Skip to contentSkip to conversation

Added documentation for the Zynq 7000

PATCH Applied Johannes Roith 3 participants 3 messages Jul 4, 2025 – Aug 5, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Added documentation for the Zynq 7000

Added documentation and build instructions for the Zynq 7000 and the Avnet Zedboard.

---
 Documentation/boards/zynq.rst | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/boards/zynq.rst
Documentation/boards/zynq.rst new file +25 -0
new file mode 100644
index 0000000000..b7aaf3892c
@@ -0,0 +1,25 @@
+Xilinx Zynq 7000
+================
+
+Barebox has support for the Xilinx Zynq 7000.
+
+Image creation
+--------------
+
+The Zynq defconfig supports the Avnet ZedBoard. Use it to build the Barebox image::
+
+   make ARCH=arm zynq_defconfig
+   make ARCH=arm
+
+Create a FAT partition as the first partition of the SD card and copy the
+produced image ``images/barebox-avnet-zedboard.img`` into this partition.
+Rename the image to ``BOOT.bin`` which is the name the Primary Bootloader of the
+Zynq 7000 expects for the next stage.
+
+Bitstream loading
+-----------------
+
+The Zynq 7000 features an ARM Cortex-A9 processor (Processing System, PS)
+alongside a Programmable Logic (PL) component that functions as an FPGA. Barebox
+provides support for loading a bitstream into the PL through its firmware
+interface.
Signature · 1 line
2.34.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 4 lines · Johannes Roith

Added documentation and build instructions for the Zynq 7000 and the Avnet Zedboard.

Thank you!
Ahmad

Quoted 36 lines
---
 Documentation/boards/zynq.rst | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/boards/zynq.rst
Documentation/boards/zynq.rst new file +25 -0
new file mode 100644
index 0000000000..b7aaf3892c
@@ -0,0 +1,25 @@
+Xilinx Zynq 7000
+================
+
+Barebox has support for the Xilinx Zynq 7000.
+
+Image creation
+--------------
+
+The Zynq defconfig supports the Avnet ZedBoard. Use it to build the Barebox image::
+
+   make ARCH=arm zynq_defconfig
+   make ARCH=arm
+
+Create a FAT partition as the first partition of the SD card and copy the
+produced image ``images/barebox-avnet-zedboard.img`` into this partition.
+Rename the image to ``BOOT.bin`` which is the name the Primary Bootloader of the
+Zynq 7000 expects for the next stage.
+
+Bitstream loading
+-----------------
+
+The Zynq 7000 features an ARM Cortex-A9 processor (Processing System, PS)
+alongside a Programmable Logic (PL) component that functions as an FPGA. Barebox
+provides support for loading a bitstream into the PL through its firmware
+interface.
Signature · 4 lines
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |