ARM Nested Virt Support
v6 cover ARM Nested Virt Support
The only change compared to v5 is the linux header update against kvm main branch. As discussed on the mailing list, KVM_ARM_VCPU_EL2_E2H0 (non VHE version of the NV support) will be dealt with in a separate add-on series. Also the fallback to TCG does not apply if the host does not support nested and virtualization=on (which is aligned with the behavior along with other arm virt machine properties such as secure, mte, ...).
For gaining virt functionality in KVM accelerated L1, The host needs to be booted with "kvm-arm.mode=nested" option and qemu needs to be invoked
with: -machine virt,virtualization=on.
This series can be found at:
https://github.com/eauger/qemu/tree/v10.0.0-nv-v6
Original version from Miguel:
[1] https://lore.kernel.org/all/[email protected]/
version from Haibo:
[2] https://lore.kernel.org/qemu-devel/[email protected]/
History:
v5 -> v6:
- linux header update against v6.16-rc2
v4 -> v5:
- rebase on top of v10.0.0
v3 -> v4:
- fix: only set maint_irq if vms->virt
v2 -> v3:
- KVM EL2 only is set if virtualization option is set
- fixes regression with virtualization=off
- Add checks against unsupported GIC configs until the kernel does
Eric Auger (1):
linux-headers: Update against v6.16-rc2
Haibo Xu (4):
hw/arm: Allow setting KVM vGIC maintenance IRQ target/arm/kvm: Add helper to detect EL2 when using KVM target/arm: Enable feature ARM_FEATURE_EL2 if EL2 is supported hw/arm/virt: Allow virt extensions with KVM
include/hw/intc/arm_gicv3_common.h | 1 + include/standard-headers/asm-x86/setup_data.h | 13 +- include/standard-headers/drm/drm_fourcc.h | 45 +++++++ include/standard-headers/linux/ethtool.h | 124 +++++++++--------- include/standard-headers/linux/fuse.h | 6 +- .../linux/input-event-codes.h | 3 +- include/standard-headers/linux/pci_regs.h | 12 +- include/standard-headers/linux/virtio_gpu.h | 3 +- include/standard-headers/linux/virtio_pci.h | 1 + linux-headers/asm-arm64/kvm.h | 9 +- linux-headers/asm-x86/kvm.h | 1 + linux-headers/linux/bits.h | 4 +- linux-headers/linux/kvm.h | 3 + linux-headers/linux/vhost.h | 4 +- target/arm/kvm_arm.h | 7 + hw/arm/virt.c | 13 +- hw/intc/arm_gicv3_common.c | 1 + hw/intc/arm_gicv3_kvm.c | 21 +++ target/arm/kvm-stub.c | 5 + target/arm/kvm.c | 21 +++ 20 files changed, 223 insertions(+), 74 deletions(-)
Signature · 1 line
2.49.0
PATCH v6 1/5 linux-headers: Update against v6.16-rc2
This is a linux header update against v6.16-rc2 (e04c78d86a96), especially targeted to get nested virt enablement.
