOT) += tftp.o +obj-$(CONFIG_CMD_WGET) += wget.o
cmd/lwip/dhcp.c new file +9 -0
@@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2024-2025 Linaro Ltd. */ + +#include <command.h> +#include <net.h> + +U_BOOT_CMD (dhcp,3 ,1 , do_dhcp, +"boot image via network using DHCP/TFTP protocol" , +"[loadAddress] [[hostIPaddr:]bootfilename]" );
cmd/lwip/dns.c new file +8 -0
@@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2024-2025 Linaro Ltd. */ + +#include <command.h> +#include <net.h> + +U_BOOT_CMD (dns,3 ,1 , do_dns,"lookup the IP of a hostname" , +"hostname [envvar]" );
cmd/lwip/ping.c new file +8 -0
@@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2024-2025 Linaro Ltd. */ + +#include <command.h> +#include <net.h> + +U_BOOT_CMD (ping,2 ,1 , do_ping,"send ICMP ECHO_REQUEST to network host" , +"pingAddress" );
cmd/lwip/tftp.c new file +9 -0
@@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2024-2025 Linaro Ltd. */ + +#include <command.h> +#include <net.h> + +U_BOOT_CMD (tftpboot,3 ,0 , do_tftpb, +"boot image via network using TFTP protocol" , +"[loadAddress] [[hostIPaddr:]bootfilename]" );
cmd/lwip/wget.c renamed from cmd/net-lwip.c +1 -25
@@ -1,32 +1,9 @@// SPDX-License-Identifier: GPL-2.0+ -/* Copyright (C) 2024 Linaro Ltd. */ +/* Copyright (C) 2024-2025 Linaro Ltd. */ #include <command.h> #include <net.h> -#if defined(CONFIG_CMD_DHCP ) -U_BOOT_CMD (dhcp,3 ,1 , do_dhcp, -"boot image via network using DHCP/TFTP protocol" , -"[loadAddress] [[hostIPaddr:]bootfilename]" ); -#endif - -#if defined(CONFIG_CMD_PING ) -U_BOOT_CMD (ping,2 ,1 , do_ping,"send ICMP ECHO_REQUEST to network host" , -"pingAddress" ); -#endif - -#if defined(CONFIG_CMD_TFTPBOOT ) -U_BOOT_CMD (tftpboot,3 ,0 , do_tftpb, -"boot image via network using TFTP protocol" , -"[loadAddress] [[hostIPaddr:]bootfilename]" ); -#endif - -#if defined(CONFIG_CMD_DNS ) -U_BOOT_CMD (dns,3 ,1 , do_dns,"lookup the IP of a hostname" , -"hostname [envvar]" ); -#endif - -#if defined(CONFIG_CMD_WGET )U_BOOT_CMD (wget,4 ,1 , do_wget,"boot image via network using HTTP/HTTPS protocol" #if defined(CONFIG_WGET_CACERT)
@@ -47,4 +24,3 @@ U_BOOT_CMD(wget, 4, 1, do_wget,#endif #endif ); -#endif
Signature · 1 line
2.43.0
Re: [PATCH v2 02/13] lwip: split cmd/net-lwip.c into one file per command
Quoted 5 lines · Jerome Forissier
Move each command in
cmd/net-lwip.cinto its own file (cmd/lwip/${cmd}.c).Suggested-by Heinrich Schuchardt <[email protected]>Signed-off-by Jerome Forissier <[email protected]>
Signature · 1 line
Tom
PATCH v2 3/13 lwip: split net/lwip/wget.c
In reply to Jerome ForissierSplit net/lwip/wget.c in two: one part which implements CONFIG_WGET stays in net/ while the part that implements CONFIG_CMD_WGET is moved into cmd/.
---
Changes in v2:
- New patch
cmd/lwip/wget.c | 192 ++++++++++++++++++++++++++++++++++++++++++ include/net-lwip.h | 13 +++ net/lwip/wget.c | 206 +-------------------------------------------- 3 files changed, 209 insertions(+), 202 deletions(-)
cmd/lwip/wget.c +192 -0
@@ -2,7 +2,9 @@/* Copyright (C) 2024-2025 Linaro Ltd. */ #include <command.h> +#include <image.h> #include <net.h> +#include <lwip/altcp_tls.h> U_BOOT_CMD (wget,4 ,1 , do_wget, "boot image via network using HTTP/HTTPS protocol"
@@ -24,3 +26,193 @@ U_BOOT_CMD(wget, 4, 1, do_wget,#endif #endif ); + +#if CONFIG_IS_ENABLED (WGET_CACERT ) +char *cacert; +size_t cacert_size; +enum auth_mode cacert_auth_mode =AUTH_OPTIONAL ; + +static int set_auth (enum auth_mode auth) +{ + cacert_auth_mode = auth; + +return CMD_RET_SUCCESS ; +} + +#if CONFIG_IS_ENABLED (WGET_BUILTIN_CACERT ) +static const char builtin_cacert[]; +static const size_t builtin_cacert_size; +static bool cacert_initialized; +#endif + +static int _set_cacert (const void *addr,size_t sz) +{ +mbedtls_x509_crt crt; +void *p; +int ret; + +if (cacert) +free (cacert); + +if (!addr) { + cacert =NULL ; + cacert_size =0 ; +return CMD_RET_SUCCESS ; + } + + p =malloc (sz); +if (!p) +return CMD_RET_FAILURE ; + cacert = p; + cacert_size = sz; + +memcpy (cacert, (void *)addr, sz); + +mbedtls_x509_crt_init (&crt); + ret =mbedtls_x509_crt_parse (&crt, cacert, cacert_size); +if (ret) { +if (!wget_info->silent) +printf ("Could not parse certificates (%d)\n" , ret); +free (cacert); + cacert =NULL ; + cacert_size =0 ; +return CMD_RET_FAILURE ; + } + +#if CONFIG_IS_ENABLED (WGET_BUILTIN_CACERT ) + cacert_initialized = true; +#endif +return CMD_RET_SUCCESS ; +} + +#if CONFIG_IS_ENABLED (WGET_BUILTIN_CACERT ) +static int set_cacert_builtin (void ) +{ +return _set_cacert (builtin_cacert, builtin_cacert_size); +} +#endif + +static int set_cacert (char *const saddr,char *const ssz) +{ +ulong addr, sz; + + addr =hextoul (saddr,NULL ); + sz =hextoul (ssz,NULL ); + +return _set_cacert ((void *)addr, sz); +} +#endif /* CONFIG_WGET_CACERT */ + +/* +* Legacy syntax support +* Convert [<server_name_or_ip>:]filename into a URL if needed +*/ +static int parse_legacy_arg (char *arg,char *nurl,size_t rem) +{ +char *p = nurl; +size_t n; +char *col =strchr (arg,':' ); +char *env; +char *server; +char *path; + +if (strstr (arg,"http" ) == arg) { + n =snprintf (nurl, rem,"%s" , arg); +if (n <0 || n > rem) +return -1 ; +return 0 ; + } + + n =snprintf (p, rem,"%s" ,"http://" ); +if (n <0 || n > rem) +return -1 ; + p += n; + rem -= n; + +if (col) { + n = col - arg; + server = arg; + path = col +1 ; + }else { + env =env_get ("httpserverip" ); +if (!env) + env =env_get ("serverip" ); +if (!env) { +log_err ("error: httpserver/serverip has to be set\n" ); +return -1 ; + } + n =strlen (env); + server = env; + path = arg; + } + +if (rem < n) +return -1 ; +strncpy (p, server, n); + p += n; + rem -= n; +if (rem <1 ) +return -1 ; + *p ='/' ; + p++; + rem--; + n =strlen (path); +if (rem < n) +return -1 ; +strncpy (p, path, n); + p += n; + rem -= n; +if (rem <1 ) +return -1 ; + *p ='\0' ; + +return 0 ; +} + +int do_wget (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]) +{ +char *end; +char *url; +ulong dst_addr; +char nurl[1024 ]; + +#if CONFIG_IS_ENABLED (WGET_CACERT ) +if (argc ==4 && !strncmp (argv[1 ],"cacert" ,strlen ("cacert" ))) +return set_cacert (argv[2 ], argv[3 ]); +if (argc ==3 && !strncmp (argv[1 ],"cacert" ,strlen ("cacert" ))) { +#if CONFIG_IS_ENABLED (WGET_BUILTIN_CACERT ) +if (!strncmp (argv[2 ],"builtin" ,strlen ("builtin" ))) +return set_cacert_builtin (); +#endif +if (!strncmp (argv[2 ],"none" ,strlen ("none" ))) +return set_auth (AUTH_NONE ); +if (!strncmp (argv[2 ],"optional" ,strlen ("optional" ))) +return set_auth (AUTH_OPTIONAL ); +if (!strncmp (argv[2 ],"required" ,strlen ("required" ))) +return set_auth (AUTH_REQUIRED ); +return CMD_RET_USAGE ; + } +#endif + +if (argc <2 || argc >3 ) +return CMD_RET_USAGE ; + + dst_addr =hextoul (argv[1 ], &end); +if (end == (argv[1 ] +strlen (argv[1 ]))) { +if (argc <3 ) +return CMD_RET_USAGE ; + url = argv[2 ]; + }else { + dst_addr = image_load_addr; + url = argv[1 ]; + } + +if (parse_legacy_arg (url, nurl,sizeof (nurl))) +return CMD_RET_FAILURE ; + + wget_info = &default_wget_info; +if (wget_do_request (dst_addr, nurl)) +return CMD_RET_FAILURE ; + +return CMD_RET_SUCCESS ; +}
include/net-lwip.h +13 -0
@@ -6,6 +6,19 @@#include <lwip/ip4.h> #include <lwip/netif.h> +#if CONFIG_IS_ENABLED (WGET_CACERT ) +/* HTTPS authentication mode */ +enum auth_mode { +AUTH_NONE , +AUTH_OPTIONAL , +AUTH_REQUIRED , +}; + +extern char *cacert; +extern size_t cacert_size; +extern enum auth_mode cacert_auth_mode; +#endif +enum proto_t {TFTPGET };
net/lwip/wget.c +4 -202
246 lines not on this page · raw message
Signature · 1 line
2.43.0
Re: [PATCH v2 03/13] lwip: split net/lwip/wget.c
Quoted 5 lines · Jerome Forissier
Split
net/lwip/wget.cin two: one part which implementsCONFIG_WGETstays innet/while the part that implementsCONFIG_CMD_WGETis moved into cmd/.Signed-off-by Jerome Forissier <[email protected]>
[snip]
Quoted 10 lines
include/net-lwip.h +2
-0@@ -6,6 +6,19 @@#include <lwip/ip4.h> #include <lwip/netif.h> +#if CONFIG_IS_ENABLED (WGET_CACERT ) +/* HTTPS authentication mode */
include/net-lwip.h line 20
Quoted 10 lines
include/net-lwip.h +10
-0+enum auth_mode { +AUTH_NONE , +AUTH_OPTIONAL , +AUTH_REQUIRED , +}; + +extern char *cacert; +extern size_t cacert_size; +extern enum auth_mode cacert_auth_mode; +#endif
Since we aren't going to run in to compile problems elsewhere because these are in the header file (IOW we don't reference CONFIG symbols which might not be set), we shouldn't guard these here. In general it's an anti-pattern because it makes it harder to do:
if (IS_ENABLED(CONFIG_FOO)) { ... }
in code. Thanks.
