accel: Preparatory cleanups for split-accel
Subsystems (2)
v4 cover accel: Preparatory cleanups for split-accel
Missing review: 22-23, 57-59, 63
Since v3:
- Addressed Richard's review comments
Few changes needed before being able to add the
split acceleration:
- few method docstring added
- remove pointless stubs
- propagate soon required AccelState argument
- try to reduce current_accel() uses
- move declarations AccelClass <-> AccelOpsClass
- display model name in 'info cpus'
- add 'info accel' command to QMP/HMP
- make accel_create_vcpu_thread() more generic
- introduce hwaccel_enabled()
I plan to send a PR once fully reviewed.
Regards,
Phil.
Philippe Mathieu-Daudé (65):
system/runstate: Document qemu_add_vm_change_state_handler() system/cpus: Defer memory layout changes until vCPUs are realized system/cpus: Assert interrupt handling is done with BQL locked
accel: Keep reference to AccelOpsClass in AccelClass
accel: Introduce AccelOpsClass::cpu_target_realize() hook accel/hvf: Add hvf_arch_cpu_realize() stubs
accel/kvm: Remove kvm_init_cpu_signals() stub
accel/kvm: Reduce kvm_create_vcpu() declaration scope
accel: Propagate AccelState to AccelClass::init_machine() accel/kvm: Prefer local AccelState over global MachineState::accel accel/hvf: Re-use QOM allocated state
accel/tcg: Prefer local AccelState over global current_accel()
accel: Directly pass AccelState argument to AccelClass::has_memory() accel/kvm: Directly pass KVMState argument to do_kvm_create_vm()
accel: Remove unused MachineState argument of AccelClass::setup_post()
accel: Pass AccelState argument to gdbstub_supported_sstep_flags()
accel: Move supports_guest_debug() declaration to AccelClass
accel: Move cpus_are_resettable() declaration to AccelClass
accel: Move cpu_common_[un]realize() declarations to AccelOpsClass accel/system: Convert pre_resume() from AccelOpsClass to AccelClass hw/core/machine: Display CPU model name in 'info cpus' command
qapi: Move definitions related to accelerators in their own file accel/system: Introduce @x-accel-stats QMP command accel/system: Add 'info accel' on human monitor
accel/tcg: Factor tcg_dump_flush_info() out
accel/tcg: Implement get_[vcpu]_stats()
accel/hvf: Implement get_vcpu_stats()
accel/hvf: Report missing com.apple.security.hypervisor entitlement accel/hvf: Restrict internal declarations
accel/hvf: Move per-cpu method declarations to hvf-accel-ops.c accel/hvf: Move generic method declarations to hvf-all.c
cpus: Document CPUState::vcpu_dirty field
accel/hvf: Replace @dirty field by generic CPUState::vcpu_dirty field accel/nvmm: Replace @dirty field by generic CPUState::vcpu_dirty field accel/whpx: Replace @dirty field by generic CPUState::vcpu_dirty field accel/kvm: Remove kvm_cpu_synchronize_state() stub accel/system: Document cpu_synchronize_state() accel/system: Document cpu_synchronize_state_post_init/reset() accel/nvmm: Expose nvmm_enabled() to common code accel/whpx: Expose whpx_enabled() to common code accel/system: Introduce hwaccel_enabled() helper target/arm: Use generic hwaccel_enabled() to check 'host' cpu type accel/dummy: Extract 'dummy-cpus.h' header from 'system/cpus.h' accel/dummy: Factor dummy_thread_precreate() out accel/tcg: Factor tcg_vcpu_thread_precreate() out
accel: Factor accel_create_vcpu_thread() out
accel: Introduce AccelOpsClass::cpu_thread_routine handler accel/dummy: Convert to AccelOpsClass::cpu_thread_routine accel/tcg: Convert to AccelOpsClass::cpu_thread_routine accel/hvf: Convert to AccelOpsClass::cpu_thread_routine accel/kvm: Convert to AccelOpsClass::cpu_thread_routine accel/nvmm: Convert to AccelOpsClass::cpu_thread_routine accel/whpx: Convert to AccelOpsClass::cpu_thread_routine
accel: Factor accel_cpu_realize() out
accel: Pass old/new interrupt mask to handle_interrupt() handler
accel: Expose and register generic_handle_interrupt()
accel: Always register AccelOpsClass::kick_vcpu_thread() handler
accel: Always register AccelOpsClass::get_elapsed_ticks() handler
accel: Always register AccelOpsClass::get_virtual_clock() handler system/memory: Restrict eventfd dispatch_write() to emulators accel/tcg: Factor tcg_vcpu_init() out for re-use accel/tcg: Factor mttcg_cpu_exec() out for re-use accel/tcg: Factor rr_cpu_exec() out
accel/tcg: Clear exit_request once in tcg_cpu_exec() accel/tcg: Unregister the RCU before exiting RR thread
MAINTAINERS | 1 + qapi/accelerator.json | 92 ++++++++ qapi/machine.json | 68 +----- qapi/qapi-schema.json | 1 + accel/accel-internal.h | 2 + accel/dummy-cpus.h | 15 ++ accel/kvm/kvm-cpus.h | 1 - accel/tcg/internal-common.h | 2 + accel/tcg/tcg-accel-ops-icount.h | 2 +- accel/tcg/tcg-accel-ops-mttcg.h | 4 +- accel/tcg/tcg-accel-ops.h | 5 +- include/hw/core/cpu.h | 3 +- include/qemu/accel.h | 22 +- include/system/accel-ops.h | 42 +++- include/system/cpus.h | 5 - include/system/hvf.h | 38 ---- include/system/hvf_int.h | 37 +++- include/system/hw_accel.h | 34 ++- include/system/kvm.h | 8 - include/system/nvmm.h | 23 +- include/system/runstate.h | 10 + include/system/whpx.h | 27 +-- target/i386/whpx/whpx-accel-ops.h | 1 - accel/accel-common.c | 55 ++++- accel/accel-qmp.c | 34 +++ accel/accel-system.c | 35 ++- accel/dummy-cpus.c | 11 +- accel/hvf/hvf-accel-ops.c | 341 +++++------------------------- accel/hvf/hvf-all.c | 281 ++++++++++++++++++++++-- accel/kvm/kvm-accel-ops.c | 25 +-- accel/kvm/kvm-all.c | 38 ++-- accel/qtest/qtest.c | 10 +- accel/stubs/kvm-stub.c | 9 - accel/stubs/nvmm-stub.c | 12 ++ accel/stubs/whpx-stub.c | 12 ++ accel/tcg/monitor.c | 29 ++- accel/tcg/tcg-accel-ops-icount.c | 8 +- accel/tcg/tcg-accel-ops-mttcg.c | 28 +-- accel/tcg/tcg-accel-ops-rr.c | 40 ++-- accel/tcg/tcg-accel-ops.c | 44 ++-- accel/tcg/tcg-all.c | 20 +- accel/xen/xen-all.c | 13 +- bsd-user/main.c | 2 +- gdbstub/system.c | 7 +- hw/core/machine-hmp-cmds.c | 4 +- hw/core/machine-qmp-cmds.c | 2 + linux-user/main.c | 2 +- system/cpus.c | 55 ++--- system/memory.c | 11 +- system/physmem.c | 8 + target/arm/arm-qmp-cmds.c | 5 +- target/arm/cpu.c | 5 +- target/arm/hvf/hvf.c | 11 +- target/i386/hvf/hvf.c | 11 +- target/i386/hvf/x86hvf.c | 2 +- target/i386/nvmm/nvmm-accel-ops.c | 17 +- target/i386/nvmm/nvmm-all.c | 29 +-- target/i386/whpx/whpx-accel-ops.c | 18 +- target/i386/whpx/whpx-all.c | 33 ++- accel/meson.build | 2 +- accel/stubs/meson.build | 2 + hmp-commands-info.hx | 12 ++ qapi/meson.build | 1 + 63 files changed, 1013 insertions(+), 714 deletions(-) create mode 100644 qapi/accelerator.json create mode 100644 accel/dummy-cpus.h create mode 100644 accel/accel-qmp.c create mode 100644 accel/stubs/nvmm-stub.c create mode 100644 accel/stubs/whpx-stub.c
Signature · 1 line
2.49.0
PATCH v4 1/65 system/runstate: Document qemu_add_vm_change_state_handler()
--- include/system/runstate.h | 10 ++++++++++ 1 file changed, 10 insertions(+)
include/system/runstate.h +10 -0
@@ -14,6 +14,16 @@ void runstate_replay_enable(void);typedef void VMChangeStateHandler (void *opaque,bool running,RunState state);typedef int VMChangeStateHandlerWithRet (void *opaque,bool running,RunState state); +/** +* qemu_add_vm_change_state_handler: +* @cb: the callback to invoke +* @opaque: user data passed to the callback +* +* Register a callback function that is invoked when the vm starts or stops +* running. +* +* Returns: an entry to be freed using qemu_del_vm_change_state_handler() +*/ VMChangeStateEntry *qemu_add_vm_change_state_handler (VMChangeStateHandler *cb,void *opaque); VMChangeStateEntry *qemu_add_vm_change_state_handler_prio(
Signature · 1 line
2.49.0
Re: [PATCH v4 01/65] system/runstate: Document qemu_add_vm_change_state_handler()
Quoted 2 lines · Philippe Mathieu-Daudé
Signed-off-by Philippe Mathieu-Daudé <[email protected]>Reviewed-by Richard Henderson <[email protected]>
Signature · 2 lines
Alex Bennée Virtualisation Tech Lead @ Linaro
PATCH v4 2/65 system/cpus: Defer memory layout changes until vCPUs are realized
In reply to Philippe Mathieu-DaudévCPUs are not really usable until fully realized. Do not attempt to commit memory changes in the middle of vCPU realization. Defer until realization is completed and vCPU fully operational.
--- system/physmem.c | 8 ++++++++ 1 file changed, 8 insertions(+)
system/physmem.c +8 -0
@@ -2792,6 +2792,14 @@ static void tcg_commit(MemoryListener *listener) cpuas =container_of (listener, CPUAddressSpace, tcg_as_listener); cpu = cpuas->cpu; +if (!qdev_is_realized (DEVICE (cpu))) { +/* +* The listener is also called during realize, before +* all of the tcg machinery for run-on is initialized. +*/ +return ; + } +/* * Defer changes to as->memory_dispatch until the cpu is quiescent. * Otherwise we race between (1) other cpu threads and (2) ongoing
Signature · 1 line
2.49.0
Re: [PATCH v4 02/65] system/cpus: Defer memory layout changes until vCPUs are realized
Quoted 16 lines · Philippe Mathieu-Daudé
vCPUs are not really usable until fully realized. Do not attempt to commit memory changes in the middle of vCPU realization. Defer until realization is completed and vCPU fully operational.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>Reviewed-by Richard Henderson <[email protected]>--- system/physmem.c | 8 ++++++++ 1 file changed, 8 insertions(+)system/physmem.c +0
-0@@ -2792,6 +2792,14 @@ static void tcg_commit(MemoryListener *listener) cpuas =container_of (listener, CPUAddressSpace, tcg_as_listener);
system/physmem.c static void tcg_commit(MemoryListener *listener) · line 2802
Quoted 10 lines
system/physmem.c +8
-0cpu = cpuas->cpu; +if (!qdev_is_realized (DEVICE (cpu))) { +/* +* The listener is also called during realize, before +* all of the tcg machinery for run-on is initialized. +*/ +return ; + } +
This is a c&p of the wording bellow:
* That said, the listener is also called during realize, before
* all of the tcg machinery for run-on is initialized: thus halt_cond.
which is now redundant because of the early exit?
Quoted 3 lines
system/physmem.c +0
-0/* * Defer changes to as->memory_dispatch until the cpu is quiescent. * Otherwise we race between (1) other cpu threads and (2) ongoing
Signature · 2 lines
Alex Bennée Virtualisation Tech Lead @ Linaro
Re: [PATCH v4 02/65] system/cpus: Defer memory layout changes until vCPUs are realized
Quoted 31 lines · Alex Bennée
Quoted 16 lines · Philippe Mathieu-Daudé
vCPUs are not really usable until fully realized. Do not attempt to commit memory changes in the middle of vCPU realization. Defer until realization is completed and vCPU fully operational.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>Reviewed-by Richard Henderson <[email protected]>--- system/physmem.c | 8 ++++++++ 1 file changed, 8 insertions(+)system/physmem.c +0
-0@@ -2792,6 +2792,14 @@ static void tcg_commit(MemoryListener *listener) cpuas =container_of (listener, CPUAddressSpace, tcg_as_listener);system/physmem.c static void tcg_commit(MemoryListener *listener) · line 2802
Quoted 10 lines
system/physmem.c +8
-0cpu = cpuas->cpu; +if (!qdev_is_realized (DEVICE (cpu))) { +/* +* The listener is also called during realize, before +* all of the tcg machinery for run-on is initialized. +*/ +return ; + } +This is a c&p of the wording bellow:
Quoted 4 lines
* That said, the listener is also called during realize, before
* all of the tcg machinery for run-on is initialized: thushalt_cond.which is now redundant because of the early exit?
Commit 0d58c660689 ("softmmu: Use async_run_on_cpu in tcg_commit") hmmm.
I don't understand enough this area, so I'll drop this patch for now and keep carrying it for split accel.
Regards,
Phil.
PATCH v4 3/65 system/cpus: Assert interrupt handling is done with BQL locked
In reply to Philippe Mathieu-Daudé--- accel/tcg/tcg-accel-ops.c | 2 -- system/cpus.c | 2 ++ 2 files changed, 2 insertions(+), 2 deletions(-)
accel/tcg/tcg-accel-ops.c +0 -2
@@ -93,8 +93,6 @@ static void tcg_cpu_reset_hold(CPUState *cpu)/* mask must never be zero, except for A20 change call */ void tcg_handle_interrupt (CPUState *cpu,int mask) { -g_assert (bql_locked ()); - cpu->interrupt_request |= mask;/*
system/cpus.c +2 -0
@@ -265,6 +265,8 @@ static void generic_handle_interrupt(CPUState *cpu, int mask)void cpu_interrupt (CPUState *cpu,int mask) { +g_assert (bql_locked ()); +if (cpus_accel->handle_interrupt) { cpus_accel->handle_interrupt (cpu, mask); }else {
Signature · 1 line
2.49.0
PATCH v4 4/65 accel: Keep reference to AccelOpsClass in AccelClass
In reply to Philippe Mathieu-DaudéAllow dereferencing AccelOpsClass outside of accel/accel-system.c.
--- include/qemu/accel.h | 3 +++ include/system/accel-ops.h | 3 ++- accel/accel-common.c | 1 + accel/accel-system.c | 3 ++- accel/tcg/tcg-accel-ops.c | 4 +++- 5 files changed, 11 insertions(+), 3 deletions(-)
include/qemu/accel.h +3 -0
@@ -37,6 +37,9 @@ typedef struct AccelClass {/*< public >*/ const char *name; +/* Cached by accel_init_ops_interfaces() when created */ +AccelOpsClass *ops; +int (*init_machine)(MachineState *ms);bool (*cpu_common_realize)(CPUState *cpu,Error **errp);void (*cpu_common_unrealize)(CPUState *cpu);
include/system/accel-ops.h +2 -1
@@ -10,6 +10,7 @@#ifndef ACCEL_OPS_H #define ACCEL_OPS_H +#include "qemu/accel.h" #include "exec/vaddr.h" #include "qom/object.h"
@@ -31,7 +32,7 @@ struct AccelOpsClass {/*< public >*/ /* initialization function called when accel is chosen */ -void (*ops_init)(AccelOpsClass *ops); +void (*ops_init)(AccelClass *ac);bool (*cpus_are_resettable)(void );void (*cpu_reset_hold)(CPUState *cpu);
accel/accel-common.c +1 -0
@@ -10,6 +10,7 @@#include "qemu/osdep.h" #include "qemu/accel.h" #include "qemu/target-info.h" +#include "system/accel-ops.h" #include "accel/accel-cpu.h" #include "accel-internal.h"
accel/accel-system.c +2 -1
@@ -85,8 +85,9 @@ void accel_init_ops_interfaces(AccelClass *ac)* non-NULL create_vcpu_thread operation. */ ops =ACCEL_OPS_CLASS (oc); + ac->ops = ops;if (ops->ops_init) { - ops->ops_init (ops); + ops->ops_init (ac); }cpus_register_accel (ops); }
accel/tcg/tcg-accel-ops.c +3 -1
@@ -196,8 +196,10 @@ static inline void tcg_remove_all_breakpoints(CPUState *cpu)cpu_watchpoint_remove_all (cpu,BP_GDB ); } -static void tcg_accel_ops_init (AccelOpsClass *ops) +static void tcg_accel_ops_init (AccelClass *ac) { +AccelOpsClass *ops = ac->ops; +if (qemu_tcg_mttcg_enabled ()) { ops->create_vcpu_thread = mttcg_start_vcpu_thread; ops->kick_vcpu_thread = mttcg_kick_vcpu_thread;
Signature · 1 line
2.49.0
PATCH v4 5/65 accel: Introduce AccelOpsClass::cpu_target_realize() hook
In reply to Philippe Mathieu-DaudéAllow accelerators to set vCPU properties before its realization.
--- include/system/accel-ops.h | 1 + accel/accel-common.c | 3 +++ 2 files changed, 4 insertions(+)
include/system/accel-ops.h +1 -0
@@ -35,6 +35,7 @@ struct AccelOpsClass {void (*ops_init)(AccelClass *ac);bool (*cpus_are_resettable)(void ); +bool (*cpu_target_realize)(CPUState *cpu,Error **errp);void (*cpu_reset_hold)(CPUState *cpu);void (*create_vcpu_thread)(CPUState *cpu);/* MANDATORY NON-NULL */
accel/accel-common.c +3 -0
@@ -105,6 +105,9 @@ bool accel_cpu_common_realize(CPUState *cpu, Error **errp)if (acc->cpu_common_realize && !acc->cpu_common_realize (cpu, errp)) {return false; } +if (acc->ops->cpu_target_realize && !acc->ops->cpu_target_realize (cpu, errp)) { +return false; + }return true; }
Signature · 1 line
2.49.0
PATCH v4 6/65 accel/hvf: Add hvf_arch_cpu_realize() stubs
In reply to Philippe Mathieu-DaudéImplement HVF AccelOpsClass::cpu_target_realize() hook as empty stubs. Target implementations will come separately.
--- include/system/hvf.h | 3 +++ accel/hvf/hvf-accel-ops.c | 2 ++ target/arm/hvf/hvf.c | 5 +++++ target/i386/hvf/hvf.c | 5 +++++ 4 files changed, 15 insertions(+)
include/system/hvf.h +3 -0
@@ -72,6 +72,9 @@ void hvf_arch_update_guest_debug(CPUState *cpu);* Return whether the guest supports debugging. */ bool hvf_arch_supports_guest_debug (void ); + +bool hvf_arch_cpu_realize (CPUState *cpu,Error **errp); +#endif /* COMPILING_PER_TARGET */ #endif
accel/hvf/hvf-accel-ops.c +2 -0
@@ -588,6 +588,8 @@ static void hvf_accel_ops_class_init(ObjectClass *oc, const void *data) {AccelOpsClass *ops =ACCEL_OPS_CLASS (oc); + ops->cpu_target_realize = hvf_arch_cpu_realize; + ops->create_vcpu_thread = hvf_start_vcpu_thread; ops->kick_vcpu_thread = hvf_kick_vcpu_thread;
target/arm/hvf/hvf.c +5 -0
@@ -1081,6 +1081,11 @@ int hvf_arch_init_vcpu(CPUState *cpu)return 0 ; } +bool hvf_arch_cpu_realize (CPUState *cs,Error **errp) +{ +return true; +} +void hvf_kick_vcpu_thread (CPUState *cpu) {cpus_kick_thread (cpu);
target/i386/hvf/hvf.c +5 -0
@@ -367,6 +367,11 @@ int hvf_arch_init_vcpu(CPUState *cpu)return 0 ; } +bool hvf_arch_cpu_realize (CPUState *cs,Error **errp) +{ +return true; +} +static void hvf_store_events (CPUState *cpu,uint32_t ins_len,uint64_t idtvec_info) {X86CPU *x86_cpu =X86_CPU (cpu);
Signature · 1 line
2.49.0
PATCH v4 7/65 accel/kvm: Remove kvm_init_cpu_signals() stub
In reply to Philippe Mathieu-DaudéSince commit 57038a92bb0 ("cpus: extract out kvm-specific code to accel/kvm") the kvm_init_cpu_signals() stub is not necessary.
--- accel/stubs/kvm-stub.c | 5 ----- 1 file changed, 5 deletions(-)
accel/stubs/kvm-stub.c +0 -5
@@ -105,11 +105,6 @@ unsigned int kvm_get_free_memslots(void)return 0 ; } -void kvm_init_cpu_signals (CPUState *cpu) -{ -abort (); -} -bool kvm_arm_supports_user_irq (void ) {return false;
Signature · 1 line
2.49.0
PATCH v4 8/65 accel/kvm: Reduce kvm_create_vcpu() declaration scope
In reply to Philippe Mathieu-Daudékvm_create_vcpu() is only used within the same file unit.
--- include/system/kvm.h | 8 -------- accel/kvm/kvm-all.c | 8 +++++++- 2 files changed, 7 insertions(+), 9 deletions(-)
include/system/kvm.h +0 -8
@@ -316,14 +316,6 @@ int kvm_create_device(KVMState *s, uint64_t type, bool test);*/ bool kvm_device_supported (int vmfd,uint64_t type); -/** -* kvm_create_vcpu - Gets a parked KVM vCPU or creates a KVM vCPU -* @cpu: QOM CPUState object for which KVM vCPU has to be fetched/created. -* -* @returns: 0 when success, errno (<0) when failed. -*/ -int kvm_create_vcpu (CPUState *cpu); -/** * kvm_park_vcpu - Park QEMU KVM vCPU context * @cpu: QOM CPUState object for which QEMU KVM vCPU context has to be parked.
accel/kvm/kvm-all.c +7 -1
@@ -453,7 +453,13 @@ static void kvm_reset_parked_vcpus(KVMState *s) } } -int kvm_create_vcpu (CPUState *cpu) +/** +* kvm_create_vcpu - Gets a parked KVM vCPU or creates a KVM vCPU +* @cpu: QOM CPUState object for which KVM vCPU has to be fetched/created. +* +* @returns: 0 when success, errno (<0) when failed. +*/ +static int kvm_create_vcpu (CPUState *cpu) {unsigned long vcpu_id =kvm_arch_vcpu_id (cpu);KVMState *s = kvm_state;
Signature · 1 line
2.49.0
PATCH v4 9/65 accel: Propagate AccelState to AccelClass::init_machine()
In reply to Philippe Mathieu-DaudéIn order to avoid init_machine() to call current_accel(), pass AccelState along.
--- include/qemu/accel.h | 2 +- accel/accel-system.c | 2 +- accel/hvf/hvf-accel-ops.c | 2 +- accel/kvm/kvm-all.c | 2 +- accel/qtest/qtest.c | 2 +- accel/tcg/tcg-all.c | 2 +- accel/xen/xen-all.c | 2 +- bsd-user/main.c | 2 +- linux-user/main.c | 2 +- target/i386/nvmm/nvmm-all.c | 2 +- target/i386/whpx/whpx-all.c | 2 +- 11 files changed, 11 insertions(+), 11 deletions(-)
include/qemu/accel.h +1 -1
@@ -40,7 +40,7 @@ typedef struct AccelClass {/* Cached by accel_init_ops_interfaces() when created */ AccelOpsClass *ops; -int (*init_machine)(MachineState *ms); +int (*init_machine)(AccelState *as,MachineState *ms);bool (*cpu_common_realize)(CPUState *cpu,Error **errp);void (*cpu_common_unrealize)(CPUState *cpu);
accel/accel-system.c +1 -1
@@ -37,7 +37,7 @@ int accel_init_machine(AccelState *accel, MachineState *ms)int ret; ms->accelerator = accel; *(acc->allowed) = true; - ret = acc->init_machine (ms); + ret = acc->init_machine (accel, ms);if (ret <0 ) { ms->accelerator =NULL ; *(acc->allowed) = false;
accel/hvf/hvf-accel-ops.c +1 -1
@@ -321,7 +321,7 @@ static void dummy_signal(int sig)bool hvf_allowed; -static int hvf_accel_init (MachineState *ms) +static int hvf_accel_init (AccelState *as,MachineState *ms) {int x;hv_return_t ret;
accel/kvm/kvm-all.c +1 -1
@@ -2573,7 +2573,7 @@ static int kvm_setup_dirty_ring(KVMState *s)return 0 ; } -static int kvm_init (MachineState *ms) +static int kvm_init (AccelState *as,MachineState *ms) {MachineClass *mc =MACHINE_GET_CLASS (ms); static const char upgrade_note[] =
accel/qtest/qtest.c +1 -1
@@ -37,7 +37,7 @@ static void qtest_set_virtual_clock(int64_t count)qatomic_set_i64 (&qtest_clock_counter, count); } -static int qtest_init_accel (MachineState *ms) +static int qtest_init_accel (AccelState *as,MachineState *ms) {return 0 ; }
accel/tcg/tcg-all.c +1 -1
@@ -80,7 +80,7 @@ static void tcg_accel_instance_init(Object *obj)bool one_insn_per_tb; -static int tcg_init_machine (MachineState *ms) +static int tcg_init_machine (AccelState *as,MachineState *ms) {TCGState *s =TCG_STATE (current_accel ());unsigned max_threads =1 ;
accel/xen/xen-all.c +1 -1
@@ -76,7 +76,7 @@ static void xen_setup_post(MachineState *ms, AccelState *accel) } } -static int xen_init (MachineState *ms) +static int xen_init (AccelState *as,MachineState *ms) {MachineClass *mc =MACHINE_GET_CLASS (ms);
bsd-user/main.c +1 -1
@@ -474,7 +474,7 @@ int main(int argc, char **argv) opt_one_insn_per_tb, &error_abort);object_property_set_int (OBJECT (accel),"tb-size" , opt_tb_size, &error_abort); - ac->init_machine (NULL ); + ac->init_machine (accel,NULL ); }/*
linux-user/main.c +1 -1
@@ -820,7 +820,7 @@ int main(int argc, char **argv, char **envp) opt_one_insn_per_tb, &error_abort);object_property_set_int (OBJECT (accel),"tb-size" , opt_tb_size, &error_abort); - ac->init_machine (NULL ); + ac->init_machine (accel,NULL ); }/*
target/i386/nvmm/nvmm-all.c +1 -1
@@ -1153,7 +1153,7 @@ static struct RAMBlockNotifier nvmm_ram_notifier = {/* -------------------------------------------------------------------------- */ static int -nvmm_accel_init (MachineState *ms) +nvmm_accel_init (AccelState *as,MachineState *ms) {int ret, err;
target/i386/whpx/whpx-all.c +1 -1
@@ -2505,7 +2505,7 @@ static void whpx_set_kernel_irqchip(Object *obj, Visitor *v,* Partition support */ -static int whpx_accel_init (MachineState *ms) +static int whpx_accel_init (AccelState *as,MachineState *ms) {struct whpx_state *whpx;int ret;
Signature · 1 line
2.49.0
PATCH v4 10/65 accel/kvm: Prefer local AccelState over global MachineState::accel
In reply to Philippe Mathieu-Daudé--- accel/kvm/kvm-all.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
accel/kvm/kvm-all.c +1 -3
@@ -2588,15 +2588,13 @@ static int kvm_init(AccelState *as, MachineState *ms) {/* end of list */ } }, *nc = num_cpus;int soft_vcpus_limit, hard_vcpus_limit; -KVMState *s; +KVMState *s =KVM_STATE (as);const KVMCapabilityInfo *missing_cap;int ret;int type;qemu_mutex_init (&kml_slots_lock); - s =KVM_STATE (ms->accelerator); -/* * On systems where the kernel can support different base page * sizes, host page size may be different from TARGET_PAGE_SIZE,
Signature · 1 line
2.49.0
PATCH v4 11/65 accel/hvf: Re-use QOM allocated state
In reply to Philippe Mathieu-Daudé--- accel/hvf/hvf-accel-ops.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
accel/hvf/hvf-accel-ops.c +1 -3
@@ -325,7 +325,7 @@ static int hvf_accel_init(AccelState *as, MachineState *ms) {int x;hv_return_t ret; -HVFState *s; +HVFState *s =HVF_STATE (as);int pa_range =36 ;MachineClass *mc =MACHINE_GET_CLASS (ms);
@@ -339,8 +339,6 @@ static int hvf_accel_init(AccelState *as, MachineState *ms) ret =hvf_arch_vm_create (ms, (uint32_t )pa_range);assert_hvf_ok (ret); - s =g_new0 (HVFState,1 ); - s->num_slots =ARRAY_SIZE (s->slots);for (x =0 ; x < s->num_slots; ++x) { s->slots[x].size =0 ;
Signature · 1 line
2.49.0
PATCH v4 12/65 accel/tcg: Prefer local AccelState over global current_accel()
In reply to Philippe Mathieu-Daudé--- accel/tcg/tcg-all.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
accel/tcg/tcg-all.c +1 -1
@@ -82,7 +82,7 @@ bool one_insn_per_tb;static int tcg_init_machine (AccelState *as,MachineState *ms) { -TCGState *s =TCG_STATE (current_accel ()); +TCGState *s =TCG_STATE (as);unsigned max_threads =1 ;#ifndef CONFIG_USER_ONLY
Signature · 1 line
2.49.0
PATCH v4 13/65 accel: Directly pass AccelState argument to AccelClass::has_memory()
In reply to Philippe Mathieu-Daudé--- include/qemu/accel.h | 2 +- accel/kvm/kvm-all.c | 4 ++-- system/memory.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-)
include/qemu/accel.h +1 -1
@@ -46,7 +46,7 @@ typedef struct AccelClass {/* system related hooks */ void (*setup_post)(MachineState *ms,AccelState *accel); -bool (*has_memory)(MachineState *ms,AddressSpace *as, +bool (*has_memory)(AccelState *accel,AddressSpace *as,hwaddr start_addr,hwaddr size);/* gdbstub related hooks */
accel/kvm/kvm-all.c +2 -2
@@ -3789,10 +3789,10 @@ int kvm_get_one_reg(CPUState *cs, uint64_t id, void *target)return r; } -static bool kvm_accel_has_memory (MachineState *ms,AddressSpace *as, +static bool kvm_accel_has_memory (AccelState *accel,AddressSpace *as,hwaddr start_addr,hwaddr size) { -KVMState *kvm =KVM_STATE (ms->accelerator); +KVMState *kvm =KVM_STATE (accel);int i;for (i =0 ; i < kvm->nr_as; ++i) {
system/memory.c +1 -1
@@ -3501,7 +3501,7 @@ static void mtree_print_flatview(gpointer key, gpointer value,if (fvi->ac) {for (i =0 ; i < fv_address_spaces->len; ++i) { as = g_array_index(fv_address_spaces, AddressSpace*, i); -if (fvi->ac->has_memory (current_machine, as, +if (fvi->ac->has_memory (current_machine->accelerator, as,int128_get64 (range->addr.start),MR_SIZE (range->addr.size) +1 )) {qemu_printf (" %s" , fvi->ac->name);
Signature · 1 line
2.49.0
PATCH v4 14/65 accel/kvm: Directly pass KVMState argument to do_kvm_create_vm()
In reply to Philippe Mathieu-Daudé--- accel/kvm/kvm-all.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
accel/kvm/kvm-all.c +2 -5
@@ -2470,13 +2470,10 @@ uint32_t kvm_dirty_ring_size(void)return kvm_state->kvm_dirty_ring_size; } -static int do_kvm_create_vm (MachineState *ms,int type) +static int do_kvm_create_vm (KVMState *s,int type) { -KVMState *s;int ret; - s =KVM_STATE (ms->accelerator); -do { ret =kvm_ioctl (s,KVM_CREATE_VM , type); }while (ret == -EINTR );
@@ -2646,7 +2643,7 @@ static int kvm_init(AccelState *as, MachineState *ms) goto err; } - ret =do_kvm_create_vm (ms, type); + ret =do_kvm_create_vm (s, type);if (ret <0 ) { goto err; }
Signature · 1 line
2.49.0
PATCH v4 15/65 accel: Remove unused MachineState argument of AccelClass::setup_post()
In reply to Philippe Mathieu-DaudéThis method only accesses xen_domid/xen_domid_restrict, which are both related to the 'accelerator', not the machine. Besides, xen_domid aims to be in Xen AccelState and xen_domid_restrict a xen_domid_restrict QOM property.
