bnxt_en: Bug fixes
Michael Chan
maintainercover bnxt_en: Bug fixes
Thie first patch fixes a crash during PCIe AER when the bnxt_re RoCE driver is loaded. The second patch is a refactor patch needed by patch 3. Patch 3 fixes a packet drop issue if queue restart is done on a ring belonging to a non-default RSS context. Patch 2 and 3 are version 2 that has addressed the v1 issue by reducing the scope of the traffic disruptions:
https://lore.kernel.org/netdev/CACKFLi=P9xYHVF4h2Ovjd-8DaoyzFAHnY6Y6H+1b7eGq+BQZzA@mail.gmail.com/
Kalesh AP (1):
bnxt_en: Fix double invocation of bnxt_ulp_stop()/bnxt_ulp_start()
Pavan Chebbi (2):
bnxt_en: Add a helper function to configure MRU and RSS
bnxt_en: Update MRU and RSS table of RSS contexts on queue reset
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 87 ++++++++++++++++--- drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c | 24 +++-- 2 files changed, 84 insertions(+), 27 deletions(-)
Signature · 1 line
2.30.1
Michael Chan
maintainerPATCH 1/3 bnxt_en: Fix double invocation of bnxt_ulp_stop()/bnxt_ulp_start()
From: Kalesh AP <[email protected]>
Before the commit under the Fixes tag below, bnxt_ulp_stop() and bnxt_ulp_start() were always invoked in pairs. After that commit, the new bnxt_ulp_restart() can be invoked after bnxt_ulp_stop() has been called. This may result in the RoCE driver's aux driver .suspend() method being invoked twice. The 2nd bnxt_re_suspend() call will crash when it dereferences a NULL pointer:
(NULL ib_device): Handle device suspend call
BUG: kernel NULL pointer dereference, address: 0000000000000b78 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 20 UID: 0 PID: 181 Comm: kworker/u96:5 Tainted: G S 6.15.0-rc1 #4 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 Workqueue: bnxt_pf_wq bnxt_sp_task [bnxt_en] RIP: 0010:bnxt_re_suspend+0x45/0x1f0 [bnxt_re] Code: 8b 05 a7 3c 5b f5 48 89 44 24 18 31 c0 49 8b 5c 24 08 4d 8b 2c 24 e8 ea 06 0a f4 48 c7 c6 04 60 52 c0 48 89 df e8 1b ce f9 ff <48> 8b 83 78 0b 00 00 48 8b 80 38 03 00 00 a8 40 0f 85 b5 00 00 00 RSP: 0018:ffffa2e84084fd88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffb4b6b934 RDI: 00000000ffffffff RBP: ffffa1760954c9c0 R08: 0000000000000000 R09: c0000000ffffdfff R10: 0000000000000001 R11: ffffa2e84084fb50 R12: ffffa176031ef070 R13: ffffa17609775000 R14: ffffa17603adc180 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa17daa397000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000b78 CR3: 00000004aaa30003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bnxt_ulp_stop+0x69/0x90 [bnxt_en] bnxt_sp_task+0x678/0x920 [bnxt_en] ? __schedule+0x514/0xf50 process_scheduled_works+0x9d/0x400 worker_thread+0x11c/0x260 ? __pfx_worker_thread+0x10/0x10 kthread+0xfe/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2b/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30
Check the BNXT_EN_FLAG_ULP_STOPPED flag and do not proceed if the flag is already set. This will preserve the original symmetrical bnxt_ulp_stop() and bnxt_ulp_start().
Also, inside bnxt_ulp_start(), clear the BNXT_EN_FLAG_ULP_STOPPED flag after taking the mutex to avoid any race condition. And for symmetry, only proceed in bnxt_ulp_start() if the BNXT_EN_FLAG_ULP_STOPPED is set.
--- drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c | 24 ++++++++----------- 1 file changed, 10 insertions(+), 14 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c +10 -14
@@ -231,10 +231,9 @@ void bnxt_ulp_stop(struct bnxt *bp)return ;mutex_lock (&edev->en_dev_lock); -if (!bnxt_ulp_registered (edev)) { -mutex_unlock (&edev->en_dev_lock); -return ; - } +if (!bnxt_ulp_registered (edev) || + (edev->flags &BNXT_EN_FLAG_ULP_STOPPED )) + goto ulp_stop_exit; edev->flags |=BNXT_EN_FLAG_ULP_STOPPED ;if (aux_priv) {
@@ -250,6 +249,7 @@ void bnxt_ulp_stop(struct bnxt *bp) adrv->suspend (adev, pm); } } +ulp_stop_exit:mutex_unlock (&edev->en_dev_lock); }
@@ -258,19 +258,13 @@ void bnxt_ulp_start(struct bnxt *bp, int err)struct bnxt_aux_priv *aux_priv = bp->aux_priv;struct bnxt_en_dev *edev = bp->edev; -if (!edev) -return ; - - edev->flags &= ~BNXT_EN_FLAG_ULP_STOPPED ; - -if (err) +if (!edev || err)return ;mutex_lock (&edev->en_dev_lock); -if (!bnxt_ulp_registered (edev)) { -mutex_unlock (&edev->en_dev_lock); -return ; - } +if (!bnxt_ulp_registered (edev) || + !(edev->flags &BNXT_EN_FLAG_ULP_STOPPED )) + goto ulp_start_exit;if (edev->ulp_tbl->msix_requested)bnxt_fill_msix_vecs (bp, edev->msix_entries);
@@ -287,6 +281,8 @@ void bnxt_ulp_start(struct bnxt *bp, int err) adrv->resume (adev); } } +ulp_start_exit: + edev->flags &= ~BNXT_EN_FLAG_ULP_STOPPED ;mutex_unlock (&edev->en_dev_lock); }
Signature · 1 line
2.30.1
Re: [PATCH net 1/3] bnxt_en: Fix double invocation of bnxt_ulp_stop()/bnxt_ulp_start()
Quoted 53 lines · Michael Chan
From: Kalesh AP <[email protected]>
Before the commit under the Fixes tag below,
bnxt_ulp_stop()andbnxt_ulp_start()were always invoked in pairs. After that commit, the newbnxt_ulp_restart()can be invoked afterbnxt_ulp_stop()has been called. This may result in the RoCE driver's aux driver .suspend() method being invoked twice. The 2ndbnxt_re_suspend()call will crash when it dereferences a NULL pointer:(NULL
ib_device): Handle device suspend callBUG: kernel NULL pointer dereference, address: 0000000000000b78 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 20 UID: 0 PID: 181 Comm: kworker/u96:5 Tainted: G S 6.15.0-rc1 #4 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 Workqueue: bnxt_pf_wq bnxt_sp_task [bnxt_en] RIP: 0010:bnxt_re_suspend+0x45/0x1f0 [bnxt_re] Code: 8b 05 a7 3c 5b f5 48 89 44 24 18 31 c0 49 8b 5c 24 08 4d 8b 2c 24 e8 ea 06 0a f4 48 c7 c6 04 60 52 c0 48 89 df e8 1b ce f9 ff <48> 8b 83 78 0b 00 00 48 8b 80 38 03 00 00 a8 40 0f 85 b5 00 00 00 RSP: 0018:ffffa2e84084fd88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffb4b6b934 RDI: 00000000ffffffff RBP: ffffa1760954c9c0 R08: 0000000000000000 R09: c0000000ffffdfff R10: 0000000000000001 R11: ffffa2e84084fb50 R12: ffffa176031ef070 R13: ffffa17609775000 R14: ffffa17603adc180 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa17daa397000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000b78 CR3: 00000004aaa30003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bnxt_ulp_stop+0x69/0x90 [bnxt_en] bnxt_sp_task+0x678/0x920 [bnxt_en] ? __schedule+0x514/0xf50 process_scheduled_works+0x9d/0x400 worker_thread+0x11c/0x260 ? __pfx_worker_thread+0x10/0x10 kthread+0xfe/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2b/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30Check the
BNXT_EN_FLAG_ULP_STOPPEDflag and do not proceed if the flag is already set. This will preserve the original symmetricalbnxt_ulp_stop()andbnxt_ulp_start().Also, inside
bnxt_ulp_start(), clear theBNXT_EN_FLAG_ULP_STOPPEDflag after taking the mutex to avoid any race condition. And for symmetry, only proceed inbnxt_ulp_start()if theBNXT_EN_FLAG_ULP_STOPPEDis set.
