Skip to contentSkip to conversation

PCI/pwrctrl: Move pci_pwrctrl_create_device() definition to drivers/pci/pwrctrl/

PATCH Superseded Manivannan Sadhasivam 2 participants 3 messages Jun 14, 2025 – Jun 16, 2025

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Manivannan Sadhasivam

author maintainer
#0 lore raw

PATCH v2 1/1 PCI/pwrctrl: Move pci_pwrctrl_create_device() definition to drivers/pci/pwrctrl/

pci_pwrctrl_create_device() is a PWRCTRL framework API. So it should be built only when CONFIG_PWRCTRL is enabled. Currently, it is built independently of CONFIG_PWRCTRL. This creates enumeration failure on platforms like brcmstb using out-of-tree devicetree that describes the power supplies for endpoints in the PCIe child node, but doesn't use PWRCTRL framework to manage the supplies. The controller driver itself manages the supplies.

But in any case, the API should be built only when CONFIG_PWRCTRL is enabled. So move its definition to drivers/pci/pwrctrl/core.c and provide a stub in drivers/pci/pci.h when CONFIG_PWRCTRL is not enabled. This also fixes the enumeration issues on the affected platforms.

---

Changes in v2:

* Dropped the unused headers from probe.c (Lukas)

 drivers/pci/pci.h          |  8 ++++++++
 drivers/pci/probe.c        | 32 --------------------------------
 drivers/pci/pwrctrl/core.c | 36 ++++++++++++++++++++++++++++++++++++
 3 files changed, 44 insertions(+), 32 deletions(-)
drivers/pci/pci.h +8 -0
index 12215ee72afb..c5efd8b9c96a 100644
@@ -1159,4 +1159,12 @@ static inline int pci_msix_write_tph_tag(struct pci_dev *pdev, unsigned int inde
 	(PCI_CONF1_ADDRESS(bus, dev, func, reg) | \
 	 PCI_CONF1_EXT_REG(reg))
 
+#ifdef CONFIG_PCI_PWRCTRL
+struct platform_device *pci_pwrctrl_create_device(struct pci_bus *bus,
+						  int devfn);
+#else
+static inline struct platform_device *
+pci_pwrctrl_create_device(struct pci_bus *bus, int devfn) { return NULL; }
+#endif
+
 #endif /* DRIVERS_PCI_H */
drivers/pci/probe.c +0 -32
index 4b8693ec9e4c..478e217928a6 100644
@@ -9,8 +9,6 @@
 #include <linux/pci.h>
 #include <linux/msi.h>
 #include <linux/of_pci.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
 #include <linux/pci_hotplug.h>
 #include <linux/slab.h>
 #include <linux/module.h>
@@ -2508,36 +2506,6 @@ bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
 }
 EXPORT_SYMBOL(pci_bus_read_dev_vendor_id);
 
-static struct platform_device *pci_pwrctrl_create_device(struct pci_bus *bus, int devfn)
-{
-	struct pci_host_bridge *host = pci_find_host_bridge(bus);
-	struct platform_device *pdev;
-	struct device_node *np;
-
-	np = of_pci_find_child_device(dev_of_node(&bus->dev), devfn);
-	if (!np || of_find_device_by_node(np))
-		return NULL;
-
-	/*
-	 * First check whether the pwrctrl device really needs to be created or
-	 * not. This is decided based on at least one of the power supplies
-	 * being defined in the devicetree node of the device.
-	 */
-	if (!of_pci_supply_present(np)) {
-		pr_debug("PCI/pwrctrl: Skipping OF node: %s\n", np->name);
-		return NULL;
-	}
-
-	/* Now create the pwrctrl device */
-	pdev = of_platform_device_create(np, NULL, &host->dev);
-	if (!pdev) {
-		pr_err("PCI/pwrctrl: Failed to create pwrctrl device for node: %s\n", np->name);
-		return NULL;
-	}
-
-	return pdev;
-}
-
 /*
  * Read the config data for a PCI device, sanity-check it,
  * and fill in the dev structure.
drivers/pci/pwrctrl/core.c +36 -0
index 6bdbfed584d6..20585b2c3681 100644
@@ -6,11 +6,47 @@
 #include <linux/device.h>
 #include <linux/export.h>
 #include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
 #include <linux/pci.h>
 #include <linux/pci-pwrctrl.h>
+#include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/slab.h>
 
