Linux 6.6.94
Greg Kroah-Hartman
maintainerI'm announcing the release of the 6.6.94 kernel.
All users of the 6.6 kernel series must upgrade.
The updated 6.6.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-6.6.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml | 3 Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml | 12 Documentation/devicetree/bindings/usb/cypress,hx3.yaml | 19 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 Makefile | 2 arch/arm/boot/dts/microchip/at91sam9263ek.dts | 2 arch/arm/boot/dts/microchip/tny_a9263.dts | 2 arch/arm/boot/dts/microchip/usb_a9263.dts | 4 arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 15 arch/arm/mach-aspeed/Kconfig | 1 arch/arm64/Kconfig | 6 arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts | 1 arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi | 1 arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts | 1 arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi | 1 arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi | 1 arch/arm64/boot/dts/mediatek/mt6357.dtsi | 10 arch/arm64/boot/dts/mediatek/mt6359.dtsi | 4 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 50 +- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 12 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 12 arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 3 arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts | 2 arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts | 3 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 16 arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 arch/arm64/boot/dts/qcom/sm8350.dtsi | 6 arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso | 2 arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 8 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi | 5 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 19 arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 1 arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 166 +++++++ arch/arm64/configs/defconfig | 3 arch/arm64/include/asm/esr.h | 14 arch/arm64/include/asm/fpsimd.h | 3 arch/arm64/kernel/entry-common.c | 46 +- arch/arm64/kernel/fpsimd.c | 21 arch/arm64/xen/hypercall.S | 21 arch/m68k/mac/config.c | 2 arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts | 1 arch/powerpc/kernel/Makefile | 2 arch/powerpc/kexec/crash.c | 5 arch/powerpc/platforms/book3s/vas-api.c | 9 arch/powerpc/platforms/powernv/memtrace.c | 8 arch/riscv/kvm/vcpu_sbi.c | 4 arch/s390/net/bpf_jit_comp.c | 12 arch/x86/include/asm/mwait.h | 9 arch/x86/kernel/cpu/common.c | 17 arch/x86/kernel/cpu/microcode/core.c | 2 arch/x86/kernel/cpu/mtrr/generic.c | 2 arch/x86/kernel/ioport.c | 13 arch/x86/kernel/process.c | 15 crypto/lrw.c | 4 crypto/xts.c | 4 drivers/acpi/acpica/exserial.c | 6 drivers/acpi/apei/Kconfig | 1 drivers/acpi/apei/ghes.c | 2 drivers/acpi/cppc_acpi.c | 2 drivers/acpi/osi.c | 1 drivers/base/power/domain.c | 2 drivers/base/power/main.c | 3 drivers/bluetooth/hci_qca.c | 14 drivers/bus/fsl-mc/fsl-mc-bus.c | 6 drivers/clk/bcm/clk-raspberrypi.c | 2 drivers/clk/qcom/camcc-sm6350.c | 18 drivers/clk/qcom/dispcc-sm6350.c | 3 drivers/clk/qcom/gcc-msm8939.c | 4 drivers/clk/qcom/gcc-sm6350.c | 6 drivers/clk/qcom/gpucc-sm6350.c | 6 drivers/counter/interrupt-cnt.c | 9 drivers/cpufreq/acpi-cpufreq.c | 2 drivers/crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c | 7 drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c | 34 - drivers/crypto/allwinner/sun8i-ce/sun8i-ce.h | 2 drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c | 2 drivers/crypto/marvell/cesa/cipher.c | 3 drivers/crypto/marvell/cesa/hash.c | 2 drivers/dma/ti/k3-udma.c | 3 drivers/edac/i10nm_base.c | 35 - drivers/edac/skx_common.c | 1 drivers/edac/skx_common.h | 11 drivers/firmware/Kconfig | 1 drivers/firmware/arm_sdei.c | 11 drivers/firmware/efi/libstub/efi-stub-helper.c | 1 drivers/firmware/psci/psci.c | 4 drivers/fpga/tests/fpga-mgr-test.c | 1 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 16 drivers/gpu/drm/amd/pm/powerplay/hwmgr/ppatomctrl.c | 8 drivers/gpu/drm/bridge/lontium-lt9611uxc.c | 6 drivers/gpu/drm/mediatek/mtk_drm_drv.c | 31 + drivers/gpu/drm/meson/meson_drv.c | 2 drivers/gpu/drm/meson/meson_drv.h | 2 drivers/gpu/drm/meson/meson_encoder_hdmi.c | 29 - drivers/gpu/drm/meson/meson_vclk.c | 226 +++++----- drivers/gpu/drm/meson/meson_vclk.h | 13 drivers/gpu/drm/renesas/rcar-du/rcar_du_kms.c | 10 drivers/gpu/drm/tegra/rgb.c | 14 drivers/gpu/drm/vc4/tests/vc4_mock_output.c | 36 + drivers/gpu/drm/vkms/vkms_crtc.c | 2 drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 26 + drivers/hid/hid-hyperv.c | 4 drivers/hid/usbhid/hid-core.c | 25 - drivers/hwmon/asus-ec-sensors.c | 4 drivers/hwtracing/coresight/coresight-config.h | 2 drivers/hwtracing/coresight/coresight-syscfg.c | 49 +- drivers/iio/adc/ad7124.c | 4 drivers/iio/filter/admv8818.c | 224 +++++++-- drivers/infiniband/core/cm.c | 16 drivers/infiniband/core/cma.c | 3 drivers/infiniband/hw/hns/hns_roce_ah.c | 1 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 1 drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 1 drivers/infiniband/hw/hns/hns_roce_main.c | 1 drivers/infiniband/hw/hns/hns_roce_restrack.c | 1 drivers/infiniband/hw/mlx5/qpc.c | 30 + drivers/input/rmi4/rmi_f34.c | 135 +++-- drivers/iommu/Kconfig | 1 drivers/iommu/iommu.c | 4 drivers/md/dm-flakey.c | 70 +-- drivers/md/dm.c | 30 - drivers/mfd/exynos-lpass.c | 1 drivers/mfd/stmpe-spi.c | 2 drivers/misc/vmw_vmci/vmci_host.c | 11 drivers/mtd/nand/ecc-mxic.c | 2 drivers/net/bonding/bond_main.c | 25 - drivers/net/dsa/b53/b53_common.c | 23 - drivers/net/ethernet/google/gve/gve_main.c | 2 drivers/net/ethernet/google/gve/gve_tx_dqo.c | 3 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 11 drivers/net/ethernet/intel/ice/ice_main.c | 47 +- drivers/net/ethernet/intel/ice/ice_sched.c | 181 ++++++-- drivers/net/ethernet/marvell/octeontx2/nic/qos.c | 4 drivers/net/ethernet/mediatek/mtk_star_emac.c | 4 drivers/net/ethernet/mellanox/mlx4/en_clock.c | 2 drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c | 2 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 12 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 21 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 5 drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c | 2 drivers/net/ethernet/microchip/lan743x_main.c | 4 drivers/net/ethernet/microchip/lan966x/lan966x_main.c | 7 drivers/net/ethernet/microchip/lan966x/lan966x_main.h | 6 drivers/net/ethernet/microchip/lan966x/lan966x_ptp.c | 49 +- drivers/net/ethernet/microchip/lan966x/lan966x_switchdev.c | 1 drivers/net/ethernet/microchip/lan966x/lan966x_vlan.c | 21 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 11 drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 2 drivers/net/macsec.c | 40 + drivers/net/phy/mdio_bus.c | 12 drivers/net/phy/mscc/mscc_ptp.c | 20 drivers/net/phy/phy_device.c | 4 drivers/net/usb/aqc111.c | 10 drivers/net/vmxnet3/vmxnet3_drv.c | 26 + drivers/net/wireguard/device.c | 1 drivers/net/wireless/ath/ath10k/snoc.c | 4 drivers/net/wireless/ath/ath11k/core.c | 37 - drivers/net/wireless/ath/ath11k/core.h | 4 drivers/net/wireless/ath/ath11k/debugfs.c | 62 +- drivers/net/wireless/ath/ath11k/mac.c | 4 drivers/net/wireless/ath/ath11k/wmi.c | 2 drivers/net/wireless/ath/ath12k/core.c | 8 drivers/net/wireless/ath/ath12k/dp_rx.c | 9 drivers/net/wireless/ath/ath12k/wmi.c | 3 drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 3 drivers/net/wireless/mediatek/mt76/mt7915/mmio.c | 6 drivers/net/wireless/mediatek/mt76/mt7996/dma.c | 4 drivers/net/wireless/mediatek/mt76/mt7996/init.c | 3 drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h | 3 drivers/net/wireless/realtek/rtw88/coex.c | 2 drivers/net/wireless/realtek/rtw88/rtw8822c.c | 3 drivers/net/wireless/realtek/rtw88/sdio.c | 10 drivers/net/wwan/t7xx/t7xx_netdev.c | 11 drivers/nvme/target/fcloop.c | 31 - drivers/pci/controller/cadence/pcie-cadence-host.c | 11 drivers/pci/controller/pcie-apple.c | 4 drivers/pci/pci.c | 2 drivers/pci/pcie/dpc.c | 2 drivers/perf/amlogic/meson_ddr_pmu_core.c | 2 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 6 drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 14 drivers/pinctrl/pinctrl-at91.c | 6 drivers/pinctrl/qcom/pinctrl-qcm2290.c | 9 drivers/power/reset/at91-reset.c | 5 drivers/ptp/ptp_private.h | 12 drivers/regulator/max20086-regulator.c | 6 drivers/remoteproc/qcom_wcnss_iris.c | 2 drivers/remoteproc/ti_k3_r5_remoteproc.c | 8 drivers/rpmsg/qcom_smd.c | 2 drivers/rtc/class.c | 2 drivers/rtc/lib.c | 24 - drivers/rtc/rtc-loongson.c | 8 drivers/rtc/rtc-sh.c | 12 drivers/scsi/hisi_sas/hisi_sas_main.c | 29 - drivers/scsi/qedf/qedf_main.c | 2 drivers/scsi/scsi_transport_iscsi.c | 11 drivers/soc/aspeed/aspeed-lpc-snoop.c | 17 drivers/spi/spi-bcm63xx-hsspi.c | 2 drivers/spi/spi-bcm63xx.c | 2 drivers/spi/spi-sh-msiof.c | 13 drivers/spi/spi-tegra210-quad.c | 24 - drivers/staging/media/rkvdec/rkvdec.c | 10 drivers/thunderbolt/ctl.c | 5 drivers/thunderbolt/usb4.c | 4 drivers/tty/serial/jsm/jsm_tty.c | 1 drivers/tty/serial/milbeaut_usio.c | 5 drivers/tty/serial/sh-sci.c | 81 ++- drivers/tty/vt/vt_ioctl.c | 2 drivers/ufs/core/ufs-mcq.c | 6 drivers/ufs/core/ufshcd.c | 7 drivers/ufs/host/ufs-qcom.c | 5 drivers/usb/cdns3/cdnsp-gadget.c | 21 drivers/usb/cdns3/cdnsp-gadget.h | 4 drivers/usb/class/usbtmc.c | 21 drivers/usb/core/hub.c | 16 drivers/usb/core/quirks.c | 3 drivers/usb/gadget/function/f_hid.c | 12 drivers/usb/renesas_usbhs/common.c | 50 +- drivers/usb/serial/pl2303.c | 2 drivers/usb/storage/unusual_uas.h | 7 drivers/usb/typec/tcpm/tcpci_maxim_core.c | 3 drivers/usb/typec/ucsi/ucsi.h | 2 drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c | 79 ++- drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h | 14 drivers/vfio/vfio_iommu_type1.c | 2 drivers/video/backlight/qcom-wled.c | 6 drivers/video/fbdev/core/fbcvt.c | 2 drivers/watchdog/exar_wdt.c | 2 drivers/xen/balloon.c | 13 fs/btrfs/scrub.c | 34 + fs/f2fs/data.c | 4 fs/f2fs/f2fs.h | 10 fs/f2fs/namei.c | 10 fs/f2fs/super.c | 4 fs/filesystems.c | 14 fs/gfs2/inode.c | 3 fs/kernfs/dir.c | 5 fs/kernfs/file.c | 3 fs/namespace.c | 25 - fs/nfs/super.c | 19 fs/nilfs2/btree.c | 4 fs/nilfs2/direct.c | 3 fs/ntfs3/index.c | 8 fs/ocfs2/quota_local.c | 2 fs/smb/client/cifssmb.c | 20 fs/squashfs/super.c | 5 include/linux/arm_sdei.h | 4 include/linux/bio.h | 2 include/linux/bvec.h | 7 include/linux/hid.h | 3 include/linux/io_uring_types.h | 3 include/linux/mdio.h | 5 include/linux/mlx5/driver.h | 1 include/linux/phy.h | 5 include/net/bluetooth/hci_core.h | 2 include/net/sock.h | 7 io_uring/io_uring.c | 10 io_uring/io_uring.h | 12 io_uring/kbuf.c | 3 io_uring/poll.c | 2 io_uring/rw.c | 26 - kernel/bpf/core.c | 29 - kernel/events/core.c | 50 +- kernel/power/hibernate.c | 5 kernel/power/main.c | 3 kernel/power/power.h | 4 kernel/power/wakelock.c | 3 kernel/rcu/tree.c | 10 kernel/rcu/tree.h | 2 kernel/rcu/tree_stall.h | 4 kernel/time/posix-cpu-timers.c | 9 kernel/trace/bpf_trace.c | 2 kernel/trace/trace.c | 2 kernel/trace/trace.h | 8 kernel/trace/trace_events_hist.c | 122 ++++- kernel/trace/trace_events_trigger.c | 20 lib/kunit/static_stub.c | 2 mm/kasan/report.c | 4 mm/kasan/shadow.c | 2 net/bluetooth/eir.c | 10 net/bluetooth/hci_core.c | 16 net/bluetooth/hci_sync.c | 20 net/bluetooth/l2cap_core.c | 3 net/bluetooth/mgmt.c | 140 ++---- net/bluetooth/mgmt_util.c | 49 +- net/bluetooth/mgmt_util.h | 8 net/bridge/netfilter/nf_conntrack_bridge.c | 12 net/core/skmsg.c | 53 +- net/dsa/tag_brcm.c | 2 net/ipv4/udp_offload.c | 5 net/ipv6/netfilter.c | 12 net/ipv6/netfilter/nft_fib_ipv6.c | 13 net/ipv6/seg6_local.c | 6 net/ncsi/internal.h | 21 net/ncsi/ncsi-pkt.h | 23 - net/ncsi/ncsi-rsp.c | 21 net/netfilter/nf_nat_core.c | 12 net/netfilter/nft_quota.c | 20 net/netfilter/nft_set_pipapo_avx2.c | 21 net/netfilter/nft_tunnel.c | 8 net/netlabel/netlabel_kapi.c | 5 net/openvswitch/flow.c | 2 net/sched/sch_ets.c | 2 net/sched/sch_prio.c | 2 net/sched/sch_red.c | 2 net/sched/sch_sfq.c | 5 net/sched/sch_tbf.c | 2 net/tipc/crypto.c | 6 net/tls/tls_sw.c | 15 net/xfrm/xfrm_device.c | 2 net/xfrm/xfrm_state.c | 2 scripts/Makefile.extrawarn | 12 scripts/gcc-plugins/gcc-common.h | 32 + scripts/gcc-plugins/randomize_layout_plugin.c | 40 - sound/soc/apple/mca.c | 23 + sound/soc/codecs/hda.c | 4 sound/soc/codecs/tas2764.c | 2 sound/soc/intel/avs/debugfs.c | 6 sound/soc/intel/avs/ipc.c | 4 sound/soc/sof/ipc4-pcm.c | 3 sound/soc/ti/omap-hdmi.c | 7 sound/usb/implicit.c | 1 tools/arch/x86/kcpuid/kcpuid.c | 47 +- tools/bpf/resolve_btfids/Makefile | 2 tools/lib/bpf/bpf_core_read.h | 6 tools/lib/bpf/libbpf.c | 5 tools/lib/bpf/linker.c | 4 tools/lib/bpf/nlattr.c | 15 tools/perf/Makefile.config | 2 tools/perf/builtin-record.c | 2 tools/perf/builtin-trace.c | 5 tools/perf/scripts/python/exported-sql-viewer.py | 5 tools/perf/tests/switch-tracking.c | 2 tools/perf/ui/browsers/hists.c | 2 tools/perf/util/intel-pt.c | 205 ++++++++- tools/testing/selftests/bpf/prog_tests/bpf_nf.c | 6 tools/testing/selftests/seccomp/seccomp_bpf.c | 7 338 files changed, 3244 insertions(+), 1524 deletions(-)
Aaron Kling (1):
arm64: tegra: Drop remaining serial clock-names and reset-names
Adam Ford (5):
arm64: dts: imx8mm-beacon: Fix RTC capacitive load
arm64: dts: imx8mn-beacon: Fix RTC capacitive load
arm64: dts: imx8mp-beacon: Fix RTC capacitive load
arm64: dts: imx8mm-beacon: Set SAI5 MCLK direction to output for HDMI audio
arm64: dts: imx8mn-beacon: Set SAI5 MCLK direction to output for HDMI audio
Adrian Hunter (2):
perf intel-pt: Fix PEBS-via-PT data_src
perf scripts python: exported-sql-viewer.py: Fix pattern matching with Python 3
Ahmed S. Darwish (2):
tools/x86/kcpuid: Fix error handling
x86/cpu: Sanitize CPUID(0x80000000) output
Al Viro (3):
path_overmount(): avoid false negatives
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2) do_change_type(): refuse to operate on unmounted/not ours mounts
Alexander Shiyan (1):
power: reset: at91-reset: Optimize at91_reset()
Alexander Sverdlin (1):
counter: interrupt-cnt: Protect enable/disable OPs with mutex
Alexandre Mergnat (2):
rtc: Make rtc_time64_to_tm() support dates before 1970
rtc: Fix offset calculation for .start_secs < 0
Alexei Safin (1):
hwmon: (asus-ec-sensors) check sensor index in read_string()
Alexey Gladkov (1):
mfd: stmpe-spi: Correct the name used in MODULE_DEVICE_TABLE