--- include/qemu/accel.h | 2 +- accel/accel-system.c | 2 +- accel/xen/xen-all.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
include/qemu/accel.h +1 -1
@@ -45,7 +45,7 @@ typedef struct AccelClass {void (*cpu_common_unrealize)(CPUState *cpu);/* system related hooks */ -void (*setup_post)(MachineState *ms,AccelState *accel); +void (*setup_post)(AccelState *as);bool (*has_memory)(AccelState *accel,AddressSpace *as,hwaddr start_addr,hwaddr size);
accel/accel-system.c +1 -1
@@ -58,7 +58,7 @@ void accel_setup_post(MachineState *ms)AccelState *accel = ms->accelerator;AccelClass *acc =ACCEL_GET_CLASS (accel);if (acc->setup_post) { - acc->setup_post (ms, accel); + acc->setup_post (accel); } }
accel/xen/xen-all.c +1 -1
@@ -63,7 +63,7 @@ static void xen_set_igd_gfx_passthru(Object *obj, bool value, Error **errp)xen_igd_gfx_pt_set (value, errp); } -static void xen_setup_post (MachineState *ms,AccelState *accel) +static void xen_setup_post (AccelState *as) {int rc;
Signature · 1 line
2.49.0
PATCH v4 16/65 accel: Pass AccelState argument to gdbstub_supported_sstep_flags()
In reply to Philippe Mathieu-DaudéIn order to have AccelClass methods instrospect their state, we need to pass AccelState by argument.
--- include/qemu/accel.h | 2 +- accel/accel-common.c | 2 +- accel/hvf/hvf-accel-ops.c | 2 +- accel/kvm/kvm-all.c | 2 +- accel/tcg/tcg-all.c | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-)
include/qemu/accel.h +1 -1
@@ -50,7 +50,7 @@ typedef struct AccelClass { hwaddr start_addr, hwaddr size);/* gdbstub related hooks */ -int (*gdbstub_supported_sstep_flags)(void ); +int (*gdbstub_supported_sstep_flags)(AccelState *as);bool *allowed;/*
accel/accel-common.c +1 -1
@@ -128,7 +128,7 @@ int accel_supported_gdbstub_sstep_flags(void)AccelState *accel =current_accel ();AccelClass *acc =ACCEL_GET_CLASS (accel);if (acc->gdbstub_supported_sstep_flags) { -return acc->gdbstub_supported_sstep_flags (); +return acc->gdbstub_supported_sstep_flags (accel); }return 0 ; }
accel/hvf/hvf-accel-ops.c +1 -1
@@ -353,7 +353,7 @@ static int hvf_accel_init(AccelState *as, MachineState *ms)return hvf_arch_init (); } -static inline int hvf_gdbstub_sstep_flags (void ) +static inline int hvf_gdbstub_sstep_flags (AccelState *as) {return SSTEP_ENABLE |SSTEP_NOIRQ ; }
accel/kvm/kvm-all.c +1 -1
@@ -3980,7 +3980,7 @@ static void kvm_accel_instance_init(Object *obj)* Returns: SSTEP_* flags that KVM supports for guest debug. The * support is probed during kvm_init() */ -static int kvm_gdbstub_sstep_flags (void ) +static int kvm_gdbstub_sstep_flags (AccelState *as) {return kvm_sstep_flags; }
accel/tcg/tcg-all.c +1 -1
@@ -219,7 +219,7 @@ static void tcg_set_one_insn_per_tb(Object *obj, bool value, Error **errp)qatomic_set (&one_insn_per_tb, value); } -static int tcg_gdbstub_supported_sstep_flags (void ) +static int tcg_gdbstub_supported_sstep_flags (AccelState *as) {/* * In replay mode all events will come from the log and can't be
Signature · 1 line
2.49.0
PATCH v4 17/65 accel: Move supports_guest_debug() declaration to AccelClass
In reply to Philippe Mathieu-DaudéAccelOpsClass is for methods dealing with vCPUs. When only dealing with AccelState, AccelClass is sufficient.
In order to have AccelClass methods instrospect their state, we need to pass AccelState by argument.
--- accel/kvm/kvm-cpus.h | 1 - include/qemu/accel.h | 1 + include/system/accel-ops.h | 1 - include/system/hvf.h | 2 +- accel/hvf/hvf-accel-ops.c | 2 +- accel/kvm/kvm-accel-ops.c | 1 - accel/kvm/kvm-all.c | 5 ++++- accel/tcg/tcg-accel-ops.c | 6 ------ accel/tcg/tcg-all.c | 6 ++++++ gdbstub/system.c | 7 ++++--- target/arm/hvf/hvf.c | 2 +- target/i386/hvf/hvf.c | 2 +- 12 files changed, 19 insertions(+), 17 deletions(-)
accel/kvm/kvm-cpus.h +0 -1
@@ -16,7 +16,6 @@ void kvm_destroy_vcpu(CPUState *cpu);void kvm_cpu_synchronize_post_reset (CPUState *cpu);void kvm_cpu_synchronize_post_init (CPUState *cpu);void kvm_cpu_synchronize_pre_loadvm (CPUState *cpu); -bool kvm_supports_guest_debug (void );int kvm_insert_breakpoint (CPUState *cpu,int type,vaddr addr,vaddr len);int kvm_remove_breakpoint (CPUState *cpu,int type,vaddr addr,vaddr len);void kvm_remove_all_breakpoints (CPUState *cpu);
include/qemu/accel.h +1 -0
@@ -50,6 +50,7 @@ typedef struct AccelClass { hwaddr start_addr, hwaddr size);/* gdbstub related hooks */ +bool (*supports_guest_debug)(AccelState *as);int (*gdbstub_supported_sstep_flags)(AccelState *as);bool *allowed;
include/system/accel-ops.h +0 -1
@@ -65,7 +65,6 @@ struct AccelOpsClass {int64_t (*get_elapsed_ticks)(void );/* gdbstub hooks */ -bool (*supports_guest_debug)(void );int (*update_guest_debug)(CPUState *cpu);int (*insert_breakpoint)(CPUState *cpu,int type,vaddr addr,vaddr len);int (*remove_breakpoint)(CPUState *cpu,int type,vaddr addr,vaddr len);
include/system/hvf.h +1 -1
@@ -71,7 +71,7 @@ void hvf_arch_update_guest_debug(CPUState *cpu);/* * Return whether the guest supports debugging. */ -bool hvf_arch_supports_guest_debug (void ); +bool hvf_arch_supports_guest_debug (AccelState *as);bool hvf_arch_cpu_realize (CPUState *cpu,Error **errp);
accel/hvf/hvf-accel-ops.c +1 -1
@@ -364,6 +364,7 @@ static void hvf_accel_class_init(ObjectClass *oc, const void *data) ac->name ="HVF" ; ac->init_machine = hvf_accel_init; ac->allowed = &hvf_allowed; + ac->supports_guest_debug = hvf_arch_supports_guest_debug; ac->gdbstub_supported_sstep_flags = hvf_gdbstub_sstep_flags; }
@@ -600,7 +601,6 @@ static void hvf_accel_ops_class_init(ObjectClass *oc, const void *data) ops->remove_breakpoint = hvf_remove_breakpoint; ops->remove_all_breakpoints = hvf_remove_all_breakpoints; ops->update_guest_debug = hvf_update_guest_debug; - ops->supports_guest_debug = hvf_arch_supports_guest_debug; };static const TypeInfo hvf_accel_ops_type = { .name =ACCEL_OPS_NAME ("hvf" ),
accel/kvm/kvm-accel-ops.c +0 -1
@@ -104,7 +104,6 @@ static void kvm_accel_ops_class_init(ObjectClass *oc, const void *data)#ifdef TARGET_KVM_HAVE_GUEST_DEBUG ops->update_guest_debug = kvm_update_guest_debug_ops; - ops->supports_guest_debug = kvm_supports_guest_debug; ops->insert_breakpoint = kvm_insert_breakpoint; ops->remove_breakpoint = kvm_remove_breakpoint; ops->remove_all_breakpoints = kvm_remove_all_breakpoints;
accel/kvm/kvm-all.c +4 -1
@@ -3528,7 +3528,7 @@ int kvm_update_guest_debug(CPUState *cpu, unsigned long reinject_trap)return data.err; } -bool kvm_supports_guest_debug (void ) +static bool kvm_supports_guest_debug (AccelState *as) {/* probed during kvm_init() */ return kvm_has_guest_debug;
@@ -3993,6 +3993,9 @@ static void kvm_accel_class_init(ObjectClass *oc, const void *data) ac->has_memory = kvm_accel_has_memory; ac->allowed = &kvm_allowed; ac->gdbstub_supported_sstep_flags = kvm_gdbstub_sstep_flags; +#ifdef TARGET_KVM_HAVE_GUEST_DEBUG + ac->supports_guest_debug = kvm_supports_guest_debug; +#endif object_class_property_add(oc, "kernel-irqchip", "on|off|split", NULL, kvm_set_kernel_irqchip,
accel/tcg/tcg-accel-ops.c +0 -6
@@ -106,11 +106,6 @@ void tcg_handle_interrupt(CPUState *cpu, int mask) } } -static bool tcg_supports_guest_debug (void ) -{ -return true; -} -/* Translate GDB watchpoint type to a flags value for cpu_watchpoint_* */ static inline int xlat_gdb_type (CPUState *cpu,int gdbtype) {
@@ -218,7 +213,6 @@ static void tcg_accel_ops_init(AccelClass *ac) } ops->cpu_reset_hold = tcg_cpu_reset_hold; - ops->supports_guest_debug = tcg_supports_guest_debug; ops->insert_breakpoint = tcg_insert_breakpoint; ops->remove_breakpoint = tcg_remove_breakpoint; ops->remove_all_breakpoints = tcg_remove_all_breakpoints;
accel/tcg/tcg-all.c +6 -0
@@ -219,6 +219,11 @@ static void tcg_set_one_insn_per_tb(Object *obj, bool value, Error **errp)qatomic_set (&one_insn_per_tb, value); } +static bool tcg_supports_guest_debug (AccelState *as) +{ +return true; +} +static int tcg_gdbstub_supported_sstep_flags (AccelState *as) {/*
@@ -242,6 +247,7 @@ static void tcg_accel_class_init(ObjectClass *oc, const void *data) ac->cpu_common_realize = tcg_exec_realizefn; ac->cpu_common_unrealize = tcg_exec_unrealizefn; ac->allowed = &tcg_allowed; + ac->supports_guest_debug = tcg_supports_guest_debug; ac->gdbstub_supported_sstep_flags = tcg_gdbstub_supported_sstep_flags; object_class_property_add_str(oc, "thread",
gdbstub/system.c +4 -3
@@ -634,9 +634,10 @@ int gdb_signal_to_target(int sig)bool gdb_supports_guest_debug (void ) { -const AccelOpsClass *ops =cpus_get_accel (); -if (ops->supports_guest_debug) { -return ops->supports_guest_debug (); +AccelState *accel =current_accel (); +AccelClass *acc =ACCEL_GET_CLASS (accel); +if (acc->supports_guest_debug) { +return acc->supports_guest_debug (accel); }return false; }
target/arm/hvf/hvf.c +1 -1
@@ -2357,7 +2357,7 @@ void hvf_arch_update_guest_debug(CPUState *cpu)hvf_arch_set_traps (cpu); } -bool hvf_arch_supports_guest_debug (void ) +bool hvf_arch_supports_guest_debug (AccelState *as) {return true; }
target/i386/hvf/hvf.c +1 -1
@@ -1024,7 +1024,7 @@ void hvf_arch_update_guest_debug(CPUState *cpu) { } -bool hvf_arch_supports_guest_debug (void ) +bool hvf_arch_supports_guest_debug (AccelState *as) {return false; }
Signature · 1 line
2.49.0
PATCH v4 18/65 accel: Move cpus_are_resettable() declaration to AccelClass
In reply to Philippe Mathieu-DaudéAccelOpsClass is for methods dealing with vCPUs. When only dealing with AccelState, AccelClass is sufficient.
Move cpus_are_resettable() declaration to accel/accel-system.c.
In order to have AccelClass methods instrospect their state, we need to pass AccelState by argument.
Adapt KVM handler.
--- include/qemu/accel.h | 1 + include/system/accel-ops.h | 1 - accel/accel-system.c | 10 ++++++++++ accel/kvm/kvm-accel-ops.c | 6 ------ accel/kvm/kvm-all.c | 6 ++++++ system/cpus.c | 8 -------- 6 files changed, 17 insertions(+), 15 deletions(-)
include/qemu/accel.h +1 -0
@@ -48,6 +48,7 @@ typedef struct AccelClass {void (*setup_post)(AccelState *as);bool (*has_memory)(AccelState *accel,AddressSpace *as,hwaddr start_addr,hwaddr size); +bool (*cpus_are_resettable)(AccelState *as);/* gdbstub related hooks */ bool (*supports_guest_debug)(AccelState *as);
include/system/accel-ops.h +0 -1
@@ -34,7 +34,6 @@ struct AccelOpsClass {/* initialization function called when accel is chosen */ void (*ops_init)(AccelClass *ac); -bool (*cpus_are_resettable)(void );bool (*cpu_target_realize)(CPUState *cpu,Error **errp);void (*cpu_reset_hold)(CPUState *cpu);
accel/accel-system.c +10 -0
@@ -62,6 +62,16 @@ void accel_setup_post(MachineState *ms) } } +bool cpus_are_resettable (void ) +{ +AccelState *accel =current_accel (); +AccelClass *acc =ACCEL_GET_CLASS (accel); +if (acc->cpus_are_resettable) { +return acc->cpus_are_resettable (accel); + } +return true; +} +/* initialize the arch-independent accel operation interfaces */ void accel_init_ops_interfaces (AccelClass *ac) {
accel/kvm/kvm-accel-ops.c +0 -6
@@ -78,11 +78,6 @@ static bool kvm_vcpu_thread_is_idle(CPUState *cpu)return !kvm_halt_in_kernel (); } -static bool kvm_cpus_are_resettable (void ) -{ -return !kvm_enabled () || !kvm_state->guest_state_protected; -} -#ifdef TARGET_KVM_HAVE_GUEST_DEBUG static int kvm_update_guest_debug_ops (CPUState *cpu) {
@@ -96,7 +91,6 @@ static void kvm_accel_ops_class_init(ObjectClass *oc, const void *data) ops->create_vcpu_thread = kvm_start_vcpu_thread; ops->cpu_thread_is_idle = kvm_vcpu_thread_is_idle; - ops->cpus_are_resettable = kvm_cpus_are_resettable; ops->synchronize_post_reset = kvm_cpu_synchronize_post_reset; ops->synchronize_post_init = kvm_cpu_synchronize_post_init; ops->synchronize_state = kvm_cpu_synchronize_state;
accel/kvm/kvm-all.c +6 -0
@@ -3974,6 +3974,11 @@ static void kvm_accel_instance_init(Object *obj) s->msr_energy.enable = false; } +static bool kvm_cpus_are_resettable (AccelState *as) +{ +return !kvm_enabled () || !kvm_state->guest_state_protected; +} +/** * kvm_gdbstub_sstep_flags(): *
@@ -3992,6 +3997,7 @@ static void kvm_accel_class_init(ObjectClass *oc, const void *data) ac->init_machine = kvm_init; ac->has_memory = kvm_accel_has_memory; ac->allowed = &kvm_allowed; + ac->cpus_are_resettable = kvm_cpus_are_resettable; ac->gdbstub_supported_sstep_flags = kvm_gdbstub_sstep_flags;#ifdef TARGET_KVM_HAVE_GUEST_DEBUG ac->supports_guest_debug = kvm_supports_guest_debug;
system/cpus.c +0 -8
@@ -195,14 +195,6 @@ void cpu_synchronize_pre_loadvm(CPUState *cpu) } } -bool cpus_are_resettable (void ) -{ -if (cpus_accel->cpus_are_resettable) { -return cpus_accel->cpus_are_resettable (); - } -return true; -} -void cpu_exec_reset_hold (CPUState *cpu) {if (cpus_accel->cpu_reset_hold) {
Signature · 1 line
2.49.0
PATCH v4 19/65 accel: Move cpu_common_[un]realize() declarations to AccelOpsClass
In reply to Philippe Mathieu-DaudéAccelClass is for methods dealing with AccelState. When dealing with vCPUs, we want AccelOpsClass.
--- include/qemu/accel.h | 2 -- include/system/accel-ops.h | 2 ++ accel/accel-common.c | 10 ++++++---- accel/tcg/tcg-accel-ops.c | 3 +++ accel/tcg/tcg-all.c | 2 -- 5 files changed, 11 insertions(+), 8 deletions(-)
include/qemu/accel.h +0 -2
@@ -41,8 +41,6 @@ typedef struct AccelClass {AccelOpsClass *ops;int (*init_machine)(AccelState *as,MachineState *ms); -bool (*cpu_common_realize)(CPUState *cpu,Error **errp); -void (*cpu_common_unrealize)(CPUState *cpu);/* system related hooks */ void (*setup_post)(AccelState *as);
include/system/accel-ops.h +2 -0
@@ -34,6 +34,8 @@ struct AccelOpsClass {/* initialization function called when accel is chosen */ void (*ops_init)(AccelClass *ac); +bool (*cpu_common_realize)(CPUState *cpu,Error **errp); +void (*cpu_common_unrealize)(CPUState *cpu);bool (*cpu_target_realize)(CPUState *cpu,Error **errp);void (*cpu_reset_hold)(CPUState *cpu);
accel/accel-common.c +6 -4
@@ -102,10 +102,12 @@ bool accel_cpu_common_realize(CPUState *cpu, Error **errp) }/* generic realization */ -if (acc->cpu_common_realize && !acc->cpu_common_realize (cpu, errp)) { +if (acc->ops->cpu_common_realize + && !acc->ops->cpu_common_realize (cpu, errp)) {return false; } -if (acc->ops->cpu_target_realize && !acc->ops->cpu_target_realize (cpu, errp)) { +if (acc->ops->cpu_target_realize + && !acc->ops->cpu_target_realize (cpu, errp)) {return false; }
@@ -118,8 +120,8 @@ void accel_cpu_common_unrealize(CPUState *cpu)AccelClass *acc =ACCEL_GET_CLASS (accel);/* generic unrealization */ -if (acc->cpu_common_unrealize) { - acc->cpu_common_unrealize (cpu); +if (acc->ops->cpu_common_unrealize) { + acc->ops->cpu_common_unrealize (cpu); } }
accel/tcg/tcg-accel-ops.c +3 -0
@@ -46,6 +46,7 @@#include "tcg-accel-ops-mttcg.h" #include "tcg-accel-ops-rr.h" #include "tcg-accel-ops-icount.h" +#include "internal-common.h" /* common functionality among all TCG variants */
@@ -212,6 +213,8 @@ static void tcg_accel_ops_init(AccelClass *ac) } } + ops->cpu_common_realize = tcg_exec_realizefn; + ops->cpu_common_unrealize = tcg_exec_unrealizefn; ops->cpu_reset_hold = tcg_cpu_reset_hold; ops->insert_breakpoint = tcg_insert_breakpoint; ops->remove_breakpoint = tcg_remove_breakpoint;
accel/tcg/tcg-all.c +0 -2
@@ -244,8 +244,6 @@ static void tcg_accel_class_init(ObjectClass *oc, const void *data)AccelClass *ac =ACCEL_CLASS (oc); ac->name ="tcg" ; ac->init_machine = tcg_init_machine; - ac->cpu_common_realize = tcg_exec_realizefn; - ac->cpu_common_unrealize = tcg_exec_unrealizefn; ac->allowed = &tcg_allowed; ac->supports_guest_debug = tcg_supports_guest_debug; ac->gdbstub_supported_sstep_flags = tcg_gdbstub_supported_sstep_flags;
Signature · 1 line
2.49.0
PATCH v4 20/65 accel/system: Convert pre_resume() from AccelOpsClass to AccelClass
In reply to Philippe Mathieu-DaudéAccelerators call pre_resume() once. Since it isn't a method to call for each vCPU, move it from AccelOpsClass to AccelClass. Adapt WHPX.
--- include/qemu/accel.h | 3 +++ include/system/accel-ops.h | 1 - target/i386/whpx/whpx-accel-ops.h | 1 - accel/accel-system.c | 9 +++++++++ system/cpus.c | 4 +--- target/i386/whpx/whpx-accel-ops.c | 1 - target/i386/whpx/whpx-all.c | 3 ++- 7 files changed, 15 insertions(+), 7 deletions(-)
include/qemu/accel.h +3 -0
@@ -47,6 +47,7 @@ typedef struct AccelClass {bool (*has_memory)(AccelState *accel,AddressSpace *as,hwaddr start_addr,hwaddr size);bool (*cpus_are_resettable)(AccelState *as); +void (*pre_resume_vm)(AccelState *as,bool step_pending);/* gdbstub related hooks */ bool (*supports_guest_debug)(AccelState *as);
@@ -86,6 +87,8 @@ int accel_init_machine(AccelState *accel, MachineState *ms);/* Called just before os_setup_post (ie just before drop OS privs) */ void accel_setup_post (MachineState *ms); +void accel_pre_resume (MachineState *ms,bool step_pending); +/** * accel_cpu_instance_init: * @cpu: The CPU that needs to do accel-specific object initializations.
include/system/accel-ops.h +0 -1
@@ -47,7 +47,6 @@ struct AccelOpsClass {void (*synchronize_post_init)(CPUState *cpu);void (*synchronize_state)(CPUState *cpu);void (*synchronize_pre_loadvm)(CPUState *cpu); -void (*synchronize_pre_resume)(bool step_pending);void (*handle_interrupt)(CPUState *cpu,int mask);
target/i386/whpx/whpx-accel-ops.h +0 -1
@@ -21,7 +21,6 @@ void whpx_cpu_synchronize_state(CPUState *cpu);void whpx_cpu_synchronize_post_reset (CPUState *cpu);void whpx_cpu_synchronize_post_init (CPUState *cpu);void whpx_cpu_synchronize_pre_loadvm (CPUState *cpu); -void whpx_cpu_synchronize_pre_resume (bool step_pending);/* state subset only touched by the VCPU itself during runtime */ #define WHPX_SET_RUNTIME_STATE 1
accel/accel-system.c +9 -0
@@ -62,6 +62,15 @@ void accel_setup_post(MachineState *ms) } } +void accel_pre_resume (MachineState *ms,bool step_pending) +{ +AccelState *accel = ms->accelerator; +AccelClass *acc =ACCEL_GET_CLASS (accel); +if (acc->pre_resume_vm) { + acc->pre_resume_vm (accel, step_pending); + } +} +bool cpus_are_resettable (void ) {AccelState *accel =current_accel ();
system/cpus.c +1 -3
@@ -762,9 +762,7 @@ int vm_prepare_start(bool step_pending)* WHPX accelerator needs to know whether we are going to step * any CPUs, before starting the first one. */ -if (cpus_accel->synchronize_pre_resume) { - cpus_accel->synchronize_pre_resume (step_pending); - } +accel_pre_resume (MACHINE (qdev_get_machine ()), step_pending);/* We are sending this now, but the CPUs will be resumed shortly later */ qapi_event_send_resume ();
target/i386/whpx/whpx-accel-ops.c +0 -1
@@ -95,7 +95,6 @@ static void whpx_accel_ops_class_init(ObjectClass *oc, const void *data) ops->synchronize_post_init = whpx_cpu_synchronize_post_init; ops->synchronize_state = whpx_cpu_synchronize_state; ops->synchronize_pre_loadvm = whpx_cpu_synchronize_pre_loadvm; - ops->synchronize_pre_resume = whpx_cpu_synchronize_pre_resume; }static const TypeInfo whpx_accel_ops_type = {
target/i386/whpx/whpx-all.c +2 -1
@@ -2106,7 +2106,7 @@ void whpx_cpu_synchronize_pre_loadvm(CPUState *cpu)run_on_cpu (cpu, do_whpx_cpu_synchronize_pre_loadvm,RUN_ON_CPU_NULL ); } -void whpx_cpu_synchronize_pre_resume (bool step_pending) +static void whpx_pre_resume_vm (AccelState *as,bool step_pending) { whpx_global.step_pending = step_pending; }
@@ -2703,6 +2703,7 @@ static void whpx_accel_class_init(ObjectClass *oc, const void *data)AccelClass *ac =ACCEL_CLASS (oc); ac->name ="WHPX" ; ac->init_machine = whpx_accel_init; + ac->pre_resume_vm = whpx_pre_resume_vm; ac->allowed = &whpx_allowed; object_class_property_add(oc, "kernel-irqchip", "on|off|split",
Signature · 1 line
2.49.0
PATCH v4 21/65 hw/core/machine: Display CPU model name in 'info cpus' command
In reply to Philippe Mathieu-DaudéDisplay the CPU model in 'info cpus'. Example before:
$ qemu-system-aarch64 -M xlnx-versal-virt -S -monitor stdio QEMU 10.0.0 monitor - type 'help' for more information (qemu) info cpus * CPU #0: thread_id=42924 CPU #1: thread_id=42924 CPU #2: thread_id=42924 CPU #3: thread_id=42924 (qemu) q
and after:
$ qemu-system-aarch64 -M xlnx-versal-virt -S -monitor stdio QEMU 10.0.50 monitor - type 'help' for more information (qemu) info cpus * CPU #0: thread_id=42916 (cortex-a72) CPU #1: thread_id=42916 (cortex-a72) CPU #2: thread_id=42916 (cortex-r5f) CPU #3: thread_id=42916 (cortex-r5f) (qemu)
--- qapi/machine.json | 3 +++ hw/core/machine-hmp-cmds.c | 3 ++- hw/core/machine-qmp-cmds.c | 1 + 3 files changed, 6 insertions(+), 1 deletion(-)
qapi/machine.json +3 -0
@@ -80,6 +80,8 @@ # # @thread-id: ID of the underlying host thread # +# @model: CPU model name (since 10.1) +# # @props: properties associated with a virtual CPU, e.g. the socket id # # @target: the QEMU system emulation target, which determines which
@@ -91,6 +93,7 @@ 'base' : { 'cpu-index' : 'int', 'qom-path' : 'str', 'thread-id' : 'int', + 'model' : 'str', '*props' : 'CpuInstanceProperties', 'target' : 'SysEmuTarget' }, 'discriminator' : 'target',
hw/core/machine-hmp-cmds.c +2 -1
@@ -40,7 +40,8 @@ void hmp_info_cpus(Monitor *mon, const QDict *qdict)monitor_printf (mon,"%c CPU #%" PRId64":" , active, cpu->value->cpu_index); -monitor_printf (mon," thread_id=%" PRId64"\n" , cpu->value->thread_id); +monitor_printf (mon," thread_id=%" PRId64" (%s)\n" , + cpu->value->thread_id, cpu->value->model); }qapi_free_CpuInfoFastList (cpu_list);
hw/core/machine-qmp-cmds.c +1 -0
@@ -47,6 +47,7 @@ CpuInfoFastList *qmp_query_cpus_fast(Error **errp) value->cpu_index = cpu->cpu_index; value->qom_path =object_get_canonical_path (OBJECT (cpu)); value->thread_id = cpu->thread_id; + value->model =cpu_model_from_type (object_get_typename (OBJECT (cpu)));if (mc->cpu_index_to_instance_props) {CpuInstanceProperties *props;
Signature · 1 line
2.49.0
Re: [PATCH v4 21/65] hw/core/machine: Display CPU model name in 'info cpus' command
Quoted 28 lines · Philippe Mathieu-Daudé
Date: Wed, 2 Jul 2025 20:52:43 +0200
From: Philippe Mathieu-Daudé <[email protected]>
Subject: [PATCH v4 21/65] hw/core/machine: Display CPU model name in 'info
cpus' command
X-Mailer: git-send-email 2.49.0Display the CPU model in 'info cpus'. Example before:
$ qemu-system-aarch64 -M xlnx-versal-virt -S -monitor stdio QEMU 10.0.0 monitor - type 'help' for more information (qemu) info cpus * CPU #0: thread_id=42924 CPU #1: thread_id=42924 CPU #2: thread_id=42924 CPU #3: thread_id=42924 (qemu) qand after:
$ qemu-system-aarch64 -M xlnx-versal-virt -S -monitor stdio QEMU 10.0.50 monitor - type 'help' for more information (qemu) info cpus * CPU #0: thread_id=42916 (cortex-a72) CPU #1: thread_id=42916 (cortex-a72) CPU #2: thread_id=42916 (cortex-r5f) CPU #3: thread_id=42916 (cortex-r5f) (qemu)
Quoted 7 lines
Signed-off-by Philippe Mathieu-Daudé <[email protected]>Reviewed-by Richard Henderson <[email protected]>--- qapi/machine.json | 3 +++ hw/core/machine-hmp-cmds.c | 3 ++- hw/core/machine-qmp-cmds.c | 1 + 3 files changed, 6 insertions(+), 1 deletion(-)
It's useful!
