arm64: dts: cavium: thunder2: Add missing PL011 "uartclk"
Rob Herring (Arm)
maintainerPATCH 1/1 arm64: dts: cavium: thunder2: Add missing PL011 "uartclk"
The PL011 IP has 2 clock inputs for UART core/baud and APB bus. The Thunder2 SoC is missing the core "uartclk". In this case, the Linux driver uses single clock for both clock inputs. Let's assume that's how the h/w is wired and make the DT reflect that.
---
Arnd, Please apply directly.
arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi +2 -2
@@ -136,8 +136,8 @@ uart0: serial@402020000 { reg = <0x04 0x02020000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk125mhz>; - clock-names = "apb_pclk"; + clocks = <&clk125mhz>, <&clk125mhz>; + clock-names = "uartclk", "apb_pclk"; }; };
Signature · 1 line
2.47.2
This patch was applied to soc/soc.git (for-next) by Arnd Bergmann <[email protected]>:
Hello:
This patch was applied to soc/soc.git (for-next)
by Arnd Bergmann <[email protected]>:
Quoted 8 lines · On Mon, 9 Jun 2025 16:57:06 -0500 you wrote:
The PL011 IP has 2 clock inputs for UART core/baud and APB bus. The Thunder2 SoC is missing the core "uartclk". In this case, the Linux driver uses single clock for both clock inputs. Let's assume that's how the h/w is wired and make the DT reflect that.
Signed-off-by Rob Herring (Arm) <[email protected]>[...]
Here is the summary with links:
- arm64: dts: cavium: thunder2: Add missing PL011 "uartclk"
https://git.kernel.org/soc/soc/c/0d495db1b9bd
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html