Alexey Kodanev (1):
wifi: rtw88: fix the 'para' buffer size to avoid reading out of bounds
Alexey Minnekhanov (3):
arm64: dts: qcom: sdm660-xiaomi-lavender: Add missing SD card detect GPIO
arm64: dts: qcom: sdm660-lavender: Add missing USB phy supply
arm64: dts: qcom: sda660-ifc6560: Fix dt-validate warning
Alexis Lothoré (1):
net: stmmac: make sure that ptp_rate is not 0 before configuring timestamping
Alok Tiwari (3):
gve: Fix RX_BUFFERS_POSTED stat to report per-queue fill_cnt
gve: add missing NULL check for gve_alloc_pending_packet() in TX DQO
scsi: iscsi: Fix incorrect error path labels for flashnode operations
Amir Tzin (1):
net/mlx5: Fix ECVF vports unload on shutdown flow
Amit Sunil Dhamne (1):
usb: typec: tcpm/tcpci_maxim: Fix bounds check in process_rx()
Anand Moon (1):
perf/amlogic: Replace smp_processor_id() with raw_smp_processor_id() in meson_ddr_pmu_create()
Andre Przywara (1):
dt-bindings: vendor-prefixes: Add Liontron name
Andreas Gruenbacher (1):
gfs2: gfs2_create_inode error handling fix
Andrew Cooper (1):
x86/idle: Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR in mwait_idle_with_hints() and prefer_mwait_c1_over_halt()
Andrey Konovalov (1):
kasan: use unchecked __memset internally
Andrey Vatoropin (1):
fs/ntfs3: handle hdr_first_de() return value
Andy Shevchenko (1):
pinctrl: at91: Fix possible out-of-boundary access
AngeloGioacchino Del Regno (4):
drm/mediatek: mtk_drm_drv: Fix kobject put for mtk_mutex device ptr drm/mediatek: Fix kobject put for component sub-drivers drm/mediatek: mtk_drm_drv: Unbind secondary mmsys components on err
arm64: dts: mediatek: mt8195: Reparent vdec1/2 and venc1 power domains
Annie Li (1):
x86/microcode/AMD: Do not return error when microcode update is not necessary
Anton Protopopov (3):
libbpf: Use proper errno value in linker
bpf: Fix uninitialized values in BPF_{CORE,PROBE}_READ
libbpf: Use proper errno value in nlattr
Anubhav Shelat (1):
perf trace: Always print return value for syscalls returning a pid
Armin Wolf (1):
ACPI: OSI: Stop advertising support for "3.0 _SCP Extensions"
Arnaldo Carvalho de Melo (2):
perf build: Warn when libdebuginfod devel files are not available perf ui browser hists: Set actions->thread before calling do_zoom_thread()
Aurabindo Pillai (1):
Revert "drm/amd/display: more liberal vmin/vmax update for freesync"
Baochen Qiang (3):
wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
wifi: ath11k: don't use static variables in ath11k_debugfs_fw_stats_process()
wifi: ath11k: don't wait when there is no vdev started
Bartosz Golaszewski (1):
Bluetooth: hci_qca: move the SoC type check to the right place
Beleswar Padhi (1):
arm64: dts: ti: k3-j721e-sk: Add support for multiple CAN instances
Benjamin Marzinski (4):
dm: don't change md if dm_table_set_restrictions() fails
dm: free table mempools if not used in __bind
dm-flakey: error all IOs when num_features is absent
dm-flakey: make corrupting read bios work
Biju Das (2):
drm: rcar-du: Fix memory leak in rcar_du_vsps_init() drm/tegra: rgb: Fix the unbound reference count
Bjorn Helgaas (1):
PCI/DPC: Initialize aer_err_info before using it
Brian Pellegrino (1):
iio: filter: admv8818: Support frequencies >= 2^32
Caleb Connolly (1):
ath10k: snoc: fix unbalanced IRQ enable in crash recovery
Carlos Fernandez (1):
macsec: MACsec SCI assignment for ES = 0
Cezary Rojewski (3):
ASoC: codecs: hda: Fix RPM usage count underflow
ASoC: Intel: avs: Fix deadlock when the failing IPC is SET_D0IX
ASoC: Intel: avs: Verify content returned by parse_int_array()
Chao Yu (3):
f2fs: fix to do sanity check on sbi->total_valid_block_count
f2fs: clean up w/ fscrypt_is_bounce_page()
f2fs: fix to detect gcing page in f2fs_is_cp_guaranteed()
Charalampos Mitrodimas (1):
net: tipc: fix refcount warning in tipc_aead_encrypt
Charles Han (1):
drm/amd/pp: Fix potential NULL pointer dereference in atomctrl_initialize_mc_reg_table
Charles Yeh (1):
USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
Chenyuan Yang (1):
phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug
Christophe JAILLET (2):
drm/bridge: lt9611uxc: Fix an error handling path in lt9611uxc_probe()
mfd: exynos-lpass: Avoid calling exynos_lpass_disable() twice in exynos_lpass_remove()
Claudiu Beznea (3):
serial: sh-sci: Check if TX data was written to device in .tx_empty()
serial: sh-sci: Move runtime PM enable to sci_probe_single()
serial: sh-sci: Clean sci_ports[0] after at earlycon exit
Corentin Labbe (1):
crypto: sun8i-ss - do not use sg_dma_len before calling DMA functions
Cosmin Ratiu (1):
xfrm: Use xdo.dev instead of xdo.real_dev
Dan Carpenter (5):
remoteproc: qcom_wcnss_iris: Add missing put_device() on error in probe
rpmsg: qcom_smd: Fix uninitialized return variable in __qcom_smd_send() net/mlx4_en: Prevent potential integer overflow calculating Hz
pmdomain: core: Fix error checking in genpd_dev_pm_attach_by_id()
regulator: max20086: Fix refcount leak in max20086_parse_regulators_dt()
Daniel Wagner (1):
nvmet-fcloop: access fcpreq only when holding reqlock
Daniil Tatianin (1):
ACPICA: exserial: don't forget to handle FFixedHW opregions for reading
Dapeng Mi (1):
perf record: Fix incorrect --user-regs comments
Dave Penkler (2):
usb: usbtmc: Fix timeout value in get_stb
usb: usbtmc: Fix read_stb function and get_stb ioctl
David Heimann (1):
ALSA: usb-audio: Add implicit feedback quirk for RODE AI-1
Dmitry Antipov (2):
wifi: rtw88: do not ignore hardware read error during DPK
Bluetooth: MGMT: iterate over mesh commands in mgmt_mesh_foreach()
Dmitry Baryshkov (2):
ARM: dts: qcom: apq8064: add missing clocks to the timer node
ARM: dts: qcom: apq8064 merge hw splinlock into corresponding syscon device
Dmitry Torokhov (1):
Input: synaptics-rmi - fix crash with unsupported versions of F34
Dr. David Alan Gilbert (1):
Bluetooth: MGMT: Remove unused mgmt_pending_find_data
Dustin Lundquist (1):
serial: jsm: fix NPE during jsm_uart_port_init
Dzmitry Sankouski (4):
arm64: dts: qcom: sdm845-starqltechn: remove wifi
arm64: dts: qcom: sdm845-starqltechn: fix usb regulator mistake
arm64: dts: qcom: sdm845-starqltechn: refactor node order
arm64: dts: qcom: sdm845-starqltechn: remove excess reserved gpios
Easwar Hariharan (1):
wifi: ath11k: convert timeouts to secs_to_jiffies()
Eddie James (1):
powerpc/crash: Fix non-smp kexec preparation
Eric Dumazet (6):
net_sched: sch_sfq: fix a potential crash on gso_skb handling
net_sched: prio: fix a race in prio_tune()
net_sched: red: fix a race in __red_change()
net_sched: tbf: fix a race in tbf_change()
net_sched: ets: fix a race in ets_qdisc_change()
calipso: unlock rcu before returning -EAFNOSUPPORT
Faicker Mo (1):
net: openvswitch: Fix the dead loop of MPLS parse
Fernando Fernandez Mancera (1):
netfilter: nft_tunnel: fix geneve_opt dump
Finn Thain (1):
m68k: mac: Fix macintosh_config for Mac II
Florian Westphal (3):
netfilter: nf_tables: nft_fib_ipv6: fix VRF ipv4/ipv6 result discrepancy
netfilter: nf_set_pipapo_avx2: fix initial map fill
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
Gabor Juhos (2):
pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31
pinctrl: armada-37xx: set GPIO output value before setting direction
Gautham R. Shenoy (1):
acpi-cpufreq: Fix nominal_freq units to KHz in get_max_boost_ratio()
Geert Uytterhoeven (1):
spi: sh-msiof: Fix maximum DMA transfer size
Greg Kroah-Hartman (3):
net: phy: fix up const issues in to_mdio_device() and to_phy_device() Revert "io_uring: ensure deferred completions are posted for multishot" Linux 6.6.94
Hangbin Liu (1):
bonding: assign random address if device address is same as bond
Hans Zhang (2):
efi/libstub: Describe missing 'out' parameter in efi_load_initrd
PCI: cadence: Fix runtime atomic count underflow
Haren Myneni (1):
powerpc/vas: Return -EINVAL if the offset is non-zero in mmap()
Hari Kalavakunta (1):
net: ncsi: Fix GCPS 64-bit member variables
Hariprasad Kelam (1):
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
Hector Martin (2):
ASoC: tas2764: Enable main IRQs
PCI: apple: Use gpiod_set_value_cansleep in probe flow
Henry Martin (6):
clk: bcm: rpi: Add NULL check in raspberrypi_clk_register()
wifi: mt76: mt7915: Fix null-ptr-deref in mt7915_mmio_wed_init()
soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop()
backlight: pm8941: Add NULL check in wled_configure()
dmaengine: ti: Add NULL check in udma_probe()
serial: Fix potential null-ptr-deref in mlb_usio_probe()
Herbert Xu (4):
crypto: marvell/cesa - Handle zero-length skcipher requests
crypto: marvell/cesa - Avoid empty transfer descriptor
crypto: lrw - Only add ecb if it is not already there
crypto: xts - Only add ecb if it is not already there
Hongyu Xie (1):
usb: storage: Ignore UAS driver for SanDisk 3.2 Gen2 storage device
Horatiu Vultur (4):
net: lan966x: Fix 1-step timestamping over ipv4 or ipv6
net: phy: mscc: Fix memory leak when using one step timestamping
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: lan966x: Make sure to insert the vlan tags also in host mode
Huajian Yang (1):
netfilter: bridge: Move specific fragmented packet to slow_path instead of dropping it
Huang Yiwei (1):
firmware: SDEI: Allow sdei initialization without ACPI_APEI_GHES
I Hsin Cheng (1):
drm/meson: Use 1000ULL when operating with mode->clock
Ian Forbes (1):
drm/vmwgfx: Add seqno waiter for sync_files
Ido Schimmel (1):
seg6: Fix validation of nexthop addresses
Ilya Leoshkevich (1):
s390/bpf: Store backchain even for leaf progs
Ioana Ciornei (1):
bus: fsl-mc: fix double-free on mc_dev
Jack Morgenstein (1):
RDMA/cma: Fix hang when cma_netevent_callback fails to queue_work
Jacob Moroni (1):
IB/cm: use rwlock for MAD agent lock
Jakub Raczynski (2):
net/mdiobus: Fix potential out-of-bounds read/write access net/mdiobus: Fix potential out-of-bounds clause 45 read/write access
Jason Gunthorpe (1):
iommu: Protect against overflow in iommu_pgsize()
Jeff Johnson (1):
wifi: ath11k: fix soc_dp_stats debugfs file permission
Jens Axboe (3):
io_uring: add io_file_can_poll() helper
io_uring/rw: allow pollable non-blocking attempts for !FMODE_NOWAIT io_uring/rw: fix wrong NOWAIT check in io_rw_init_file()
Jeongjun Park (1):
ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()
Jianbo Liu (1):
net/mlx5e: Fix leak of Geneve TLV option object
Jiaqing Zhao (1):
x86/mtrr: Check if fixed-range MTRRs exist in mtrr_save_fixed_ranges()
Jiayi Li (1):
usb: quirks: Add NO_LPM quirk for SanDisk Extreme 55AE
Jiayuan Chen (5):
bpf: fix ktls panic with sockmap
bpf, sockmap: fix duplicated data transmission bpf, sockmap: Fix panic when calling skb_linearize ktls, sockmap: Fix missing uncharge operation bpf, sockmap: Avoid using sk_socket after free when sending
Jinjian Song (1):
net: wwan: t7xx: Fix napi rx poll issue
Jiri Slaby (SUSE) (1):
powerpc: do not build ppc_save_regs.o always
Joel Stanley (1):
ARM: aspeed: Don't select SRAM
Jonas Gorski (2):
net: dsa: b53: do not enable RGMII delay on bcm63xx
net: dsa: b53: allow RGMII for bcm63xx RGMII ports
Jonas Karlman (1):
media: rkvdec: Fix frame size enumeration
Jonathan Wiepert (1):
Use thread-safe function pointer in libbpf_print
Judith Mendez (2):
arm64: dts: ti: k3-am65-main: Fix sdhci node properties
arm64: dts: ti: k3-am65-main: Add missing taps to sdhci0
Julien Massot (2):
arm64: dts: mt6359: Add missing 'compatible' property to regulators node
arm64: dts: mt6359: Rename RTC node to match binding expectations
Junxian Huang (1):
RDMA/hns: Include hnae3.h in hns_roce_hw_v2.h
KaFai Wan (1):
bpf: Avoid __bpf_prog_ret0_warn when jit fails
Kees Cook (6):
ASoC: SOF: ipc4-pcm: Adjust pipeline_list->pipelines allocation type
watchdog: exar: Shorten identity name to fit correctly drm/vkms: Adjust vkms_state->active_planes allocation type
scsi: qedf: Use designated initializer for struct qed_fcoe_cb_ops
randstruct: gcc-plugin: Remove bogus void member
randstruct: gcc-plugin: Fix attribute addition
Kornel Dulęba (1):
arm64: Support ARM64_VA_BITS=52 when setting ARCH_MMAP_RND_BITS_MAX
Kuniyuki Iwashima (1):
calipso: Don't call calipso functions for AF_INET sk.
Lad Prabhakar (1):
usb: renesas_usbhs: Reorder clock handling and power management in probe
Leo Yan (1):
perf tests switch-tracking: Fix timestamp comparison
Li Lingfeng (2):
nfs: clear SB_RDONLY before getting superblock
nfs: ignore SB_RDONLY when remounting nfs
Li RongQing (1):
vfio/type1: Fix error unwind in migration dirty bitmap allocation
Liu Dalin (1):
rtc: loongson: Add missing alarm notifications for ACPI RTC events
Longfang Liu (3):
hisi_acc_vfio_pci: fix XQE dma address error
hisi_acc_vfio_pci: add eq and aeq interruption restore
hisi_acc_vfio_pci: bugfix live migration function without VF device driver
Lorenzo Bianconi (1):
bpf: Allow XDP dev-bound programs to perform XDP_REDIRECT into maps
Luca Weiss (5):
clk: qcom: camcc-sm6350: Add *_wait_val values for GDSCs
clk: qcom: dispcc-sm6350: Add *_wait_val values for GDSCs
clk: qcom: gcc-sm6350: Add *_wait_val values for GDSCs
clk: qcom: gpucc-sm6350: Add *_wait_val values for GDSCs
arm64: dts: qcom: sm8350: Reenable crypto & cryptobam
Luiz Augusto von Dentz (6):
Bluetooth: L2CAP: Fix not responding with L2CAP_CR_LE_ENCRYPTION
Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete
Bluetooth: MGMT: Protect mgmt_pending list with its own lock
Bluetooth: Fix NULL pointer deference on eir_get_service_data
Bluetooth: hci_sync: Fix broadcast/PA when using an existing instance
Bluetooth: MGMT: Fix sparse errors
Lukasz Czechowski (1):
dt-bindings: usb: cypress,hx3: Add support for all variants
Maharaja Kennadyrajan (1):
wifi: ath12k: fix node corruption in ar->arvifs list
Mario Limonciello (1):
thunderbolt: Fix a logic error in wake on connect
Mark Brown (1):
arm64/fpsimd: Discard stale CPU state when handling SME traps
Mark Rutland (3):
arm64/fpsimd: Avoid RES0 bits in the SME trap handler arm64/fpsimd: Fix merging of FPSIMD state during signal return arm64/fpsimd: Do not discard modified SVE state
Martin Blumenstingl (4):
drm/meson: use unsigned long long / Hz for frequency types drm/meson: fix debug log statement when setting the HDMI clocks drm/meson: use vclk_freq instead of pixel_freq in debug print drm/meson: fix more rounding issues with 59.94Hz modes
Martin Povišer (1):
ASoC: apple: mca: Constrain channels according to TDM mask
Mathias Nyman (1):
usb: Flush altsetting 0 endpoints before reinitializating them after reset.