Signature · 1 line
Tom
PATCH v2 4/13 lwip: move net/lwip/dns.c to cmd/lwip
In reply to Jerome ForissierMove the implementation of the dns command under cmd/.
---
Changes in v2:
- New patch
cmd/lwip/dns.c | 123 ++++++++++++++++++++++++++++++++++++++++++++ net/lwip/Makefile | 1 - net/lwip/dns.c | 128 ---------------------------------------------- 3 files changed, 123 insertions(+), 129 deletions(-) delete mode 100644 net/lwip/dns.c
cmd/lwip/dns.c +123 -0
@@ -2,7 +2,130 @@/* Copyright (C) 2024-2025 Linaro Ltd. */ #include <command.h> +#include <console.h> +#include <lwip/dns.h> +#include <lwip/timeouts.h> #include <net.h> +#include <time.h> U_BOOT_CMD (dns,3 ,1 , do_dns,"lookup the IP of a hostname" ,"hostname [envvar]" ); + +#define DNS_RESEND_MS 1000 +#define DNS_TIMEOUT_MS 10000 + +struct dns_cb_arg { +ip_addr_t host_ipaddr; +const char *var; +bool done; +}; + +static void do_dns_tmr (void *arg) +{ +dns_tmr (); +} + +static void dns_cb (const char *name,const ip_addr_t *ipaddr,void *arg) +{ +struct dns_cb_arg *dns_cb_arg = arg; +char *ipstr =ip4addr_ntoa (ipaddr); + + dns_cb_arg->done = true; + +if (!ipaddr) { +printf ("DNS: host not found\n" ); + dns_cb_arg->host_ipaddr.addr =0 ; +return ; + } + +if (dns_cb_arg->var) +env_set (dns_cb_arg->var, ipstr); + +printf ("%s\n" , ipstr); +} + +static int dns_loop (struct udevice *udev,const char *name,const char *var) +{ +struct dns_cb_arg dns_cb_arg = { }; +bool has_server = false; +struct netif *netif; +ip_addr_t ipaddr; +ip_addr_t ns; +ulong start; +char *nsenv; +int ret; + + dns_cb_arg.var = var; + + netif =net_lwip_new_netif (udev); +if (!netif) +return CMD_RET_FAILURE ; + +dns_init (); + + nsenv =env_get ("dnsip" ); +if (nsenv &&ipaddr_aton (nsenv, &ns)) { +dns_setserver (0 , &ns); + has_server = true; + } + + nsenv =env_get ("dnsip2" ); +if (nsenv &&ipaddr_aton (nsenv, &ns)) { +dns_setserver (1 , &ns); + has_server = true; + } + +if (!has_server) { +log_err ("No valid name server (dnsip/dnsip2)\n" ); +net_lwip_remove_netif (netif); +return CMD_RET_FAILURE ; + } + + dns_cb_arg.done = false; + + ret =dns_gethostbyname (name, &ipaddr, dns_cb, &dns_cb_arg); + +if (ret ==ERR_OK ) { +dns_cb (name, &ipaddr, &dns_cb_arg); + }else if (ret ==ERR_INPROGRESS ) { + start =get_timer (0 ); +sys_timeout (DNS_RESEND_MS , do_dns_tmr,NULL ); +do { +net_lwip_rx (udev, netif); +if (dns_cb_arg.done) +break ; +sys_check_timeouts (); +if (ctrlc ()) { +printf ("\nAbort\n" ); +break ; + } + }while (get_timer (start) <DNS_TIMEOUT_MS ); +sys_untimeout (do_dns_tmr,NULL ); + } + +net_lwip_remove_netif (netif); + +if (dns_cb_arg.done && dns_cb_arg.host_ipaddr.addr !=0 ) +return CMD_RET_SUCCESS ; + +return CMD_RET_FAILURE ; +} + +int do_dns (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]) +{ +char *name; +char *var =NULL ; + +if (argc ==1 || argc >3 ) +return CMD_RET_USAGE ; + + name = argv[1 ]; + +if (argc ==3 ) + var = argv[2 ]; + +if (net_lwip_eth_start () <0 ) +return CMD_RET_FAILURE ; + +return dns_loop (eth_get_dev (), name, var); +}
net/lwip/Makefile +0 -1
@@ -2,7 +2,6 @@ ccflags-y += -I$(srctree)/lib/lwip/lwip/src/include -I$(srctree)/lib/lwip/u-boot obj-$(CONFIG_$(PHASE_)DM_ETH) += net-lwip.o obj-$(CONFIG_CMD_DHCP) += dhcp.o -obj-$(CONFIG_CMD_DNS) += dns.o obj-$(CONFIG_CMD_PING) += ping.o obj-$(CONFIG_CMD_TFTPBOOT) += tftp.o obj-$(CONFIG_WGET) += wget.o
net/lwip/dns.c deleted +0 -128
128 lines not on this page · raw message
Signature · 1 line
2.43.0
Re: [PATCH v2 04/13] lwip: move net/lwip/dns.c to cmd/lwip
Quoted 5 lines · Jerome Forissier
Move the implementation of the dns command under cmd/.
