Skip to contentSkip to conversation

dt-bindings: phy: Convert ti,da830-usb-phy to DT schema

PATCH In review Rob Herring (Arm) 2 participants 2 messages Jun 7, 2025 – Jun 9, 2025

Subsystems (2)
lore
Share & tools
lore

Rob Herring (Arm)

author maintainer
#0 lore raw

PATCH 1/1 dt-bindings: phy: Convert ti,da830-usb-phy to DT schema

Convert the TI DA830 USB PHY binding to DT schema format. Add "clocks" and "clock-names" which are already in use.

---
 .../devicetree/bindings/phy/phy-da8xx-usb.txt | 40 ---------------
 .../bindings/phy/ti,da830-usb-phy.yaml        | 49 +++++++++++++++++++
 2 files changed, 49 insertions(+), 40 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt
 create mode 100644 Documentation/devicetree/bindings/phy/ti,da830-usb-phy.yaml
Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt deleted +0 -40
deleted file mode 100644
index c26478be391b..000000000000
@@ -1,40 +0,0 @@
-TI DA8xx/OMAP-L1xx/AM18xx USB PHY
-
-Required properties:
- - compatible: must be "ti,da830-usb-phy".
- - #phy-cells: must be 1.
-
-This device controls the PHY for both the USB 1.1 OHCI and USB 2.0 OTG
-controllers on DA8xx SoCs. Consumers of this device should use index 0 for
-the USB 2.0 phy device and index 1 for the USB 1.1 phy device.
-
-It also requires a "syscon" node with compatible = "ti,da830-cfgchip", "syscon"
-to access the CFGCHIP2 register.
-
-Example:
-
-	cfgchip: cfgchip@1417c {
-		compatible = "ti,da830-cfgchip", "syscon";
-		reg = <0x1417c 0x14>;
-	};
-
-	usb_phy: usb-phy {
-		compatible = "ti,da830-usb-phy";
-		#phy-cells = <1>;
-	};
-
-	usb20: usb@200000 {
-		compatible = "ti,da830-musb";
-		reg = <0x200000 0x1000>;
-		interrupts = <58>;
-		phys = <&usb_phy 0>;
-		phy-names = "usb-phy";
-	};
-
-	usb11: usb@225000 {
-		compatible = "ti,da830-ohci";
-		reg = <0x225000 0x1000>;
-		interrupts = <59>;
-		phys = <&usb_phy 1>;
-		phy-names = "usb-phy";
-	};
Documentation/devicetree/bindings/phy/ti,da830-usb-phy.yaml new file +49 -0

49 lines not on this page · raw message

Signature · 1 line
2.47.2
#1 lore raw
Quoted 5 lines · Rob Herring (Arm)

Convert the TI DA830 USB PHY binding to DT schema format. Add "clocks" and "clock-names" which are already in use.

---

...

Quoted 11 lines
Documentation/devicetree/bindings/phy/ti,da830-usb-phy.yaml new file +5 -0
new file mode 100644
index 000000000000..e18746f80982
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,da830-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#

Documentation/devicetree/bindings/phy/ti,da830-usb-phy.yaml line 15

Quoted 10 lines
Documentation/devicetree/bindings/phy/ti,da830-usb-phy.yaml new file +10 -0
+
+title: TI DA8xx/OMAP-L1xx/AM18xx USB PHY
+
+maintainers:
+  - David Lechner <[email protected]>
+
+description: >
+  This device controls the PHY for both the USB 1.1 OHCI and USB 2.0 OTG
+  controllers on DA8xx SoCs. Consumers of this device should use index 0 for
+  the USB 2.0 phy device and index 1 for the USB 1.1 phy device.

Probably doesn't matter much, but we could move the description of the #phy-cells to that property.

Quoted 13 lines
Documentation/devicetree/bindings/phy/ti,da830-usb-phy.yaml new file +13 -0
+
+  It also requires a "syscon" node with compatible = "ti,da830-cfgchip", "syscon"
+  to access the CFGCHIP2 register.
+
+properties:
+  compatible:
+    items:
+      - const: ti,da830-usb-phy
+
+  '#phy-cells':
+    const: 1
+
+  clocks:

Documentation/devicetree/bindings/phy/ti,da830-usb-phy.yaml line 38

Quoted 10 lines
Documentation/devicetree/bindings/phy/ti,da830-usb-phy.yaml new file +10 -0
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: usb0_clk48
+      - const: usb1_clk48
+
+required:
+  - compatible
+  - '#phy-cells'

Probably should make clocks and clock-names required.

Quoted 11 lines
Documentation/devicetree/bindings/phy/ti,da830-usb-phy.yaml new file +11 -0
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy {
+        compatible = "ti,da830-usb-phy";
+        #phy-cells = <1>;
+        clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>;
+        clock-names = "usb0_clk48", "usb1_clk48";
+    };
Signature · 3 lines
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy