arm: Remove ib62x0 board
Subsystems (2)
PATCH 1/1 arm: Remove ib62x0 board
This board is unmaintained. Remove it.
---
Cc: Stefan Roese <[email protected]>
Cc: Tony Dinh <[email protected]>
Cc: Luka Perkov <[email protected]>
--- arch/arm/mach-kirkwood/Kconfig | 7 -- board/raidsonic/ib62x0/Kconfig | 12 --- board/raidsonic/ib62x0/MAINTAINERS | 6 -- board/raidsonic/ib62x0/Makefile | 7 -- board/raidsonic/ib62x0/ib62x0.c | 68 ------------- board/raidsonic/ib62x0/ib62x0.h | 29 ------ board/raidsonic/ib62x0/kwbimage.cfg | 153 ---------------------------- configs/ib62x0_defconfig | 63 ------------ include/configs/ib62x0.h | 34 ------- 9 files changed, 379 deletions(-) delete mode 100644 board/raidsonic/ib62x0/Kconfig delete mode 100644 board/raidsonic/ib62x0/MAINTAINERS delete mode 100644 board/raidsonic/ib62x0/Makefile delete mode 100644 board/raidsonic/ib62x0/ib62x0.c delete mode 100644 board/raidsonic/ib62x0/ib62x0.h delete mode 100644 board/raidsonic/ib62x0/kwbimage.cfg delete mode 100644 configs/ib62x0_defconfig delete mode 100644 include/configs/ib62x0.h
arch/arm/mach-kirkwood/Kconfig +0 -7
@@ -113,12 +113,6 @@ config TARGET_NETSPACE_V2 select FEROCEON_88FR131 select KIRKWOOD_COMMON -config TARGET_IB62X0 - bool "ib62x0 Board" - select FEROCEON_88FR131 - select KW88F6281 - select KIRKWOOD_COMMON - config TARGET_DOCKSTAR bool "Dockstar Board" select FEROCEON_88FR131
@@ -190,7 +184,6 @@ source "board/d-link/dns325/Kconfig" source "board/iomega/iconnect/Kconfig" source "board/LaCie/net2big_v2/Kconfig" source "board/LaCie/netspace_v2/Kconfig" -source "board/raidsonic/ib62x0/Kconfig" source "board/Seagate/dockstar/Kconfig" source "board/Seagate/goflexhome/Kconfig" source "board/Seagate/nas220/Kconfig"
board/raidsonic/ib62x0/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_IB62X0 - -config SYS_BOARD - default "ib62x0" - -config SYS_VENDOR - default "raidsonic" - -config SYS_CONFIG_NAME - default "ib62x0" - -endif
board/raidsonic/ib62x0/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -IB62X0 BOARD -M: Luka Perkov <[email protected]> -S: Maintained -F: board/raidsonic/ib62x0/ -F: include/configs/ib62x0.h -F: configs/ib62x0_defconfig
board/raidsonic/ib62x0/Makefile deleted +0 -7
@@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <[email protected]> - -obj-y := ib62x0.o
board/raidsonic/ib62x0/ib62x0.c deleted +0 -68
68 lines not on this page · raw message
board/raidsonic/ib62x0/ib62x0.h deleted +0 -29
@@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2011-2012 -* Gerald Kerma <[email protected]> -* Simon Baatz <[email protected]> -* Luka Perkov <[email protected]> -*/ - -#ifndef __IB62x0_H -#define __IB62x0_H - -#define IB62x0_OE_LOW (~(1 << 22 | 1 << 24 | 1 << 25 | 1 << 27)) -#define IB62x0_OE_HIGH (~(0)) -#define IB62x0_OE_VAL_LOW 0 -#define IB62x0_OE_VAL_HIGH 0 - -/* PHY related */ -#define MV88E1116_LED_FCTRL_REG 10 -#define MV88E1116_CPRSP_CR3_REG 21 -#define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) - -/* SATAHC related */ -#define MVSATAHC_LED_CONF_REG (MV_SATA_BASE + 0x2C) -#define MVSATAHC_LED_POLARITY_CTRL (1 << 3) - -#endif /* __IB62x0_H */
board/raidsonic/ib62x0/kwbimage.cfg deleted +0 -153
153 lines not on this page · raw message
configs/ib62x0_defconfig deleted +0 -63
63 lines not on this page · raw message
include/configs/ib62x0.h deleted +0 -34
@@ -1,34 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2011-2012 -* Gerald Kerma <[email protected]> -* Luka Perkov <[email protected]> -*/ - -#ifndef _CONFIG_IB62x0_H -#define _CONFIG_IB62x0_H - -#include "mv-common.h" - -/* -* Environment variables configuration -*/ - -/* -* Default environment variables -*/ - -#define CFG_EXTRA_ENV_SETTINGS \ - "console=console=ttyS0,115200\0" \ - "kernel=/boot/zImage\0" \ - "fdt=/boot/ib62x0.dtb\0" \ - "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0" - -/* -* SATA driver configuration -*/ -#ifdef CONFIG_IDE -#define __io -#endif /* CONFIG_IDE */ - -#endif /* _CONFIG_IB62x0_H */
Signature · 1 line
2.43.0
Hi Tom,
Quoted 474 lines · Tom Rini
This board is unmaintained. Remove it.