Signed-off-by Jerome Forissier <[email protected]>---
Quoted 8 lines
Changes in v2:
- New patchcmd/lwip/dns.c | 123 ++++++++++++++++++++++++++++++++++++++++++++ net/lwip/Makefile | 1 - net/lwip/dns.c | 128 ---------------------------------------------- 3 files changed, 123 insertions(+), 129 deletions(-) delete mode 100644 net/lwip/dns.c
I assume this is copy/paste from the previous file to the new file. Since I've asked for other changes, maybe if you do the move then split cmd/net-lwip.c up git will more clearly see this as a move? I think you you reword the commits with "Prepare to split $cmd from cmd/net-lwip.c by moving ..." it will be sufficiently clear in the logs why there's a short time of not strictly cmd code in cmd/lwip/. Thanks!
Signature · 1 line
Tom
PATCH v2 5/13 lwip: move net/lwip/ping.c to cmd/lwip
In reply to Jerome ForissierMove the implementation of the ping command under cmd/.
---
Changes in v2:
- New patch
cmd/lwip/ping.c | 175 ++++++++++++++++++++++++++++++++++++++++++++ net/lwip/Makefile | 1 - net/lwip/ping.c | 180 ---------------------------------------------- 3 files changed, 175 insertions(+), 181 deletions(-) delete mode 100644 net/lwip/ping.c
cmd/lwip/ping.c +175 -0
@@ -2,7 +2,182 @@/* Copyright (C) 2024-2025 Linaro Ltd. */ #include <command.h> +#include <console.h> +#include <dm/device.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <lwip/icmp.h> +#include <lwip/inet_chksum.h> +#include <lwip/raw.h> +#include <lwip/timeouts.h> #include <net.h> +#include <time.h> U_BOOT_CMD (ping,2 ,1 , do_ping,"send ICMP ECHO_REQUEST to network host" ,"pingAddress" ); + +#define PING_DELAY_MS 1000 +#define PING_COUNT 5 +/* Ping identifier - must fit on a u16_t */ +#define PING_ID 0xAFAF + +struct ping_ctx { +ip_addr_t target; +struct raw_pcb *pcb; +struct icmp_echo_hdr *iecho; +u16 seq_num; +bool alive; +}; + +static u8_t ping_recv (void *arg,struct raw_pcb *pcb,struct pbuf *p, +const ip_addr_t *addr) +{ +struct ping_ctx *ctx = arg; +struct icmp_echo_hdr *iecho = ctx->iecho; + +if (addr->addr != ctx->target.addr) +return 0 ; + +if ((p->tot_len >= (IP_HLEN +sizeof (struct icmp_echo_hdr ))) && +pbuf_remove_header (p,IP_HLEN ) ==0 ) { + iecho = (struct icmp_echo_hdr *)p->payload; + +if (iecho->id ==PING_ID && + iecho->seqno ==lwip_htons (ctx->seq_num)) { + ctx->alive = true; +printf ("host %s is alive\n" ,ipaddr_ntoa (addr)); +pbuf_free (p); +return 1 ;/* eat the packet */ + } +/* not eaten, restore original packet */ +pbuf_add_header (p,IP_HLEN ); + } + +return 0 ;/* don't eat the packet */ +} + +static int ping_raw_init (struct ping_ctx *ctx) +{ + ctx->pcb =raw_new (IP_PROTO_ICMP ); +if (!ctx->pcb) +return -ENOMEM ; + +raw_recv (ctx->pcb, ping_recv, ctx); +raw_bind (ctx->pcb,IP_ADDR_ANY ); + +return 0 ; +} + +static void ping_raw_stop (struct ping_ctx *ctx) +{ +if (ctx->pcb) +raw_remove (ctx->pcb); +} + +static void ping_prepare_echo (struct ping_ctx *ctx) +{ +struct icmp_echo_hdr *iecho = ctx->iecho; + +ICMPH_TYPE_SET (iecho,ICMP_ECHO ); +ICMPH_CODE_SET (iecho,0 ); + iecho->chksum =0 ; + iecho->id =PING_ID ; + iecho->seqno =lwip_htons (ctx->seq_num); + + iecho->chksum =inet_chksum (iecho,sizeof (*iecho)); +} + +static void ping_send_icmp (struct ping_ctx *ctx) +{ +struct pbuf *p; +size_t ping_size =sizeof (struct icmp_echo_hdr ); + + p =pbuf_alloc (PBUF_IP , (u16_t )ping_size,PBUF_RAM ); +if (!p) +return ; + +if (p->len == p->tot_len && !p->next) { + ctx->iecho = (struct icmp_echo_hdr *)p->payload; +ping_prepare_echo (ctx); +raw_sendto (ctx->pcb, p, &ctx->target); + } + +pbuf_free (p); +} + +static void ping_send (void *arg) +{ +struct ping_ctx *ctx = arg; + + ctx->seq_num++; +if (ctx->seq_num <=PING_COUNT ) { +ping_send_icmp (ctx); +sys_timeout (PING_DELAY_MS , ping_send, ctx); + } +} + +static int ping_loop (struct udevice *udev,const ip_addr_t *addr) +{ +struct ping_ctx ctx = {}; +struct netif *netif; +int ret; + + netif =net_lwip_new_netif (udev); +if (!netif) +return -ENODEV ; + +printf ("Using %s device\n" , udev->name); + + ret =ping_raw_init (&ctx); +if (ret <0 ) { +net_lwip_remove_netif (netif); +return ret; + } + + ctx.target = *addr; + +ping_send (&ctx); + +do { +sys_check_timeouts (); +net_lwip_rx (udev, netif); +if (ctx.alive) +break ; +if (ctrlc ()) { +printf ("\nAbort\n" ); +break ; + } + }while (ctx.seq_num <=PING_COUNT ); + +sys_untimeout (ping_send, &ctx); +ping_raw_stop (&ctx); + +net_lwip_remove_netif (netif); + +if (ctx.alive) +return 0 ; + +printf ("ping failed; host %s is not alive\n" ,ipaddr_ntoa (addr)); +return -1 ; +} + +int do_ping (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]) +{ +ip_addr_t addr; + +if (argc <2 ) +return CMD_RET_USAGE ; + +if (!ipaddr_aton (argv[1 ], &addr)) +return CMD_RET_USAGE ; + +restart: +if (net_lwip_eth_start () <0 ||ping_loop (eth_get_dev (), &addr) <0 ) { +if (net_start_again () ==0 ) + goto restart; +else +return CMD_RET_FAILURE ; + } + +return CMD_RET_SUCCESS ; +}
net/lwip/Makefile +0 -1
@@ -2,7 +2,6 @@ ccflags-y += -I$(srctree)/lib/lwip/lwip/src/include -I$(srctree)/lib/lwip/u-boot obj-$(CONFIG_$(PHASE_)DM_ETH) += net-lwip.o obj-$(CONFIG_CMD_DHCP) += dhcp.o -obj-$(CONFIG_CMD_PING) += ping.o obj-$(CONFIG_CMD_TFTPBOOT) += tftp.o obj-$(CONFIG_WGET) += wget.o
net/lwip/ping.c deleted +0 -180
180 lines not on this page · raw message
Signature · 1 line
2.43.0
PATCH v2 6/13 lwip: dns: do not return CMD_RET_FAILURE on successful resolution
In reply to Jerome ForissierThe DNS loop checks for a non-zero IP address after DNS resolution, but the address is in fact never copied into the context. Fix that.
---
Changes in v2:
- New patch
cmd/lwip/dns.c | 2 ++ 1 file changed, 2 insertions(+)
cmd/lwip/dns.c +2 -0
@@ -38,6 +38,8 @@ static void dns_cb(const char *name, const ip_addr_t *ipaddr, void *arg)return ; } + dns_cb_arg->host_ipaddr.addr = ipaddr->addr; +if (dns_cb_arg->var)env_set (dns_cb_arg->var, ipstr);
Signature · 1 line
2.43.0
PATCH v2 7/13 lwip: dns: do not print IP address when a variable is specified
In reply to Jerome ForissierWhen calling "dns <hostname> <varname>", do not print out the IP address of <hostname> onto the console. Print it only when no variable is passed. The reason is to be able to call do_dns() from another command in need of the DNS services without polluting the output.
---
Changes in v2:
- New patch
cmd/lwip/dns.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
cmd/lwip/dns.c +4 -3
@@ -42,8 +42,6 @@ static void dns_cb(const char *name, const ip_addr_t *ipaddr, void *arg)if (dns_cb_arg->var)env_set (dns_cb_arg->var, ipstr); - -printf ("%s\n" , ipstr); }static int dns_loop (struct udevice *udev,const char *name,const char *var)
@@ -107,8 +105,11 @@ static int dns_loop(struct udevice *udev, const char *name, const char *var)net_lwip_remove_netif (netif); -if (dns_cb_arg.done && dns_cb_arg.host_ipaddr.addr !=0 ) +if (dns_cb_arg.done && dns_cb_arg.host_ipaddr.addr !=0 ) { +if (!var) +printf ("%s\n" ,ipaddr_ntoa (&ipaddr));return CMD_RET_SUCCESS ; + }return CMD_RET_FAILURE ; }
Signature · 1 line
2.43.0
Re: [PATCH v2 07/13] lwip: dns: do not print IP address when a variable is specified
Quoted 6 lines · Jerome Forissier
When calling "dns <hostname> <varname>", do not print out the IP address of <hostname> onto the console. Print it only when no variable is passed. The reason is to be able to call
do_dns()from another command in need of the DNS services without polluting the output.Signed-off-by Jerome Forissier <[email protected]>
As I do not know off-hand, how does this compare with other commands which can be used to set a variable? I assume it's similar. And then, oh, we don't have doc/cmd/usage/dns.rst to start with. So, follow-up to this series please, document the network commands that we have in both lwip and legacy stack and please note where there's differences if any. Thanks!