Quoted 4 lines
Fixes 3c163f35bd50 ("bnxt_en: Optimize recovery path ULP locking in the driver")Signed-off-by Kalesh AP <[email protected]>Co-developed-by Michael Chan <[email protected]>Signed-off-by Michael Chan <[email protected]>
Michael Chan
maintainerPATCH 2/3 bnxt_en: Add a helper function to configure MRU and RSS
In reply to Michael ChanFrom: Pavan Chebbi <[email protected]>
Add a new helper function that will configure MRU and RSS table of a VNIC. This will be useful when we configure both on a VNIC when resetting an RX ring. This function will be used again in the next bug fix patch where we have to reconfigure VNICs for RSS contexts.
---
Cc: David Wei <[email protected]>
v1: https://lore.kernel.org/netdev/[email protected]/
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 37 ++++++++++++++++------- 1 file changed, 26 insertions(+), 11 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +26 -11
@@ -10780,6 +10780,26 @@ void bnxt_del_one_rss_ctx(struct bnxt *bp, struct bnxt_rss_ctx *rss_ctx, bp->num_rss_ctx--; } +static int bnxt_set_vnic_mru_p5 (struct bnxt *bp,struct bnxt_vnic_info *vnic, +u16 mru) +{ +int rc; + +if (mru) { + rc =bnxt_hwrm_vnic_set_rss_p5 (bp, vnic, true); +if (rc) { +netdev_err (bp->dev,"hwrm vnic %d set rss failure rc: %d\n" , + vnic->vnic_id, rc); +return rc; + } + } + vnic->mru = mru; +bnxt_hwrm_vnic_update (bp, vnic, +VNIC_UPDATE_REQ_ENABLES_MRU_VALID ); + +return 0 ; +} +static void bnxt_hwrm_realloc_rss_ctx_vnic (struct bnxt *bp) {bool set_tpa = !!(bp->flags &BNXT_FLAG_TPA );
@@ -15927,6 +15947,7 @@ static int bnxt_queue_start(struct net_device *dev, void *qmem, int idx)struct bnxt_vnic_info *vnic;struct bnxt_napi *bnapi;int i, rc; +u16 mru; rxr = &bp->rx_ring[idx]; clone = qmem;
@@ -15977,18 +15998,13 @@ static int bnxt_queue_start(struct net_device *dev, void *qmem, int idx)napi_enable_locked (&bnapi->napi);bnxt_db_nq_arm (bp, &cpr->cp_db, cpr->cp_raw_cons); + mru = bp->dev->mtu +ETH_HLEN +VLAN_HLEN ;for (i =0 ; i < bp->nr_vnics; i++) { vnic = &bp->vnic_info[i]; - rc =bnxt_hwrm_vnic_set_rss_p5 (bp, vnic, true); -if (rc) { -netdev_err (bp->dev,"hwrm vnic %d set rss failure rc: %d\n" , - vnic->vnic_id, rc); + rc =bnxt_set_vnic_mru_p5 (bp, vnic, mru); +if (rc)return rc; - } - vnic->mru = bp->dev->mtu +ETH_HLEN +VLAN_HLEN ; -bnxt_hwrm_vnic_update (bp, vnic, -VNIC_UPDATE_REQ_ENABLES_MRU_VALID ); }return 0 ;
@@ -16013,9 +16029,8 @@ static int bnxt_queue_stop(struct net_device *dev, void *qmem, int idx)for (i =0 ; i < bp->nr_vnics; i++) { vnic = &bp->vnic_info[i]; - vnic->mru =0 ; -bnxt_hwrm_vnic_update (bp, vnic, -VNIC_UPDATE_REQ_ENABLES_MRU_VALID ); + +bnxt_set_vnic_mru_p5 (bp, vnic,0 ); }/* Make sure NAPI sees that the VNIC is disabled */ synchronize_net ();
Signature · 1 line
2.30.1
Michael Chan
maintainerPATCH 3/3 bnxt_en: Update MRU and RSS table of RSS contexts on queue reset
In reply to Michael ChanFrom: Pavan Chebbi <[email protected]>
The commit under the Fixes tag below which updates the VNICs' RSS and MRU during .ndo_queue_start(), needs to be extended to cover any non-default RSS contexts which have their own VNICs. Without this step, packets that are destined to a non-default RSS context may be dropped after .ndo_queue_start().