Matthew Wilcox (Oracle) (2):
bio: Fix bio_first_folio() for SPARSEMEM without VMEMMAP
block: Fix bvec_set_folio() for very large folios
Maxime Ripard (1):
drm/vc4: tests: Use return instead of assert
Miaoqian Lin (2):
firmware: psci: Fix refcount leak in psci_dt_init
tracing: Fix error handling in event_trigger_parse()
Michal Koutný (1):
kernfs: Relax constraint in draining guard
Michal Kubiak (3):
ice: fix Tx scheduler error handling in XDP callback
ice: create new Tx scheduler nodes for new queues only
ice: fix rebuilding the Tx scheduler tree for large queue counts
Michal Luczaj (1):
net: Fix TOCTOU issue in sk_is_readable()
Mikhail Arkhipov (1):
mtd: nand: ecc-mxic: Fix use of uninitialized variable ret
Mirco Barone (1):
wireguard: device: enable threaded NAPI
Moshe Shemesh (1):
net/mlx5: Ensure fw pages are always allocated on same NUMA
Murad Masimov (1):
ocfs2: fix possible memory leak in ocfs2_finish_quota_recovery
Namhyung Kim (1):
perf trace: Fix leaks of 'struct thread' in set_filter_loop_pids()
Nathan Chancellor (1):
kbuild: Disable -Wdefault-const-init-unsafe
Neill Kapron (1):
selftests/seccomp: fix syscall_restart test for arm compat
Nicolas Pitre (1):
vt: remove VT_RESIZE and VT_RESIZEX from vt_compat_ioctl()
Nikita Zhandarovich (1):
net: usb: aqc111: fix error handling of usbnet read calls
Nitin Rawat (1):
scsi: ufs: qcom: Prevent calling phy_exit() before phy_init()
Nícolas F. R. A. Prado (2):
arm64: dts: mediatek: mt6357: Drop regulator-fixed compatibles
regulator: dt-bindings: mt6357: Drop fixed compatible requirement
Oleg Nesterov (1):
posix-cpu-timers: fix race between handle_posix_cpu_timers() and posix_cpu_timer_del()
Oliver Neukum (1):
net: usb: aqc111: debug info before sanitation
Ovidiu Panait (3):
crypto: sun8i-ce-hash - fix error handling in sun8i_ce_hash_run()
crypto: sun8i-ce-cipher - fix error handling in sun8i_ce_cipher_prepare()
crypto: sun8i-ce - move fallback ahash_request to the end of the struct
P Praneesh (1):
wifi: ath12k: Add MSDU length validation for TKIP MIC error
Pali Rohár (1):
cifs: Fix validation of SMB1 query reparse point response
Pan Taixi (1):
tracing: Fix compilation warning on arm32
Patrisious Haddad (2):
RDMA/mlx5: Fix error flow upon firmware failure for RQ destruction net/mlx5: Fix return value when searching for existing flow group
Pauli Virtanen (1):
Bluetooth: hci_core: fix list_for_each_entry_rcu usage
Pawel Laszczak (2):
usb: cdnsp: Fix issue with detecting command completion event
usb: cdnsp: Fix issue with detecting USB 3.2 speed
Peter Chiu (1):
wifi: mt76: mt7996: set EHT max ampdu length capability
Peter Robinson (1):
arm64: dts: rockchip: Update eMMC for NanoPi R5 series
Peter Zijlstra (1):
perf: Ensure bpf_perf_link path is properly serialized
Phillip Lougher (1):
Squashfs: check return result of sb_min_blocksize
Prasanth Babu Mantena (1):
arm64: dts: ti: k3-j721e-common-proc-board: Enable OSPI1 on J721E
Qasim Ijaz (2):
usb: typec: ucsi: fix Clang -Wsign-conversion warning
fpga: fix potential null pointer deref in fpga_mgr_test_img_load_sgt()
Qing Wang (1):
perf/core: Fix broken throttling when max_samples_per_tick=1
Qiuxu Zhuo (2):
EDAC/skx_common: Fix general protection fault EDAC/{skx_common,i10nm}: Fix the loss of saved RRL for HBM pseudo channel 0
Qu Wenruo (2):
btrfs: scrub: update device stats when an error is detected
btrfs: scrub: fix a wrong error type when metadata bytenr mismatches
Quentin Schulz (2):
arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou
net: stmmac: platform: guarantee uniqueness of bus_id
Radim Krčmář (1):
RISC-V: KVM: lock the correct mp_state during reset
Rafael J. Wysocki (2):
PM: sleep: Print PM debug messages during hibernation
PM: sleep: Fix power.is_suspended cleanup for direct-complete devices
Rajat Soni (1):
wifi: ath12k: fix memory leak in ath12k_service_ready_ext_event
Ramya Gnanasekar (1):
wifi: ath12k: Fix WMI tag for EHT rate in peer assoc
Ritesh Harjani (IBM) (1):
powerpc/powernv/memtrace: Fix out of bounds issue in memtrace mmap
Robert Malz (2):
i40e: return false from i40e_reset_vf if reset is in progress
i40e: retry VFLR handling if there is ongoing VF reset
Rodrigo Gobbi (1):
wifi: ath11k: validate ath11k_crypto_mode on top of ath11k_core_qmi_firmware_ready
Roger Pau Monne (1):
xen/x86: fix initial memory balloon target
Rolf Eike Beer (1):
iommu: remove duplicate selection of DMAR_TABLE
Ronak Doshi (1):
vmxnet3: correctly report gso type for UDP tunnels
Ryusuke Konishi (1):
nilfs2: do not propagate ENOENT error from nilfs_btree_propagate()
Saket Kumar Bhaskar (1):
selftests/bpf: Fix bpf_nf selftest failure
Sam Winchenbach (3):
iio: filter: admv8818: fix band 4, state 15
iio: filter: admv8818: fix integer overflow
iio: filter: admv8818: fix range calculation
Sanjeev Yadav (1):
scsi: core: ufs: Fix a hang in the error handler
Sergey Senozhatsky (1):
thunderbolt: Do not double dequeue a configuration request
Sergey Shtylyov (1):
fbdev: core: fbcvt: avoid division by 0 in fb_cvt_hperiod()
Shayne Chen (1):
wifi: mt76: mt7996: fix RX buffer size of MCU event
Shiming Cheng (1):
net: fix udp gso skb_segment after pull from frag_list
Siddharth Vadapalli (1):
remoteproc: k3-r5: Drop check performed in k3_r5_rproc_{mbox_callback/kick}Stefano Stabellini (1):
xen/arm: call uaccess_ttbr0_enable for dm_op hypercall
Stephan Gerhold (1):
arm64: dts: qcom: sc8280xp-x13s: Drop duplicate DMIC supplies
Steven Rostedt (2):
tracing: Move histogram trigger variables from stack to per CPU structure
tracing: Rename event_trigger_alloc() to trigger_data_alloc()
Stone Zhang (1):
wifi: ath11k: fix node corruption in ar->arvifs list
Su Hui (1):
soc: aspeed: lpc: Fix impossible judgment condition
Suleiman Souhlal (1):
tools/resolve_btfids: Fix build when cross compiling kernel with clang.
Tao Chen (2):
libbpf: Remove sample_period init in perf_buffer
bpf: Fix WARN() in get_bpf_raw_tp_regs
Terry Junge (1):
HID: usbhid: Eliminate recurrent out-of-bounds bug in usbhid_parse()
Thangaraj Samynathan (1):
net: lan743x: rename lan743x_reset_phy to lan743x_hw_reset_phy
Thomas Gleixner (1):
x86/iopl: Cure TIF_IO_BITMAP inconsistencies
Thuan Nguyen (1):
arm64: dts: renesas: white-hawk-ard-audio: Fix TPU0 groups
Toke Høiland-Jørgensen (1):
wifi: ath9k_htc: Abort software beacon handling if disabled
Tzung-Bi Shih (1):
kunit: Fix wrong parameter to kunit_deactivate_static_stub()
Uwe Kleine-König (1):
iio: adc: ad7124: Fix 3dB filter frequency reading
Vaishnav Achath (1):
arm64: dts: ti: k3-j721e-sk: Model CSI2RX connector mux
Vignesh Raman (1):
arm64: defconfig: mediatek: enable PHY drivers
Viktor Malik (1):
libbpf: Fix buffer overflow in bpf_object__init_prog
Vincent Knecht (1):
clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz
Vishwaroop A (3):
spi: tegra210-quad: Fix X1_X2_X4 encoding and support x4 transfers
spi: tegra210-quad: remove redundant error handling code
spi: tegra210-quad: modify chip select (CS) deactivation
WangYuli (1):
MIPS: Loongson64: Add missing '#interrupt-cells' for loongson64c_ls7a
Wei Fang (1):
net: phy: clear phydev->devlink when the link is deleted
Wentao Liang (1):
nilfs2: add pointer check for nilfs_direct_propagate()
Wilfred Mallawa (1):
PCI: Print the actual delay time in pci_bridge_wait_for_secondary_bus()
Wojciech Slenska (1):
pinctrl: qcom: pinctrl-qcm2290: Add missing pins
Wolfram Sang (3):
ARM: dts: at91: usb_a9263: fix GPIO for Dataflash chip select
ARM: dts: at91: at91sam9263: fix NAND chip selects
rtc: sh: assign correct interrupts with DT
Wupeng Ma (1):
VMCI: fix race between vmci_host_setup_notify and vmci_ctx_unset_notify
Xilin Wu (1):
arm64: dts: qcom: sm8250: Fix CPU7 opp table
Xu Yang (1):
dt-bindings: phy: imx8mq-usb: fix fsl,phy-tx-vboost-level-microvolt property
Yanqing Wang (1):
driver: net: ethernet: mtk_star_emac: fix suspend/resume issue
Yemike Abhilash Chandra (1):
arm64: dts: ti: k3-j721e-sk: Add DT nodes for power regulators
Yeoreum Yun (1):
coresight: prevent deactivate active config while enabling the config
Yihang Li (1):
scsi: hisi_sas: Call I_T_nexus after soft reset for SATA disk
Yongliang Gao (1):
rcu/cpu_stall_cputime: fix the hardirq count for x86 architecture
Yunhui Cui (1):
ACPI: CPPC: Fix NULL pointer dereference when nosmp is used
Yuuki NAGAO (1):
ASoC: ti: omap-hdmi: Re-add dai_link->platform to fix card init
Zhen XIN (2):
wifi: rtw88: sdio: map mgmt frames to queue TX_DESC_QSEL_MGMT
wifi: rtw88: sdio: call rtw_sdio_indicate_tx_status unconditionally
Zhiguo Niu (2):
f2fs: use d_inode(dentry) cleanup dentry->d_inode
f2fs: fix to correct check conditions in f2fs_cross_rename
Zhongqiu Duan (1):
netfilter: nft_quota: match correctly when the quota just depleted
Zijun Hu (2):
PM: wakeup: Delete space in the end of string shown by pm_show_wakelocks() fs/filesystems: Fix potential unsigned integer underflow in fs_name()
ping.gao (1):
scsi: ufs: mcq: Delete ufshcd_release_scsi_cmd() in ufshcd_mcq_abort()
Álvaro Fernández Rojas (3):
spi: bcm63xx-spi: fix shared reset
spi: bcm63xx-hsspi: fix shared reset
net: dsa: tag_brcm: legacy: fix pskb_may_pull length
Greg Kroah-Hartman
maintainerDocumentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml +1 -2
@@ -58,8 +58,7 @@ properties: fsl,phy-tx-vboost-level-microvolt: description: Adjust the boosted transmit launch pk-pk differential amplitude - minimum: 880 - maximum: 1120 + enum: [844, 1008, 1156] fsl,phy-comp-dis-tune-percent: description:
Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml +1 -11
@@ -33,7 +33,7 @@ patternProperties: "^ldo-v(camio18|aud28|aux18|io18|io28|rf12|rf18|cn18|cn28|fe28)$": type: object - $ref: fixed-regulator.yaml# + $ref: regulator.yaml# unevaluatedProperties: false description: Properties for single fixed LDO regulator.
@@ -112,7 +112,6 @@ examples: regulator-enable-ramp-delay = <220>; }; mt6357_vfe28_reg: ldo-vfe28 { - compatible = "regulator-fixed"; regulator-name = "vfe28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>;
@@ -125,14 +124,12 @@ examples: regulator-enable-ramp-delay = <110>; }; mt6357_vrf18_reg: ldo-vrf18 { - compatible = "regulator-fixed"; regulator-name = "vrf18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-enable-ramp-delay = <110>; }; mt6357_vrf12_reg: ldo-vrf12 { - compatible = "regulator-fixed"; regulator-name = "vrf12"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>;
@@ -157,14 +154,12 @@ examples: regulator-enable-ramp-delay = <264>; }; mt6357_vcn28_reg: ldo-vcn28 { - compatible = "regulator-fixed"; regulator-name = "vcn28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-enable-ramp-delay = <264>; }; mt6357_vcn18_reg: ldo-vcn18 { - compatible = "regulator-fixed"; regulator-name = "vcn18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>;
@@ -183,7 +178,6 @@ examples: regulator-enable-ramp-delay = <264>; }; mt6357_vcamio_reg: ldo-vcamio18 { - compatible = "regulator-fixed"; regulator-name = "vcamio"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>;
@@ -212,28 +206,24 @@ examples: regulator-always-on; }; mt6357_vaux18_reg: ldo-vaux18 { - compatible = "regulator-fixed"; regulator-name = "vaux18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-enable-ramp-delay = <264>; }; mt6357_vaud28_reg: ldo-vaud28 { - compatible = "regulator-fixed"; regulator-name = "vaud28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-enable-ramp-delay = <264>; }; mt6357_vio28_reg: ldo-vio28 { - compatible = "regulator-fixed"; regulator-name = "vio28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-enable-ramp-delay = <264>; }; mt6357_vio18_reg: ldo-vio18 { - compatible = "regulator-fixed"; regulator-name = "vio18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>;
Documentation/devicetree/bindings/usb/cypress,hx3.yaml +16 -3
@@ -14,9 +14,22 @@ allOf: properties: compatible: - enum: - - usb4b4,6504 - - usb4b4,6506 + oneOf: + - enum: + - usb4b4,6504 + - usb4b4,6506 + - items: + - enum: + - usb4b4,6500 + - usb4b4,6508 + - const: usb4b4,6504 + - items: + - enum: + - usb4b4,6502 + - usb4b4,6503 + - usb4b4,6507 + - usb4b4,650a + - const: usb4b4,6506 reg: true
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -773,6 +773,8 @@ patternProperties: description: Linux-specific binding "^linx,.*": description: Linx Technologies + "^liontron,.*": + description: Shenzhen Liontron Technology Co., Ltd "^liteon,.*": description: LITE-ON Technology Corp. "^litex,.*":
Makefile +1 -1
@@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 6 PATCHLEVEL = 6 -SUBLEVEL = 93 +SUBLEVEL = 94 EXTRAVERSION = NAME = Pinguïn Aangedreven
arch/arm/boot/dts/microchip/at91sam9263ek.dts +1 -1
@@ -152,7 +152,7 @@ nand_controller: nand-controller { nand@3 { reg = <0x3 0x0 0x800000>; rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; nand-bus-width = <8>; nand-ecc-mode = "soft"; nand-on-flash-bbt;
arch/arm/boot/dts/microchip/tny_a9263.dts +1 -1
@@ -64,7 +64,7 @@ nand_controller: nand-controller { nand@3 { reg = <0x3 0x0 0x800000>; rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; nand-bus-width = <8>; nand-ecc-mode = "soft"; nand-on-flash-bbt;
arch/arm/boot/dts/microchip/usb_a9263.dts +2 -2
