Skip to contentSkip to conversation

dt-bindings: usb: convert lpc32xx-udc.txt to yaml format

PATCH New Frank Li 1 participant 1 message Jun 23, 2025

Subsystems (4)
lore
Share & tools
lore

Frank Li

author maintainer
#0 lore raw

PATCH 1/1 dt-bindings: usb: convert lpc32xx-udc.txt to yaml format

Convert lpc32xx-udc.txt to yaml format.

---
 .../devicetree/bindings/usb/lpc32xx-udc.txt   | 28 -----------
 .../bindings/usb/nxp,lpc3220-udc.yaml         | 50 +++++++++++++++++++
 2 files changed, 50 insertions(+), 28 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/usb/lpc32xx-udc.txt
 create mode 100644 Documentation/devicetree/bindings/usb/nxp,lpc3220-udc.yaml
Documentation/devicetree/bindings/usb/lpc32xx-udc.txt deleted +0 -28
deleted file mode 100644
index 29f12a533f666..0000000000000
@@ -1,28 +0,0 @@
-* NXP LPC32xx SoC USB Device Controller (UDC)
-
-Required properties:
-- compatible: Must be "nxp,lpc3220-udc"
-- reg: Physical base address of the controller and length of memory mapped
-  region.
-- interrupts: The USB interrupts:
-              * USB Device Low Priority Interrupt
-              * USB Device High Priority Interrupt
-              * USB Device DMA Interrupt
-              * External USB Transceiver Interrupt (OTG ATX)
-- transceiver: phandle of the associated ISP1301 device - this is necessary for
-               the UDC controller for connecting to the USB physical layer
-
-Example:
-
-	isp1301: usb-transceiver@2c {
-		compatible = "nxp,isp1301";
-		reg = <0x2c>;
-	};
-
-	usbd@31020000 {
-		compatible = "nxp,lpc3220-udc";
-		reg = <0x31020000 0x300>;
-		interrupt-parent = <&mic>;
-		interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
-		transceiver = <&isp1301>;
-	};
Documentation/devicetree/bindings/usb/nxp,lpc3220-udc.yaml new file +50 -0

50 lines not on this page · raw message

Signature · 1 line
2.34.1