--- include/standard-headers/asm-x86/setup_data.h | 13 +- include/standard-headers/drm/drm_fourcc.h | 45 +++++++ include/standard-headers/linux/ethtool.h | 124 +++++++++--------- include/standard-headers/linux/fuse.h | 6 +- .../linux/input-event-codes.h | 3 +- include/standard-headers/linux/pci_regs.h | 12 +- include/standard-headers/linux/virtio_gpu.h | 3 +- include/standard-headers/linux/virtio_pci.h | 1 + linux-headers/asm-arm64/kvm.h | 9 +- linux-headers/asm-x86/kvm.h | 1 + linux-headers/linux/bits.h | 4 +- linux-headers/linux/kvm.h | 3 + linux-headers/linux/vhost.h | 4 +- 13 files changed, 155 insertions(+), 73 deletions(-)
include/standard-headers/asm-x86/setup_data.h +12 -1
@@ -13,7 +13,8 @@#define SETUP_CC_BLOB 7#define SETUP_IMA 8#define SETUP_RNG_SEED 9 -#define SETUP_ENUM_MAX SETUP_RNG_SEED +#define SETUP_KEXEC_KHO 10 +#define SETUP_ENUM_MAX SETUP_KEXEC_KHO#define SETUP_INDIRECT (1<<31)#define SETUP_TYPE_MAX (SETUP_ENUM_MAX | SETUP_INDIRECT)
@@ -78,6 +79,16 @@ struct ima_setup_data {uint64_t size; } QEMU_PACKED; +/* +* Locations of kexec handover metadata +*/ +struct kho_data { +uint64_t fdt_addr; +uint64_t fdt_size; +uint64_t scratch_addr; +uint64_t scratch_size; +}QEMU_PACKED ; +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_SETUP_DATA_H */
include/standard-headers/drm/drm_fourcc.h +45 -0
57 lines not on this page · raw message
include/standard-headers/linux/ethtool.h +64 -60
135 lines not on this page · raw message
include/standard-headers/linux/fuse.h +5 -1
@@ -232,6 +232,9 @@* * 7.43 * - add FUSE_REQUEST_TIMEOUT +* +* 7.44 +* - add FUSE_NOTIFY_INC_EPOCH */ #ifndef _LINUX_FUSE_H
@@ -263,7 +266,7 @@#define FUSE_KERNEL_VERSION 7/** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 43 +#define FUSE_KERNEL_MINOR_VERSION 44/** The node ID of the root inode */ #define FUSE_ROOT_ID 1
@@ -667,6 +670,7 @@ enum fuse_notify_code {FUSE_NOTIFY_RETRIEVE =5 ,FUSE_NOTIFY_DELETE =6 ,FUSE_NOTIFY_RESEND =7 , +FUSE_NOTIFY_INC_EPOCH =8 , FUSE_NOTIFY_CODE_MAX, };
include/standard-headers/linux/input-event-codes.h +2 -1
@@ -925,7 +925,8 @@#define SW_MUTE_DEVICE 0x0e/* set = device disabled */ #define SW_PEN_INSERTED 0x0f/* set = pen inserted */ #define SW_MACHINE_COVER 0x10/* set = cover closed */ -#define SW_MAX_ 0x10 +#define SW_USB_INSERT 0x11/* set = USB audio device connected */ +#define SW_MAX_ 0x11#define SW_CNT (SW_MAX_+1)/*
include/standard-headers/linux/pci_regs.h +11 -1
@@ -750,7 +750,8 @@#define PCI_EXT_CAP_ID_NPEM 0x29/* Native PCIe Enclosure Management */ #define PCI_EXT_CAP_ID_PL_32GT 0x2A/* Physical Layer 32.0 GT/s */ #define PCI_EXT_CAP_ID_DOE 0x2E/* Data Object Exchange */ -#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_DOE +#define PCI_EXT_CAP_ID_PL_64GT 0x31/* Physical Layer 64.0 GT/s */ +#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PL_64GT#define PCI_EXT_CAP_DSN_SIZEOF 12#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40
@@ -1144,12 +1145,21 @@#define PCI_DLF_CAP 0x04/* Capabilities Register */ #define PCI_DLF_EXCHANGE_ENABLE 0x80000000/* Data Link Feature Exchange Enable */ +/* Secondary PCIe Capability 8.0 GT/s */ +#define PCI_SECPCI_LE_CTRL 0x0c/* Lane Equalization Control Register */ +/* Physical Layer 16.0 GT/s */ #define PCI_PL_16GT_LE_CTRL 0x20/* Lane Equalization Control Register */ #define PCI_PL_16GT_LE_CTRL_DSP_TX_PRESET_MASK 0x0000000F#define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_MASK 0x000000F0#define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_SHIFT 4 +/* Physical Layer 32.0 GT/s */ +#define PCI_PL_32GT_LE_CTRL 0x20/* Lane Equalization Control Register */ + +/* Physical Layer 64.0 GT/s */ +#define PCI_PL_64GT_LE_CTRL 0x20/* Lane Equalization Control Register */ +/* Native PCIe Enclosure Management */ #define PCI_NPEM_CAP 0x04/* NPEM capability register */ #define PCI_NPEM_CAP_CAPABLE 0x00000001/* NPEM Capable */