And tested on x86 platform,
PATCH v4 22/65 qapi: Move definitions related to accelerators in their own file
In reply to Philippe Mathieu-DaudéExtract TCG and KVM definitions from machine.json to accelerator.json.
--- MAINTAINERS | 1 + qapi/accelerator.json | 75 ++++++++++++++++++++++++++++++++++++++ qapi/machine.json | 65 --------------------------------- qapi/qapi-schema.json | 1 + accel/tcg/monitor.c | 2 +- hw/core/machine-hmp-cmds.c | 1 + hw/core/machine-qmp-cmds.c | 1 + qapi/meson.build | 1 + 8 files changed, 81 insertions(+), 66 deletions(-) create mode 100644 qapi/accelerator.json
MAINTAINERS +1 -0
@@ -507,6 +507,7 @@ F: accel/Makefile.objs F: accel/stubs/Makefile.objs F: cpu-common.c F: cpu-target.c +F: qapi/accelerator.json F: system/cpus.c Apple Silicon HVF CPUs
qapi/accelerator.json new file +75 -0
75 lines not on this page · raw message
qapi/machine.json +0 -65
83 lines not on this page · raw message
qapi/qapi-schema.json +1 -0
@@ -37,6 +37,7 @@ { 'include': 'run-state.json' } { 'include': 'crypto.json' } { 'include': 'job.json' } +{ 'include': 'accelerator.json' } { 'include': 'block.json' } { 'include': 'block-export.json' } { 'include': 'char.json' }
accel/tcg/monitor.c +1 -1
@@ -11,7 +11,7 @@#include "qemu/qht.h" #include "qapi/error.h" #include "qapi/type-helpers.h" -#include "qapi/qapi-commands-machine.h" +#include "qapi/qapi-commands-accelerator.h" #include "monitor/monitor.h" #include "system/cpu-timers.h" #include "exec/icount.h"
hw/core/machine-hmp-cmds.c +1 -0
@@ -18,6 +18,7 @@#include "monitor/monitor.h" #include "qapi/error.h" #include "qapi/qapi-builtin-visit.h" +#include "qapi/qapi-commands-accelerator.h" #include "qapi/qapi-commands-machine.h" #include "qobject/qdict.h" #include "qapi/string-output-visitor.h"
hw/core/machine-qmp-cmds.c +1 -0
@@ -14,6 +14,7 @@#include "hw/mem/memory-device.h" #include "qapi/error.h" #include "qapi/qapi-builtin-visit.h" +#include "qapi/qapi-commands-accelerator.h" #include "qapi/qapi-commands-machine.h" #include "qobject/qobject.h" #include "qapi/qobject-input-visitor.h"
qapi/meson.build +1 -0
@@ -57,6 +57,7 @@ qapi_all_modules = [ ] if have_system qapi_all_modules += [ + 'accelerator', 'acpi', 'audio', 'cryptodev',
Signature · 1 line
2.49.0
Re: [PATCH v4 22/65] qapi: Move definitions related to accelerators in their own file
Quoted 252 lines · Philippe Mathieu-Daudé
Extract TCG and KVM definitions from machine.json to accelerator.json.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- MAINTAINERS | 1 + qapi/accelerator.json | 75 ++++++++++++++++++++++++++++++++++++++ qapi/machine.json | 65 --------------------------------- qapi/qapi-schema.json | 1 + accel/tcg/monitor.c | 2 +- hw/core/machine-hmp-cmds.c | 1 + hw/core/machine-qmp-cmds.c | 1 + qapi/meson.build | 1 + 8 files changed, 81 insertions(+), 66 deletions(-)create mode 100644
qapi/accelerator.jsonMAINTAINERS +1
-0@@ -507,6 +507,7 @@ F: accel/Makefile.objs F: accel/stubs/Makefile.objs F: cpu-common.c F: cpu-target.c +F: qapi/accelerator.json F: system/cpus.c Apple Silicon HVF CPUsqapi/accelerator.json new file +75
-0@@ -0,0 +1,75 @@ +# -*- Mode: Python -*- +# vim: filetype=python +# +# SPDX-License-Identifier: GPL-2.0-or-later + +## +# = Accelerators +## + +{ 'include': 'common.json' } + +## +# @KvmInfo: +# +# Information about support for KVM acceleration +# +# @enabled: true if KVM acceleration is active +# +# @present: true if KVM acceleration is built into this executable +# +# Since: 0.14 +## +{ 'struct': 'KvmInfo', 'data': {'enabled': 'bool', 'present': 'bool'} } + +## +# @query-kvm: +# +# Return information about KVM acceleration +# +# Returns: @KvmInfo +# +# Since: 0.14 +# +# .. qmp-example:: +# +# -> { "execute": "query-kvm" } +# <- { "return": { "enabled": true, "present": true } } +## +{ 'command': 'query-kvm', 'returns': 'KvmInfo' } + +## +# @x-query-jit: +# +# Query TCG compiler statistics +# +# Features: +# +# @unstable: This command is meant for debugging. +# +# Returns: TCG compiler statistics +# +# Since: 6.2 +## +{ 'command': 'x-query-jit', + 'returns': 'HumanReadableText', + 'if': 'CONFIG_TCG', + 'features': [ 'unstable' ] } + +## +# @x-query-opcount: +# +# Query TCG opcode counters +# +# Features: +# +# @unstable: This command is meant for debugging. +# +# Returns: TCG opcode counters +# +# Since: 6.2 +## +{ 'command': 'x-query-opcount', + 'returns': 'HumanReadableText', + 'if': 'CONFIG_TCG', + 'features': [ 'unstable' ] }qapi/machine.json +0
-65@@ -454,35 +454,6 @@ ## { 'command': 'inject-nmi' } -## -# @KvmInfo: -# -# Information about support for KVM acceleration -# -# @enabled: true if KVM acceleration is active -# -# @present: true if KVM acceleration is built into this executable -# -# Since: 0.14 -## -{ 'struct': 'KvmInfo', 'data': {'enabled': 'bool', 'present': 'bool'} } - -## -# @query-kvm: -# -# Return information about KVM acceleration -# -# Returns: @KvmInfo -# -# Since: 0.14 -# -# .. qmp-example:: -# -# -> { "execute": "query-kvm" } -# <- { "return": { "enabled": true, "present": true } } -## -{ 'command': 'query-kvm', 'returns': 'KvmInfo' } - ## # @NumaOptionsType: #@@ -1729,24 +1700,6 @@ 'returns': 'HumanReadableText', 'features': [ 'unstable' ] } -## -# @x-query-jit: -# -# Query TCG compiler statistics -# -# Features: -# -# @unstable: This command is meant for debugging. -# -# Returns: TCG compiler statistics -# -# Since: 6.2 -## -{ 'command': 'x-query-jit', - 'returns': 'HumanReadableText', - 'if': 'CONFIG_TCG', - 'features': [ 'unstable' ] } - ## # @x-query-numa: #@@ -1764,24 +1717,6 @@ 'returns': 'HumanReadableText', 'features': [ 'unstable' ] } -## -# @x-query-opcount: -# -# Query TCG opcode counters -# -# Features: -# -# @unstable: This command is meant for debugging. -# -# Returns: TCG opcode counters -# -# Since: 6.2 -## -{ 'command': 'x-query-opcount', - 'returns': 'HumanReadableText', - 'if': 'CONFIG_TCG', - 'features': [ 'unstable' ] } - ## # @x-query-ramblock: #qapi/qapi-schema.json +1
-0@@ -37,6 +37,7 @@ { 'include': 'run-state.json' } { 'include': 'crypto.json' } { 'include': 'job.json' } +{ 'include': 'accelerator.json' } { 'include': 'block.json' } { 'include': 'block-export.json' } { 'include': 'char.json' }accel/tcg/monitor.c +1
-1@@ -11,7 +11,7 @@#include "qemu/qht.h" #include "qapi/error.h" #include "qapi/type-helpers.h" -#include "qapi/qapi-commands-machine.h" +#include "qapi/qapi-commands-accelerator.h" #include "monitor/monitor.h" #include "system/cpu-timers.h" #include "exec/icount.h" hw/core/machine-hmp-cmds.c +1
-0@@ -18,6 +18,7 @@#include "monitor/monitor.h" #include "qapi/error.h" #include "qapi/qapi-builtin-visit.h" +#include "qapi/qapi-commands-accelerator.h" #include "qapi/qapi-commands-machine.h" #include "qobject/qdict.h" #include "qapi/string-output-visitor.h" hw/core/machine-qmp-cmds.c +1
-0@@ -14,6 +14,7 @@#include "hw/mem/memory-device.h" #include "qapi/error.h" #include "qapi/qapi-builtin-visit.h" +#include "qapi/qapi-commands-accelerator.h" #include "qapi/qapi-commands-machine.h" #include "qobject/qobject.h" #include "qapi/qobject-input-visitor.h" qapi/meson.build +0
-0
qapi/meson.build qapi_all_modules = [ · line 63
Quoted 7 lines
qapi/meson.build +1
-0@@ -57,6 +57,7 @@ qapi_all_modules = [ ] if have_system qapi_all_modules += [ + 'accelerator', 'acpi', 'audio', 'cryptodev',
Good for me, in case a lower granularity (kvm, tcg, other) is needed later, it can always be modified.
Re: [PATCH v4 22/65] qapi: Move definitions related to accelerators in their own file
In reply to Philippe Mathieu-DaudéQuoted 9 lines · Philippe Mathieu-Daudé
Date: Wed, 2 Jul 2025 20:52:44 +0200
From: Philippe Mathieu-Daudé <[email protected]>
Subject: [PATCH v4 22/65] qapi: Move definitions related to accelerators in
their own file
X-Mailer: git-send-email 2.49.0Extract TCG and KVM definitions from machine.json to accelerator.json.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Quoted 11 lines
--- MAINTAINERS | 1 + qapi/accelerator.json | 75 ++++++++++++++++++++++++++++++++++++++ qapi/machine.json | 65 --------------------------------- qapi/qapi-schema.json | 1 + accel/tcg/monitor.c | 2 +- hw/core/machine-hmp-cmds.c | 1 + hw/core/machine-qmp-cmds.c | 1 + qapi/meson.build | 1 + 8 files changed, 81 insertions(+), 66 deletions(-) create mode 100644 qapi/accelerator.json
Thank you for doing this; then I could refresh the PMU filter series based on this work.
And,
Re: [PATCH v4 22/65] qapi: Move definitions related to accelerators in their own file
In reply to Philippe Mathieu-DaudéQuoted 33 lines · Philippe Mathieu-Daudé
Extract TCG and KVM definitions from machine.json to accelerator.json.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- MAINTAINERS | 1 + qapi/accelerator.json | 75 ++++++++++++++++++++++++++++++++++++++ qapi/machine.json | 65 --------------------------------- qapi/qapi-schema.json | 1 + accel/tcg/monitor.c | 2 +- hw/core/machine-hmp-cmds.c | 1 + hw/core/machine-qmp-cmds.c | 1 + qapi/meson.build | 1 + 8 files changed, 81 insertions(+), 66 deletions(-) create mode 100644 qapi/accelerator.jsonMAINTAINERS +1
-0@@ -507,6 +507,7 @@ F: accel/Makefile.objs F: accel/stubs/Makefile.objs F: cpu-common.c F: cpu-target.c +F: qapi/accelerator.json F: system/cpus.c Apple Silicon HVF CPUsqapi/accelerator.json new file +0
-0
qapi/accelerator.json line 8
Quoted 8 lines
qapi/accelerator.json new file +8
-0@@ -0,0 +1,75 @@ +# -*- Mode: Python -*- +# vim: filetype=python +# +# SPDX-License-Identifier: GPL-2.0-or-later + +## +# = Accelerators +##
Going to conflict with John Snow's "[PATCH v3 4/5] docs/sphinx: remove special parsing for freeform sections". Don't worry about it.
Quoted 162 lines
qapi/accelerator.json new file +67
-0+ +{ 'include': 'common.json' } + +## +# @KvmInfo: +# +# Information about support for KVM acceleration +# +# @enabled: true if KVM acceleration is active +# +# @present: true if KVM acceleration is built into this executable +# +# Since: 0.14 +## +{ 'struct': 'KvmInfo', 'data': {'enabled': 'bool', 'present': 'bool'} } + +## +# @query-kvm: +# +# Return information about KVM acceleration +# +# Returns: @KvmInfo +# +# Since: 0.14 +# +# .. qmp-example:: +# +# -> { "execute": "query-kvm" } +# <- { "return": { "enabled": true, "present": true } } +## +{ 'command': 'query-kvm', 'returns': 'KvmInfo' } + +## +# @x-query-jit: +# +# Query TCG compiler statistics +# +# Features: +# +# @unstable: This command is meant for debugging. +# +# Returns: TCG compiler statistics +# +# Since: 6.2 +## +{ 'command': 'x-query-jit', + 'returns': 'HumanReadableText', + 'if': 'CONFIG_TCG', + 'features': [ 'unstable' ] } + +## +# @x-query-opcount: +# +# Query TCG opcode counters +# +# Features: +# +# @unstable: This command is meant for debugging. +# +# Returns: TCG opcode counters +# +# Since: 6.2 +## +{ 'command': 'x-query-opcount', + 'returns': 'HumanReadableText', + 'if': 'CONFIG_TCG', + 'features': [ 'unstable' ] }qapi/machine.json +0
-65@@ -454,35 +454,6 @@ ## { 'command': 'inject-nmi' } -## -# @KvmInfo: -# -# Information about support for KVM acceleration -# -# @enabled: true if KVM acceleration is active -# -# @present: true if KVM acceleration is built into this executable -# -# Since: 0.14 -## -{ 'struct': 'KvmInfo', 'data': {'enabled': 'bool', 'present': 'bool'} } - -## -# @query-kvm: -# -# Return information about KVM acceleration -# -# Returns: @KvmInfo -# -# Since: 0.14 -# -# .. qmp-example:: -# -# -> { "execute": "query-kvm" } -# <- { "return": { "enabled": true, "present": true } } -## -{ 'command': 'query-kvm', 'returns': 'KvmInfo' } - ## # @NumaOptionsType: #@@ -1729,24 +1700,6 @@ 'returns': 'HumanReadableText', 'features': [ 'unstable' ] } -## -# @x-query-jit: -# -# Query TCG compiler statistics -# -# Features: -# -# @unstable: This command is meant for debugging. -# -# Returns: TCG compiler statistics -# -# Since: 6.2 -## -{ 'command': 'x-query-jit', - 'returns': 'HumanReadableText', - 'if': 'CONFIG_TCG', - 'features': [ 'unstable' ] } - ## # @x-query-numa: #@@ -1764,24 +1717,6 @@ 'returns': 'HumanReadableText', 'features': [ 'unstable' ] } -## -# @x-query-opcount: -# -# Query TCG opcode counters -# -# Features: -# -# @unstable: This command is meant for debugging. -# -# Returns: TCG opcode counters -# -# Since: 6.2 -## -{ 'command': 'x-query-opcount', - 'returns': 'HumanReadableText', - 'if': 'CONFIG_TCG', - 'features': [ 'unstable' ] } - ## # @x-query-ramblock: #qapi/qapi-schema.json +0
-0
qapi/qapi-schema.json line 43
Quoted 7 lines
qapi/qapi-schema.json +1
-0@@ -37,6 +37,7 @@ { 'include': 'run-state.json' } { 'include': 'crypto.json' } { 'include': 'job.json' } +{ 'include': 'accelerator.json' } { 'include': 'block.json' } { 'include': 'block-export.json' } { 'include': 'char.json' }
This puts the new section "Accelerators" between "Background jobs" and "Block devices". Feels arbitrary. Much of the existing order does. Would it fit better next to "Machines"?
Quoted 30 lines
accel/tcg/monitor.c +1
-1@@ -11,7 +11,7 @@#include "qemu/qht.h" #include "qapi/error.h" #include "qapi/type-helpers.h" -#include "qapi/qapi-commands-machine.h" +#include "qapi/qapi-commands-accelerator.h" #include "monitor/monitor.h" #include "system/cpu-timers.h" #include "exec/icount.h" hw/core/machine-hmp-cmds.c +1
-0@@ -18,6 +18,7 @@#include "monitor/monitor.h" #include "qapi/error.h" #include "qapi/qapi-builtin-visit.h" +#include "qapi/qapi-commands-accelerator.h" #include "qapi/qapi-commands-machine.h" #include "qobject/qdict.h" #include "qapi/string-output-visitor.h" hw/core/machine-qmp-cmds.c +0
-0
hw/core/machine-qmp-cmds.c line 20
Quoted 7 lines
hw/core/machine-qmp-cmds.c +1
-0@@ -14,6 +14,7 @@#include "hw/mem/memory-device.h" #include "qapi/error.h" #include "qapi/qapi-builtin-visit.h" +#include "qapi/qapi-commands-accelerator.h" #include "qapi/qapi-commands-machine.h" #include "qobject/qobject.h" #include "qapi/qobject-input-visitor.h"
Have you considered extracting the accelerator command code to accel/accel-qmp-cmds.c and accel/accel-hmp-cmds.c?
Quoted 12 lines
qapi/meson.build +1
-0@@ -57,6 +57,7 @@ qapi_all_modules = [ ] if have_system qapi_all_modules += [ + 'accelerator', 'acpi', 'audio', 'cryptodev',
PATCH v4 23/65 accel/system: Introduce @x-accel-stats QMP command
In reply to Philippe Mathieu-DaudéUnstable QMP 'x-accel-stats' dispatches to the AccelOpsClass::get_stats() and get_vcpu_stats() handlers.
--- qapi/accelerator.json | 17 +++++++++++++++++ include/qemu/accel.h | 2 ++ include/system/accel-ops.h | 3 +++ accel/accel-qmp.c | 34 ++++++++++++++++++++++++++++++++++ accel/accel-system.c | 1 + accel/meson.build | 2 +- 6 files changed, 58 insertions(+), 1 deletion(-) create mode 100644 accel/accel-qmp.c
qapi/accelerator.json +17 -0
@@ -73,3 +73,20 @@ 'returns': 'HumanReadableText', 'if': 'CONFIG_TCG', 'features': [ 'unstable' ] } + +## +# @x-accel-stats: +# +# Query accelerator statistics +# +# Features: +# +# @unstable: This command is meant for debugging. +# +# Returns: accelerator statistics +# +# Since: 10.1 +## +{ 'command': 'x-accel-stats', + 'returns': 'HumanReadableText', + 'features': [ 'unstable' ] }
include/qemu/accel.h +2 -0
@@ -41,6 +41,8 @@ typedef struct AccelClass {AccelOpsClass *ops;int (*init_machine)(AccelState *as,MachineState *ms); +/* get_stats: Append statistics to @buf */ +void (*get_stats)(AccelState *as,GString *buf);/* system related hooks */ void (*setup_post)(AccelState *as);
include/system/accel-ops.h +3 -0
@@ -50,6 +50,9 @@ struct AccelOpsClass {void (*handle_interrupt)(CPUState *cpu,int mask); +/* get_vcpu_stats: Append statistics of this @cpu to @buf */ +void (*get_vcpu_stats)(CPUState *cpu,GString *buf); +/** * @get_virtual_clock: fetch virtual clock * @set_virtual_clock: set virtual clock
accel/accel-qmp.c new file +34 -0
@@ -0,0 +1,34 @@ +/* +* QMP commands related to accelerators +* +* Copyright (c) Linaro +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#include "qemu/osdep.h" +#include "qemu/accel.h" +#include "qapi/type-helpers.h" +#include "qapi/qapi-commands-accelerator.h" +#include "system/accel-ops.h" +#include "hw/core/cpu.h" + +HumanReadableText *qmp_x_accel_stats (Error **errp) +{ +AccelState *accel =current_accel (); +AccelClass *acc =ACCEL_GET_CLASS (accel); +g_autoptr (GString) buf =g_string_new ("" ); + +if (acc->get_stats) { + acc->get_stats (accel, buf); + } +if (acc->ops->get_vcpu_stats) { +CPUState *cpu; + +CPU_FOREACH (cpu) { + acc->ops->get_vcpu_stats (cpu, buf); + } + } + +return human_readable_text_from_str (buf); +}
accel/accel-system.c +1 -0
@@ -26,6 +26,7 @@#include "qemu/osdep.h" #include "qemu/accel.h" #include "hw/boards.h" +#include "hw/core/cpu.h" #include "system/accel-ops.h" #include "system/cpus.h" #include "qemu/error-report.h"
accel/meson.build +1 -1
@@ -1,6 +1,6 @@ common_ss.add(files('accel-common.c')) specific_ss.add(files('accel-target.c')) -system_ss.add(files('accel-system.c', 'accel-blocker.c')) +system_ss.add(files('accel-system.c', 'accel-blocker.c', 'accel-qmp.c')) user_ss.add(files('accel-user.c')) subdir('tcg')
Signature · 1 line
2.49.0
Re: [PATCH v4 23/65] accel/system: Introduce @x-accel-stats QMP command
Quoted 12 lines · Philippe Mathieu-Daudé
Unstable QMP 'x-accel-stats' dispatches to the
AccelOpsClass::get_stats()andget_vcpu_stats()handlers.Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- qapi/accelerator.json | 17 +++++++++++++++++ include/qemu/accel.h | 2 ++ include/system/accel-ops.h | 3 +++ accel/accel-qmp.c | 34 ++++++++++++++++++++++++++++++++++ accel/accel-system.c | 1 + accel/meson.build | 2 +- 6 files changed, 58 insertions(+), 1 deletion(-)
Quoted 1 line
create mode 100644
accel/accel-qmp.c
Re: [PATCH v4 23/65] accel/system: Introduce @x-accel-stats QMP command
In reply to Philippe Mathieu-DaudéQuoted 9 lines · Philippe Mathieu-Daudé
Date: Wed, 2 Jul 2025 20:52:45 +0200
From: Philippe Mathieu-Daudé <[email protected]>
Subject: [PATCH v4 23/65] accel/system: Introduce @x-accel-stats QMP command
X-Mailer: git-send-email 2.49.0Unstable QMP 'x-accel-stats' dispatches to the
AccelOpsClass::get_stats()andget_vcpu_stats()handlers.Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Quoted 9 lines
--- qapi/accelerator.json | 17 +++++++++++++++++ include/qemu/accel.h | 2 ++ include/system/accel-ops.h | 3 +++ accel/accel-qmp.c | 34 ++++++++++++++++++++++++++++++++++ accel/accel-system.c | 1 + accel/meson.build | 2 +- 6 files changed, 58 insertions(+), 1 deletion(-) create mode 100644 accel/accel-qmp.c
Re: [PATCH v4 23/65] accel/system: Introduce @x-accel-stats QMP command
In reply to Philippe Mathieu-DaudéQuoted 4 lines · Philippe Mathieu-Daudé
Unstable QMP 'x-accel-stats' dispatches to the
AccelOpsClass::get_stats()andget_vcpu_stats()handlers.Signed-off-by Philippe Mathieu-Daudé <[email protected]>
PATCH v4 24/65 accel/system: Add 'info accel' on human monitor
In reply to Philippe Mathieu-Daudé'info accel' dispatches to the AccelOpsClass::get_stats() and get_vcpu_stats() handlers.
