dt-bindings: phy: Convert ti,dm816x-usb-phy to DT schema
Subsystems (2)
Rob Herring (Arm)
maintainerPATCH 1/1 dt-bindings: phy: Convert ti,dm816x-usb-phy to DT schema
Convert the TI DM816x USB PHY binding to DT schema format. It's a straight forward conversion.
Signed-off-by Rob Herring (Arm) <[email protected]>
--- .../devicetree/bindings/phy/dm816x-phy.txt | 24 -------- .../bindings/phy/ti,dm8168-usb-phy.yaml | 58 +++++++++++++++++++ 2 files changed, 58 insertions(+), 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/dm816x-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/ti,dm8168-usb-phy.yaml
Documentation/devicetree/bindings/phy/dm816x-phy.txt deleted +0 -24
@@ -1,24 +0,0 @@ -Device tree binding documentation for am816x USB PHY -========================= - -Required properties: -- compatible : should be "ti,dm816x-usb-phy" -- reg : offset and length of the PHY register set. -- reg-names : name for the phy registers -- clocks : phandle to the clock -- clock-names : name of the clock -- syscon: phandle for the syscon node to access misc registers -- #phy-cells : from the generic PHY bindings, must be 1 -- syscon: phandle for the syscon node to access misc registers - -Example: - -usb_phy0: usb-phy@20 { - compatible = "ti,dm8168-usb-phy"; - reg = <0x20 0x8>; - reg-names = "phy"; - clocks = <&main_fapll 6>; - clock-names = "refclk"; - #phy-cells = <0>; - syscon = <&scm_conf>; -};
Documentation/devicetree/bindings/phy/ti,dm8168-usb-phy.yaml new file +58 -0
58 lines not on this page · raw message
Signature · 1 line
2.47.2