dt-bindings: phy: Convert ti,da830-usb-phy to DT schema
Subsystems (2)
Rob Herring (Arm)
maintainerPATCH v2 1/1 dt-bindings: phy: Convert ti,da830-usb-phy to DT schema
Convert the TI DA830 USB PHY binding to DT schema format. Add "clocks" and "clock-names" which are already in use. As they are always present, make them required as well.
---
v2:
- Move some description to #phy-cells
- Make clocks/clock-names required
--- .../devicetree/bindings/phy/phy-da8xx-usb.txt | 40 -------------- .../bindings/phy/ti,da830-usb-phy.yaml | 53 +++++++++++++++++++ 2 files changed, 53 insertions(+), 40 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt create mode 100644 Documentation/devicetree/bindings/phy/ti,da830-usb-phy.yaml
Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt deleted +0 -40
@@ -1,40 +0,0 @@ -TI DA8xx/OMAP-L1xx/AM18xx USB PHY - -Required properties: - - compatible: must be "ti,da830-usb-phy". - - #phy-cells: must be 1. - -This device controls the PHY for both the USB 1.1 OHCI and USB 2.0 OTG -controllers on DA8xx SoCs. Consumers of this device should use index 0 for -the USB 2.0 phy device and index 1 for the USB 1.1 phy device. - -It also requires a "syscon" node with compatible = "ti,da830-cfgchip", "syscon" -to access the CFGCHIP2 register. - -Example: - - cfgchip: cfgchip@1417c { - compatible = "ti,da830-cfgchip", "syscon"; - reg = <0x1417c 0x14>; - }; - - usb_phy: usb-phy { - compatible = "ti,da830-usb-phy"; - #phy-cells = <1>; - }; - - usb20: usb@200000 { - compatible = "ti,da830-musb"; - reg = <0x200000 0x1000>; - interrupts = <58>; - phys = <&usb_phy 0>; - phy-names = "usb-phy"; - }; - - usb11: usb@225000 { - compatible = "ti,da830-ohci"; - reg = <0x225000 0x1000>; - interrupts = <59>; - phys = <&usb_phy 1>; - phy-names = "usb-phy"; - };
Documentation/devicetree/bindings/phy/ti,da830-usb-phy.yaml new file +53 -0
53 lines not on this page · raw message
Signature · 1 line
2.47.2
Quoted 6 lines · Rob Herring (Arm)
Convert the TI DA830 USB PHY binding to DT schema format. Add "clocks" and "clock-names" which are already in use. As they are always present, make them required as well.
Signed-off-by Rob Herring (Arm) <[email protected]>---
Signature · 3 lines
linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy
Documentation/devicetree/bindings/phy/ti,da830-usb-phy.yaml line 15
Quoted 12 lines · Rob Herring (Arm)
+$id: http://devicetree.org/schemas/phy/ti,da830-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#Documentation/devicetree/bindings/phy/ti,da830-usb-phy.yaml new file +10
-0+ +title: TI DA8xx/OMAP-L1xx/AM18xx USB PHY + +maintainers: + - David Lechner <[email protected]> + +description: > + This device controls the PHY for both the USB 1.1 OHCI and USB 2.0 OTG + controllers on DA8xx SoCs. +
Trailing white-space here.
Rest looks fine, so with above:
Best regards,
Krzysztof
Quoted 5 lines · Rob Herring (Arm)
Convert the TI DA830 USB PHY binding to DT schema format. Add "clocks" and "clock-names" which are already in use. As they are always present, make them required as well.
Applied, thanks!
[1/1] dt-bindings: phy: Convert ti,da830-usb-phy to DT schema
commit: 99dd7faeb7a4d973f049e1bad234888777e03646
Best regards,
Signature · 1 line
~Vinod