Signed-off-by Tom Rini <[email protected]>---
Cc: Stefan Roese <[email protected]>
Cc: Tony Dinh <[email protected]>
Cc: Luka Perkov <[email protected]>--- arch/arm/mach-kirkwood/Kconfig | 7 -- board/raidsonic/ib62x0/Kconfig | 12 --- board/raidsonic/ib62x0/MAINTAINERS | 6 -- board/raidsonic/ib62x0/Makefile | 7 -- board/raidsonic/ib62x0/ib62x0.c | 68 ------------- board/raidsonic/ib62x0/ib62x0.h | 29 ------ board/raidsonic/ib62x0/kwbimage.cfg | 153 ---------------------------- configs/ib62x0_defconfig | 63 ------------ include/configs/ib62x0.h | 34 ------- 9 files changed, 379 deletions(-) delete mode 100644 board/raidsonic/ib62x0/Kconfig delete mode 100644 board/raidsonic/ib62x0/MAINTAINERS delete mode 100644 board/raidsonic/ib62x0/Makefile delete mode 100644 board/raidsonic/ib62x0/ib62x0.c delete mode 100644 board/raidsonic/ib62x0/ib62x0.h delete mode 100644 board/raidsonic/ib62x0/kwbimage.cfg delete mode 100644 configs/ib62x0_defconfig delete mode 100644 include/configs/ib62x0.harch/arm/mach-kirkwood/Kconfig +0
-7@@ -113,12 +113,6 @@ config TARGET_NETSPACE_V2 select FEROCEON_88FR131 select KIRKWOOD_COMMON -config TARGET_IB62X0 - bool "ib62x0 Board" - select FEROCEON_88FR131 - select KW88F6281 - select KIRKWOOD_COMMON - config TARGET_DOCKSTAR bool "Dockstar Board" select FEROCEON_88FR131@@ -190,7 +184,6 @@ source "board/d-link/dns325/Kconfig" source "board/iomega/iconnect/Kconfig" source "board/LaCie/net2big_v2/Kconfig" source "board/LaCie/netspace_v2/Kconfig" -source "board/raidsonic/ib62x0/Kconfig" source "board/Seagate/dockstar/Kconfig" source "board/Seagate/goflexhome/Kconfig" source "board/Seagate/nas220/Kconfig"board/raidsonic/ib62x0/Kconfig deleted +0
-12@@ -1,12 +0,0 @@ -if TARGET_IB62X0 - -config SYS_BOARD - default "ib62x0" - -config SYS_VENDOR - default "raidsonic" - -config SYS_CONFIG_NAME - default "ib62x0" - -endifboard/raidsonic/ib62x0/MAINTAINERS deleted +0
-6@@ -1,6 +0,0 @@ -IB62X0 BOARD -M: Luka Perkov <[email protected]> -S: Maintained -F: board/raidsonic/ib62x0/ -F: include/configs/ib62x0.h -F: configs/ib62x0_defconfigboard/raidsonic/ib62x0/Makefile deleted +0
-7@@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <[email protected]> - -obj-y := ib62x0.oboard/raidsonic/ib62x0/ib62x0.c deleted +0
-68@@ -1,68 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* -* Copyright (C) 2011-2012 -* Gerald Kerma <[email protected]> -* Luka Perkov <[email protected]> -* Simon Baatz <[email protected]> -*/ - -#include <init.h> -#include <miiphy.h> -#include <asm/global_data.h> -#include <asm/io.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> -#include "ib62x0.h" - -DECLARE_GLOBAL_DATA_PTR ; - -int board_early_init_f (void ) -{ -/* -* default gpio configuration -* There are maximum 64 gpios controlled through 2 sets of registers -* the below configuration configures mainly initial LED status -*/ -mvebu_config_gpio (IB62x0_OE_VAL_LOW, - IB62x0_OE_VAL_HIGH, - IB62x0_OE_LOW, IB62x0_OE_HIGH); - -/* Set SATA activity LEDs to default off */ -writel (MVSATAHC_LED_POLARITY_CTRL ,MVSATAHC_LED_CONF_REG ); -/* Multi-Purpose Pins Functionality configuration */ -static const u32 kwmpp_config[] = { -MPP0_NF_IO2 , -MPP1_NF_IO3 , -MPP2_NF_IO4 , -MPP3_NF_IO5 , -MPP4_NF_IO6 , -MPP5_NF_IO7 , - MPP6_SYSRST_OUTn, -MPP8_TW_SDA , -MPP9_TW_SCK , -MPP10_UART0_TXD , -MPP11_UART0_RXD , -MPP18_NF_IO0 , -MPP19_NF_IO1 , - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, -MPP22_GPIO ,/* Power LED red */ -MPP24_GPIO ,/* Power off device */ -MPP25_GPIO ,/* Power LED green */ -MPP27_GPIO ,/* USB transfer LED */ -MPP28_GPIO ,/* Reset button */ -MPP29_GPIO ,/* USB Copy button */ -0 - }; -kirkwood_mpp_conf (kwmpp_config,NULL ); -return 0 ; -} - -int board_init (void ) -{ -/* adress of boot parameters */ - gd->bd->bi_boot_params =mvebu_sdram_bar (0 ) +0x100 ; - -return 0 ; -}board/raidsonic/ib62x0/ib62x0.h deleted +0
-29@@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2011-2012 -* Gerald Kerma <[email protected]> -* Simon Baatz <[email protected]> -* Luka Perkov <[email protected]> -*/ - -#ifndef __IB62x0_H -#define __IB62x0_H - -#define IB62x0_OE_LOW (~(1 << 22 | 1 << 24 | 1 << 25 | 1 << 27)) -#define IB62x0_OE_HIGH (~(0)) -#define IB62x0_OE_VAL_LOW 0 -#define IB62x0_OE_VAL_HIGH 0 - -/* PHY related */ -#define MV88E1116_LED_FCTRL_REG 10 -#define MV88E1116_CPRSP_CR3_REG 21 -#define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) - -/* SATAHC related */ -#define MVSATAHC_LED_CONF_REG (MV_SATA_BASE + 0x2C) -#define MVSATAHC_LED_POLARITY_CTRL (1 << 3) - -#endif /* __IB62x0_H */ board/raidsonic/ib62x0/kwbimage.cfg deleted +0
-153@@ -1,153 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011-2012 -# Gerald Kerma <[email protected]> -# Simon Baatz <[email protected]> -# Luka Perkov <[email protected]> -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM nand -NAND_ECC_MODE default -NAND_PAGE_SIZE 0x0800 - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xffd100e0 0x1b1b1b9b - -# Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xffd01400 0x43000c30 # DDR Configuration register -# bit13-0: 0xc30, (3120 DDR2 clks refresh rate) -# bit23-14: 0x0, -# bit24: 0x1, enable exit self refresh mode on DDR access -# bit25: 0x1, required -# bit29-26: 0x0, -# bit31-30: 0x1, - -DATA 0xffd01404 0x37543000 # DDR Controller Control Low -# bit4: 0x0, addr/cmd in smame cycle -# bit5: 0x0, clk is driven during self refresh, we don't care for APX -# bit6: 0x0, use recommended falling edge of clk for addr/cmd -# bit14: 0x0, input buffer always powered up -# bit18: 0x1, cpu lock transaction enabled -# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 0x3, required -# bit31: 0x0, no additional STARTBURST delay - -DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1) -# bit3-0: TRAS lsbs -# bit7-4: TRCD -# bit11-8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xffd0140c 0x00000a33 # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: 0x0, required - -DATA 0xffd01410 0x0000000c # DDR Address Control -# bit1-0: 00, Cs0width (x8) -# bit3-2: 11, Cs0size (1Gb) -# bit5-4: 00, Cs1width (x8) -# bit7-6: 11, Cs1size (1Gb) -# bit9-8: 00, Cs2width (nonexistent) -# bit11-10: 00, Cs2size (nonexistent) -# bit13-12: 00, Cs3width (nonexistent) -# bit15-14: 00, Cs3size (nonexistent) -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0x0, required - -DATA 0xffd01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0x0, required - -DATA 0xffd01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0x0, required - -DATA 0xffd0141c 0x00000c52 # DDR Mode -# bit2-0: 