@@ -58,7 +58,7 @@ usb1: gadget@fff78000 { }; spi0: spi@fffa4000 { - cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioA 5 GPIO_ACTIVE_LOW>; status = "okay"; flash@0 { compatible = "atmel,at45", "atmel,dataflash";
@@ -84,7 +84,7 @@ nand_controller: nand-controller { nand@3 { reg = <0x3 0x0 0x800000>; rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; nand-bus-width = <8>; nand-ecc-mode = "soft"; nand-on-flash-bbt;
arch/arm/boot/dts/qcom/qcom-apq8064.dtsi +6 -9
@@ -213,12 +213,6 @@ sleep_clk: sleep_clk { }; }; - sfpb_mutex: hwmutex { - compatible = "qcom,sfpb-mutex"; - syscon = <&sfpb_wrapper_mutex 0x604 0x4>; - #hwlock-cells = <1>; - }; - smem { compatible = "qcom,smem"; memory-region = <&smem_region>;
@@ -322,9 +316,10 @@ tlmm_pinmux: pinctrl@800000 { pinctrl-0 = <&ps_hold>; }; - sfpb_wrapper_mutex: syscon@1200000 { - compatible = "syscon"; - reg = <0x01200000 0x8000>; + sfpb_mutex: hwmutex@1200600 { + compatible = "qcom,sfpb-mutex"; + reg = <0x01200600 0x100>; + #hwlock-cells = <1>; }; intc: interrupt-controller@2000000 {
@@ -343,6 +338,8 @@ timer@200a000 { <1 3 0x301>; reg = <0x0200a000 0x100>; clock-frequency = <27000000>; + clocks = <&sleep_clk>; + clock-names = "sleep"; cpu-offset = <0x80000>; };
arch/arm/mach-aspeed/Kconfig +0 -1
@@ -2,7 +2,6 @@ menuconfig ARCH_ASPEED bool "Aspeed BMC architectures" depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V6 || ARCH_MULTI_V7 - select SRAM select WATCHDOG select ASPEED_WATCHDOG select MFD_SYSCON
arch/arm64/Kconfig +3 -3
@@ -304,9 +304,9 @@ config ARCH_MMAP_RND_BITS_MAX default 24 if ARM64_VA_BITS=39 default 27 if ARM64_VA_BITS=42 default 30 if ARM64_VA_BITS=47 - default 29 if ARM64_VA_BITS=48 && ARM64_64K_PAGES - default 31 if ARM64_VA_BITS=48 && ARM64_16K_PAGES - default 33 if ARM64_VA_BITS=48 + default 29 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52) && ARM64_64K_PAGES + default 31 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52) && ARM64_16K_PAGES + default 33 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52) default 14 if ARM64_64K_PAGES default 16 if ARM64_16K_PAGES default 18
arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts +1 -0
@@ -124,6 +124,7 @@ &sai5 { assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; assigned-clock-rates = <24576000>; #sound-dai-cells = <0>; + fsl,sai-mclk-direction-output; status = "okay"; };
arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi +1 -0
@@ -231,6 +231,7 @@ eeprom@50 { rtc: rtc@51 { compatible = "nxp,pcf85263"; reg = <0x51>; + quartz-load-femtofarads = <12500>; }; };
arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts +1 -0
@@ -126,6 +126,7 @@ &sai5 { assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; assigned-clock-rates = <24576000>; #sound-dai-cells = <0>; + fsl,sai-mclk-direction-output; status = "okay"; };
arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi +1 -0
@@ -240,6 +240,7 @@ eeprom@50 { rtc: rtc@51 { compatible = "nxp,pcf85263"; reg = <0x51>; + quartz-load-femtofarads = <12500>; }; };
arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi +1 -0
@@ -192,6 +192,7 @@ eeprom@50 { rtc: rtc@51 { compatible = "nxp,pcf85263"; reg = <0x51>; + quartz-load-femtofarads = <12500>; }; };
arch/arm64/boot/dts/mediatek/mt6357.dtsi +0 -10
@@ -60,7 +60,6 @@ mt6357_vpa_reg: buck-vpa { }; mt6357_vfe28_reg: ldo-vfe28 { - compatible = "regulator-fixed"; regulator-name = "vfe28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>;
@@ -75,7 +74,6 @@ mt6357_vxo22_reg: ldo-vxo22 { }; mt6357_vrf18_reg: ldo-vrf18 { - compatible = "regulator-fixed"; regulator-name = "vrf18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>;
@@ -83,7 +81,6 @@ mt6357_vrf18_reg: ldo-vrf18 { }; mt6357_vrf12_reg: ldo-vrf12 { - compatible = "regulator-fixed"; regulator-name = "vrf12"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>;
@@ -112,7 +109,6 @@ mt6357_vcn33_wifi_reg: ldo-vcn33-wifi { }; mt6357_vcn28_reg: ldo-vcn28 { - compatible = "regulator-fixed"; regulator-name = "vcn28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>;
@@ -120,7 +116,6 @@ mt6357_vcn28_reg: ldo-vcn28 { }; mt6357_vcn18_reg: ldo-vcn18 { - compatible = "regulator-fixed"; regulator-name = "vcn18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>;
@@ -142,7 +137,6 @@ mt6357_vcamd_reg: ldo-vcamd { }; mt6357_vcamio_reg: ldo-vcamio18 { - compatible = "regulator-fixed"; regulator-name = "vcamio"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>;
@@ -175,7 +169,6 @@ mt6357_vsram_proc_reg: ldo-vsram-proc { }; mt6357_vaux18_reg: ldo-vaux18 { - compatible = "regulator-fixed"; regulator-name = "vaux18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>;
@@ -183,7 +176,6 @@ mt6357_vaux18_reg: ldo-vaux18 { }; mt6357_vaud28_reg: ldo-vaud28 { - compatible = "regulator-fixed"; regulator-name = "vaud28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>;
@@ -191,7 +183,6 @@ mt6357_vaud28_reg: ldo-vaud28 { }; mt6357_vio28_reg: ldo-vio28 { - compatible = "regulator-fixed"; regulator-name = "vio28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>;
@@ -199,7 +190,6 @@ mt6357_vio28_reg: ldo-vio28 { }; mt6357_vio18_reg: ldo-vio18 { - compatible = "regulator-fixed"; regulator-name = "vio18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>;
arch/arm64/boot/dts/mediatek/mt6359.dtsi +3 -1
@@ -18,6 +18,8 @@ mt6359codec: mt6359codec { }; regulators { + compatible = "mediatek,mt6359-regulator"; + mt6359_vs1_buck_reg: buck_vs1 { regulator-name = "vs1"; regulator-min-microvolt = <800000>;
@@ -296,7 +298,7 @@ mt6359_vsram_others_sshub_ldo: ldo_vsram_others_sshub { }; }; - mt6359rtc: mt6359rtc { + mt6359rtc: rtc { compatible = "mediatek,mt6358-rtc"; }; };
arch/arm64/boot/dts/mediatek/mt8195.dtsi +27 -23
71 lines not on this page · raw message
arch/arm64/boot/dts/nvidia/tegra186.dtsi +0 -12
@@ -621,9 +621,7 @@ uartb: serial@3110000 { reg-shift = <2>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA186_CLK_UARTB>; - clock-names = "serial"; resets = <&bpmp TEGRA186_RESET_UARTB>; - reset-names = "serial"; status = "disabled"; };
@@ -633,9 +631,7 @@ uartd: serial@3130000 { reg-shift = <2>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA186_CLK_UARTD>; - clock-names = "serial"; resets = <&bpmp TEGRA186_RESET_UARTD>; - reset-names = "serial"; status = "disabled"; };
@@ -645,9 +641,7 @@ uarte: serial@3140000 { reg-shift = <2>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA186_CLK_UARTE>; - clock-names = "serial"; resets = <&bpmp TEGRA186_RESET_UARTE>; - reset-names = "serial"; status = "disabled"; };
@@ -657,9 +651,7 @@ uartf: serial@3150000 { reg-shift = <2>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA186_CLK_UARTF>; - clock-names = "serial"; resets = <&bpmp TEGRA186_RESET_UARTF>; - reset-names = "serial"; status = "disabled"; };
@@ -1236,9 +1228,7 @@ uartc: serial@c280000 { reg-shift = <2>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA186_CLK_UARTC>; - clock-names = "serial"; resets = <&bpmp TEGRA186_RESET_UARTC>; - reset-names = "serial"; status = "disabled"; };
@@ -1248,9 +1238,7 @@ uartg: serial@c290000 { reg-shift = <2>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA186_CLK_UARTG>; - clock-names = "serial"; resets = <&bpmp TEGRA186_RESET_UARTG>; - reset-names = "serial"; status = "disabled"; };
arch/arm64/boot/dts/nvidia/tegra194.dtsi +0 -12
@@ -766,9 +766,7 @@ uartd: serial@3130000 { reg-shift = <2>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTD>; - clock-names = "serial"; resets = <&bpmp TEGRA194_RESET_UARTD>; - reset-names = "serial"; status = "disabled"; };
@@ -778,9 +776,7 @@ uarte: serial@3140000 { reg-shift = <2>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTE>; - clock-names = "serial"; resets = <&bpmp TEGRA194_RESET_UARTE>; - reset-names = "serial"; status = "disabled"; };
@@ -790,9 +786,7 @@ uartf: serial@3150000 { reg-shift = <2>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTF>; - clock-names = "serial"; resets = <&bpmp TEGRA194_RESET_UARTF>; - reset-names = "serial"; status = "disabled"; };
@@ -817,9 +811,7 @@ uarth: serial@3170000 { reg-shift = <2>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTH>; - clock-names = "serial"; resets = <&bpmp TEGRA194_RESET_UARTH>; - reset-names = "serial"; status = "disabled"; };
@@ -1616,9 +1608,7 @@ uartc: serial@c280000 { reg-shift = <2>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTC>; - clock-names = "serial"; resets = <&bpmp TEGRA194_RESET_UARTC>; - reset-names = "serial"; status = "disabled"; };
@@ -1628,9 +1618,7 @@ uartg: serial@c290000 { reg-shift = <2>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTG>; - clock-names = "serial"; resets = <&bpmp TEGRA194_RESET_UARTG>; - reset-names = "serial"; status = "disabled"; };
arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +0 -3
@@ -985,9 +985,6 @@ &sound { "VA DMIC0", "MIC BIAS1", "VA DMIC1", "MIC BIAS1", "VA DMIC2", "MIC BIAS3", - "VA DMIC0", "VA MIC BIAS1", - "VA DMIC1", "VA MIC BIAS1", - "VA DMIC2", "VA MIC BIAS3", "TX SWR_ADC1", "ADC2_OUTPUT"; wcd-playback-dai-link {
arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts +2 -0
@@ -155,6 +155,7 @@ &blsp1_dma { * BAM DMA interconnects support is in place. */ /delete-property/ clocks; + /delete-property/ clock-names; }; &blsp1_uart2 {
@@ -167,6 +168,7 @@ &blsp2_dma { * BAM DMA interconnects support is in place. */ /delete-property/ clocks; + /delete-property/ clock-names; }; &blsp2_uart1 {
arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +3 -0
@@ -107,6 +107,7 @@ &qusb2phy0 { status = "okay"; vdd-supply = <&vreg_l1b_0p925>; + vdda-pll-supply = <&vreg_l10a_1p8>; vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; };
@@ -404,6 +405,8 @@ &sdhc_1 { &sdhc_2 { status = "okay"; + cd-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vreg_l5b_2p95>; vqmmc-supply = <&vreg_l2b_2p95>; };
arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts +4 -12
@@ -135,8 +135,6 @@ vdda_pll_cc_ebi23: vdda_sp_sensor: vdda_ufs1_core: vdda_ufs2_core: - vdda_usb1_ss_core: - vdda_usb2_ss_core: vreg_l1a_0p875: ldo1 { regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>;
@@ -157,6 +155,7 @@ vreg_l3a_1p0: ldo3 { regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vdda_usb1_ss_core: vdd_wcss_cx: vdd_wcss_mx: vdda_wcss_pll:
@@ -383,8 +382,8 @@ &ufs_mem_phy { }; &sdhc_2 { - pinctrl-names = "default"; pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>; + pinctrl-names = "default"; cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; vmmc-supply = <&vreg_l21a_2p95>; vqmmc-supply = <&vddpx_2>;
@@ -418,16 +417,9 @@ &usb_1_qmpphy { status = "okay"; }; -&wifi { - vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; - status = "okay"; -}; - &tlmm { - gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>; + gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */ + <85 4>; /* SPI (fingerprint reader) */ sdc2_clk_state: sdc2-clk-state { pins = "sdc2_clk";
arch/arm64/boot/dts/qcom/sm8250.dtsi +1 -1
@@ -601,7 +601,7 @@ cpu7_opp8: opp-1632000000 { }; cpu7_opp9: opp-1747200000 { - opp-hz = /bits/ 64 <1708800000>; + opp-hz = /bits/ 64 <1747200000>; opp-peak-kBps = <5412000 42393600>; };
arch/arm64/boot/dts/qcom/sm8350.dtsi +2 -4
@@ -1754,11 +1754,11 @@ cryptobam: dma-controller@1dc4000 { interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; qcom,ee = <0>; + qcom,num-ees = <4>; + num-channels = <16>; qcom,controlled-remotely; iommus = <&apps_smmu 0x594 0x0011>, <&apps_smmu 0x596 0x0011>; - /* FIXME: Probing BAM DMA causes some abort and system hang */ - status = "fail"; }; crypto: crypto@1dfa000 {
@@ -1770,8 +1770,6 @@ crypto: crypto@1dfa000 { <&apps_smmu 0x596 0x0011>; interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "memory"; - /* FIXME: dependency BAM DMA is disabled */ - status = "disabled"; }; ipa: ipa@1e40000 {
arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso +1 -1
@@ -108,7 +108,7 @@ sound_clk_pins: sound-clk { }; tpu0_pins: tpu0 { - groups = "tpu_to0_a"; + groups = "tpu_to0_b"; function = "tpu"; }; };
arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +0 -8
@@ -251,14 +251,6 @@ &uart2 { status = "okay"; }; -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - &vopb { status = "okay"; };
arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi +4 -1
@@ -486,9 +486,12 @@ &saradc { &sdhci { bus-width = <8>; max-frequency = <200000000>; + mmc-hs200-1_8v; non-removable; pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; status = "okay"; };
arch/arm64/boot/dts/ti/k3-am65-main.dtsi +13 -6
@@ -436,6 +436,8 @@ sdhci0: mmc@4f80000 { interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; mmc-ddr-1_8v; mmc-hs200-1_8v; + ti,clkbuf-sel = <0x7>; + ti,trm-icp = <0x8>; ti,otap-del-sel-legacy = <0x0>; ti,otap-del-sel-mmc-hs = <0x0>; ti,otap-del-sel-sd-hs = <0x0>;
@@ -446,8 +448,9 @@ sdhci0: mmc@4f80000 { ti,otap-del-sel-ddr50 = <0x5>; ti,otap-del-sel-ddr52 = <0x5>; ti,otap-del-sel-hs200 = <0x5>; - ti,otap-del-sel-hs400 = <0x0>; - ti,trm-icp = <0x8>; + ti,itap-del-sel-legacy = <0xa>; + ti,itap-del-sel-mmc-hs = <0x1>; + ti,itap-del-sel-ddr52 = <0x0>; dma-coherent; };