--- accel/accel-system.c | 8 ++++++++ hmp-commands-info.hx | 12 ++++++++++++ 2 files changed, 20 insertions(+)
accel/accel-system.c +8 -0
@@ -25,6 +25,8 @@#include "qemu/osdep.h" #include "qemu/accel.h" +#include "qapi/qapi-commands-accelerator.h" +#include "monitor/monitor.h" #include "hw/boards.h" #include "hw/core/cpu.h" #include "system/accel-ops.h"
@@ -112,11 +114,17 @@ void accel_init_ops_interfaces(AccelClass *ac)cpus_register_accel (ops); } +static void accel_ops_class_init (ObjectClass *oc,const void *data) +{ +monitor_register_hmp_info_hrt ("accel" , qmp_x_accel_stats); +} +static const TypeInfo accel_ops_type_info = { .name =TYPE_ACCEL_OPS , .parent =TYPE_OBJECT , .abstract = true, .class_size =sizeof (AccelOpsClass), + .class_init = accel_ops_class_init, };static void accel_system_register_types (void )
hmp-commands-info.hx +12 -0
@@ -281,6 +281,18 @@ ERST .cmd = hmp_info_sync_profile, }, + { + .name = "accel", + .args_type = "", + .params = "", + .help = "show accelerator info", + }, + +SRST + ``info accel`` + Show accelerator info. +ERST + SRST ``info sync-profile [-m|-n]`` [*max*] Show synchronization profiling info, up to *max* entries (default: 10),
Signature · 1 line
2.49.0
Re: [PATCH v4 24/65] accel/system: Add 'info accel' on human monitor
Quoted 9 lines · Philippe Mathieu-Daudé
'info accel' dispatches to the
AccelOpsClass::get_stats()andget_vcpu_stats()handlers.Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- accel/accel-system.c | 8 ++++++++ hmp-commands-info.hx | 12 ++++++++++++ 2 files changed, 20 insertions(+)
PATCH v4 25/65 accel/tcg: Factor tcg_dump_flush_info() out
In reply to Philippe Mathieu-Daudé--- accel/tcg/internal-common.h | 2 ++ accel/tcg/monitor.c | 27 +++++++++++++++++---------- 2 files changed, 19 insertions(+), 10 deletions(-)
accel/tcg/internal-common.h +2 -0
@@ -139,4 +139,6 @@ G_NORETURN void cpu_io_recompile(CPUState *cpu, uintptr_t retaddr);void tb_phys_invalidate (TranslationBlock *tb,tb_page_addr_t page_addr);void tb_set_jmp_target (TranslationBlock *tb,int n,uintptr_t addr); +void tcg_dump_flush_info (GString *buf); +#endif
accel/tcg/monitor.c +17 -10
@@ -146,11 +146,26 @@ static void tcg_dump_info(GString *buf)g_string_append_printf (buf,"[TCG profiler not compiled]\n" ); } +void tcg_dump_flush_info (GString *buf) +{ +size_t flush_full, flush_part, flush_elide; + +g_string_append_printf (buf,"TB flush count %u\n" , +qatomic_read (&tb_ctx.tb_flush_count)); +g_string_append_printf (buf,"TB invalidate count %u\n" , +qatomic_read (&tb_ctx.tb_phys_invalidate_count)); + +tlb_flush_counts (&flush_full, &flush_part, &flush_elide); +g_string_append_printf (buf,"TLB full flushes %zu\n" , flush_full); +g_string_append_printf (buf,"TLB partial flushes %zu\n" , flush_part); +g_string_append_printf (buf,"TLB elided flushes %zu\n" , flush_elide); +} +static void dump_exec_info (GString *buf) {struct tb_tree_stats tst = {};struct qht_stats hst; -size_t nb_tbs, flush_full, flush_part, flush_elide; +size_t nb_tbs;tcg_tb_foreach (tb_tree_stats_iter, &tst); nb_tbs = tst.nb_tbs;
@@ -187,15 +202,7 @@ static void dump_exec_info(GString *buf)qht_statistics_destroy (&hst);g_string_append_printf (buf,"\nStatistics:\n" ); -g_string_append_printf (buf,"TB flush count %u\n" , -qatomic_read (&tb_ctx.tb_flush_count)); -g_string_append_printf (buf,"TB invalidate count %u\n" , -qatomic_read (&tb_ctx.tb_phys_invalidate_count)); - -tlb_flush_counts (&flush_full, &flush_part, &flush_elide); -g_string_append_printf (buf,"TLB full flushes %zu\n" , flush_full); -g_string_append_printf (buf,"TLB partial flushes %zu\n" , flush_part); -g_string_append_printf (buf,"TLB elided flushes %zu\n" , flush_elide); +tcg_dump_flush_info (buf);tcg_dump_info (buf); }
Signature · 1 line
2.49.0
PATCH v4 26/65 accel/tcg: Implement get_[vcpu]_stats()
In reply to Philippe Mathieu-Daudé--- accel/tcg/tcg-all.c | 6 ++++++ 1 file changed, 6 insertions(+)
accel/tcg/tcg-all.c +6 -0
@@ -239,11 +239,17 @@ static int tcg_gdbstub_supported_sstep_flags(AccelState *as) } } +static void tcg_get_stats (AccelState *as,GString *buf) +{ +tcg_dump_flush_info (buf); +} +static void tcg_accel_class_init (ObjectClass *oc,const void *data) {AccelClass *ac =ACCEL_CLASS (oc); ac->name ="tcg" ; ac->init_machine = tcg_init_machine; + ac->get_stats = tcg_get_stats; ac->allowed = &tcg_allowed; ac->supports_guest_debug = tcg_supports_guest_debug; ac->gdbstub_supported_sstep_flags = tcg_gdbstub_supported_sstep_flags;
Signature · 1 line
2.49.0
Re: [PATCH v4 26/65] accel/tcg: Implement get_[vcpu]_stats()
[It seems my previous reply was missing in mail list. If repetitive,
please ignore it. :-) ]
Hi Philippe,
Quoted 16 lines · Philippe Mathieu-Daudé
Date: Wed, 2 Jul 2025 20:52:48 +0200
From: Philippe Mathieu-Daudé <[email protected]>
Subject: [PATCH v4 26/65] accel/tcg: Implement get_[vcpu]_stats()
X-Mailer: git-send-email 2.49.0Signed-off-by Philippe Mathieu-Daudé <[email protected]>Reviewed-by Richard Henderson <[email protected]>--- accel/tcg/tcg-all.c | 6 ++++++ 1 file changed, 6 insertions(+)accel/tcg/tcg-all.c +0
-0
accel/tcg/tcg-all.c static int tcg_gdbstub_supported_sstep_flags(AccelState *as) · line 246
Quoted 8 lines
accel/tcg/tcg-all.c +5
-0@@ -239,11 +239,17 @@ static int tcg_gdbstub_supported_sstep_flags(AccelState *as) } } +static void tcg_get_stats (AccelState *as,GString *buf) +{ +tcg_dump_flush_info (buf); +} +
With:
./configure
make -j
I met the error:
/usr/bin/ld: libuser.a.p/accel_tcg_tcg-all.c.o: in function `tcg_get_stats':
/qemu/build/../accel/tcg/tcg-all.c:244: undefined reference to `tcg_dump_flush_info'
It seems tcg_dump_flush_info() needs a stub?
Thanks,
Zhao
Re: [PATCH v4 26/65] accel/tcg: Implement get_[vcpu]_stats()
In reply to Philippe Mathieu-DaudéQuoted 11 lines · Philippe Mathieu-Daudé
Signed-off-by Philippe Mathieu-Daudé <[email protected]>Reviewed-by Richard Henderson <[email protected]>--- accel/tcg/tcg-all.c | 6 ++++++ 1 file changed, 6 insertions(+)accel/tcg/tcg-all.c +0
-0
accel/tcg/tcg-all.c static int tcg_gdbstub_supported_sstep_flags(AccelState *as) · line 244
Quoted 6 lines
accel/tcg/tcg-all.c +3
-0@@ -239,11 +239,17 @@ static int tcg_gdbstub_supported_sstep_flags(AccelState *as) } } +static void tcg_get_stats (AccelState *as,GString *buf) +{ +tcg_dump_flush_info (buf);
This is failing in linux-user because we don't have a monitor:
/usr/bin/ld: libuser.a.p/accel_tcg_tcg-all.c.o: in function `tcg_get_stats':
/home/alex/lsrc/qemu.git/builds/all/../../accel/tcg/tcg-all.c:244:(.text+0x194): undefined reference to `tcg_dump_flush_info'
collect2: error: ld returned 1 exit status
Signature · 2 lines
Alex Bennée Virtualisation Tech Lead @ Linaro
Re: [PATCH v4 26/65] accel/tcg: Implement get_[vcpu]_stats()
Quoted 22 lines · Alex Bennée
Quoted 11 lines · Philippe Mathieu-Daudé
Signed-off-by Philippe Mathieu-Daudé <[email protected]>Reviewed-by Richard Henderson <[email protected]>--- accel/tcg/tcg-all.c | 6 ++++++ 1 file changed, 6 insertions(+)accel/tcg/tcg-all.c +0
-0accel/tcg/tcg-all.c static int tcg_gdbstub_supported_sstep_flags(AccelState *as) · line 244
Quoted 6 lines
accel/tcg/tcg-all.c +3
-0@@ -239,11 +239,17 @@ static int tcg_gdbstub_supported_sstep_flags(AccelState *as) } } +static void tcg_get_stats (AccelState *as,GString *buf) +{ +tcg_dump_flush_info (buf);This is failing in linux-user because we don't have a monitor:
Quoted 3 lines
/usr/bin/ld:libuser.a.p/accel_tcg_tcg-all.c.o: in function `tcg_get_stats':
/home/alex/lsrc/qemu.git/builds/all/../../accel/tcg/tcg-all.c:244:(.text+0x194): undefined reference to `tcg_dump_flush_info'
collect2: error: ld returned 1 exit status
(reported by Zhao and fixed in v5)
PATCH v4 27/65 accel/hvf: Implement get_vcpu_stats()
In reply to Philippe Mathieu-Daudé--- accel/hvf/hvf-accel-ops.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
accel/hvf/hvf-accel-ops.c +19 -0
@@ -358,6 +358,12 @@ static inline int hvf_gdbstub_sstep_flags(AccelState *as)return SSTEP_ENABLE |SSTEP_NOIRQ ; } +static void do_hvf_get_vcpu_exec_time (CPUState *cpu,run_on_cpu_data arg) +{ +int r =hv_vcpu_get_exec_time (cpu->accel->fd, arg.host_ptr); +assert_hvf_ok (r); +} +static void hvf_accel_class_init (ObjectClass *oc,const void *data) {AccelClass *ac =ACCEL_CLASS (oc);
@@ -583,6 +589,16 @@ static void hvf_remove_all_breakpoints(CPUState *cpu) } } +static void hvf_get_vcpu_stats (CPUState *cpu,GString *buf) +{ +uint64_t time_us;/* units of mach_absolute_time() */ + +run_on_cpu (cpu, do_hvf_get_vcpu_exec_time,RUN_ON_CPU_HOST_PTR (&time_us)); + +g_string_append_printf (buf,"HVF cumulative execution time: %llu.%.3llus\n" , + time_us /1000000 , (time_us %1000000 ) /1000 ); +} +static void hvf_accel_ops_class_init (ObjectClass *oc,const void *data) {AccelOpsClass *ops =ACCEL_OPS_CLASS (oc);
@@ -601,7 +617,10 @@ static void hvf_accel_ops_class_init(ObjectClass *oc, const void *data) ops->remove_breakpoint = hvf_remove_breakpoint; ops->remove_all_breakpoints = hvf_remove_all_breakpoints; ops->update_guest_debug = hvf_update_guest_debug; + + ops->get_vcpu_stats = hvf_get_vcpu_stats; }; +static const TypeInfo hvf_accel_ops_type = { .name =ACCEL_OPS_NAME ("hvf" ),
Signature · 1 line
2.49.0
Re: [PATCH v4 27/65] accel/hvf: Implement get_vcpu_stats()
Quoted 57 lines · Philippe Mathieu-Daudé
Signed-off-by Philippe Mathieu-Daudé <[email protected]>Reviewed-by Richard Henderson <[email protected]>---
accel/hvf/hvf-accel-ops.c| 19 +++++++++++++++++++1 file changed, 19 insertions(+)accel/hvf/hvf-accel-ops.c +19
-0@@ -358,6 +358,12 @@ static inline int hvf_gdbstub_sstep_flags(AccelState *as)return SSTEP_ENABLE |SSTEP_NOIRQ ; } +static void do_hvf_get_vcpu_exec_time (CPUState *cpu,run_on_cpu_data arg) +{ +int r =hv_vcpu_get_exec_time (cpu->accel->fd, arg.host_ptr); +assert_hvf_ok (r); +} +static void hvf_accel_class_init (ObjectClass *oc,const void *data) {AccelClass *ac =ACCEL_CLASS (oc);@@ -583,6 +589,16 @@ static void hvf_remove_all_breakpoints(CPUState *cpu) } } +static void hvf_get_vcpu_stats (CPUState *cpu,GString *buf) +{ +uint64_t time_us;/* units of mach_absolute_time() */ + +run_on_cpu (cpu, do_hvf_get_vcpu_exec_time,RUN_ON_CPU_HOST_PTR (&time_us)); + +g_string_append_printf (buf,"HVF cumulative execution time: %llu.%.3llus\n" , + time_us /1000000 , (time_us %1000000 ) /1000 ); +} +static void hvf_accel_ops_class_init (ObjectClass *oc,const void *data) {AccelOpsClass *ops =ACCEL_OPS_CLASS (oc);@@ -601,7 +617,10 @@ static void hvf_accel_ops_class_init(ObjectClass *oc, const void *data) ops->remove_breakpoint = hvf_remove_breakpoint; ops->remove_all_breakpoints = hvf_remove_all_breakpoints; ops->update_guest_debug = hvf_update_guest_debug; + + ops->get_vcpu_stats = hvf_get_vcpu_stats; }; +static const TypeInfo hvf_accel_ops_type = { .name =ACCEL_OPS_NAME ("hvf" ),Signature · 1 line
2.49.0
This doesn't return the right time for me (M3 Pro). If you tested on Intel, it might have a different time scale for mach units?
This is what I needed to change to make it work. Tested with 'yes > /dev/null' in the guest and 'info accel' in monitor.
accel/hvf/hvf-accel-ops.c +8 -3
@@ -59,6 +59,7 @@#include "system/hvf.h" #include "system/hvf_int.h" #include "hw/core/cpu.h" +#include <mach/mach_time.h> HVFState *hvf_state;
@@ -340,12 +341,16 @@ static void hvf_remove_all_breakpoints(CPUState *cpu)static void hvf_get_vcpu_stats (CPUState *cpu,GString *buf) { -uint64_t time_us;/* units of mach_absolute_time() */ +uint64_t time_mach;/* units of mach_absolute_time() */ -run_on_cpu (cpu, do_hvf_get_vcpu_exec_time,RUN_ON_CPU_HOST_PTR (&time_us)); +run_on_cpu (cpu, do_hvf_get_vcpu_exec_time,RUN_ON_CPU_HOST_PTR (&time_mach)); + +mach_timebase_info_data_t timebase; +mach_timebase_info (&timebase); +uint64_t time_ns = time_mach * timebase.numer / timebase.denom;g_string_append_printf (buf,"HVF cumulative execution time: %llu.%.3llus\n" , - time_us /1000000 , (time_us %1000000 ) /1000 ); + time_ns /1000000000 , (time_ns %1000000000 ) /1000000 ); }static void hvf_accel_ops_class_init (ObjectClass *oc,const void *data)
Re: [PATCH v4 27/65] accel/hvf: Implement get_vcpu_stats()
Quoted 78 lines · Mads Ynddal
Quoted 57 lines · Philippe Mathieu-Daudé
Signed-off-by Philippe Mathieu-Daudé <[email protected]>Reviewed-by Richard Henderson <[email protected]>---
accel/hvf/hvf-accel-ops.c| 19 +++++++++++++++++++1 file changed, 19 insertions(+)accel/hvf/hvf-accel-ops.c +19
-0@@ -358,6 +358,12 @@ static inline int hvf_gdbstub_sstep_flags(AccelState *as)return SSTEP_ENABLE |SSTEP_NOIRQ ; } +static void do_hvf_get_vcpu_exec_time (CPUState *cpu,run_on_cpu_data arg) +{ +int r =hv_vcpu_get_exec_time (cpu->accel->fd, arg.host_ptr); +assert_hvf_ok (r); +} +static void hvf_accel_class_init (ObjectClass *oc,const void *data) {AccelClass *ac =ACCEL_CLASS (oc);@@ -583,6 +589,16 @@ static void hvf_remove_all_breakpoints(CPUState *cpu) } } +static void hvf_get_vcpu_stats (CPUState *cpu,GString *buf) +{ +uint64_t time_us;/* units of mach_absolute_time() */ + +run_on_cpu (cpu, do_hvf_get_vcpu_exec_time,RUN_ON_CPU_HOST_PTR (&time_us)); + +g_string_append_printf (buf,"HVF cumulative execution time: %llu.%.3llus\n" , + time_us /1000000 , (time_us %1000000 ) /1000 ); +} +static void hvf_accel_ops_class_init (ObjectClass *oc,const void *data) {AccelOpsClass *ops =ACCEL_OPS_CLASS (oc);@@ -601,7 +617,10 @@ static void hvf_accel_ops_class_init(ObjectClass *oc, const void *data) ops->remove_breakpoint = hvf_remove_breakpoint; ops->remove_all_breakpoints = hvf_remove_all_breakpoints; ops->update_guest_debug = hvf_update_guest_debug; + + ops->get_vcpu_stats = hvf_get_vcpu_stats; }; +static const TypeInfo hvf_accel_ops_type = { .name =ACCEL_OPS_NAME ("hvf" ),Signature · 1 line
2.49.0This doesn't return the right time for me (M3 Pro). If you tested on Intel, it might have a different time scale for mach units?
This is what I needed to change to make it work. Tested with 'yes >
/dev/null' in the guest and 'info accel' in monitor.accel/hvf/hvf-accel-ops.c +1
-0@@ -59,6 +59,7 @@#include "system/hvf.h" #include "system/hvf_int.h" #include "hw/core/cpu.h" +#include <mach/mach_time.h> HVFState *hvf_state;@@ -340,12 +341,16 @@ static void hvf_remove_all_breakpoints(CPUState *cpu)static void hvf_get_vcpu_stats (CPUState *cpu,GString *buf)
accel/hvf/hvf-accel-ops.c static void hvf_remove_all_breakpoints(CPUState *cpu) · line 350
Quoted 10 lines
accel/hvf/hvf-accel-ops.c +6
-2{ -uint64_t time_us;/* units of mach_absolute_time() */ +uint64_t time_mach;/* units of mach_absolute_time() */ -run_on_cpu (cpu, do_hvf_get_vcpu_exec_time,RUN_ON_CPU_HOST_PTR (&time_us)); +run_on_cpu (cpu, do_hvf_get_vcpu_exec_time,RUN_ON_CPU_HOST_PTR (&time_mach)); + +mach_timebase_info_data_t timebase; +mach_timebase_info (&timebase); +uint64_t time_ns = time_mach * timebase.numer / timebase.denom;
Great, thank you! That works for me :)
Quoted 9 lines
accel/hvf/hvf-accel-ops.c +1
-1g_string_append_printf (buf,"HVF cumulative execution time: %llu.%.3llus\n" , - time_us /1000000 , (time_us %1000000 ) /1000 ); + time_ns /1000000000 , (time_ns %1000000000 ) /1000000 ); }static void hvf_accel_ops_class_init (ObjectClass *oc,const void *data)
PATCH v4 28/65 accel/hvf: Report missing com.apple.security.hypervisor entitlement
In reply to Philippe Mathieu-DaudéWe need the QEMU binary signed to be able to use HVF. Improve the following:
$ ./qemu-system-aarch64-unsigned -M virt -accel hvf qemu-system-aarch64-unsigned: -accel hvf: Error: ret = HV_DENIED (0xfae94007, at ../../accel/hvf/hvf-accel-ops.c:339) Abort trap: 6
to:
$ ./qemu-system-aarch64-unsigned -M virt -accel hvf qemu-system-aarch64-unsigned: -accel hvf: Could not access HVF. Is the executable signed with com.apple.security.hypervisor entitlement?
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2800
--- accel/hvf/hvf-accel-ops.c | 5 +++++ 1 file changed, 5 insertions(+)
accel/hvf/hvf-accel-ops.c +5 -0
@@ -337,6 +337,11 @@ static int hvf_accel_init(AccelState *as, MachineState *ms) } ret =hvf_arch_vm_create (ms, (uint32_t )pa_range); +if (ret ==HV_DENIED ) { +error_report ("Could not access HVF. Is the executable signed" +" with com.apple.security.hypervisor entitlement?" ); +exit (1 ); + }assert_hvf_ok (ret); s->num_slots =ARRAY_SIZE (s->slots);
Signature · 1 line
2.49.0
Re: [PATCH v4 28/65] accel/hvf: Report missing com.apple.security.hypervisor entitlement
Quoted 12 lines · Philippe Mathieu-Daudé
We need the QEMU binary signed to be able to use HVF. Improve the following:
$ ./qemu-system-aarch64-unsigned -M virt -accel hvf qemu-system-aarch64-unsigned: -accel hvf: Error: ret = HV_DENIED (0xfae94007, at ../../accel/hvf/hvf-accel-ops.c:339) Abort trap: 6to:
$ ./qemu-system-aarch64-unsigned -M virt -accel hvf qemu-system-aarch64-unsigned: -accel hvf: Could not access HVF. Is the executable signed with com.apple.security.hypervisor entitlement?
Quoted 7 lines
Suggested-by Shatyuka <[email protected]>Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2800
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- accel/hvf/hvf-accel-ops.c | 5 +++++ 1 file changed, 5 insertions(+)
Re: [PATCH v4 28/65] accel/hvf: Report missing com.apple.security.hypervisor entitlement
In reply to Philippe Mathieu-DaudéQuoted 15 lines · Philippe Mathieu-Daudé
We need the QEMU binary signed to be able to use HVF. Improve the following:
$ ./qemu-system-aarch64-unsigned -M virt -accel hvf qemu-system-aarch64-unsigned: -accel hvf: Error: ret = HV_DENIED (0xfae94007, at ../../accel/hvf/hvf-accel-ops.c:339) Abort trap: 6to:
$ ./qemu-system-aarch64-unsigned -M virt -accel hvf qemu-system-aarch64-unsigned: -accel hvf: Could not access HVF. Is the executable signed with com.apple.security.hypervisor entitlement?
Quoted 8 lines
Suggested-by Shatyuka <[email protected]>Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2800
Signed-off-by Philippe Mathieu-Daudé <[email protected]>---
accel/hvf/hvf-accel-ops.c| 5 +++++1 file changed, 5 insertions(+)
PATCH v4 29/65 accel/hvf: Restrict internal declarations
In reply to Philippe Mathieu-DaudéCommon code only needs to know whether HVF is enabled and the QOM type. Move the rest to "hvf_int.h", removing the need for COMPILING_PER_TARGET #ifdef'ry.
--- include/system/hvf.h | 41 ---------------------------------------- include/system/hvf_int.h | 36 +++++++++++++++++++++++++++++++++++ 2 files changed, 36 insertions(+), 41 deletions(-)
include/system/hvf.h +0 -41
@@ -14,10 +14,6 @@#define HVF_H #include "qemu/accel.h" -#include "qemu/queue.h" -#include "exec/vaddr.h" -#include "qom/object.h" -#include "exec/vaddr.h" #ifdef COMPILING_PER_TARGET # ifdef CONFIG_HVF
@@ -40,41 +36,4 @@ typedef struct HVFState HVFState;DECLARE_INSTANCE_CHECKER (HVFState,HVF_STATE , TYPE_HVF_ACCEL) -#ifdef COMPILING_PER_TARGET -struct hvf_sw_breakpoint { -vaddr pc; -vaddr saved_insn; -int use_count; -QTAILQ_ENTRY (hvf_sw_breakpoint) entry; -}; - -struct hvf_sw_breakpoint *hvf_find_sw_breakpoint (CPUState *cpu, -vaddr pc); -int hvf_sw_breakpoints_active (CPUState *cpu); - -int hvf_arch_insert_sw_breakpoint (CPUState *cpu,struct hvf_sw_breakpoint *bp); -int hvf_arch_remove_sw_breakpoint (CPUState *cpu,struct hvf_sw_breakpoint *bp); -int hvf_arch_insert_hw_breakpoint (vaddr addr,vaddr len,int type); -int hvf_arch_remove_hw_breakpoint (vaddr addr,vaddr len,int type); -void hvf_arch_remove_all_hw_breakpoints (void ); - -/* -* hvf_update_guest_debug: -* @cs: CPUState for the CPU to update -* -* Update guest to enable or disable debugging. Per-arch specifics will be -* handled by calling down to hvf_arch_update_guest_debug. -*/ -int hvf_update_guest_debug (CPUState *cpu); -void hvf_arch_update_guest_debug (CPUState *cpu); - -/* -* Return whether the guest supports debugging. -*/ -bool hvf_arch_supports_guest_debug (AccelState *as); - -bool hvf_arch_cpu_realize (CPUState *cpu,Error **errp); - -#endif /* COMPILING_PER_TARGET */ -#endif
include/system/hvf_int.h +36 -0
@@ -12,6 +12,8 @@#define HVF_INT_H #include "qemu/queue.h" +#include "exec/vaddr.h" +#include "qom/object.h" #ifdef __aarch64__#include <Hypervisor/Hypervisor.h>
@@ -77,4 +79,38 @@ int hvf_put_registers(CPUState *);int hvf_get_registers (CPUState *);void hvf_kick_vcpu_thread (CPUState *cpu); +struct hvf_sw_breakpoint { +vaddr pc; +vaddr saved_insn; +int use_count; +QTAILQ_ENTRY (hvf_sw_breakpoint) entry; +}; + +struct hvf_sw_breakpoint *hvf_find_sw_breakpoint (CPUState *cpu, +vaddr pc); +int hvf_sw_breakpoints_active (CPUState *cpu); + +int hvf_arch_insert_sw_breakpoint (CPUState *cpu,struct hvf_sw_breakpoint *bp); +int hvf_arch_remove_sw_breakpoint (CPUState *cpu,struct hvf_sw_breakpoint *bp); +int hvf_arch_insert_hw_breakpoint (vaddr addr,vaddr len,int type); +int hvf_arch_remove_hw_breakpoint (vaddr addr,vaddr len,int type); +void hvf_arch_remove_all_hw_breakpoints (void ); + +/* +* hvf_update_guest_debug: +* @cs: CPUState for the CPU to update +* +* Update guest to enable or disable debugging. Per-arch specifics will be +* handled by calling down to hvf_arch_update_guest_debug. +*/ +int hvf_update_guest_debug (CPUState *cpu); +void hvf_arch_update_guest_debug (CPUState *cpu); + +/* +* Return whether the guest supports debugging. +*/ +bool hvf_arch_supports_guest_debug (AccelState *as); + +bool hvf_arch_cpu_realize (CPUState *cpu,Error **errp); +#endif
Signature · 1 line
2.49.0
PATCH v4 30/65 accel/hvf: Move per-cpu method declarations to hvf-accel-ops.c
In reply to Philippe Mathieu-Daudéhvf-all.c aims to contain the generic accel methods (TYPE_ACCEL), while hvf-accel-ops.c the per-vcpu methods (TYPE_ACCEL_OPS).
--- accel/hvf/hvf-accel-ops.c | 29 +++++++++++++++++++++++++++++ accel/hvf/hvf-all.c | 29 ----------------------------- 2 files changed, 29 insertions(+), 29 deletions(-)
accel/hvf/hvf-accel-ops.c +29 -0
@@ -50,6 +50,7 @@#include "qemu/osdep.h" #include "qemu/error-report.h" #include "qemu/main-loop.h" +#include "qemu/queue.h" #include "system/address-spaces.h" #include "gdbstub/enums.h" #include "hw/boards.h"
@@ -492,6 +493,34 @@ static void hvf_start_vcpu_thread(CPUState *cpu) cpu, QEMU_THREAD_JOINABLE); } +struct hvf_sw_breakpoint *hvf_find_sw_breakpoint (CPUState *cpu,vaddr pc) +{ +struct hvf_sw_breakpoint *bp; + + QTAILQ_FOREACH(bp, &hvf_state->hvf_sw_breakpoints, entry) { +if (bp->pc == pc) { +return bp; + } + } +return NULL ; +} + +int hvf_sw_breakpoints_active (CPUState *cpu) +{ +return !QTAILQ_EMPTY (&hvf_state->hvf_sw_breakpoints); +} + +static void do_hvf_update_guest_debug (CPUState *cpu,run_on_cpu_data arg) +{ +hvf_arch_update_guest_debug (cpu); +} + +int hvf_update_guest_debug (CPUState *cpu) +{ +run_on_cpu (cpu, do_hvf_update_guest_debug,RUN_ON_CPU_NULL ); +return 0 ; +} +static int hvf_insert_breakpoint (CPUState *cpu,int type,vaddr addr,vaddr len) {struct hvf_sw_breakpoint *bp;
accel/hvf/hvf-all.c +0 -29
@@ -12,7 +12,6 @@#include "qemu/error-report.h" #include "system/hvf.h" #include "system/hvf_int.h" -#include "hw/core/cpu.h" const char *hvf_return_string (hv_return_t ret) {
@@ -41,31 +40,3 @@ void assert_hvf_ok_impl(hv_return_t ret, const char *file, unsigned int line,abort (); } - -struct hvf_sw_breakpoint *hvf_find_sw_breakpoint (CPUState *cpu,vaddr pc) -{ -struct hvf_sw_breakpoint *bp; - - QTAILQ_FOREACH(bp, &hvf_state->hvf_sw_breakpoints, entry) { -if (bp->pc == pc) { -return bp; - } - } -return NULL ; -} - -int hvf_sw_breakpoints_active (CPUState *cpu) -{ -return !QTAILQ_EMPTY (&hvf_state->hvf_sw_breakpoints); -} - -static void do_hvf_update_guest_debug (CPUState *cpu,run_on_cpu_data arg) -{ -hvf_arch_update_guest_debug (cpu); -} - -int hvf_update_guest_debug (CPUState *cpu) -{ -run_on_cpu (cpu, do_hvf_update_guest_debug,RUN_ON_CPU_NULL ); -return 0 ; -}
Signature · 1 line
2.49.0
PATCH v4 31/65 accel/hvf: Move generic method declarations to hvf-all.c
In reply to Philippe Mathieu-Daudéhvf-all.c aims to contain the generic accel methods (TYPE_ACCEL), while hvf-accel-ops.c the per-vcpu methods (TYPE_ACCEL_OPS).