0x2, BurstLen=2 required -# bit3: 0x0, BurstType=0 required -# bit6-4: 0x4, CL=5 -# bit7: 0x0, TestMode=0 normal -# bit8: 0x0, DLL reset=0 normal -# bit11-9: 0x6, auto-precharge write recovery -# bit12: 0x0, PD must be zero -# bit31-13: 0x0, required - -DATA 0xffd01420 0x00000040 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 0, DDR drive strenght normal -# bit2: 1, DDR ODT control lsd (disabled) -# bit5-3: 0x0, required -# bit6: 0, DDR ODT control msb, (disabled) -# bit9-7: 0x0, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0x0, required - -DATA 0xffd01424 0x0000f17f # DDR Controller Control High -# bit2-0: 0x7, required -# bit3: 0x1, MBUS Burst Chop disabled -# bit6-4: 0x7, required -# bit7: 0x0, -# bit8: 0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz -# bit9: 0x0, no half clock cycle addition to dataout -# bit10: 0x0, 1/4 clock cycle skew enabled for addr/ctl signals -# bit11: 0x0, 1/4 clock cycle skew disabled for write mesh -# bit15-12: 0xf, required -# bit31-16: 0, required - -DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values) -DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values) - -DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xffd01504 0x0ffffff1 # CS[0]n Size -# bit0: 0x1, Window enabled -# bit1: 0x0, Write Protect disabled -# bit3-2: 0x0, CS0 hit selected -# bit23-4: 0xfffff, required -# bit31-24: 0x0f, Size (i.e. 256MB) - -DATA 0xffd01508 0x10000000 # CS[1]n Base address to 256Mb -DATA 0xffd0150c 0x00000000 # CS[1]n Size, window disabled - -DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled - -DATA 0xffd01494 0x00030000 # DDR ODT Control (Low) -# bit3-0: ODT0Rd, MODT[0] asserted during read from DRAM CS1 -# bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0 -# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1 -# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 - -DATA 0xffd01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 0x0, ODT0 controlled by ODT Control (low) register above -# bit3-2: 0x1, ODT1 active NEVER! -# bit31-4: 0x0, required - -DATA 0xffd0149c 0x0000e803 # CPU ODT Control -DATA 0xffd01480 0x00000001 # DDR Initialization Control -# bit0: 0x1, enable DDR init upon this register write - -DATA 0xffd20134 0x66666666 # L2 RAM Timing 0 Register -DATA 0xffd20138 0x66666666 # L2 RAM Timing 1 Register - -# End of Header extension -DATA 0x0 0x0configs/ib62x0_defconfig deleted +0
-63@@ -1,63 +0,0 @@ -CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_KWD_CONFIG="board/raidsonic/ib62x0/kwbimage.cfg" -CONFIG_TEXT_BASE=0x600000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 -CONFIG_TARGET_IB62X0=y -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_OFFSET=0xE0000 -CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-ib62x0" -CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_IDENT_STRING=" RaidSonic ICY BOX IB-NAS62x0" -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:rootfs; ubifsload 0x800000 ${kernel}; ubifsload 0x700000 ${fdt}; ubifsumount; fdt addr 0x700000; fdt resize; fdt chosen; bootz 0x800000 - 0x700000" -CONFIG_USE_PREBOOT=y -CONFIG_SYS_PBSIZE=1051 -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="ib62x0 => " -CONFIG_SYS_MAXARGS=32 -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_IDE=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" -CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xe0000@0x0(uboot),0x20000@0xe0000(uboot_env),-@0x100000(root)" -CONFIG_CMD_UBI=y -CONFIG_ISO_PARTITION=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NETCONSOLE=y -CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y -CONFIG_SYS_ATA_STRIDE=4 -CONFIG_SYS_ATA_DATA_OFFSET=0x100 -CONFIG_SYS_ATA_REG_OFFSET=0x100 -CONFIG_SYS_ATA_ALT_OFFSET=0x100 -CONFIG_SYS_ATA_IDE0_OFFSET=0x2000 -CONFIG_SYS_ATA_IDE1_OFFSET=0x4000 -CONFIG_LBA48=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_LZMA=y -CONFIG_BZIP2=yinclude/configs/ib62x0.h deleted +0
-35@@ -1,34 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2011-2012 -* Gerald Kerma <[email protected]> -* Luka Perkov <[email protected]> -*/ - -#ifndef _CONFIG_IB62x0_H -#define _CONFIG_IB62x0_H - -#include "mv-common.h" - -/* -* Environment variables configuration -*/ - -/* -* Default environment variables -*/ - -#define CFG_EXTRA_ENV_SETTINGS \ - "console=console=ttyS0,115200\0" \ - "kernel=/boot/zImage\0" \ - "fdt=/boot/ib62x0.dtb\0" \ - "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0" - -/* -* SATA driver configuration -*/ -#ifdef CONFIG_IDE -#define __io -#endif /* CONFIG_IDE */ - -#endif /* _CONFIG_IB62x0_H */ --
Quoted 2 lines
2.43.0
Please keep this. Even though I don't have this board, we can use the Marvell Dreamplug as the surrogate for testing just fine. I'll send in patches to modernize it and remove JFFS2.
All the best,
Tony
Quoted 475 lines · Tony Dinh
Hi Tom,
Quoted 472 lines · Tom Rini
This board is unmaintained. Remove it.
Signed-off-by Tom Rini <[email protected]>---
Cc: Stefan Roese <[email protected]>
Cc: Tony Dinh <[email protected]>
Cc: Luka Perkov <[email protected]>--- arch/arm/mach-kirkwood/Kconfig | 7 -- board/raidsonic/ib62x0/Kconfig | 12 --- board/raidsonic/ib62x0/MAINTAINERS | 6 -- board/raidsonic/ib62x0/Makefile | 7 -- board/raidsonic/ib62x0/ib62x0.c | 68 ------------- board/raidsonic/ib62x0/ib62x0.h | 29 ------ board/raidsonic/ib62x0/kwbimage.cfg | 153 ---------------------------- configs/ib62x0_defconfig | 63 ------------ include/configs/ib62x0.h | 34 ------- 9 files changed, 379 deletions(-) delete mode 100644 board/raidsonic/ib62x0/Kconfig delete mode 100644 board/raidsonic/ib62x0/MAINTAINERS delete mode 100644 board/raidsonic/ib62x0/Makefile delete mode 100644 board/raidsonic/ib62x0/ib62x0.c delete mode 100644 board/raidsonic/ib62x0/ib62x0.h delete mode 100644 board/raidsonic/ib62x0/kwbimage.cfg delete mode 100644 configs/ib62x0_defconfig delete mode 100644 include/configs/ib62x0.harch/arm/mach-kirkwood/Kconfig +0
-7@@ -113,12 +113,6 @@ config TARGET_NETSPACE_V2 select FEROCEON_88FR131 select KIRKWOOD_COMMON -config TARGET_IB62X0 - bool "ib62x0 Board" - select FEROCEON_88FR131 - select KW88F6281 - select KIRKWOOD_COMMON - config TARGET_DOCKSTAR bool "Dockstar Board" select FEROCEON_88FR131@@ -190,7 +184,6 @@ source "board/d-link/dns325/Kconfig" source "board/iomega/iconnect/Kconfig" source "board/LaCie/net2big_v2/Kconfig" source "board/LaCie/netspace_v2/Kconfig" -source "board/raidsonic/ib62x0/Kconfig" source "board/Seagate/dockstar/Kconfig" source "board/Seagate/goflexhome/Kconfig" source "board/Seagate/nas220/Kconfig"board/raidsonic/ib62x0/Kconfig deleted +0