We further optimize this scheme by updating the VNIC only if the RX ring being restarted is in the RSS table of the VNIC. Updating the VNIC (in particular setting the MRU to 0) will momentarily stop all traffic to all rings in the RSS table. Any VNIC that has the RX ring excluded from the RSS table can skip this step and avoid the traffic disruption.
Note that this scheme is just an improvement. A VNIC with multiple rings in the RSS table will still see traffic disruptions to all rings in the RSS table when one of the rings is being restarted. We are working on a FW scheme that will improve upon this further.
---
Cc: David Wei <[email protected]>
v2: Reduce scope of traffic disruptions.
v1: https://lore.kernel.org/netdev/[email protected]/
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 56 +++++++++++++++++++++-- 1 file changed, 51 insertions(+), 5 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +51 -5
@@ -10780,11 +10780,39 @@ void bnxt_del_one_rss_ctx(struct bnxt *bp, struct bnxt_rss_ctx *rss_ctx, bp->num_rss_ctx--; } +static bool bnxt_vnic_has_rx_ring (struct bnxt *bp,struct bnxt_vnic_info *vnic, +int rxr_id) +{ +u16 tbl_size =bnxt_get_rxfh_indir_size (bp->dev); +int i, vnic_rx; + +/* Ntuple VNIC always has all the rx rings. Any change of ring id +* must be updated because a future filter may use it. +*/ +if (vnic->flags &BNXT_VNIC_NTUPLE_FLAG ) +return true; + +for (i =0 ; i < tbl_size; i++) { +if (vnic->flags &BNXT_VNIC_RSSCTX_FLAG ) + vnic_rx =ethtool_rxfh_context_indir (vnic->rss_ctx)[i]; +else + vnic_rx = bp->rss_indir_tbl[i]; + +if (rxr_id == vnic_rx) +return true; + } + +return false; +} +static int bnxt_set_vnic_mru_p5 (struct bnxt *bp,struct bnxt_vnic_info *vnic, -u16 mru) +u16 mru,int rxr_id) {int rc; +if (!bnxt_vnic_has_rx_ring (bp, vnic, rxr_id)) +return 0 ; +if (mru) { rc =bnxt_hwrm_vnic_set_rss_p5 (bp, vnic, true);if (rc) {
@@ -10800,6 +10828,24 @@ static int bnxt_set_vnic_mru_p5(struct bnxt *bp, struct bnxt_vnic_info *vnic,return 0 ; } +static int bnxt_set_rss_ctx_vnic_mru (struct bnxt *bp,u16 mru,int rxr_id) +{ +struct ethtool_rxfh_context *ctx; +unsigned long context; +int rc; + +xa_for_each (&bp->dev->ethtool->rss_ctx, context, ctx) { +struct bnxt_rss_ctx *rss_ctx =ethtool_rxfh_context_priv (ctx); +struct bnxt_vnic_info *vnic = &rss_ctx->vnic; + + rc =bnxt_set_vnic_mru_p5 (bp, vnic, mru, rxr_id); +if (rc) +return rc; + } + +return 0 ; +} +static void bnxt_hwrm_realloc_rss_ctx_vnic (struct bnxt *bp) {bool set_tpa = !!(bp->flags &BNXT_FLAG_TPA );
@@ -16002,12 +16048,11 @@ static int bnxt_queue_start(struct net_device *dev, void *qmem, int idx)for (i =0 ; i < bp->nr_vnics; i++) { vnic = &bp->vnic_info[i]; - rc =bnxt_set_vnic_mru_p5 (bp, vnic, mru); + rc =bnxt_set_vnic_mru_p5 (bp, vnic, mru, idx);if (rc)return rc; } - -return 0 ; +return bnxt_set_rss_ctx_vnic_mru (bp, mru, idx); err_reset: netdev_err(bp->dev, "Unexpected HWRM error during queue start rc: %d\n",