--- accel/hvf/hvf-accel-ops.c | 278 +------------------------------------- accel/hvf/hvf-all.c | 272 +++++++++++++++++++++++++++++++++++++ 2 files changed, 277 insertions(+), 273 deletions(-)
accel/hvf/hvf-accel-ops.c +5 -273
@@ -48,19 +48,16 @@*/ #include "qemu/osdep.h" -#include "qemu/error-report.h" +#include "qemu/guest-random.h" #include "qemu/main-loop.h" #include "qemu/queue.h" -#include "system/address-spaces.h" #include "gdbstub/enums.h" -#include "hw/boards.h" +#include "exec/cpu-common.h" #include "system/accel-ops.h" #include "system/cpus.h" #include "system/hvf.h" #include "system/hvf_int.h" -#include "system/runstate.h" -#include "qemu/guest-random.h" -#include "trace.h" +#include "hw/core/cpu.h" HVFState *hvf_state;
@@ -80,132 +77,6 @@ hvf_slot *hvf_find_overlap_slot(uint64_t start, uint64_t size)return NULL ; } -struct mac_slot { -int present; -uint64_t size; -uint64_t gpa_start; -uint64_t gva; -}; - -struct mac_slot mac_slots[32 ]; - -static int do_hvf_set_memory (hvf_slot *slot,hv_memory_flags_t flags) -{ -struct mac_slot *macslot; -hv_return_t ret; - - macslot = &mac_slots[slot->slot_id]; - -if (macslot->present) { -if (macslot->size != slot->size) { - macslot->present =0 ; -trace_hvf_vm_unmap (macslot->gpa_start, macslot->size); - ret =hv_vm_unmap (macslot->gpa_start, macslot->size); -assert_hvf_ok (ret); - } - } - -if (!slot->size) { -return 0 ; - } - - macslot->present =1 ; - macslot->gpa_start = slot->start; - macslot->size = slot->size; -trace_hvf_vm_map (slot->start, slot->size, slot->mem, flags, - flags &HV_MEMORY_READ ?'R' :'-' , - flags &HV_MEMORY_WRITE ?'W' :'-' , - flags &HV_MEMORY_EXEC ?'E' :'-' ); - ret =hv_vm_map (slot->mem, slot->start, slot->size, flags); -assert_hvf_ok (ret); -return 0 ; -} - -static void hvf_set_phys_mem (MemoryRegionSection *section,bool add) -{ -hvf_slot *mem; -MemoryRegion *area = section->mr; -bool writable = !area->readonly && !area->rom_device; -hv_memory_flags_t flags; -uint64_t page_size =qemu_real_host_page_size (); - -if (!memory_region_is_ram (area)) { -if (writable) { -return ; - }else if (!memory_region_is_romd (area)) { -/* -* If the memory device is not in romd_mode, then we actually want -* to remove the hvf memory slot so all accesses will trap. -*/ - add = false; - } - } - -if (!QEMU_IS_ALIGNED (int128_get64 (section->size), page_size) || - !QEMU_IS_ALIGNED (section->offset_within_address_space, page_size)) { -/* Not page aligned, so we can not map as RAM */ - add = false; - } - - mem =hvf_find_overlap_slot ( - section->offset_within_address_space, -int128_get64 (section->size)); - -if (mem && add) { -if (mem->size ==int128_get64 (section->size) && - mem->start == section->offset_within_address_space && - mem->mem == (memory_region_get_ram_ptr (area) + - section->offset_within_region)) { -return ;/* Same region was attempted to register, go away. */ - } - } - -/* Region needs to be reset. set the size to 0 and remap it. */ -if (mem) { - mem->size =0 ; -if (do_hvf_set_memory (mem,0 )) { -error_report ("Failed to reset overlapping slot" ); -abort (); - } - } - -if (!add) { -return ; - } - -if (area->readonly || - (!memory_region_is_ram (area) &&memory_region_is_romd (area))) { - flags =HV_MEMORY_READ |HV_MEMORY_EXEC ; - }else { - flags =HV_MEMORY_READ |HV_MEMORY_WRITE |HV_MEMORY_EXEC ; - } - -/* Now make a new slot. */ -int x; - -for (x =0 ; x < hvf_state->num_slots; ++x) { - mem = &hvf_state->slots[x]; -if (!mem->size) { -break ; - } - } - -if (x == hvf_state->num_slots) { -error_report ("No free slots" ); -abort (); - } - - mem->size =int128_get64 (section->size); - mem->mem =memory_region_get_ram_ptr (area) + section->offset_within_region; - mem->start = section->offset_within_address_space; - mem->region = area; - -if (do_hvf_set_memory (mem, flags)) { -error_report ("Error registering new memory slot" ); -abort (); - } -} -static void do_hvf_cpu_synchronize_state (CPUState *cpu,run_on_cpu_data arg) {if (!cpu->accel->dirty) {
@@ -243,157 +114,16 @@ static void hvf_cpu_synchronize_pre_loadvm(CPUState *cpu)run_on_cpu (cpu, do_hvf_cpu_synchronize_set_dirty,RUN_ON_CPU_NULL ); } -static void hvf_set_dirty_tracking (MemoryRegionSection *section,bool on) -{ -hvf_slot *slot; - - slot =hvf_find_overlap_slot ( - section->offset_within_address_space, -int128_get64 (section->size)); - -/* protect region against writes; begin tracking it */ -if (on) { - slot->flags |=HVF_SLOT_LOG ; -hv_vm_protect ((uintptr_t )slot->start, (size_t )slot->size, -HV_MEMORY_READ |HV_MEMORY_EXEC ); -/* stop tracking region*/ - }else { - slot->flags &= ~HVF_SLOT_LOG ; -hv_vm_protect ((uintptr_t )slot->start, (size_t )slot->size, -HV_MEMORY_READ |HV_MEMORY_WRITE |HV_MEMORY_EXEC ); - } -} - -static void hvf_log_start (MemoryListener *listener, -MemoryRegionSection *section,int old,int new) -{ -if (old !=0 ) { -return ; - } - -hvf_set_dirty_tracking (section,1 ); -} - -static void hvf_log_stop (MemoryListener *listener, -MemoryRegionSection *section,int old,int new) -{ -if (new !=0 ) { -return ; - } - -hvf_set_dirty_tracking (section,0 ); -} - -static void hvf_log_sync (MemoryListener *listener, -MemoryRegionSection *section) -{ -/* -* sync of dirty pages is handled elsewhere; just make sure we keep -* tracking the region. -*/ -hvf_set_dirty_tracking (section,1 ); -} - -static void hvf_region_add (MemoryListener *listener, -MemoryRegionSection *section) -{ -hvf_set_phys_mem (section, true); -} - -static void hvf_region_del (MemoryListener *listener, -MemoryRegionSection *section) -{ -hvf_set_phys_mem (section, false); -} - -static MemoryListener hvf_memory_listener = { - .name ="hvf" , - .priority =MEMORY_LISTENER_PRIORITY_ACCEL , - .region_add = hvf_region_add, - .region_del = hvf_region_del, - .log_start = hvf_log_start, - .log_stop = hvf_log_stop, - .log_sync = hvf_log_sync, -}; -static void dummy_signal (int sig) { } -bool hvf_allowed; - -static int hvf_accel_init (AccelState *as,MachineState *ms) -{ -int x; -hv_return_t ret; -HVFState *s =HVF_STATE (as); -int pa_range =36 ; -MachineClass *mc =MACHINE_GET_CLASS (ms); - -if (mc->hvf_get_physical_address_range) { - pa_range = mc->hvf_get_physical_address_range (ms); -if (pa_range <0 ) { -return -EINVAL ; - } - } - - ret =hvf_arch_vm_create (ms, (uint32_t )pa_range); -if (ret ==HV_DENIED ) { -error_report ("Could not access HVF. Is the executable signed" -" with com.apple.security.hypervisor entitlement?" ); -exit (1 ); - } -assert_hvf_ok (ret); - - s->num_slots =ARRAY_SIZE (s->slots); -for (x =0 ; x < s->num_slots; ++x) { - s->slots[x].size =0 ; - s->slots[x].slot_id = x; - } - -QTAILQ_INIT (&s->hvf_sw_breakpoints); - - hvf_state = s; -memory_listener_register (&hvf_memory_listener, &address_space_memory); - -return hvf_arch_init (); -} - -static inline int hvf_gdbstub_sstep_flags (AccelState *as) -{ -return SSTEP_ENABLE |SSTEP_NOIRQ ; -} -static void do_hvf_get_vcpu_exec_time (CPUState *cpu,run_on_cpu_data arg) {int r =hv_vcpu_get_exec_time (cpu->accel->fd, arg.host_ptr);assert_hvf_ok (r); } -static void hvf_accel_class_init (ObjectClass *oc,const void *data) -{ -AccelClass *ac =ACCEL_CLASS (oc); - ac->name ="HVF" ; - ac->init_machine = hvf_accel_init; - ac->allowed = &hvf_allowed; - ac->supports_guest_debug = hvf_arch_supports_guest_debug; - ac->gdbstub_supported_sstep_flags = hvf_gdbstub_sstep_flags; -} - -static const TypeInfo hvf_accel_type = { - .name =TYPE_HVF_ACCEL , - .parent =TYPE_ACCEL , - .instance_size =sizeof (HVFState), - .class_init = hvf_accel_class_init, -}; - -static void hvf_type_init (void ) -{ -type_register_static (&hvf_accel_type); -} - -type_init (hvf_type_init); -static void hvf_vcpu_destroy (CPUState *cpu) {hv_return_t ret =hv_vcpu_destroy (cpu->accel->fd);
@@ -662,8 +392,10 @@ static const TypeInfo hvf_accel_ops_type = { .class_init = hvf_accel_ops_class_init, .abstract = true, }; +static void hvf_accel_ops_register_types (void ) {type_register_static (&hvf_accel_ops_type); } +type_init (hvf_accel_ops_register_types);
accel/hvf/hvf-all.c +272 -0
283 lines not on this page · raw message
Signature · 1 line
2.49.0
PATCH v4 32/65 cpus: Document CPUState::vcpu_dirty field
In reply to Philippe Mathieu-Daudé--- include/hw/core/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
include/hw/core/cpu.h +2 -1
@@ -441,6 +441,7 @@ struct qemu_work_item;* @opaque: User data. * @mem_io_pc: Host Program Counter at which the memory was accessed. * @accel: Pointer to accelerator specific state. +* @vcpu_dirty: Hardware accelerator is not synchronized with QEMU state * @kvm_fd: vCPU file descriptor for KVM. * @work_mutex: Lock to prevent multiple access to @work_list. * @work_list: List of pending asynchronous work.
@@ -537,7 +538,6 @@ struct CPUState {uint32_t kvm_fetch_index;uint64_t dirty_pages;int kvm_vcpu_stats_fd; -bool vcpu_dirty;/* Use by accel-block: CPU is executing an ioctl() */ QemuLockCnt in_ioctl_lock;
@@ -553,6 +553,7 @@ struct CPUState {uint32_t halted;int32_t exception_index; +bool vcpu_dirty;AccelCPUState *accel;/* Used to keep track of an outstanding cpu throttle thread for migration
Signature · 1 line
2.49.0
Re: [PATCH v4 32/65] cpus: Document CPUState::vcpu_dirty field
Quoted 10 lines · Philippe Mathieu-Daudé
Date: Wed, 2 Jul 2025 20:52:54 +0200
From: Philippe Mathieu-Daudé <[email protected]>
Subject: [PATCH v4 32/65] cpus: DocumentCPUState::vcpu_dirtyfield
X-Mailer: git-send-email 2.49.0Signed-off-by Philippe Mathieu-Daudé <[email protected]>Reviewed-by Richard Henderson <[email protected]>--- include/hw/core/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
PATCH v4 33/65 accel/hvf: Replace @dirty field by generic CPUState::vcpu_dirty field
In reply to Philippe Mathieu-DaudéNo need for accel-specific @dirty field when we have a generic one in CPUState.
--- include/system/hvf_int.h | 1 - accel/hvf/hvf-accel-ops.c | 10 +++++----- target/arm/hvf/hvf.c | 4 ++-- target/i386/hvf/hvf.c | 4 ++-- target/i386/hvf/x86hvf.c | 2 +- 5 files changed, 10 insertions(+), 11 deletions(-)
include/system/hvf_int.h +0 -1
@@ -62,7 +62,6 @@ struct AccelCPUState {bool vtimer_masked;sigset_t unblock_ipi_mask;bool guest_debug_enabled; -bool dirty; }; void assert_hvf_ok_impl(hv_return_t ret, const char *file, unsigned int line,
accel/hvf/hvf-accel-ops.c +5 -5
@@ -79,15 +79,15 @@ hvf_slot *hvf_find_overlap_slot(uint64_t start, uint64_t size)static void do_hvf_cpu_synchronize_state (CPUState *cpu,run_on_cpu_data arg) { -if (!cpu->accel->dirty) { +if (!cpu->vcpu_dirty) {hvf_get_registers (cpu); - cpu->accel->dirty = true; + cpu->vcpu_dirty = true; } }static void hvf_cpu_synchronize_state (CPUState *cpu) { -if (!cpu->accel->dirty) { +if (!cpu->vcpu_dirty) {run_on_cpu (cpu, do_hvf_cpu_synchronize_state,RUN_ON_CPU_NULL ); } }
@@ -96,7 +96,7 @@ static void do_hvf_cpu_synchronize_set_dirty(CPUState *cpu, run_on_cpu_data arg) {/* QEMU state is the reference, push it to HVF now and on next entry */ - cpu->accel->dirty = true; + cpu->vcpu_dirty = true; }static void hvf_cpu_synchronize_post_reset (CPUState *cpu)
@@ -156,8 +156,8 @@ static int hvf_init_vcpu(CPUState *cpu)#else r =hv_vcpu_create (&cpu->accel->fd,HV_VCPU_DEFAULT );#endif - cpu->accel->dirty = true;assert_hvf_ok (r); + cpu->vcpu_dirty = true; cpu->accel->guest_debug_enabled = false;
target/arm/hvf/hvf.c +2 -2
@@ -813,9 +813,9 @@ int hvf_put_registers(CPUState *cpu)static void flush_cpu_state (CPUState *cpu) { -if (cpu->accel->dirty) { +if (cpu->vcpu_dirty) {hvf_put_registers (cpu); - cpu->accel->dirty = false; + cpu->vcpu_dirty = false; } }
target/i386/hvf/hvf.c +2 -2
@@ -738,9 +738,9 @@ int hvf_vcpu_exec(CPUState *cpu) } do { - if (cpu->accel->dirty) { + if (cpu->vcpu_dirty) { hvf_put_registers(cpu); - cpu->accel->dirty = false; + cpu->vcpu_dirty = false; } if (hvf_inject_interrupts(cpu)) {
target/i386/hvf/x86hvf.c +1 -1
@@ -427,7 +427,7 @@ int hvf_process_events(CPUState *cs)X86CPU *cpu =X86_CPU (cs);CPUX86State *env = &cpu->env; -if (!cs->accel->dirty) { +if (!cs->vcpu_dirty) {/* light weight sync for CPU_INTERRUPT_HARD and IF_MASK */ env->eflags =rreg (cs->accel->fd,HV_X86_RFLAGS ); }
Signature · 1 line
2.49.0
Re: [PATCH v4 33/65] accel/hvf: Replace @dirty field by generic CPUState::vcpu_dirty field
Quoted 8 lines · Philippe Mathieu-Daudé
No need for accel-specific @dirty field when we have a generic one in CPUState.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>Reviewed-by Richard Henderson <[email protected]>
Quoted 8 lines
---
include/system/hvf_int.h | 1 - accel/hvf/hvf-accel-ops.c | 10 +++++----- target/arm/hvf/hvf.c | 4 ++-- target/i386/hvf/hvf.c | 4 ++-- target/i386/hvf/x86hvf.c | 2 +- 5 files changed, 10 insertions(+), 11 deletions(-)
PATCH v4 34/65 accel/nvmm: Replace @dirty field by generic CPUState::vcpu_dirty field
In reply to Philippe Mathieu-DaudéNo need for accel-specific @dirty field when we have a generic one in CPUState.
--- target/i386/nvmm/nvmm-all.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-)
target/i386/nvmm/nvmm-all.c +10 -11
@@ -30,7 +30,6 @@ struct AccelCPUState {struct nvmm_vcpu vcpu;uint8_t tpr;bool stop; -bool dirty;/* Window-exiting for INTs/NMIs. */ bool int_window_exit;
@@ -508,7 +507,7 @@ nvmm_io_callback(struct nvmm_io *io) }/* Needed, otherwise infinite loop. */ - current_cpu->accel->dirty = false; + current_cpu->vcpu_dirty = false; } static void
@@ -517,7 +516,7 @@ nvmm_mem_callback(struct nvmm_mem *mem)cpu_physical_memory_rw (mem->gpa, mem->data, mem->size, mem->write);/* Needed, otherwise infinite loop. */ - current_cpu->accel->dirty = false; + current_cpu->vcpu_dirty = false; }static struct nvmm_assist_callbacks nvmm_callbacks = {
@@ -727,9 +726,9 @@ nvmm_vcpu_loop(CPUState *cpu)* Inner VCPU loop. */ do { - if (cpu->accel->dirty) { + if (cpu->vcpu_dirty) { nvmm_set_registers(cpu); - cpu->accel->dirty = false; + cpu->vcpu_dirty = false; } if (qcpu->stop) {
@@ -827,32 +826,32 @@ static void do_nvmm_cpu_synchronize_state(CPUState *cpu, run_on_cpu_data arg) {nvmm_get_registers (cpu); - cpu->accel->dirty = true; + cpu->vcpu_dirty = true; }static void do_nvmm_cpu_synchronize_post_reset (CPUState *cpu,run_on_cpu_data arg) {nvmm_set_registers (cpu); - cpu->accel->dirty = false; + cpu->vcpu_dirty = false; }static void do_nvmm_cpu_synchronize_post_init (CPUState *cpu,run_on_cpu_data arg) {nvmm_set_registers (cpu); - cpu->accel->dirty = false; + cpu->vcpu_dirty = false; }static void do_nvmm_cpu_synchronize_pre_loadvm (CPUState *cpu,run_on_cpu_data arg) { - cpu->accel->dirty = true; + cpu->vcpu_dirty = true; }void nvmm_cpu_synchronize_state (CPUState *cpu) { -if (!cpu->accel->dirty) { +if (!cpu->vcpu_dirty) {run_on_cpu (cpu, do_nvmm_cpu_synchronize_state,RUN_ON_CPU_NULL ); } }
@@ -982,7 +981,7 @@ nvmm_init_vcpu(CPUState *cpu) } } - qcpu->dirty = true; + qcpu->vcpu_dirty = true; cpu->accel = qcpu;return 0 ;
Signature · 1 line
2.49.0
PATCH v4 35/65 accel/whpx: Replace @dirty field by generic CPUState::vcpu_dirty field
In reply to Philippe Mathieu-DaudéNo need for accel-specific @dirty field when we have a generic one in CPUState.
--- target/i386/whpx/whpx-all.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-)
target/i386/whpx/whpx-all.c +11 -12
@@ -237,7 +237,6 @@ struct AccelCPUState {uint64_t tpr;uint64_t apic_base;bool interruption_pending; -bool dirty;/* Must be the last field as it may have a tail */ WHV_RUN_VP_EXIT_CONTEXT exit_ctx;
@@ -836,7 +835,7 @@ static HRESULT CALLBACK whpx_emu_setreg_callback(* The emulator just successfully wrote the register state. We clear the * dirty state so we avoid the double write on resume of the VP. */ - cpu->accel->dirty = false; + cpu->vcpu_dirty = false;return hr; }
@@ -1391,7 +1390,7 @@ static int whpx_last_vcpu_stopping(CPUState *cpu)/* Returns the address of the next instruction that is about to be executed. */ static vaddr whpx_vcpu_get_pc (CPUState *cpu,bool exit_context_valid) { -if (cpu->accel->dirty) { +if (cpu->vcpu_dirty) {/* The CPU registers have been modified by other parts of QEMU. */ return cpu_env (cpu)->eip; }else if (exit_context_valid) {
@@ -1704,9 +1703,9 @@ static int whpx_vcpu_run(CPUState *cpu) } do { - if (cpu->accel->dirty) { + if (cpu->vcpu_dirty) { whpx_set_registers(cpu, WHPX_SET_RUNTIME_STATE); - cpu->accel->dirty = false; + cpu->vcpu_dirty = false; } if (exclusive_step_mode == WHPX_STEP_NONE) {
@@ -2054,9 +2053,9 @@ static int whpx_vcpu_run(CPUState *cpu)static void do_whpx_cpu_synchronize_state (CPUState *cpu,run_on_cpu_data arg) { -if (!cpu->accel->dirty) { +if (!cpu->vcpu_dirty) {whpx_get_registers (cpu); - cpu->accel->dirty = true; + cpu->vcpu_dirty = true; } }
@@ -2064,20 +2063,20 @@ static void do_whpx_cpu_synchronize_post_reset(CPUState *cpu, run_on_cpu_data arg) {whpx_set_registers (cpu,WHPX_SET_RESET_STATE ); - cpu->accel->dirty = false; + cpu->vcpu_dirty = false; }static void do_whpx_cpu_synchronize_post_init (CPUState *cpu,run_on_cpu_data arg) {whpx_set_registers (cpu,WHPX_SET_FULL_STATE ); - cpu->accel->dirty = false; + cpu->vcpu_dirty = false; }static void do_whpx_cpu_synchronize_pre_loadvm (CPUState *cpu,run_on_cpu_data arg) { - cpu->accel->dirty = true; + cpu->vcpu_dirty = true; }/*
@@ -2086,7 +2085,7 @@ static void do_whpx_cpu_synchronize_pre_loadvm(CPUState *cpu,void whpx_cpu_synchronize_state (CPUState *cpu) { -if (!cpu->accel->dirty) { +if (!cpu->vcpu_dirty) {run_on_cpu (cpu, do_whpx_cpu_synchronize_state,RUN_ON_CPU_NULL ); } }
@@ -2226,7 +2225,7 @@ int whpx_init_vcpu(CPUState *cpu) } vcpu->interruptable = true; - vcpu->dirty = true; + cpu->vcpu_dirty = true; cpu->accel = vcpu; max_vcpu_index =max (max_vcpu_index, cpu->cpu_index);qemu_add_vm_change_state_handler (whpx_cpu_update_state, env);
Signature · 1 line
2.49.0
PATCH v4 36/65 accel/kvm: Remove kvm_cpu_synchronize_state() stub
In reply to Philippe Mathieu-DaudéSince commit 57038a92bb0 ("cpus: extract out kvm-specific code to accel/kvm") the kvm_cpu_synchronize_state() stub is not necessary.
--- accel/stubs/kvm-stub.c | 4 ---- 1 file changed, 4 deletions(-)
accel/stubs/kvm-stub.c +0 -4
@@ -29,10 +29,6 @@ void kvm_flush_coalesced_mmio_buffer(void) { } -void kvm_cpu_synchronize_state (CPUState *cpu) -{ -} -bool kvm_has_sync_mmu (void ) {return false;
Signature · 1 line
2.49.0
PATCH v4 37/65 accel/system: Document cpu_synchronize_state()
In reply to Philippe Mathieu-Daudé--- include/system/accel-ops.h | 8 ++++++++ include/system/hw_accel.h | 13 +++++++++++-- 2 files changed, 19 insertions(+), 2 deletions(-)
include/system/accel-ops.h +8 -0
@@ -45,6 +45,14 @@ struct AccelOpsClass {void (*synchronize_post_reset)(CPUState *cpu);void (*synchronize_post_init)(CPUState *cpu); +/** +* synchronize_state: +* synchronize_pre_loadvm: +* @cpu: The vCPU to synchronize. +* +* Request to synchronize QEMU vCPU registers from the hardware accelerator +* (the hardware accelerator is the reference). +*/ void (*synchronize_state)(CPUState *cpu);void (*synchronize_pre_loadvm)(CPUState *cpu);
include/system/hw_accel.h +11 -2
@@ -17,9 +17,18 @@#include "system/whpx.h" #include "system/nvmm.h" +/** +* cpu_synchronize_state: +* cpu_synchronize_pre_loadvm: +* @cpu: The vCPU to synchronize. +* +* Request to synchronize QEMU vCPU registers from the hardware accelerator +* (the hardware accelerator is the reference). +*/ void cpu_synchronize_state (CPUState *cpu); -void cpu_synchronize_post_reset (CPUState *cpu); -void cpu_synchronize_post_init (CPUState *cpu);void cpu_synchronize_pre_loadvm (CPUState *cpu); +void cpu_synchronize_post_reset (CPUState *cpu); +void cpu_synchronize_post_init (CPUState *cpu); +#endif /* QEMU_HW_ACCEL_H */
Signature · 1 line
2.49.0
PATCH v4 38/65 accel/system: Document cpu_synchronize_state_post_init/reset()
In reply to Philippe Mathieu-Daudé--- include/system/accel-ops.h | 8 ++++++++ include/system/hw_accel.h | 8 ++++++++ 2 files changed, 16 insertions(+)
include/system/accel-ops.h +8 -0
@@ -43,6 +43,14 @@ struct AccelOpsClass {void (*kick_vcpu_thread)(CPUState *cpu);bool (*cpu_thread_is_idle)(CPUState *cpu); +/** +* synchronize_post_reset: +* synchronize_post_init: +* @cpu: The vCPU to synchronize. +* +* Request to synchronize QEMU vCPU registers to the hardware accelerator +* (QEMU is the reference). +*/ void (*synchronize_post_reset)(CPUState *cpu);void (*synchronize_post_init)(CPUState *cpu);/**
include/system/hw_accel.h +8 -0
@@ -28,6 +28,14 @@void cpu_synchronize_state (CPUState *cpu);void cpu_synchronize_pre_loadvm (CPUState *cpu); +/** +* cpu_synchronize_post_reset: +* cpu_synchronize_post_init: +* @cpu: The vCPU to synchronize. +* +* Request to synchronize QEMU vCPU registers to the hardware accelerator +* (QEMU is the reference). +*/ void cpu_synchronize_post_reset (CPUState *cpu);void cpu_synchronize_post_init (CPUState *cpu);
Signature · 1 line
2.49.0
PATCH v4 39/65 accel/nvmm: Expose nvmm_enabled() to common code
In reply to Philippe Mathieu-DaudéCurrently nvmm_enabled() is restricted to target-specific code. By defining CONFIG_NVMM_IS_POSSIBLE we allow its use anywhere.
--- include/system/nvmm.h | 23 ++++++++++++----------- accel/stubs/nvmm-stub.c | 12 ++++++++++++ target/i386/nvmm/nvmm-all.c | 6 ------ accel/stubs/meson.build | 1 + 4 files changed, 25 insertions(+), 17 deletions(-) create mode 100644 accel/stubs/nvmm-stub.c
include/system/nvmm.h +12 -11
@@ -13,17 +13,18 @@#define QEMU_NVMM_H #ifdef COMPILING_PER_TARGET - -#ifdef CONFIG_NVMM - -int nvmm_enabled (void ); - -#else /* CONFIG_NVMM */ - -#define nvmm_enabled () (0) - -#endif /* CONFIG_NVMM */ - +# ifdef CONFIG_NVMM +# define CONFIG_NVMM_IS_POSSIBLE +# endif /* !CONFIG_NVMM */ +#else +# define CONFIG_NVMM_IS_POSSIBLE #endif /* COMPILING_PER_TARGET */ +#ifdef CONFIG_NVMM_IS_POSSIBLE +extern bool nvmm_allowed; +#define nvmm_enabled () (nvmm_allowed) +#else /* !CONFIG_NVMM_IS_POSSIBLE */ +#define nvmm_enabled () 0 +#endif /* !CONFIG_NVMM_IS_POSSIBLE */ +#endif /* QEMU_NVMM_H */
accel/stubs/nvmm-stub.c new file +12 -0
@@ -0,0 +1,12 @@ +/* +* NVMM stubs for QEMU +* +* Copyright (c) Linaro +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#include "qemu/osdep.h" +#include "system/hvf.h" + +bool nvmm_allowed;
target/i386/nvmm/nvmm-all.c +0 -6
@@ -1192,12 +1192,6 @@ nvmm_accel_init(AccelState *as, MachineState *ms)return 0 ; } -int -nvmm_enabled (void ) -{ -return nvmm_allowed; -} -static void nvmm_accel_class_init (ObjectClass *oc,const void *data) {
accel/stubs/meson.build +1 -0
@@ -3,5 +3,6 @@ system_stubs_ss.add(when: 'CONFIG_XEN', if_false: files('xen-stub.c')) system_stubs_ss.add(when: 'CONFIG_KVM', if_false: files('kvm-stub.c')) system_stubs_ss.add(when: 'CONFIG_TCG', if_false: files('tcg-stub.c')) system_stubs_ss.add(when: 'CONFIG_HVF', if_false: files('hvf-stub.c')) +system_stubs_ss.add(when: 'CONFIG_NVMM', if_false: files('nvmm-stub.c')) specific_ss.add_all(when: ['CONFIG_SYSTEM_ONLY'], if_true: system_stubs_ss)
Signature · 1 line
2.49.0
PATCH v4 40/65 accel/whpx: Expose whpx_enabled() to common code
In reply to Philippe Mathieu-DaudéCurrently whpx_enabled() is restricted to target-specific code. By defining CONFIG_WHPX_IS_POSSIBLE we allow its use anywhere.