-12@@ -1,12 +0,0 @@ -if TARGET_IB62X0 - -config SYS_BOARD - default "ib62x0" - -config SYS_VENDOR - default "raidsonic" - -config SYS_CONFIG_NAME - default "ib62x0" - -endifboard/raidsonic/ib62x0/MAINTAINERS deleted +0
-6@@ -1,6 +0,0 @@ -IB62X0 BOARD -M: Luka Perkov <[email protected]> -S: Maintained -F: board/raidsonic/ib62x0/ -F: include/configs/ib62x0.h -F: configs/ib62x0_defconfigboard/raidsonic/ib62x0/Makefile deleted +0
-7@@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <[email protected]> - -obj-y := ib62x0.oboard/raidsonic/ib62x0/ib62x0.c deleted +0
-68@@ -1,68 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* -* Copyright (C) 2011-2012 -* Gerald Kerma <[email protected]> -* Luka Perkov <[email protected]> -* Simon Baatz <[email protected]> -*/ - -#include <init.h> -#include <miiphy.h> -#include <asm/global_data.h> -#include <asm/io.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> -#include "ib62x0.h" - -DECLARE_GLOBAL_DATA_PTR ; - -int board_early_init_f (void ) -{ -/* -* default gpio configuration -* There are maximum 64 gpios controlled through 2 sets of registers -* the below configuration configures mainly initial LED status -*/ -mvebu_config_gpio (IB62x0_OE_VAL_LOW, - IB62x0_OE_VAL_HIGH, - IB62x0_OE_LOW, IB62x0_OE_HIGH); - -/* Set SATA activity LEDs to default off */ -writel (MVSATAHC_LED_POLARITY_CTRL ,MVSATAHC_LED_CONF_REG ); -/* Multi-Purpose Pins Functionality configuration */ -static const u32 kwmpp_config[] = { -MPP0_NF_IO2 , -MPP1_NF_IO3 , -MPP2_NF_IO4 , -MPP3_NF_IO5 , -MPP4_NF_IO6 , -MPP5_NF_IO7 , - MPP6_SYSRST_OUTn, -MPP8_TW_SDA , -MPP9_TW_SCK , -MPP10_UART0_TXD , -MPP11_UART0_RXD , -MPP18_NF_IO0 , -MPP19_NF_IO1 , - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, -MPP22_GPIO ,/* Power LED red */ -MPP24_GPIO ,/* Power off device */ -MPP25_GPIO ,/* Power LED green */ -MPP27_GPIO ,/* USB transfer LED */ -MPP28_GPIO ,/* Reset button */ -MPP29_GPIO ,/* USB Copy button */ -0 - }; -kirkwood_mpp_conf (kwmpp_config,NULL ); -return 0 ; -} - -int board_init (void ) -{ -/* adress of boot parameters */ - gd->bd->bi_boot_params =mvebu_sdram_bar (0 ) +0x100 ; - -return 0 ; -}board/raidsonic/ib62x0/ib62x0.h deleted +0
-29@@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2011-2012 -* Gerald Kerma <[email protected]> -* Simon Baatz <[email protected]> -* Luka Perkov <[email protected]> -*/ - -#ifndef __IB62x0_H -#define __IB62x0_H - -#define IB62x0_OE_LOW (~(1 << 22 | 1 << 24 | 1 << 25 | 1 << 27)) -#define IB62x0_OE_HIGH (~(0)) -#define IB62x0_OE_VAL_LOW 0 -#define IB62x0_OE_VAL_HIGH 0 - -/* PHY related */ -#define MV88E1116_LED_FCTRL_REG 10 -#define MV88E1116_CPRSP_CR3_REG 21 -#define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) - -/* SATAHC related */ -#define MVSATAHC_LED_CONF_REG (MV_SATA_BASE + 0x2C) -#define MVSATAHC_LED_POLARITY_CTRL (1 << 3) - -#endif /* __IB62x0_H */ board/raidsonic/ib62x0/kwbimage.cfg deleted +0