include/standard-headers/linux/virtio_gpu.h +2 -1
@@ -309,8 +309,9 @@ struct virtio_gpu_cmd_submit {#define VIRTIO_GPU_CAPSET_VIRGL 1#define VIRTIO_GPU_CAPSET_VIRGL2 2 -/* 3 is reserved for gfxstream */ +#define VIRTIO_GPU_CAPSET_GFXSTREAM_VULKAN 3#define VIRTIO_GPU_CAPSET_VENUS 4 +#define VIRTIO_GPU_CAPSET_CROSS_DOMAIN 5#define VIRTIO_GPU_CAPSET_DRM 6/* VIRTIO_GPU_CMD_GET_CAPSET_INFO */
include/standard-headers/linux/virtio_pci.h +1 -0
@@ -246,6 +246,7 @@ struct virtio_pci_cfg_cap {#define VIRTIO_ADMIN_CMD_LIST_USE 0x1/* Admin command group type. */ +#define VIRTIO_ADMIN_GROUP_TYPE_SELF 0x0#define VIRTIO_ADMIN_GROUP_TYPE_SRIOV 0x1/* Transitional device admin command. */
linux-headers/asm-arm64/kvm.h +5 -4
@@ -419,10 +419,11 @@ enum {/* Device Control API on vcpu fd */ #define KVM_ARM_VCPU_PMU_V3_CTRL 0 -#define KVM_ARM_VCPU_PMU_V3_IRQ 0 -#define KVM_ARM_VCPU_PMU_V3_INIT 1 -#define KVM_ARM_VCPU_PMU_V3_FILTER 2 -#define KVM_ARM_VCPU_PMU_V3_SET_PMU 3 +#define KVM_ARM_VCPU_PMU_V3_IRQ 0 +#define KVM_ARM_VCPU_PMU_V3_INIT 1 +#define KVM_ARM_VCPU_PMU_V3_FILTER 2 +#define KVM_ARM_VCPU_PMU_V3_SET_PMU 3 +#define KVM_ARM_VCPU_PMU_V3_SET_NR_COUNTERS 4#define KVM_ARM_VCPU_TIMER_CTRL 1#define KVM_ARM_VCPU_TIMER_IRQ_VTIMER 0#define KVM_ARM_VCPU_TIMER_IRQ_PTIMER 1
linux-headers/asm-x86/kvm.h +1 -0
@@ -843,6 +843,7 @@ struct kvm_sev_snp_launch_start { };/* Kept in sync with firmware values for simplicity. */ +#define KVM_SEV_PAGE_TYPE_INVALID 0x0#define KVM_SEV_SNP_PAGE_TYPE_NORMAL 0x1#define KVM_SEV_SNP_PAGE_TYPE_ZERO 0x3#define KVM_SEV_SNP_PAGE_TYPE_UNMEASURED 0x4
linux-headers/linux/bits.h +2 -2
@@ -4,9 +4,9 @@#ifndef _LINUX_BITS_H#define _LINUX_BITS_H -#define __GENMASK (h, l) (((~_UL(0)) << (l)) & (~_UL(0) >> (BITS_PER_LONG - 1 - (h)))) +#define __GENMASK (h, l) (((~_UL(0)) << (l)) & (~_UL(0) >> (__BITS_PER_LONG - 1 - (h)))) -#define __GENMASK_ULL (h, l) (((~_ULL(0)) << (l)) & (~_ULL(0) >> (BITS_PER_LONG_LONG - 1 - (h)))) +#define __GENMASK_ULL (h, l) (((~_ULL(0)) << (l)) & (~_ULL(0) >> (__BITS_PER_LONG_LONG - 1 - (h))))#define __GENMASK_U128 (h, l) \ ((_BIT128((h)) << 1) - (_BIT128(l)))
linux-headers/linux/kvm.h +3 -0
@@ -923,6 +923,9 @@ struct kvm_enable_cap {#define KVM_CAP_X86_APIC_BUS_CYCLES_NS 237#define KVM_CAP_X86_GUEST_MODE 238#define KVM_CAP_ARM_WRITABLE_IMP_ID_REGS 239 +#define KVM_CAP_ARM_EL2 240 +#define KVM_CAP_ARM_EL2_E2H0 241 +#define KVM_CAP_RISCV_MP_STATE_RESET 242struct kvm_irq_routing_irqchip {__u32 irqchip;
linux-headers/linux/vhost.h +2 -2
@@ -28,10 +28,10 @@/* Set current process as the (exclusive) owner of this file descriptor. This * must be called before any other vhost command. Further calls to -* VHOST_OWNER_SET fail until VHOST_OWNER_RESET is called. */ +* VHOST_SET_OWNER fail until VHOST_RESET_OWNER is called. */ #define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01)/* Give up ownership, and reset the device to default values. -* Allows subsequent call to VHOST_OWNER_SET to succeed. */ +* Allows subsequent call to VHOST_SET_OWNER to succeed. */ #define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02)/* Set up/modify memory layout */
Signature · 1 line
2.49.0
PATCH v6 2/5 hw/arm: Allow setting KVM vGIC maintenance IRQ
In reply to Eric AugerFrom: Haibo Xu <[email protected]>
Allow virt arm machine to set the interrupt ID for the KVM GIC maintenance interrupt.