@@ -458,18 +461,22 @@ sdhci1: mmc@4fa0000 { clocks = <&k3_clks 48 0>, <&k3_clks 48 1>; clock-names = "clk_ahb", "clk_xin"; interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + ti,clkbuf-sel = <0x7>; + ti,trm-icp = <0x8>; ti,otap-del-sel-legacy = <0x0>; ti,otap-del-sel-mmc-hs = <0x0>; ti,otap-del-sel-sd-hs = <0x0>; - ti,otap-del-sel-sdr12 = <0x0>; - ti,otap-del-sel-sdr25 = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; ti,otap-del-sel-sdr50 = <0x8>; ti,otap-del-sel-sdr104 = <0x7>; ti,otap-del-sel-ddr50 = <0x4>; ti,otap-del-sel-ddr52 = <0x4>; ti,otap-del-sel-hs200 = <0x7>; - ti,clkbuf-sel = <0x7>; - ti,trm-icp = <0x8>; + ti,itap-del-sel-legacy = <0xa>; + ti,itap-del-sel-sd-hs = <0x1>; + ti,itap-del-sel-sdr12 = <0xa>; + ti,itap-del-sel-sdr25 = <0x1>; dma-coherent; };
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +1 -0
@@ -557,6 +557,7 @@ &usb1 { &ospi1 { pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; + status = "okay"; flash@0 { compatible = "jedec,spi-nor";
arch/arm64/boot/dts/ti/k3-j721e-sk.dts +164 -2
220 lines not on this page · raw message
arch/arm64/configs/defconfig +3 -0
@@ -1412,6 +1412,9 @@ CONFIG_PHY_HISTB_COMBPHY=y CONFIG_PHY_HISI_INNO_USB2=y CONFIG_PHY_MVEBU_CP110_COMPHY=y CONFIG_PHY_MTK_TPHY=y +CONFIG_PHY_MTK_HDMI=m +CONFIG_PHY_MTK_MIPI_DSI=m +CONFIG_PHY_MTK_DP=m CONFIG_PHY_QCOM_EDP=m CONFIG_PHY_QCOM_EUSB2_REPEATER=m CONFIG_PHY_QCOM_PCIE2=m
arch/arm64/include/asm/esr.h +8 -6
@@ -366,12 +366,14 @@/* * ISS values for SME traps */ - -#define ESR_ELx_SME_ISS_SME_DISABLED 0 -#define ESR_ELx_SME_ISS_ILL 1 -#define ESR_ELx_SME_ISS_SM_DISABLED 2 -#define ESR_ELx_SME_ISS_ZA_DISABLED 3 -#define ESR_ELx_SME_ISS_ZT_DISABLED 4 +#define ESR_ELx_SME_ISS_SMTC_MASK GENMASK(2, 0) +#define ESR_ELx_SME_ISS_SMTC (esr) ((esr) & ESR_ELx_SME_ISS_SMTC_MASK) + +#define ESR_ELx_SME_ISS_SMTC_SME_DISABLED 0 +#define ESR_ELx_SME_ISS_SMTC_ILL 1 +#define ESR_ELx_SME_ISS_SMTC_SM_DISABLED 2 +#define ESR_ELx_SME_ISS_SMTC_ZA_DISABLED 3 +#define ESR_ELx_SME_ISS_SMTC_ZT_DISABLED 4/* ISS field definitions for MOPS exceptions */ #define ESR_ELx_MOPS_ISS_MEM_INST (UL(1) << 24)
arch/arm64/include/asm/fpsimd.h +3 -0
@@ -6,6 +6,7 @@#define __ASM_FP_H#include <asm/errno.h> +#include <asm/percpu.h> #include <asm/ptrace.h> #include <asm/processor.h> #include <asm/sigcontext.h>
@@ -69,6 +70,8 @@ struct cpu_fp_state {enum fp_type to_save; }; +DECLARE_PER_CPU(struct cpu_fp_state, fpsimd_last_state); +extern void fpsimd_bind_state_to_cpu (struct cpu_fp_state *fp_state);extern void fpsimd_flush_task_state (struct task_struct *target);
arch/arm64/kernel/entry-common.c +35 -11
71 lines not on this page · raw message
arch/arm64/kernel/fpsimd.c +13 -8
@@ -119,7 +119,7 @@* whatever is in the FPSIMD registers is not saved to memory, but discarded. */ -static DEFINE_PER_CPU(struct cpu_fp_state, fpsimd_last_state); +DEFINE_PER_CPU(struct cpu_fp_state, fpsimd_last_state); __ro_after_init struct vl_info vl_info[ARM64_VEC_MAX] = {#ifdef CONFIG_ARM64_SVE
@@ -473,12 +473,15 @@ static void fpsimd_save(void)return ;/* -* If a task is in a syscall the ABI allows us to only -* preserve the state shared with FPSIMD so don't bother -* saving the full SVE state in that case. +* Save SVE state if it is live. +* +* The syscall ABI discards live SVE state at syscall entry. When +* entering a syscall, fpsimd_syscall_enter() sets to_save to +* FP_STATE_FPSIMD to allow the SVE state to be lazily discarded until +* either new SVE state is loaded+bound or fpsimd_syscall_exit() is +* called prior to a return to userspace. */ -if ((last->to_save ==FP_STATE_CURRENT &&test_thread_flag (TIF_SVE ) && - !in_syscall (current_pt_regs ())) || +if ((last->to_save ==FP_STATE_CURRENT &&test_thread_flag (TIF_SVE )) || last->to_save ==FP_STATE_SVE ) { save_sve_regs = true; save_ffr = true;
@@ -1514,7 +1517,7 @@ void do_sme_acc(unsigned long esr, struct pt_regs *regs)* If this not a trap due to SME being disabled then something * is being used in the wrong mode, report as SIGILL. */ -if (ESR_ELx_ISS (esr) != ESR_ELx_SME_ISS_SME_DISABLED) { +if (ESR_ELx_SME_ISS_SMTC (esr) != ESR_ELx_SME_ISS_SMTC_SME_DISABLED) {force_signal_inject (SIGILL ,ILL_ILLOPC , regs->pc,0 );return ; }
@@ -1538,6 +1541,8 @@ void do_sme_acc(unsigned long esr, struct pt_regs *regs)sme_set_vq (vq_minus_one);fpsimd_bind_task_to_cpu (); + }else { +fpsimd_flush_task_state (current); }put_cpu_fpsimd_context ();
@@ -1803,7 +1808,7 @@ void fpsimd_update_current_state(struct user_fpsimd_state const *state)get_cpu_fpsimd_context (); current->thread.uw.fpsimd_state = *state; -if (test_thread_flag (TIF_SVE )) +if (current->thread.fp_type ==FP_STATE_SVE )fpsimd_to_sve (current);task_fpsimd_load ();
arch/arm64/xen/hypercall.S +20 -1
@@ -83,7 +83,26 @@ HYPERCALL3(vcpu_op); HYPERCALL1(platform_op_raw); HYPERCALL2(multicall); HYPERCALL2(vm_assist); -HYPERCALL3(dm_op); + +SYM_FUNC_START(HYPERVISOR_dm_op) + mov x16, #__HYPERVISOR_dm_op; \ + /* + * dm_op hypercalls are issued by the userspace. The kernel needs to + * enable access to TTBR0_EL1 as the hypervisor would issue stage 1 + * translations to user memory via AT instructions. Since AT + * instructions are not affected by the PAN bit (ARMv8.1), we only + * need the explicit uaccess_enable/disable if the TTBR0 PAN emulation + * is enabled (it implies that hardware UAO and PAN disabled). + */ + uaccess_ttbr0_enable x6, x7, x8 + hvc XEN_IMM + + /* + * Disable userspace access from kernel once the hyp call completed. + */ + uaccess_ttbr0_disable x6, x7 + ret +SYM_FUNC_END(HYPERVISOR_dm_op); SYM_FUNC_START(privcmd_call) mov x16, x0
arch/m68k/mac/config.c +1 -1
@@ -801,7 +801,7 @@ static void __init mac_identify(void) } macintosh_config = mac_data_table; -for (m = macintosh_config; m->ident !=-1 ; m++) { +for (m = &mac_data_table[1 ]; m->ident !=-1 ; m++) {if (m->ident == model) { macintosh_config = m;break ;
arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts +1 -0
@@ -29,6 +29,7 @@ msi: msi-controller@2ff00000 { compatible = "loongson,pch-msi-1.0"; reg = <0 0x2ff00000 0 0x8>; interrupt-controller; + #interrupt-cells = <1>; msi-controller; loongson,msi-base-vec = <64>; loongson,msi-num-vecs = <64>;
arch/powerpc/kernel/Makefile +1 -1
@@ -165,7 +165,7 @@ endif obj64-$(CONFIG_PPC_TRANSACTIONAL_MEM) += tm.o -ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC_CORE)(CONFIG_PPC_BOOK3S),) +ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC_CORE)$(CONFIG_PPC_BOOK3S),) obj-y += ppc_save_regs.o endif
arch/powerpc/kexec/crash.c +4 -1
@@ -356,7 +356,10 @@ void default_machine_crash_shutdown(struct pt_regs *regs)if (TRAP (regs) ==INTERRUPT_SYSTEM_RESET ) is_via_system_reset =1 ; -crash_smp_send_stop (); +if (IS_ENABLED (CONFIG_SMP )) +crash_smp_send_stop (); +else +crash_kexec_prepare ();crash_save_cpu (regs, crashing_cpu);
arch/powerpc/platforms/book3s/vas-api.c +9 -0
@@ -521,6 +521,15 @@ static int coproc_mmap(struct file *fp, struct vm_area_struct *vma)return -EINVAL ; } +/* +* Map complete page to the paste address. So the user +* space should pass 0ULL to the offset parameter. +*/ +if (vma->vm_pgoff) { +pr_debug ("Page offset unsupported to map paste address\n" ); +return -EINVAL ; + } +/* Ensure instance has an open send window */ if (!txwin) {pr_err ("No send window open?\n" );
arch/powerpc/platforms/powernv/memtrace.c +6 -2
@@ -48,11 +48,15 @@ static ssize_t memtrace_read(struct file *filp, char __user *ubuf,static int memtrace_mmap (struct file *filp,struct vm_area_struct *vma) {struct memtrace_entry *ent = filp->private_data; +unsigned long ent_nrpages = ent->size >>PAGE_SHIFT ; +unsigned long vma_nrpages =vma_pages (vma); -if (ent->size < vma->vm_end - vma->vm_start) +/* The requested page offset should be within object's page count */ +if (vma->vm_pgoff >= ent_nrpages)return -EINVAL ; -if (vma->vm_pgoff <<PAGE_SHIFT >= ent->size) +/* The requested mapping range should remain within the bounds */ +if (vma_nrpages > ent_nrpages - vma->vm_pgoff)return -EINVAL ; vma->vm_page_prot =pgprot_noncached (vma->vm_page_prot);
arch/riscv/kvm/vcpu_sbi.c +2 -2
@@ -103,9 +103,9 @@ void kvm_riscv_vcpu_sbi_system_reset(struct kvm_vcpu *vcpu,struct kvm_vcpu *tmp;kvm_for_each_vcpu (i, tmp, vcpu->kvm) { -spin_lock (&vcpu->arch.mp_state_lock); +spin_lock (&tmp->arch.mp_state_lock);WRITE_ONCE (tmp->arch.mp_state.mp_state,KVM_MP_STATE_STOPPED ); -spin_unlock (&vcpu->arch.mp_state_lock); +spin_unlock (&tmp->arch.mp_state_lock); }kvm_make_all_cpus_request (vcpu->kvm,KVM_REQ_SLEEP );
arch/s390/net/bpf_jit_comp.c +5 -7
@@ -587,17 +587,15 @@ static void bpf_jit_prologue(struct bpf_jit *jit, struct bpf_prog *fp, }/* Setup stack and backchain */ if (is_first_pass (jit) || (jit->seen &SEEN_STACK )) { -if (is_first_pass (jit) || (jit->seen &SEEN_FUNC )) -/* lgr %w1,%r15 (backchain) */ -EMIT4 (0xb9040000 ,REG_W1 ,REG_15 ); +/* lgr %w1,%r15 (backchain) */ +EMIT4 (0xb9040000 ,REG_W1 ,REG_15 );/* la %bfp,STK_160_UNUSED(%r15) (BPF frame pointer) */ EMIT4_DISP (0x41000000 ,BPF_REG_FP ,REG_15 ,STK_160_UNUSED );/* aghi %r15,-STK_OFF */ EMIT4_IMM (0xa70b0000 ,REG_15 , -(STK_OFF + stack_depth)); -if (is_first_pass (jit) || (jit->seen &SEEN_FUNC )) -/* stg %w1,152(%r15) (backchain) */ -EMIT6_DISP_LH (0xe3000000 ,0x0024 ,REG_W1 ,REG_0 , -REG_15 ,152 ); +/* stg %w1,152(%r15) (backchain) */ +EMIT6_DISP_LH (0xe3000000 ,0x0024 ,REG_W1 ,REG_0 , +REG_15 ,152 ); } }
arch/x86/include/asm/mwait.h +3 -6
@@ -108,13 +108,10 @@ static __always_inline void __sti_mwait(unsigned long eax, unsigned long ecx) static __always_inline void mwait_idle_with_hints(unsigned long eax, unsigned long ecx) {if (static_cpu_has_bug (X86_BUG_MONITOR ) || !current_set_polling_and_test ()) { -if (static_cpu_has_bug (X86_BUG_CLFLUSH_MONITOR )) { -mb (); -clflush ((void *)¤t_thread_info ()->flags); -mb (); - } +const void *addr = ¤t_thread_info ()->flags; -__monitor ((void *)¤t_thread_info ()->flags,0 ,0 ); + alternative_input("", "clflush (%[addr])", X86_BUG_CLFLUSH_MONITOR, [addr] "a" (addr)); +__monitor (addr,0 ,0 );if (!need_resched ()) {if (ecx &1 ) {
arch/x86/kernel/cpu/common.c +9 -8
@@ -1066,17 +1066,18 @@ void get_cpu_cap(struct cpuinfo_x86 *c) c->x86_capability[CPUID_D_1_EAX ] = eax; } -/* AMD-defined flags: level 0x80000001 */ +/* +* Check if extended CPUID leaves are implemented: Max extended +* CPUID leaf must be in the 0x80000001-0x8000ffff range. +*/ eax =cpuid_eax (0x80000000 ); - c->extended_cpuid_level = eax; + c->extended_cpuid_level = ((eax &0xffff0000 ) ==0x80000000 ) ? eax :0 ; -if ((eax &0xffff0000 ) ==0x80000000 ) { -if (eax >=0x80000001 ) { -cpuid (0x80000001 , &eax, &ebx, &ecx, &edx); +if (c->extended_cpuid_level >=0x80000001 ) { +cpuid (0x80000001 , &eax, &ebx, &ecx, &edx); - c->x86_capability[CPUID_8000_0001_ECX ] = ecx; - c->x86_capability[CPUID_8000_0001_EDX ] = edx; - } + c->x86_capability[CPUID_8000_0001_ECX ] = ecx; + c->x86_capability[CPUID_8000_0001_EDX ] = edx; }if (c->extended_cpuid_level >=0x80000007 ) {
arch/x86/kernel/cpu/microcode/core.c +2 -0
@@ -703,6 +703,8 @@ static int load_late_locked(void)return load_late_stop_cpus (true);case UCODE_NFOUND :return -ENOENT ; +case UCODE_OK : +return 0 ;default :return -EBADFD ; }
arch/x86/kernel/cpu/mtrr/generic.c +1 -1
@@ -582,7 +582,7 @@ static void get_fixed_ranges(mtrr_type *frs)void mtrr_save_fixed_ranges (void *info) { -if (boot_cpu_has (X86_FEATURE_MTRR )) +if (mtrr_state.have_fixed)get_fixed_ranges (mtrr_state.fixed_ranges); }
arch/x86/kernel/ioport.c +9 -4
@@ -33,8 +33,9 @@ void io_bitmap_share(struct task_struct *tsk)set_tsk_thread_flag (tsk,TIF_IO_BITMAP ); } -static void task_update_io_bitmap (struct task_struct *tsk) +static void task_update_io_bitmap (void ) { +struct task_struct *tsk = current;struct thread_struct *t = &tsk->thread;if (t->iopl_emul ==3 || t->io_bitmap) {
@@ -54,7 +55,12 @@ void io_bitmap_exit(struct task_struct *tsk)struct io_bitmap *iobm = tsk->thread.io_bitmap; tsk->thread.io_bitmap =NULL ; -task_update_io_bitmap (tsk); +/* +* Don't touch the TSS when invoked on a failed fork(). TSS +* reflects the state of @current and not the state of @tsk. +*/ +if (tsk == current) +task_update_io_bitmap ();if (iobm &&refcount_dec_and_test (&iobm->refcnt))kfree (iobm); }
@@ -192,8 +198,7 @@ SYSCALL_DEFINE1(iopl, unsigned int, level) } t->iopl_emul = level; -task_update_io_bitmap (current); - +task_update_io_bitmap ();return 0 ; }
arch/x86/kernel/process.c +9 -6
@@ -180,6 +180,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) frame->ret_addr = (unsigned long ) ret_from_fork_asm; p->thread.sp = (unsigned long ) fork_frame; p->thread.io_bitmap =NULL ; +clear_tsk_thread_flag (p,TIF_IO_BITMAP ); p->thread.iopl_warn =0 ;memset (p->thread.ptrace_bps,0 ,sizeof (p->thread.ptrace_bps));
@@ -468,6 +469,11 @@ void native_tss_update_io_bitmap(void) }else {struct io_bitmap *iobm = t->io_bitmap; +if (WARN_ON_ONCE (!iobm)) { +clear_thread_flag (TIF_IO_BITMAP ); +native_tss_invalidate_io_bitmap (); + } +/* * Only copy bitmap data when the sequence number differs. The * update time is accounted to the incoming task.