-153@@ -1,153 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011-2012 -# Gerald Kerma <[email protected]> -# Simon Baatz <[email protected]> -# Luka Perkov <[email protected]> -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM nand -NAND_ECC_MODE default -NAND_PAGE_SIZE 0x0800 - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xffd100e0 0x1b1b1b9b - -# Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xffd01400 0x43000c30 # DDR Configuration register -# bit13-0: 0xc30, (3120 DDR2 clks refresh rate) -# bit23-14: 0x0, -# bit24: 0x1, enable exit self refresh mode on DDR access -# bit25: 0x1, required -# bit29-26: 0x0, -# bit31-30: 0x1, - -DATA 0xffd01404 0x37543000 # DDR Controller Control Low -# bit4: 0x0, addr/cmd in smame cycle -# bit5: 0x0, clk is driven during self refresh, we don't care for APX -# bit6: 0x0, use recommended falling edge of clk for addr/cmd -# bit14: 0x0, input buffer always powered up -# bit18: 0x1, cpu lock transaction enabled -# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 0x3, required -# bit31: 0x0, no additional STARTBURST delay - -DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1) -# bit3-0: TRAS lsbs -# bit7-4: TRCD -# bit11-8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xffd0140c 0x00000a33 # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: 0x0, required - -DATA 0xffd01410 0x0000000c # DDR Address Control -# bit1-0: 00, Cs0width (x8) -# bit3-2: 11, Cs0size (1Gb) -# bit5-4: 00, Cs1width (x8) -# bit7-6: 11, Cs1size (1Gb) -# bit9-8: 00, Cs2width (nonexistent) -# bit11-10: 00, Cs2size (nonexistent) -# bit13-12: 00, Cs3width (nonexistent) -# bit15-14: 00, Cs3size (nonexistent) -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0x0, required - -DATA 0xffd01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0x0, required - -DATA 0xffd01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0x0, required - -DATA 0xffd0141c 0x00000c52 # DDR Mode -# bit2-0: 0x2, BurstLen=2 required -# bit3: 0x0, BurstType=0 required -# bit6-4: 0x4, CL=5 -# bit7: 0x0, TestMode=0 normal -# bit8: 0x0, DLL reset=0 normal -# bit11-9: 0x6, auto-precharge write recovery -# bit12: 0x0, PD must be zero -# bit31-13: 0x0, required - -DATA 0xffd01420 0x00000040 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 0, DDR drive strenght normal -# bit2: 1, DDR ODT control lsd (disabled) -# bit5-3: 0x0, required -# bit6: 0, DDR ODT control msb, (disabled) -# bit9-7: 0x0, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0x0, required - -DATA 0xffd01424 0x0000f17f # DDR Controller Control High -# bit2-0: 0x7, required -# bit3: 0x1, MBUS Burst Chop disabled -# bit6-4: 0x7, required -# bit7: 0x0, -# bit8: 0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz -# bit9: 0x0, no half clock cycle addition to dataout -# bit10: 0x0, 1/4 clock cycle skew enabled for addr/ctl signals -# bit11: 0x0, 1/4 clock cycle skew disabled for write mesh -# bit15-12: 0xf, required -# bit31-16: 0, required - -DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values) -DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values) - -DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xffd01504 0x0ffffff1 # CS[0]n Size -# bit0: 0x1, Window enabled -# bit1: 0x0, Write Protect disabled -# bit3-2: 0x0, CS0 hit selected -# bit23-4: 0xfffff, required -# bit31-24: 0x0f, Size (i.e. 256MB) - -DATA 0xffd01508 0x10000000 # CS[1]n Base address to 256Mb -DATA 0xffd0150c 0x00000000 # CS[1]n Size, window disabled - -DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled - -DATA 0xffd01494 0x00030000 # DDR ODT Control (Low) -# bit3-0: ODT0Rd, MODT[0] asserted