--- include/system/whpx.h | 27 ++++++++++++++------------- accel/stubs/whpx-stub.c | 12 ++++++++++++ target/i386/whpx/whpx-all.c | 5 ----- accel/stubs/meson.build | 1 + 4 files changed, 27 insertions(+), 18 deletions(-) create mode 100644 accel/stubs/whpx-stub.c
include/system/whpx.h +14 -13
@@ -16,19 +16,20 @@#define QEMU_WHPX_H #ifdef COMPILING_PER_TARGET - -#ifdef CONFIG_WHPX - -int whpx_enabled (void ); -bool whpx_apic_in_platform (void ); - -#else /* CONFIG_WHPX */ - -#define whpx_enabled () (0) -#define whpx_apic_in_platform () (0) - -#endif /* CONFIG_WHPX */ - +# ifdef CONFIG_WHPX +# define CONFIG_WHPX_IS_POSSIBLE +# endif /* !CONFIG_WHPX */ +#else +# define CONFIG_WHPX_IS_POSSIBLE #endif /* COMPILING_PER_TARGET */ +#ifdef CONFIG_WHPX_IS_POSSIBLE +extern bool whpx_allowed; +#define whpx_enabled () (whpx_allowed) +bool whpx_apic_in_platform (void ); +#else /* !CONFIG_WHPX_IS_POSSIBLE */ +#define whpx_enabled () 0 +#define whpx_apic_in_platform () (0) +#endif /* !CONFIG_WHPX_IS_POSSIBLE */ +#endif /* QEMU_WHPX_H */
accel/stubs/whpx-stub.c new file +12 -0
@@ -0,0 +1,12 @@ +/* +* WHPX stubs for QEMU +* +* Copyright (c) Linaro +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#include "qemu/osdep.h" +#include "system/whpx.h" + +bool whpx_allowed;
target/i386/whpx/whpx-all.c +0 -5
@@ -2688,11 +2688,6 @@ error:return ret; } -int whpx_enabled (void ) -{ -return whpx_allowed; -} -bool whpx_apic_in_platform (void ) {return whpx_global.apic_in_platform; }
accel/stubs/meson.build +1 -0
@@ -4,5 +4,6 @@ system_stubs_ss.add(when: 'CONFIG_KVM', if_false: files('kvm-stub.c')) system_stubs_ss.add(when: 'CONFIG_TCG', if_false: files('tcg-stub.c')) system_stubs_ss.add(when: 'CONFIG_HVF', if_false: files('hvf-stub.c')) system_stubs_ss.add(when: 'CONFIG_NVMM', if_false: files('nvmm-stub.c')) +system_stubs_ss.add(when: 'CONFIG_WHPX', if_false: files('whpx-stub.c')) specific_ss.add_all(when: ['CONFIG_SYSTEM_ONLY'], if_true: system_stubs_ss)
Signature · 1 line
2.49.0
PATCH v4 41/65 accel/system: Introduce hwaccel_enabled() helper
In reply to Philippe Mathieu-Daudéhwaccel_enabled() return whether any hardware accelerator is available.
--- include/system/hw_accel.h | 13 +++++++++++++ 1 file changed, 13 insertions(+)
include/system/hw_accel.h +13 -0
@@ -39,4 +39,17 @@ void cpu_synchronize_pre_loadvm(CPUState *cpu);void cpu_synchronize_post_reset (CPUState *cpu);void cpu_synchronize_post_init (CPUState *cpu); +/** +* hwaccel_enabled: +* +* Returns: %true if a hardware accelerator is enabled, %false otherwise. +*/ +static inline bool hwaccel_enabled (void ) +{ +return hvf_enabled () + ||kvm_enabled () + ||nvmm_enabled () + ||whpx_enabled (); +} +#endif /* QEMU_HW_ACCEL_H */
Signature · 1 line
2.49.0
PATCH v4 42/65 target/arm: Use generic hwaccel_enabled() to check 'host' cpu type
In reply to Philippe Mathieu-DaudéWe should be able to use the 'host' CPU with any hardware accelerator.
--- target/arm/arm-qmp-cmds.c | 5 +++-- target/arm/cpu.c | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-)
target/arm/arm-qmp-cmds.c +3 -2
@@ -30,6 +30,7 @@#include "qapi/qapi-commands-misc-arm.h" #include "qobject/qdict.h" #include "qom/qom-qobject.h" +#include "system/hw_accel.h" #include "cpu.h" static GICCapability *gic_cap_new (int version)
@@ -116,8 +117,8 @@ CpuModelExpansionInfo *qmp_query_cpu_model_expansion(CpuModelExpansionType type,return NULL ; } -if (!kvm_enabled () && !strcmp (model->name,"host" )) { -error_setg (errp,"The CPU type '%s' requires KVM" , model->name); +if (!hwaccel_enabled () && !strcmp (model->name,"host" )) { +error_setg (errp,"The CPU type 'host' requires hardware accelerator" );return NULL ; }
target/arm/cpu.c +3 -2
@@ -1978,8 +1978,9 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)* this is the first point where we can report it. */ if (cpu->host_cpu_probe_failed) { -if (!kvm_enabled () && !hvf_enabled ()) { -error_setg (errp,"The 'host' CPU type can only be used with KVM or HVF" ); +if (!hwaccel_enabled ()) { +error_setg (errp,"The 'host' CPU type can only be used with " +"hardware accelator such KVM/HVF" ); }else {error_setg (errp,"Failed to retrieve host CPU features" ); }
Signature · 1 line
2.49.0
PATCH v4 43/65 accel/dummy: Extract 'dummy-cpus.h' header from 'system/cpus.h'
In reply to Philippe Mathieu-Daudé'dummy' helpers are specific to accelerator implementations, no need to expose them via "system/cpus.h".
--- accel/dummy-cpus.h | 14 ++++++++++++++ include/system/cpus.h | 5 ----- accel/dummy-cpus.c | 1 + accel/qtest/qtest.c | 1 + accel/xen/xen-all.c | 1 + 5 files changed, 17 insertions(+), 5 deletions(-) create mode 100644 accel/dummy-cpus.h
accel/dummy-cpus.h new file +14 -0
@@ -0,0 +1,14 @@ +/* +* Dummy cpu thread code +* +* Copyright IBM, Corp. 2011 +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#ifndef ACCEL_DUMMY_CPUS_H +#define ACCEL_DUMMY_CPUS_H + +void dummy_start_vcpu_thread (CPUState *cpu); + +#endif
include/system/cpus.h +0 -5
@@ -7,11 +7,6 @@ void cpus_register_accel(const AccelOpsClass *i);/* return registers ops */ const AccelOpsClass *cpus_get_accel (void ); -/* accel/dummy-cpus.c */ - -/* Create a dummy vcpu for AccelOpsClass->create_vcpu_thread */ -void dummy_start_vcpu_thread (CPUState *); -/* interface available for cpus accelerator threads */ /* For temporary buffers for forming a name */
accel/dummy-cpus.c +1 -0
@@ -17,6 +17,7 @@#include "qemu/guest-random.h" #include "qemu/main-loop.h" #include "hw/core/cpu.h" +#include "accel/dummy-cpus.h" static void *dummy_cpu_thread_fn (void *arg) {
accel/qtest/qtest.c +1 -0
@@ -24,6 +24,7 @@#include "qemu/guest-random.h" #include "qemu/main-loop.h" #include "hw/core/cpu.h" +#include "accel/dummy-cpus.h" static int64_t qtest_clock_counter;
accel/xen/xen-all.c +1 -0
@@ -18,6 +18,7 @@#include "hw/xen/xen_igd.h" #include "chardev/char.h" #include "qemu/accel.h" +#include "accel/dummy-cpus.h" #include "system/accel-ops.h" #include "system/cpus.h" #include "system/xen.h"
Signature · 1 line
2.49.0
PATCH v4 44/65 accel/dummy: Factor dummy_thread_precreate() out
In reply to Philippe Mathieu-DaudéInitialize the semaphore before creating the thread, factor out as dummy_thread_precreate().
--- accel/dummy-cpus.h | 1 + accel/dummy-cpus.c | 12 +++++++++--- 2 files changed, 10 insertions(+), 3 deletions(-)
accel/dummy-cpus.h +1 -0
@@ -9,6 +9,7 @@#ifndef ACCEL_DUMMY_CPUS_H #define ACCEL_DUMMY_CPUS_H +void dummy_thread_precreate (CPUState *cpu);void dummy_start_vcpu_thread (CPUState *cpu);#endif
accel/dummy-cpus.c +9 -3
@@ -65,15 +65,21 @@ static void *dummy_cpu_thread_fn(void *arg)return NULL ; } +void dummy_thread_precreate (CPUState *cpu) +{ +#ifdef _WIN32 +qemu_sem_init (&cpu->sem,0 ); +#endif +} +void dummy_start_vcpu_thread (CPUState *cpu) {char thread_name[VCPU_THREAD_NAME_SIZE ]; +dummy_thread_precreate (cpu); +snprintf (thread_name,VCPU_THREAD_NAME_SIZE ,"CPU %d/DUMMY" , cpu->cpu_index);qemu_thread_create (cpu->thread, thread_name, dummy_cpu_thread_fn, cpu,QEMU_THREAD_JOINABLE ); -#ifdef _WIN32 -qemu_sem_init (&cpu->sem,0 ); -#endif }
Signature · 1 line
2.49.0
PATCH v4 45/65 accel/tcg: Factor tcg_vcpu_thread_precreate() out
In reply to Philippe Mathieu-DaudéFactor tcg_vcpu_thread_precreate() out for re-use.
--- accel/tcg/tcg-accel-ops.h | 1 + accel/tcg/tcg-accel-ops-mttcg.c | 3 +-- accel/tcg/tcg-accel-ops-rr.c | 3 +-- accel/tcg/tcg-accel-ops.c | 7 +++++++ 4 files changed, 10 insertions(+), 4 deletions(-)
accel/tcg/tcg-accel-ops.h +1 -0
@@ -14,6 +14,7 @@#include "system/cpus.h" +void tcg_vcpu_thread_precreate (CPUState *cpu);void tcg_cpu_destroy (CPUState *cpu);int tcg_cpu_exec (CPUState *cpu);void tcg_handle_interrupt (CPUState *cpu,int mask);
accel/tcg/tcg-accel-ops-mttcg.c +1 -2
@@ -133,8 +133,7 @@ void mttcg_start_vcpu_thread(CPUState *cpu) {char thread_name[VCPU_THREAD_NAME_SIZE ]; -g_assert (tcg_enabled ()); -tcg_cpu_init_cflags (cpu, current_machine->smp.max_cpus >1 ); +tcg_vcpu_thread_precreate (cpu);/* create a thread per vCPU with TCG (MTTCG) */ snprintf(thread_name, VCPU_THREAD_NAME_SIZE, "CPU %d/TCG",
accel/tcg/tcg-accel-ops-rr.c +1 -2
@@ -311,8 +311,7 @@ void rr_start_vcpu_thread(CPUState *cpu)static QemuCond *single_tcg_halt_cond;static QemuThread *single_tcg_cpu_thread; -g_assert (tcg_enabled ()); -tcg_cpu_init_cflags (cpu, false); +tcg_vcpu_thread_precreate (cpu);if (!single_tcg_cpu_thread) { single_tcg_halt_cond = cpu->halt_cond;
accel/tcg/tcg-accel-ops.c +7 -0
@@ -41,6 +41,7 @@#include "gdbstub/enums.h" #include "hw/core/cpu.h" +#include "hw/boards.h" #include "tcg-accel-ops.h" #include "tcg-accel-ops-mttcg.h"
@@ -69,6 +70,12 @@ void tcg_cpu_init_cflags(CPUState *cpu, bool parallel)tcg_cflags_set (cpu, cflags); } +void tcg_vcpu_thread_precreate (CPUState *cpu) +{ +g_assert (tcg_enabled ()); +tcg_cpu_init_cflags (cpu, current_machine->smp.max_cpus >1 ); +} +void tcg_cpu_destroy (CPUState *cpu) {cpu_thread_signal_destroyed (cpu);
Signature · 1 line
2.49.0
PATCH v4 46/65 accel: Factor accel_create_vcpu_thread() out
In reply to Philippe Mathieu-DaudéFactor accel_create_vcpu_thread() out of system/cpus.c to be able to access accel/ internal definitions.
--- include/qemu/accel.h | 2 ++ accel/accel-common.c | 19 +++++++++++++++++++ system/cpus.c | 4 +--- 3 files changed, 22 insertions(+), 3 deletions(-)
include/qemu/accel.h +2 -0
@@ -97,6 +97,8 @@ void accel_pre_resume(MachineState *ms, bool step_pending);*/ void accel_cpu_instance_init (CPUState *cpu); +void accel_create_vcpu_thread (AccelState *accel,CPUState *cpu); +/** * accel_cpu_common_realize: * @cpu: The CPU that needs to call accel-specific cpu realization.
accel/accel-common.c +19 -0
@@ -89,6 +89,25 @@ void accel_cpu_instance_init(CPUState *cpu) } } +void accel_create_vcpu_thread (AccelState *accel,CPUState *cpu) +{ +AccelClass *ac; + +if (!accel) { + accel =current_accel (); + } + ac =ACCEL_GET_CLASS (accel); + +/* accelerators all implement the AccelOpsClass */ +g_assert (ac->ops); + +if (ac->ops->create_vcpu_thread !=NULL ) { + ac->ops->create_vcpu_thread (cpu); + }else { +g_assert_not_reached (); + } +} +bool accel_cpu_common_realize (CPUState *cpu,Error **errp) {AccelState *accel =current_accel ();
system/cpus.c +1 -3
@@ -698,9 +698,7 @@ void qemu_init_vcpu(CPUState *cpu)cpu_address_space_init (cpu,0 ,"cpu-memory" , cpu->memory); } -/* accelerators all implement the AccelOpsClass */ -g_assert (cpus_accel !=NULL && cpus_accel->create_vcpu_thread !=NULL ); - cpus_accel->create_vcpu_thread (cpu); +accel_create_vcpu_thread (NULL , cpu);while (!cpu->created) {qemu_cond_wait (&qemu_cpu_cond, &bql);
Signature · 1 line
2.49.0
PATCH v4 47/65 accel: Introduce AccelOpsClass::cpu_thread_routine handler
In reply to Philippe Mathieu-DaudéIn order to have a generic function creating threads, introduce the thread_precreate() and cpu_thread_routine() handlers.
--- include/system/accel-ops.h | 5 ++++- accel/accel-common.c | 16 +++++++++++++++- system/cpus.c | 2 +- 3 files changed, 20 insertions(+), 3 deletions(-)
include/system/accel-ops.h +4 -1
@@ -39,7 +39,10 @@ struct AccelOpsClass {bool (*cpu_target_realize)(CPUState *cpu,Error **errp);void (*cpu_reset_hold)(CPUState *cpu); -void (*create_vcpu_thread)(CPUState *cpu);/* MANDATORY NON-NULL */ +/* Either cpu_thread_routine() or create_vcpu_thread() is mandatory */ +void *(*cpu_thread_routine)(void *); +void (*thread_precreate)(CPUState *cpu); +void (*create_vcpu_thread)(CPUState *cpu);void (*kick_vcpu_thread)(CPUState *cpu);bool (*cpu_thread_is_idle)(CPUState *cpu);
accel/accel-common.c +15 -1
@@ -11,6 +11,7 @@#include "qemu/accel.h" #include "qemu/target-info.h" #include "system/accel-ops.h" +#include "system/cpus.h" #include "accel/accel-cpu.h" #include "accel-internal.h"
@@ -104,7 +105,20 @@ void accel_create_vcpu_thread(AccelState *accel, CPUState *cpu)if (ac->ops->create_vcpu_thread !=NULL ) { ac->ops->create_vcpu_thread (cpu); }else { -g_assert_not_reached (); +char thread_name[VCPU_THREAD_NAME_SIZE ]; + +assert (ac->name); +assert (ac->ops->cpu_thread_routine); + +if (ac->ops->thread_precreate) { + ac->ops->thread_precreate (cpu); + } + +snprintf (thread_name,VCPU_THREAD_NAME_SIZE ,"CPU %d/%s" , + cpu->cpu_index, ac->name); +qemu_thread_create (cpu->thread, thread_name, + ac->ops->cpu_thread_routine, + cpu,QEMU_THREAD_JOINABLE ); } }
system/cpus.c +1 -1
@@ -671,7 +671,7 @@ void cpu_remove_sync(CPUState *cpu)void cpus_register_accel (const AccelOpsClass *ops) {assert (ops !=NULL ); -assert (ops->create_vcpu_thread !=NULL );/* mandatory */ +assert (ops->create_vcpu_thread || ops->cpu_thread_routine); cpus_accel = ops; }
Signature · 1 line
2.49.0
Re: [PATCH v4 47/65] accel: Introduce AccelOpsClass::cpu_thread_routine handler
Quoted 7 lines · Philippe Mathieu-Daudé
In order to have a generic function creating threads, introduce the
thread_precreate()andcpu_thread_routine()handlers.
Quoted 8 lines
Signed-off-by Philippe Mathieu-Daudé <[email protected]>Reviewed-by Richard Henderson <[email protected]>---
include/system/accel-ops.h | 5 ++++- accel/accel-common.c | 16 +++++++++++++++- system/cpus.c | 2 +- 3 files changed, 20 insertions(+), 3 deletions(-)
PATCH v4 48/65 accel/dummy: Convert to AccelOpsClass::cpu_thread_routine
In reply to Philippe Mathieu-DaudéBy converting to AccelOpsClass::cpu_thread_routine we can let the common accel_create_vcpu_thread() create the thread.
--- accel/dummy-cpus.h | 2 +- accel/dummy-cpus.c | 14 +------------- accel/qtest/qtest.c | 3 ++- accel/xen/xen-all.c | 3 ++- 4 files changed, 6 insertions(+), 16 deletions(-)
accel/dummy-cpus.h +1 -1
@@ -10,6 +10,6 @@#define ACCEL_DUMMY_CPUS_H void dummy_thread_precreate (CPUState *cpu); -void dummy_start_vcpu_thread (CPUState *cpu); +void *dummy_cpu_thread_routine (void *arg);#endif
accel/dummy-cpus.c +1 -13
@@ -19,7 +19,7 @@#include "hw/core/cpu.h" #include "accel/dummy-cpus.h" -static void *dummy_cpu_thread_fn (void *arg) +void *dummy_cpu_thread_routine (void *arg) {CPUState *cpu = arg;
@@ -71,15 +71,3 @@ void dummy_thread_precreate(CPUState *cpu)qemu_sem_init (&cpu->sem,0 );#endif } - -void dummy_start_vcpu_thread (CPUState *cpu) -{ -char thread_name[VCPU_THREAD_NAME_SIZE ]; - -dummy_thread_precreate (cpu); - -snprintf (thread_name,VCPU_THREAD_NAME_SIZE ,"CPU %d/DUMMY" , - cpu->cpu_index); -qemu_thread_create (cpu->thread, thread_name, dummy_cpu_thread_fn, cpu, -QEMU_THREAD_JOINABLE ); -}
accel/qtest/qtest.c +2 -1
@@ -64,7 +64,8 @@ static void qtest_accel_ops_class_init(ObjectClass *oc, const void *data) {AccelOpsClass *ops =ACCEL_OPS_CLASS (oc); - ops->create_vcpu_thread = dummy_start_vcpu_thread; + ops->thread_precreate = dummy_thread_precreate; + ops->cpu_thread_routine = dummy_cpu_thread_routine; ops->get_virtual_clock = qtest_get_virtual_clock; ops->set_virtual_clock = qtest_set_virtual_clock; };
accel/xen/xen-all.c +2 -1
@@ -152,7 +152,8 @@ static void xen_accel_ops_class_init(ObjectClass *oc, const void *data) {AccelOpsClass *ops =ACCEL_OPS_CLASS (oc); - ops->create_vcpu_thread = dummy_start_vcpu_thread; + ops->thread_precreate = dummy_thread_precreate; + ops->cpu_thread_routine = dummy_cpu_thread_routine; }static const TypeInfo xen_accel_ops_type = {
Signature · 1 line
2.49.0
Re: [PATCH v4 48/65] accel/dummy: Convert to AccelOpsClass::cpu_thread_routine
Quoted 5 lines · Philippe Mathieu-Daudé
By converting to
AccelOpsClass::cpu_thread_routinewe can let the commonaccel_create_vcpu_thread()create the thread.Signed-off-by Philippe Mathieu-Daudé <[email protected]>Reviewed-by Richard Henderson <[email protected]>
PATCH v4 49/65 accel/tcg: Convert to AccelOpsClass::cpu_thread_routine
In reply to Philippe Mathieu-DaudéBy converting to AccelOpsClass::cpu_thread_routine we can let the common accel_create_vcpu_thread() create the thread.
--- accel/tcg/tcg-accel-ops-mttcg.h | 3 +-- accel/tcg/tcg-accel-ops-mttcg.c | 16 +--------------- accel/tcg/tcg-accel-ops.c | 3 ++- 3 files changed, 4 insertions(+), 18 deletions(-)
accel/tcg/tcg-accel-ops-mttcg.h +1 -2
@@ -13,7 +13,6 @@/* kick MTTCG vCPU thread */ void mttcg_kick_vcpu_thread (CPUState *cpu); -/* start an mttcg vCPU thread */ -void mttcg_start_vcpu_thread (CPUState *cpu); +void *mttcg_cpu_thread_routine (void *arg);#endif /* TCG_ACCEL_OPS_MTTCG_H */
accel/tcg/tcg-accel-ops-mttcg.c +1 -15
@@ -61,7 +61,7 @@ static void mttcg_force_rcu(Notifier *notify, void *data)* current CPUState for a given thread. */ -static void *mttcg_cpu_thread_fn (void *arg) +void *mttcg_cpu_thread_routine (void *arg) {MttcgForceRcuNotifier force_rcu;CPUState *cpu = arg;
@@ -128,17 +128,3 @@ void mttcg_kick_vcpu_thread(CPUState *cpu) {cpu_exit (cpu); } - -void mttcg_start_vcpu_thread (CPUState *cpu) -{ -char thread_name[VCPU_THREAD_NAME_SIZE ]; - -tcg_vcpu_thread_precreate (cpu); - -/* create a thread per vCPU with TCG (MTTCG) */ -snprintf (thread_name,VCPU_THREAD_NAME_SIZE ,"CPU %d/TCG" , - cpu->cpu_index); - -qemu_thread_create (cpu->thread, thread_name, mttcg_cpu_thread_fn, - cpu,QEMU_THREAD_JOINABLE ); -}
accel/tcg/tcg-accel-ops.c +2 -1
@@ -204,7 +204,7 @@ static void tcg_accel_ops_init(AccelClass *ac)AccelOpsClass *ops = ac->ops;if (qemu_tcg_mttcg_enabled ()) { - ops->create_vcpu_thread = mttcg_start_vcpu_thread; + ops->cpu_thread_routine = mttcg_cpu_thread_routine; ops->kick_vcpu_thread = mttcg_kick_vcpu_thread; ops->handle_interrupt = tcg_handle_interrupt; }else {
@@ -222,6 +222,7 @@ static void tcg_accel_ops_init(AccelClass *ac) ops->cpu_common_realize = tcg_exec_realizefn; ops->cpu_common_unrealize = tcg_exec_unrealizefn; + ops->thread_precreate = tcg_vcpu_thread_precreate; ops->cpu_reset_hold = tcg_cpu_reset_hold; ops->insert_breakpoint = tcg_insert_breakpoint; ops->remove_breakpoint = tcg_remove_breakpoint;
Signature · 1 line
2.49.0
PATCH v4 50/65 accel/hvf: Convert to AccelOpsClass::cpu_thread_routine
In reply to Philippe Mathieu-DaudéBy converting to AccelOpsClass::cpu_thread_routine we can let the common accel_create_vcpu_thread() create the thread.
--- accel/hvf/hvf-accel-ops.c | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-)
accel/hvf/hvf-accel-ops.c +1 -17
@@ -207,22 +207,6 @@ static void *hvf_cpu_thread_fn(void *arg)return NULL ; } -static void hvf_start_vcpu_thread (CPUState *cpu) -{ -char thread_name[VCPU_THREAD_NAME_SIZE ]; - -/* -* HVF currently does not support TCG, and only runs in -* unrestricted-guest mode. -*/ -assert (hvf_enabled ()); - -snprintf (thread_name,VCPU_THREAD_NAME_SIZE ,"CPU %d/HVF" , - cpu->cpu_index); -qemu_thread_create (cpu->thread, thread_name, hvf_cpu_thread_fn, - cpu,QEMU_THREAD_JOINABLE ); -} -struct hvf_sw_breakpoint *hvf_find_sw_breakpoint (CPUState *cpu,vaddr pc) {struct hvf_sw_breakpoint *bp;
@@ -369,7 +353,7 @@ static void hvf_accel_ops_class_init(ObjectClass *oc, const void *data) ops->cpu_target_realize = hvf_arch_cpu_realize; - ops->create_vcpu_thread = hvf_start_vcpu_thread; + ops->cpu_thread_routine = hvf_cpu_thread_fn, ops->kick_vcpu_thread = hvf_kick_vcpu_thread; ops->synchronize_post_reset = hvf_cpu_synchronize_post_reset;
Signature · 1 line
2.49.0
Re: [PATCH v4 50/65] accel/hvf: Convert to AccelOpsClass::cpu_thread_routine
Quoted 12 lines · Philippe Mathieu-Daudé
By converting to
AccelOpsClass::cpu_thread_routinewe can let the commonaccel_create_vcpu_thread()create the thread.Signed-off-by Philippe Mathieu-Daudé <[email protected]>Reviewed-by Richard Henderson <[email protected]>---
accel/hvf/hvf-accel-ops.c| 18 +-----------------1 file changed, 1 insertion(+), 17 deletions(-)
PATCH v4 51/65 accel/kvm: Convert to AccelOpsClass::cpu_thread_routine
In reply to Philippe Mathieu-DaudéBy converting to AccelOpsClass::cpu_thread_routine we can let the common accel_create_vcpu_thread() create the thread.
--- accel/kvm/kvm-accel-ops.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)
accel/kvm/kvm-accel-ops.c +1 -11
@@ -63,16 +63,6 @@ static void *kvm_vcpu_thread_fn(void *arg)return NULL ; } -static void kvm_start_vcpu_thread (CPUState *cpu) -{ -char thread_name[VCPU_THREAD_NAME_SIZE ]; - -snprintf (thread_name,VCPU_THREAD_NAME_SIZE ,"CPU %d/KVM" , - cpu->cpu_index); -qemu_thread_create (cpu->thread, thread_name, kvm_vcpu_thread_fn, - cpu,QEMU_THREAD_JOINABLE ); -} -static bool kvm_vcpu_thread_is_idle (CPUState *cpu) {return !kvm_halt_in_kernel ();
@@ -89,7 +79,7 @@ static void kvm_accel_ops_class_init(ObjectClass *oc, const void *data) {AccelOpsClass *ops =ACCEL_OPS_CLASS (oc); - ops->create_vcpu_thread = kvm_start_vcpu_thread; + ops->cpu_thread_routine = kvm_vcpu_thread_fn; ops->cpu_thread_is_idle = kvm_vcpu_thread_is_idle; ops->synchronize_post_reset = kvm_cpu_synchronize_post_reset; ops->synchronize_post_init = kvm_cpu_synchronize_post_init;
Signature · 1 line
2.49.0
Re: [PATCH v4 51/65] accel/kvm: Convert to AccelOpsClass::cpu_thread_routine
Quoted 12 lines · Philippe Mathieu-Daudé
By converting to
AccelOpsClass::cpu_thread_routinewe can let the commonaccel_create_vcpu_thread()create the thread.Signed-off-by Philippe Mathieu-Daudé <[email protected]>Reviewed-by Richard Henderson <[email protected]>---
accel/kvm/kvm-accel-ops.c| 12 +-----------1 file changed, 1 insertion(+), 11 deletions(-)
PATCH v4 52/65 accel/nvmm: Convert to AccelOpsClass::cpu_thread_routine
In reply to Philippe Mathieu-DaudéBy converting to AccelOpsClass::cpu_thread_routine we can let the common accel_create_vcpu_thread() create the thread.