+#include "../pci.h"
+
+struct platform_device *pci_pwrctrl_create_device(struct pci_bus *bus, int devfn)
+{
+	struct pci_host_bridge *host = pci_find_host_bridge(bus);
+	struct platform_device *pdev;
+	struct device_node *np;
+
+	np = of_pci_find_child_device(dev_of_node(&bus->dev), devfn);
+	if (!np || of_find_device_by_node(np))
+		return NULL;
+
+	/*
+	 * First check whether the pwrctrl device really needs to be created or
+	 * not. This is decided based on at least one of the power supplies
+	 * being defined in the devicetree node of the device.
+	 */
+	if (!of_pci_supply_present(np)) {
+		pr_debug("PCI/pwrctrl: Skipping OF node: %s\n", np->name);
+		return NULL;
+	}
+
+	/* Now create the pwrctrl device */
+	pdev = of_platform_device_create(np, NULL, &host->dev);
+	if (!pdev) {
+		pr_err("PCI/pwrctrl: Failed to create pwrctrl device for node: %s\n", np->name);
+		return NULL;
+	}
+
+	return pdev;
+}
+
 static int pci_pwrctrl_notify(struct notifier_block *nb, unsigned long action,
 			      void *data)
 {
Signature · 1 line
2.43.0
#1 lore raw
Quoted 34 lines · Manivannan Sadhasivam

pci_pwrctrl_create_device() is a PWRCTRL framework API. So it should be built only when CONFIG_PWRCTRL is enabled. Currently, it is built independently of CONFIG_PWRCTRL. This creates enumeration failure on platforms like brcmstb using out-of-tree devicetree that describes the power supplies for endpoints in the PCIe child node, but doesn't use PWRCTRL framework to manage the supplies. The controller driver itself manages the supplies.

But in any case, the API should be built only when CONFIG_PWRCTRL is enabled. So move its definition to drivers/pci/pwrctrl/core.c and provide a stub in drivers/pci/pci.h when CONFIG_PWRCTRL is not enabled. This also fixes the enumeration issues on the affected platforms.

---

Changes in v2:

* Dropped the unused headers from probe.c (Lukas)

  drivers/pci/pci.h          |  8 ++++++++
  drivers/pci/probe.c        | 32 --------------------------------
  drivers/pci/pwrctrl/core.c | 36 ++++++++++++++++++++++++++++++++++++
  3 files changed, 44 insertions(+), 32 deletions(-)
drivers/pci/pci.h +0 -0
index 12215ee72afb..c5efd8b9c96a 100644

drivers/pci/pci.h static inline int pci_msix_write_tph_tag(struct pci_dev *pdev, unsigned int inde · line 1162

Quoted 4 lines
drivers/pci/pci.h +1 -0
@@ -1159,4 +1159,12 @@ static inline int pci_msix_write_tph_tag(struct pci_dev *pdev, unsigned int inde
  	(PCI_CONF1_ADDRESS(bus, dev, func, reg) | \
  	 PCI_CONF1_EXT_REG(reg))
 
+#ifdef CONFIG_PCI_PWRCTRL

Use IS_ENABLED?

Quoted 110 lines
drivers/pci/pci.h +7 -0
+struct platform_device *pci_pwrctrl_create_device(struct pci_bus *bus,
+						  int devfn);
+#else
+static inline struct platform_device *
+pci_pwrctrl_create_device(struct pci_bus *bus, int devfn) { return NULL; }
+#endif
+
  #endif /* DRIVERS_PCI_H */
drivers/pci/probe.c +0 -32
index 4b8693ec9e4c..478e217928a6 100644
@@ -9,8 +9,6 @@
  #include <linux/pci.h>
  #include <linux/msi.h>
  #include <linux/of_pci.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
  #include <linux/pci_hotplug.h>
  #include <linux/slab.h>
  #include <linux/module.h>
@@ -2508,36 +2506,6 @@ bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
  }
  EXPORT_SYMBOL(pci_bus_read_dev_vendor_id);
 