@@ -923,13 +929,10 @@ static int prefer_mwait_c1_over_halt(const struct cpuinfo_x86 *c) static __cpuidle void mwait_idle(void) {if (!current_set_polling_and_test ()) { -if (this_cpu_has (X86_BUG_CLFLUSH_MONITOR )) { -mb ();/* quirk */ -clflush ((void *)¤t_thread_info ()->flags); -mb ();/* quirk */ - } +const void *addr = ¤t_thread_info ()->flags; -__monitor ((void *)¤t_thread_info ()->flags,0 ,0 ); + alternative_input("", "clflush (%[addr])", X86_BUG_CLFLUSH_MONITOR, [addr] "a" (addr)); +__monitor (addr,0 ,0 );if (!need_resched ()) {__sti_mwait (0 ,0 );raw_local_irq_disable ();
crypto/lrw.c +2 -2
@@ -322,7 +322,7 @@ static int lrw_create(struct crypto_template *tmpl, struct rtattr **tb) err =crypto_grab_skcipher (spawn,skcipher_crypto_instance (inst), cipher_name,0 , mask); -if (err == -ENOENT ) { +if (err == -ENOENT &&memcmp (cipher_name,"ecb(" ,4 )) { err = -ENAMETOOLONG ;if (snprintf (ecb_name,CRYPTO_MAX_ALG_NAME ,"ecb(%s)" , cipher_name) >=CRYPTO_MAX_ALG_NAME )
@@ -356,7 +356,7 @@ static int lrw_create(struct crypto_template *tmpl, struct rtattr **tb)/* Alas we screwed up the naming so we have to mangle the * cipher name. */ -if (!strncmp (cipher_name,"ecb(" ,4 )) { +if (!memcmp (cipher_name,"ecb(" ,4 )) {int len; len =strscpy (ecb_name, cipher_name +4 ,sizeof (ecb_name));
crypto/xts.c +2 -2
@@ -363,7 +363,7 @@ static int xts_create(struct crypto_template *tmpl, struct rtattr **tb) err =crypto_grab_skcipher (&ctx->spawn,skcipher_crypto_instance (inst), cipher_name,0 , mask); -if (err == -ENOENT ) { +if (err == -ENOENT &&memcmp (cipher_name,"ecb(" ,4 )) { err = -ENAMETOOLONG ;if (snprintf (name,CRYPTO_MAX_ALG_NAME ,"ecb(%s)" , cipher_name) >=CRYPTO_MAX_ALG_NAME )
@@ -397,7 +397,7 @@ static int xts_create(struct crypto_template *tmpl, struct rtattr **tb)/* Alas we screwed up the naming so we have to mangle the * cipher name. */ -if (!strncmp (cipher_name,"ecb(" ,4 )) { +if (!memcmp (cipher_name,"ecb(" ,4 )) {int len; len =strscpy (name, cipher_name +4 ,sizeof (name));
drivers/acpi/acpica/exserial.c +6 -0
@@ -201,6 +201,12 @@ acpi_ex_read_serial_bus(union acpi_operand_object *obj_desc, function =ACPI_READ ;break ; +case ACPI_ADR_SPACE_FIXED_HARDWARE : + + buffer_length =ACPI_FFH_INPUT_BUFFER_SIZE ; + function =ACPI_READ ; +break ; +default :return_ACPI_STATUS (AE_AML_INVALID_SPACE_ID ); }
drivers/acpi/apei/Kconfig +1 -0
@@ -23,6 +23,7 @@ config ACPI_APEI_GHES select ACPI_HED select IRQ_WORK select GENERIC_ALLOCATOR + select ARM_SDE_INTERFACE if ARM64 help Generic Hardware Error Source provides a way to report platform hardware errors (such as that from chipset). It
drivers/acpi/apei/ghes.c +1 -1
@@ -1523,7 +1523,7 @@ void __init acpi_ghes_init(void) {int rc; -sdei_init (); +acpi_sdei_init ();if (acpi_disabled)return ;
drivers/acpi/cppc_acpi.c +1 -1
@@ -461,7 +461,7 @@ bool cppc_allow_fast_switch(void)struct cpc_desc *cpc_ptr;int cpu; -for_each_possible_cpu (cpu) { +for_each_present_cpu (cpu) { cpc_ptr =per_cpu (cpc_desc_ptr, cpu); desired_reg = &cpc_ptr->cpc_regs[DESIRED_PERF ]; if (!CPC_IN_SYSTEM_MEMORY(desired_reg) &&
drivers/acpi/osi.c +0 -1
@@ -42,7 +42,6 @@ static struct acpi_osi_entry osi_setup_entries[OSI_STRING_ENTRIES_MAX] __initdata = { {"Module Device", true}, {"Processor Device", true}, - {"3.0 _SCP Extensions", true}, {"Processor Aggregator Device", true}, };
drivers/base/power/domain.c +1 -1
@@ -2856,7 +2856,7 @@ struct device *genpd_dev_pm_attach_by_id(struct device *dev,/* Verify that the index is within a valid range. */ num_domains =of_count_phandle_with_args (dev->of_node,"power-domains" ,"#power-domain-cells" ); -if (index >= num_domains) +if (num_domains <0 || index >= num_domains)return NULL ;/* Allocate and register device on the genpd bus. */
drivers/base/power/main.c +2 -1
@@ -897,6 +897,8 @@ static void __device_resume(struct device *dev, pm_message_t state, bool async)if (!dev->power.is_suspended) goto Complete; + dev->power.is_suspended = false; +if (dev->power.direct_complete) {/* Match the pm_runtime_disable() in __device_suspend(). */ pm_runtime_enable (dev);
@@ -952,7 +954,6 @@ static void __device_resume(struct device *dev, pm_message_t state, bool async) End: error =dpm_run_callback (callback, dev, state, info); - dev->power.is_suspended = false;device_unlock (dev);dpm_watchdog_clear (&wd);
drivers/bluetooth/hci_qca.c +7 -7
@@ -2307,14 +2307,14 @@ static int qca_serdev_probe(struct serdev_device *serdev) qcadev->bt_en =devm_gpiod_get_optional (&serdev->dev,"enable" ,GPIOD_OUT_LOW ); -if (IS_ERR (qcadev->bt_en) && - (data->soc_type ==QCA_WCN6750 || - data->soc_type ==QCA_WCN6855 )) { -dev_err (&serdev->dev,"failed to acquire BT_EN gpio\n" ); -return PTR_ERR (qcadev->bt_en); - } +if (IS_ERR (qcadev->bt_en)) +return dev_err_probe (&serdev->dev, +PTR_ERR (qcadev->bt_en), +"failed to acquire BT_EN gpio\n" ); -if (!qcadev->bt_en) +if (!qcadev->bt_en && + (data->soc_type ==QCA_WCN6750 || + data->soc_type ==QCA_WCN6855 )) power_ctrl_enabled = false; qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
drivers/bus/fsl-mc/fsl-mc-bus.c +4 -2
@@ -905,8 +905,10 @@ int fsl_mc_device_add(struct fsl_mc_obj_desc *obj_desc, error_cleanup_dev:kfree (mc_dev->regions); -kfree (mc_bus); -kfree (mc_dev); +if (mc_bus) +kfree (mc_bus); +else +kfree (mc_dev);return error; }
drivers/clk/bcm/clk-raspberrypi.c +2 -0
@@ -271,6 +271,8 @@ static struct clk_hw *raspberrypi_clk_register(struct raspberrypi_clk *rpi, init.name =devm_kasprintf (rpi->dev,GFP_KERNEL ,"fw-clk-%s" , rpi_firmware_clk_names[id]); +if (!init.name) +return ERR_PTR (-ENOMEM ); init.ops = &raspberrypi_firmware_clk_ops; init.flags =CLK_GET_RATE_NOCACHE ;
drivers/clk/qcom/camcc-sm6350.c +18 -0
@@ -1694,6 +1694,9 @@ static struct clk_branch camcc_sys_tmr_clk = {static struct gdsc bps_gdsc = { .gdscr =0x6004 , + .en_rest_wait_val =0x2 , + .en_few_wait_val =0x2 , + .clk_dis_wait_val =0xf , .pd = { .name ="bps_gdsc" , },
@@ -1703,6 +1706,9 @@ static struct gdsc bps_gdsc = {static struct gdsc ipe_0_gdsc = { .gdscr =0x7004 , + .en_rest_wait_val =0x2 , + .en_few_wait_val =0x2 , + .clk_dis_wait_val =0xf , .pd = { .name ="ipe_0_gdsc" , },
@@ -1712,6 +1718,9 @@ static struct gdsc ipe_0_gdsc = {static struct gdsc ife_0_gdsc = { .gdscr =0x9004 , + .en_rest_wait_val =0x2 , + .en_few_wait_val =0x2 , + .clk_dis_wait_val =0xf , .pd = { .name ="ife_0_gdsc" , },
@@ -1720,6 +1729,9 @@ static struct gdsc ife_0_gdsc = {static struct gdsc ife_1_gdsc = { .gdscr =0xa004 , + .en_rest_wait_val =0x2 , + .en_few_wait_val =0x2 , + .clk_dis_wait_val =0xf , .pd = { .name ="ife_1_gdsc" , },
@@ -1728,6 +1740,9 @@ static struct gdsc ife_1_gdsc = {static struct gdsc ife_2_gdsc = { .gdscr =0xb004 , + .en_rest_wait_val =0x2 , + .en_few_wait_val =0x2 , + .clk_dis_wait_val =0xf , .pd = { .name ="ife_2_gdsc" , },
@@ -1736,6 +1751,9 @@ static struct gdsc ife_2_gdsc = {static struct gdsc titan_top_gdsc = { .gdscr =0x14004 , + .en_rest_wait_val =0x2 , + .en_few_wait_val =0x2 , + .clk_dis_wait_val =0xf , .pd = { .name ="titan_top_gdsc" , },
drivers/clk/qcom/dispcc-sm6350.c +3 -0
@@ -680,6 +680,9 @@ static struct clk_branch disp_cc_xo_clk = {static struct gdsc mdss_gdsc = { .gdscr =0x1004 , + .en_rest_wait_val =0x2 , + .en_few_wait_val =0x2 , + .clk_dis_wait_val =0xf , .pd = { .name ="mdss_gdsc" , },
drivers/clk/qcom/gcc-msm8939.c +2 -2
@@ -432,7 +432,7 @@ static const struct parent_map gcc_xo_gpll0_gpll1a_gpll6_sleep_map[] = { { P_XO, 0 }, { P_GPLL0, 1 }, { P_GPLL1_AUX, 2 }, - { P_GPLL6, 2 }, + { P_GPLL6, 3 }, { P_SLEEP_CLK, 6 }, };
@@ -1100,7 +1100,7 @@ static struct clk_rcg2 jpeg0_clk_src = { };static const struct freq_tbl ftbl_gcc_camss_mclk0_1_clk[] = { -F (24000000 ,P_GPLL0 ,1 ,1 ,45 ), +F (24000000 ,P_GPLL6 ,1 ,1 ,45 ),F (66670000 ,P_GPLL0 ,12 ,0 ,0 ), { } };
drivers/clk/qcom/gcc-sm6350.c +6 -0
@@ -2320,6 +2320,9 @@ static struct clk_branch gcc_video_xo_clk = {static struct gdsc usb30_prim_gdsc = { .gdscr =0x1a004 , + .en_rest_wait_val =0x2 , + .en_few_wait_val =0x2 , + .clk_dis_wait_val =0xf , .pd = { .name ="usb30_prim_gdsc" , },
@@ -2328,6 +2331,9 @@ static struct gdsc usb30_prim_gdsc = {static struct gdsc ufs_phy_gdsc = { .gdscr =0x3a004 , + .en_rest_wait_val =0x2 , + .en_few_wait_val =0x2 , + .clk_dis_wait_val =0xf , .pd = { .name ="ufs_phy_gdsc" , },
drivers/clk/qcom/gpucc-sm6350.c +6 -0
@@ -412,6 +412,9 @@ static struct clk_branch gpu_cc_gx_vsense_clk = {static struct gdsc gpu_cx_gdsc = { .gdscr =0x106c , .gds_hw_ctrl =0x1540 , + .en_rest_wait_val =0x2 , + .en_few_wait_val =0x2 , + .clk_dis_wait_val =0x8 , .pd = { .name ="gpu_cx_gdsc" , },
@@ -422,6 +425,9 @@ static struct gdsc gpu_cx_gdsc = {static struct gdsc gpu_gx_gdsc = { .gdscr =0x100c , .clamp_io_ctrl =0x1508 , + .en_rest_wait_val =0x2 , + .en_few_wait_val =0x2 , + .clk_dis_wait_val =0x2 , .pd = { .name ="gpu_gx_gdsc" , .power_on = gdsc_gx_do_nothing_enable,
drivers/counter/interrupt-cnt.c +9 -0
@@ -3,12 +3,14 @@* Copyright (c) 2021 Pengutronix, Oleksij Rempel <[email protected]> */ +#include <linux/cleanup.h> #include <linux/counter.h> #include <linux/gpio/consumer.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/mod_devicetable.h> #include <linux/module.h> +#include <linux/mutex.h> #include <linux/platform_device.h> #include <linux/types.h>
@@ -19,6 +21,7 @@ struct interrupt_cnt_priv {struct gpio_desc *gpio;int irq;bool enabled; +struct mutex lock;struct counter_signal signals;struct counter_synapse synapses;struct counter_count cnts;
@@ -41,6 +44,8 @@ static int interrupt_cnt_enable_read(struct counter_device *counter, {struct interrupt_cnt_priv *priv =counter_priv (counter); +guard (mutex)(&priv->lock); + *enable = priv->enabled;return 0 ;
@@ -51,6 +56,8 @@ static int interrupt_cnt_enable_write(struct counter_device *counter, {struct interrupt_cnt_priv *priv =counter_priv (counter); +guard (mutex)(&priv->lock); +if (priv->enabled == enable)return 0 ;
@@ -227,6 +234,8 @@ static int interrupt_cnt_probe(struct platform_device *pdev)if (ret)return ret; +mutex_init (&priv->lock); + ret =devm_counter_add (dev, counter);if (ret <0 )return dev_err_probe (dev, ret,"Failed to add counter\n" );
drivers/cpufreq/acpi-cpufreq.c +1 -1
@@ -659,7 +659,7 @@ static u64 get_max_boost_ratio(unsigned int cpu, u64 *nominal_freq) nominal_perf = perf_caps.nominal_perf;if (nominal_freq) - *nominal_freq = perf_caps.nominal_freq; + *nominal_freq = perf_caps.nominal_freq *1000 ;if (!highest_perf || !nominal_perf) {pr_debug ("CPU%d: highest or nominal performance missing\n" , cpu);
drivers/crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c +5 -2
@@ -275,13 +275,16 @@ static int sun8i_ce_cipher_prepare(struct crypto_engine *engine, void *async_req }else {if (nr_sgs >0 )dma_unmap_sg (ce->dev, areq->src, ns,DMA_TO_DEVICE ); -dma_unmap_sg (ce->dev, areq->dst, nd,DMA_FROM_DEVICE ); + +if (nr_sgd >0 ) +dma_unmap_sg (ce->dev, areq->dst, nd,DMA_FROM_DEVICE ); } theend_iv:if (areq->iv && ivsize >0 ) { -if (rctx->addr_iv) +if (!dma_mapping_error (ce->dev, rctx->addr_iv))dma_unmap_single (ce->dev, rctx->addr_iv, rctx->ivlen,DMA_TO_DEVICE ); + offset = areq->cryptlen - ivsize;if (rctx->op_dir &CE_DECRYPTION ) {memcpy (areq->iv, chan->backup_iv, ivsize);
drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c +21 -13
@@ -343,9 +343,8 @@ int sun8i_ce_hash_run(struct crypto_engine *engine, void *breq)u32 common;u64 byte_count;__le32 *bf; -void *buf =NULL ; +void *buf, *result;int j, i, todo; -void *result =NULL ;u64 bs;int digestsize;dma_addr_t addr_res, addr_pad;
@@ -365,14 +364,14 @@ int sun8i_ce_hash_run(struct crypto_engine *engine, void *breq) buf =kzalloc (bs *2 ,GFP_KERNEL |GFP_DMA );if (!buf) { err = -ENOMEM ; - goto theend; + goto err_out; } bf = (__le32 *)buf; result =kzalloc (digestsize,GFP_KERNEL |GFP_DMA );if (!result) { err = -ENOMEM ; - goto theend; + goto err_free_buf; } flow = rctx->flow;
@@ -398,7 +397,7 @@ int sun8i_ce_hash_run(struct crypto_engine *engine, void *breq)if (nr_sgs <=0 || nr_sgs >MAX_SG ) {dev_err (ce->dev,"Invalid sg number %d\n" , nr_sgs); err = -EINVAL ; - goto theend; + goto err_free_result; } len = areq->nbytes;
@@ -411,7 +410,7 @@ int sun8i_ce_hash_run(struct crypto_engine *engine, void *breq)if (len >0 ) {dev_err (ce->dev,"remaining len %d\n" , len); err = -EINVAL ; - goto theend; + goto err_unmap_src; } addr_res =dma_map_single (ce->dev, result, digestsize,DMA_FROM_DEVICE ); cet->t_dst[0 ].addr =cpu_to_le32 (addr_res);
@@ -419,7 +418,7 @@ int sun8i_ce_hash_run(struct crypto_engine *engine, void *breq)if (dma_mapping_error (ce->dev, addr_res)) {dev_err (ce->dev,"DMA map dest\n" ); err = -EINVAL ; - goto theend; + goto err_unmap_src; } byte_count = areq->nbytes;
@@ -441,7 +440,7 @@ int sun8i_ce_hash_run(struct crypto_engine *engine, void *breq) }if (!j) { err = -EINVAL ; - goto theend; + goto err_unmap_result; } addr_pad =dma_map_single (ce->dev, buf, j *4 ,DMA_TO_DEVICE );
@@ -450,7 +449,7 @@ int sun8i_ce_hash_run(struct crypto_engine *engine, void *breq)if (dma_mapping_error (ce->dev, addr_pad)) {dev_err (ce->dev,"DMA error on padding SG\n" ); err = -EINVAL ; - goto theend; + goto err_unmap_result; }if (ce->variant->hash_t_dlen_in_bits)
@@ -463,16 +462,25 @@ int sun8i_ce_hash_run(struct crypto_engine *engine, void *breq) err =sun8i_ce_run_task (ce, flow,crypto_ahash_alg_name (tfm));dma_unmap_single (ce->dev, addr_pad, j *4 ,DMA_TO_DEVICE ); -dma_unmap_sg (ce->dev, areq->src, ns,DMA_TO_DEVICE ); + +err_unmap_result:dma_unmap_single (ce->dev, addr_res, digestsize,DMA_FROM_DEVICE ); +if (!err) +memcpy (areq->result, result, algt->alg.hash.base.halg.digestsize); +err_unmap_src: +dma_unmap_sg (ce->dev, areq->src, ns,DMA_TO_DEVICE ); -memcpy (areq->result, result, algt->alg.hash.base.halg.digestsize); -theend: -kfree (buf); +err_free_result:kfree (result); + +err_free_buf: +kfree (buf); + +err_out:local_bh_disable ();crypto_finalize_hash_request (engine, breq, err);local_bh_enable (); +return 0 ; }
drivers/crypto/allwinner/sun8i-ce/sun8i-ce.h +1 -1
@@ -293,8 +293,8 @@ struct sun8i_ce_hash_tfm_ctx {* @flow: the flow to use for this request */ struct sun8i_ce_hash_reqctx { -struct ahash_request fallback_req;int flow; +struct ahash_request fallback_req;// keep at the end };/*
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c +1 -1
@@ -141,7 +141,7 @@ static int sun8i_ss_setup_ivs(struct skcipher_request *areq)/* we need to copy all IVs from source in case DMA is bi-directionnal */ while (sg && len) { -if (sg_dma_len (sg) ==0 ) { +if (sg->length ==0 ) { sg =sg_next (sg);continue ; }
drivers/crypto/marvell/cesa/cipher.c +3 -0
@@ -459,6 +459,9 @@ static int mv_cesa_skcipher_queue_req(struct skcipher_request *req,struct mv_cesa_skcipher_req *creq =skcipher_request_ctx (req);struct mv_cesa_engine *engine; +if (!req->cryptlen) +return 0 ; + ret =mv_cesa_skcipher_req_init (req, tmpl);if (ret)return ret;
