Skip to contentSkip to conversation

net: dlink: enable RMON MMIO access on supported devices

PATCH Applied Moon Yeounsu 2 participants 2 messages Jun 10, 2025 – Jun 11, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 net: dlink: enable RMON MMIO access on supported devices

Enable memory-mapped I/O access to RMON statistics registers for devices known to work correctly. Currently, only the D-Link DGE-550T (0x4000) with PCI revision A3 (0x0c) is allowed.

To avoid issues on other hardware, a runtime check was added to restrict MMIO usage. The MEM_MAPPING macro was removed in favor of runtime detection.

To access RMON registers, the code dw32(RmonStatMask, 0x0007ffff); must also be skipped, so this patch conditionally disables it as well.

Tested-on: D-Link DGE-550T Rev-A3

---
Changelog:
v1: https://lore.kernel.org/netdev/[email protected]/
v2: https://lore.kernel.org/netdev/[email protected]/
- Remove Kconfig option and do runtime check.
v3:
- Rebased onto the latest net-next.

---
 drivers/net/ethernet/dlink/dl2k.c | 57 ++++++++++++++++---------------
 drivers/net/ethernet/dlink/dl2k.h |  2 ++
 2 files changed, 32 insertions(+), 27 deletions(-)
drivers/net/ethernet/dlink/dl2k.c +30 -27
index 038a0400c1f9..ea8361ba6cad 100644
@@ -99,6 +99,13 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_tx_timeout		= rio_tx_timeout,
 };
 
+static bool is_support_rmon_mmio(struct pci_dev *pdev)
+{
+	return pdev->vendor == PCI_VENDOR_ID_DLINK &&
+	       pdev->device == 0x4000 &&
+	       pdev->revision == 0x0c;
+}
+
 static int
 rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
@@ -131,18 +138,22 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	np = netdev_priv(dev);
 
+	if (is_support_rmon_mmio(pdev))
+		np->rmon_enable = true;
+
 	/* IO registers range. */
 	ioaddr = pci_iomap(pdev, 0, 0);
 	if (!ioaddr)
 		goto err_out_dev;
 	np->eeprom_addr = ioaddr;
 
-#ifdef MEM_MAPPING
-	/* MM registers range. */
-	ioaddr = pci_iomap(pdev, 1, 0);
-	if (!ioaddr)
-		goto err_out_iounmap;
-#endif
+	if (np->rmon_enable) {
+		/* MM registers range. */
+		ioaddr = pci_iomap(pdev, 1, 0);
+		if (!ioaddr)
+			goto err_out_iounmap;
+	}
+
 	np->ioaddr = ioaddr;
 	np->chip_id = chip_idx;
 	np->pdev = pdev;
@@ -289,9 +300,8 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
 	dma_free_coherent(&pdev->dev, TX_TOTAL_SIZE, np->tx_ring,
 			  np->tx_ring_dma);
 err_out_iounmap:
-#ifdef MEM_MAPPING
-	pci_iounmap(pdev, np->ioaddr);
-#endif
+	if (np->rmon_enable)
+		pci_iounmap(pdev, np->ioaddr);
 	pci_iounmap(pdev, np->eeprom_addr);
 err_out_dev:
 	free_netdev (dev);
@@ -578,7 +588,8 @@ static void rio_hw_init(struct net_device *dev)
 	dw8(TxDMAPollPeriod, 0xff);
 	dw8(RxDMABurstThresh, 0x30);
 	dw8(RxDMAUrgentThresh, 0x30);
-	dw32(RmonStatMask, 0x0007ffff);
+	if (!np->rmon_enable)
+		dw32(RmonStatMask, 0x0007ffff);
 	/* clear statistics */
 	clear_stats (dev);
 
@@ -1076,9 +1087,6 @@ get_stats (struct net_device *dev)
 {
 	struct netdev_private *np = netdev_priv(dev);
 	void __iomem *ioaddr = np->ioaddr;
-#ifdef MEM_MAPPING
-	int i;
-#endif
 	unsigned int stat_reg;
 	unsigned long flags;
 
@@ -1123,10 +1131,10 @@ get_stats (struct net_device *dev)
 	dr16(MacControlFramesXmtd);
 	dr16(FramesWEXDeferal);
 
-#ifdef MEM_MAPPING
-	for (i = 0x100; i <= 0x150; i += 4)
-		dr32(i);
-#endif
+	if (np->rmon_enable)
+		for (int i = 0x100; i <= 0x150; i += 4)
+			dr32(i);
+
 	dr16(TxJumboFrames);
 	dr16(RxJumboFrames);
 	dr16(TCPCheckSumErrors);
@@ -1143,9 +1151,6 @@ clear_stats (struct net_device *dev)
 {
 	struct netdev_private *np = netdev_priv(dev);
 	void __iomem *ioaddr = np->ioaddr;
-#ifdef MEM_MAPPING
-	int i;
-#endif
 
 	/* All statistics registers need to be acknowledged,
 	   else statistic overflow could cause problems */
@@ -1181,10 +1186,9 @@ clear_stats (struct net_device *dev)
 	dr16(BcstFramesXmtdOk);
 	dr16(MacControlFramesXmtd);
 	dr16(FramesWEXDeferal);
-#ifdef MEM_MAPPING
-	for (i = 0x100; i <= 0x150; i += 4)
-		dr32(i);
-#endif
+	if (np->rmon_enable)
+		for (int i = 0x100; i <= 0x150; i += 4)
+			dr32(i);
 	dr16(TxJumboFrames);
 	dr16(RxJumboFrames);
 	dr16(TCPCheckSumErrors);
@@ -1810,9 +1814,8 @@ rio_remove1 (struct pci_dev *pdev)
 				  np->rx_ring_dma);
 		dma_free_coherent(&pdev->dev, TX_TOTAL_SIZE, np->tx_ring,
 				  np->tx_ring_dma);
-#ifdef MEM_MAPPING
-		pci_iounmap(pdev, np->ioaddr);
-#endif
+		if (np->rmon_enable)
+			pci_iounmap(pdev, np->ioaddr);
 		pci_iounmap(pdev, np->eeprom_addr);
 		free_netdev (dev);
 		pci_release_regions (pdev);
drivers/net/ethernet/dlink/dl2k.h +2 -0
index ba679025e866..4788cc94639d 100644
@@ -403,6 +403,8 @@ struct netdev_private {
 	u16 negotiate;		/* Negotiated media */
 	int phy_addr;		/* PHY addresses. */
 	u16 led_mode;		/* LED mode read from EEPROM (IP1000A only) */
+
+	bool rmon_enable;
 };
 
 /* The station address location in the EEPROM. */
Signature · 1 line
2.49.0
#1 lore raw
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Hello:

This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Quoted 9 lines · On Tue, 10 Jun 2025 09:01:30 +0900 you wrote:

Enable memory-mapped I/O access to RMON statistics registers for devices known to work correctly. Currently, only the D-Link DGE-550T (0x4000) with PCI revision A3 (0x0c) is allowed.

To avoid issues on other hardware, a runtime check was added to restrict MMIO usage. The MEM_MAPPING macro was removed in favor of runtime detection.

[...]

Here is the summary with links:
- [net-next,v3] net: dlink: enable RMON MMIO access on supported devices

    https://git.kernel.org/netdev/net-next/c/7fc18f947625

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html