-static struct platform_device *pci_pwrctrl_create_device(struct pci_bus *bus, int devfn)
-{
-	struct pci_host_bridge *host = pci_find_host_bridge(bus);
-	struct platform_device *pdev;
-	struct device_node *np;
-
-	np = of_pci_find_child_device(dev_of_node(&bus->dev), devfn);
-	if (!np || of_find_device_by_node(np))
-		return NULL;
-
-	/*
-	 * First check whether the pwrctrl device really needs to be created or
-	 * not. This is decided based on at least one of the power supplies
-	 * being defined in the devicetree node of the device.
-	 */
-	if (!of_pci_supply_present(np)) {
-		pr_debug("PCI/pwrctrl: Skipping OF node: %s\n", np->name);
-		return NULL;
-	}
-
-	/* Now create the pwrctrl device */
-	pdev = of_platform_device_create(np, NULL, &host->dev);
-	if (!pdev) {
-		pr_err("PCI/pwrctrl: Failed to create pwrctrl device for node: %s\n", np->name);
-		return NULL;
-	}
-
-	return pdev;
-}
-
  /*
   * Read the config data for a PCI device, sanity-check it,
   * and fill in the dev structure.
drivers/pci/pwrctrl/core.c +36 -0
index 6bdbfed584d6..20585b2c3681 100644
@@ -6,11 +6,47 @@
  #include <linux/device.h>
  #include <linux/export.h>
  #include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
  #include <linux/pci.h>
  #include <linux/pci-pwrctrl.h>
+#include <linux/platform_device.h>
  #include <linux/property.h>
  #include <linux/slab.h>
 
+#include "../pci.h"
+
+struct platform_device *pci_pwrctrl_create_device(struct pci_bus *bus, int devfn)
+{
+	struct pci_host_bridge *host = pci_find_host_bridge(bus);
+	struct platform_device *pdev;
+	struct device_node *np;
+
+	np = of_pci_find_child_device(dev_of_node(&bus->dev), devfn);
+	if (!np || of_find_device_by_node(np))
+		return NULL;
+
+	/*
+	 * First check whether the pwrctrl device really needs to be created or
+	 * not. This is decided based on at least one of the power supplies
+	 * being defined in the devicetree node of the device.
+	 */
+	if (!of_pci_supply_present(np)) {
+		pr_debug("PCI/pwrctrl: Skipping OF node: %s\n", np->name);
+		return NULL;
+	}
+
+	/* Now create the pwrctrl device */
+	pdev = of_platform_device_create(np, NULL, &host->dev);
+	if (!pdev) {
+		pr_err("PCI/pwrctrl: Failed to create pwrctrl device for node: %s\n", np->name);
+		return NULL;
+	}
+
+	return pdev;
+}
+
  static int pci_pwrctrl_notify(struct notifier_block *nb, unsigned long action,
  			      void *data)
  {
Signature · 2 lines
Sathyanarayanan Kuppuswamy
Linux Kernel Developer
author maintainer
#2 lore raw
Quoted 31 lines · Sathyanarayanan Kuppuswamy
Quoted 29 lines · Manivannan Sadhasivam

pci_pwrctrl_create_device() is a PWRCTRL framework API. So it should be built only when CONFIG_PWRCTRL is enabled. Currently, it is built independently of CONFIG_PWRCTRL. This creates enumeration failure on platforms like brcmstb using out-of-tree devicetree that describes the power supplies for endpoints in the PCIe child node, but doesn't use PWRCTRL framework to manage the supplies. The controller driver itself manages the supplies.

But in any case, the API should be built only when CONFIG_PWRCTRL is enabled. So move its definition to drivers/pci/pwrctrl/core.c and provide a stub in drivers/pci/pci.h when CONFIG_PWRCTRL is not enabled. This also fixes the enumeration issues on the affected platforms.

---

Changes in v2:

* Dropped the unused headers from probe.c (Lukas)

  drivers/pci/pci.h          |  8 ++++++++
  drivers/pci/probe.c        | 32 --------------------------------
  drivers/pci/pwrctrl/core.c | 36 ++++++++++++++++++++++++++++++++++++
  3 files changed, 44 insertions(+), 32 deletions(-)
Quoted 11 lines

drivers/pci/pci.h static inline int pci_msix_write_tph_tag(struct pci_dev *pdev, unsigned int inde · line 1161

Quoted 8 lines
drivers/pci/pci.h +1 -0
index 12215ee72afb..c5efd8b9c96a 100644
@@ -1159,4 +1159,12 @@ static inline int pci_msix_write_tph_tag(struct pci_dev *pdev, unsigned int inde
  	(PCI_CONF1_ADDRESS(bus, dev, func, reg) | \
  	 PCI_CONF1_EXT_REG(reg))
+#ifdef CONFIG_PCI_PWRCTRL

Use IS_ENABLED?