drivers/crypto/marvell/cesa/hash.c +1 -1
@@ -663,7 +663,7 @@ static int mv_cesa_ahash_dma_req_init(struct ahash_request *req)if (ret) goto err_free_tdma; -if (iter.src.sg) { +if (iter.base.len > iter.src.op_offset) {/* * Add all the new data, inserting an operation block and * launch command between each full SRAM block-worth of
drivers/dma/ti/k3-udma.c +2 -1
@@ -5537,7 +5537,8 @@ static int udma_probe(struct platform_device *pdev) uc->config.dir =DMA_MEM_TO_MEM ; uc->name =devm_kasprintf (dev,GFP_KERNEL ,"%s chan%d" ,dev_name (dev), i); - +if (!uc->name) +return -ENOMEM ;vchan_init (&uc->vc, &ud->ddev);/* Use custom vchan completion handling */ tasklet_setup (&uc->vc.task, udma_vchan_complete);
drivers/edac/i10nm_base.c +19 -16
@@ -99,7 +99,7 @@ static u32 offsets_demand2_spr[] = {0x22c70, 0x22d80, 0x22f18, 0x22d58, 0x22c64,static u32 offsets_demand_spr_hbm0[] = {0x2a54 ,0x2a60 ,0x2b10 ,0x2a58 ,0x2a5c ,0x0ee0 };static u32 offsets_demand_spr_hbm1[] = {0x2e54 ,0x2e60 ,0x2f10 ,0x2e58 ,0x2e5c ,0x0fb0 }; -static void __enable_retry_rd_err_log (struct skx_imc *imc,int chan,bool enable, +static void __enable_retry_rd_err_log (struct skx_imc *imc,int chan,bool enable,u32 *rrl_ctl,u32 *offsets_scrub,u32 *offsets_demand,u32 *offsets_demand2) {
@@ -112,10 +112,10 @@ static void __enable_retry_rd_err_log(struct skx_imc *imc, int chan, bool enableif (enable) {/* Save default configurations */ - imc->chan[chan].retry_rd_err_log_s = s; - imc->chan[chan].retry_rd_err_log_d = d; + rrl_ctl[0 ] = s; + rrl_ctl[1 ] = d;if (offsets_demand2) - imc->chan[chan].retry_rd_err_log_d2 = d2; + rrl_ctl[2 ] = d2; s &= ~RETRY_RD_ERR_LOG_NOOVER_UC ; s |=RETRY_RD_ERR_LOG_EN ;
@@ -129,25 +129,25 @@ static void __enable_retry_rd_err_log(struct skx_imc *imc, int chan, bool enable } }else {/* Restore default configurations */ -if (imc->chan[chan].retry_rd_err_log_s &RETRY_RD_ERR_LOG_UC ) +if (rrl_ctl[0 ] &RETRY_RD_ERR_LOG_UC ) s |=RETRY_RD_ERR_LOG_UC ; -if (imc->chan[chan].retry_rd_err_log_s &RETRY_RD_ERR_LOG_NOOVER ) +if (rrl_ctl[0 ] &RETRY_RD_ERR_LOG_NOOVER ) s |=RETRY_RD_ERR_LOG_NOOVER ; -if (!(imc->chan[chan].retry_rd_err_log_s &RETRY_RD_ERR_LOG_EN )) +if (!(rrl_ctl[0 ] &RETRY_RD_ERR_LOG_EN )) s &= ~RETRY_RD_ERR_LOG_EN ; -if (imc->chan[chan].retry_rd_err_log_d &RETRY_RD_ERR_LOG_UC ) +if (rrl_ctl[1 ] &RETRY_RD_ERR_LOG_UC ) d |=RETRY_RD_ERR_LOG_UC ; -if (imc->chan[chan].retry_rd_err_log_d &RETRY_RD_ERR_LOG_NOOVER ) +if (rrl_ctl[1 ] &RETRY_RD_ERR_LOG_NOOVER ) d |=RETRY_RD_ERR_LOG_NOOVER ; -if (!(imc->chan[chan].retry_rd_err_log_d &RETRY_RD_ERR_LOG_EN )) +if (!(rrl_ctl[1 ] &RETRY_RD_ERR_LOG_EN )) d &= ~RETRY_RD_ERR_LOG_EN ;if (offsets_demand2) { -if (imc->chan[chan].retry_rd_err_log_d2 &RETRY_RD_ERR_LOG_UC ) +if (rrl_ctl[2 ] &RETRY_RD_ERR_LOG_UC ) d2 |=RETRY_RD_ERR_LOG_UC ; -if (!(imc->chan[chan].retry_rd_err_log_d2 &RETRY_RD_ERR_LOG_NOOVER )) +if (!(rrl_ctl[2 ] &RETRY_RD_ERR_LOG_NOOVER )) d2 &= ~RETRY_RD_ERR_LOG_NOOVER ; -if (!(imc->chan[chan].retry_rd_err_log_d2 &RETRY_RD_ERR_LOG_EN )) +if (!(rrl_ctl[2 ] &RETRY_RD_ERR_LOG_EN )) d2 &= ~RETRY_RD_ERR_LOG_EN ; } }
@@ -161,6 +161,7 @@ static void __enable_retry_rd_err_log(struct skx_imc *imc, int chan, bool enablestatic void enable_retry_rd_err_log (bool enable) {int i, j, imc_num, chan_num; +struct skx_channel *chan;struct skx_imc *imc;struct skx_dev *d;
@@ -175,8 +176,9 @@ static void enable_retry_rd_err_log(bool enable)if (!imc->mbase)continue ; + chan = d->imc[i].chan;for (j =0 ; j < chan_num; j++) -__enable_retry_rd_err_log (imc, j, enable, +__enable_retry_rd_err_log (imc, j, enable, chan[j].rrl_ctl[0 ], res_cfg->offsets_scrub, res_cfg->offsets_demand, res_cfg->offsets_demand2);
@@ -190,12 +192,13 @@ static void enable_retry_rd_err_log(bool enable)if (!imc->mbase || !imc->hbm_mc)continue ; + chan = d->imc[i].chan;for (j =0 ; j < chan_num; j++) { -__enable_retry_rd_err_log (imc, j, enable, +__enable_retry_rd_err_log (imc, j, enable, chan[j].rrl_ctl[0 ], res_cfg->offsets_scrub_hbm0, res_cfg->offsets_demand_hbm0,NULL ); -__enable_retry_rd_err_log (imc, j, enable, +__enable_retry_rd_err_log (imc, j, enable, chan[j].rrl_ctl[1 ], res_cfg->offsets_scrub_hbm1, res_cfg->offsets_demand_hbm1,NULL );
drivers/edac/skx_common.c +1 -0
@@ -115,6 +115,7 @@ EXPORT_SYMBOL_GPL(skx_adxl_get);void skx_adxl_put (void ) { + adxl_component_count =0 ;kfree (adxl_values);kfree (adxl_msg); }
drivers/edac/skx_common.h +8 -3
@@ -80,6 +80,9 @@*/ #define MCACOD_EXT_MEM_ERR 0x280 +/* Max RRL register sets per {,sub-,pseudo-}channel. */ +#define NUM_RRL_SET 3 +/* * Each cpu socket contains some pci devices that provide global * information, and also some that are local to each of the two
@@ -118,9 +121,11 @@ struct skx_dev {struct skx_channel {struct pci_dev *cdev;struct pci_dev *edev; -u32 retry_rd_err_log_s; -u32 retry_rd_err_log_d; -u32 retry_rd_err_log_d2; +/* +* Two groups of RRL control registers per channel to save default RRL +* settings of two {sub-,pseudo-}channels in Linux RRL control mode. +*/ +u32 rrl_ctl[2 ][NUM_RRL_SET ];struct skx_dimm {u8 close_pg;u8 bank_xor_enable;
drivers/firmware/Kconfig +0 -1
@@ -40,7 +40,6 @@ config ARM_SCPI_POWER_DOMAIN config ARM_SDE_INTERFACE bool "ARM Software Delegated Exception Interface (SDEI)" depends on ARM64 - depends on ACPI_APEI_GHES help The Software Delegated Exception Interface (SDEI) is an ARM standard for registering callbacks from the platform firmware
drivers/firmware/arm_sdei.c +8 -3
@@ -1062,13 +1062,12 @@ static bool __init sdei_present_acpi(void)return true; } -void __init sdei_init (void ) +void __init acpi_sdei_init (void ) {struct platform_device *pdev;int ret; - ret =platform_driver_register (&sdei_driver); -if (ret || !sdei_present_acpi ()) +if (!sdei_present_acpi ())return ; pdev = platform_device_register_simple(sdei_driver.driver.name,
@@ -1081,6 +1080,12 @@ void __init sdei_init(void) } } +static int __init sdei_init (void ) +{ +return platform_driver_register (&sdei_driver); +} +arch_initcall (sdei_init); +int sdei_event_handler (struct pt_regs *regs,struct sdei_registered_event *arg) {
drivers/firmware/efi/libstub/efi-stub-helper.c +1 -0
@@ -561,6 +561,7 @@ efi_status_t efi_load_initrd_cmdline(efi_loaded_image_t *image,* @image: EFI loaded image protocol * @soft_limit: preferred address for loading the initrd * @hard_limit: upper limit address for loading the initrd +* @out: pointer to store the address of the initrd table * * Return: status code */
drivers/firmware/psci/psci.c +3 -1
@@ -759,8 +759,10 @@ int __init psci_dt_init(void) np =of_find_matching_node_and_match (NULL , psci_of_match, &matched_np); -if (!np || !of_device_is_available (np)) +if (!np || !of_device_is_available (np)) { +of_node_put (np);return -ENODEV ; + } init_fn = (psci_initcall_t )matched_np->data; ret =init_fn (np);
drivers/fpga/tests/fpga-mgr-test.c +1 -0
@@ -253,6 +253,7 @@ static void fpga_mgr_test_img_load_sgt(struct kunit *test) img_buf =init_test_buffer (test,IMAGE_SIZE ); sgt =kunit_kzalloc (test,sizeof (*sgt),GFP_KERNEL ); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, sgt); ret =sg_alloc_table (sgt,1 ,GFP_KERNEL );KUNIT_ASSERT_EQ (test, ret,0 );sg_init_one (sgt->sgl, img_buf,IMAGE_SIZE );
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +5 -11
@@ -610,21 +610,15 @@ static void dm_crtc_high_irq(void *interrupt_params)spin_lock_irqsave (&adev_to_drm (adev)->event_lock, flags);if (acrtc->dm_irq_params.stream && - acrtc->dm_irq_params.vrr_params.supported) { -bool replay_en = acrtc->dm_irq_params.stream->link->replay_settings.replay_feature_enabled; -bool psr_en = acrtc->dm_irq_params.stream->link->psr_settings.psr_feature_enabled; -bool fs_active_var_en = acrtc->dm_irq_params.freesync_config.state ==VRR_STATE_ACTIVE_VARIABLE ; - + acrtc->dm_irq_params.vrr_params.supported && + acrtc->dm_irq_params.freesync_config.state == +VRR_STATE_ACTIVE_VARIABLE ) {mod_freesync_handle_v_update (adev->dm.freesync_module, acrtc->dm_irq_params.stream, &acrtc->dm_irq_params.vrr_params); -/* update vmin_vmax only if freesync is enabled, or only if PSR and REPLAY are disabled */ -if (fs_active_var_en || (!fs_active_var_en && !replay_en && !psr_en)) { -dc_stream_adjust_vmin_vmax (adev->dm.dc, - acrtc->dm_irq_params.stream, - &acrtc->dm_irq_params.vrr_params.adjust); - } +dc_stream_adjust_vmin_vmax (adev->dm.dc, acrtc->dm_irq_params.stream, + &acrtc->dm_irq_params.vrr_params.adjust); }/*
drivers/gpu/drm/amd/pm/powerplay/hwmgr/ppatomctrl.c +8 -0
@@ -144,6 +144,10 @@ int atomctrl_initialize_mc_reg_table( vram_info = (ATOM_VRAM_INFO_HEADER_V2_1 *)smu_atom_get_data_table (hwmgr->adev,GetIndexIntoMasterTable (DATA , VRAM_Info), &size, &frev, &crev); +if (!vram_info) { +pr_err ("Could not retrieve the VramInfo table!" ); +return -EINVAL ; + }if (module_index >= vram_info->ucNumOfVRAMModule) {pr_err ("Invalid VramInfo table." );
@@ -181,6 +185,10 @@ int atomctrl_initialize_mc_reg_table_v2_2( vram_info = (ATOM_VRAM_INFO_HEADER_V2_2 *)smu_atom_get_data_table (hwmgr->adev,GetIndexIntoMasterTable (DATA , VRAM_Info), &size, &frev, &crev); +if (!vram_info) { +pr_err ("Could not retrieve the VramInfo table!" ); +return -EINVAL ; + }if (module_index >= vram_info->ucNumOfVRAMModule) {pr_err ("Invalid VramInfo table." );
drivers/gpu/drm/bridge/lontium-lt9611uxc.c +5 -1
@@ -962,7 +962,11 @@ static int lt9611uxc_probe(struct i2c_client *client) } } -return lt9611uxc_audio_init (dev, lt9611uxc); + ret =lt9611uxc_audio_init (dev, lt9611uxc); +if (ret) + goto err_remove_bridge; + +return 0 ; err_remove_bridge:free_irq (client->irq, lt9611uxc);
drivers/gpu/drm/mediatek/mtk_drm_drv.c +23 -8
@@ -431,7 +431,7 @@ static int mtk_drm_kms_init(struct drm_device *drm) ret =drmm_mode_config_init (drm);if (ret) - goto put_mutex_dev; +return ret; drm->mode_config.min_width =64 ; drm->mode_config.min_height =64 ;
@@ -449,8 +449,11 @@ static int mtk_drm_kms_init(struct drm_device *drm)for (i =0 ; i < private->data->mmsys_dev_num; i++) { drm->dev_private = private->all_drm_private[i]; ret =component_bind_all (private->all_drm_private[i]->dev, drm); -if (ret) - goto put_mutex_dev; +if (ret) { +while (--i >=0 ) +component_unbind_all (private->all_drm_private[i]->dev, drm); +return ret; + } }/*
@@ -532,9 +535,6 @@ static int mtk_drm_kms_init(struct drm_device *drm) err_component_unbind:for (i =0 ; i < private->data->mmsys_dev_num; i++)component_unbind_all (private->all_drm_private[i]->dev, drm); -put_mutex_dev: -for (i =0 ; i < private->data->mmsys_dev_num; i++) -put_device (private->all_drm_private[i]->mutex_dev);return ret; }
@@ -608,8 +608,10 @@ static int mtk_drm_bind(struct device *dev)return 0 ; drm =drm_dev_alloc (&mtk_drm_driver, dev); -if (IS_ERR (drm)) -return PTR_ERR (drm); +if (IS_ERR (drm)) { + ret =PTR_ERR (drm); + goto err_put_dev; + } private->drm_master = true; drm->dev_private = private;
@@ -635,18 +637,31 @@ static int mtk_drm_bind(struct device *dev)drm_dev_put (drm);for (i =0 ; i < private->data->mmsys_dev_num; i++) private->all_drm_private[i]->drm =NULL ; +err_put_dev: +for (i =0 ; i < private->data->mmsys_dev_num; i++) { +/* For device_find_child in mtk_drm_get_all_priv() */ +put_device (private->all_drm_private[i]->dev); + } +put_device (private->mutex_dev);return ret; }static void mtk_drm_unbind (struct device *dev) {struct mtk_drm_private *private =dev_get_drvdata (dev); +int i;/* for multi mmsys dev, unregister drm dev in mmsys master */ if (private->drm_master) {drm_dev_unregister (private->drm);mtk_drm_kms_deinit (private->drm);drm_dev_put (private->drm); + +for (i =0 ; i < private->data->mmsys_dev_num; i++) { +/* For device_find_child in mtk_drm_get_all_priv() */ +put_device (private->all_drm_private[i]->dev); + } +put_device (private->mutex_dev); } private->mtk_drm_bound = false; private->drm_master = false;
drivers/gpu/drm/meson/meson_drv.c +1 -1
@@ -168,7 +168,7 @@ static const struct meson_drm_soc_attr meson_drm_soc_attrs[] = {/* S805X/S805Y HDMI PLL won't lock for HDMI PHY freq > 1,65GHz */ { .limits = { - .max_hdmi_phy_freq = 1650000, + .max_hdmi_phy_freq = 1650000000, }, .attrs = (const struct soc_device_attribute []) { { .soc_id = "GXL (S805*)", },
drivers/gpu/drm/meson/meson_drv.h +1 -1
@@ -37,7 +37,7 @@ struct meson_drm_match_data { };struct meson_drm_soc_limits { -unsigned int max_hdmi_phy_freq; +unsigned long long max_hdmi_phy_freq; };struct meson_drm {
drivers/gpu/drm/meson/meson_encoder_hdmi.c +16 -13
@@ -70,12 +70,12 @@ static void meson_encoder_hdmi_set_vclk(struct meson_encoder_hdmi *encoder_hdmi, {struct meson_drm *priv = encoder_hdmi->priv;int vic =drm_match_cea_mode (mode); -unsigned int phy_freq; -unsigned int vclk_freq; -unsigned int venc_freq; -unsigned int hdmi_freq; +unsigned long long phy_freq; +unsigned long long vclk_freq; +unsigned long long venc_freq; +unsigned long long hdmi_freq; - vclk_freq = mode->clock; + vclk_freq = mode->clock *1000ULL ;/* For 420, pixel clock is half unlike venc clock */ if (encoder_hdmi->output_bus_fmt ==MEDIA_BUS_FMT_UYYVYY8_0_5X24 )
@@ -107,7 +107,8 @@ static void meson_encoder_hdmi_set_vclk(struct meson_encoder_hdmi *encoder_hdmi,if (mode->flags &DRM_MODE_FLAG_DBLCLK ) venc_freq /=2 ; -dev_dbg (priv->dev,"vclk:%d phy=%d venc=%d hdmi=%d enci=%d\n" , +dev_dbg (priv->dev, +"phy:%lluHz vclk=%lluHz venc=%lluHz hdmi=%lluHz enci=%d\n" , phy_freq, vclk_freq, venc_freq, hdmi_freq, priv->venc.hdmi_use_enci);
@@ -122,10 +123,11 @@ static enum drm_mode_status meson_encoder_hdmi_mode_valid(struct drm_bridge *bristruct meson_encoder_hdmi *encoder_hdmi =bridge_to_meson_encoder_hdmi (bridge);struct meson_drm *priv = encoder_hdmi->priv;bool is_hdmi2_sink = display_info->hdmi.scdc.supported; -unsigned int phy_freq; -unsigned int vclk_freq; -unsigned int venc_freq; -unsigned int hdmi_freq; +unsigned long long clock = mode->clock *1000ULL ; +unsigned long long phy_freq; +unsigned long long vclk_freq; +unsigned long long venc_freq; +unsigned long long hdmi_freq;int vic =drm_match_cea_mode (mode);enum drm_mode_status status;
@@ -144,12 +146,12 @@ static enum drm_mode_status meson_encoder_hdmi_mode_valid(struct drm_bridge *briif (status !=MODE_OK )return status; -return meson_vclk_dmt_supported_freq (priv, mode->clock); +return meson_vclk_dmt_supported_freq (priv, clock);/* Check against supported VIC modes */ }else if (!meson_venc_hdmi_supported_vic (vic))return MODE_BAD ; - vclk_freq = mode->clock; + vclk_freq = clock;/* For 420, pixel clock is half unlike venc clock */ if (drm_mode_is_420_only(display_info, mode) ||
@@ -179,7 +181,8 @@ static enum drm_mode_status meson_encoder_hdmi_mode_valid(struct drm_bridge *briif (mode->flags &DRM_MODE_FLAG_DBLCLK ) venc_freq /=2 ; -dev_dbg (priv->dev,"%s: vclk:%d phy=%d venc=%d hdmi=%d\n" , +dev_dbg (priv->dev, +"%s: vclk:%lluHz phy=%lluHz venc=%lluHz hdmi=%lluHz\n" , __func__, phy_freq, vclk_freq, venc_freq, hdmi_freq);return meson_vclk_vic_supported_freq (priv, phy_freq, vclk_freq);
