dt-bindings: clock: Convert nuvoton,npcm750-clk to DT schema

deleted file mode 100644
index f82064546d11..000000000000
@@ -1,100 +0,0 @@
-* Nuvoton NPCM7XX Clock Controller
-
-Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which
-generates and supplies clocks to all modules within the BMC.
-
-External clocks:
-
-There are six fixed clocks that are generated outside the BMC. All clocks are of
-a known fixed value that cannot be changed. clk_refclk, clk_mcbypck and
-clk_sysbypck are inputs to the clock controller.
-clk_rg1refck, clk_rg2refck and clk_xin are external clocks suppling the
-network. They are set on the device tree, but not used by the clock module. The
-network devices use them directly.
-Example can be found below.
-
-All available clocks are defined as preprocessor macros in:
-dt-bindings/clock/nuvoton,npcm7xx-clock.h
-and can be reused as DT sources.
-
-Required Properties of clock controller:
-
-	- compatible: "nuvoton,npcm750-clk" : for clock controller of Nuvoton
-		  Poleg BMC NPCM750
-
-	- reg: physical base address of the clock controller and length of
-		memory mapped region.
-
-	- #clock-cells: should be 1.
-
-Example: Clock controller node:
-
-	clk: clock-controller@f0801000 {
-		compatible = "nuvoton,npcm750-clk";
-		#clock-cells = <1>;
-		reg = <0xf0801000 0x1000>;
-		clock-names = "refclk", "sysbypck", "mcbypck";
-		clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
-	};
-
-Example: Required external clocks for network:
-
-	/* external reference clock */
-	clk_refclk: clk-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-		clock-output-names = "refclk";
-	};
-
-	/* external reference clock for cpu. float in normal operation */
-	clk_sysbypck: clk-sysbypck {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <800000000>;
-		clock-output-names = "sysbypck";
-	};
-
-	/* external reference clock for MC. float in normal operation */
-	clk_mcbypck: clk-mcbypck {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <800000000>;
-		clock-output-names = "mcbypck";
-	};
-
-	 /* external clock signal rg1refck, supplied by the phy */
-	clk_rg1refck: clk-rg1refck {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-		clock-output-names = "clk_rg1refck";
-	};
-
-	 /* external clock signal rg2refck, supplied by the phy */
-	clk_rg2refck: clk-rg2refck {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-		clock-output-names = "clk_rg2refck";
-	};
-
-	clk_xin: clk-xin {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-		clock-output-names = "clk_xin";
-	};
-
-
-Example: GMAC controller node that consumes two clocks: a generated clk by the
-clock controller and a fixed clock from DT (clk_rg1refck).
-
-	ethernet0: ethernet@f0802000 {
-		compatible = "snps,dwmac";
-		reg = <0xf0802000 0x2000>;
-		interrupts = <0 14 4>;
-		interrupt-names = "macirq";
-		clocks	= <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
-		clock-names = "stmmaceth", "clk_gmac";
-	};

66 lines not on this page · raw message