Skip to contentSkip to conversation

dt-bindings: phy: Convert marvell,armada-380-comphy to DT schema

PATCH Applied Rob Herring (Arm) 3 participants 3 messages Jun 7, 2025 – Jun 15, 2025

Subsystems (2)
lore
Share & tools
lore

Rob Herring (Arm)

author maintainer
#0 lore raw

PATCH 1/1 dt-bindings: phy: Convert marvell,armada-380-comphy to DT schema

Convert the Marvell Armada 38x combo PHY binding to DT schema format. It's a straight forward conversion.

---
 .../phy/marvell,armada-380-comphy.yaml        | 83 +++++++++++++++++++
 .../bindings/phy/phy-armada38x-comphy.txt     | 48 -----------
 2 files changed, 83 insertions(+), 48 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/marvell,armada-380-comphy.yaml
 delete mode 100644 Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
Documentation/devicetree/bindings/phy/marvell,armada-380-comphy.yaml new file +83 -0
new file mode 100644
index 000000000000..dcb4c0007832
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/marvell,armada-380-comphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 38x COMPHY controller
+
+maintainers:
+  - Andrew Lunn <[email protected]>
+  - Gregory Clement <[email protected]>
+
+description:
+  This comphy controller can be found on Marvell Armada 38x. It provides a
+  number of shared PHYs used by various interfaces (network, sata, usb,
+  PCIe...).
+
+properties:
+  compatible:
+    items:
+      - const: marvell,armada-380-comphy
+
+  reg:
+    items:
+      - description: COMPHY register location and length
+      - description: Configuration register location and length
+
+  reg-names:
+    items:
+      - const: comphy
+      - const: conf
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^phy@[0-5]$':
+    description: A COMPHY lane
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        maximum: 1
+
+      '#phy-cells':
+        description: Input port index for the PHY lane
+        const: 1
+
+    required:
+      - reg
+      - '#phy-cells'
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    comphy: phy@18300 {
+        compatible = "marvell,armada-380-comphy";
+        reg = <0x18300 0x100>, <0x18460 4>;
+        reg-names = "comphy", "conf";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpm_comphy0: phy@0 {
+            reg = <0>;
+            #phy-cells = <1>;
+        };
+
+        cpm_comphy1: phy@1 {
+            reg = <1>;
+            #phy-cells = <1>;
+        };
+    };
Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt deleted +0 -48

48 lines not on this page · raw message

Signature · 1 line
2.47.2
maintainer Applied
#2 lore raw
In reply to Rob Herring (Arm)
Quoted 4 lines · Rob Herring (Arm)

Convert the Marvell Armada 38x combo PHY binding to DT schema format. It's a straight forward conversion.

Applied, thanks!

[1/1] dt-bindings: phy: Convert marvell,armada-380-comphy to DT schema

      commit: a5aa04619e715adda36ca5a97cae4c48bad8d65b

Best regards,

Signature · 1 line
~Vinod