@@ -16030,8 +16075,9 @@ static int bnxt_queue_stop(struct net_device *dev, void *qmem, int idx)for (i =0 ; i < bp->nr_vnics; i++) { vnic = &bp->vnic_info[i]; -bnxt_set_vnic_mru_p5 (bp, vnic,0 ); +bnxt_set_vnic_mru_p5 (bp, vnic,0 , idx); } +bnxt_set_rss_ctx_vnic_mru (bp,0 , idx);/* Make sure NAPI sees that the VNIC is disabled */ synchronize_net (); rxr = &bp->rx_ring[idx];
Signature · 1 line
2.30.1
Simon Horman
reviewerRe: [PATCH net 3/3] bnxt_en: Update MRU and RSS table of RSS contexts on queue reset
Quoted 7 lines · Michael Chan
From: Pavan Chebbi <[email protected]>
The commit under the Fixes tag below which updates the VNICs' RSS and MRU during .ndo_queue_start(), needs to be extended to cover any non-default RSS contexts which have their own VNICs. Without this step, packets that are destined to a non-default RSS context may be dropped after .ndo_queue_start().
Hi,
This patch seems to be doing two things:
1. Addressing the bug described above
2. Implementing the optimisation below
As such I think it would be best split into two patches. And I'd lean towards targeting the optimisation at net-next since "this scheme is just an improvement".
Quoted 17 lines
We further optimize this scheme by updating the VNIC only if the RX ring being restarted is in the RSS table of the VNIC. Updating the VNIC (in particular setting the MRU to 0) will momentarily stop all traffic to all rings in the RSS table. Any VNIC that has the RX ring excluded from the RSS table can skip this step and avoid the traffic disruption.
Note that this scheme is just an improvement. A VNIC with multiple rings in the RSS table will still see traffic disruptions to all rings in the RSS table when one of the rings is being restarted. We are working on a FW scheme that will improve upon this further.
Fixes 5ac066b7b062 ("bnxt_en: Fix queue start to update vnic RSS table")Reported-by David Wei <[email protected]>Signed-off-by Pavan Chebbi <[email protected]>Signed-off-by Michael Chan <[email protected]>
...
Michael Chan
maintainerRe: [PATCH net 3/3] bnxt_en: Update MRU and RSS table of RSS contexts on queue reset
Quoted 12 lines · Simon Horman
Quoted 7 lines · Michael Chan
From: Pavan Chebbi <[email protected]>
The commit under the Fixes tag below which updates the VNICs' RSS and MRU during .ndo_queue_start(), needs to be extended to cover any non-default RSS contexts which have their own VNICs. Without this step, packets that are destined to a non-default RSS context may be dropped after .ndo_queue_start().
Hi,
Quoted 7 lines
This patch seems to be doing two things:
1. Addressing the bug described above
2. Implementing the optimisation belowAs such I think it would be best split into two patches. And I'd lean towards targeting the optimisation at net-next since "this scheme is just an improvement".