This setting must be done before the KVM_DEV_ARM_VGIC_CTRL_INIT hence the choice to perform the setting in the GICv3 realize instead of proceeding the same way as kvm_arm_pmu_set_irq().
---
v3 -> v4:
- only set maint_irq if vms->virt
v2 -> v3:
- tweak the commit message and explain why we do not proceed the same way as kvm_arm_pmu_set_irq (Peter)
v1 -> v2:
- [Miguel] replaced the has_virt_extensions by the maintenance irq intid property. [Eric] restored kvm_device_check_attr and kvm_device_access standard usage and conditionally call those if the prop is set.
--- include/hw/intc/arm_gicv3_common.h | 1 + hw/arm/virt.c | 3 +++ hw/intc/arm_gicv3_common.c | 1 + hw/intc/arm_gicv3_kvm.c | 21 +++++++++++++++++++++ 4 files changed, 26 insertions(+)
include/hw/intc/arm_gicv3_common.h +1 -0
@@ -231,6 +231,7 @@ struct GICv3State {uint32_t num_cpu;uint32_t num_irq;uint32_t revision; +uint32_t maint_irq;bool lpi_enable;bool nmi_support;bool security_extn;
hw/arm/virt.c +3 -0
@@ -831,6 +831,9 @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) OBJECT(mem), &error_fatal);qdev_prop_set_bit (vms->gic,"has-lpi" , true); } + }else if (vms->virt) { +qdev_prop_set_uint32 (vms->gic,"maintenance-interrupt-id" , +ARCH_GIC_MAINT_IRQ ); } }else {if (!kvm_irqchip_in_kernel ()) {
hw/intc/arm_gicv3_common.c +1 -0
@@ -612,6 +612,7 @@ static const Property arm_gicv3_common_properties[] = {DEFINE_PROP_BOOL ("has-lpi" , GICv3State, lpi_enable,0 ),DEFINE_PROP_BOOL ("has-nmi" , GICv3State, nmi_support,0 ),DEFINE_PROP_BOOL ("has-security-extensions" , GICv3State, security_extn,0 ), +DEFINE_PROP_UINT32 ("maintenance-interrupt-id" , GICv3State, maint_irq,0 ),/* * Compatibility property: force 8 bits of physical priority, even * if the CPU being emulated should have fewer.
hw/intc/arm_gicv3_kvm.c +21 -0
@@ -22,6 +22,7 @@#include "qemu/osdep.h" #include "qapi/error.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/arm/virt.h" #include "qemu/error-report.h" #include "qemu/module.h" #include "system/kvm.h"
@@ -825,6 +826,26 @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp)return ; } +if (s->maint_irq) { +int ret; + + ret =kvm_device_check_attr (s->dev_fd, +KVM_DEV_ARM_VGIC_GRP_MAINT_IRQ ,0 ); +if (!ret) { +error_setg_errno (errp, errno, +"VGICv3 setting maintenance IRQ is not " +"supported by this host kernel" ); +return ; + } + + ret =kvm_device_access (s->dev_fd,KVM_DEV_ARM_VGIC_GRP_MAINT_IRQ ,0 , + &s->maint_irq, true, errp); +if (ret) { +error_setg_errno (errp, errno,"Failed to set VGIC maintenance IRQ" ); +return ; + } + } + multiple_redist_region_allowed =kvm_device_check_attr (s->dev_fd,KVM_DEV_ARM_VGIC_GRP_ADDR ,KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION );
Signature · 1 line
2.49.0
PATCH v6 3/5 target/arm/kvm: Add helper to detect EL2 when using KVM
In reply to Eric AugerFrom: Haibo Xu <[email protected]>
Introduce query support for KVM_CAP_ARM_EL2.
--- target/arm/kvm_arm.h | 7 +++++++ target/arm/kvm-stub.c | 5 +++++ target/arm/kvm.c | 5 +++++ 3 files changed, 17 insertions(+)
target/arm/kvm_arm.h +7 -0
@@ -191,6 +191,13 @@ bool kvm_arm_sve_supported(void);*/ bool kvm_arm_mte_supported (void ); +/** +* kvm_arm_el2_supported: +* +* Returns true if KVM can enable EL2 and false otherwise. +*/ +bool kvm_arm_el2_supported (void ); +/** * kvm_arm_get_max_vm_ipa_size: * @ms: Machine state handle
target/arm/kvm-stub.c +5 -0
@@ -47,6 +47,11 @@ bool kvm_arm_mte_supported(void)return false; } +bool kvm_arm_el2_supported (void ) +{ +return false; +} +/* * These functions should never actually be called without KVM support. */
target/arm/kvm.c +5 -0
@@ -1769,6 +1769,11 @@ bool kvm_arm_aarch32_supported(void)return kvm_check_extension (kvm_state,KVM_CAP_ARM_EL1_32BIT ); } +bool kvm_arm_el2_supported (void ) +{ +return kvm_check_extension (kvm_state,KVM_CAP_ARM_EL2 ); +} +bool kvm_arm_sve_supported (void ) {return kvm_check_extension (kvm_state,KVM_CAP_ARM_SVE );
Signature · 1 line
2.49.0
PATCH v6 4/5 target/arm: Enable feature ARM_FEATURE_EL2 if EL2 is supported
In reply to Eric AugerFrom: Haibo Xu <[email protected]>
KVM_CAP_ARM_EL2 must be supported by the cpu to enable ARM_FEATURE_EL2. In case the host does support NV, expose the feature.
---
v2 -> v3:
- check pmu->has_el2 on kvm_arch_init_vcpu() when setting KVM_ARM_VCPU_HAS_EL2 feature (Peter)
v1 -> v2:
- remove isar_feature_aa64_aa32_el2 modif in target/arm/cpu.h [Richard] and use el2_supported in kvm_arch_init_vcpu
--- target/arm/kvm.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
target/arm/kvm.c +16 -0
@@ -227,6 +227,7 @@ static bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf)*/ int fdarray[3 ];bool sve_supported; +bool el2_supported;bool pmu_supported = false;uint64_t features =0 ;int err;
@@ -246,6 +247,14 @@ static bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) init.features[0 ] |=1 <<KVM_ARM_VCPU_SVE ; } +/* +* Ask for EL2 if supported. +*/ + el2_supported =kvm_arm_el2_supported (); +if (el2_supported) { + init.features[0 ] |=1 <<KVM_ARM_VCPU_HAS_EL2 ; + } +/* * Ask for Pointer Authentication if supported, so that we get * the unsanitized field values for AA64ISAR1_EL1.
@@ -429,6 +438,10 @@ static bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) features |=1ULL <<ARM_FEATURE_AARCH64 ; features |=1ULL <<ARM_FEATURE_GENERIC_TIMER ; +if (el2_supported) { + features |=1ULL <<ARM_FEATURE_EL2 ; + } + ahcf->features = features;return true;
@@ -1894,6 +1907,9 @@ int kvm_arch_init_vcpu(CPUState *cs) cpu->kvm_init_features[0 ] |= (1 <<KVM_ARM_VCPU_PTRAUTH_ADDRESS |1 <<KVM_ARM_VCPU_PTRAUTH_GENERIC ); } +if (cpu->has_el2 &&kvm_arm_el2_supported ()) { + cpu->kvm_init_features[0 ] |=1 <<KVM_ARM_VCPU_HAS_EL2 ; + }/* Do KVM_ARM_VCPU_INIT ioctl */ ret =kvm_arm_vcpu_init (cpu);
Signature · 1 line
2.49.0
PATCH v6 5/5 hw/arm/virt: Allow virt extensions with KVM
In reply to Eric AugerFrom: Haibo Xu <[email protected]>
Up to now virt support on guest has been only supported with TCG. Now it becomes feasible to use it with KVM acceleration.