--- target/i386/nvmm/nvmm-accel-ops.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)
target/i386/nvmm/nvmm-accel-ops.c +1 -11
@@ -61,16 +61,6 @@ static void *qemu_nvmm_cpu_thread_fn(void *arg)return NULL ; } -static void nvmm_start_vcpu_thread (CPUState *cpu) -{ -char thread_name[VCPU_THREAD_NAME_SIZE ]; - -snprintf (thread_name,VCPU_THREAD_NAME_SIZE ,"CPU %d/NVMM" , - cpu->cpu_index); -qemu_thread_create (cpu->thread, thread_name, qemu_nvmm_cpu_thread_fn, - cpu,QEMU_THREAD_JOINABLE ); -} -/* * Abort the call to run the virtual processor by another thread, and to * return the control to that thread.
@@ -85,7 +75,7 @@ static void nvmm_accel_ops_class_init(ObjectClass *oc, const void *data) {AccelOpsClass *ops =ACCEL_OPS_CLASS (oc); - ops->create_vcpu_thread = nvmm_start_vcpu_thread; + ops->cpu_thread_routine = qemu_nvmm_cpu_thread_fn; ops->kick_vcpu_thread = nvmm_kick_vcpu_thread; ops->synchronize_post_reset = nvmm_cpu_synchronize_post_reset;
Signature · 1 line
2.49.0
PATCH v4 53/65 accel/whpx: Convert to AccelOpsClass::cpu_thread_routine
In reply to Philippe Mathieu-DaudéBy converting to AccelOpsClass::cpu_thread_routine we can let the common accel_create_vcpu_thread() create the thread.
--- target/i386/whpx/whpx-accel-ops.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)
target/i386/whpx/whpx-accel-ops.c +1 -11
@@ -61,16 +61,6 @@ static void *whpx_cpu_thread_fn(void *arg)return NULL ; } -static void whpx_start_vcpu_thread (CPUState *cpu) -{ -char thread_name[VCPU_THREAD_NAME_SIZE ]; - -snprintf (thread_name,VCPU_THREAD_NAME_SIZE ,"CPU %d/WHPX" , - cpu->cpu_index); -qemu_thread_create (cpu->thread, thread_name, whpx_cpu_thread_fn, - cpu,QEMU_THREAD_JOINABLE ); -} -static void whpx_kick_vcpu_thread (CPUState *cpu) {if (!qemu_cpu_is_self (cpu)) {
@@ -87,7 +77,7 @@ static void whpx_accel_ops_class_init(ObjectClass *oc, const void *data) {AccelOpsClass *ops =ACCEL_OPS_CLASS (oc); - ops->create_vcpu_thread = whpx_start_vcpu_thread; + ops->cpu_thread_routine = whpx_cpu_thread_fn; ops->kick_vcpu_thread = whpx_kick_vcpu_thread; ops->cpu_thread_is_idle = whpx_vcpu_thread_is_idle;
Signature · 1 line
2.49.0
PATCH v4 54/65 accel: Factor accel_cpu_realize() out
In reply to Philippe Mathieu-DaudéFactor accel_cpu_realize() out of accel_cpu_common_realize() for re-use.
--- accel/accel-internal.h | 2 ++ accel/accel-common.c | 8 ++++++-- 2 files changed, 8 insertions(+), 2 deletions(-)
accel/accel-internal.h +2 -0
@@ -14,4 +14,6 @@void accel_init_ops_interfaces (AccelClass *ac); +bool accel_cpu_realize (AccelState *accel,CPUState *cpu,Error **errp); +#endif /* ACCEL_SYSTEM_H */
accel/accel-common.c +6 -2
@@ -122,9 +122,8 @@ void accel_create_vcpu_thread(AccelState *accel, CPUState *cpu) } } -bool accel_cpu_common_realize (CPUState *cpu,Error **errp) +bool accel_cpu_realize (AccelState *accel,CPUState *cpu,Error **errp) { -AccelState *accel =current_accel ();AccelClass *acc =ACCEL_GET_CLASS (accel);/* target specific realization */
@@ -147,6 +146,11 @@ bool accel_cpu_common_realize(CPUState *cpu, Error **errp)return true; } +bool accel_cpu_common_realize (CPUState *cpu,Error **errp) +{ +return accel_cpu_realize (current_accel (), cpu, errp); +} +void accel_cpu_common_unrealize (CPUState *cpu) {AccelState *accel =current_accel ();
Signature · 1 line
2.49.0
PATCH v4 55/65 accel: Pass old/new interrupt mask to handle_interrupt() handler
In reply to Philippe Mathieu-DaudéUpdate CPUState::interrupt_request once in cpu_interrupt(). Pass the old and new masks along.
--- accel/tcg/tcg-accel-ops-icount.h | 2 +- accel/tcg/tcg-accel-ops.h | 2 +- include/system/accel-ops.h | 2 +- accel/tcg/tcg-accel-ops-icount.c | 8 +++----- accel/tcg/tcg-accel-ops.c | 4 +--- system/cpus.c | 12 +++++++----- 6 files changed, 14 insertions(+), 16 deletions(-)
accel/tcg/tcg-accel-ops-icount.h +1 -1
@@ -15,6 +15,6 @@ void icount_prepare_for_run(CPUState *cpu, int64_t cpu_budget);int64_t icount_percpu_budget (int cpu_count);void icount_process_data (CPUState *cpu); -void icount_handle_interrupt (CPUState *cpu,int mask); +void icount_handle_interrupt (CPUState *cpu,int old_mask,int new_mask);#endif /* TCG_ACCEL_OPS_ICOUNT_H */
accel/tcg/tcg-accel-ops.h +1 -1
@@ -17,7 +17,7 @@void tcg_vcpu_thread_precreate (CPUState *cpu);void tcg_cpu_destroy (CPUState *cpu);int tcg_cpu_exec (CPUState *cpu); -void tcg_handle_interrupt (CPUState *cpu,int mask); +void tcg_handle_interrupt (CPUState *cpu,int old_mask,int new_mask);void tcg_cpu_init_cflags (CPUState *cpu,bool parallel);#endif /* TCG_ACCEL_OPS_H */
include/system/accel-ops.h +1 -1
@@ -67,7 +67,7 @@ struct AccelOpsClass {void (*synchronize_state)(CPUState *cpu);void (*synchronize_pre_loadvm)(CPUState *cpu); -void (*handle_interrupt)(CPUState *cpu,int mask); +void (*handle_interrupt)(CPUState *cpu,int old_mask,int new_mask);/* get_vcpu_stats: Append statistics of this @cpu to @buf */ void (*get_vcpu_stats)(CPUState *cpu,GString *buf);
accel/tcg/tcg-accel-ops-icount.c +3 -5
@@ -147,14 +147,12 @@ void icount_process_data(CPUState *cpu)replay_mutex_unlock (); } -void icount_handle_interrupt (CPUState *cpu,int mask) +void icount_handle_interrupt (CPUState *cpu,int old_mask,int new_mask) { -int old_mask = cpu->interrupt_request; - -tcg_handle_interrupt (cpu, mask); +tcg_handle_interrupt (cpu, old_mask, new_mask);if (qemu_cpu_is_self (cpu) && !cpu->neg.can_do_io - && (mask & ~old_mask) !=0 ) { + && (new_mask & ~old_mask) !=0 ) {cpu_abort (cpu,"Raised interrupt while not in I/O function" ); } }
accel/tcg/tcg-accel-ops.c +1 -3
@@ -99,10 +99,8 @@ static void tcg_cpu_reset_hold(CPUState *cpu) }/* mask must never be zero, except for A20 change call */ -void tcg_handle_interrupt (CPUState *cpu,int mask) +void tcg_handle_interrupt (CPUState *cpu,int old_mask,int new_mask) { - cpu->interrupt_request |= mask; -/* * If called from iothread context, wake the target cpu in * case its halted.
system/cpus.c +7 -5
@@ -246,10 +246,8 @@ int64_t cpus_get_elapsed_ticks(void)return cpu_get_ticks (); } -static void generic_handle_interrupt (CPUState *cpu,int mask) +static void generic_handle_interrupt (CPUState *cpu,int old_mask,int new_mask) { - cpu->interrupt_request |= mask; -if (!qemu_cpu_is_self (cpu)) {qemu_cpu_kick (cpu); }
@@ -257,12 +255,16 @@ static void generic_handle_interrupt(CPUState *cpu, int mask)void cpu_interrupt (CPUState *cpu,int mask) { +int old_mask = cpu->interrupt_request; +g_assert (bql_locked ()); + cpu->interrupt_request |= mask; +if (cpus_accel->handle_interrupt) { - cpus_accel->handle_interrupt (cpu, mask); + cpus_accel->handle_interrupt (cpu, old_mask, cpu->interrupt_request); }else { -generic_handle_interrupt (cpu, mask); +generic_handle_interrupt (cpu, old_mask, cpu->interrupt_request); } }
Signature · 1 line
2.49.0
PATCH v4 56/65 accel: Expose and register generic_handle_interrupt()
In reply to Philippe Mathieu-DaudéIn order to dispatch over AccelOpsClass::handle_interrupt(), we need it always defined, not calling a hidden handler under the hood. Make AccelOpsClass::handle_interrupt() mandatory. Expose generic_handle_interrupt() prototype and register it for each accelerator.
--- include/system/accel-ops.h | 3 +++ accel/hvf/hvf-accel-ops.c | 1 + accel/kvm/kvm-accel-ops.c | 1 + accel/qtest/qtest.c | 1 + accel/xen/xen-all.c | 1 + system/cpus.c | 9 +++------ target/i386/nvmm/nvmm-accel-ops.c | 1 + target/i386/whpx/whpx-accel-ops.c | 1 + 8 files changed, 12 insertions(+), 6 deletions(-)
include/system/accel-ops.h +3 -0
@@ -67,6 +67,7 @@ struct AccelOpsClass {void (*synchronize_state)(CPUState *cpu);void (*synchronize_pre_loadvm)(CPUState *cpu); +/* handle_interrupt is mandatory. */ void (*handle_interrupt)(CPUState *cpu,int old_mask,int new_mask);/* get_vcpu_stats: Append statistics of this @cpu to @buf */
@@ -93,4 +94,6 @@ struct AccelOpsClass { void (*remove_all_breakpoints)(CPUState *cpu); }; +void generic_handle_interrupt (CPUState *cpu,int old_mask,int new_mask); +#endif /* ACCEL_OPS_H */
accel/hvf/hvf-accel-ops.c +1 -0
@@ -355,6 +355,7 @@ static void hvf_accel_ops_class_init(ObjectClass *oc, const void *data) ops->cpu_thread_routine = hvf_cpu_thread_fn, ops->kick_vcpu_thread = hvf_kick_vcpu_thread; + ops->handle_interrupt = generic_handle_interrupt; ops->synchronize_post_reset = hvf_cpu_synchronize_post_reset; ops->synchronize_post_init = hvf_cpu_synchronize_post_init;
accel/kvm/kvm-accel-ops.c +1 -0
@@ -85,6 +85,7 @@ static void kvm_accel_ops_class_init(ObjectClass *oc, const void *data) ops->synchronize_post_init = kvm_cpu_synchronize_post_init; ops->synchronize_state = kvm_cpu_synchronize_state; ops->synchronize_pre_loadvm = kvm_cpu_synchronize_pre_loadvm; + ops->handle_interrupt = generic_handle_interrupt;#ifdef TARGET_KVM_HAVE_GUEST_DEBUG ops->update_guest_debug = kvm_update_guest_debug_ops;
accel/qtest/qtest.c +1 -0
@@ -68,6 +68,7 @@ static void qtest_accel_ops_class_init(ObjectClass *oc, const void *data) ops->cpu_thread_routine = dummy_cpu_thread_routine; ops->get_virtual_clock = qtest_get_virtual_clock; ops->set_virtual_clock = qtest_set_virtual_clock; + ops->handle_interrupt = generic_handle_interrupt; };static const TypeInfo qtest_accel_ops_type = {
accel/xen/xen-all.c +1 -0
@@ -154,6 +154,7 @@ static void xen_accel_ops_class_init(ObjectClass *oc, const void *data) ops->thread_precreate = dummy_thread_precreate; ops->cpu_thread_routine = dummy_cpu_thread_routine; + ops->handle_interrupt = generic_handle_interrupt; }static const TypeInfo xen_accel_ops_type = {
system/cpus.c +3 -6
@@ -246,7 +246,7 @@ int64_t cpus_get_elapsed_ticks(void)return cpu_get_ticks (); } -static void generic_handle_interrupt (CPUState *cpu,int old_mask,int new_mask) +void generic_handle_interrupt (CPUState *cpu,int old_mask,int new_mask) {if (!qemu_cpu_is_self (cpu)) {qemu_cpu_kick (cpu);
@@ -261,11 +261,7 @@ void cpu_interrupt(CPUState *cpu, int mask) cpu->interrupt_request |= mask; -if (cpus_accel->handle_interrupt) { - cpus_accel->handle_interrupt (cpu, old_mask, cpu->interrupt_request); - }else { -generic_handle_interrupt (cpu, old_mask, cpu->interrupt_request); - } + cpus_accel->handle_interrupt (cpu, old_mask, cpu->interrupt_request); }/*
@@ -674,6 +670,7 @@ void cpus_register_accel(const AccelOpsClass *ops) {assert (ops !=NULL );assert (ops->create_vcpu_thread || ops->cpu_thread_routine); +assert (ops->handle_interrupt); cpus_accel = ops; }
target/i386/nvmm/nvmm-accel-ops.c +1 -0
@@ -77,6 +77,7 @@ static void nvmm_accel_ops_class_init(ObjectClass *oc, const void *data) ops->cpu_thread_routine = qemu_nvmm_cpu_thread_fn; ops->kick_vcpu_thread = nvmm_kick_vcpu_thread; + ops->handle_interrupt = generic_handle_interrupt; ops->synchronize_post_reset = nvmm_cpu_synchronize_post_reset; ops->synchronize_post_init = nvmm_cpu_synchronize_post_init;
target/i386/whpx/whpx-accel-ops.c +1 -0
@@ -80,6 +80,7 @@ static void whpx_accel_ops_class_init(ObjectClass *oc, const void *data) ops->cpu_thread_routine = whpx_cpu_thread_fn; ops->kick_vcpu_thread = whpx_kick_vcpu_thread; ops->cpu_thread_is_idle = whpx_vcpu_thread_is_idle; + ops->handle_interrupt = generic_handle_interrupt; ops->synchronize_post_reset = whpx_cpu_synchronize_post_reset; ops->synchronize_post_init = whpx_cpu_synchronize_post_init;
Signature · 1 line
2.49.0
Re: [PATCH v4 56/65] accel: Expose and register generic_handle_interrupt()
Quoted 8 lines · Philippe Mathieu-Daudé
In order to dispatch over
AccelOpsClass::handle_interrupt(), we need it always defined, not calling a hidden handler under the hood. MakeAccelOpsClass::handle_interrupt()mandatory. Exposegeneric_handle_interrupt()prototype and register it for each accelerator.Suggested-by Richard Henderson <[email protected]>Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Quoted 10 lines
--- include/system/accel-ops.h | 3 +++ accel/hvf/hvf-accel-ops.c | 1 + accel/kvm/kvm-accel-ops.c | 1 + accel/qtest/qtest.c | 1 + accel/xen/xen-all.c | 1 + system/cpus.c | 9 +++------ target/i386/nvmm/nvmm-accel-ops.c | 1 + target/i386/whpx/whpx-accel-ops.c | 1 + 8 files changed, 12 insertions(+), 6 deletions(-)
Re: [PATCH v4 56/65] accel: Expose and register generic_handle_interrupt()
In reply to Philippe Mathieu-DaudéQuoted 14 lines · Philippe Mathieu-Daudé
Date: Wed, 2 Jul 2025 20:53:18 +0200
From: Philippe Mathieu-Daudé <[email protected]>
Subject: [PATCH v4 56/65] accel: Expose and register
generic_handle_interrupt()
X-Mailer: git-send-email 2.49.0In order to dispatch over
AccelOpsClass::handle_interrupt(), we need it always defined, not calling a hidden handler under the hood. MakeAccelOpsClass::handle_interrupt()mandatory. Exposegeneric_handle_interrupt()prototype and register it for each accelerator.Suggested-by Richard Henderson <[email protected]>Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Quoted 10 lines
--- include/system/accel-ops.h | 3 +++ accel/hvf/hvf-accel-ops.c | 1 + accel/kvm/kvm-accel-ops.c | 1 + accel/qtest/qtest.c | 1 + accel/xen/xen-all.c | 1 + system/cpus.c | 9 +++------ target/i386/nvmm/nvmm-accel-ops.c | 1 + target/i386/whpx/whpx-accel-ops.c | 1 + 8 files changed, 12 insertions(+), 6 deletions(-)
Re: [PATCH v4 56/65] accel: Expose and register generic_handle_interrupt()
In reply to Philippe Mathieu-DaudéQuoted 12 lines · Philippe Mathieu-Daudé
In order to dispatch over
AccelOpsClass::handle_interrupt(), we need it always defined, not calling a hidden handler under the hood. MakeAccelOpsClass::handle_interrupt()mandatory. Exposegeneric_handle_interrupt()prototype and register it for each accelerator.Suggested-by Richard Henderson <[email protected]>Signed-off-by Philippe Mathieu-Daudé <[email protected]>---
Quoted 10 lines
include/system/accel-ops.h | 3 +++ accel/hvf/hvf-accel-ops.c | 1 + accel/kvm/kvm-accel-ops.c | 1 + accel/qtest/qtest.c | 1 + accel/xen/xen-all.c | 1 + system/cpus.c | 9 +++------ target/i386/nvmm/nvmm-accel-ops.c | 1 + target/i386/whpx/whpx-accel-ops.c | 1 + 8 files changed, 12 insertions(+), 6 deletions(-)
PATCH v4 57/65 accel: Always register AccelOpsClass::kick_vcpu_thread() handler
In reply to Philippe Mathieu-DaudéIn order to dispatch over AccelOpsClass::kick_vcpu_thread(), we need it always defined, not calling a hidden handler under the hood. Make AccelOpsClass::kick_vcpu_thread() mandatory. Register the default cpus_kick_thread() for each accelerator.
--- include/system/accel-ops.h | 1 + accel/kvm/kvm-accel-ops.c | 1 + accel/qtest/qtest.c | 1 + accel/xen/xen-all.c | 1 + system/cpus.c | 7 ++----- 5 files changed, 6 insertions(+), 5 deletions(-)
include/system/accel-ops.h +1 -0
@@ -43,6 +43,7 @@ struct AccelOpsClass {void *(*cpu_thread_routine)(void *);void (*thread_precreate)(CPUState *cpu);void (*create_vcpu_thread)(CPUState *cpu); +/* kick_vcpu_thread is mandatory. */ void (*kick_vcpu_thread)(CPUState *cpu);bool (*cpu_thread_is_idle)(CPUState *cpu);
accel/kvm/kvm-accel-ops.c +1 -0
@@ -81,6 +81,7 @@ static void kvm_accel_ops_class_init(ObjectClass *oc, const void *data) ops->cpu_thread_routine = kvm_vcpu_thread_fn; ops->cpu_thread_is_idle = kvm_vcpu_thread_is_idle; + ops->kick_vcpu_thread = cpus_kick_thread; ops->synchronize_post_reset = kvm_cpu_synchronize_post_reset; ops->synchronize_post_init = kvm_cpu_synchronize_post_init; ops->synchronize_state = kvm_cpu_synchronize_state;
accel/qtest/qtest.c +1 -0
@@ -66,6 +66,7 @@ static void qtest_accel_ops_class_init(ObjectClass *oc, const void *data) ops->thread_precreate = dummy_thread_precreate; ops->cpu_thread_routine = dummy_cpu_thread_routine; + ops->kick_vcpu_thread = cpus_kick_thread; ops->get_virtual_clock = qtest_get_virtual_clock; ops->set_virtual_clock = qtest_set_virtual_clock; ops->handle_interrupt = generic_handle_interrupt;
accel/xen/xen-all.c +1 -0
@@ -154,6 +154,7 @@ static void xen_accel_ops_class_init(ObjectClass *oc, const void *data) ops->thread_precreate = dummy_thread_precreate; ops->cpu_thread_routine = dummy_cpu_thread_routine; + ops->kick_vcpu_thread = cpus_kick_thread; ops->handle_interrupt = generic_handle_interrupt; }
system/cpus.c +2 -5
@@ -486,11 +486,7 @@ void cpus_kick_thread(CPUState *cpu)void qemu_cpu_kick (CPUState *cpu) {qemu_cond_broadcast (cpu->halt_cond); -if (cpus_accel->kick_vcpu_thread) { - cpus_accel->kick_vcpu_thread (cpu); - }else {/* default */ -cpus_kick_thread (cpu); - } + cpus_accel->kick_vcpu_thread (cpu); }void qemu_cpu_kick_self (void )
@@ -670,6 +666,7 @@ void cpus_register_accel(const AccelOpsClass *ops) {assert (ops !=NULL );assert (ops->create_vcpu_thread || ops->cpu_thread_routine); +assert (ops->kick_vcpu_thread);assert (ops->handle_interrupt); cpus_accel = ops; }
Signature · 1 line
2.49.0
Re: [PATCH v4 57/65] accel: Always register AccelOpsClass::kick_vcpu_thread() handler
Quoted 5 lines · Philippe Mathieu-Daudé
In order to dispatch over
AccelOpsClass::kick_vcpu_thread(), we need it always defined, not calling a hidden handler under the hood. MakeAccelOpsClass::kick_vcpu_thread()mandatory. Register the defaultcpus_kick_thread()for each accelerator.
Quoted 8 lines
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- include/system/accel-ops.h | 1 + accel/kvm/kvm-accel-ops.c | 1 + accel/qtest/qtest.c | 1 + accel/xen/xen-all.c | 1 + system/cpus.c | 7 ++----- 5 files changed, 6 insertions(+), 5 deletions(-)
Sounds good.
Unrelated, but I noticed that hvf_kick_vcpu_thread uses hv_vcpus_exit [1] on x86 and hv_vcpu_interrupt [2] on arm64. I'm not even sure what's the difference when reading the Apple doc, except that exit existed before interrupt.
[1] https://developer.apple.com/documentation/hypervisor/hv_vcpus_exit(_:_:)
[2] https://developer.apple.com/documentation/hypervisor/hv_vcpu_interrupt(_:_:)
It might be worth moving x86 to use interrupt also, in a future series.
Regards,
Pierrick
Re: [PATCH v4 57/65] accel: Always register AccelOpsClass::kick_vcpu_thread() handler
Quoted 15 lines · Pierrick Bouvier
Quoted 5 lines · Philippe Mathieu-Daudé
In order to dispatch over
AccelOpsClass::kick_vcpu_thread(), we need it always defined, not calling a hidden handler under the hood. MakeAccelOpsClass::kick_vcpu_thread()mandatory. Register the defaultcpus_kick_thread()for each accelerator.Quoted 8 lines
Signed-off-by Philippe Mathieu-Daudé <[email protected]>---
include/system/accel-ops.h| 1 +
accel/kvm/kvm-accel-ops.c | 1 +
accel/qtest/qtest.c | 1 +
accel/xen/xen-all.c | 1 +
system/cpus.c | 7 ++-----5 files changed, 6 insertions(+), 5 deletions(-)
Quoted 7 lines
Sounds good.
Reviewed-by Pierrick Bouvier <[email protected]>Unrelated, but I noticed that
hvf_kick_vcpu_threaduseshv_vcpus_exit[1] on x86 andhv_vcpu_interrupt[2] on arm64. I'm not even sure what's the difference when reading the Apple doc, except that exit existed before interrupt.
[1] https://developer.apple.com/documentation/hypervisor/hv_vcpus_exit(_:_:)
This is the "Apple Silicon" documentation,
Quoted 1 line
[2] https://developer.apple.com/documentation/hypervisor/
hv_vcpu_interrupt(_:_:)
and the "Intel-based Mac" one ;)
Quoted 5 lines
It might be worth moving x86 to use interrupt also, in a future series.
Regards,
Pierrick
Re: [PATCH v4 57/65] accel: Always register AccelOpsClass::kick_vcpu_thread() handler
In reply to Philippe Mathieu-DaudéQuoted 11 lines · Philippe Mathieu-Daudé
Date: Wed, 2 Jul 2025 20:53:19 +0200
From: Philippe Mathieu-Daudé <[email protected]>
Subject: [PATCH v4 57/65] accel: Always register
AccelOpsClass::kick_vcpu_thread()handler
X-Mailer: git-send-email 2.49.0In order to dispatch over
AccelOpsClass::kick_vcpu_thread(), we need it always defined, not calling a hidden handler under the hood. MakeAccelOpsClass::kick_vcpu_thread()mandatory. Register the defaultcpus_kick_thread()for each accelerator.
Quoted 8 lines
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- include/system/accel-ops.h | 1 + accel/kvm/kvm-accel-ops.c | 1 + accel/qtest/qtest.c | 1 + accel/xen/xen-all.c | 1 + system/cpus.c | 7 ++----- 5 files changed, 6 insertions(+), 5 deletions(-)
PATCH v4 58/65 accel: Always register AccelOpsClass::get_elapsed_ticks() handler
In reply to Philippe Mathieu-DaudéIn order to dispatch over AccelOpsClass::get_elapsed_ticks(), we need it always defined, not calling a hidden handler under the hood. Make AccelOpsClass::get_elapsed_ticks() mandatory. Register the default cpus_kick_thread() for each accelerator.