drivers/gpu/drm/meson/meson_vclk.c +123 -103
447 lines not on this page · raw message
drivers/gpu/drm/meson/meson_vclk.h +7 -6
@@ -20,17 +20,18 @@ enum { };/* 27MHz is the CVBS Pixel Clock */ -#define MESON_VCLK_CVBS 27000 +#define MESON_VCLK_CVBS (27 * 1000 * 1000)enum drm_mode_status -meson_vclk_dmt_supported_freq (struct meson_drm *priv,unsigned int freq); +meson_vclk_dmt_supported_freq (struct meson_drm *priv,unsigned long long freq);enum drm_mode_status -meson_vclk_vic_supported_freq (struct meson_drm *priv,unsigned int phy_freq, -unsigned int vclk_freq); +meson_vclk_vic_supported_freq (struct meson_drm *priv, +unsigned long long phy_freq, +unsigned long long vclk_freq);void meson_vclk_setup (struct meson_drm *priv,unsigned int target, -unsigned int phy_freq,unsigned int vclk_freq, -unsigned int venc_freq,unsigned int dac_freq, +unsigned long long phy_freq,unsigned long long vclk_freq, +unsigned long long venc_freq,unsigned long long dac_freq,bool hdmi_use_enci);#endif /* __MESON_VCLK_H */
drivers/gpu/drm/renesas/rcar-du/rcar_du_kms.c +4 -6
@@ -705,7 +705,7 @@ static int rcar_du_vsps_init(struct rcar_du_device *rcdu) ret =of_parse_phandle_with_fixed_args (np, vsps_prop_name, cells, i, &args);if (ret <0 ) - goto error; + goto done;/* * Add the VSP to the list or update the corresponding existing
@@ -743,13 +743,11 @@ static int rcar_du_vsps_init(struct rcar_du_device *rcdu) vsp->dev = rcdu; ret =rcar_du_vsp_init (vsp, vsps[i].np, vsps[i].crtcs_mask); -if (ret <0 ) - goto error; +if (ret) + goto done; } -return 0 ; - -error: +done:for (i =0 ; i <ARRAY_SIZE (vsps); ++i)of_node_put (vsps[i].np);
drivers/gpu/drm/tegra/rgb.c +13 -1
@@ -190,6 +190,11 @@ static const struct drm_encoder_helper_funcs tegra_rgb_encoder_helper_funcs = { .atomic_check = tegra_rgb_encoder_atomic_check, }; +static void tegra_dc_of_node_put (void *data) +{ +of_node_put (data); +} +int tegra_dc_rgb_probe (struct tegra_dc *dc) {struct device_node *np;
@@ -197,7 +202,14 @@ int tegra_dc_rgb_probe(struct tegra_dc *dc)int err; np =of_get_child_by_name (dc->dev->of_node,"rgb" ); -if (!np || !of_device_is_available (np)) +if (!np) +return -ENODEV ; + + err =devm_add_action_or_reset (dc->dev, tegra_dc_of_node_put, np); +if (err <0 ) +return err; + +if (!of_device_is_available (np))return -ENODEV ; rgb =devm_kzalloc (dc->dev,sizeof (*rgb),GFP_KERNEL );
drivers/gpu/drm/vc4/tests/vc4_mock_output.c +24 -12
@@ -75,24 +75,30 @@ int vc4_mock_atomic_add_output(struct kunit *test,int ret; encoder =vc4_find_encoder_by_type (drm, type); -KUNIT_ASSERT_NOT_ERR_OR_NULL (test, encoder); +if (!encoder) +return -ENODEV ; crtc =vc4_find_crtc_for_encoder (test, drm, encoder); -KUNIT_ASSERT_NOT_ERR_OR_NULL (test, crtc); +if (!crtc) +return -ENODEV ; output =encoder_to_vc4_dummy_output (encoder); conn = &output->connector; conn_state =drm_atomic_get_connector_state (state, conn); -KUNIT_ASSERT_NOT_ERR_OR_NULL (test, conn_state); +if (IS_ERR (conn_state)) +return PTR_ERR (conn_state); ret =drm_atomic_set_crtc_for_connector (conn_state, crtc); -KUNIT_EXPECT_EQ (test, ret,0 ); +if (ret) +return ret; crtc_state =drm_atomic_get_crtc_state (state, crtc); -KUNIT_ASSERT_NOT_ERR_OR_NULL (test, crtc_state); +if (IS_ERR (crtc_state)) +return PTR_ERR (crtc_state); ret =drm_atomic_set_mode_for_crtc (crtc_state, &default_mode); -KUNIT_EXPECT_EQ (test, ret,0 ); +if (ret) +return ret; crtc_state->active = true;
@@ -113,26 +119,32 @@ int vc4_mock_atomic_del_output(struct kunit *test,int ret; encoder =vc4_find_encoder_by_type (drm, type); -KUNIT_ASSERT_NOT_ERR_OR_NULL (test, encoder); +if (!encoder) +return -ENODEV ; crtc =vc4_find_crtc_for_encoder (test, drm, encoder); -KUNIT_ASSERT_NOT_ERR_OR_NULL (test, crtc); +if (!crtc) +return -ENODEV ; crtc_state =drm_atomic_get_crtc_state (state, crtc); -KUNIT_ASSERT_NOT_ERR_OR_NULL (test, crtc_state); +if (IS_ERR (crtc_state)) +return PTR_ERR (crtc_state); crtc_state->active = false; ret =drm_atomic_set_mode_for_crtc (crtc_state,NULL ); -KUNIT_ASSERT_EQ (test, ret,0 ); +if (ret) +return ret; output =encoder_to_vc4_dummy_output (encoder); conn = &output->connector; conn_state =drm_atomic_get_connector_state (state, conn); -KUNIT_ASSERT_NOT_ERR_OR_NULL (test, conn_state); +if (IS_ERR (conn_state)) +return PTR_ERR (conn_state); ret =drm_atomic_set_crtc_for_connector (conn_state,NULL ); -KUNIT_ASSERT_EQ (test, ret,0 ); +if (ret) +return ret;return 0 ; }
drivers/gpu/drm/vkms/vkms_crtc.c +1 -1
@@ -201,7 +201,7 @@ static int vkms_crtc_atomic_check(struct drm_crtc *crtc, i++; } - vkms_state->active_planes =kcalloc (i,sizeof (plane),GFP_KERNEL ); + vkms_state->active_planes =kcalloc (i,sizeof (*vkms_state->active_planes),GFP_KERNEL );if (!vkms_state->active_planes)return -ENOMEM ; vkms_state->num_active_planes = i;
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +26 -0
@@ -4083,6 +4083,23 @@ static int vmw_execbuf_tie_context(struct vmw_private *dev_priv,return 0 ; } +/* +* DMA fence callback to remove a seqno_waiter +*/ +struct seqno_waiter_rm_context { +struct dma_fence_cb base; +struct vmw_private *dev_priv; +}; + +static void seqno_waiter_rm_cb (struct dma_fence *f,struct dma_fence_cb *cb) +{ +struct seqno_waiter_rm_context *ctx = + container_of(cb, struct seqno_waiter_rm_context, base); + +vmw_seqno_waiter_remove (ctx->dev_priv); +kfree (ctx); +} + int vmw_execbuf_process(struct drm_file *file_priv, struct vmw_private *dev_priv, void __user *user_commands, void *kernel_commands,
@@ -4263,6 +4280,15 @@ int vmw_execbuf_process(struct drm_file *file_priv, }else {/* Link the fence with the FD created earlier */ fd_install (out_fence_fd, sync_file->file); +struct seqno_waiter_rm_context *ctx = +kmalloc (sizeof (*ctx),GFP_KERNEL ); + ctx->dev_priv = dev_priv; +vmw_seqno_waiter_add (dev_priv); +if (dma_fence_add_callback (&fence->base, &ctx->base, + seqno_waiter_rm_cb) <0 ) { +vmw_seqno_waiter_remove (dev_priv); +kfree (ctx); + } } }
drivers/hid/hid-hyperv.c +2 -2
@@ -192,7 +192,7 @@ static void mousevsc_on_receive_device_info(struct mousevsc_dev *input_device, goto cleanup; input_device->report_desc_size =le16_to_cpu ( - desc->desc[0 ].wDescriptorLength); + desc->rpt_desc.wDescriptorLength);if (input_device->report_desc_size ==0 ) { input_device->dev_info_status = -EINVAL ; goto cleanup;
@@ -210,7 +210,7 @@ static void mousevsc_on_receive_device_info(struct mousevsc_dev *input_device,memcpy (input_device->report_desc, ((unsigned char *)desc) + desc->bLength, -le16_to_cpu (desc->desc[0 ].wDescriptorLength)); +le16_to_cpu (desc->rpt_desc.wDescriptorLength));/* Send the ack */ memset (&ack,0 ,sizeof (struct mousevsc_prt_msg ));
drivers/hid/usbhid/hid-core.c +14 -11
@@ -982,12 +982,11 @@ static int usbhid_parse(struct hid_device *hid)struct usb_host_interface *interface = intf->cur_altsetting;struct usb_device *dev =interface_to_usbdev (intf);struct hid_descriptor *hdesc; +struct hid_class_descriptor *hcdesc;u32 quirks =0 ;unsigned int rsize =0 ;char *rdesc; -int ret, n; -int num_descriptors; -size_t offset = offsetof(struct hid_descriptor , desc); +int ret; quirks =hid_lookup_quirk (hid);
@@ -1009,20 +1008,19 @@ static int usbhid_parse(struct hid_device *hid)return -ENODEV ; } -if (hdesc->bLength <sizeof (struct hid_descriptor )) { -dbg_hid ("hid descriptor is too short\n" ); +if (!hdesc->bNumDescriptors || + hdesc->bLength !=sizeof (*hdesc) + + (hdesc->bNumDescriptors -1 ) *sizeof (*hcdesc)) { +dbg_hid ("hid descriptor invalid, bLen=%hhu bNum=%hhu\n" , + hdesc->bLength, hdesc->bNumDescriptors);return -EINVAL ; } hid->version =le16_to_cpu (hdesc->bcdHID); hid->country = hdesc->bCountryCode; - num_descriptors =min_t (int, hdesc->bNumDescriptors, - (hdesc->bLength - offset) /sizeof (struct hid_class_descriptor )); - -for (n =0 ; n < num_descriptors; n++) -if (hdesc->desc[n].bDescriptorType ==HID_DT_REPORT ) - rsize =le16_to_cpu (hdesc->desc[n].wDescriptorLength); +if (hdesc->rpt_desc.bDescriptorType ==HID_DT_REPORT ) + rsize =le16_to_cpu (hdesc->rpt_desc.wDescriptorLength);if (!rsize || rsize >HID_MAX_DESCRIPTOR_SIZE ) {dbg_hid ("weird size of report descriptor (%u)\n" , rsize);
@@ -1050,6 +1048,11 @@ static int usbhid_parse(struct hid_device *hid) goto err; } +if (hdesc->bNumDescriptors >1 ) +hid_warn (intf, +"%u unsupported optional hid class descriptors\n" , + (int )(hdesc->bNumDescriptors -1 )); + hid->quirks |= quirks;return 0 ;
drivers/hwmon/asus-ec-sensors.c +4 -0
@@ -888,6 +888,10 @@ static int asus_ec_hwmon_read_string(struct device *dev, {struct ec_sensors_data *state =dev_get_drvdata (dev);int sensor_index =find_ec_sensor_index (state, type, channel); + +if (sensor_index <0 ) +return sensor_index; + *str =get_sensor_info (state, sensor_index)->label;return 0 ;
drivers/hwtracing/coresight/coresight-config.h +1 -1
@@ -228,7 +228,7 @@ struct cscfg_feature_csdev {* @feats_csdev:references to the device features to enable. */ struct cscfg_config_csdev { -const struct cscfg_config_desc *config_desc; +struct cscfg_config_desc *config_desc;struct coresight_device *csdev;bool enabled;struct list_head node;
drivers/hwtracing/coresight/coresight-syscfg.c +34 -15
79 lines not on this page · raw message
drivers/iio/filter/admv8818.c +170 -54
224 lines not on this page · raw message
drivers/infiniband/hw/hns/hns_roce_ah.c +0 -1
Lines of this file are not shown. View the raw message.
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +0 -1
Lines of this file are not shown. View the raw message.
drivers/infiniband/hw/hns/hns_roce_hw_v2.h +1 -0
Lines of this file are not shown. View the raw message.
drivers/infiniband/hw/hns/hns_roce_main.c +0 -1
Lines of this file are not shown. View the raw message.
drivers/infiniband/hw/hns/hns_roce_restrack.c +0 -1
Lines of this file are not shown. View the raw message.
drivers/input/rmi4/rmi_f34.c +76 -59
135 lines not on this page · raw message
drivers/md/dm-flakey.c +36 -34
70 lines not on this page · raw message
drivers/net/ethernet/google/gve/gve_main.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/google/gve/gve_tx_dqo.c +3 -0
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +7 -4
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/intel/ice/ice_main.c +33 -14
47 lines not on this page · raw message
drivers/net/ethernet/intel/ice/ice_sched.c +148 -33
181 lines not on this page · raw message
drivers/net/ethernet/marvell/octeontx2/nic/qos.c +1 -3
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/mediatek/mtk_star_emac.c +4 -0
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/mellanox/mlx4/en_clock.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +6 -6
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +13 -8
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +4 -1
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/microchip/lan743x_main.c +2 -2
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/microchip/lan966x/lan966x_main.c +7 -0
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/microchip/lan966x/lan966x_main.h +6 -0
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/microchip/lan966x/lan966x_ptp.c +36 -13
49 lines not on this page · raw message
drivers/net/ethernet/microchip/lan966x/lan966x_switchdev.c +1 -0
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/microchip/lan966x/lan966x_vlan.c +21 -0
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +5 -0
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +9 -2
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/wireless/ath/ath11k/core.c +22 -15
Lines of this file are not shown. View the raw message.
drivers/net/wireless/ath/ath11k/debugfs.c +27 -35
62 lines not on this page · raw message
drivers/net/wireless/ath/ath12k/dp_rx.c +9 -0
Lines of this file are not shown. View the raw message.
drivers/net/wireless/ath/ath9k/htc_drv_beacon.c +3 -0
Lines of this file are not shown. View the raw message.
drivers/net/wireless/mediatek/mt76/mt7915/mmio.c +6 -0
Lines of this file are not shown. View the raw message.
drivers/net/wireless/mediatek/mt76/mt7996/dma.c +2 -2
Lines of this file are not shown. View the raw message.
drivers/net/wireless/mediatek/mt76/mt7996/init.c +3 -0
Lines of this file are not shown. View the raw message.
drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h +3 -0
Lines of this file are not shown. View the raw message.
drivers/net/wireless/realtek/rtw88/coex.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/wireless/realtek/rtw88/rtw8822c.c +2 -1
Lines of this file are not shown. View the raw message.
drivers/net/wireless/realtek/rtw88/sdio.c +2 -8
Lines of this file are not shown. View the raw message.
drivers/pci/controller/cadence/pcie-cadence-host.c +1 -10
Lines of this file are not shown. View the raw message.
drivers/perf/amlogic/meson_ddr_pmu_core.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/phy/qualcomm/phy-qcom-qmp-usb.c +5 -1
Lines of this file are not shown. View the raw message.
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c +8 -6
Lines of this file are not shown. View the raw message.
drivers/remoteproc/ti_k3_r5_remoteproc.c +0 -8
Lines of this file are not shown. View the raw message.
drivers/tty/serial/sh-sci.c +63 -18
81 lines not on this page · raw message
drivers/usb/renesas_usbhs/common.c +38 -12
50 lines not on this page · raw message
drivers/usb/typec/tcpm/tcpci_maxim_core.c +2 -1
Lines of this file are not shown. View the raw message.
drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c +66 -13
79 lines not on this page · raw message
drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h +12 -2
Lines of this file are not shown. View the raw message.
kernel/events/core.c +38 -12
50 lines not on this page · raw message
kernel/trace/trace_events_hist.c +106 -16
122 lines not on this page · raw message
net/bluetooth/mgmt.c +61 -79
140 lines not on this page · raw message
net/bluetooth/mgmt_util.c +27 -22
49 lines not on this page · raw message
net/bridge/netfilter/nf_conntrack_bridge.c +6 -6
Lines of this file are not shown. View the raw message.
net/core/skmsg.c +33 -20
53 lines not on this page · raw message
scripts/gcc-plugins/randomize_layout_plugin.c +12 -28
Lines of this file are not shown. View the raw message.
tools/arch/x86/kcpuid/kcpuid.c +23 -24
47 lines not on this page · raw message
tools/perf/scripts/python/exported-sql-viewer.py +4 -1
Lines of this file are not shown. View the raw message.
tools/perf/util/intel-pt.c +202 -3
205 lines not on this page · raw message
tools/testing/selftests/bpf/prog_tests/bpf_nf.c +6 -0
Lines of this file are not shown. View the raw message.
tools/testing/selftests/seccomp/seccomp_bpf.c +5 -2
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Part of the diff is not shown here. View the raw message.