The original fix (without the improvement) was rejected by Jakub and that's why we are improving it here.
Jakub, what do you think?
Jakub Kicinski
maintainerRe: [PATCH net 3/3] bnxt_en: Update MRU and RSS table of RSS contexts on queue reset
Quoted 14 lines · On Mon, 16 Jun 2025 10:40:27 -0700 Michael Chan wrote:
Quoted 13 lines · Simon Horman
Quoted 7 lines · Michael Chan
From: Pavan Chebbi <[email protected]>
The commit under the Fixes tag below which updates the VNICs' RSS and MRU during .ndo_queue_start(), needs to be extended to cover any non-default RSS contexts which have their own VNICs. Without this step, packets that are destined to a non-default RSS context may be dropped after .ndo_queue_start().
This patch seems to be doing two things:
1. Addressing the bug described above
2. Implementing the optimisation below
Quoted 8 lines
Quoted 3 lines
As such I think it would be best split into two patches. And I'd lean towards targeting the optimisation at net-next since "this scheme is just an improvement".
The original fix (without the improvement) was rejected by Jakub and that's why we are improving it here.
Jakub, what do you think?
I think the phrasing of the commit message could be better, but the fix is correct as is. We were shutting down just the main vNIC, now we shut down all the vNICs to which the queue belongs.
It's not an "optimization" in the sense of an improvement to status quo, IIUC Pavan means that shutting down the vNIC is still not 100% correct for single queue reset, but best we can do with current FW. If we were to split this into 2 changes, I don't think those changes would form a logical progression: reset vNIC 0 (current) -> reset all (net) -> reset the correct set of vNICs (net-next).. ?
I'd chalk this up to people writing sassy / opinion-tainted commit messages after reviewers disagree with their initial implementation. I tend not to fight it :)
Michael Chan
maintainerRe: [PATCH net 3/3] bnxt_en: Update MRU and RSS table of RSS contexts on queue reset
Quoted 7 lines · Jakub Kicinski
I think the phrasing of the commit message could be better, but the fix is correct as is. We were shutting down just the main vNIC, now we shut down all the vNICs to which the queue belongs.
It's not an "optimization" in the sense of an improvement to status quo, IIUC Pavan means that shutting down the vNIC is still not 100% correct for single queue reset, but best we can do with current FW.
Correct. This is the best we can do at the moment to limit the scope of the reset. In the future with new FW, we should be able to limit the traffic disruption to only the queue being reset for any vNIC.
Quoted 5 lines
If we were
to split this into 2 changes, I don't think those changes would form a logical progression: reset vNIC 0 (current) -> reset all (net) -> reset the correct set of vNICs (net-next).. ?
Agreed. This progression is not ideal.
This series was applied to netdev/net.git (main) by Jakub Kicinski <[email protected]>:
Hello:
This series was applied to netdev/net.git (main)
by Jakub Kicinski <[email protected]>:
Quoted 8 lines · On Fri, 13 Jun 2025 16:18:38 -0700 you wrote:
Thie first patch fixes a crash during PCIe AER when the
bnxt_reRoCE driver is loaded. The second patch is a refactor patch needed by patch 3. Patch 3 fixes a packet drop issue if queue restart is done on a ring belonging to a non-default RSS context. Patch 2 and 3 are version 2 that has addressed the v1 issue by reducing the scope of the traffic disruptions:[...]
Here is the summary with links:
- [net,1/3] bnxt_en: Fix double invocation of bnxt_ulp_stop()/bnxt_ulp_start()
https://git.kernel.org/netdev/net/c/1e9ac33fa271 - [net,2/3] bnxt_en: Add a helper function to configure MRU and RSS https://git.kernel.org/netdev/net/c/e11baaea94e2 - [net,3/3] bnxt_en: Update MRU and RSS table of RSS contexts on queue reset https://git.kernel.org/netdev/net/c/5dacc94c6fe6
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html