Also check only in-kernel GICv3 is used along with KVM EL2.
---
v2 -> v3:
- check gic version/in-kernel implementation when kvm el2 is set (Peter)
v1 -> v2:
- fixed test ordering: virt && ((kvm && !kvm_el2) || hvf) [Richard]
- tweeked the commit title & message
--- hw/arm/virt.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
hw/arm/virt.c +9 -1
@@ -795,6 +795,13 @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem)default :g_assert_not_reached (); } + +if (kvm_enabled () && vms->virt && + (revision !=3 || !kvm_irqchip_in_kernel ())) { +error_report ("KVM EL2 only is supported with in-kernel GICv3" ); +exit (1 ); + } + vms->gic =qdev_new (gictype);qdev_prop_set_uint32 (vms->gic,"revision" , revision);qdev_prop_set_uint32 (vms->gic,"num-cpu" , smp_cpus);
@@ -2208,7 +2215,8 @@ static void machvirt_init(MachineState *machine)exit (1 ); } -if (vms->virt && (kvm_enabled () ||hvf_enabled ())) { +if (vms->virt && + ((kvm_enabled () && !kvm_arm_el2_supported ()) ||hvf_enabled ())) {error_report ("mach-virt: %s does not support providing " "Virtualization extensions to the guest CPU" ,current_accel_name ());
Signature · 1 line
2.49.0
Hi,
Quoted 11 lines · Eric Auger
The only change compared to v5 is the linux header update against kvm main branch. As discussed on the mailing list,
KVM_ARM_VCPU_EL2_E2H0(non VHE version of the NV support) will be dealt with in a separate add-on series. Also the fallback to TCG does not apply if the host does not support nested and virtualization=on (which is aligned with the behavior along with other arm virt machine properties such as secure, mte, ...).For gaining virt functionality in KVM accelerated L1, The host needs to be booted with "kvm-arm.mode=nested" option and qemu needs to be invoked
with: -machine virt,virtualization=on.
Gentle ping on this series. Any other comment? Missing R-b's/A-b's on the 2 first patches.
Thanks
Eric
Quoted 56 lines
This series can be found at:
https://github.com/eauger/qemu/tree/v10.0.0-nv-v6Original version from Miguel:
[1] https://lore.kernel.org/all/[email protected]/
version from Haibo:
[2] https://lore.kernel.org/qemu-devel/[email protected]/History:
v5 -> v6:
- linux header update against v6.16-rc2v4 -> v5:
- rebase on top of v10.0.0v3 -> v4:
- fix: only setmaint_irqifvms->virtv2 -> v3:
- KVM EL2 only is set if virtualization option is set
- fixes regression with virtualization=off
- Add checks against unsupported GIC configs until the kernel doesEric Auger (1):
linux-headers: Update against v6.16-rc2Haibo Xu (4):
hw/arm: Allow setting KVM vGIC maintenance IRQ target/arm/kvm: Add helper to detect EL2 when using KVM target/arm: Enable featureARM_FEATURE_EL2if EL2 is supported hw/arm/virt: Allow virt extensions with KVMinclude/hw/intc/arm_gicv3_common.h | 1 + include/standard-headers/asm-x86/setup_data.h | 13 +- include/standard-headers/drm/drm_fourcc.h | 45 +++++++ include/standard-headers/linux/ethtool.h | 124 +++++++++--------- include/standard-headers/linux/fuse.h | 6 +- .../linux/input-event-codes.h | 3 +- include/standard-headers/linux/pci_regs.h | 12 +- include/standard-headers/linux/virtio_gpu.h | 3 +- include/standard-headers/linux/virtio_pci.h | 1 + linux-headers/asm-arm64/kvm.h | 9 +- linux-headers/asm-x86/kvm.h | 1 + linux-headers/linux/bits.h | 4 +- linux-headers/linux/kvm.h | 3 + linux-headers/linux/vhost.h | 4 +- target/arm/kvm_arm.h | 7 + hw/arm/virt.c | 13 +- hw/intc/arm_gicv3_common.c | 1 + hw/intc/arm_gicv3_kvm.c | 21 +++ target/arm/kvm-stub.c | 5 + target/arm/kvm.c | 21 +++ 20 files changed, 223 insertions(+), 74 deletions(-)