Signature · 1 line
Tom
Re: [PATCH v2 07/13] lwip: dns: do not print IP address when a variable is specified
Quoted 11 lines · Tom Rini
Quoted 6 lines · Jerome Forissier
When calling "dns <hostname> <varname>", do not print out the IP address of <hostname> onto the console. Print it only when no variable is passed. The reason is to be able to call
do_dns()from another command in need of the DNS services without polluting the output.Signed-off-by Jerome Forissier <[email protected]>As I do not know off-hand, how does this compare with other commands which can be used to set a variable? I assume it's similar.
Yes, it seems to be a general pattern. For example:
- 'part list <interface> <dev> [flags] <varname>', see do_part_list() (and other sub-commands as well)
- 'op count [*]src1 [*]src2 [[*]dest]', see do_binop()
- 'sm reboot_reason [name]', see do_sm_reboot_reason()
etc.
Quoted 4 lines
And then,
oh, we don't havedoc/cmd/usage/dns.rstto start with. So, follow-up to this series please, document the network commands that we have in both lwip and legacy stack and please note where there's differences if any.
Added to my to-do list ;)
Thanks,
Signature · 1 line
Jerome
PATCH v2 8/13 lwip: add net_lwip_dns_resolve()
In reply to Jerome ForissierAdd a helper fonction to convert an IP address (supplied as a text string) or a host name to an ip_addr_t.
---
Changes in v2:
- New patch
include/net-lwip.h | 1 + net/lwip/net-lwip.c | 39 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 40 insertions(+)
include/net-lwip.h +1 -0
@@ -36,6 +36,7 @@ struct netif *net_lwip_new_netif_noip(struct udevice *udev);void net_lwip_remove_netif (struct netif *netif);struct netif *net_lwip_get_netif (void );int net_lwip_rx (struct udevice *udev,struct netif *netif); +int net_lwip_dns_resolve (char *name_or_ip,ip_addr_t *ip);/** * wget_validate_uri() - varidate the uri
net/lwip/net-lwip.c +39 -0
@@ -6,6 +6,7 @@#include <dm/device.h> #include <dm/uclass.h> #include <hexdump.h> +#include <linux/kernel.h> #include <lwip/ip4_addr.h> #include <lwip/err.h> #include <lwip/netif.h>
@@ -315,6 +316,44 @@ int net_lwip_rx(struct udevice *udev, struct netif *netif)return len; } +/** +* net_lwip_dns_resolve() - find IP address from name or IP +* +* @name_or_ip: host name or IP address +* @ip: output IP address +* +* Return value: 0 on success, -1 on failure. +*/ +int net_lwip_dns_resolve (char *name_or_ip,ip_addr_t *ip) +{ +#if defined(CONFIG_CMD_DNS ) +char *var ="_dnsres" ; +char *argv[] = {"dns" , name_or_ip, var,NULL }; +int argc =ARRAY_SIZE (argv) -1 ; +#endif + +if (ipaddr_aton (name_or_ip, ip)) +return 0 ; + +#if defined(CONFIG_CMD_DNS ) +if (do_dns (NULL ,0 , argc, argv) !=CMD_RET_SUCCESS ) +return -1 ; + + name_or_ip =env_get (var); +if (!name_or_ip) +return -1 ; + +if (!ipaddr_aton (name_or_ip, ip)) +return -1 ; + +env_set (var,NULL ); + +return 0 ; +#else +return -1 ; +#endif +} +void net_process_received_packet (uchar *in_packet,int len) {#if defined(CONFIG_API ) || defined(CONFIG_EFI_LOADER )
Signature · 1 line
2.43.0
PATCH v2 9/13 lwip: ping: accept host name when CONFIG_CMD_DNS=y
In reply to Jerome ForissierUpdate the ping command so that a host name is accepted in addition to an IP address, provided DNS support is enabled.
---
Changes in v2:
- New patch
cmd/lwip/ping.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
cmd/lwip/ping.c +2 -2
@@ -14,7 +14,7 @@#include <time.h> U_BOOT_CMD (ping,2 ,1 , do_ping,"send ICMP ECHO_REQUEST to network host" , -"pingAddress" ); +"pingAddressOrHostName" );#define PING_DELAY_MS 1000#define PING_COUNT 5
@@ -168,7 +168,7 @@ int do_ping(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])if (argc <2 )return CMD_RET_USAGE ; -if (!ipaddr_aton (argv[1 ], &addr)) +if (net_lwip_dns_resolve (argv[1 ], &addr))return CMD_RET_USAGE ; restart:
Signature · 1 line
2.43.0
PATCH v2 10/13 net: extract function net_sntp_set_rtc() from sntp_handler()
In reply to Jerome ForissierExtract the code that sets the RTC clock from sntp_handler() in net/sntp.c and make it a new function net_sntp_set_rtc() in net/net-common.c. This will allow re-use with NET_LWIP.
According to [1] it is safe to assume that all devices have been converted to DM_RTC so drop the useless code.