Yes, thanks for pointing it out. I should've never used ifdef here.

- Mani

Quoted 113 lines
Quoted 108 lines
drivers/pci/pci.h +7 -0
+struct platform_device *pci_pwrctrl_create_device(struct pci_bus *bus,
+						  int devfn);
+#else
+static inline struct platform_device *
+pci_pwrctrl_create_device(struct pci_bus *bus, int devfn) { return NULL; }
+#endif
+
  #endif /* DRIVERS_PCI_H */
drivers/pci/probe.c +0 -32
index 4b8693ec9e4c..478e217928a6 100644
@@ -9,8 +9,6 @@
  #include <linux/pci.h>
  #include <linux/msi.h>
  #include <linux/of_pci.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
  #include <linux/pci_hotplug.h>
  #include <linux/slab.h>
  #include <linux/module.h>
@@ -2508,36 +2506,6 @@ bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
  }
  EXPORT_SYMBOL(pci_bus_read_dev_vendor_id);
-static struct platform_device *pci_pwrctrl_create_device(struct pci_bus *bus, int devfn)
-{
-	struct pci_host_bridge *host = pci_find_host_bridge(bus);
-	struct platform_device *pdev;
-	struct device_node *np;
-
-	np = of_pci_find_child_device(dev_of_node(&bus->dev), devfn);
-	if (!np || of_find_device_by_node(np))
-		return NULL;
-
-	/*
-	 * First check whether the pwrctrl device really needs to be created or
-	 * not. This is decided based on at least one of the power supplies
-	 * being defined in the devicetree node of the device.
-	 */
-	if (!of_pci_supply_present(np)) {
-		pr_debug("PCI/pwrctrl: Skipping OF node: %s\n", np->name);
-		return NULL;
-	}
-
-	/* Now create the pwrctrl device */
-	pdev = of_platform_device_create(np, NULL, &host->dev);
-	if (!pdev) {
-		pr_err("PCI/pwrctrl: Failed to create pwrctrl device for node: %s\n", np->name);
-		return NULL;
-	}
-
-	return pdev;
-}
-
  /*
   * Read the config data for a PCI device, sanity-check it,
   * and fill in the dev structure.
drivers/pci/pwrctrl/core.c +36 -0
index 6bdbfed584d6..20585b2c3681 100644
@@ -6,11 +6,47 @@
  #include <linux/device.h>
  #include <linux/export.h>
  #include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
  #include <linux/pci.h>
  #include <linux/pci-pwrctrl.h>
+#include <linux/platform_device.h>
  #include <linux/property.h>
  #include <linux/slab.h>
+#include "../pci.h"
+
+struct platform_device *pci_pwrctrl_create_device(struct pci_bus *bus, int devfn)
+{
+	struct pci_host_bridge *host = pci_find_host_bridge(bus);
+	struct platform_device *pdev;
+	struct device_node *np;
+
+	np = of_pci_find_child_device(dev_of_node(&bus->dev), devfn);
+	if (!np || of_find_device_by_node(np))
+		return NULL;
+
+	/*
+	 * First check whether the pwrctrl device really needs to be created or
+	 * not. This is decided based on at least one of the power supplies
+	 * being defined in the devicetree node of the device.
+	 */
+	if (!of_pci_supply_present(np)) {
+		pr_debug("PCI/pwrctrl: Skipping OF node: %s\n", np->name);
+		return NULL;
+	}
+
+	/* Now create the pwrctrl device */
+	pdev = of_platform_device_create(np, NULL, &host->dev);
+	if (!pdev) {
+		pr_err("PCI/pwrctrl: Failed to create pwrctrl device for node: %s\n", np->name);
+		return NULL;
+	}
+
+	return pdev;
+}
+
  static int pci_pwrctrl_notify(struct notifier_block *nb, unsigned long action,
  			      void *data)
  {
Signature · 2 lines
Sathyanarayanan Kuppuswamy
Linux Kernel Developer
Signature · 1 line
மணிவண்ணன் சதாசிவம்