--- include/system/accel-ops.h | 1 + accel/hvf/hvf-accel-ops.c | 2 ++ accel/kvm/kvm-accel-ops.c | 3 +++ accel/qtest/qtest.c | 2 ++ accel/tcg/tcg-accel-ops.c | 3 +++ accel/xen/xen-all.c | 2 ++ system/cpus.c | 6 ++---- target/i386/nvmm/nvmm-accel-ops.c | 3 +++ target/i386/whpx/whpx-accel-ops.c | 3 +++ 9 files changed, 21 insertions(+), 4 deletions(-)
include/system/accel-ops.h +1 -0
@@ -86,6 +86,7 @@ struct AccelOpsClass {int64_t (*get_virtual_clock)(void );void (*set_virtual_clock)(int64_t time); +/* get_elapsed_ticks is mandatory. */ int64_t (*get_elapsed_ticks)(void );/* gdbstub hooks */
accel/hvf/hvf-accel-ops.c +2 -0
@@ -54,6 +54,7 @@#include "gdbstub/enums.h" #include "exec/cpu-common.h" #include "system/accel-ops.h" +#include "system/cpu-timers.h" #include "system/cpus.h" #include "system/hvf.h" #include "system/hvf_int.h"
@@ -367,6 +368,7 @@ static void hvf_accel_ops_class_init(ObjectClass *oc, const void *data) ops->remove_all_breakpoints = hvf_remove_all_breakpoints; ops->update_guest_debug = hvf_update_guest_debug; + ops->get_elapsed_ticks = cpu_get_ticks; ops->get_vcpu_stats = hvf_get_vcpu_stats; };
accel/kvm/kvm-accel-ops.c +3 -0
@@ -17,6 +17,7 @@#include "qemu/error-report.h" #include "qemu/main-loop.h" #include "system/accel-ops.h" +#include "system/cpu-timers.h" #include "system/kvm.h" #include "system/kvm_int.h" #include "system/runstate.h"
@@ -94,6 +95,8 @@ static void kvm_accel_ops_class_init(ObjectClass *oc, const void *data) ops->remove_breakpoint = kvm_remove_breakpoint; ops->remove_all_breakpoints = kvm_remove_all_breakpoints;#endif + + ops->get_elapsed_ticks = cpu_get_ticks; }static const TypeInfo kvm_accel_ops_type = {
accel/qtest/qtest.c +2 -0
@@ -20,6 +20,7 @@#include "qemu/accel.h" #include "system/accel-ops.h" #include "system/qtest.h" +#include "system/cpu-timers.h" #include "system/cpus.h" #include "qemu/guest-random.h" #include "qemu/main-loop.h"
@@ -67,6 +68,7 @@ static void qtest_accel_ops_class_init(ObjectClass *oc, const void *data) ops->thread_precreate = dummy_thread_precreate; ops->cpu_thread_routine = dummy_cpu_thread_routine; ops->kick_vcpu_thread = cpus_kick_thread; + ops->get_elapsed_ticks = cpu_get_ticks; ops->get_virtual_clock = qtest_get_virtual_clock; ops->set_virtual_clock = qtest_set_virtual_clock; ops->handle_interrupt = generic_handle_interrupt;
accel/tcg/tcg-accel-ops.c +3 -0
@@ -27,6 +27,7 @@#include "qemu/osdep.h" #include "system/accel-ops.h" +#include "system/cpu-timers.h" #include "system/tcg.h" #include "system/replay.h" #include "exec/icount.h"
@@ -205,6 +206,7 @@ static void tcg_accel_ops_init(AccelClass *ac) ops->cpu_thread_routine = mttcg_cpu_thread_routine; ops->kick_vcpu_thread = mttcg_kick_vcpu_thread; ops->handle_interrupt = tcg_handle_interrupt; + ops->get_elapsed_ticks = cpu_get_ticks; }else { ops->create_vcpu_thread = rr_start_vcpu_thread; ops->kick_vcpu_thread = rr_kick_vcpu_thread;
@@ -215,6 +217,7 @@ static void tcg_accel_ops_init(AccelClass *ac) ops->get_elapsed_ticks = icount_get; }else { ops->handle_interrupt = tcg_handle_interrupt; + ops->get_elapsed_ticks = cpu_get_ticks; } }
accel/xen/xen-all.c +2 -0
@@ -20,6 +20,7 @@#include "qemu/accel.h" #include "accel/dummy-cpus.h" #include "system/accel-ops.h" +#include "system/cpu-timers.h" #include "system/cpus.h" #include "system/xen.h" #include "system/runstate.h"
@@ -156,6 +157,7 @@ static void xen_accel_ops_class_init(ObjectClass *oc, const void *data) ops->cpu_thread_routine = dummy_cpu_thread_routine; ops->kick_vcpu_thread = cpus_kick_thread; ops->handle_interrupt = generic_handle_interrupt; + ops->get_elapsed_ticks = cpu_get_ticks; }static const TypeInfo xen_accel_ops_type = {
system/cpus.c +2 -4
@@ -240,10 +240,7 @@ void cpus_set_virtual_clock(int64_t new_time)*/ int64_t cpus_get_elapsed_ticks (void ) { -if (cpus_accel->get_elapsed_ticks) { -return cpus_accel->get_elapsed_ticks (); - } -return cpu_get_ticks (); +return cpus_accel->get_elapsed_ticks (); }void generic_handle_interrupt (CPUState *cpu,int old_mask,int new_mask)
@@ -668,6 +665,7 @@ void cpus_register_accel(const AccelOpsClass *ops)assert (ops->create_vcpu_thread || ops->cpu_thread_routine);assert (ops->kick_vcpu_thread);assert (ops->handle_interrupt); +assert (ops->get_elapsed_ticks); cpus_accel = ops; }
target/i386/nvmm/nvmm-accel-ops.c +3 -0
@@ -11,6 +11,7 @@#include "system/kvm_int.h" #include "qemu/main-loop.h" #include "system/accel-ops.h" +#include "system/cpu-timers.h" #include "system/cpus.h" #include "qemu/guest-random.h"
@@ -83,6 +84,8 @@ static void nvmm_accel_ops_class_init(ObjectClass *oc, const void *data) ops->synchronize_post_init = nvmm_cpu_synchronize_post_init; ops->synchronize_state = nvmm_cpu_synchronize_state; ops->synchronize_pre_loadvm = nvmm_cpu_synchronize_pre_loadvm; + + ops->get_elapsed_ticks = cpu_get_ticks; }static const TypeInfo nvmm_accel_ops_type = {
target/i386/whpx/whpx-accel-ops.c +3 -0
@@ -12,6 +12,7 @@#include "system/kvm_int.h" #include "qemu/main-loop.h" #include "system/accel-ops.h" +#include "system/cpu-timers.h" #include "system/cpus.h" #include "qemu/guest-random.h"
@@ -86,6 +87,8 @@ static void whpx_accel_ops_class_init(ObjectClass *oc, const void *data) ops->synchronize_post_init = whpx_cpu_synchronize_post_init; ops->synchronize_state = whpx_cpu_synchronize_state; ops->synchronize_pre_loadvm = whpx_cpu_synchronize_pre_loadvm; + + ops->get_elapsed_ticks = cpu_get_ticks; }static const TypeInfo whpx_accel_ops_type = {
Signature · 1 line
2.49.0
Re: [PATCH v4 58/65] accel: Always register AccelOpsClass::get_elapsed_ticks() handler
Quoted 4 lines · Philippe Mathieu-Daudé
In order to dispatch over
AccelOpsClass::get_elapsed_ticks(), we need it always defined, not calling a hidden handler under the hood. MakeAccelOpsClass::get_elapsed_ticks()mandatory. Register the defaultcpus_kick_thread()for each accelerator.
Missing a replace when copied from previous description.
Quoted 13 lines
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- include/system/accel-ops.h | 1 + accel/hvf/hvf-accel-ops.c | 2 ++ accel/kvm/kvm-accel-ops.c | 3 +++ accel/qtest/qtest.c | 2 ++ accel/tcg/tcg-accel-ops.c | 3 +++ accel/xen/xen-all.c | 2 ++ system/cpus.c | 6 ++---- target/i386/nvmm/nvmm-accel-ops.c | 3 +++ target/i386/whpx/whpx-accel-ops.c | 3 +++ 9 files changed, 21 insertions(+), 4 deletions(-)
Re: [PATCH v4 58/65] accel: Always register AccelOpsClass::get_elapsed_ticks() handler
In reply to Philippe Mathieu-DaudéQuoted 12 lines · Philippe Mathieu-Daudé
Date: Wed, 2 Jul 2025 20:53:20 +0200
From: Philippe Mathieu-Daudé <[email protected]>
Subject: [PATCH v4 58/65] accel: Always register
AccelOpsClass::get_elapsed_ticks()handler
X-Mailer: git-send-email 2.49.0In order to dispatch over
AccelOpsClass::get_elapsed_ticks(), we need it always defined, not calling a hidden handler under the hood. MakeAccelOpsClass::get_elapsed_ticks()mandatory. Register the defaultcpus_kick_thread()for each accelerator.Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Quoted 11 lines
--- include/system/accel-ops.h | 1 + accel/hvf/hvf-accel-ops.c | 2 ++ accel/kvm/kvm-accel-ops.c | 3 +++ accel/qtest/qtest.c | 2 ++ accel/tcg/tcg-accel-ops.c | 3 +++ accel/xen/xen-all.c | 2 ++ system/cpus.c | 6 ++---- target/i386/nvmm/nvmm-accel-ops.c | 3 +++ target/i386/whpx/whpx-accel-ops.c | 3 +++ 9 files changed, 21 insertions(+), 4 deletions(-)
Re: [PATCH v4 58/65] accel: Always register AccelOpsClass::get_elapsed_ticks() handler
In reply to Philippe Mathieu-DaudéQuoted 10 lines · Philippe Mathieu-Daudé
In order to dispatch over
AccelOpsClass::get_elapsed_ticks(), we need it always defined, not calling a hidden handler under the hood. MakeAccelOpsClass::get_elapsed_ticks()mandatory. Register the defaultcpus_kick_thread()for each accelerator.Signed-off-by Philippe Mathieu-Daudé <[email protected]>---
Quoted 11 lines
include/system/accel-ops.h | 1 + accel/hvf/hvf-accel-ops.c | 2 ++ accel/kvm/kvm-accel-ops.c | 3 +++ accel/qtest/qtest.c | 2 ++ accel/tcg/tcg-accel-ops.c | 3 +++ accel/xen/xen-all.c | 2 ++ system/cpus.c | 6 ++---- target/i386/nvmm/nvmm-accel-ops.c | 3 +++ target/i386/whpx/whpx-accel-ops.c | 3 +++ 9 files changed, 21 insertions(+), 4 deletions(-)
PATCH v4 59/65 accel: Always register AccelOpsClass::get_virtual_clock() handler
In reply to Philippe Mathieu-DaudéIn order to dispatch over AccelOpsClass::get_virtual_clock(), we need it always defined, not calling a hidden handler under the hood. Make AccelOpsClass::get_virtual_clock() mandatory. Register the default cpus_kick_thread() for each accelerator.
--- include/system/accel-ops.h | 2 ++ accel/hvf/hvf-accel-ops.c | 1 + accel/kvm/kvm-accel-ops.c | 1 + accel/tcg/tcg-accel-ops.c | 2 ++ accel/xen/xen-all.c | 1 + system/cpus.c | 7 ++++--- target/i386/nvmm/nvmm-accel-ops.c | 1 + target/i386/whpx/whpx-accel-ops.c | 1 + 8 files changed, 13 insertions(+), 3 deletions(-)
include/system/accel-ops.h +2 -0
@@ -82,6 +82,8 @@ struct AccelOpsClass {* fetch time. The set function is needed if the accelerator wants * to track the changes to time as the timer is warped through * various timer events. +* +* get_virtual_clock() is mandatory. */ int64_t (*get_virtual_clock)(void );void (*set_virtual_clock)(int64_t time);
accel/hvf/hvf-accel-ops.c +1 -0
@@ -369,6 +369,7 @@ static void hvf_accel_ops_class_init(ObjectClass *oc, const void *data) ops->update_guest_debug = hvf_update_guest_debug; ops->get_elapsed_ticks = cpu_get_ticks; + ops->get_virtual_clock = cpu_get_clock; ops->get_vcpu_stats = hvf_get_vcpu_stats; };
accel/kvm/kvm-accel-ops.c +1 -0
@@ -97,6 +97,7 @@ static void kvm_accel_ops_class_init(ObjectClass *oc, const void *data)#endif ops->get_elapsed_ticks = cpu_get_ticks; + ops->get_virtual_clock = cpu_get_clock; }static const TypeInfo kvm_accel_ops_type = {
accel/tcg/tcg-accel-ops.c +2 -0
@@ -207,6 +207,7 @@ static void tcg_accel_ops_init(AccelClass *ac) ops->kick_vcpu_thread = mttcg_kick_vcpu_thread; ops->handle_interrupt = tcg_handle_interrupt; ops->get_elapsed_ticks = cpu_get_ticks; + ops->get_virtual_clock = cpu_get_clock; }else { ops->create_vcpu_thread = rr_start_vcpu_thread; ops->kick_vcpu_thread = rr_kick_vcpu_thread;
@@ -217,6 +218,7 @@ static void tcg_accel_ops_init(AccelClass *ac) ops->get_elapsed_ticks = icount_get; }else { ops->handle_interrupt = tcg_handle_interrupt; + ops->get_virtual_clock = cpu_get_clock; ops->get_elapsed_ticks = cpu_get_ticks; } }
accel/xen/xen-all.c +1 -0
@@ -158,6 +158,7 @@ static void xen_accel_ops_class_init(ObjectClass *oc, const void *data) ops->kick_vcpu_thread = cpus_kick_thread; ops->handle_interrupt = generic_handle_interrupt; ops->get_elapsed_ticks = cpu_get_ticks; + ops->get_virtual_clock = cpu_get_clock; }static const TypeInfo xen_accel_ops_type = {
system/cpus.c +4 -3
@@ -216,10 +216,10 @@ int64_t cpus_get_virtual_clock(void)* * XXX */ -if (cpus_accel && cpus_accel->get_virtual_clock) { -return cpus_accel->get_virtual_clock (); +if (!cpus_accel) { +return cpu_get_clock (); } -return cpu_get_clock (); +return cpus_accel->get_virtual_clock (); }/*
@@ -666,6 +666,7 @@ void cpus_register_accel(const AccelOpsClass *ops)assert (ops->kick_vcpu_thread);assert (ops->handle_interrupt);assert (ops->get_elapsed_ticks); +assert (ops->get_virtual_clock); cpus_accel = ops; }
target/i386/nvmm/nvmm-accel-ops.c +1 -0
@@ -86,6 +86,7 @@ static void nvmm_accel_ops_class_init(ObjectClass *oc, const void *data) ops->synchronize_pre_loadvm = nvmm_cpu_synchronize_pre_loadvm; ops->get_elapsed_ticks = cpu_get_ticks; + ops->get_virtual_clock = cpu_get_clock; }static const TypeInfo nvmm_accel_ops_type = {
target/i386/whpx/whpx-accel-ops.c +1 -0
@@ -89,6 +89,7 @@ static void whpx_accel_ops_class_init(ObjectClass *oc, const void *data) ops->synchronize_pre_loadvm = whpx_cpu_synchronize_pre_loadvm; ops->get_elapsed_ticks = cpu_get_ticks; + ops->get_virtual_clock = cpu_get_clock; }static const TypeInfo whpx_accel_ops_type = {
Signature · 1 line
2.49.0
Re: [PATCH v4 59/65] accel: Always register AccelOpsClass::get_virtual_clock() handler
Quoted 4 lines · Philippe Mathieu-Daudé
In order to dispatch over
AccelOpsClass::get_virtual_clock(), we need it always defined, not calling a hidden handler under the hood. MakeAccelOpsClass::get_virtual_clock()mandatory. Register the defaultcpus_kick_thread()for each accelerator.
Same same.
Quoted 12 lines
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- include/system/accel-ops.h | 2 ++ accel/hvf/hvf-accel-ops.c | 1 + accel/kvm/kvm-accel-ops.c | 1 + accel/tcg/tcg-accel-ops.c | 2 ++ accel/xen/xen-all.c | 1 + system/cpus.c | 7 ++++--- target/i386/nvmm/nvmm-accel-ops.c | 1 + target/i386/whpx/whpx-accel-ops.c | 1 + 8 files changed, 13 insertions(+), 3 deletions(-)
Re: [PATCH v4 59/65] accel: Always register AccelOpsClass::get_virtual_clock() handler
In reply to Philippe Mathieu-DaudéQuoted 6 lines · Philippe Mathieu-Daudé
In order to dispatch over
AccelOpsClass::get_virtual_clock(), we need it always defined, not calling a hidden handler under the hood. MakeAccelOpsClass::get_virtual_clock()mandatory. Register the defaultcpus_kick_thread()for each accelerator.Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Quoted 10 lines
--- include/system/accel-ops.h | 2 ++ accel/hvf/hvf-accel-ops.c | 1 + accel/kvm/kvm-accel-ops.c | 1 + accel/tcg/tcg-accel-ops.c | 2 ++ accel/xen/xen-all.c | 1 + system/cpus.c | 7 ++++--- target/i386/nvmm/nvmm-accel-ops.c | 1 + target/i386/whpx/whpx-accel-ops.c | 1 + 8 files changed, 13 insertions(+), 3 deletions(-)
Seeing the pattern in last 3 commits, I have a question regarding QOM.
Is that possible to get a constructor called for parent type (TYPE_ACCEL_OPS), where all default values would be set, and so every child class (specialized accelerator) would just need to override the field they want with their own method?
It would be more easy than explicitely setting default values in all sub classes, but maybe QOM design is limited to that.
Re: [PATCH v4 59/65] accel: Always register AccelOpsClass::get_virtual_clock() handler
In reply to Philippe Mathieu-DaudéQuoted 12 lines · Philippe Mathieu-Daudé
Date: Wed, 2 Jul 2025 20:53:21 +0200
From: Philippe Mathieu-Daudé <[email protected]>
Subject: [PATCH v4 59/65] accel: Always register
AccelOpsClass::get_virtual_clock()handler
X-Mailer: git-send-email 2.49.0In order to dispatch over
AccelOpsClass::get_virtual_clock(), we need it always defined, not calling a hidden handler under the hood. MakeAccelOpsClass::get_virtual_clock()mandatory. Register the defaultcpus_kick_thread()for each accelerator.Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Quoted 10 lines
--- include/system/accel-ops.h | 2 ++ accel/hvf/hvf-accel-ops.c | 1 + accel/kvm/kvm-accel-ops.c | 1 + accel/tcg/tcg-accel-ops.c | 2 ++ accel/xen/xen-all.c | 1 + system/cpus.c | 7 ++++--- target/i386/nvmm/nvmm-accel-ops.c | 1 + target/i386/whpx/whpx-accel-ops.c | 1 + 8 files changed, 13 insertions(+), 3 deletions(-)
Re: [PATCH v4 59/65] accel: Always register AccelOpsClass::get_virtual_clock() handler
In reply to Philippe Mathieu-DaudéQuoted 10 lines · Philippe Mathieu-Daudé
In order to dispatch over
AccelOpsClass::get_virtual_clock(), we need it always defined, not calling a hidden handler under the hood. MakeAccelOpsClass::get_virtual_clock()mandatory. Register the defaultcpus_kick_thread()for each accelerator.Signed-off-by Philippe Mathieu-Daudé <[email protected]>---
Quoted 9 lines
include/system/accel-ops.h | 2 ++ accel/hvf/hvf-accel-ops.c | 1 + accel/kvm/kvm-accel-ops.c | 1 + accel/tcg/tcg-accel-ops.c | 2 ++ accel/xen/xen-all.c | 1 + system/cpus.c | 7 ++++--- target/i386/nvmm/nvmm-accel-ops.c | 1 + target/i386/whpx/whpx-accel-ops.c | 1 + 8 files changed, 13 insertions(+), 3 deletions(-)
PATCH v4 60/65 system/memory: Restrict eventfd dispatch_write() to emulators
In reply to Philippe Mathieu-DaudéCommit 8c56c1a592b ("memory: emulate ioeventfd") added a !KVM check because the only accelerator available back then were TCG, QTest and KVM. Then commit 126e7f78036 ("kvm: require KVM_CAP_IOEVENTFD and KVM_CAP_IOEVENTFD_ANY_LENGTH") suggested '!KVM' check should be '(TCG || QTest)'. Later more accelerator were added. Implement the suggestion as a safety measure, not dispatching to eventfd when hardware accelerator is used.
--- system/memory.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-)
system/memory.c +2 -7
@@ -25,7 +25,7 @@#include "qom/object.h" #include "trace.h" #include "system/ram_addr.h" -#include "system/kvm.h" +#include "system/qtest.h" #include "system/runstate.h" #include "system/tcg.h" #include "qemu/accel.h"
@@ -1530,12 +1530,7 @@ MemTxResult memory_region_dispatch_write(MemoryRegion *mr,adjust_endianness (mr, &data, op); -/* -* FIXME: it's not clear why under KVM the write would be processed -* directly, instead of going through eventfd. This probably should -* test "tcg_enabled() || qtest_enabled()", or should just go away. -*/ -if (!kvm_enabled () && +if ((tcg_enabled () ||qtest_enabled ()) &&memory_region_dispatch_write_eventfds (mr, addr, data, size, attrs)) {return MEMTX_OK ; }
Signature · 1 line
2.49.0
PATCH v4 61/65 accel/tcg: Factor tcg_vcpu_init() out for re-use
In reply to Philippe Mathieu-Daudé--- accel/tcg/tcg-accel-ops.h | 2 ++ accel/tcg/tcg-accel-ops-mttcg.c | 4 +++- accel/tcg/tcg-accel-ops-rr.c | 4 +++- accel/tcg/tcg-accel-ops.c | 7 +++++++ 4 files changed, 15 insertions(+), 2 deletions(-)
accel/tcg/tcg-accel-ops.h +2 -0
@@ -20,4 +20,6 @@ int tcg_cpu_exec(CPUState *cpu);void tcg_handle_interrupt (CPUState *cpu,int old_mask,int new_mask);void tcg_cpu_init_cflags (CPUState *cpu,bool parallel); +int tcg_vcpu_init (CPUState *cpu); +#endif /* TCG_ACCEL_OPS_H */
accel/tcg/tcg-accel-ops-mttcg.c +3 -1
@@ -79,8 +79,10 @@ void *mttcg_cpu_thread_routine(void *arg)qemu_thread_get_self (cpu->thread); cpu->thread_id =qemu_get_thread_id (); - cpu->neg.can_do_io = true; current_cpu = cpu; + +tcg_vcpu_init (cpu); +cpu_thread_signal_created (cpu);qemu_guest_random_seed_thread_part2 (cpu->random_seed);
accel/tcg/tcg-accel-ops-rr.c +3 -1
@@ -192,7 +192,9 @@ static void *rr_cpu_thread_fn(void *arg)qemu_thread_get_self (cpu->thread); cpu->thread_id =qemu_get_thread_id (); - cpu->neg.can_do_io = true; + +tcg_vcpu_init (cpu); +cpu_thread_signal_created (cpu);qemu_guest_random_seed_thread_part2 (cpu->random_seed);
accel/tcg/tcg-accel-ops.c +7 -0
@@ -77,6 +77,13 @@ void tcg_vcpu_thread_precreate(CPUState *cpu)tcg_cpu_init_cflags (cpu, current_machine->smp.max_cpus >1 ); } +int tcg_vcpu_init (CPUState *cpu) +{ + cpu->neg.can_do_io = true; + +return 0 ; +} +void tcg_cpu_destroy (CPUState *cpu) {cpu_thread_signal_destroyed (cpu);
Signature · 1 line
2.49.0
PATCH v4 62/65 accel/tcg: Factor mttcg_cpu_exec() out for re-use
In reply to Philippe Mathieu-Daudé--- accel/tcg/tcg-accel-ops-mttcg.h | 1 + accel/tcg/tcg-accel-ops-mttcg.c | 16 ++++++++++++---- 2 files changed, 13 insertions(+), 4 deletions(-)
accel/tcg/tcg-accel-ops-mttcg.h +1 -0
@@ -14,5 +14,6 @@void mttcg_kick_vcpu_thread (CPUState *cpu);void *mttcg_cpu_thread_routine (void *arg); +int mttcg_cpu_exec (CPUState *cpu);#endif /* TCG_ACCEL_OPS_MTTCG_H */
accel/tcg/tcg-accel-ops-mttcg.c +12 -4
@@ -91,10 +91,7 @@ void *mttcg_cpu_thread_routine(void *arg) do { if (cpu_can_run(cpu)) { - int r; - bql_unlock(); - r = tcg_cpu_exec(cpu); - bql_lock(); + int r = mttcg_cpu_exec(cpu); switch (r) { case EXCP_DEBUG: cpu_handle_guest_debug(cpu);
@@ -130,3 +127,14 @@ void mttcg_kick_vcpu_thread(CPUState *cpu) {cpu_exit (cpu); } + +int mttcg_cpu_exec (CPUState *cpu) +{ +int ret; + +bql_unlock (); + ret =tcg_cpu_exec (cpu); +bql_lock (); + +return ret; +}
Signature · 1 line
2.49.0
PATCH v4 63/65 accel/tcg: Factor rr_cpu_exec() out
In reply to Philippe Mathieu-DaudéAltough we aren't going to re-use rr_cpu_exec(), factor it out to have RR implementation matches with MTTCG one.
--- accel/tcg/tcg-accel-ops-rr.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-)
accel/tcg/tcg-accel-ops-rr.c +20 -11
@@ -169,6 +169,25 @@ static int rr_cpu_count(void)return cpu_count; } +static int rr_cpu_exec (CPUState *cpu,int64_t cpu_budget) +{ +int ret; + +bql_unlock (); +if (icount_enabled ()) { +icount_prepare_for_run (cpu, cpu_budget); + } + + ret =tcg_cpu_exec (cpu); + +if (icount_enabled ()) { +icount_process_data (cpu); + } +bql_lock (); + +return ret; +} +/* * In the single-threaded case each vCPU is simulated in turn. If * there is more than a single vCPU we create a simple timer to kick
@@ -254,17 +273,7 @@ static void *rr_cpu_thread_fn(void *arg) (cpu->singlestep_enabled & SSTEP_NOTIMER) == 0);if (cpu_can_run (cpu)) { -int r; - -bql_unlock (); -if (icount_enabled ()) { -icount_prepare_for_run (cpu, cpu_budget); - } - r =tcg_cpu_exec (cpu); -if (icount_enabled ()) { -icount_process_data (cpu); - } -bql_lock (); +int r =rr_cpu_exec (cpu, cpu_budget);if (r ==EXCP_DEBUG ) {cpu_handle_guest_debug (cpu);
Signature · 1 line
2.49.0
Re: [PATCH v4 63/65] accel/tcg: Factor rr_cpu_exec() out
Quoted 7 lines · Philippe Mathieu-Daudé
Altough we aren't going to re-use
rr_cpu_exec(), factor it out to have RR implementation matches with MTTCG one.Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- accel/tcg/tcg-accel-ops-rr.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-)
Re: [PATCH v4 63/65] accel/tcg: Factor rr_cpu_exec() out
In reply to Philippe Mathieu-DaudéQuoted 5 lines · Philippe Mathieu-Daudé
Date: Wed, 2 Jul 2025 20:53:25 +0200
From: Philippe Mathieu-Daudé <[email protected]>
Subject: [PATCH v4 63/65] accel/tcg: Factorrr_cpu_exec()out
X-Mailer: git-send-email 2.49.0
Quoted 7 lines
Altough we aren't going to re-use
rr_cpu_exec(), factor it out to have RR implementation matches with MTTCG one.Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- accel/tcg/tcg-accel-ops-rr.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-)
PATCH v4 64/65 accel/tcg: Clear exit_request once in tcg_cpu_exec()
In reply to Philippe Mathieu-Daudé--- accel/tcg/tcg-accel-ops-mttcg.c | 1 - accel/tcg/tcg-accel-ops.c | 3 +++ 2 files changed, 3 insertions(+), 1 deletion(-)
accel/tcg/tcg-accel-ops-mttcg.c +0 -1
@@ -112,7 +112,6 @@ void *mttcg_cpu_thread_routine(void *arg) } } -qatomic_set_mb (&cpu->exit_request,0 );qemu_wait_io_event (cpu); }while (!cpu->unplug ||cpu_can_run (cpu));
accel/tcg/tcg-accel-ops.c +3 -0
@@ -96,6 +96,9 @@ int tcg_cpu_exec(CPUState *cpu)cpu_exec_start (cpu); ret =cpu_exec (cpu);cpu_exec_end (cpu); + +qatomic_set_mb (&cpu->exit_request,0 ); +return ret; }
Signature · 1 line
2.49.0
Quoted 1 line · Philippe Mathieu-Daudé
Missing review: 22-23, 57-59, 63
and 56!
Quoted 22 lines
Since v3:
- Addressed Richard's review commentsFew changes needed before being able to add the
split acceleration:- few method docstring added
- remove pointless stubs
- propagate soon required AccelState argument
- try to reducecurrent_accel()uses
- move declarations AccelClass <-> AccelOpsClass
- display model name in 'info cpus'
- add 'info accel' command to QMP/HMP
- makeaccel_create_vcpu_thread()more generic
- introducehwaccel_enabled()I plan to send a PR once fully reviewed.
Regards,
Phil.
PATCH v4 65/65 accel/tcg: Unregister the RCU before exiting RR thread
In reply to Philippe Mathieu-DaudéAlthough unreachable, still unregister the RCU before exiting the thread, as documented in "qemu/rcu.h":
/*
* Important !
*
* Each thread containing read-side critical sections must be registered
* with rcu_register_thread() before calling rcu_read_lock().
* rcu_unregister_thread() should be called before the thread exits. */
--- accel/tcg/tcg-accel-ops-rr.c | 2 ++ 1 file changed, 2 insertions(+)
accel/tcg/tcg-accel-ops-rr.c +2 -0
@@ -313,6 +313,8 @@ static void *rr_cpu_thread_fn(void *arg)rr_deal_with_unplugged_cpus (); } +rcu_unregister_thread (); +g_assert_not_reached (); }
Signature · 1 line
2.49.0
Re: [PATCH v4 65/65] accel/tcg: Unregister the RCU before exiting RR thread
Quoted 11 lines · Philippe Mathieu-Daudé
Although unreachable, still unregister the RCU before exiting the thread, as documented in "
qemu/rcu.h":/*
* Important !
*
* Each thread containing read-side critical sections must be registered
* withrcu_register_thread()before callingrcu_read_lock().
*rcu_unregister_thread()should be called before the thread exits. */
Quoted 5 lines
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- accel/tcg/tcg-accel-ops-rr.c | 2 ++ 1 file changed, 2 insertions(+)
This is on par with what is done for other accelerators.
Re: [PATCH v4 65/65] accel/tcg: Unregister the RCU before exiting RR thread
In reply to Philippe Mathieu-DaudéQuoted 17 lines · Philippe Mathieu-Daudé
Date: Wed, 2 Jul 2025 20:53:27 +0200
From: Philippe Mathieu-Daudé <[email protected]>
Subject: [PATCH v4 65/65] accel/tcg: Unregister the RCU before exiting RR
thread
X-Mailer: git-send-email 2.49.0Although unreachable, still unregister the RCU before exiting the thread, as documented in "
qemu/rcu.h":/*
* Important !
*
* Each thread containing read-side critical sections must be registered
* withrcu_register_thread()before callingrcu_read_lock().
*rcu_unregister_thread()should be called before the thread exits. */
Quoted 5 lines
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- accel/tcg/tcg-accel-ops-rr.c | 2 ++ 1 file changed, 2 insertions(+)