[1] https://lists.denx.de/pipermail/u-boot/2025-June/591376.html
---
Changes in v2:
- Drop the non-RTC case
include/net-common.h | 2 ++ net/net-common.c | 23 +++++++++++++++++++++++ net/sntp.c | 23 +++-------------------- 3 files changed, 28 insertions(+), 20 deletions(-)
include/net-common.h +2 -0
@@ -588,4 +588,6 @@ extern struct wget_http_info default_wget_info;extern struct wget_http_info *wget_info;int wget_request (ulong dst_addr,char *uri,struct wget_http_info *info); +void net_sntp_set_rtc (u32 seconds); +#endif /* __NET_COMMON_H__ */
net/net-common.c +23 -0
@@ -1,5 +1,9 @@// SPDX-License-Identifier: GPL-2.0 + +#include <dm/uclass.h> #include <net-common.h> +#include <linux/time.h> +#include <rtc.h> void copy_filename (char *dst,const char *src,int size) {
@@ -25,3 +29,22 @@ int wget_request(ulong dst_addr, char *uri, struct wget_http_info *info) wget_info = info ? info : &default_wget_info;return wget_do_request (dst_addr, uri); } + +void net_sntp_set_rtc (u32 seconds) +{ +struct rtc_time tm; +struct udevice *dev; +int ret; + +rtc_to_tm (seconds, &tm); + + ret =uclass_get_device (UCLASS_RTC ,0 , &dev); +if (ret) +printf ("SNTP: cannot find RTC: err=%d\n" , ret); +else +dm_rtc_set (dev, &tm); + +printf ("Date: %4d-%02d-%02d Time: %2d:%02d:%02d\n" , + tm.tm_year, tm.tm_mon, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec); +}
net/sntp.c +3 -20
@@ -57,8 +57,7 @@ static void sntp_handler(uchar *pkt, unsigned dest, struct in_addr sip, unsigned src, unsigned len) {struct sntp_pkt_t *rpktp = (struct sntp_pkt_t *)pkt; -struct rtc_time tm; -ulong seconds; +u32 seconds;debug ("%s\n" , __func__);
@@ -69,24 +68,8 @@ static void sntp_handler(uchar *pkt, unsigned dest, struct in_addr sip,* As the RTC's used in U-Boot support second resolution only * we simply ignore the sub-second field. */ -memcpy (&seconds, &rpktp->transmit_timestamp,sizeof (ulong)); - -rtc_to_tm (ntohl (seconds) -2208988800UL + net_ntp_time_offset, &tm); -#ifdef CONFIG_DM_RTC -struct udevice *dev; -int ret; - - ret =uclass_get_device (UCLASS_RTC ,0 , &dev); -if (ret) -printf ("SNTP: cannot find RTC: err=%d\n" , ret); -else -dm_rtc_set (dev, &tm); -#elif defined(CONFIG_CMD_DATE ) -rtc_set (&tm); -#endif -printf ("Date: %4d-%02d-%02d Time: %2d:%02d:%02d\n" , - tm.tm_year, tm.tm_mon, tm.tm_mday, - tm.tm_hour, tm.tm_min, tm.tm_sec); +memcpy (&seconds, &rpktp->transmit_timestamp,sizeof (seconds)); +net_sntp_set_rtc (ntohl (seconds) -2208988800UL + net_ntp_time_offset);net_set_state (NETLOOP_SUCCESS ); }
Signature · 1 line
2.43.0
PATCH v2 11/13 lwip: add sntp command
In reply to Jerome ForissierImplement the sntp command when NET_LWIP=y.
---
(no changes since v1)
cmd/Kconfig | 13 ++-- cmd/lwip/Makefile | 1 + cmd/lwip/sntp.c | 133 +++++++++++++++++++++++++++++++++++++ include/net-common.h | 11 +++ lib/lwip/Makefile | 1 + lib/lwip/u-boot/arch/cc.h | 4 ++ lib/lwip/u-boot/lwipopts.h | 4 ++ 7 files changed, 161 insertions(+), 6 deletions(-) create mode 100644 cmd/lwip/sntp.c
cmd/Kconfig +7 -6
@@ -2061,12 +2061,6 @@ config CMD_CDP and to retrieve configuration data including the VLAN id using the proprietary Cisco Discovery Protocol (CDP). -config CMD_SNTP - bool "sntp" - select PROT_UDP - help - Synchronize RTC via network - config CMD_LINK_LOCAL bool "linklocal" depends on (LIB_RAND || LIB_HW_RAND)
@@ -2144,6 +2138,13 @@ config CMD_PING help Send ICMP ECHO_REQUEST to network host +config CMD_SNTP + bool "sntp" + select PROT_UDP if NET + select PROT_UDP_LWIP if NET_LWIP + help + Synchronize RTC via network + config CMD_TFTPBOOT bool "tftp" select PROT_UDP_LWIP if NET_LWIP
cmd/lwip/Makefile +1 -0
@@ -1,5 +1,6 @@ obj-$(CONFIG_CMD_DHCP) += dhcp.o obj-$(CONFIG_CMD_DNS) += dns.o obj-$(CONFIG_CMD_PING) += ping.o +obj-$(CONFIG_CMD_SNTP) += sntp.o obj-$(CONFIG_CMD_TFTPBOOT) += tftp.o obj-$(CONFIG_CMD_WGET) += wget.o
cmd/lwip/sntp.c new file +133 -0
133 lines not on this page · raw message
include/net-common.h +11 -0
@@ -505,6 +505,17 @@ int dhcp_run(ulong addr, const char *fname, bool autoload);*/ int do_ping (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]); +/** +* do_sntp - Run the sntp command +* +* @cmdtp: Unused +* @flag: Command flags (CMD_FLAG_...) +* @argc: Number of arguments +* @argv: List of arguments +* Return: result (see enum command_ret_t) +*/ +int do_sntp (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]); +/** * do_tftpb - Run the tftpboot command *