during read from DRAM CS1 -# bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0 -# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1 -# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 - -DATA 0xffd01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 0x0, ODT0 controlled by ODT Control (low) register above -# bit3-2: 0x1, ODT1 active NEVER! -# bit31-4: 0x0, required - -DATA 0xffd0149c 0x0000e803 # CPU ODT Control -DATA 0xffd01480 0x00000001 # DDR Initialization Control -# bit0: 0x1, enable DDR init upon this register write - -DATA 0xffd20134 0x66666666 # L2 RAM Timing 0 Register -DATA 0xffd20138 0x66666666 # L2 RAM Timing 1 Register - -# End of Header extension -DATA 0x0 0x0configs/ib62x0_defconfig deleted +0
-63@@ -1,63 +0,0 @@ -CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_KWD_CONFIG="board/raidsonic/ib62x0/kwbimage.cfg" -CONFIG_TEXT_BASE=0x600000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 -CONFIG_TARGET_IB62X0=y -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_OFFSET=0xE0000 -CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-ib62x0" -CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_IDENT_STRING=" RaidSonic ICY BOX IB-NAS62x0" -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:rootfs; ubifsload 0x800000 ${kernel}; ubifsload 0x700000 ${fdt}; ubifsumount; fdt addr 0x700000; fdt resize; fdt chosen; bootz 0x800000 - 0x700000" -CONFIG_USE_PREBOOT=y -CONFIG_SYS_PBSIZE=1051 -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="ib62x0 => " -CONFIG_SYS_MAXARGS=32 -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_IDE=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" -CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xe0000@0x0(uboot),0x20000@0xe0000(uboot_env),-@0x100000(root)" -CONFIG_CMD_UBI=y -CONFIG_ISO_PARTITION=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NETCONSOLE=y -CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y -CONFIG_SYS_ATA_STRIDE=4 -CONFIG_SYS_ATA_DATA_OFFSET=0x100 -CONFIG_SYS_ATA_REG_OFFSET=0x100 -CONFIG_SYS_ATA_ALT_OFFSET=0x100 -CONFIG_SYS_ATA_IDE0_OFFSET=0x2000 -CONFIG_SYS_ATA_IDE1_OFFSET=0x4000 -CONFIG_LBA48=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_LZMA=y -CONFIG_BZIP2=yinclude/configs/ib62x0.h deleted +0
-33@@ -1,34 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2011-2012 -* Gerald Kerma <[email protected]> -* Luka Perkov <[email protected]> -*/ - -#ifndef _CONFIG_IB62x0_H -#define _CONFIG_IB62x0_H - -#include "mv-common.h" - -/* -* Environment variables configuration -*/ - -/* -* Default environment variables -*/ - -#define CFG_EXTRA_ENV_SETTINGS \ - "console=console=ttyS0,115200\0" \ - "kernel=/boot/zImage\0" \ - "fdt=/boot/ib62x0.dtb\0" \ - "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0" - -/* -* SATA driver configuration -*/ -#ifdef CONFIG_IDE -#define __io -#endif /* CONFIG_IDE */ -
Quoted 8 lines
Quoted 4 lines
include/configs/ib62x0.h deleted +0
-2-#endif /* _CONFIG_IB62x0_H */ --2.43.0
Please keep this. Even though I don't have this board, we can use the Marvell Dreamplug as the surrogate for testing just fine. I'll send in patches to modernize it and remove JFFS2.
I thought you might say that Tony, thanks! Just send a patch for MAINTAINERS for now please.
Signature · 1 line
Tom