dt-bindings: phy: Convert brcm,sr-pcie-phy to DT schema
Subsystems (2)
Rob Herring (Arm)
maintainerPATCH 1/1 dt-bindings: phy: Convert brcm,sr-pcie-phy to DT schema
Convert the Broadcom Stingray PCIe PHY binding to DT schema format. It's a straight forward conversion.
Signed-off-by Rob Herring (Arm) <[email protected]>
--- .../bindings/phy/brcm,sr-pcie-phy.txt | 41 ----------------- .../bindings/phy/brcm,sr-pcie-phy.yaml | 46 +++++++++++++++++++ 2 files changed, 46 insertions(+), 41 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.yaml
Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt deleted +0 -41
@@ -1,41 +0,0 @@ -Broadcom Stingray PCIe PHY - -Required properties: -- compatible: must be "brcm,sr-pcie-phy" -- reg: base address and length of the PCIe SS register space -- brcm,sr-cdru: phandle to the CDRU syscon node -- brcm,sr-mhb: phandle to the MHB syscon node -- #phy-cells: Must be 1, denotes the PHY index - -For PAXB based root complex, one can have a configuration of up to 8 PHYs -PHY index goes from 0 to 7 - -For the internal PAXC based root complex, PHY index is always 8 - -Example: - mhb: syscon@60401000 { - compatible = "brcm,sr-mhb", "syscon"; - reg = <0 0x60401000 0 0x38c>; - }; - - cdru: syscon@6641d000 { - compatible = "brcm,sr-cdru", "syscon"; - reg = <0 0x6641d000 0 0x400>; - }; - - pcie_phy: phy@40000000 { - compatible = "brcm,sr-pcie-phy"; - reg = <0 0x40000000 0 0x800>; - brcm,sr-cdru = <&cdru>; - brcm,sr-mhb = <&mhb>; - #phy-cells = <1>; - }; - - /* users of the PCIe PHY */ - - pcie0: pcie@48000000 { - ... - ... - phys = <&pcie_phy 0>; - phy-names = "pcie-phy"; - };
Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.yaml new file +46 -0
46 lines not on this page · raw message
Signature · 1 line
2.47.2