lib/lwip/Makefile +1 -0
@@ -13,6 +13,7 @@ obj-y += \ lwip/src/api/sockets.o \ lwip/src/api/tcpip.o \ lwip/src/apps/http/http_client.o \ + lwip/src/apps/sntp/sntp.o \ lwip/src/apps/tftp/tftp.o \ lwip/src/core/altcp_alloc.o \ lwip/src/core/altcp.o \
lib/lwip/u-boot/arch/cc.h +4 -0
@@ -43,4 +43,8 @@#define BYTE_ORDER BIG_ENDIAN#endif +#define SNTP_STARTUP_DELAY 0 +void sntp_set_system_time (uint32_t sec); +#define SNTP_SET_SYSTEM_TIME (sec) sntp_set_system_time(sec) +#endif /* LWIP_ARCH_CC_H */
lib/lwip/u-boot/lwipopts.h +4 -0
@@ -162,4 +162,8 @@#define LWIP_ALTCP_TLS_MBEDTLS 1#endif +#if defined(CONFIG_CMD_SNTP ) +#define LWIP_DHCP_GET_NTP_SRV 1 +#endif +#endif /* LWIP_UBOOT_LWIPOPTS_H */
Signature · 1 line
2.43.0
PATCH v2 12/13 Update doc/README.SNTP
In reply to Jerome ForissierFix an error in doc/README.SNTP ("timeoffset") and clarify the differences between CONFIG_NET=y and CONFIG_NET_LWIP=y.
---
Changes in v2:
- New patch
doc/README.SNTP | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)
doc/README.SNTP +16 -7
@@ -4,14 +4,23 @@ configuration file of the board. The "sntp" command gets network time from NTP time server and syncronize RTC of the board. This command needs the command line parameter of server's IP address or environment variable -"ntpserverip". The network time is sent as UTC. So if you want to -set local time to RTC, set the offset in second from UTC to the -environment variable "time offset". +"ntpserverip". -If the DHCP server provides time server's IP or time offset, you -don't need to set the above environment variables yourself. +[CONFIG_NET_LWIP=y only] The host name of the NTP server may be +provided instead of its IP address provided that CONFIG_CMD_DNS=y. + +The NTP server address does not need to be given if the DHCP server +provides one. + +The network time is sent as UTC. So if you want to set local time to +RTC, set the offset in second from UTC to the environment variable +"timeoffset". + +[CONFIG_NET=y only] If the DHCP server provides time server's IP +or time offset, you don't need to set the above environment +variables yourself. Current limitations of SNTP support: 1. The roundtrip time is ignored. -2. Only the 1st NTP server IP, in the option ntp-servers of DHCP, will - be used. +2. [CONFIG_NET=y only] Only the 1st NTP server IP, in the option + ntp-servers of DHCP, will be used.
Signature · 1 line
2.43.0
Re: [PATCH v2 12/13] Update doc/README.SNTP
Quoted 11 lines · Jerome Forissier
Fix an error in doc/README.SNTP ("timeoffset") and clarify the differences between
CONFIG_NET=yandCONFIG_NET_LWIP=y.Signed-off-by Jerome Forissier <[email protected]>---
Changes in v2:
- New patchdoc/README.SNTP | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)
Thanks for touching the docs. But, can you please convert this to rst and then update it?
Signature · 1 line
Tom
Re: [PATCH v2 12/13] Update doc/README.SNTP
Quoted 8 lines · Tom Rini
Quoted 6 lines · Jerome Forissier
Fix an error in doc/README.SNTP ("timeoffset") and clarify the differences between
CONFIG_NET=yandCONFIG_NET_LWIP=y.Signed-off-by Jerome Forissier <[email protected]>---
Quoted 8 lines
Quoted 5 lines
Changes in v2:
- New patchdoc/README.SNTP | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)Thanks for touching the docs. But, can you please convert this to rst and then update it?
OK. I will post a v3 with a new file: doc/usage/cmd/sntp.rst.
Thanks,
Signature · 1 line
Jerome
PATCH v2 13/13 configs: qemu_arm64_lwip_defconfig: enable CMD_SNTP
In reply to Jerome ForissierEnable the sntp command by default in the arm64 QEMU defconfig for lwIP since this config is meant to have all the features supported by lwIP.
---
(no changes since v1)
configs/qemu_arm64_lwip_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/qemu_arm64_lwip_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_ARCH_QEMU=y CONFIG_NET_LWIP=y CONFIG_CMD_DNS=y +CONFIG_CMD_SNTP=y CONFIG_CMD_WGET=y CONFIG_EFI_HTTP_BOOT=y CONFIG_WGET_HTTPS=y
Signature · 1 line
2.43.0